AMPLIFICATEUR MCINTOSH MC2600 À SAUSSET LES PINS

Caractéristiques:Form Stereo power amplifier Output(sinusoidal consecutive output) stereo: 600W+600W (2ohm, 4ohm, 8ohm) mono: 1,200W (1ohm, 2ohm, 4ohm, 8ohm, 16ohm) Output load impedance stereo: 2 ohm, 4ohm, 8ohm mono parallel: 1 ohm, 2ohm, 4ohm mono bridge: 4ohm, 8ohm, 16ohm Output frequency band 20Hz - 20kHz THD (20Hz - 20kHz) stereo: 0.005% or less (250mW-600W, both channel operation) mono: 0.005% or less (250mW-1200W) Cross modulation distortion(20Hz - 20kHz) stereo: 0.005% or less (It is about a single-sided channel at the less than peek 1,200W and both of channel operations time.) mono: 0.005% or less (a peek and less than 2,400W) Frequency band(at the time of 1W output) 20Hz-20kHz+0 -0.26 dB 10Hz-100kHz+0 -3 dB SN ratio 105dB or less (at the time of an Output power A Wei Ted) IHF dynamic head room 1.7dB Dumping factor 40 or more Input impedance 20kohms (unbalance) 40kohms (equilibrium) Input sensitivity 1.4V and 2.5V switching Power guarding It is less than THD2% to over-drive 14dB at 1kHz. An attached functionality The power meter of an illumination with a voltage regulator The meter window changeover switch of WATTS/HOLD Right-and-left independent gain volume Headphone monitor termination Speaker on/off switchpoint Power source AC 220v, 50Hz/60 Hz, 2A-24.5A and 15A, Underwriters Laboratories/CSA Dimensions Width 483x height 267x depth of 457mm (termination included) Handle path clearance 44mm Weight 59kg