All specs

M-audio DMP3 - Préamplificateur micro/instrument et boîte de direct à deux canaux Très bon état esthétique et de fonctionnement. Livré dans boîte d'origine avec alimentation électrique et manuel. Emballage soigné. Préamplificateur micro/instrument et boîte de direct à deux canaux. Basée sur la technologie de préampli M-Audio acclamée par la presse internationale, le DMP3, avec son exceptionnelle bande passante de 20Hz à 100kHz, est l'appareil idéal pour les enregistrements à 96 kHz. Avec le DMP3, vous disposez d'une plage dynamique extraordinaire pour capturer toutes les nuances de votre musique et vous bénéficiez d'un gain incroyable de 66dB. Enfin, ses VU-mètres classiques ne vous donneront qu'un aperçu de la qualité du son offert par le DMP3. Que vous l'utilisiez en concert ou en studio, le préamplificateur de micro/instrument à deux canaux DMP3 fait partie de ces appareils qui sont indispensables à la définition de votre son. Caractéristiques du M-Audio DMP3 ▪ 2-channel preamp with XLR microphone inputs and 1/4” instrument inputs accommodates any type of audio signal (alim 48 volts) ▪ balanced outputs on TRS jacks deliver hum-free professional audio ▪ low harmonic distortion (THD+N:.0005% @ 20Hz-20kHz) for ultra-clean sound ▪ exceptional dynamic range to capture all the nuances of your music ▪ 20Hz to 80kHz frequency response (+/- 0.5dB) ideal for high-resolution recording ▪ high and low gain range controls offer up to 67dB of gain ▪ clip LED for visual feedback of detrimental levels ▪ low-cut filters remove unwanted rumble and hum ▪ phantom power to accommodate all types of microphones ▪ phase reverse switch on each channel ensures optimal recordings Spécifications ▪ All specs taken at minimum gain unless otherwise stated: ▪ frequency response: 20Hz – 80kHz, +/-0.5dB @ max gain ▪ SNR: -120dB, A-weighted, 20Hz to 20kHz ▪ THD+N: 0.00035% (-109dB), 20Hz to 20kHz, @ +13.6dBu input ▪ max input: +14.6dBu ▪ max output: +27.5dBu ▪ input impedance: 3k Ohms balanced ▪ EIN: -128dBm @ 600 Ohms, max gain ▪ gain range: 13.5dB to 46.5dB, low gain range 39.5dB to 72.5dB, high gain range ▪ low-cut filter: -3dB @ 72Hz (18dB/Octave)

Leica V-Lux 3 in very good condition. État : Occasion All specs & instructions for use available on manualslib.com. A versatile camera with large sensor and built in telephoto lens, and settings that go from full auto to full manual, with all kinds of features in between; babies, dogs, one that makes your wife look younger with bigger tits & so on. Comes with lens cap, lens hood, strap, battery charger with two batteries, usb cable an an 8G SD card. Takes great photos. Has a little red dot. Paypal only please Postage 42 euro worldwide.

Leica V-Lux 3 in very good condition. État: Occasion All specs & instructions for use available on manualslib.com. A versatile camera with large sensor and built in telephoto lens, and settings that go from full auto to full manual, with all kinds of features in between; babies, dogs, & so on. Comes with lens cap, lens hood, strap, battery charger with two batteries, usb cable an an 8G SD card. Takes great photos. Paypal only please Postage 42 euro worldwide.

Kurzweil PC4 Workstation Black 88 Stage Piano Digital Synthesizer FM, Vast, Sub. Used, bought in 2021, perfect condition, everything working perfectly. Sold with ac adapter and sustain pedal. It does almost everything piano, rhodes, wurlitzer, kb3 hammond sound Deep and diverse synthesis Thousands of sounds 2go of additional memory for user samples All specs at https://kurzweil.com/pc4/#specs Better in person, though I can deliver within a 200km range, so Montpellier, Valence, Lyon, Marseille. On only know of Cocolis.fr for large delivery, all the other doesn't accept more than 100 or 120cm. Otherwise you can propose the company you like at you expense. En savoir plus

SPECIAL HEALTH NOTICE:   All Items & packaging are from long-term, isolated storage.   Despatch is “No-contact”.   Please read details below. AVIS DE SANTÉ SPÉCIAL: Tous les articles et emballages proviennent d'un stockage isolé à long terme. L'expédition est «sans contact». Veuillez lire les détails ci-dessous, s.v.p. Traduction français en dessous. S.v.p.excuser des fautes linguistiques. Now retired and increasingly needing autofocus, I’m selling off some of my older collection. This is a 105 – 210 C zoom for Mamiya 645 series medium-format cameras, in excellent condition. The Sekor lenses were noted for their high sharpness and contrast. Tested with film before sale: negative clean, sharp, good contrast. Cosmetics: Very light signs of use. A small black screw retouch mark on an internal metal retaining ring (see front photos) comes from an internal clean some while ago and does not affect performance in any way (tested with film as above). Mechanical & Electonic: Tested before advertising. All functions ‘as good as new’. Zoom and focus rings are smooth, firm, precise. Auto / manual diapraghm action crisp. Optical: Glass clean and clear; no fungus or haze. Few internal dust specs, no effect on optical performance, which is ‘as good as new’. Front filter always fitted. Included in Sale: Lens + Mamiya front and rear caps + Sky filter. Integral sliding hood. Please see my separate ads for choice of 1000S body … Spare film insert with box... Extension tube Will combine & discount postage for multiple purchases together … please ask for revised invoice before paying. If you have any queries, please ask before bidding/purchase. Payment: Paypal / card via Paypal only, please, for mutual security, within 48 hours of purchase.. Despatch: SPECIAL ARRANGEMENTS DURING HEALTH RESTRICTIONS - PLEASE READ CAREFULLY. (1) Items and all packaging material stored long-term in rural, isolated house. Item(s) will be carefully packed for tracked postage. (2)  Postage is via – UPS "no-contact" collection service from house box. Parcel prepared within 48 hours, but can take up to 3 days for collection. I will communicate with buyer at all stages on progress.  Delivery will often be longer than normal. (3)  Please ensure you can receive parcels from France before bidding/buying.  I try to restrict sale to areas reported as still receiving post from France, but cannot guarantee it since rules change almost daily somewhere!  Again, please message with me first if unsure.  (4)   See “Postage” tab for costs to countries in the E.U. including full transit insurance. At present, I do not sell outside the EU. Returns:           Please check goods carefully on receipt. You are covered by the Money-back Guarantee plus insured postage. If you find on receipt any damage or other non-conformity with description, please retain all original packing plus any other relevant evidence, and notify me via within 7 days to enable timely insurance notification … or to initiate other rectification if appropriate. Thank you for your interest Français: Retraité et dépendant de plus en plus à la mise au point automatique, je vends une partie de ma collection « mise au point manuelle ». Ici un ojectif zoom 105 – 210 C pour caméras Mamiya 645 moyen format, en excellent état. Les objectifs Sekor étaient réputés pour leur forte netteté et contraste. Testé avec un film avant la vente: négatiif clair, bon piqué, bon contraste. Cosmétiques: Traces d'utilisation minimes. Une petite marque de retouche de vis noire sur une bague de retenue métallique interne (voir photos avant) provient d'un nettoyage interne il y a quelque temps et n'affecte en rien les performances (testé avec un film - voir ci-dessus). Mécanique & Electronique: Testée avant la publicité. Fonctionne ‘aussi bien que neuf’. Bagues zoom et mise-au-point lisses, fermes, précis. Les actions

