20khz connectors

Bon ETAT, tout est OK. 20Hz à 20kHz Connectors: Inputs: Stereo 1/4b'"' jack Outputs: Stereo 1/4b'"' jack Controls: Bypass On/Off Remote LIVRAISON RAPIDE ET SOIGNEE

Professional sound at its best.   The CD 3000 3000W Power Amplifier combines a linear power supply and a Class D output to deliver Crest power in a compact and cost-effective package. The CD 3000 is very versatile, whether powering nightclub systems or touring bands.   A traditional linear power supply is used in the CD Series. Because of the efficiency of the switching output stage, the transformer does not need to be big or heavy. This gives the CD Series an advantage in delivering huge power in a compact package. The efficiency of the output stage also gives the power supply the ability to handle heavy duty cycles without compromising sonic integrity.   Crest Audio's engineering has also maintained sonic quality while incorporating the advantages of a switching output stage. High-power Class-D topology is the key to its efficiency and low operating temperature. An additional advantage is its low power consumption.   Features     Dramatically reduced net weight     Linear power supply / Class D output stages     Very low current draw     Latest generation of high-speed, mosfet output devices     Cooled by variable-speed fan with back-to-front airflow     Inputs: balanced female XLR, 1/4" TRS combi jacks     Outputs: Speakon and five-way binding posts     Mode selector switch for stereo, parallel and bridged-mono operation     Ground-lift switch and rear panel circuit breaker     Recessed, stepped attenuators with removable knobs     16-gauge steel chassis, cast aluminum front panel     TourClass protection circuits     ACL (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when signal approaches the clipping threshold     IGM (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may over-stress output devices, allowing safe operation into nominal 2 Ohm speaker loads     AUTORAMP gradually increases gain to the attenuator level-settings when the amplifier is turned on, preventing abrupt turn-on levels     Other protection features include: short circuit, DC voltage, comprehensive thermal management, current in-rush turn-on/off transient and sub/ultrasonic input     Five-year warranty Specifications     Stereo Power 8 Ohms: 800 Watts     Stereo Power 4 Ohms: 1500 Watts     Stereo Power 2 Ohm: 1800 Watts     Bridged Power 8 Ohm: 3000 Watts     Maximum output voltage: 85V rms     Frequency response 1W @ 8 ohms: 20Hz—20khz, +/-1db     Power bw rated power @ 4 ohms, 1% THD+N: 20Hz—20khz, +/-1db     THD + N:     Imd; SMPTE/DIN 4:1 (60 Hz / 7 khz):     Damping factor: 400:1 @ 8 ohms (20 Hz to 100 Hz)     Input CMRR: >60db @ 1khz     Gain / input sensitivity @ 4 ohms: Selectable: x20, x40, or.775 V for full rated output power     Input impedance: >20kohms balanced, >10kohms unbalanced     Hum and noise: > -100db, A-weighted below rated power @ 4 ohms     Crosstalk: > -60db below max rated power (1khz)     Class: D     Power supply: Linear with toroid transformer     Circuit breaker rating (120V/230V): 20A /12A     Current draw (120VAC) 1/8 power, 4 ohms: 7.0A     1/3 power, 4 ohms: 14.0A     At idle: 1.5A     Thermal emissions 1/3 Power, 4 ohms BTU / hr: 1024     Cooling: Back to front via variable speed DC fan     Input connectors: balanced female XLR, 1/4" TRS, unbalanced 1/4" TS on Neutrik combo connectors     Output connectors: Five-way "touch-proof" binding posts and Neutrik Speakon connectors (which presents both outputs on the A Speakon for bi-amplified applications)     Controls: front panel: twin recessed stepped attenuators, power switch     Rear panel: signal ground-lift, mode select, gain select, circuit breaker     LED indicators: signal level (5 element bargraph), protect, active, ACL / IGM     Construction: 16-gauge steel chassis, cast aluminum front panel - optional handles available     Dimensions (W x H x D): 19" x 3.5" x 1

