Led open

Achetez Open Air Mining Miner Rig Case + 4 Fans Led Pr Crypto Coin 6 Gpu Atx Matx au meilleur prix sur Rakuten. Profitez de l'Achat-Vente Garanti ! Expédition depuis la Chine - Livraison sous 10 à 20 jours ouvrés. Produits tout à fait neufs. Service Après-Vente Excellent.

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 02-avr.-19 à 09:52:29 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 05-sept.-19 à 22:14:30 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 04-sept.-19 à 18:24:09 Paris, le vendeur a ajouté les informations suivantes:

540mm LED Backlight Strip Kit For 24" inch Update CCFL LCD Screen To MonitWFFR Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 22-août-19 à 10:39:35 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Le 24-déc.-18 à 13:37:18 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 02-avr.-19 à 12:08:11 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 01-avr.-19 à 13:08:56 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 09-mai-19 à 05:43:10 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-mai-19 à 09:56:09 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-mai-19 à 07:54:08 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-juin-19 à 13:31:05 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 08-juil.-19 à 08:14:13 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Le 20-juil.-19 à 16:13:15 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 17-juil.-19 à 09:19:16 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 13-juil.-19 à 14:54:17 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 13-juil.-19 à 04:59:04 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 19-août-19 à 13:43:11 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable -Nous acceptons seulement le paiement Paypal. - acheteurs   internationaux - veuillez   noter: a) les taxes et frais d'importation ne sont pas inclus dans le prix de l'article ou les frais d'expédition.  Ces   charges   sont   la   responsabilité   de   l' acheteur. b) Veuillez vérifier auprès du Bureau de douane de votre pays pour déterminer ce que ces coûts supplémentaires seront avant d'enchérir/acheter. * Nous ne pouvons pas expédier aux cases postales ou aux adresses d'APO/FPO Merci!     Le 23-août-19 à 18:22:31 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 03-sept.-19 à 19:13:32 Paris, le vendeur a ajouté les informations suivantes:

Achetez Elo 4243L IntelliTouch Dual Touch - Écran LED au meilleur prix ELO TS PE - OPEN FRAME TOUCH DISPL Elo 4243L IntelliTouch Dual Touch - Écran LED - 42" - cadre ouvert - écran tactile - 1920 x 1080 Ful 4243L LCD OPEN FRAME/FULL HDLED/VGA/HDMI/INTELLITOUCH PLUS IN Stock-Bureau, votre référence en articles de...

Elo 4243L IntelliTouch Dual Touch - Écran LED - 42 ELO TS PE - OPEN FRAME TOUCH DISPL Elo 4243L IntelliTouch Dual Touch - Écran LED - 42" - cadre ouvert - écran tactile - 1920 x 1080 Ful 4243L LCD OPEN FRAME/FULL HDLED/VGA/HDMI/INTELLITOUCH PLUS IN Stock-Bureau, votre référence en articles de...

