Three degrees when will

5W Qi Wireless Charger Module Transmitter Pcba Circuit Board With Diy Coil FE 5W QI Wireless charger module transmitter PCBA circuit board with DIY coil Specification: -100% brand new and high quality -Product Certification: CE/FCC, compatible with QI certified standards; -Standards: Qi wireless charging standard -Standby power: average power is less than 30 mW; -Conversion efficiency: greater than 73 % -Transfer distance: maximum 10mm, recommended transceiver distance 2 mm~4 mm -5W Qi Wireless Charger PCBA Circuit Board with Coil Wireless Charging Pad DIY,allows to charge for any Qi-enabled device. -Input voltage: DC4.3V~5.5V/1.5~2A, over this range of voltage alarm and stop charging; -Output voltage: 5V±0.1V; Charging current: 500mAh-1000mAh;Charging power: maximum can reach 5 W -Over temperature protection: when the temperature is higher than 60 degrees,it will automatically stop charging for 1 minute, and then the temperature is lower, it will re-charge. -Over current protection: when the current is over 1.5A, it will automatically stop charging to avoid damage the electrical devices. Package Includes:1x Wireless Charger PCBA Circuit Board with Coil Le 18-juil.-19 à 05:57:27 Paris, le vendeur a ajouté les informations suivantes:

Standard Qi fast wireless charger module transmitter PCBA circuit board + coil Specification: -100% brand new and high quality -Standby power: average power is less than 50 mW; -Conversion efficiency: greater than 73 % -Transfer distance: maximum 10mm, recommended transceiver distance 2 mm~8 mm -Product Certification: CE/FCC, compatible with QI certified standards; -Standards: Qi wireless charging standard -Input voltage: DC5V 0.5~0A, over this range of voltage alarm and stop charging -Over temperature protection: when the temperature is higher than 60 degrees, -it will automatically stop charging for 1 minute, and then the temperature is lower, it will re-charge. -Over current protection: when the current is over 2A, it will automatically stop charging to avoid damage the electrical devices. Certification: CE/FCC, compatible with QI certified standards; Standards: Qi wireless charging standard Package Includes:1x Wireless Charger PCBA Circuit Board with Coil DIY Le 24-déc.-19 à 17:49:12 Paris, le vendeur a ajouté les informations suivantes:

Car Suction Cup Mount with GPS Receiver Module Micro USB Port for Vatrue Dash Cam N2 / N2 Pro / X3 / R3 GPS Mount PROVENANCE:   FR AN CE   Car Suction Cup Mount with GPS Receiver Module Micro USB Port for Vatrue Dash Cam N2 / N2 Pro / X3 / R3 GPS Mount ***ATTENT!ON !!!: LE SEUL PRODUIT 100% ORIGINAL *** Car Suction Cup Mount with GPS Receiver Module Micro USB Port for Vatrue Dash Cam N2 / N2 Pro / X3 / R3 GPS Mount ORIGINAL & ÉTAT NEUF - Car Suction Cup Mount with GPS Receiver Module Micro USB Port for Vatrue Dash Cam N2 / N2 Pro / X3 / R3 GPS Mount... Car Suction Cup Mount with GPS Receiver Module Micro USB Port for Vatrue Dash Cam N2 / N2 Pro / X3 / R3 GPS Mount ***LIVRAISON EXPRESS - ULTRA RAPIDE*** Car Suction Cup Mount with GPS Receiver Module Micro USB Port for Vatrue Dash Cam N2 / N2 Pro / X3 / R3 GPS Mount • • • • Car Suction Cup Mount with GPS Receiver Module Micro USB Port for Vatrue Dash Cam N2 / N2 Pro / X3 / R3 GPS Mount Vendeur: Français Qualité: 100% Original et Authentique Livraison: Express État: Neuf Car Suction Cup Mount with GPS Receiver Module Micro USB Port for Vatrue Dash Cam N2 / N2 Pro / X3 / R3 GPS Mount Couleur: GPS for N2 -When the power cable has been routed, place the suction cup behind the rear view mirror. -Before placing the suction mount onto the windscreen make sure the bracket is at 90 degrees. When it locks out and becomes straight,it will create a strong suction hold. -The power cable must be plugged into the top of the mount. This will power the GPS module which is integrated into the suction mount. -Clip the dash cam body into the bottom of the suction mount. -To unclip the dash cam body, push the small tab up. The body can be pulled free from the mount. Suction Cup Mount with GPS Receiver Module for Vatrue Dash Cam N2 / N2 Pro / X3 / R3 GPS Mount Make sure to insert dash cam into the GPS suction mount ALL THE WAY IN until it clicks and locks. Car Suction Cup Mount with GPS Receiver Module Micro USB Port for Vatrue Dash Cam N2 / N2 Pro / X3 / R3 GPS Mount

