Bang & Olufsen Cd-tape Adaptator Passif - Allows the recording of a CD onto cassette tape using the 2 connected units - Add CD, MP3 player or a Bluetooth adapter to update your legacy system - The CD-TAPE adaptor enables you to connect both a compact disc player and a tape recorder to your amplifier at the same time even if the amplifier has only one TAPE input as on the beomaster 1900, 2300 2400 & 2400-2 etc. - Connect the long cable with a DIN plug to the TAPE input on the amplifier. Connect the short cable with a DIN plug (female) to the tape recorder cable. Plug the cable with phono plugs attached to the compact disc player into the sockets on the CD-TAPE adaptor: L to L (left channel) and R to R (right channel). - Set the switch marked "DIN-LINE" on the side of the CD-TAPE adaptor in the position required for the signal level of your tape recorder.Press in the push-button on the CD-TAPE adaptor when playing compact disc player. When playing the tape recorder, the button must be released. If you record a compact disc on the tape recorder, the button must also be pressed in. - The CD-TAPE adaptor is specially desgined to fit the Beogram CDX, a Bang & Olufsen, first generation compact disc player. This means it can be placed underneath the CDX to the right and thus be almost invisible, without impeding the operation of the push-button. - The CD-TAPE adaptor can of course be used with any compact disc player with RCA (Phono) connections OR A BLUETOOTH ADAPTOR and still allow a DIN-connected line level input Manufactured: 1986 - 1986 CD Tape Adaptor type 5006 TVA RECUPERABLE Réf: magetat
[…]Plus