Bonjour, Nous vendons notre XTA DP224 550€ NET. Utilisé en studio puis à la maison il est en bon état et fonctionnel à 100%. Possibilité de facturation via notre structure, Livraison possible en France (+15€) et Europe (+25€) Testable sur place (Besançon) Annonce disponible sur reverb, audiofanzine, marketplace.   Hello, We sell our XTA DP224 550 € NET. Used in studio and then at home it is in good condition and 100% functional. Possibility of invoicing via our structure, Delivery to France (+ 15 €) and Europe (+ 25 €). Aviable on reverb, audiofanzine, marketplace.   Specifications : Inputs:   2 electronically balanced Impedance:  > 10k ohms. CMRR:  >65dB 50Hz - 10kHz. Outputs:  4  electronically balanced Source Imp:  Frequency Resp.:+ ½dB 20Hz-20kHz Dyn Range:>110dB 20Hz-20k unwtd Distortion: Maximum Delay: 650 mS  Min Step Size:  2.6  µS Input Gain:  +6dB to -40dB in 0.1dB steps Output Gain: +15dB to -40dB in 0.1dB steps and mute Parametric Equalisation : 8 per Input / 5 Sections per Output Filter Gain: +15dB to -30dB in 0.1dB steps.   Freq. Range: 20Hz - 20kHz, 1/36 octave steps. (368 positions) Filter Q / BW: 0.4 to 128 / 2.5 to 0.008 (Sections switched to  shelving response) Low frequency: 20Hz - 1kHz  High frequency: 1kHz - 20kHz Shelf gains:  ±15dB in 0.1dB steps.   High and Lowpass Filters Filters: 1 of each per output. Freq. Range  HPF: 10Hz - 16kHz 1/36 octave steps. Freq. Range LPF:  35Hz - 22kHz 1/36 octave steps. Responses:  Bessel/Butterworth 12-18-24dB/Oct. Linkwitz-Riley 24dB/Oct. Limiters Threshold: +22dBu to -10dBu Attack time: 0.3 to  90 milliseconds Release time: 2/4/8/16/32 x Attack time Display:2x20 character backlit LCD Input meter:  2 x 6 point, -24dB to digital  clip. Output meter:  6 x 6 point, -24dB to +4dB into limit. Connectors Inputs: 3  pin  female XLR Outputs: 3 pin male XLR. MIDI In: 5 pin DIN External: 9 pin DEE connector (RS232) RS485:3 pin  male XLR (out) 3 pin  male XLR (in) Power: 3 pin IEC Power:  60 to 250V  ±15% @ 50/60Hz. Consumption: Weight: 3.5kg. Net  (4.8kg. Shipping) Size: 1.75"(1U) x 19"  x 11.8"  (44 x 482 x 300mm) excluding connectors.

Kimber Kable AGDL Silver Digital Cable, 0.5 Meter. 0.5M cable in perfect cosmetic and working condition. Kimber Ultraplate RCA type connector for digital and analog connections (75 ohms up to 400 MHz). The brass sleeve connected to the minus contact provides optimum shielding. Contacts utilize pure passivated fine silver. Silver conductors and advanced design give AGDL the performance edge over other digital cables. Highly recommended Kimber AGDL braided digital cable features silver conductors in a unique coaxial design. AGDL earns a nod from Stereophile's "Recommended Components" listing, which reports that AGDL excels "in the retrieval of detail" and offers "extended and powerful bass." AGDL's advanced construction features proven tri-braid field geometry, Varistrand conductor design, Teflon dielectric, and Hyper-pure silver conductors for maximum signal transfer. The result is exceptionally accurate, detailed and dynamic performance. This premium S/PDIF cable is terminated with Ultraplate RCA-type connectors. Silver Yields Sterling Performance (Cp) parallel capacitance: 37.10 pF @ 20kHz (Cs) series capacitance: 37.0 pF @ 20kHz (Lp) parallel inductance: 1.90 µH @ 20kHz (Ls) series inductance: 1.05 µH @ 20kHz (Rdc) dc resistance: 0.119Ω (Xt) total reactance: 0.132Ω @ 20kHz Frequency response ±0.5db dc-10Mhz