Quick charge: It is comfortable, the smartphone without a cable wirelessly to charging. Are easily your mobile phone on the wireless charging pad. Charging cable is no longer required unplugging. It fits on all type, was Wireless charge your mobile phone unterstützen. e.g. iPhone 8/iPhone 8 plus/iPhone x/Samsung Galaxy Note 8/S8/S8 + S6/S7/S7 edge/S6/Edge/S6 edge + Note 5 Stylish and ultra slim design: Matte surface of the non-slip, Pasd Greifft your your phone case more stable. Classy doesn't only cheaper charging of experience, but also your electronic consumer experience Verbeseern. Charging level Bilinkt LED Blue Light and Standbyzustand without light. Smart Monitor Charging Level: The energy-saving idle mode saves energy and specifically designed to shelter your devices to prevent overcharging. Built-in, short circuit protection design Überhiztungschutz. Quick charge time only requires 120 min – that after the death of test data. Product Size: Diameter – 89.5 mm; Thick; 7.0 mm; with Unterpad total 8 mm. Input: 5 V/2 A 9 V/1.7 A; Output: 10 W (maximum); Transfer Rate: ≤ 6 mm; Charging Rate: ≥ 70%; Interface: Type – C Ossky fast charge sync with the latest Qi – Certified Charging Technology. Use safe and secure Creative design for charging method Fast wireless charger offer very for easy and Schnellers charging experience, inductive charging technology charge your mobile phone Easy. Simply place your mobile phone on the docking station and the charging beginnt. Universal Charging Base Ideal for the office, on your bedside table, your desk and makes your charging experience more convenient and practical. Do you need charging cable – unplugging it doesn't. The inductive charger Quick Ladest support all Apple iPhone 4/4S, which Schnelllademodus supports. It also supports the normal Lademodus. If you want to use Schnelllademodus, please use QC 2.0/3.0 adaptor (5 V/2 A), the original mobile phone charger provides only (5 V/1 A). Little tips for optimum use – Our Charger has larger sensor distance than other wireless, it can also be with the case on and charging. But please note that the thickness of the mobile phone case crossing not 8 mm, Best Not phone tube or ultra slim mobile phone case – your mobile phone will be a bit hot while charging, this is normal, 45 degrees, when the wireless charger Quick charge, if you do not quick charging, the Temoeratur is about 35 to 40 ℃ Compatible with It is best for iphone 8/iPhone 8 plus/iPhone x/Samsung Galaxy Note 8.0 Tablet S8/S8/+/S7/S7 edge/S6/S6 edge/S6 edge + Note 5. Box Contents 1 x Wireless Charger 1 x User Guide 1 x Type C USB Cable

1 x Mini Global Tracker 1 x User Manual 1 x USB Cable Site web + Android App: http://gpsui.net Mini A8 GPS Tracker Mini Global Real Time GSM/GPRS/GPS Tracking Device With SOS Button GPS Geographic Location: Europe The GPS tracker is designed for use in any vehicle to track their location, such as caravans, boats, motor homes, trucks,for vans and construction machinery and many more - live tracking possibilities are limitless. This is particularly useful if your vehicle, pets, child or your belongings have been stolen. Time to enjoy the benefits this GPS tracker brings! Specifications: Size: 43.2 x 32 x 13.6 mm Weight: 30g Connection: GSM / GPRS GSM Frequency: 850/900/1800/1900 MHz Charger Input: AC110-220V 50/60 Hz Charger Output: DC5V 350mA Battery: Rechargeable battery 3.7V 350mA Li-ion battery Storage Temperature: -40 to 80 degrees Working Temperature: -20 to 55 degrees Accuracy of positioning: 100M-1000M Hunidity: 5%-95% non-condensing How does it work: It's simple. Your surveillance operation will be underway in 4 simple steps: Insert a mobile phone SIM card in the device (E.G. free PAYG SIM card from O2 etc) Conceal the device where it cant be seen... Dial the pay as you go number from your phone..... Listen - now you can hear what they are really talking about... Power on: open the back cover, put the SIM card into the seats, then it is automatically power on. When booting, indicator will light for 10 seconds, after the indicator is off, cover the back cover then it can be used. Environmental monitoring: starting up normally, dial alarm number, it will be easy to hear the situation within 10 miters around the machine after waiting for five seconds. Sound control dialing: use mobile phones or fixed-line to get through SIM card number in the alarm, hang up the machine when hearing the sound of the machine about 3 seconds, and that means it sets up successfully. When there is a sound above 45 db within 10 miters around the alarm, the call will be automatically make call number which you set before. Send 0000 SMS to turn off sound control function. Send 1111 SMS to turn on sound control function. LBS positioning: please directly edit capital letters“DW” SMS to the alarm in China, and on aboard please edit capital letters “GPS”to the alarm,The alarm will revert a message including the information about addresses/longitude and latitude/web site content in a minute. SOS Emergency call: Edit the content of messages capital letters“SOS”to alarm, directly press the key SOS above three seconds after the success of seting, the alarm will directly call the seting number. And the indicator will flash. Note: This product does not rely on GPS positioning, rely on the GSM/GPRS baseband station location. As to the review of my customers,this Mini A8 Tracker could not be used in El Salvador/Slovakia/Spain/UK/Sri Lanka,due to the GPRS Network.