Here is a 2002 Gibson Les Paul Standard Mahogany 3 Pickup Seymour Duncan Limited Edition. Try to find another one of these! This 2002 Gibson Les Paul Standard Mahogany is in exceptional condition and plays great. It features all mahogany construction including the carved top, mimicking the tone wood platform of a 1950s Les Paul Custom. Factory trio of Seymour Duncan Distortion humbuckers. That guitar sports a one-piece mahogany body. There are a few playing marks (at the back, hard to shoot), nothing to worry for a 19 years old guitar. It's lightweight (4,199 kg) and comes with its Gibson original hardshell case with all working latches (including the code lock). I have just got my hands on a cool '91 Black Beauty with all mahogany body so this all mahogany Standard has to go. Please note that the tunomatic bridge has been upgraded to a Schaller (the original tunomatic is not included). You can easily revert to original specs if needed. Video demo here: youtu.be/J8Xbj46kcHU

Enregistreur 24 pistes Alesis HD24 multitrack recorder Parfait état 80 giga DD. Overview HD24 is the world's first 24-track hard disk recorder designed to fit into any ADAT environment and match ADAT's legendary performance and affordability. HD24 is built exclusively for the purpose of recording music instead of data, resulting in remarkable stability and performance. HD24 enables engineers to record up to 24 tracks of high-resolution 24-bit recording at 44.1 and 48 kHz sample rates. Two hot-swappable media bays provide convenient access to recording drives and allow data backup in minutes. You can edit tracks internally or easily transfer to computer via an Ethernet connection. HD24 features ADAT Optical and ADAT Sync, enabling it to work efficiently with existing systems. It offers the same exceptional user-friendly interface ADAT users have come to expect. HD24 can be upgraded to HR24XR with the EC2 module. This user-installable option replaces the A/D and D/A converters with the renowned AKM converters used in the acclaimed MasterLink. EC2 improves performance at all sample rates and also expands analog and digital-input compatibility to include 88.2 and 96 kHz sample resolutions. HR24 packs 24 channels of digital audio I/O into a single-unit recorder that easily fits into any environment. FEATURES - 24-track, 24-bit digital audio recording (12 tracks at 96kHz with EC2 optional updgrade) - 24 analog inputs (1/4" TRS) - 24 analog outputs (1/4" TRS) - 24-channel ADAT Optical I/O - Dual recording bays utilize standard, low-cost, removable IDE computer drives - Instant random access to audio using ADAT/FST™ (File Streaming Technology). - Internal editing capabilities include cut, copy, paste, and track-move with undo. - Multiple units can be synchronized to create a larger system - Easily integrated into an existing ADAT system - Ethernet port enables computer connection - MIDI I/O, MTC out - ADAT Sync in/out - Word Clock in SPECS MEDIA - Caddy 1: 260GB HD - Caddy 2: 80GB HD - Caddies can be fitted with IDE/EIDE/ATA drive at 5,400/7,200/10,000 RPM up to 2TB TRACK COUNT - 24 tracks at 24-bit, 44.1 or 48 - 12 tracks at 88.2 or 96 kHz with optional EC2 upgrade CONNECTIONS - Analog: 24 24-bit inputs, 24 24-bit outputs (1/4" TRS, +4dBu) - Digital: 24-channel I/O via 3 ADAT Optical inputs and 3 ADAT Optical outputs - Other: MIDI in/out. Alesis Sync in/out (DB-9). Word Clock input (BNC, 75). Footswitch jack for punch in/out (1/4"). LRC input for - traditional wired remote (1/4"). 10 Base-T Ethernet (RJ-45) AUDIO SPECS - Frequency response: 20Hz–20kHz +0/–1dB - Dynamic range: 103dB A/D, >103dB D/A (A-weighted) - Distortion: - Pitch control: +100 cents/–200 cents, min-max 30–50kHz (30–100kHz with version 2.0) POWER & DIMENSIONS. - Power: 90-230V AC, 60W - Dimensions (H x W x D): 5.09" x 19" x 17" (127mm x 483mm x 432mm), 3U rackmount - Weight: 20lbs (9.07kg)

Zoom Nikon AF Nikkor 35-70mm 1:2.8 + Zoom Nikon AF Nikkor 28-85mm 1:3.5-4.5 The Zoom Nikon AF Nikkor 35-70mm 1:2.8 is in good condition, AF works precisely and smooth. The lenses are clear without fog, fungus or scratches. A little bit of dust (normal for the age of this lens). The only problem with this Zoom is the push and back zoom, who blocks around 60mm - so you have a zoom like 35-60mm.(he don't go until 70mm). I really don't know why (I already got like that). Otherwise, this zoom provides very good quality pictures. One of the best of this generation. Comes with Hoya UV filter and both caps. AF Nikkor 35-70mm 1:2.8 specs The Zoom Nikon AF Nikkor 28-85mm 1:3.5-4.5 is in poor condition but works. The lenses are clear without fog or fungus. The focus works normally from 50mm to 85mm, but from 28mm to 50mm just in closest objects, even in manual. Macro works perfectly. The front element has some scratches, nothing really big, but they are there. Some dust too. Otherwise, this zoom provides very good quality pictures. Comes with Promaster UV filter and both caps. AF Nikkor 28-85mm 1:3.5-4.5  specs Both lenses work with Nikon AF-801/F-801s, F5, F-100, D2x, D3, D4, D800 and many other (Digital and Film cameras) Nikon cameras without built-in auto-focus motor they will work just in manual focus. Both lenses work with Nikon AF-801/F-801s, F5, F-100, D2x, D3, D4, D800 and many other (Digital and Film cameras) Nikon cameras without built-in auto-focus motor they will work just in manual focus. Look to my auctions. I have a lot of stuff to sell:: My auctions I group all items in one shipping. Ask for rate if you buy many of my items. Shipping to Germany, Belgique, Luxembourg, Netherlands, UK, España, Italia, Portugal and Austria is 10,42€. Ukraine, Maghreb and Norway, shipping is 24,35€.

