-
loading
Avec photo

Works correctly and


Liste des meilleures ventes works correctly and

France (Toutes les villes)
Px 30. Japanese version. Recapped. Very nice sounding device with heavy bass. Works both with standard batteries (adapter is included) then gumstick (not provide) Some defects: -one part is broken, that means you have to be very carrefull when opening the door. -sometimes when changing headphones positions on the jack you can hear some whistle -correct cosmetic conditions but for sure with wear of use Sold as is. No claims No returns. International shipping with French post including tracking number and signature. NO DELIVERY ON LOCKER!!! En savoir plus
Voir le product
Céret (Pyrénées Orientales)
Nikon AF Nikkor 50mm 1:1.8 (MK I) This Nikkor standard lens is great condition, AF works precisely and smoth. Lenses clear, no scratches, no fungus, no fog, no dust. No problem at all. This zoom provides very good quality pictures. This is a bargain for the quality you will get with this lens. The AF is almost fast than the D version. Best quality cost relation of all standard Nikon lenses (standard in the full frame digital cameras or 24x36mm analog cameras).  Metal hood and Schneider push-on front cap (very practical - much better than original hood and frontal cap). With Nikon rear cap. Works with Nikon AF-801/F-801s, F5, F-100, D2x, D3, D4, D800 Etc. Nikon cameras without built-in auto-focus motor, just in manual focus. AF Nikkor 50mm 1:1.8 specs (01) Look to my auctions. I have a lot of stuff to sell, Sunpak TTL flashes, Nikon cameras, Nikkor lenses and many things: My auctions I group all items in one shipping. Ask for rate if you buy many of my items. Shipping to Germany, Belgique, Luxembourg, Netherlands, UK, España, Italia, Portugal and Austria is 9,33€. Ukraine, Maghreb and Norway, shipping is 22,25€.
25,5 €
Voir le product
Marseille (Bouches du Rhône)
**  AUS Jena   2,8 / 180mm    M42 With 2 caps and lenshood    7 blades  ** there is some signs of use, and some little dust inside, the aperture is smooth and Zoom working correctly  and  the results  are interesting  (2 last pics)  ** It's sold " AS IS "  no return or refund  **Please see pics closely   Thanks.  **++  The cost of shipping for all the ECC Countries (europeans) with tracks, is  15 euros.   ++  For others countries USA, Asia, Russia, please send me before for  rates shipping.           ++ The payment may be  by PAYPAL or transfer bank. This item is located in France, so the shipping is made by Colissimo International  . Thanks
75 €
Voir le product
Sergeac (Dordogne)
Very nice Scott 235s amplifier - Restored - All electrolytic capacitors replaced with quality caps (Panasonic, Epcos, Wurtz, etc.) - Switches and potentiometers cleaned - New output transistors - Thermal paste replaced on output transistors - Bias trimmers and DC balance trimmers replaced and bias and DC balance adjusted to manufacturer's specifications The amplifier works perfectly and is in good cosmetic condition. The sound is detailed with nice, round bass, and the amp is surprisingly powerful. Any questions, please ask. Postage via Mondial Relay - Economy including insurance: - France: €18 - Germany, Belgium, Luxembourg, Netherlands:  €22 - United Kingdom, Spain: €26 - Italy, Portugal, Austria: €28 Colissimo (French Post Office) - includes insurance: - France: €24 - EU and Switzerland: €40 - Others: please contact me You can arrange your own courier if you wish so. Très bel amplificateur Scott 235s - Restauré - Tous les condensateurs électrolytiques remplacés (Panasonic, Wurtz, Epcos, etc.) - Interrupteurs et potentiomètres nettoyés - Transistors de puissance remplacés - Pâte thermique remplacés sur transistors de puissance - Remplacement des trimmers de courant de repos et de tension centrale et ajustement des courants de repos et des tensions centrales selon recommandations du constructeur Tout fonctionne parfaitement. L'ampli est en bon état esthétique. Le son est précis avec des basses bien présentes, et l'ampli est étonnamment puissant. Vos questions sont les bienvenues. Frais de port (Mondial Relay - avec assurance): - France: 18€ - Allemagne, Belgique, Luxembourg, Pays-Bas: 22€ - Royaume-Uni, Espagne: 26€ - Italie, Portugal, Autriche: 28€ Colissimo (avec assurance): - France: 24€ - UE et Suisse: 40€ - Autres: merci de demander
