MPU CORROSION RÉPARATION KIT AVEC 5101 POUR BALLY STERN EN FRANCE

Ce kit est le même pour les cartes MPU Bally & Stern, mais avec une prise supplémentaire et les cartes 5101 pour les cartes Stern MPU-200. Contient les 37 pièces suivantes les plus fréquemment endommagées par la corrosion de la batterie. La valeur de ce kit ne se limite pas aux pièces, mais permet de les obtenir toutes en même temps à partir d'une source. Reportez-vous au dessin de Bally MPU pour connaître l'emplacement de ces composants: (photocopie joint avec le kit) U8 – Static RAM, 450nS (maximum), part type 5101 (Note -- Included with BALLY35-BA1-KIT only) 1ea – 22 pin IC Socket, pin type (for U8) C1 – Capacitor, 820pF, Axial Ceramic – part marking = 821 C2 – Capacitor, 820pF, Axial Ceramic – part marking = 821 C3 – Capacitor, 0.01uF, Axial Ceramic – part marking = 103 C5 – Capacitor, 4.7uF, Tantalum, Dipped – part marking = 475 C13 – Capacitor, 0.01uF, Axial Ceramic – part marking = 103 C80 – Capacitor, 0.01uF, Axial Ceramic – part marking = 103 CR5 – Diode, Switching, 1N4148 CR7 – Diode, Switching, 1N4148 CR8 – Light Emitting Diode, Green CR44 – Diode, Rectifier, 1N4004 R1 – Resistor, 8.2K ohm, 1⁄4 Watt, 5% (Gray, Red, Red, Gold) R2 – Resistor, 120K ohm, 1⁄4 Watt, 5% (Brown, Red, Yellow, Gold) R3 – Resistor, 8.2K ohm, 1⁄4 Watt, 5% (Gray, Red, Red, Gold) R11 – Resistor, 82 ohm, 2 Watt, 5% (Gray, Red, Black, Gold - or blue with value printed on it) R12 – Resistor, 270 ohm, 1⁄4 Watt, 5% (Red, Purple, Brown, Gold) R16 – Resistor, 2K ohm, 1⁄4 Watt, 5% (Red, Black, Red, Gold) –  For Bally and Stern MPU-100’s R16 – Resistor, 2.2K ohm, 1⁄4 Watt, 5% (Red, Red, Red, Gold) –  For Stern MPU-200’s R17 – Resistor, 150K ohm, 1⁄4 Watt, 5% (Brown, Green, Yellow, Gold) R24 – Resistor, 8.2K ohm, 1⁄4 Watt, 5% (Gray, Red, Red, Gold) R28 – Resistor, 8.2K ohm, 1⁄4 Watt, 5% (Gray, Red, Red, Gold) R29 – Resistor, 470 ohm, 1⁄2 Watt, 5% (Yellow, Purple, Brown, Gold) R107 – Resistor, 3.3K ohm, 1⁄4 Watt, 5% (Orange, Orange, Red, Gold) R112 – Resistor, 1K ohm, 1⁄4 Watt, 5% (Brown, Black, Red, Gold) R113 – Resistor, 2K ohm, 1⁄4 Watt, 5% (Red, Black, Red, Gold) –  For Bally and Stern MPU-100’s R113 – Resistor, 2.2K ohm, 1⁄4 Watt, 5% (Red, Red, Red, Gold) –  For Stern MPU-200’s R134 – Resistor, 4.7K ohm, 1⁄4 Watt, 5% (Yellow, Purple, Red, Gold) R140 – Resistor, 20K ohm, 1⁄4 Watt, 5% (Red, Black, Orange, Gold) Q1 – Transistor, 2N3904 or 2N4401 Q2 – Transistor, 2N3904 or 2N4401 Q5 – Transistor, 2N4403 or 2N3906 VR1 – Diode, Zener, 8.2V, Part Type 1N4738A (Alternate for 1N9598) U11 - ic socket  40 pin  U7 - ic  socket  24 pin  L1  et  L2  :  inductance   0,22 uh   (3,3 mm x 7 mm)