Le MPX 1 est le processeur «multi-effets». Une technologie multiprocesseur FX combinée à un panneau avant interactif. Une complète connectique à l'arrière professionnelle - Détail des caractéristiques: Analog Audio Input XLR and 1/4" balanced (T/R/S)Input Level -2dBu to +20dBu, balanced; -14dBu to +8dBu, unbalanced Input Impedance 100k½, balanced;50k½, unbalanced Analog Audio Output XLR and 1/4"balanced (T/R/S) Output Level +18dBu Output Impedance 600½unbalanced Digital Audio Input Coaxial RCA Format 24-bit S/PDIF Sample Rate 44.1kHz Digital Audio Output Coaxial RCA Format 24-bit S/PDIF Sample Rate 44.1kHz Conversion 24-bit A/D;24-bit D/A Internal Audio DSP 20-bit;32-bit Frequency Response 20Hz - 20kHz ±1dB Crosstalk -60dB THD 0.01%, 20Hz - 20kHz Dynamic Range D/A:>95dB typical, 20Hz - 20kHz, unweighted A/D:>90dB typical, 20Hz - 20kHz, unweighted A/A:>95dB typical, 20Hz - 20kHz, unweighted MIDI Interface 7-pin DIN connector for MIDI IN and powered bidirectional remote; 5-pin DIN connectors for MIDI THRU and OUT Footswitch 1/4"T/R/S connector for bypass and tap Footpedal 1/4"T/R/S connector (10k½- 100k½impedance) Power Requirements 100 - 240 volts AC, 50 - 60Hz, 25 watts (3-pin IEC connector) Remote Power In 2.5 mm 9 volts AC (not included) Dimensions 19" W x 1.75" H (1U) x 9" D (483 x 45 x 289 mm), rack mount standard Weight 6.125 lbs.(2.8 kg) Operating Temperature 32¡to 104¡F (0¡to 40¡C) Maximum Humidity 95% without condensation

Focusrite Saffire Pro 14, Interface audionumérique FireWire - jamais utilisé.  CD d'installation fournie. 1 x câble Firewire -> Firewire fourni. Fiche technique   Fabricant:Focusrite Modèle:Saffire Pro 14 Série:Saffire Catégorie:Interfaces audionumériques FireWire Fiche créée le:11/08/2010 Microphone Inputs 1-2 Frequency Response: 20Hz - 20kHz +/- 0.2 dB Gain Range: +13dB to +60dB Maximum Headroom +8dBu THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter) Noise EIN: 124dB analogue to digital (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter) Input Impedance: 2k Ohm Line Inputs (Inputs 1-2) Frequency Response: 20Hz - 20kHz +/- 0.2dB Gain Range: -10dB to +36dB THD+N: 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter) Noise: -90dBu (22Hz/22kHz bandpass filter) Input Impedance: >10k Ohm Line Inputs 3-4 Frequency Response: 20Hz - 20kHz +/- 0.2 dB Gain Range: Switch-able between +16dBu or -10dBV for 0dBFS (balanced inputs) THD+N: 0.003% (measured at 1kHz with a 20Hz/22kHz bandpass filter) Noise: -100dBu (22Hz/22kHz bandpass filter) Input Impedance: >10k Ohm Instrument Inputs (Inputs 1 and 2) Frequency Response: 20Hz - 20kHz +/- 0.1dB Gain Range: +13dB to +60dB THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter) Noise: -87dBu (20Hz/22kHz bandpass filter) Analogue Audio Outputs (Outputs 1-4) 4 Electronically Balanced Outputs Maximum Output Level (0dBFS): +10dBu THD+N: 0.001% (0dBFS input, 20Hz/22kHz bandpass filter) Crosstalk (Channel Isolation) Any input to input: > 100dB Any output to output: > 100dB Any input to output: > 100dB DIGITAL PERFORMANCE A/D Dynamic Range > 109dB (A-weighted), all analogue inputs D/A Dynamic Range > 106dB (A-weighted), all analogue outputs Clock Sources: - Internal Clock - Sync to Word Clock on SPDIF Input (RCA) JetPLLTM PLL technology providing superb jitter reduction for class leading converter performance Clock jitter < 250 picoseconds Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz 8 input channels to computer: Analogue (4), SPDIF (2) and Loop-back (2) 6 physical output channels from computer: Analogue (4), SPDIF (2) 12 DAW output streams Assignable 18 input by 6 output mixer Weight and Dimensions 1.5kg / 3.3lbs 215mm (W) x 45mm (H) x 220mm (D) (8.5 x 1.8 x 8.7 inches) Connectivity Analogue Channel Inputs (Inputs 1-2) 2 Mic XLR Combo (channels 1-2) on front panel 2 Line 1⁄4” TRS (channels 3-4) on rear panel Automatic switching between Mic / Line (channels 1-2) Switching between Line / Instrument Inputs (channels 1-2) via Saffire MixControl Application Switching between +16dBu (low) and -10dBV (high) gain on inputs 3-4 via Saffire MixControl Application Digital Channel Inputs (Inputs 5-6) 44.1 - 96kHz Stereo S/PDIF input on RCA Analogue Audio Outputs (Outputs 1-4) 4 1⁄4” TRS Jacks Output Level control (analogue) for outputs 1 and 2 Stereo Headphones Mix 1 on 1⁄4” TRS (also routed to Outputs 3 & 4) with independent volume control Digital Channel Outputs (Outputs 5-6) 44.1 - 96kHz Stereo S/PDIF Output on RCA Other I/O 1 6-pin FireWire S400 socket 2 Standard 5-pin DIN MIDI connectors: In and Out DC Power Input Connector (for use with supplied universal input power supply) Front Panel Indicators 2 2 segment input meters, Sig (-18) and O/L (0dBFS) “LKD” Locked Indicator “FW” Host Connected Indicator “Power” Indicator Instrument input source selection LED for channels 1 and 2 Phantom Power (48V) switch and LED for inputs 1 and 2