Lire la suite Ecran PC Iiyama 32"WIDE LCD Open Frame Projective iiyama ProLite TF3239MSC-B1AG. Taille de l'écran: 80 cm (31.5"), Résolution de l'écran: 1920 x 1080 pixels, Type HD: Full HD, Technologie d'affichage: LED, Temps de réponse: 8 ms, Format d'image: 16:9, Angle de vision horizontal: 178°, Angle de vision vertical: 178°. Haut-parleurs intégrés. Montage VESA. Couleur du produit: Noir AFFICHER LA SUITE MASQUER LA SUITE Voir tous les articles Iiyama Voir les autres ecran pc Iiyama Détails Techniques Détails techniques ÉCRAN Pas de pixel: 0,364 x 0,364 Taux de contraste: 3000:1 Angle de vision horizontal: 178 ° Angle de vision vertical: 178 ° Taille visualisable horizontale: 69,8 mm Taille visualisable verticale: 39,3 mm Taille de l'écran: 80 " Luminosité de l'écran: 500 cd/m² Temps de réponse: 8 ms Résolution de l'écran: 1920 x 1080 Fréquence numérique horizontale: 30 - 83 Fréquence de balayage vertical: 50 - 76 Diagonale d'écran (cm): 80 cm Écran tactile: Oui Rétroéclairage à LED: Oui Taux de d'actualisation maximal: 60 Hz Technologie tactile: Plusieurs pressions Technologie écran tactile: Technologie capacitive projetée Type d'écran tactile: Multi-utilisateur Technologie d'affichage: LED Nombre de points de contact simultanés: 12 Format d'image: 16:9 Type HD: Full HD Type de panneau: AMVA3 Forme d'écran: Plat Nombre de couleurs affichées: 16,78 millions de couleurs REPRÉSENTATION / RÉALISATION NVIDIA G-SYNC: Non AMD FreeSync: Non MULTIMÉDIA Microphone intégré: Non Puissance évaluée de RMS: 16 W Haut-parleurs intégrés: Oui Appareil photo intégré: Non Nombre de haut-parleurs: 2 DESIGN Certification: CB, CE, EAC, RoHS, ErP, WEEE, cULus, REACH Couleur du produit: Noir Matériau du boîtier/corps: Métal Code (IP) Internationale Protection: IP54 Épaisseur du verre: 2 mm CONNECTIVITÉ Entrée audio: 1 Sortie audio: 1 Port DVI: Non Nombre de ports VGA (D-Sub): 1 Quantité de ports HDMI: 2 HDMI: Oui HDCP: Oui Quantité d'interface DisplayPorts: 1 RS-232C: Oui Port tactile USB: Oui ERGONOMIE Plug and Play: Oui Voyants: Oui Montage mural: Oui Affichage à l'écran (OSD): Oui Norme VESA: 400 x 200 Affichage multilingue à l'écran: Allemand, Néerlandais, Anglais, Espagnol, Français, Italien, Polonais, Russe Nombre de langues OSD: 8 Montage VESA: Oui PUISSANCE Consommation électrique typique: 60 W Type d'alimentation d'énergie: Secteur Consommation électrique (arrêt): 0,3 W Consommation d'énergie (mode veille): 1,5 W Fréquence d'entrée AC: 50/60 Tension d'entrée AC: 100 - 240 Plage d’efficacité énergétique: A à G Classe d'efficacité énergétique (SDR): G Consommation d'énergie (SDR) pour 1000 heures: 55 kWh CONDITIONS ENVIRONNEMENTALES Température hors fonctionnement: -20 - 60 Température d'opération: 0 - 40 RÉSEAU Ethernet/LAN: Non CONTENU DE L'EMBALLAGE Câbles inclus: Secteur, DisplayPort, HDMI, USB DURABILITÉ Conformité à la durabilité: Oui Certificats de durabilité: CE, REACH, RoHS POIDS ET DIMENSIONS Poids (sans support): 13800 g Hauteur (sans support): 439.9 mm Largeur (sans support): 738.7 mm Profondeur (sans support): 67 mm INFORMATIONS SUR L'EMBALLAGE Poids du paquet: 17,2 g Profondeur du colis: 590 mm Hauteur du colis: 900 mm Largeur du colis: 187 mm AUTRES CARACTÉRISTIQUES Temps moyen entre pannes: 50000 h Nombre de port ethernet LAN (RJ-45): 1 DONNÉES LOGISTIQUES Code du système harmonisé: 85285210 Code EAN 4948570118021 Référence produit 06202707 Référence constructeur TF3239MSC-B1AG Les top ventes En savoir + Ecran PC Samsung SmartMonitor M5 27" 184 € 99 En savoir + Ecran PC Philips E Line 272E1GAJ/00 194 € 90 En savoir + Ecran PC Philips Momentum 27" 27M1C5500VL/00 239 € 99 En savoir + Ecran PC Samsung S24R35AFHU - 24" VA/4ms/FHD/HDMI/VGA/75Hz 124 € 99 En savoir + Ecran PC MSI PRO MP241X 119 € 99 En savoir + Ecran PC Iiyama RedEagle G-Master G2470HSU-B1 169 € 99 Produits associés En savoir + Accessoire écran Targus Privacy Screen 21.5" Widescreen 16:9 23 € 95 En savoir + Commutateur et splitter Splitter HDMI - 2 écrans simultanés 9 € 99 En savoir + Hub Hub 4 ports USB2 5 € 99 En savoir + Nettoyage Airsec Bombe air sec jet puissant 400G net AIRZE 19 € 99 Recherches associées écran PC gamer écran PC ultrawide écran PC 27" écran 4k écran PC incurvé support mural support de bureau écran aoc écran samsung écran msi écran asus écran PC 1 ms