120 €
Voir le product
Sergeac (Dordogne)
Very nice Scott 235s amplifier - 1970-75 - Fully restored - All electrolytic capacitors replaced with quality caps (Panasonic, Epcos, Wurtz, etc.) - Wood panels replaced with bespoke mahogany-veneered panels - Switches and potentiometers cleaned - Thermal paste replaced on output transistors - Bias and DC trimmers replaced and bias adjusted to manufacturer's specifications The amplifier works perfectly and is in very good cosmetic condition with a few light scratches on top of the case. The amplifier will be carefully packed. Any questions, please ask. Postage via Mondial Relay - Economy including insurance: - France: €18 - Germany, Belgium, Luxembourg, Netherlands:  €22 - Spain: €26 - Italy, Portugal, Austria: €28 Colissimo (French Post Office) - includes insurance: - France: €22 - EU, UK and Switzerland: €40 - Others: please contact me You can arrange your own courier if you wish so. Très bel amplificateur Scott 235s - 1970-75 - Restauré - Tous les condensateurs électrolytiques remplacés (Panasonic, Wurtz, Epcos, etc.) - Joues en bois remplacées par de nouvelles avec plaquage acajou - Interrupteurs et potentiomètres nettoyés - Pâte thermique remplacés sur transistors de puissance - Remplacement des trimmers de courant de repos et ajustement des courants de repos selon recommandations du constructeur Tout fonctionne parfaitement. L'ampli est en très bon état esthétique avec quelques rayures superficielles sur le dessus du caisson L'amplificateur sera emballé avec soin. Vos questions sont les bienvenues. Frais de port (Mondial Relay - avec assurance): - France: 18€ - Allemagne, Belgique, Luxembourg, Pays-Bas: 22€ - Espagne: 26€ - Italie, Portugal, Autriche: 28€ Colissimo (avec assurance): - France: 22€ - UE, Royaume-Unis et Suisse: 40€ - Autres: merci de demander
150 €
Voir le product
Sergeac (Dordogne)
Very nice Scott 250s amplifier - 1973-1975 - 2x30W - Restored - All electrolytic capacitors replaced with quality caps (Panasonic, Epcos, Wurtz, Rubycon, etc.) - Switches and potentiometers cleaned - Thermal paste replaced on output transistors - Power-on bulb replaced with long-life LED - Bias trimmers replaced and bias adjusted to manufacturer's specifications - New wood side panels The amplifier works perfectly and is in good cosmetic condition, with light scratches on the top of the unit (see photos). Any questions, please ask. Postage via Mondial Relay - Economy including insurance: - France: €18 - Germany, Belgium, Luxembourg, Netherlands:  €22 - United Kingdom, Spain: €26 - Italy, Portugal, Austria: €28 Colissimo (French Post Office) - includes insurance: - France: €24 - EU and Switzerland: €40 - Others: please contact me You can arrange your own courier if you wish so. Très bel amplificateur Scott 250s - 1973-1975 - 2x30W - Restauré - Tous les condensateurs électrolytiques remplacés (Panasonic, Wurtz, Epcos, Rubycon, etc.) - Interrupteurs et potentiomètres nettoyés - Pâte thermique remplacés sur transistors de puissance - Ampoule marche/arrêt remplacée par une LED - Remplacement des trimmers de courant de repos et ajustement des courants de repos selon recommandations du constructeur - Nouvelles joues en bois Tout fonctionne parfaitement. L'ampli est en bon état esthétique, avec des rayures sur le dessus (voir photos). Vos questions sont les bienvenues. Frais de port (Mondial Relay - avec assurance): - France: 18€ - Allemagne, Belgique, Luxembourg, Pays-Bas: 22€ - Royaume-Uni, Espagne: 26€ - Italie, Portugal, Autriche: 28€ Colissimo (avec assurance): - France: 24€ - UE et Suisse: 40€ - Autres: merci de demander
180 €
Voir le product
Sergeac (Dordogne)