DBX AFS 224 ANTI LARSEN Input 2 total Input Connectors Female XLR ad 1/4" TRS Input Type Electronically bal/unbal RF filtered Input Impedance Bal 40k ohm, unbal 20k ohm Max Input +20dBu CMRR 40dB, typically 55dB @ 1kHz Output 2 total Output Connectors Male XLR and 1/4" TRS Output Type Electronically bal/unbal, RF filtered Output Impedance Balanced 120 ohm, unbalanced 60 ohm Max Output +20dBu A/D Converter dbx Type IV conversion system A/D Dynamic Range 114dB, A-weighted, 112dB unweighted Type IV Dynamic Range 119dB, A-weighted, 22kHz; BW: 117dB, unweighted, 22kHz BW Sample Rate 48kHz D/A Dynamic Range 112dB, A-weighted, 110dB unweighed Dynamic Range 110dB, A-weighted, 107dB unweighted THD+Noise 0.002% typical at +4dBu, 1kHz, 0dB input gain Frequency Response 20Hz - 20kHz, +/-0.5dB Interchannel Crosstalk 80dB typical Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz Power Consumption 9 W Audio et hifi occasion à vendre à Courcouronnes (91080)

Denon DN-T625 Le DN-T625 est une combinaison professionnelle de lecteur CD et de lecteur / enregistreur de cassette logé dans un châssis rackable 3U. Les caractéristiques comprennent le contrôle série RS-232C, la lecture de CD-RW, la mémoire de choc, la réduction du bruit Dolby C, le texte CD et la sortie XLR mono à niveau partagé pour l'adaptation du niveau d'entrée aux tables de mixage. Les fonctions du lecteur CD incluent une hauteur variable de ± 12 % de la vitesse de lecture, le mode de répétition A-B, le mode de lecture simple / continue et une fonction de retour arrière. Un bouton de commande rotatif permet un accès rapide aux pistes. La sortie numérique SPDIF est disponible, ainsi que la synchronisation et le contrôle en cascade pour une utilisation avec plusieurs unités DN-T625. L’ajustement numérique des servos pour le lecteur de CD de l'unité a été automatisé de sorte que le réglage optimal soit toujours obtenu pour le type de CD en cours de lecture, compensant les changements survenant dans le capteur au fil des années d'utilisation. Conçu pour les églises, les écoles, les restaurants et une variété d'autres applications de source musicale, le DN-T625 permet aux utilisateurs de créer leurs propres enregistrements d'un disque à une cassette ou de mélanger des sons provenant des deux sources. Lorsqu’il est combiné avec une table de mixage, les sons d'un CD et d'un microphone peuvent être mixés et enregistrés sur la platine cassette. Cette option est parfaite pour la musique de fond personnalisée ou les annonces pré-enregistrées. - Lecteur CD-R / RW professionnel unique avec lecteur / enregistreur de cassettes - Lecteur CD Démarrage instantané et repérage automatique (présélectionnable) - Jeu de mise sous tension Denon DN-T625 Specs Type    Combination CD player and cassette player/recorder Compatible Discs    Red Book CD and CD-R/RW Supported Bit/Sample Rates    16-bit/44.1kHz D to A Converters    8x oversampling digital filter Frequency Response    20Hz to 20kHz (CD section) Dynamic Range    Not specified by manufacturer Signal-to-Noise Ratio    98dB A-weighted (CD section)    70dB, Dolby C on (Cassette Deck) Total Harmonic Distortion (THD)    0.009% or less (CD section) Output Connectors    2 x XLR CD out balanced analog    2 x XLR tape/mix out balanced analog    2 x RCA phono CD out