/n /n /n Lire la suite /n /n /n /n /n /n /n Iiyama 32"WIDE LCD Open Frame Projective /n /n iiyama ProLite TF3239MSC-B1AG. Taille de l/'/xc3/xa9cran: 80 cm (31.5"), R/xc3/xa9solution de l/'/xc3/xa9cran: 1920 x 1080 pixels, Type HD: Full HD, Technologie d/'affichage: LED, Temps de r/xc3/xa9ponse: 8 ms, Format d/'image: 16:9, Angle de vision horizontal: 178/xc2/xb0, Angle de vision vertical: 178/xc2/xb0. Haut-parleurs int/xc3/xa9gr/xc3/xa9s. Montage VESA. Couleur du produit: Noir /n /n /n /n /nAFFICHER LA SUITE/n /n /nMASQUER LA SUITE/n /n /n /n /n /n/n/n /n /n /n Voir tous les articles Iiyama /n /n /n Voir les autres ecran pc Iiyama /n /n /n /n/n /n/n /n /n /n /n /n /n /n D/xc3/xa9tails Techniques /n /n D/xc3/xa9tails techniques /n /n /n /n /xc3/x89CRAN Pas de pixel: 0,364 x 0,364 Taux de contraste: 3000:1 Angle de vision horizontal: 178 /xc2/xb0 Angle de vision vertical: 178 /xc2/xb0 Taille visualisable horizontale: 69,8 mm Taille visualisable verticale: 39,3 mm Taille de l/'/xc3/xa9cran: 80 " Luminosit/xc3/xa9 de l/'/xc3/xa9cran: 500 cd/m/xc2/xb2 Temps de r/xc3/xa9ponse: 8 ms R/xc3/xa9solution de l/'/xc3/xa9cran: 1920 x 1080 Fr/xc3/xa9quence num/xc3/xa9rique horizontale: 30 - 83 Fr/xc3/xa9quence de balayage vertical: 50 - 76 Diagonale d/'/xc3/xa9cran (cm): 80 cm /xc3/x89cran tactile: Oui R/xc3/xa9tro/xc3/xa9clairage /xc3/xa0 LED: Oui Taux de d/'actualisation maximal: 60 Hz Technologie tactile: Plusieurs pressions Technologie /xc3/xa9cran tactile: Technologie capacitive projet/xc3/xa9e Type d/'/xc3/xa9cran tactile: Multi-utilisateur Technologie d/'affichage: LED Nombre de points de contact simultan/xc3/xa9s: 12 Format d/'image: 16:9 Type HD: Full HD Type de panneau: AMVA3 Forme d/'/xc3/xa9cran: Plat Nombre de couleurs affich/xc3/xa9es: 16,78 millions de couleurs REPR/xc3/x89SENTATION / R/xc3/x89ALISATION NVIDIA G-SYNC: Non AMD FreeSync: Non MULTIM/xc3/x89DIA Microphone int/xc3/xa9gr/xc3/xa9: Non Puissance /xc3/xa9valu/xc3/xa9e de RMS: 16 W Haut-parleurs int/xc3/xa9gr/xc3/xa9s: Oui Appareil photo int/xc3/xa9gr/xc3/xa9: Non Nombre de haut-parleurs: 2 DESIGN Certification: CB, CE, EAC, RoHS, ErP, WEEE, cULus, REACH Couleur du produit: Noir Mat/xc3/xa9riau du bo/xc3/xaetier/corps: M/xc3/xa9tal Code (IP) Internationale Protection: IP54 /xc3/x89paisseur du verre: 2 mm CONNECTIVIT/xc3/x89 Entr/xc3/xa9e audio: 1 Sortie audio: 1 Port DVI: Non Nombre de ports VGA (D-Sub): 1 Quantit/xc3/xa9 de ports HDMI: 2 HDMI: Oui HDCP: Oui Quantit/xc3/xa9 d/'interface DisplayPorts: 1 RS-232C: Oui Port tactile USB: Oui ERGONOMIE Plug and Play: Oui Voyants: Oui Montage mural: Oui Affichage /xc3/xa0 l/'/xc3/xa9cran (OSD): Oui Norme VESA: 400 x 200 Affichage multilingue /xc3/xa0 l/'/xc3/xa9cran: Allemand, N/xc3/xa9erlandais, Anglais, Espagnol, Fran/xc3/xa7ais, Italien, Polonais, Russe Nombre de langues OSD: 8 Montage VESA: Oui PUISSANCE Consommation /xc3/xa9lectrique typique: 60 W Type d/'alimentation d/'/xc3/xa9nergie: Secteur Consommation /xc3/xa9lectrique (arr/xc3/xaat): 0,3 W Consommation d/'/xc3/xa9nergie (mode veille): 1,5 W Fr/xc3/xa9quence d/'entr/xc3/xa9e AC: 50/60 Tension d/'entr/xc3/xa9e AC: 100 - 240 Plage d/xe2/x80/x99efficacit/xc3/xa9 /xc3/xa9nerg/xc3/xa9tique: A /xc3/xa0 G Classe d/'efficacit/xc3/xa9 /xc3/xa9nerg/xc3/xa9tique (SDR): G Consommation d/'/xc3/xa9nergie (SDR) pour 1000 heures: 55 kWh CONDITIONS ENVIRONNEMENTALES Temp/xc3/xa9rature hors fonctionnement: -20 - 60 Temp/xc3/xa9rature d/'op/xc3/xa9ration: 0 - 40 R/xc3/x89SEAU Ethernet/LAN: Non CONTENU DE L/'EMBALLAGE C/xc3/xa2bles inclus: Secteur, DisplayPort, HDMI, USB DURABILIT/xc3/x89 Conformit/xc3/xa9 /xc3/xa0 la durabilit/xc3/xa9: Oui Certificats de durabilit/xc3/xa9: CE, REACH, RoHS POIDS ET DIMENSIONS Poids (sans support): 13800 g Hauteur (sans support): 439.9 mm Largeur (sans support): 738.7 mm Profondeur (sans support): 67 mm INFORMATIONS SUR L/'EMBALLAGE Poids du paquet: 17,2 g Profondeur du colis: 590 mm Hauteur du colis: 900 mm Largeur du colis: 187 mm AUTRES CARACT/xc3/x89RISTIQUES Temps moyen entre pannes: 50000 h Nombre de port ethernet LAN (RJ-45): 1 DONN/xc3/x89ES LOGISTIQUES Code du syst/xc3/xa8me harmonis/xc3/xa9: 85285210 /n /n /n /n /n /n Code EAN /n 4948570118021 /n /n /n R/xc3/xa9f/xc3/xa9rence produit /n 06202707 /n /n /n R/xc3/xa9f/xc3/xa9rence constructeur /n TF3239MSC-B1AG /n /n /n/n /n /n /n /n Caract/xc3/xa9ristiques principales /n /n /n R/xc3/xa9solution: 1920x1080 Format: 16/9 /n Voir les d/xc3/xa9tails techniques /n /n /n /n /n /n /n/n/n/n /n /n Les top ventes /n /n /n /n /n /n Ecran PC Iiyama G-MASTER GB2770HSU-B5 189 /xe2/x82/xac 90 /n Ecran PC AOC G2 24G2SPAE/BK - 23.8" FHD 165Hz IPS -9% 149 /xe2/x82/xac 90 134 /xe2/x82/xac 99 /n Ecran PC Gigabyte G34WQC A - 34" CURVE UWQHD 144Hz -5% 389 /xe2/x82/xac 90 369 /xe2/x82/xac 90 /n Ecran PC AOC G2 CU34G2X/BK - 34" UWQHD 144Hz -15% 399 /xe2/x82/xac 99 339 /xe2/x82/xac 90 /n Ecran PC Iiyama RedEagle G-Master G2470HSU-B1 144 /xe2/x82/xac 99 /n Ecran PC Iiyama RedEagle G-Master G2770HSU-B1 184 /xe2/x82/xac 90 /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n /n /n/n/n /n Produits associ/xc3/xa9s /n /n /n /n /n /n Accessoire /xc3/xa9cran Nedis Support écran à pincer - 1 écran 15 - 35" 24 /xe2/x82/xac 99 /n Commutateur et splitter Connectland Splitter HDMI 4K - 2 écrans simultanés 29 /xe2/x82/xac 99 /n Hub Hub 4 Ports USB 3.0 14 /xe2/x82/xac 99 /n Nettoyage Airsec Bombe air sec jet puissant 400G net AIRZE 19 /xe2/x82/xac 99 /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n/n /n /n /n /n/n/n /n /n /n /n /n /n Livraison suivie et rapide /n /n Retrait 1H, Coursier 2H, Express 24H, Standard, Point Relais ou sur Rendez-vous. /n /n /n /n /n /n /n Paiement s/xc3/xa9curis/xc3/xa9 et modulable /n /n Paiement via CB, PayPal, et /xc3/xa9chelonnement possible jusqu/'/xc3/xa0 24 versements (2x, 3x, 4x, 10x, 12x jusqu/'/xc3/xa0 24x). /n /n /n /n /n /n /n Nos garanties et extensions /n /n 2 ans de garantie inclus, possibilit/xc3/xa9 d/'/xc3/xa9tendre jusqu/'/xc3/xa0 5 ans avec nos extensions. /n /n /n /n /n /n /n R/xc3/xa9tractation sous 30 jours pour No/xc3/xabl /n /n Retour facile et rapide avec remboursement en cas de changement d/'avis/xc2/xa0! /n /n /n/n /n /n Recherches associ/xc3/xa9es /n /n /n /xc3/xa9cran PC gamer /n /xc3/xa9cran PC ultrawide /n /xc3/xa9cran PC 27" /n /xc3/xa9cran 4k /n /xc3/xa9cran PC incurv/xc3/xa9 /n support mural /n support de bureau /n /xc3/xa9cran aoc /n /xc3/xa9cran samsung /n /xc3/xa9cran msi /n /xc3/xa9cran asus /n /xc3/xa9cran PC 1 ms /n /n /n/n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n /n /n