Very nice Rotel RA-611 amplifier - Restored - All electrolytic capacitors replaced with quality caps (Panasonic, Epcos, Wurtz, etc.) - Switches and potentiometers cleaned - Thermal paste replaced on output transistors - Bias trimmers replaced and bias adjusted to manufacturer's specifications The amplifier works perfectly and is in very good cosmetic condition. Any questions, please ask. Postage via Mondial Relay - Economy including insurance: - France: €18 - Germany, Belgium, Luxembourg, Netherlands:  €22 - Spain: €26 - Italy, Portugal, Austria: €28 Colissimo (French Post Office) - includes insurance: - France: €22 - EU, UK and Switzerland: €40 - Others: please contact me You can arrange your own courier if you wish so. Très bel amplificateur Rotel RA-610 - Restauré - Tous les condensateurs électrolytiques remplacés (Panasonic, Wurtz, Epcos, etc.) - Interrupteurs et potentiomètres nettoyés - Pâte thermique remplacés sur transistors de puissance - Remplacement des trimmers de courant de repos et ajustement des courants de repos selon recommandations du constructeur Tout fonctionne parfaitement. L'ampli est en très bon état esthétique. Vos questions sont les bienvenues. Frais de port (Mondial Relay - avec assurance): - France: 18€ - Allemagne, Belgique, Luxembourg, Pays-Bas: 22€ - Espagne: 26€ - Italie, Portugal, Autriche: 28€ Colissimo (avec assurance): - France: 22€ - UE, Royaume-Unis et Suisse: 40€ - Autres: merci de demander
180 €
Voir le product
Bayonne (Pyrénées Atlantiques)
Sony Walkman WM-EX322  The rubber belt has just been replaced with a new one, it works perfectly, and plays at the right speed.  It is in very good cosmetic condition, with belt clip.
40 €
Voir le product
Nice (Alpes Maritimes)
WORKS WELL Focus and aperture are smooth and operate well! VERY CLEAN GLASS No fungus, scratch or haze. CLEAN APERTURE BLADES No oil, very snappy. NICE COSMETIC CONDITION Slightly sign of use. See photo. With original front cap only Fast protected shipping. WORLD MEDICAL CRISIS: PACKAGE MAY TAKE FEW DAYS OR WEEKS MORE TO ARRIVE IN YOUR COUNTRY. ------------------------------------------------------------------------ FONCTIONNE BIEN Les bagues sont très fluides et tout fonctionne! LENTILLES PROPRES Pas de champignon, rayure ou brouillard. LAMELLES DE DIAPHRAGME FONCTIONELLES Pas d'huile, parfaitement réactives. BEL ETAT EXTERNE Très légères marques externes d'usure. Voir photo. Avec capuchon frontal seulement Envoi rapide et soigné. Retrait possible à Nice centre contre paiement en liquide.
18 €
Voir le product
Mulhouse (Haut Rhin)
Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303. As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds, without diluting the essential TB-303 character. MODS INCLUDE: VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob. Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods. VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob. VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff cont
220 €
Voir le product
Mulhouse (Haut Rhin)
Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303.  As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds,  without diluting the essential TB-303 character.  MODS INCLUDE:  VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob.  Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods.  VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob.  VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff con
220 €
Voir le product
Aix en Provence (Bouches du Rhône)
JVC SEA-RM20  Became To my personnal JAPAN Hifi Collection Remote System Controller / Graphic Equalizer (1986) VERY RARE JVC SEA-RM20 !!! -  EQUALIZER AND REMOTE SYSTEM CONTROLLER, TESTED OK.  État : Occasion  Service de livraison : Colissimo national & international Tested and working "Computerized Remote System Control".  Made in Japan 1980's. Works 100%, no issues.  Includes original remote control. This unit is a type of preamplifier in that you canuse it to control the volume from line input devices like CD players, tuners,tape decks, etc.  It also has a graphic equalizer with 5 memory settings and you can control all the frequencies of the EQ from the remote control whichis something I have not seen before.  You can switch to a real time spectrum analyzer display which will move to the music.   Other features include JVC's SEA "acoustic expander" which does exactly what you'd expect.  The EQ has 5 memory settings and a reverse setting aswell which instantly give you the exact opposite eq curve.   Allbuttons, controls, features, and display are working correctly.  Shows very little wear. All buttons on remote are working correctly- the remote can control other JVC components as well.    On the back are three line inputs- one labelled Audio, one labelled Video 1, and one labelled Video 2/3.  