ARDUINO NANO A000005 EN FRANCE

The A000005 is Version 3 of the Arduino Nanoboard, which is a small, breadboard-friendly board based on the ATmega328. It has similar functionality to the Arduino Duemilanove, but in a different package. It lacks only a DC power jack and is instead powered through the Mini-B USB connector. The Nano was designed and is being produced by Gravitech. Microcontroller Atmel ATmega328 Operating voltage is 5V Maximum supply voltage 6 to 20V Digital I/O pins 14 (of which 6 provide PWM output) DC current per I/O pin 40 mA DC current for 3.3V pin 50 mA Flash memory16KB of which 2KB is used by Boot loader SRAM 1KB, EEPROM 512bytes Clock speed 16MHz USB Connector type Mini B male Applications Communications & Networking Footnotes From January 2018 the Arduino Nano will ship with an upgraded bootloader. Arduino AVR Core 1.16.21 or later is required to program these new boards through the Arduino IDE. Instructions on how to perform this update are available here - https://www.arduino.cc/en/Guide/ArduinoNano Also Known As The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the  Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.   Microcontroller ATmega328 Architecture AVR Operating Voltage 5 V Flash Memory 32 KB of which 2 KB used by bootloader SRAM 2 KB Clock Speed 16 MHz Analog IN Pins 8 EEPROM 1 KB DC Current per I/O Pins 40 mA (I/O Pins) Input Voltage 7-12 V Digital I/O Pins 22 (6 of which are PWM) PWM Output 6 Power Consumption 19 mA PCB Size 18 x 45 mm Weight 7 g Product Code A000005