/n /n /n Lire la suite /n /n /n /n /n /n /n Iiyama 32"WIDE LCD Open Frame Projective /n /n iiyama ProLite TF3239MSC-B1AG. Taille de l/'/xc3/xa9cran: 80 cm (31.5"), R/xc3/xa9solution de l/'/xc3/xa9cran: 1920 x 1080 pixels, Type HD: Full HD, Technologie d/'affichage: LED, Temps de r/xc3/xa9ponse: 8 ms, Format d/'image: 16:9, Angle de vision horizontal: 178/xc2/xb0, Angle de vision vertical: 178/xc2/xb0. Haut-parleurs int/xc3/xa9gr/xc3/xa9s. Montage VESA. Couleur du produit: Noir /n /n /n /n /nAFFICHER LA SUITE/n /n /nMASQUER LA SUITE/n /n /n /n /n /n/n/n /n /n /n Voir tous les articles Iiyama /n /n /n Voir les autres ecran pc Iiyama /n /n /n /n/n /n/n /n /n /n /n /n /n /n D/xc3/xa9tails Techniques /n /n D/xc3/xa9tails techniques /n /n /n /n /xc3/x89CRAN Pas de pixel: 0,364 x 0,364 Taux de contraste: 3000:1 Angle de vision horizontal: 178 /xc2/xb0 Angle de vision vertical: 178 /xc2/xb0 Taille visualisable horizontale: 69,8 mm Taille visualisable verticale: 39,3 mm Taille de l/'/xc3/xa9cran: 80 " Luminosit/xc3/xa9 de l/'/xc3/xa9cran: 500 cd/m/xc2/xb2 Temps de r/xc3/xa9ponse: 8 ms R/xc3/xa9solution de l/'/xc3/xa9cran: 1920 x 1080 Fr/xc3/xa9quence num/xc3/xa9rique horizontale: 30 - 83 Fr/xc3/xa9quence de balayage vertical: 50 - 76 Diagonale d/'/xc3/xa9cran (cm): 80 cm /xc3/x89cran tactile: Oui R/xc3/xa9tro/xc3/xa9clairage /xc3/xa0 LED: Oui Taux de d/'actualisation maximal: 60 Hz Technologie tactile: Plusieurs pressions Technologie /xc3/xa9cran tactile: Technologie capacitive projet/xc3/xa9e Type d/'/xc3/xa9cran tactile: Multi-utilisateur Technologie d/'affichage: LED Nombre de points de contact simultan/xc3/xa9s: 12 Format d/'image: 16:9 Type HD: Full HD Type de panneau: AMVA3 Forme d/'/xc3/xa9cran: Plat Nombre de couleurs affich/xc3/xa9es: 16,78 millions de couleurs REPR/xc3/x89SENTATION / R/xc3/x89ALISATION NVIDIA G-SYNC: Non AMD FreeSync: Non MULTIM/xc3/x89DIA Microphone int/xc3/xa9gr/xc3/xa9: Non Puissance /xc3/xa9valu/xc3/xa9e de RMS: 16 W Haut-parleurs int/xc3/xa9gr/xc3/xa9s: Oui Appareil photo int/xc3/xa9gr/xc3/xa9: Non Nombre de haut-parleurs: 2 DESIGN Certification: CB, CE, EAC, RoHS, ErP, WEEE, cULus, REACH Couleur du produit: Noir Mat/xc3/xa9riau du bo/xc3/xaetier/corps: M/xc3/xa9tal Code (IP) Internationale Protection: IP54 /xc3/x89paisseur du verre: 2 mm CONNECTIVIT/xc3/x89 Entr/xc3/xa9e audio: 1 Sortie audio: 1 Port DVI: Non Nombre de ports VGA (D-Sub): 1 Quantit/xc3/xa9 de ports HDMI: 2 HDMI: Oui HDCP: Oui Quantit/xc3/xa9 d/'interface DisplayPorts: 1 RS-232C: Oui Port tactile USB: Oui ERGONOMIE Plug and Play: Oui Voyants: Oui Montage mural: Oui Affichage /xc3/xa0 l/'/xc3/xa9cran (OSD): Oui Norme VESA: 400 x 200 Affichage multilingue /xc3/xa0 l/'/xc3/xa9cran: Allemand, N/xc3/xa9erlandais, Anglais, Espagnol, Fran/xc3/xa7ais, Italien, Polonais, Russe Nombre de langues OSD: 8 Montage VESA: Oui PUISSANCE Consommation /xc3/xa9lectrique typique: 60 W Type d/'alimentation d/'/xc3/xa9nergie: Secteur Consommation /xc3/xa9lectrique (arr/xc3/xaat): 0,3 W Consommation d/'/xc3/xa9nergie (mode veille): 1,5 W Fr/xc3/xa9quence d/'entr/xc3/xa9e AC: 50/60 Tension d/'entr/xc3/xa9e AC: 100 - 240 Plage d/xe2/x80/x99efficacit/xc3/xa9 /xc3/xa9nerg/xc3/xa9tique: A /xc3/xa0 G Classe d/'efficacit/xc3/xa9 /xc3/xa9nerg/xc3/xa9tique (SDR): G Consommation d/'/xc3/xa9nergie (SDR) pour 1000 heures: 55 kWh CONDITIONS ENVIRONNEMENTALES Temp/xc3/xa9rature