Kurzweil Operating System 3.87C  (Calvin) update kit for K2000 and K2000R  Version 3.87 is the latest and the Best Operating System version for K2000 series synthesizers.   You will receive: - two brand new EPROMS - (K2000 Eng HI  and K2000 Eng LO), corresponding to the Operating System version 3.87 for K2000 K2000R (Calvin)  - integrated circuits extractor - phone or email support  Upgrading your K2000, K2000VP, or K2vx There are 2 different versions of the engine board and operating system - Calvin and Janis. If there is a "J" after the version number on the display on boot time, than you have a Janis unit, if there is no letter after the version number, you have a Calvin unit.                                                      Make sure to buy the right EPROM update kit corresponding to your board (Calvin or Janis) !!! Please note: If your K2000 system  directly from a version earlier than 2.0 (like 1.3 version) of the Kurzweil Operating System requires the additional purchase of new Setup EPROMs, which are NOT included with this operating system update kit but available on our shop.  K2000 Series - v3.87 Operating System New features and enhancements added when upgrading from version 3.54 - SCSI Speed Improvements. Now loads and saves twice as fast as previous versions. - Export to standard MIDI Type 1. Now the software can import and export both Type 0 and Type 1 MIDI files. - ISO 9660 format support. Adds ISO 9660 format support for CD's. This allows you to read CD's in the standard format. Previously we required an "image" of the hard disk format. - Supports looped WAV files, both import and export. Also correctly handles tuning of WAV and AIFF files. Saving a WAV file will now export the loop info, if any. Importing a looped WAV file will now get the loop data, if any. The software only handles one loop per sample, so the first loop found in a WAV file is used. - Now reads 2500 programs. Previously the 2000 would ignore programs containing 2500 specific parameters. Now it translates them, stripping out any KDFX or other 2500 parameters. - Improved object save and delete times. - Improved sample delete times.   New features and enhancements added when upgrading from version 3.01 or 3.18 All of the above, plus: - Eight 32-layer "drum" channels are now available. (PRAM option required). - A new option has been added for the sustain pedal (Program editor - LAYER page). When you select "On2," the sustain pedal will not catch the release of a note that is still sounding when the sustain message is received; this can be very useful in a program that uses amplitude envelopes with a long release time. - MIDI type 1 files can now be imported. - Verify option double-checks the data integrity of all your backup, copy, and save operations. - Info soft button on the Utilities page in Disk mode displays information about your disk drive(s). - Copy function now allows selection of multiple files. - You can now format multiple floppies without having to return to the initial Format command. - The K2000's SCSI subsystem has been enhanced to accept a greater variety of devices. In addition, the K2000 now supports disk drives of up to 2 Gigabytes (2048 Meg). V3.54 will work with drives larger than 2G but only the first 2 G will be utilized. (Drives larger than 1 gig will work externally, but are likely to draw too much power to be used internally. Please check our Hard Drive Compatibility List for power consumption specs. - Previous to v3.54, for the Backup and Copy functions, the combined size of both drives had to be under 1 gig unless PRAM was installed. This limitation no longer exists. - Compatibility with the PC Exchange program has been improved.   New features and enhancements added when upgrading from version 1 or 2 All of the above, plus: Version 3 operating system software for the K2000 offers majo

Nikon AF Nikkor 50mm 1:1.8 (MK I) This Nikkor standard lens is great condition, AF works precisely and smoth. Lenses clear, no scratches, no fungus, no fog, no dust. No problem at all. This zoom provides very good quality pictures. This is a bargain for the quality you will get with this lens. The AF is almost fast than the D version. Best quality cost relation of all standard Nikon lenses (standard in the full frame digital cameras or 24x36mm analog cameras).  Metal hood and Schneider push-on front cap (very practical - much better than original hood and frontal cap). With Nikon rear cap. Works with Nikon AF-801/F-801s, F5, F-100, D2x, D3, D4, D800 Etc. Nikon cameras without built-in auto-focus motor, just in manual focus. AF Nikkor 50mm 1:1.8 specs (01) Look to my auctions. I have a lot of stuff to sell, Sunpak TTL flashes, Nikon cameras, Nikkor lenses and many things: My auctions I group all items in one shipping. Ask for rate if you buy many of my items. Shipping to Germany, Belgique, Luxembourg, Netherlands, UK, España, Italia, Portugal and Austria is 9,33€. Ukraine, Maghreb and Norway, shipping is 22,25€.

Objectif Tele Fixe MAKINON 135mm f/2,8 M42 MF + HOUSSE - CANON/NIKON/PENTAX Description: Belle optique de l'époque des reflex argentiques à mise au point manuelle. Téléobjectif fixe doté d'une ouverture maximale de f/2,8. Il s'agit d'un modèle de très bonne qualité, il est construit comme un tank.  Compatibilité: L'objectif est à mise au point manuelle. La monture de l'objectif correspond au format M42 et pourra être utilisé sur les boitiers à vis ou bien avec un adaptateur M42 sur tous les boitiers actuels pour lesquels une telle bague est disponible (non incluse dans cette vente mais facilement trouvable) Etat optique: Propre, sans rayures ni champignons. Quelques micro-grains de poussière à l'intérieur n'auront absolument aucun effet optique négatif. Etat mécanique: Fluide. Diaphragme en très bon état. Etat esthétique: Très bon état général, avec des traces sans importance. Consultez les photos ci-dessous pour plus de détails. Livré avec: deux bouchons, housse de transport d'origine.  Je vous invite à consulter mes autres ventes Description: This is a nice manual telephoto prime lens with a maximum aperture speed f 1:2,8. It is built like a tank and produces high quality pictures.  Compatibility: The lens will be directly compatible with analog M42 cameras and with all brands that have M42 adaptor rings available (not included in this sale but available on this platform). Optical condition: Optics are clean, without scratches or mushrooms. There some specs of dust inside but this will not affect optical performances at all. Mecanical condition: Fully working mecanics. Smooth movement of all rings. Aesthetical condition: Very good used condition with some minor marks. Please refer to pictures hereafter to have a better idea on the general shape of the lens. Lot includes: both caps, original carrying case  _gsrx_vers_419 (GS 6.0.7 (419))  _gsrx_vers_827 (GS 7.0.13 (827))

Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303. As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds, without diluting the essential TB-303 character. MODS INCLUDE: VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob. Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods. VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob. VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff cont

——————————————— Produced like new in its original box. All these accessories Some slight traces of use ——————————————— Ifootage Shark Slider S1 Bundle. Location or studio, modular slider, delivering super smooth camera movement using iFootage's original flywheel. Precision engineered, lightweight and portable, belt driven slider can be rapidly and toollessly deployed where-ever you go. Superior design and construction, this slider is built to last! WHAT YOU GET: 2 x Pairs of shark slider track section 2 x Slider belt 1 x Original flywheel 1 x Camera carriage 1 x Carry case TECH SPECS: Materials: Carbon fiber and anodised aluminium (SUS304) Weight: 3.8kg Tube diameter: 22mm Max length: 1350mm Effective length: 1200mm Max load: 5kg PRODUCT FEATURES: Lightweight, compact, portable and functions perfectly at any angle Modular design - extends up to 1800mm using the included additional tracks Seamless track extension Fast and easy tool less deployment High quality engineering and materials Belt and original flywheel combination ensures totally smooth, silent camera movement Suitable for all locations and weather conditions

Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303.  As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds,  without diluting the essential TB-303 character.  MODS INCLUDE:  VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob.  Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods.  VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob.  VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff con

SUPERB, RARE Voigt set that includes: - A Bessamatic with very nice cosmetics and in working order: shutter fires at all speeds including low ones that "sound" correctly, light meter is lively to light exposure but setting the right exposure is no longer possible (includes the incident light cover that is missing most of the time), viewfinder is clear with some light specs of dust.  - A skopar 2,8/50 and Skoparex 3,4/35 is overall great conditions with no fungus, no haze, no scratch and easy focusing. A Super-Dynarex 4/135 is also part of this auction, but its diaphragm does not seem to work anymore although it has clean lenses and very nice cosmetics as well. A wep kinotelex 2x converter is the last lens of this set, in extremely good conditions in every regards as well. This set comes in a hard to find original Voigtlander outfit leather case in VGC, which has inside 5 Voigt lenses (portrait, UV, Skylight, yellow and orange - each in VGC), a Voigt lens hood (VGC) and 5 lens caps, a Voigt adapter. The instructions notice and a Bessamatic book, in VGC, will be joined as well. Do not miss this uncommon set of such a vintage classic camera that comes complete in VGC with all its accessories !!! Due to heavy weight (+2,5kg), shipping costs are 25 euros for EU countries, and 55 for rest of world.

Ne l'utilisant pas assez, je vends mon Fiio M11 Pro acheté chez Son-Vidéo en Février 2020 (garantie Février 2022, facture fournie). Il est comme neuf, les seules traces d'utilisation sont mes empreintes. Il est livré dans sa boite d'origine avec un cable USB-C et un cable RCA. ---- I'm selling my Fiio M11 Pro as I'm not using it enough. I bought it at Son-Video in Februar 2020 (warranty until February 2022, invoice provided). It is as new, only fingerprints will show it has been used. Sold in its box with cables. Specs: Système d'exploitation: Android 7.0 Interface: mode Android/Mode Pure Contrôle gestuel CPU: Exynos 7872 (14 nm) Nombre de coeurs du CPU: 6 Fréquence du CPU: 2 GHz (A73 x 2), 1,6 GHz (A53 x 4) DAC: AK4497EQ x 2 Technologie d'amplification THX Compatible MQA Mode All to DSD Sorties casques symétriques (mini-jack 2,5 mm et Pentaconn 4,4 mm) et asymétrique (mini-jack 3,5 mm) Connectivité WiFi: bibande 2,4 GHz/5 GHz USB Type C (USB 2.0) Transmetteur Bluetooth: HWA, LDAC, aptX HD, aptX, SBC Récepteur Bluetooth: SBC, LDAC AirPlay Compatible DLNA/NAS UPNP FiiO Link Transfert des fichiers audio via WiFi Écran Taille de l'écran (diagonale): 5,15" (13 cm) 16 Millions de couleurs Dalle: IPS Hi-Res Angle de vue larges Résolution: 1440 x 720 pxiels Densité de pixels: 312 ppi Interface tactile: multitouche Mémoire RAM: 3 GB ROM: 64 GB ROM disponible pour l'utilisateur: environ 52 GB Extension possible par carte mémoire micro-SD (2 TB max.) Boutons Mise en marche/veille Titre précédent/suivant Potentiomètre de volume Connecteurs Port USB Type C USB2.0 (recharge de la batterie, transfert de fichiers, DAC USB, USB Audio) Sortie casque mini-jack 3,5 mm (asymétrique) Sortie casque mini-jack 2,5 mm (symétrique) Sortie casque Pentaconn 4,4 mm (symétrique) Sortie SPDIF mini-jack 3,5 mm partagée avec la sortie casque (384 kHz-32 bit/DSD128 Sortie Ligne mini-jack 3,5 mm partagée avec la sortie casque Audio Contrôle du volume: 120 pas Impédance de casque recommandée (asymétrique): 16~150 Ω Impédance de casque recommandée (symétrique): 16~300 Ω Égaliseur 10 bandes (±6 dB), 8 présélections + 1 mode personnalisable Balance: L10~R10 (par pas de 0,5 dB) Réglage du gain sur 2 positions: High / Low USB Audio: 384 kHz-32 bit/DSD128 (DoP/D2P/Native) USB DAC: 384 kHz-32 bit/DSD128 Fonctions de confort Mise à jour firmware possible via fichier zip et via WiFi (OTA) MQA 8x pris en charge Mode All to DSD Sortie de veille par double tap sur l'écran tactile Navigation: contrôle gestuel & barre de navigation Mise en veille et extinction programmable Réglage du volume maximum Applications tierces acceptées Spécifications sortie Ligne (pondéré A) Distorsion harmonique totale + bruit  (THD+N): Rapport signal/bruit (SNR): >119 dB Réponse en fréquence: 5 Hz~86 kHz (-3 dB) Bruit plancher: Tension de sortie: 1,95 V Séparation des canaux: >108 dB Spécifications sortie casque asymétrique mini-jack 3,5 mm (pondéré A) Puissance de sortie: ≥294 mW (16 Ω / THD+N＜1%) ≥200 mW (32 Ω /THD+N＜1%) ≥22 mW (300 Ω / THD+N＜1%) Tension de sortie: 2,5 V (charge 32 Ω /THD+N＜1%) 2,62 V (aucune charge) Impédance de sortie: ≤1,1 Ω Distorsion harmonique totale + bruit (THD+N): Séparation des canaux: >72 dB (1 kHz/charge 32 Ω) >113 dB (aucune charge) Réponse en fréquence: 5 Hz~86 kHz (-3 dB) Bruit plancher: Rapport signal/bruit (SNR): ≥118 dB Spécifications sorties casque symétriques mini-jack 2,5 mm & Pentaconn 4,4 mm (pondéré A) Puissance de sortie: ≥460 mW (16Ω / THD+N＜1%) ≥550 mW (32Ω /THD+N＜1%) ≥88,5 mW (300Ω /THD+N＜1%) Tension de sortie: 4,2V (charge 32Ω /THD+N＜1%) 5.15V (aucune charge) Impédance de sortie: ≤2,4Ω Distorsion harmonique totale + bruit (THD+N): Séparation des canaux: >108 dB (1kHz/charge 32Ω)

