CAMERA ASTRO ZWO ASI130MM (CAPTEUR 1,3 MP - 1/2 POUCE DIAGON À BOIS D'ARCY-YVELINES

Grande sensibilité (gros pixels monochromes) et capteur de taille moyenne pour pas cher ! Je vends une camera Astro ZWO ASI130MM (Capteur 1,3 Mp 1280x1024 - 1/2 pouce diagonal, taille de pixel 5,2 microns). Très bon état. Pas de traces d'usure apparentes. Peu utilisé. Complet avec boîte d'origine, câbles USB et ST4 + adaptateur pour connexion 1,25 pouces. Descriptif: https://astronomy-imaging-camera.com/portfolio/asi130mm Specs du capteur: 1/2-Inch Megapixel CMOS Digital Image Sensor MT9M001C12STM (Monochrome) Datasheet, Rev. M For the latest datasheet, please visit www.onsemi.com Features • Array Format (5:4): 1,280H x 1,024V (1,310,720 active  pixels). Total (incl. dark pixels): 1,312H x 1,048V  (1,374,976 pixels)  • Frame Rate: 30 fps progressive scan; programmable • Shutter: Electronic Rolling Shutter (ERS) • Window Size: SXGA; programmable to any smaller  format (VGA, QVGA, CIF, QCIF, etc.) • Programmable Controls: Gain, frame rate, frame size Applications • Digital still cameras • Digital video cameras • PC cameras General Description The ON Semiconductor MT9M001 is an SXGA-format  with a 1/2-inch CMOS active-pixel digital image sen- sor. The active imaging pixel array of 1,280H x 1,024V. It  incorporates sophisticated camera functions on-chip  such as windowing, column and row skip mode, and  snapshot mode. It is programmable through a simple  two-wire serial interface.  This megapixel CMOS image sensor features ON Semi- conductor’s breakthrough low-noise CMOS imaging  technology that achieves CCD image quality (based on  signal-to-noise ratio and low-light sensitivity) while  maintaining the inherent size, cost, and integration  advantages of CMOS. Table 1: Key Performance Parameters The sensor can be operated in its default mode or pro- grammed by the user for frame size, exposure, gain set- ting, and other parameters. The default mode outputs  an SXGA-size image at 30 frames per second (fps). An  on-chip analog-to-digital converter (ADC) provides 10  bits per pixel. FRAME_VALID and LINE_VALID signals  are output on dedicated pins, along with a pixel clock  that is synchronous with valid data. Parameter Value Optical format 1/2-inch (5:4) Active imager size 6.66 mm (H) x 5.32 mm (V) Active pixels 1,280 H x 1,024 V Pixel size 5.2 m x 5.2 m Shutter type Electronic rolling shutter (ERS) Maximum data rate/ master clock 48 MPS/48 MHz Frame rate SXGA (1280 x 1024) 30 fps progressive scan; programmable ADC resolution 10-bit, on-chip Responsivity 2.1 V/lux-sec Dynamic range 68.2 dB SNRMAX 45 dB Supply voltage 3.0 V3.6 V, 3.3 V nominal Power consumption 363 mW at 3.3 V (operating); 294 W (standby) Operating temperature 0°C to +70°C  Packaging 48-pin CLCC