hors fonctionnement: -20 - 60 Temp/xc3/xa9rature d/'op/xc3/xa9ration: 0 - 40 R/xc3/x89SEAU Ethernet/LAN: Non CONTENU DE L/'EMBALLAGE C/xc3/xa2bles inclus: Secteur, DisplayPort, HDMI, USB DURABILIT/xc3/x89 Conformit/xc3/xa9 /xc3/xa0 la durabilit/xc3/xa9: Oui Certificats de durabilit/xc3/xa9: CE, REACH, RoHS POIDS ET DIMENSIONS Poids (sans support): 13800 g Hauteur (sans support): 439.9 mm Largeur (sans support): 738.7 mm Profondeur (sans support): 67 mm INFORMATIONS SUR L/'EMBALLAGE Poids du paquet: 17,2 g Profondeur du colis: 590 mm Hauteur du colis: 900 mm Largeur du colis: 187 mm AUTRES CARACT/xc3/x89RISTIQUES Temps moyen entre pannes: 50000 h Nombre de port ethernet LAN (RJ-45): 1 DONN/xc3/x89ES LOGISTIQUES Code du syst/xc3/xa8me harmonis/xc3/xa9: 85285210 /n /n /n /n /n /n Code EAN /n 4948570118021 /n /n /n R/xc3/xa9f/xc3/xa9rence produit /n 06202707 /n /n /n R/xc3/xa9f/xc3/xa9rence constructeur /n TF3239MSC-B1AG /n /n /n/n /n /n /n /n Caract/xc3/xa9ristiques principales /n /n /n R/xc3/xa9solution: 1920x1080 Format: 16/9 /n Voir les d/xc3/xa9tails techniques /n /n /n /n /n /n /n/n/n/n /n /n Les top ventes /n /n /n /n /n /n Ecran PC Iiyama G-MASTER GB2770HSU-B5 189 /xe2/x82/xac 90 /n Ecran PC AOC G2 24G2SPAE/BK - 23.8" FHD 165Hz IPS -9% 149 /xe2/x82/xac 90 134 /xe2/x82/xac 99 /n Ecran PC AOC G2 CU34G2X/BK - 34" UWQHD 144Hz -15% 399 /xe2/x82/xac 99 339 /xe2/x82/xac 90 /n Ecran PC Iiyama RedEagle G-Master G2470HSU-B1 144 /xe2/x82/xac 99 /n Ecran PC LG UltraGear 27GP850P-B - 27" QHD Nano-IPS 165Hz 294 /xe2/x82/xac 90 /n Ecran PC Iiyama G-MASTER GB2770QSU-B5 278 /xe2/x82/xac 30 /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n /n /n/n/n /n Produits associ/xc3/xa9s /n /n /n /n /n /n Accessoire /xc3/xa9cran Nedis Support écran à pincer - 1 écran 15 - 35" 24 /xe2/x82/xac 99 /n Commutateur et splitter Connectland Splitter HDMI 4K - 2 écrans simultanés 29 /xe2/x82/xac 99 /n Hub Hub 4 Ports USB 3.0 14 /xe2/x82/xac 99 /n Nettoyage Airsec Bombe air sec jet puissant 400G net AIRZE 19 /xe2/x82/xac 99 /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n/n /n /n /n /n/n/n /n /n /n /n /n /n Livraison suivie et rapide /n /n Retrait 1H, Coursier 2H, Express 24H, Standard, Point Relais ou sur Rendez-vous. /n /n /n /n /n /n /n Paiement s/xc3/xa9curis/xc3/xa9 et modulable /n /n Paiement via CB, PayPal, et /xc3/xa9chelonnement possible jusqu/'/xc3/xa0 24 versements (2x, 3x, 4x, 10x, 12x jusqu/'/xc3/xa0 24x). /n /n /n /n /n /n /n Nos garanties et extensions /n /n 2 ans de garantie inclus, possibilit/xc3/xa9 d/'/xc3/xa9tendre jusqu/'/xc3/xa0 5 ans avec nos extensions. /n /n /n /n /n /n /n R/xc3/xa9tractation sous 14 jours /n /n Retour facile et rapide avec remboursement en cas de changement d/'avis/xc2/xa0! /n /n /n/n /n /n Recherches associ/xc3/xa9es /n /n /n /xc3/xa9cran PC gamer /n /xc3/xa9cran PC ultrawide /n /xc3/xa9cran PC 27" /n /xc3/xa9cran 4k /n /xc3/xa9cran PC incurv/xc3/xa9 /n support mural /n support de bureau /n /xc3/xa9cran aoc /n /xc3/xa9cran samsung /n /xc3/xa9cran msi /n /xc3/xa9cran asus /n /xc3/xa9cran PC 1 ms /n /n /n/n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n /n/n /n /n

HANNSPREE Moniteur Hanns-G 15.6' OPEN FRAME TOUCH LED 16/9 1920 x 1080 FULLHD HDMI + VGA Noir HO161HTB pas cher PRODUIT NEUF généralement expédié SOUS 3 jours ouvrables en ENVOI SUIVI. Envoi professionnel bien protégé.

Périphérique Périphériques Code EAN: 0843173131221 En-tête / Fabricant: Elo Ts Pe Type de Produit: Clavier Titre: 2494l 23.8in Fhd Lcd Wva Led Backlight Open Frame 10 Touch Ze