unbalanced analog    2 x RCA phono tape/mix out unbalanced analog    1 x RCA S/PDIF coaxial digital Headphone Connector    Yes Remote Control    Optional (RC-620 wired remote control) RAM Buffer    Yes Dimensions (HxLxP)    13.33 cm x 48.26 cm x 26.21 cm Weight    4kg72 Specialties    Sync and Cascade connectors for use with multiple     DN-T625 units Number of Heads    2 Motor    2 x DC servo Wow and Flutter    0.06% WRMS Speed Adjustment    ±12% or better with center click Lining    2 x XLR balanced analog    2 x RCA phono unbalanced analog FEATURES CD - 99-track programming and random play - ±12 % Variable pitch playback - CD-R/RW playback - Back cue function, single/continuous playback function - CD TEXT - MP3 playback (DN-T645 only) - Instant start playback DECK - Dolby B/C noise reduction system - Dolby HX-Pro headroom extension system (DN-T645 only) - Auto tape selector - Speed control of approximately ±12 % for tape deck - Music search system - Quick auto reverse GENERAL - Serial control port (9P D-sub) - Copy from CD to tape or use independently - Headphones jack with volume control - Relay playback - Cascade playback - Power on playback - XLR input/output SPECS Compatible Discs - Red Book CD and CD-R/RW Supported Bit/Sample Rates - 16-bit/44.1kHz D to

Transducer system 3-way vented: 300mm Harbeth bass unit; 200mm RADIAL2™ mid; 25mm ferro-cooled soft dome tweeter Frequency response 35Hz - 20kHz ±3dB free-space, grille on, smooth off-axis response Impedance 6-8 ohms, easy to drive Sensitivity 86dB/1W/1m Amplifier suggestion Works with a wide range of amplifiers, suggested from 35W/channel. Power handling 650W programme Connectors Two 4mm gold-plated binding posts for wires or plugs Dimensions 750 x 432 x 388mm (+12mm for grille and binding posts) Space needs Ideally free-space away from walls. Stands Optimally to bring ears level with tweeters. (Tweeter: 660mm up from cabinet base) Weight 38kg each Packing Single speaker per protective carton

Amplificateur - Tuner Radiola 603 / Platine K7 Radiola N5430 (Philips AH 603 / Philips 603 / Philips N5430) - tres rare ensemble ampli/tuner et lecteur K7.  Specifications Radiola 603 Tuning range: FM, MW, LW Power output: 30 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Input sensitivity: 2.5mV (MM), 150mV (DIN), 150mV (line) Output: 120mV (line), 0.25mV (DIN) Speaker load impedance: 8Ω (minimum) Specifications Radiola N5430 - Head Configuration - 2 Head Desiǥn - 4 Track / 2 Channel - Noise Reduction - Dolby-B Noise Reduction - MPX Filter - Connectivity - 2 Mono Microphone Inputs - DIN Input/Output Connector - Headphones - RCA Input/Output Connectors - Operation - Mechanical Transport Control - Memory Stop - Cue / Review - Preamplifier - Output-Level Control - Individual Input Level Controls - Display - 3-Digıt Mechanical Counter - Analog Needle Meters - Transport - Sìngle Capsŧan Transport - Belt Drive (Capsŧan) - Mechanical Tape Loading - Auto Shutoff - Indicators - Peak Indicator - Record - Cassette Back Lighting - Dolby B - Exterior - Front Loading - Orientation Right - Black Finish - General - Stereo - Tape - Chrome Tape Capabılity - Ferro-Chrome Tape Capabılity - Normal Tape Capabılity - Manual Tape Type Selection - Speed - 1⅞ ips - 4.76 cm/s En très bon état marche et esthétique.