Youcould use these inputs for a tuner, a CD deck, and a tape deck.  There are also two sets of stereo outputs.  In order to use the EQ and graphic display and volume control all at the same time you need to loop the outputlabelled "Line Out" into the "Remote Contro In"-  am including the JVC instruction book and the original remote controller for this purpose. Specifications Output Level: 1V (4.5V max) Gain: ± 0dB Frequency response: 10Hz to 50kHz Signal to Noise Ratio: 100dB Total harmonic distortion: 0.03% Control Range: ± 10dB Frequency Bands: 63, 160, 400, 1K, 2.5K, 6.3K, 16KHz Dimensions: 435 x 77 x 225mm Weight: 2.6kg Finish: black Accessories: RM-S20 remote control Year: 1986
89 €
Voir le product
Rennes (Ille et Vilaine)
Selling my superb black Leica R7 and its dedicated Summicron R 50 mm E55 late version (one cam). The kit is in a real superb shape, not much marks of use, if any. Everything works as it should, it is a great kit for stunning pictures and it is quite painful to let it go. A few tiny dusts in the finder, same thing for the lens. Just load and shoot this great camera ! The meter is dead on and a real marvel for slide film thanks to its global fram metering mode. Really loved this (way simpler to expose correctly compared to my Nikon F3 for example). Please watch pictures carefully, they are part of the description. Happily ship worldwide.
690 €
Voir le product
Toulouse (Haute Garonne)
Ricoh R1 Perfect working order Body in perfect condition LCD works indications in the view finder work Previous owner has correctly glued a plastic film guiding element that was otherwise loose. Positive result on restoring funtionality
115 €
Voir le product
France (Toutes les villes)
Superbe appareil photo reflex pour film 35mm, format 24x36 Olympus OM 1 equipé d'un dos 250 vues et ses magasins, d'un moteur OM Winder 2, d'un objectif Zuiko 50mm F:1,8 - Le boitier est dans un superbe état. Tout fonctionne parfaitement. Les vitesses et la cellule sont juste. Le dos 250 vues fonctionne lui aussi parfaitement. A noter que le bouchon pour l'engrenage du moteur est toujours là. Quelques poussières dans le viseur, ce qui ne gêne en rien son utilisation. Le moteur fonctionne lui aussi impeccablement, voir la vidéo Youtube: https://www.youtube.com/watch?v=a8D56C2SJwc - Objectif Zuiko 50mm f:1,8 en parfait état. Les lentilles sont parfaites, pas de rayures, pas de traces de nettoyage, pas de moisissure. Les bagues de mise au point et ouvertures sont fluide. Matériel non testé avec un film et vendu pour collection. Tout ce qui est dans ce set est visible sur les photos, aucun autre accessoire de disponible. PAS DE VENTE SEPAREE. Expédition pour la France: 35 euro AVEC assurance pour 1000 euro, Livraison par Mondial Relay SANS assurance: 12 euro Remise en main propre possible au marché aux Puces de Saint Ouen les lundi sur rendez vous. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Superb reflex camera for 35mm film, 24x36 format Olympus OM 1 equipped with a 250 frames back and its 2 magazines, a motor OM Winder 2, a lens Zuiko 50mm F:1,8 - The camera is in superb condition. Everything works perfectly. The speeds and the lightmeter are perfectly right. The 250-shot back also works perfectly. Note that the cap for the motor gear is still there. There's a little bit of dust in the viewfinder, but it doesn't affect its use in any way. The motor also works perfectly, see the Youtube video: https://www.youtube.com/watch?v=a8D56C2SJwc - Zuiko 50mm f:1.8 lens in perfect condition. The glass are perfect, no scratches, no traces of cleaning marks, no fungus. Focus and aperture rings are smooth. Material not tested with film and sold for collection. Everything in this set is shown in the photos, no other accessories available. NO SEPARATE SALE Shipping for China or U.S.A is 90 euro WITH 1000 euro insured with post office. Shipping for UE with post office is 42 euro WITH insurance for 1000 euro. Shipping cost with mondial relay for WITHOUT insurance for Belgium, Luxemburg, Nederland, Portugal, Spain, Germany, Italia and Austria: 22 euro En savoir plus
Voir le product

Petites annonces gratuites - acheter et vendre en France | CLASF - copyright ©2024 fr.clasf.com.