6 GPU Boîtier Minier Open Air Mining Miner Rig Case Cas Frame Aluminum +4 LED Fans Pour Bitcoin ETH Ethereum à prix bas sur Rakuten

Product Information Overview With built-in Thunderbolt technology — the fastest, most flexible I/O ever — the Apple Thunderbolt Display can do things other displays simply can’t. Of course, it delivers a brilliant viewing experience. But connect it to any Thunderbolt-enabled Mac and it becomes a plug-and-play hub for everything you do. Features include a high-resolution 2560-by-1440 LED-backlit display, a FaceTime HD camera, high-quality audio, three USB 2.0 ports, a FireWire 800 port, a Gigabit Ethernet port, and a Thunderbolt port for daisy-chaining additional high-performance devices. Thunderbolt technology built in. Thunderbolt I/O technology lets you move data between your devices and your computer with unprecedented speed. With two channels of 10-Gbps throughput in both directions, it’s up to 20 times faster than USB 2.0 and up to 12 times faster than FireWire 800. And it allows you to connect as many as six devices through a single, compact port. The ultimate docking station. With just one cable, connect any Thunderbolt-enabled Mac and get 27 inches of high-resolution screen space, high-quality audio, a FaceTime HD camera, FireWire 800 and Gigabit Ethernet ports — and a Thunderbolt port you can use to daisy-chain additional high-performance peripherals such as hard drives and video capture devices. Plug in and power up. The Thunderbolt Display includes a MagSafe connector that powers and charges your MacBook Pro or MacBook Air. 1  The connector sits on your desk, ready and waiting. No need to unwind the cord to the power adapter that came with your notebook. Leave it exactly where it is, in your bag. Made for the new MacBook family. A bigger display for your biggest ideas. Connect your Thunderbolt-enabled Mac to the Thunderbolt Display for a panoramic viewing experience unlike any other. This huge 27-inch glossy widescreen display features a cinematic 16:9 aspect ratio and an astonishing 2560-by-1440 resolution. That gives you more room to work with apps on your MacBook Air or MacBook Pro. And a worthy desktop companion to your iMac or Mac mini. LED backlighting. Full brightness with no waiting. That’s the big advantage of LED backlight technology. Unlike most displays that take time to warm up before they reach maximum brightness, an LED-backlit display is instantly on and uniformly bright. LED backlighting also gives you greater control over screen brightness. So you can tune the Thunderbolt Display to suit the ambient light in even the dimmest room. Built-in FaceTime HD camera and microphone. With the built-in FaceTime HD camera and microphone, you can connect your Mac desktop or notebook — open or closed — and make HD video calls 2  or take a few snapshots using Photo Booth. Thunderbolt Display compatibility. Thunderbolt-enabled Macs, including the current generations of MacBook Air, MacBook Pro, Mac mini, Mac Pro, and iMac are fully compatible with the Apple Thunderbolt Display. Highlights Built-in FaceTime HD camera with microphone Built-in 2.1 speaker system Colors: 16.7 million Viewing angle: 178° horizontal; 178° vertical Brightness: 375 cd/m 2 Contrast ratio: 1000:1 Kensington security slot Energy saver mode: 1W or less Compatible with VESA Mount Adapter Kit (sold separately) What’s