1 x Mini Global Tracker 1 x User Manual 1 x USB Cable Site web + Android App: http://gpsui.net Mini A8 GPS Tracker   Global Real Time GSM/GPRS/GPS Tracking Device With SOS Button GPS Geographic Location: Europe The GPS tracker is designed for use in any vehicle to track their location, such as caravans, boats, motor homes, trucks,for vans and construction machinery and many more - live tracking possibilities are limitless. This is particularly useful if your vehicle, pets, child or your belongings have been stolen. Time to enjoy the benefits this GPS tracker brings! Specifications: Size: 43.2 x 32 x 13.6 mm Weight: 30g Connection: GSM / GPRS GSM Frequency: 850/900/1800/1900 MHz Charger Input: AC110-220V 50/60 Hz Charger Output: DC5V 350mA Battery: Rechargeable battery 3.7V 350mA Li-ion battery Storage Temperature: -40 to 80 degrees Working Temperature: -20 to 55 degrees Accuracy of positioning: 100M-1000M Hunidity: 5%-95% non-condensing How does it work: It's simple. Your surveillance operation will be underway in 4 simple steps: Insert a mobile phone SIM card in the device (E.G. free PAYG SIM card from O2 etc) Conceal the device where it cant be seen... Dial the pay as you go number from your phone..... Listen - now you can hear what they are really talking about... Power on: open the back cover, put the SIM card into the seats, then it is automatically power on. When booting, indicator will light for 10 seconds, after the indicator is off, cover the back cover then it can be used. Environmental monitoring: starting up normally, dial alarm number, it will be easy to hear the situation within 10 miters around the machine after waiting for five seconds. Sound control dialing: use mobile phones or fixed-line to get through SIM card number in the alarm, hang up the machine when hearing the sound of the machine about 3 seconds, and that means it sets up successfully. When there is a sound above 45 db within 10 miters around the alarm, the call will be automatically make call number which you set before. Send 0000 SMS to turn off sound control function. Send 1111 SMS to turn on sound control function. LBS positioning: please directly edit capital letters“DW” SMS to the alarm in China, and on aboard please edit capital letters “GPS”to the alarm,The alarm will revert a message including the information about addresses/longitude and latitude/web site content in a minute. SOS Emergency call: Edit the content of messages capital letters“SOS”to alarm, directly press the key SOS above three seconds after the success of seting, the alarm will directly call the seting number. And the indicator will flash. Note: This product does not rely on GPS positioning, rely on the GSM/GPRS baseband station location. As to the review of my customers,this Mini A8 Tracker could not be used in El Salvador/Slovakia/Spain/UK/Sri Lanka,due to the GPRS Network.