Je me sépare de ma tête Rhodes Colossus H100, très rare dans nos contrées.  Il s'agit d'un ampli haut de gamme tout lampes de 100W fabriqué à la main aux USA par Kyle Rhodes, d'une polyvalence bluffante.  Il dispose de 4 canaux (clean, crunch, lead 1 et lead 2), tous d'une grande qualité et parfaitement exploitables.  On va d'un clean chaud et pur très Fenderien jusqu'au rock le plus agressif et lourd, toujours avec la même qualité.  Je ne peux que vous conseiller d'aller jeter un oeil et une oreille sur les démos que l'on trouve sur internet.  Vous serez convaincu!  Chaque canal dispose de son propre EQ 3 bandes ainsi que de tout un tas de réglages permettant d'accéder à une très grande palette sonore.  Une présentation exhaustive serait très longue alors je colle avec paresse les specs techniques de la bête  "Channels 4 - Clean, Crunch, Lead 1 and 2 (lead channels are voiced identically and completely independent) Distortion Mode Switch Channel 2 (Crunch), Channel 3 (Lead 1), and Channel 4 (Lead 2) Fat Mode Switch Channel 3 (Lead 1) and Channel 4 (Lead 2) Channel 1 (Clean) Controls Gain, Bass, Middle, Treble, and Level knobs; Bright and Channel Select switches Channel 2 (Crunch) Controls Gain, Bass, Middle, Treble, and Level knobs; Bright, Channel Select, and Mode switches Channel 3 (Lead 1) Controls Gain, Bass, Middle, Treble, and Level knobs; Bright, Channel Select, Mode, and Tight switches Channel 3 (Lead 2) Controls Gain, Bass, Middle, Treble, and Level knobs; Bright, Channel Select, Mode, and Tight switches Remote Controllable Functions Channel select, all distortion modes, tight modes, master volume select, and loop bypass Control Options Front Panel (all except loop bypass), RCI™ (Rhodes Custom Interface), MIDI, and external contact closure input External Contact Closure Input 6 inputs assignable to any control function MIDI MIDI Input and Output / Thru MIDI Channel Omni or Selectable, only for CC control MIDI Control PC patch learning and direct CC control of individual functions MIDI Programming Automatic patch learning -- setup for desired patch, press the Learn button, and transmit a MIDI PC to associate with that patch Bias Test Points Measure with any DMM capable of DC millivolts, 1 mV = 1 mA of plate current, assume 460 plate volts Bias Adjustment Pot Location On top of amp chassis, near left most power tube. Guaranteed to bias properly with EL34, 6L6, or KT66. Output Power 100W with quartet, 50W with duet Output Impedance Switchable between 4, 8, or 16 ohms Cabinet Dimensions 26.25" L x 10" W x 10.75" H"  Je fournis avec un pédalier midi Cicognani permettant de le piloter.  Il est en excellent état cosmétique et de fonctionnement.

[TOP MINT] Nikon FG 50mm F/1.8 E series As New. Very Beautiful appearance, as new ! CAMERA BODY: Very beautiful appearance, as new, almost no scratches (only very few at the bottom, but hard to see) VIEWFINDER: No haze, no Fungus. There are few specs of dust (around 5) no impact on visibility at all. LENS: No haze, no Fungus, no Scratches. The focusing ring is a tiny bit tight but it doesn’t impact at all the usage, it feels great. Very sharp lens WORKING CONDITION: Everything works perfectly. The light meter works great. —————————————————————————— Tres belle caméra, sans coup, presque pas de rayures, comme neuve CORPS: très belle apparence, pratiquement aucune rayures VISEUR: Pas de champignons, pas de trouble. Il y a quelques poussières (5 environs) mais aucune gêne dans la visibilité. OBJECTIF: Pas de champignons, pas de trouble pas de rayures. Produit de très nettes images. L’anneau de mise au point est très légèrement « serré », ce n’est pas parfaitement fluide mais aucun impact sur l’utilisation, ça tourne bien sans accoups. ÉTAT DE MARCHE: Tout fonctionne parfaitement. RAS

Details L-Plate for Canon BG-E11 Grip (5DMk3 & 5DS/5DSR) Overview Really Right Stuff camera body plates are all custom designed for each camera body and precision machined from solid blocks of 6061-T6 aluminum. Fully compatible with 1.5" RRS Dovetail Standard, our plates feature precisely contoured anti-twist flanges for a perfect fit that prevents twisting between the camera and our plate. All of our quick-release plates utilize a custom machined 1/4"-20 threaded, captive-style mounting screw that threads into the tripod mounting socket of your camera body.  RRS camera L-Plates feature two dovetail mounting surfaces in the shape of an L; one on the bottom of your camera, and one on the left-hand side. This additional mounting option allows you to quickly change between landscape and portrait orientations while minimizing the need to recompose your shot, saving you time and hassle. Also, an L-Plate keeps your gear centered directly above the tripod's apex which helps maintain the best stability possible. Features - CNC machined 6061-T6 Aluminum - Anodized; Type II Black  - 1/4"-20 threaded accessory mounting socket - Laser engraved center mark - Custom cutout for shutter release cable - Full battery door access - Integrated QD (Quick Detach) socket Specs - Height: 5.3"/ 134mm - Length: 4.3"/ 105.2mm - Weight: 5.3oz/ 150g In the Box 1. (1) BGE11-LB L-Plate 2. (1) B107 custom 1/4"-20 captive screw 3. (1) 5/32" hex key for a B107 screw 4. (1) L-Plate user's guide

apogee big ben horloge externe Big Ben Studio Clock. Bonjour,Je vends mon horloge Apogee b'"'Big Benb'"'Très bon état • Direct Digital Synthesis (DDS) using Apogeeʼs C777 Clock Technology up to 192kHz • AES, S/PDIF, Optical I/O - Word Clock/Video In - 6 Word Clock Outs • Optional FireWire connection to facilitate clocking and format conversion with other Firewire devices • Realtime format conversion between all digital formats • Adaptive Loop Filtering (ALF) to optimize clock performance and minimize jitter • Fail safe lock to external sources (Sure Lock) • Word Clock termination sensing Inputs: • 2 x AES-EBU on XLR 44.1k-192k single-wide and 88.2-192k double-wide. • S/PDIF optical on TOS-LINK 44.1-48k • S/PDIF coaxial on RCA 44.1-192k • ADAT 44.1-48k • ADAT/SMUX II for 88.2-96k • ADAT/SMUX IV for 176.4-192k • Word Clock BNC 44.1-192k • Video Outputs: • 2 x AES-EBU on XLR single or double wide 44.1-192k • S/PDIF coaxial 44.1-192k • S/PDIF optical on TOS-LINK 44.1-48k • 6 x BNC Word Clock 44.1-192k (of which 2 can output x256fs, x4, x2, 1/2, 1/4 at apropriate sample rates) • ADAT • SMUX II • SMUX IV • Optional FireWire Specs: • Sample rates: 44.1/48-88.2/96-176/192. All +/- 10% • Varispeed in absolute frequency or relative musical values (i.e. semitones to allow pitch changes) • 4 digit numeric true sample rate indication • Universal power: 15 W 90-250 VAC 50-60 HZ En savoir plus Collaboration commerciale.