in the Box Apple Thunderbolt Display AC power cord MagSafe connector Tech Specs Screen type: TFT Active-Matrix LCD Resolution: 2560 x 1440 pixels Contrast ratio: 1000:01 Size and weight Height: 19.35 inches (49.1 cm) Width: 25.7 inches (65 cm) Depth: 8.15 inches (20.7 cm) with stand Weight: 23.5 pounds (10.8 kg) Ports Three powered USB 2.0 ports Firewire 800 Gigabit Ethernet port Kensington lock slot Thunderbolt Camera and Microphone Built-in FaceTime HD camera with microphone Electrical Requirements Power Power: 100V to 240V AC 50-60Hz Maximum power: 250W (Thunderbolt Display while charging MacBook Pro) Environmental Requirements Operating temperature: 50° to 95° F (10° to 35° C) Storage temperature: -4° to 116° F (-40° to 47° C) Operating humidity: 20% to 80% non-condensing Maximum operating altitude: 10,000 feet (3000 m) VESA Compatibility Compatible with VESA Mount Adaptor Kit (sold separately) System Requirements OS X v10.6.8 or later Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, Mac Pro and iMac

Lire la suite AFFICHER LA SUITE MASQUER LA SUITE Voir tous les articles ViewSonic Voir les autres ecran pc ViewSonic Détails Techniques Détails techniques ÉCRAN Taux de contraste: 3000:1 Angle de vision horizontal: 178 ° Angle de vision vertical: 178 ° Luminosité de l'écran: 450 cd/m² Temps de réponse: 5 ms Résolution de l'écran: 1920 x 1080 Rapport de contraste (dynamique): 50000000:1 Résolution haute fréquence: 60 Hz Rétroéclairage à LED: Y Type de rétro: LED Technologie d'affichage: LED Format d'image: 16:9 Type HD: Full HD Type de panneau: VA Nombre de couleurs affichées: 16.78 million colours DESIGN Code (IP) Internationale Protection: IP54 Dureté de la surface: 7H REPRÉSENTATION / RÉALISATION Haut-parleurs intégrés: Y Technologie tactile: Multi-touch Nombre de haut-parleurs: 2 Nombre de points de contact simultanés: 10 CONNECTIVITÉ Sortie audio: 1 Port RS-232: 1 Quantité de ports HDMI: 1 Version HDMI: 1.4 HDMI: Y Quantité d'interface DisplayPorts: 1 ERGONOMIE Montage VESA: Y PUISSANCE Type d'alimentation d'énergie: AC Consommation d'énergie (mode veille): 0.5 W Fréquence d'entrée AC: 50/60 Tension d'entrée AC: 100 - 240 Classe d'efficacité énergétique (SDR): E CONDITIONS ENVIRONNEMENTALES Humidité relative de fonctionnement (H-H): 20 - 90 Température d'opération: 0 - 40 CERTIFICAT POIDS ET DIMENSIONS INFORMATIONS SUR L'EMBALLAGE Code EAN 0766907010466 Référence produit 06201507 Référence constructeur TD3207 Les top ventes En savoir + Ecran PC Iiyama GB2770QSU-B1 299 € 99 En savoir + Ecran PC Samsung Odyssey G5 LS27AG550EU -27"incurvé 308 € 99 En savoir + Ecran PC Iiyama G-Master Red Eagle GB2770HSU-B1 224 € 99 En savoir + Ecran PC Samsung SmartMonitor M5 27" 184 € 90 En savoir + Ecran PC Samsung S24R35AFHU - 24" VA/4ms/FHD/HDMI/VGA/75Hz 125 € 90 En savoir + Ecran PC Iiyama G-Master Red Eagle GB2760HSU-B1 197 € 90 Produits associés En savoir + Accessoire écran Kimex International Support de bureau Full Motion 2 écrans 13"- 27" 95 € 99 En savoir + Lunettes de protection Spirit Of Gamer RETINA PRO 19 € 99 En savoir + Commutateur et splitter Splitter HDMI - 2 écrans simultanés 9 € 99 En savoir + Hub Hub 4 Ports USB 3.0 14 € 99 En savoir + Nettoyage Airsec Bombe air sec jet puissant 400G net AIRZE 19 € 99 Recherches associées écran PC gamer écran PC ultrawide écran PC 27" écran 4k écran PC incurvé support mural support de bureau écran aoc écran samsung écran msi écran asus écran PC 1 ms