Bluetooth 5.0 écouteurs TWS sans fil écouteurs tactiles LED stéréo étanches Feature: 1.If you take out the earphone from the storage case, it will automatically power on. And if you have matched your phone, it will automatically match it without manually connecting them again. What's more, once you place it inside the case, it will power off automatically. Don't need to turn it on or off manually 2.Get rid of the press button. The touch control button can bring a touch of comfort when you need to control the earbud. In addition, by touching the earbud, you can adjust the volume immediately without taking out the phone 3.The small earbud is lightweight enough and easy to hide itself, so you can feel free to do what you intend to do whenever and wherever possible, along with the sense of comfort even after wearing it for a long time 4.As it comes with double earbuds, it allows you to share the same music with another person. What's more, you can connect two earbuds with two phones separately. To some extent, it equals two separate earphones for Bluetooth 5.Besides charging the earphone, the charging box can also charge your phone via the charging cable when in need 6.The noise reduction technology from CVC8.0 technology can smartly reduce the surrounding noise to provide clearer communication whether you are on a bus, at the airport, at the shopping mall etc. 7.Fingerprint control, noise reduction wireless headset for Bluetooth 8.HIFI subwoofer is even better, surround stereo sound 9.3000 mAh charging bin, standby up to 90 hours 10.Intelligent control chip, self-switching, automatic matching 11.Touch to adjust the volume, more convenient to use 12.A new generation of wireless noise reduction technology, the signal is more stable, and the noise reduction is clearer 13.30-degree ergonomic ear angle, small and comfortable, no feeling to wear 14.IPX7 waterproof, shallow swimming, flush cleaning Description Earbuds:0.94x0.71x0.88in Charging Case:3.2x2.1x1.1in EarbudsshWeight:4g Capacity:Earbuds:60mAh,Charging Case:3000mAh Playtime:5-6H Call / 5H Music / Up to 100H with charging case For Bluetooth Version:5.0 Operation Range:10m/33ft Waterproof Rating:IPX7 Supported Profiles:HSP/HFP/A2DP/AVRCP Style:In-Ear Communication:Wireless Plug Type:Wireless Is wireless:Yes Wireless Type:For Bluetooth Waterproof:Yes Advanced Touch Control: Tap:Answer/Hang Up,Play/Pause Double Tap:Left for Next,Right for Previous Long Press:Left for Volume Down,Right for Volume Up Long Press:Reject Calls Three Tap:Command for Siri Voice Package included: 1 x Pair of wireless headphones for Bluetooth 3 x Pair of earplugs(S/M/L) 1 x Portable charging case 1 x Micro USB charging cable 1 x User manual Moyen de Paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Conditions de vente Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Feature: 1.If you take out the earphone from the storage case, it will automatically power on. And if you have matched your phone, it will automatically match it without manually connecting them again. What's more, once you place it inside the case, it will power off automatically. Don't need to turn it on or off manually 2.Get rid of the press button. The touch control button can bring a touch of comfort when you need to control the earbud. In addition, by touching the earbud, you can adjust the volume immediately without taking out the phone 3.The small earbud is lightweight enough and easy to hide itself, so you can feel free to do what you intend to do whenever and wherever possible, along with the sense of comfort even after wearing it for a long time 4.As it comes with double earbuds, it allows you to share the same music with another person. What's more, you can connect two earbuds with two phones separately. To some extent, it equals two separate earphones for Bluetooth 5.Besides charging the earphone, the charging box can also charge your phone via the charging cable when in need 6.The noise reduction technology from CVC8.0 technology can smartly reduce the surrounding noise to provide clearer communication whether you are on a bus, at the airport, at the shopping mall etc. 7.Fingerprint control, noise reduction wireless headset for Bluetooth 8.HIFI subwoofer is even better, surround stereo sound 9.3000 mAh charging bin, standby up to 90 hours 10.Intelligent control chip, self-switching, automatic matching 11.Touch to adjust the volume, more convenient to use 12.A new generation of wireless noise reduction technology, the signal is more stable, and the noise reduction is clearer 13.30-degree ergonomic ear angle, small and comfortable, no feeling to wear 14.IPX7 waterproof, shallow swimming, flush cleaning Description Earbuds:0.94x0.71x0.88in Charging Case:3.2x2.1x1.1in EarbudsshWeight:4g Capacity:Earbuds:60mAh,Charging Case:3000mAh Playtime:5-6H Call / 5H Music / Up to 100H with charging case For Bluetooth Version:5.0 Operation Range:10m/33ft Waterproof Rating:IPX7 Supported Profiles:HSP/HFP/A2DP/AVRCP Style:In-Ear Communication:Wireless Plug Type:Wireless Is wireless:Yes Wireless Type:For Bluetooth Waterproof:Yes Advanced Touch Control: Tap:Answer/Hang Up,Play/Pause Double Tap:Left for Next,Right for Previous Long Press:Left for Volume Down,Right for Volume Up Long Press:Reject Calls Three Tap:Command for Siri Voice Package included: 1 x Pair of wireless headphones for Bluetooth 3 x Pair of earplugs(S/M/L) 1 x Portable charging case 1 x Micro USB charging cable 1 x User manual PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 26-oct.-19 à 19:07:10 Paris, le vendeur a ajouté les informations suivantes:

Description - Mount it on your bike, will convenient you to check time/map/callings/messages no matter on fine day or rain day. Compatible with: All above Mobile Phones.No need to worry anymore when you are going along a bumpy road or in a rainy day. With 360 degrees rotation you can easily adjust the bracket arm to any angle you desire. - Made of high quality material, durable and usable - Mount it on your bicycle or motorcycle's handlebar. - With inductive touch function, touch screen operation smoothly even when the device wears the case.     - Waterproof,not 100% water-proof case.It only protects in slightly water-drop or rain. - Size:    Outside:152*85*30mm     Inside :138*78*25mm - Compatible like iPhone5,HTC new one,Samsung S3 / I9300 / S2 / I9100 / S4 / I9500...... (Plz check the size before you buy) - Note:Fit bicycle handlebar with diameter of 22mm to 26mm   (7/8" to 1") - Package Content: 1x Motorcycle  Bike Mount Case for Cellphone.     Description - Mount it on your bike, will convenient you to check time/map/callings/messages no matter on fine day or rain day. Compatible with: All above Mobile Phones.No need to worry anymore when you are going along a bumpy road or in a rainy day. With 360 degrees rotation you can easily adjust the bracket arm to any angle you desire. - Made of high quality material, durable and usable - Mount it on your bicycle or motorcycle's handlebar. - With inductive touch function, touch screen operation smoothly even when the device wears the case.     - Waterproof,not 100% water-proof case.It only protects in slightly water-drop or rain. - Size:    Outside:152*85*30mm     Inside :138*78*25mm - Compatible like iPhone5,HTC new one,Samsung S3 / I9300 / S2 / I9100 / S4 / I9500...... (Plz check the size before you buy) - Note:Fit bicycle handlebar with diameter of 22mm to 26mm   (7/8" to 1") - Package Content: 1x Motorcycle  Bike Mount Case for Cellphone.   Le 07-mai-19 à 13:12:39 Paris, le vendeur a ajouté les informations suivantes:

