DEKTEC DTE-3114 POE QUAD QAM MODULATOR TSOIP INPUT SYNTHETIZ À LA GENEVRAYE

DEKTEC DTE-3114  PoE POWERED by ETHERNET OR POWER SUPPLY(NOT INCLUDE) QUAD QAM MODULATOR  TSoIP INPUT SYNTHETIZED VHF/UHF OUTPUT USED IN VERY GOOD CONDITION - Standalone four-channel QAM modulator with TS-over-IP (TSoIP) inputs and directly synthesized VHF/UHF outputs - - Web and SNMP interface for setting parameters and observing status - - Unit can be powered via the Ethernet cable (Power over Ethernet) or through a DC power supply jack - - Supports IP de-encapsulation and 2D FEC decoding according to SMPTE 2022-1/2 - - Removal of IP jitter with programmable size of jitter-tolerance buffer - - LCD status display shows device identifier, bitrate, IP/MAC address and status - - Install up to 12 modules in 3U 19″ rack using the DekTec rack-mountable rail, or units can be mounted on a DIN rail directly on a wall Powering options - Through the Ethernet cable using: – IEEE 802.3af compatible PoE switch – PoE Midspan solution, e.g.3COM 3CNJPSE - With DTE-PWR1 power adapter (included)  DTE-3114 Limitations - Channels must be grouped: overall spectrum of the DTE-3114 cannot be wider than 32MHz - All channels must operate in the same mode and with the same symbol rate  - Not supported: – Scrambling of incoming Transport Streams – SPTS-to-MPTS multiplexing – VBR input streams  DTE-3114 Applications - Small-scale CATV networks - Cable-network simulator - QAM test-signal generator KEY ATTRIBUTES Main RF port:  Connector    75-Ω F Female Output level (total)  -32.. -9dBm Level accuracy  ±1dB Monitor port:  Connector  75-Ω F Female Output level (total)  -25.5±3dBm RF:  Range    32.. 1006MHz Channel spacing  5.. 8MHz Symbol rate   4.48.. 7.0MBd MER  43dB GigE port: Physical layer  IEEE 802.3af Connector    RJ-45 Transport: TP per IP  1.. 7 Encapsulation  UDP or RTP FEC   SMPTE 2022-1 Jitter tolerance range:   1.. 120 ms MODULATION QAM-A    EN 300 429 (DVB-C)