Tele-Objectif Fixe SIGMA AF (MINOLTA/SONY ALPHA) 400mm f/5,6 Wildlife Prime Lens Description: Téléobjectif idéal pour la photographie animalière. Très léger et compact pour ce type de focale. Compatibilité: Tous les boitiers argentiques et numériques Minolta AF et Sony Alpha (sans exception) seront directement compatibles. Les appareils à monture E nécessiterons un adaptateur. Etat optique: propre, sans rayures ni champignons. Des grains de poussière derrière l'élement frontal n'auront bien évidemment pas aucun effet négatif sur la qualité des clichés. Etat mécanique: Fluide et réactif. Diaphragme en très bon état. Etat esthétique: Bon état esthétique général. Veuillez consulter les photos ci-jointes pour avoir une idée générale. Livré avec: deux bouchons. Le pare-soleil est intégré dans l'objectif. Je vous invite à consulter mes autres ventes Description: Excellent telephoto lens, taking in consideration its the focal lenth the lens is really light, well built and compact. It is ideal for the wildlife photography. This is an autofocus lens. Compatibility: The lens will be compatible with analog and digital Minolta AF and Sony Alpha bodies. All the Sony Alpha will be directly compatible. E-Mount cameras will need an adapter. Optical condition: Optics are clean, without scratches or mushrooms. There are just some tiny specs of dust inside the lens which will not affect picture quality anyway. Mecanical condition: Smooth and fully working mecanics. Aesthetical condition: Good overall condition, minor marks of carefull use, nothing serious. Lot includes: front and rear caps, built-in hood.  _gsrx_vers_827 (GS 7.0.13 (827))

Lecteur réseau Cambridge Sonata NP30-S (Comme neuf. Utilisé 10 h). Parfait état.. Cause double emploi. Fourni dans sa boite d'origine, avec tous les accessoires. Télécommande, câbles, manuel d'emploi (8 langues)  Son Hi-Res (fichiers 24/96. Ne lit pas les fichiers 88,2 kHz), son audiophile, très fin, détaillé. Radios internet. Payement PayPal. Envoi dans un dépôt relais. 20 € Cambridge Sonata NP30-S Network Drive (Like new, used 10 hours). Excellent condition (dual purpose) Supplied in its original box, with all accessories. Remote control, cables, user manual (8 languages) His Hi-Res (24/96 files, does not read 88.2 kHz files), audiophile sound, fine and detailed. Internet radios. Specs:  https://www.son-video.com/article/lecteurs-reseau-av/cambridge/sonata-np30-noir http://audiocentre.co.id/product.php?product=638 Payment PayPal. For international shipping cost will apply

Up for sale another BEAUTIFUL guitar ! One rare FENDER STRATOCASTER '62 RELIC IN CANDY APPLE RED FINISH ! IT'S A 2007 NAMM SHOW CUSTOM SHOP LIMITED EDITION ! Well, well, well... what a beauty !  Ok. If you're reading this, you already know that Fender reserves its top woods for Namm Shows. Its best craftmanshift and know-how too. What you get here is the cream of Fender's Custom Shop ! It's the second one I own in this insane Candy Apple Red Relic finish, also from 2007 Namm Show. I sold the first one to my good friend Javier Vargas, who played it a lot live. Unbelievable tone machine ! A true eye catcher too, as it's a RARE finish ! You'll get all the specs on the Custom Shop Floor Traveler form. Pickups are genuine Fender Custom Shop, wounded by Abygail Ybarra ! Limited Edition Plate & case. There's nothing to say here... it's perfect and beautiful ! WYSIWYG ! Obviously, there's NO break, repair nor anything wrong with this guitar. Just have a look at how it looks under daylight ! WOW !    Grab this RARE BIRD NOW while you can ! It will be professionnally packed. Shipping quotes as follows:  - To France: 75,00 euros via UPS, envoi assuré à 100%, - To Europe: 145 euros, fully insured via UPS, - To USA, Canada & Japan: 295 euros, fully insured via UPS.     Vendo otra magnífica guitarra ! Es una FENDER STRATOCASTER '62 RELIC HECHA PARA EL NAMM SHOW ! ES UNA EDICIÓN LIMITADA DEL 2007, ENVEJECIDA EN EL CUSTOM SHOP ! Esta guitarra es una pasada. Ya sabeís que Fender reserva sus mejores guitarras para las ferias del Namm, puesto que es su vitrina del saber-hacer del Custom Shop ! Esta guitarra no falla, es tremenda. En realidad, es la segunda que tengo de esta serie limitada del 2007, en el mismo acabado. La primera se la vendí a Javier Vargas, que la tocó muchísimo en directo en los años 2008-2009. Fue una de sus preferidas. Resumiendo: guitarrón al canto. No tiene ningún desperfecto, arañazo, nada que no venga de fábrica (acordaros que lleva el acabado MUY desgastado "Relic", que incluye un envejecido del barniz y de las partes metálicas). Este acabado Candy Apple Red es muy bonito. Teneís todas las características de la guitarra en la hoja de construcción del Custom Shop. Las pastillas fueron hechas por la mismísima Abygail Ybarra ! La guitarra viene con todo lo que se ve en las fotos (placa y estuche de edición limitada, Certificado del Custom Shop, etc.). Es una guitarra magnífica. Lo mejor de Fender. Cómpra esta joya mientras puedas !   La guitarra se encuentra fisicamente en Francia, por lo que los gastos de envío a España serán de 145 euros, seguro incluido y OBLIGATORIO (acúerdate que tan solo el seguro asciende al 1% del precio final). Some examples of my feedbacks: lil-boyy (SG Junior 1965): Fantastic Guitar !!! Best seller I've ever seen !!! You can easily trust him !!!   sunshinebakery (SG Special 1966): simply THE BEST seller I ever dealt with! A++++++++   yannick6580 (SG Junior 1967) : transaction rapide, emballage nickel, pas de problème!!!!!   jruau (SG Standard 1967) : great item, good communication - great international er !!! A+   kekingflash (SG Standard 1968): La guitarra es increible¡¡¡   rukastenun (SG Standard 1971): Trato excelente y vendedor totalmente fiable. Estoy muy contento. Lo recomiendo!   luis1414 (SG Gary Rossington): Magnífico, seguridad, flexibilidad y garantía.   I WILL APPLY A 50,00 EUROS REBATE ON SHIPPING'S COSTS IN CASE PAYMENT IS DONE VIA BANK WIRE. BID WITH CONFIDENCE ! I'M A TRUSTWORTHY SELLER WITH 100% RATING AND MORE THAN 2.000 POSITIVE FEEDBACKS !