BEST PRICING FREE SHIPPING HIGH QUALITY OMOTON Desktop Cell Phone Stand [Updated Solid Version], Advanced 4mm Thickness Aluminum Stand Holder for Switch, Mobile Phone, iPhone 11 Pro Xs Max Xr, Silver DETAILS OMOTON Desktop Cell Phone Stand [Updated Solid Version], Advanced 4mm Thickness Aluminum Stand Holder for Switch, Mobile Phone, iPhone 11 Pro Xs Max Xr, Silver Updated Solid: We adopt 4mm thickness aluminum, which is 25% times thicker than normal stand (3mm) you may ever used before and it is 3 times more stable, this might be the most solid cell phone stand you had ever tried. Wide Compatibility: Compatible with E-Readers, Nintendo Switch,Mobile Phones of any size, such as iPhone 11 Pro XS Max XR x 6 6S 7 8 Plus, Galaxy Samsung S10+ S10e S10 S9+ S9 S8+ S8 S7 Note 10 9 8, LG, Sony, Moto, LG, Google Pixel, Nexus etc, even with a heavy case on. Anti-Scratch & Anti-Slippery: It is equipped with larger silicone pads to protect your device from slipping or scratch during use. Suitable Viewing Angle: When put iPhone 11 (without case) on this stand, you can place your phone at suitable viewing angles from 40 to 45 degrees base on its 19mm long hook. Excellence on details: Similar CNC technology as Macbook adopts, you could enjoy the comfortable sense of touch even on the edge. width: 2.36 x height: 3.54 x length: 3.58 x weight: 6.3 Livraison Items located in our US warehouse will be Shipped FREE to all addresses other than APO/PO boxes in the lower 48 states via USPS or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24 hours of your payment being processed. Items located in our China warehouse will be shipped out by Air Mail to your PayPal Address within 1-3 business days after receiving your cleared payment (estimated delivery time 10-25 business days, this all depends on how busy the postal system is & by varying countries inbound customs delays). We offer free shipping worldwide (some countries are excluded). Please note that delivery time for some countries might take longer than 30 business days. Tracking number will be provided once available from our shipping partner. Please contact us if you don't receive your item by 30 business days, we will check the status and try our best to resolve any problems for you. Please note that import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to determine what these additional costs will be prior to bidding/buying, Thank you. Paiement & Retours We accept payments through PayPal, contact us to check the availability of other payment methods Return shipping is the buyer's responsibility unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested Feedback 100% Satisfaction Clients. Merci d'Avoir Acheté chez Nous! BEST PRICING FAST SHIPPING HIGH QUALITY