Enceintes / Speakers Harbeth P3ESR Special Edition - Used / Occasion - RARE White color ! > Pair of speakers really rare in White. Amazing sound from Harbeth. This is the special edition with enhanced cables in it. They look like new however, when you look really closely you will see some little scratches of the painting. I didn't try to delicately paint it back in white... but it seams feasible... - On Left speaker:    - 1 small scratch on the face side / top right corner -> almost unnoticeable if you use it with grilles.    - 1 small scratch on the left side / top border, in the middle    - 1 small impact on the right side / top border -> almost unnoticeable because stayed in white. - On Right speaker:    - 1 small scratch on the left side / top left corner >> See picture for all those. I took picture really closely... when you look at it 1 meter away from the speaker you won't notice it... Free shipping in Europe ! Feel free to ask any questions. Specifications: Transducer system 110mm Harbeth RADIAL2™ bass/midrange; 19mm ferro-cooled tweeter Frequency response 75Hz - 20kHz ±-3dB free-space, grille on, smooth off-axis response Impedance 6 ohms, easy to drive. Sensitivity 83.5dB/1W/1m Amplifier suggestion Works with a wide range of amplifiers, suggested from 15W/channel. Power handling 50W Connectors Two 4mm gold-plated binding posts for wires or plugs Dimensions 306 x 190 x 184 mm (+12mm for grille and binding posts) Finish White Space needs Ideally > 0.30m from rear wall Stands Optimally to bring ears level with tweeters. (Tweeter: 230mm up from cabinet base) Weight 6.1kg each (without packing)

Paire d'enceintes passives Yamaha S12. Bon état général, quelques traces d'usage. Bon rendu sonore malgré la taille, avec des basses très correctes Principales caractéristiques: Les boîtiers à blindage magnétique permettent une utilisation à proximité des téléviseurs ou des écrans d'ordinateur Large gamme d'options de montage (verticale ou horizontale) Les boîtiers moulés robustes minimisent la résonance et améliorent la durabilité Convient pour la diffusion en petite salle ou comme moniteur de poste de travail Caractéristiques: Réponse en fréquence: 65 Hz - 20 kHz Capacité de puissance: programme 80 Watts Impédance nominale: 8 Ohms SPL: 87 dB (1 Watt, 1 mètre, sur l'axe) Fréquence de croisement: 7 kHz Connecteurs: bornes poussoirs ou jack b'"'Dimensions: 240(L) x 155(H) x 158(P)Poids: 2,3 kg (5 lb, 1 oz) Montage: filetages taraudés sur la base et l'extrémité pour un montage optionnel sur support ou support mural. Acheteur hors de France, me contacter pour les frais de ports. Yamaha S12 mini loudspeaker Good general condition, some traces of use.Good sound reproduction despite the size, with very decent bass Key Features: Magnetically shielded enclosures allow use in close proximity to TV sets or computer monitors Wide range of mounting options (verticale ou horizontale) Rugged molded enclosures minimise resonance and enhance durability Suitable as Infill, background music (BGM) or workstation monitor Specifications: Frequency Response: 65Hz - 20kHz Power capacity: 80 Watts program Nominal impedance: 8 Ohms SPL: 87dB (1 Watt, 1 metre, on axis) Crossover frequency: 7kHz Connectors: push terminals or �b'"' jack Dimensions: 240(W) x 155(H) x 158(D) Weight: 2.3kg (5lbs, 1oz) Mounting: tapped threads on base and end for optional stand or wall bracket mounting. En savoir plus