Mallette sur mesure en bois pour book / dossier / portfolio de photographe, artiste, graphiste. Réf. B2 Construction robuste et soignée, réalisée sur mesure par une entreprise spécialisée. Design unique, seulement 4 exemplaires fabriqués! (en 2 versions de dimensions extérieures légèrement différentes, 2 ex. de chaque) Caractéristiques communes aux 4 mallettes: Contreplaqué verni, petits côtés épaisseur 8 mm, grandes faces épaisseurs 4-5 mm. Charnières et serrures acier, 4 pieds plastique. Garniture intérieure en mousse rigide noire. Caractéristiques propres à cette mallette (Réf. B2): Fabriquée en 2000, peu servi, uniquement utilisée par moi-même, n'a pas subi les transports par coursiers. La teinte du bois est moins chaude et sa texture plus uniforme que celle des 2 mallettes plus anciennes. Porte-étiquette acier disponible mais non monté. Les vis de fixation des charnières et serrures sont un peu apparentes à l'intérieur, voir photos. L'intérieur est identique et aux mêmes dimensions que les 2 mallettes plus anciennes. Dimensions extérieures: 49 x 38 x 10 cm bois seul, hors accessoires; Dimensions intérieures: 40 x 31,5 x 4 cm, coins arrondis. Poids env. 2,6 kg. Plus de photos sur demande. Expédition avec assurance: dépôt en Point relais Mondial Relay, Colissimo recommandé, remise en mains propres (Paris 17e). Comparez bien les annonces pour les 4 mallettes. Frais d'envoi groupé pour 2 ou plus. ______________________________________________________________________ ______________________________________________________________________ Custom-made wooden portfolio case for photographers, artists, designers. Ref. B2 Sturdy construction, made to measure by a specialized company. Unique design, only 4 cases ever made! (in 2 versions, exterior dimensions differ slightly, 2 cases each) Common specs to all 4 cases: Veneered plywood, narrow sides 8 mm thick, large sides 4-5 mm. Steel hinges and locks, 4 plastic feet. Black rigid foam inside fit. Specific features to this case (Ref. B2): Manufactured in 2000, little used by myself only, no transport by couriers. The wood color is less warm and its texture more uniform than that of the 2 older cases. Steel label holder available but not attached. Lock and hinge screws are a little visible on the inside, see photos. Inside fit similar as the older ones, to the same dimensions. Outer dimensions: 49 x 38 x 10 cm / 19" x 15" x 4" wood only, excluding accessories; Inner dimensions: 40 x 31.5 x 4 cm / 15,7" x 12.4" x 1.6", with rounded corners. Weight approx. 2.6 kg / 5.8 lbs. More photos on request. Please carefully compare the 4 cases for sale. Grouped shipping for 2 or more. Worldwide shipping with insurance: Colissimo (French Post), Mondial Relay where available (Au, Be, De, Es, It, Lux, NL, Pt, UK). Free local pick-up (Paris, France). Careful packing. Please contact me for shipping options and pricing before paying, as actual shipping cost may be lower than stated according to your country.

Mallette sur mesure en bois pour book / dossier / portfolio de photographe, artiste, graphiste. Réf. A2 Construction robuste et soignée, réalisée sur mesure par une entreprise spécialisée. Design unique, seulement 4 exemplaires fabriqués! (en 2 versions de dimensions extérieures légèrement différentes, 2 ex. de chaque) Caractéristiques communes aux 4 mallettes: Contreplaqué verni, petits côtés épaisseur 8 mm, grandes faces épaisseurs 4-5 mm. Charnières et serrures acier, 4 pieds plastique. Garniture intérieure en mousse rigide noire. Caractéristiques propres à cette mallette (Réf. A2): Fabriquée vers 1996, servi plusieurs années en agence, a subi les rudes transports par coursiers. La structure a bien résisté mais des coups et rayures sont visibles sur le bois. Un coin un peu abîmé. Reste un petit intervalle entre les deux cotés, mallette fermée. Voir photos. Cette mallette est moins chère que les autres pour cette raison. L'intérieur a été refait à neuf en même temps que les mallettes plus récentes, aux mêmes dimensions. Dimensions extérieures: 56 x 39 x 10 cm bois seul, hors accessoires; Dimensions intérieures: 40 x 31,5 x 4 cm, coins arrondis. Poids env. 3 kg. Plus de photos sur demande. Expédition avec assurance: dépôt en Point relais Mondial Relay, Colissimo recommandé, remise en mains propres (Paris 17e). Comparez bien les annonces pour les 4 mallettes. Frais d'envoi groupé pour 2 ou plus. ______________________________________________________________________ ______________________________________________________________________ Custom-made wooden portfolio case for photographers, artists, designers. Ref. A2 Sturdy construction, made to measure by a specialized company. Unique design, only 4 cases ever made! (in 2 versions, exterior dimensions differ slightly, 2 cases each) Common specs to all 4 cases: Veneered plywood, narrow sides 8 mm thick, large sides 4-5 mm. Steel hinges and locks, 4 plastic feet. Black rigid foam inside fit. Specific features to this case (Ref. A2): Manufactured around 1996, used for several years, including careless transport by couriers. The structure has withstood abuse but some blows and scratches are visible on the wood surface. One corner a little damaged. A small gap remains between sides when closed. See photos. This case is cheaper because of these defects. Inside fit has been remodeled at the same time as the newer ones, to the same dimensions. Outer dimensions: 56 x 39 x 10 cm / 22" x 15" x 4" wood only, excluding accessories; Inner dimensions: 40 x 31.5 x 4 cm / 15,7" x 12.4" x 1.6", with rounded corners. Weight approx. 3 kg / 6.7 lbs. More photos on request. Please carefully compare the 4 cases for sale. Grouped shipping for 2 or more. Worldwide shipping with insurance: Colissimo (French Post), Mondial Relay where available (Au, Be, De, Es, It, Lux, Nl, Pt, UK). Free local pick-up (Paris, France). Careful packing. Please contact me for shipping options and pricing before paying, as actual shipping cost may be lower than stated according to your country.