ESSAYÉ EN FM ET LW OK POUR LES AUTRES BANDES PAS D’ANTENNES APPROPRIÉES Année: 1976-1978? Catégorie: Récepteur de diffusion - ou passé tuner WW2 Semi-conducteurs (le compte est seulement pour des transistors) 34: Superhétérodyne, conversion double / triple; IF / IF 2000/455 kHz bandes onde Diffusion, grande longueur d'onde, morethan 2 x SW, plus FM ou UHF. détails Type de puissance et de tension Ligne / piles (tout type) / 110/220 Volt Haut-parleur aimant permanent (Dynamic Pdyn) Haut-parleur (à bobine mobile) / 4 de pouce de diamètre = 10,2 cm out Power 2 W (qualité inconnue) de Radiomuseum.org Modèle: RF-4800 LBS / DR-48 - Panasonic, Matsushita, matière divers matériaux forme Modèle de table, profil bas (grande taille). Dimensions (LHP) 480 x 200 x 355 mm / 18,9 x 7,9 x 14 pouces notes Couverture LW, BC (MW), SW 1600-30000 kHz, VHF (FM). Dessous de 3000 kHz seule conversion, au-dessus de 3000 kHz à double conversion. Compteur numérique uniquement pour les bandes 2 ondes courtes - 8. Vendu aux États - Unis en tant que RF-4800 celui ci contrairement au DR 48 ne couvre pas le pas LW). Poids net (2,2 lb = 1 kg) 8 kg / 17 lb 9,9 oz (17.621 lb) The Panasonic RF-4800 LBS has been sold in Europe as DR-48, it covers also the longwave band. The DR-48 is a quite bulky desktop receiver with it's dimensions of 48 x 20, x 35,5 cm and it's weight of 8 kg; two metal handles give protection to the front panel, when the set is turned face down - the give the set the aspect of a semiprofessional receiver. The RF-4800 can be powered from 110 / 220 V mains, from a 12 V car battery or eight UM-1 / mono cells accomodated in two battery compartments. At the left side of the frontpanel, You find the big speaker and below the mains switch, the jacks for an external speaker and a cassette recorder at further right the rotary controls for volume, bass, treble and the BFO pitch control. In the middle of the display window at the right, You find the red LED display of the frequency counter active on shortwave bands SW 2 - 7 and the auxiliary dials for long-, mediumwaves, tropical bands (SW 1) and the FM broadcast band at the left and the shortwave bands SW 2 - 7, each 4 MHz wide, at the right. In the middle of the frontpanel the huge main tuning knob is located, it is equipped with a crank and can be set to slow and fast tuning speed by pressing the knob in the centre - this knob will tune the shortwave bands. The frequency display is active on these band segments and the receiver operates as a double conversion receiver. The second smaller tuning knob tunes the long-, mediumwave, SW1 and FM broadcast bands, in these bands, the set operates as single conversion set and the frequency display is not active. The signal strength meter tends to read high, in the RF-4800 it has a white background, this is a possibility to distinguish the set from the RF-4900, the S meter of the successor comes with a black background. Below You find a row of switches: the switch to activate the AFC in FM mode selects between the two AM bandwidths in AM mode, the middle switch activates the noise limiter and the third one the BFO: use the BFO pitch control just below for an optimum BFO note when receiving CW transmissions and for optimum speech reproduction in SSB mode - voices should no sound like mickey mouse. The bandswitch for LW - MW - SW1 - FM and the band segment switch for SW 2 - 7 are located below the right auxilitary frequency dial. The frequency counter can be calibrated from a 5 or 10 MHz time signal and frequency standard transmission from WWV / WWVH or even from another station transmitting exactly on a known frequency. Tune in to "Radio Deutsche" Welle on 6075 kHz and wait for news and station identification, then tune to maximum S meter reading and use the SW 2-7 CAL control to set the frequency display exactly to display 6.075 - with this control not set correctly, the frequency displayed can be 2 - 4 kHz off the actual frequency. Keep in mind, the RF-4800 is no PLL synthesized set. In the right lower part of the front panel, You find the ANT TRIM to match an external antenna, the R.F. gain control. This should be set to maximum position or "DX" as a standard, in case of overloading of the receiver front end due to high signal level conditions in acrowded shortwave broadcast band wit ha long antenna, You can reduce the R.F. gain. In fact, this knob acts more like an attenuator as there is no switch to turn off the AGC (automated gain control) completely. Three more switches activate dial illumination, frequency display and set the S meter to indicate battery power. At the rear face of the DR-48 / RF-4800 LBS, You find the two folding out ferrite antennas for long- and mediumwaves, the international variant comes with only one ferrite antenna. Next to the antenna sockets, there is a PL / SO 239 antenna socket for SW 2 - 7. The DIN socket can be used to feed the DR-48's audio signal to a cassette recorder and also to feed a signal from an external audio source to the receiver, set the switch at the rear to "PHONO" to use the DR-48 as audio amplifier. The operation scheme of the DR-48 is quite straightforward: turn on the set, make sure the RF gain control is turned to the MAX setting, the AM bandwidth to wide and the BFO turned off. The right bandselector should be on SW 2 - 7 and the left on "2" to select the 3 - 7 MHz range, the use the big tuning knob to find the "Deutsche Welle" from Cologne on 6.075 MHz. If the signal peak is one or two kHz higher or lower then 6.075, use the SW 2-7 CAL to adjust the frequency display setting to the correct frequency. Due to it's conventional design as a double conversion receiver with a quite low first I.F. and a frequency counter, the receiver shows a certain frequency drift even after warm up, CW or radioteletype decoding with an automatic decoder and even reception of SSB signals need slight retuning of the set from time to time, automated recordings won't work properly. The skirt selectivity of the two I.F. filter's is mediocre. quite often, You hear an 5 kHz interference whistle from a adjacent channel carrier. As the receiver operates as single conversion set below 3 MHz, You might encounter mirroring or "ghost signals" appearing 900 kHz from the original signal away. As the internal ferrite antennas cannot be switched of, the DR-48 / RF-4800 is not well suited as a longwave / mediumwave DX receiver. Conclusion: the DR-48 / RF-4800 represents the state of the art from the early eighties as desktop receiver with double conversion circuitry connected to a frequency counter, stability, suppression on unwanted signals and selectivity of the I.F. filters is all below the expectations for a shortwave receiver in the 21st century. The DR-48 / RF-4800 looks very impressive and makes a decent secondary or entry level shortwave radio, for real Dxing, You would need a set with better filters, maybe a notch filter and passband tuning and a few memories to compare different frequencies. If You find a DR-48 / RF-4800 for a bargain price, get one, and You might have lot of fun with it. The technical built quality is not superior, so You might encounter some work until the receiver is running properly. In my sets, the wave band and shortwave band switches all did contact poorly and needed cleaning, as well as the AM narrow / wide switch and even the rotary volume and tone controls.