Je vend ma Ibanez Prestige 1670MZ, un modèle assez peu commun en Europe et aux Etats-Unis car elle fait partie d'une série limitée au marché japonais. Ce qui la distingue de certains modèles est la tête non matching rappelant les modèle Andy Timmons, choix esthétique m'ayant conquis lors de l'achat chez Broc Music à Nîmes il y'a a peu prés 2 ans. La guitare a subit quelques modifications de la parts de mon luthier Noé Audollent, situé à St Georges d'Orques. Les Micros Ibanez d'origines ne sont pas mauvais du tout, néanmoins le V7 Bridge manquait cruellement de patate, je l'ai fait remplacer par un Seymour Duncan Custom TB-5, qui sonne nettement mieux. Le Potard de tonalité a été complètement déconnecté (en même temps, qui en a besoin ?), le potard de volume a lui été remplacé par un potard DiMarzio, qui a une bien meilleure course. Le Vibrato Edge ZPS3 a été réglé en Dive Only à la Van Halen à l'aide dune petite cale en bois (tout à fait retirable), ce qui a pour effet de permettre d'accorder la guitare en Drop D (les fine tuners Ibanez sont plus longs que ceux des OFR/Schaller/Gotoh...) mais aussi devoir une tenue d'accord à toutes épreuves (je la réaccordait a peu près une fois toutes les 2 semaines...Et je ne suis pas le plus tendre avec mes instrument en tournée !). Comme le montre les photos, la guitare à été pas mal jouée, autant en répète qu'en live et présente donc quelques pocs, ainsi qu'une trace de ponçage a la 24ème frette due a une planification. Vendue avec son case original Specs: Corps: Solid Body Bois Du Corp: Tilleul Construction: Manche visé "All Access Neck Joint" Chevalet: Vibrato Edge Zeo ZPS3 Couleur de l’accastillage: Cosmo Black Manche: 3 Pieces Erable - Bandes de Noisetier Forme du Manche: Wizard HP Prestige Touche/Fingerboard: Érable Repères / Inlays: Points Noirs 24 Fretes Jumbo Clés: Gotoh SG381Electronique: Configuration HSH Micro Manche: Ibanez V8 Micro du milieu: Ibanez S1 Micro Chevalet: Seymour Duncan TB5 "custom" Controles: Volume/switch 5 positions (tone Bypassed)

Objectif Tele Fixe SIGMA 85mm f/1,4 EX DG Portrait - BOITE/HOUSSE/PARE-SOLEIL/UV Description: Objectif à focale fixe 85mm et à mise au point automatique représentant un très beau rapport qualité/prix. Idéal pour les portraits. Personnellement je le trouve meilleur que le Nikon AF-D 85mm 1,4. Et il est certainement plus rapide que ce dernier et il est motorisé donc sera compatible avec les boitiers numériques sans moteur AF Compatibilité: Tous les boitiers numériques et certains boitiers argentiques AF à monture Nikon F. L’objectif est motorisé, il sera donc compatible avec les séries D3000/5000. Etat optique: Propre, sans champignons ou poussières internes (il y a un-deux micrograins seulement).  Etat mécanique: Fluide. Diaphragme en très bon état.  Etat esthétique:  Très bon état esthétique général. Pas beaucoup d’usure. Vous pouvez avoir une idée générale sur l'état esthétique à partir des photos.  Livré avec: Tous les accessoires d’origine (housse, pare-soleil, ralonge de pare-soleil, boite, bouchons) + un filtre UV HOYA Je vous invite à consulter mes autres ventes Description: Excellent and fast portrait prime lens. This is an autofocus lens. It has excellent optical caracteristics and produces pictures of outstanding quality. As for me it is even better than Nikon’s AF-D version, and of course it is faster and compatible with non-motorised bodies. Compatibility: The lens will be compatible with all Nikon digital and some analog AF bodies including series D3000/5000 Optical condition: Optics are clean, without scratches, dust (juste a couple of tiny specs overall) or mushrooms.  Mecanical condition: Smooth and fully working mecanics. Snappy aperture Aesthetical condition: Very good overall condition (you may have a better idea refering to pictures).  Lot includes: original box and accessories + Hoya UV filter  _gsrx_vers_419 (GS 6.0.7 (419))  _gsrx_vers_827 (GS 7.0.13 (827))

IDEAL POUR OFFRIR A NOEL LECTEUR IPOD 6EME GENERATION RECONDITIONNEE A NEUF BATTERIE ORIGINALE ET NEUVE AUCUNE RAYURE NI IMPACT  VENDU DANS L EMBALLAGE D ORIGINE ET SCELLEE Apple iPod Touch 6th 6eme Génération  128GB A1574 Refurbished to Original New Condition 128GB -  Fitted with Brand New Screen, Case and has Brand New Battery.   Details: - Refurbished to Original Condition. - Fitted with New Screen and New Case - Brand New Battery. - Fully tested and Checked. - Other Sizes and Colours Available  - Also have iPod 6th Gen Available in all Colours and sizes. - 7th Gen Available soon. Google - "iPod Touch 5th Generation Technical Specification"  for Specs Package Includes: - iPod Touch - Lightning USB cable Thanks for looking and don't forget to look at my other items!

Condition is good but Please pay attention to the detail pictures for better understanding about body condition, actual unit may have very minor marks / scratches and The pictures are a part of the description, Please look at all of them carefully.  It comes with EU used Power supply only. Please Pay Attention: this ad is about single VIVE VR BASE STATION Only, and you’ll pay just for that one you see in pictures only. IT’S NOT SET. IT’S NOT PAIR!!!! SteamVR Base Station 2.0 specs: Now with wide-area tracking, Base Station 2.0 powers the presence and immersion of room-scale virtual reality by helping VIVE Pro, VIVE Pro Eye or Cosmos Elite headsets and controllers track their exact locations. Features wireless syncing. Includes one base station and one EU power adapter. Fits standard threaded mounting points Cord: 2.5m(8’2’’) Up to 1000 sq. ft* ---Compatible with the following products---- VIVE Pro Series VIVE Pro Eye Series VIVE Cosmos Elite VALVE Index PIMAX HMDs ---Compatible with the following accessory--- VIVE Cosmos External Tracking Faceplate VALVE knuckles Controllers VIVE Controller(2.0) VIVE Tracker(2.0) ---Not compatible with the following accessories--- VIVE Controller(1.0) VIVE Tracker(1.0) VIVE Cosmos Controllers *Up to 10m x 10m(33’ x 33’) using four base stations. Up to 5m x 5m(16’5’’ x 16’5’’) using two base stations.

IDEAL POUR OFFRIR A NOEL LE LECTEUR IPOD 6EME GENERATION REFAIT SURFACE RECONDITIONNEE A NEUF BATTERIE ORIGINALE ET NEUVE AUCUNE RAYURE NI IMPACT  VENDU DANS L EMBALLAGE D ORIGINE ET SCELLEE Apple iPod Touch 6th Generation A1574 Refurbished to Original New Condition 64GB  -  Fitted with Brand New Screen, Case and has Brand New Battery.   Details: Refurbished to Original Condition. Fitted with New Screen and New Case Brand New Battery. Fully tested and Checked. Other Sizes and Colours Available  Also have iPod 6th Gen Available in all Colours and sizes. 7th Gen Available soon. Google - " iPod Touch 5th Generation Technical Specification "  for Specs Package Includes: iPod Touch Lightning USB cable Thanks for looking and don't forget to look at my other items!