RARE Lance Johnson Engineering Kansas City KC Keyer KC-1 Excellent Condition, very clean and ready to use  Please see pictures and ask questions FREE RETURNS!! The KC1 Keyer/Frequency Counter The KC1 Keyer/Displayless Frequency Counter kit, designed and programmed by N6KR, is the perfect accessory for any QRP rig. This micro-miniature unit provides an Iambic keyer with message memory AND a Morse-code-output, universal frequency counter that reports your operating frequency to +/- 1kHz. The heart of the KC1 is a single chip, 18-pin microprocessor. The PC board is quite small--about 0.8" tall by 2.5" wide--and will work with the NorCal 40, 40A, and Sierra, as well as nearly any other QRP rig. Total current drain of the KC1 module is only 4mA, in keeping with the low-current philosophy of the Wilderness Radio product line. To simplify installation of the KC1, the Wilderness NorCal 40A and Sierra transceivers provide convenient access to all of the connection points needed. Also, the physical layout of the controls on the KC1 is compatible with both rigs. (There may be a special KC1-compatible front panel available for the '40A; contact Wilderness for more info.) The manual provides installation details for nearly all popular QRP rigs, including those from Heathkit, MJF, OHR, Small Wonders Labs, as well as rigs that have been published in QST or the ARRL Handbook. Specifications of the KC1 Keyer * 7 to 50WPM keyer w/the two most popular Iambic keying modes * multiple variable length message buffers, with a total of 50 characters of message memory and a word-repeat macro to save memory * user-settable weight and QSK delay * optional sidetone pitch (different from frequency/command mode pitch) Counter The frequency counter does not use a display. Instead, you press a button on the front panel to hear the frequency as three digits in Morse code. For example, if your operating frequency is 7.132MHz, you'll hear "132". The rig is not keyed when reporting the frequency; the KC1 generates an audio tone that is fed directly to the A.F. amplifier. Another feature of the counter is frequency search. If you press and hold the FREQ button a bit longer, you are prompted with an 'F', at which point you can enter a frequency to search for. As you turn the VFO knob, the KC1 alerts you when you reach approximately the desired frequency. The KC1 supports multiband rigs, too. You can program in up to four different VFO offsets, then use two pins on the board as band selection inputs. This is useful on rigs that cover both 80 and 40 meters, for example: you'll hear "000" as the band edge on 40 meters, and "500" as the band edge on 80 meters. Command Mode The KC1 also has a command mode, in which you can program the VFO offsets, keying weight, frequency reporting speed, and many other parameters. You use the keyer paddle to communicate with the KC1 in command mode, and the rig is not keyed--only an audio output is generated in this mode. Other Features The KC1 has a handkey input (for use in keying the rig and optional sidetone only--not for entering commands). It also has a user-definable logic-level control output. The 'A' command toggles this pin from ON (logic 1) to OFF (logic 0). You could use this to turn on a sharp CW filter, panel light, or anything else controllable with a digital signal. In effect, it gives you an extra panel switch.

Réparation sous forme d'échange Standard: Des combinés pour téléphone de voiture 8 Watt: Motorola 2700 Garantie 3 Mois (Pannes récurrentes: Problème de touches, cordons coupés, écran HS...) ------------------------------------------------------------------------------------------------ Envoyez moi votre ou vos combinés à réparer à l'adresse que je vous communiquerai lors de la confirmation d'achat. Ainsi que le paiement: soit par Paypal, soit par chèque Une fois le paiement et votre combiné reçu, je vous enverrai un combiné d'occasion et fonctionnel (Livraison incluse) ------------------------------------------------------------------------------------------------ Attention, je ne vends pas de combinés seuls J'accepte l'échange standard uniquement si les combinés à réparer sont complets ------------------------------------------------------------------------------------------------ Conditions de garantie: -La garantie pièces d'occasion 3 mois inclus une réparation après retour de la marchandise à la charge de l'acheteur. -L’application de la garantie ne prolonge pas sa durée. -La garantie prends effet 48H  après la date d'envoi du combiné fonctionnel. -La garantie ne couvre pas le cordon ni la coque extérieur du combiné. -La garantie cesse, si l'objet est détérioré ou s'il a été démonté. -La garantie cesse, si après vérification des numéros ou références, le combiné retourné n'est pas celui qui vous a été envoyé. ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------ Repair by a standard exchange For handset car phone: Motorola 2700 Warranty: 3 Months (Recurring failures: faulty buttons, cords cut, faulty screen...)   Send me your faulty handsets to the address, I will contact you in the purchase confirmation. And the payment by Paypal When i received your payment and your faulty handset, I will send you my functional handset   !! Careful: I do not sell alone handset I accept standard exchange only if the faulty handset is complete   Warranty conditions: -The warranty used parts three months included a repair after returning the item to the buyer load. -The Application of the warranty does not extend its duration. -The warranty take effect 48 hours after the mailing date of the functional handset. -The warranty does not cover the wire or outer shell of the handset. -The warranty void, if the item is damaged or has been removed. -The warranty void if after checking the numbers or references, the handset returned is not the one that was sent.

Réparation sous forme d'échange Standard: Des combinés pour téléphone de voiture 8 Watt: Motorola 2500 Garantie 3 Mois (Pannes récurrentes: Problème de touches, cordons coupés, écran HS...) ------------------------------------------------------------------------------------------------ Envoyez moi votre ou vos combinés à réparer à l'adresse que je vous communiquerai lors de la confirmation d'achat. Ainsi que le paiement: soit par Paypal, soit par chèque Une fois le paiement et votre combiné reçu, je vous enverrai un combiné d'occasion et fonctionnel (Livraison incluse) ------------------------------------------------------------------------------------------------ Attention, je ne vends pas de combinés seuls J'accepte l'échange standard uniquement si les combinés à réparer sont complets ------------------------------------------------------------------------------------------------ Conditions de garantie: -La garantie pièces d'occasion 3 mois inclus une réparation après retour de la marchandise à la charge de l'acheteur. -L’application de la garantie ne prolonge pas sa durée. -La garantie prends effet 48H  après la date d'envoi du combiné fonctionnel. -La garantie ne couvre pas le cordon ni la coque extérieur du combiné. -La garantie cesse, si l'objet est détérioré ou s'il a été démonté. -La garantie cesse, si après vérification des numéros ou références, le combiné retourné n'est pas celui qui vous a été envoyé. ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------ Repair by a standard exchange For handset car phone: Motorola 2500 Warranty: 3 Months (Recurring failures: faulty buttons, cords cut, faulty screen...)   Send me your faulty handsets to the address, I will contact you in the purchase confirmation. And the payment by Paypal When i received your payment and your faulty handset, I will send you my functional handset   !! Careful: I do not sell alone handset I accept standard exchange only if the faulty handset is complete   Warranty conditions: -The warranty used parts three months included a repair after returning the item to the buyer load. -The Application of the warranty does not extend its duration. -The warranty take effect 48 hours after the mailing date of the functional handset. -The warranty does not cover the wire or outer shell of the handset. -The warranty void, if the item is damaged or has been removed. -The warranty void if after checking the numbers or references, the handset returned is not the one that was sent.

Réparation sous forme d'échange Standard: Des combinés pour téléphone de voiture 8 Watt: Motorola 2200 Garantie 3 Mois (Pannes récurrentes: Problème de touches, cordons coupés, écran HS...) ------------------------------------------------------------------------------------------------ Envoyez moi votre ou vos combinés à réparer à l'adresse que je vous communiquerai lors de la confirmation d'achat. Ainsi que le paiement: soit par Paypal, soit par chèque Une fois le paiement et votre combiné reçu, je vous enverrai un combiné d'occasion et fonctionnel (Livraison incluse) ------------------------------------------------------------------------------------------------ Attention, je ne vends pas de combinés seuls J'accepte l'échange standard uniquement si les combinés à réparer sont complets ------------------------------------------------------------------------------------------------ Conditions de garantie: -La garantie pièces d'occasion 3 mois inclus une réparation après retour de la marchandise à la charge de l'acheteur. -L’application de la garantie ne prolonge pas sa durée. -La garantie prends effet 48H  après la date d'envoi du combiné fonctionnel. -La garantie ne couvre pas le cordon ni la coque extérieur du combiné. -La garantie cesse, si l'objet est détérioré ou s'il a été démonté. -La garantie cesse, si après vérification des numéros ou références, le combiné retourné n'est pas celui qui vous a été envoyé. ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------ Repair by a standard exchange For handset car phone: Motorola 2200 Warranty: 3 Months (Recurring failures: faulty buttons, cords cut, faulty screen...)   Send me your faulty handsets to the address, I will contact you in the purchase confirmation. And the payment by Paypal When i received your payment and your faulty handset, I will send you my functional handset   !! Careful: I do not sell alone handset I accept standard exchange only if the faulty handset is complete   Warranty conditions: -The warranty used parts three months included a repair after returning the item to the buyer load. -The Application of the warranty does not extend its duration. -The warranty take effect 48 hours after the mailing date of the functional handset. -The warranty does not cover the wire or outer shell of the handset. -The warranty void, if the item is damaged or has been removed. -The warranty void if after checking the numbers or references, the handset returned is not the one that was sent.

My IC202 for sale, I have had this for many years, I believe that originally it came from the USA. It has three crystals fitted, the usual two covering 144.00 to 144.40MHz and another covering, I think, 145.00 to 145.20. I'm not sure as I have never used this range. On my Bird power meter is is giving around 3 watts as per specification on transmit and the receive side seems to work well. It is well used and the case is not perfect! As you can see from the pictures the internal whip aerial was removed a long time ago as it either fed transverters or a linear amplifier and the battery tray was missing when I bought it. It comes with a dc power lead and a substitute microphone. Be careful to maintain the correct polarity and earthing on the external power lead. No manual but easily obtained on the internet but I've never needed to read it! I am in France at the moment but shipping is to any European country and it will be well packed. This is a few years old so no returns please, they are sturdy units and should arrive in good working order.