Allows

Etat Neuf frais de port offert via UPS pour la France. RedNet D16 AES is a 1U 19in rack-mount interface featuring 16 channels of AES/EBU connectivity to and from a Dante audio network, with Ethernet redundancy for maximum network reliability. Perfect for bridging between digital consoles, power amplifiers or any other AES3 equipped audio equipment and a Dante network, RedNet D16 AES has a Sample Rate Convertor (SRC) on each input pair allowing instant operation with any AES3 source. Word Clock and Digital Audio Reference Signal (DARS) connections provide synchronisation with a wide range of hardware, while S/PDIF I/O allows the integration of equipment such as CD or solid state recorders/players. 16 Channel RedNet AES3 Interface for Dante Network AES3 connectivity allows connection of external converters, effects units, mixing consoles or any other AES3 equipped audio equipment to the Dante audio network Dual rear-panel Ethernet connectors (primary and secondary connectors) allow maximum network reliability with seamless switchover to a standby network in the unlikely event of a network failure. The ports can alternatively be used to daisy-chain additional units. SRC allows external equipment to run at any sample rate, irrespective of the sample rate or clocking of the Dante audio network Compact design allows maximum functionality in minimum rack space, with a full 16 channels of I/O in 1U. RedNet D16 AES features the standard trademark red anodised front panel RedNet D16 provides two 8-channel AES59 combined I/O DB25 connections. In addition, a pair of XLR3 connectors duplicates channels 1 & 2 The rear panel XLR input connector can either be used as a DARS input or as a traditional AES3 audio input, replacing channels 1‰ÛÒ2 of the DB25 inputs S/PDIF input and outputs are provided on RCA connectors; ideal for connecting CD players or solid-state recorders. The input replaces channels 3 & 4 in the DB25 connector while the output can be assigned to replicate any adjacent odd/even output pair Word Clock I/O on BNC connectors allows synchronisation of the Dante network to house clock, or syncing external equipment to the Dante network RedNet Control 2 software provides comprehensive remote control capability via a powerful tabbed browser-like graphic user interface, handling up to 600 devices

Upgrade for the YAMAHA DX7 (SER-7 Special Edition). The Special Edition ROM (SER-7) for the vintage DX7 enhances the performance and MIDI capabilties of the unit. The features of the Special Edition ROM are: - Function parameters for each Voice can be saved to Internal Memory or a RAM cartridge. Current Master Tune settings are displayed. - Expanded MIDI Channel Information features allow you to enable or disable Program and Control changes. - Expanded MIDI System Information On/Off features allow transmission of system exclusive data of a single Voice or all 32 Voices contained in Internal Memory. - Initialization feature allows initializing Function parameters of a single Voice or all 32 Voices. - An enhanced MIDI Receive feature allows selection of Omni mode or any one of the MIDI channels 1 through 16. - An enhanced MIDI Transmit feature allows setting to any one of the 16 MIDI channels. - Aftertouch On/Off feature. This parameter can now be stored with each individual Voice. - An enhanced Main Volume Transmit feature allows transmission of MIDI volume data by utilizing the Volume jack with a FC7 Foot Pedal. This parameter can be stored to each voice. Documentation and installation instructions are availables here: YAMAHA/DX7-se_rom.pdf

TWS Casque sans fil Bluetooth Écouteurs Écouteurs intra-auriculaires pour iPh SH Detailed description: Colour: Black Material: ABS Size: 1.7 * 2.9 * 2.1cm Bluetooth version: 5.0 EDR Prompt tone: English Effective distance: 10m (reachable) Noise reduction version: CVC8.0 Microphone: bring Binaural pairing method: automatic pairing after booting Speaker diameter: 8mm Impedance: 32Ω Sensitivity: 42db Distortion: ±5% Waterproof rating: IPX7 (waterproof) Battery capacity: earphone 50mAH, charging compartment: 1200mAH Earphone usage time: 4-6 hours (depending on volume) Headphone charging time: 1 hour Battery compartment charging port: micro USB USB output: 5V 1A Highlight description: 1. The wireless Bluetooth headset provides a clear and high-quality audio listening experience. 2. Smooth bass response allows you to enjoy various styles of music. 3. Lightweight, very suitable for sports, walking, running or favorite activities. 4. Bluetooth 5.0, energy saving, improving data transmission and reducing interference. 5. Long lasting rechargeable battery, 6. Up to 4-6 hours of playing time and long standby time. 7. The built-in microphone allows these earphones to act as earphones for hands-free calls via mobile devices. Parts List: 2X Bluetooth headset 1X battery compartment 1X USB charging cable 1X English manual Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. About US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Detailed description: Colour: Black Material: ABS Size: 1.7 * 2.9 * 2.1cm Bluetooth version: 5.0 EDR Prompt tone: English Effective distance: 10m (reachable) Noise reduction version: CVC8.0 Microphone: bring Binaural pairing method: automatic pairing after booting Speaker diameter: 8mm Impedance: 32Ω Sensitivity: 42db Distortion: ±5% Waterproof rating: IPX7 (waterproof) Battery capacity: earphone 50mAH, charging compartment: 1200mAH Earphone usage time: 4-6 hours (depending on volume) Headphone charging time: 1 hour Battery compartment charging port: micro USB USB output: 5V 1A Highlight description: 1. The wireless Bluetooth headset provides a clear and high-quality audio listening experience. 2. Smooth bass response allows you to enjoy various styles of music. 3. Lightweight, very suitable for sports, walking, running or favorite activities. 4. Bluetooth 5.0, energy saving, improving data transmission and reducing interference. 5. Long lasting rechargeable battery, 6. Up to 4-6 hours of playing time and long standby time. 7. The built-in microphone allows these earphones to act as earphones for hands-free calls via mobile devices. Parts List: 2X Bluetooth headset 1X battery compartment 1X USB charging cable 1X English manual PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 19-janv.-21 à 10:52:58 Paris, le vendeur a ajouté les informations suivantes:

Upgrade for the YAMAHA DX7 (SER-7 Special Edition). The Special Edition ROM (SER-7) for the vintage DX7 enhances the performance and MIDI capabilties. The features of the Special Edition ROM are: - Function parameters for each Voice can be saved to Internal Memory or a RAM cartridge. Current Master Tune settings are displayed. - Expanded MIDI Channel Information features allow you to enable or disable Program and Control changes. - Expanded MIDI System Information On/Off features allow transmission of system exclusive data of a single Voice or all 32 Voices contained in Internal Memory. - Initialization feature allows initializing Function parameters of a single Voice or all 32 Voices. - An enhanced MIDI Receive feature allows selection of Omni mode or any one of the MIDI channels 1 through 16. - An enhanced MIDI Transmit feature allows setting to any one of the 16 MIDI channels. - Aftertouch On/Off feature. This parameter can now be stored with each individual Voice. - An enhanced Main Volume Transmit feature allows transmission of MIDI volume data by utilizing the Volume jack with a FC7 Foot Pedal. This parameter can be stored to each voice. Documentation and installation instructions are availables here: YAMAHA/DX7-se_rom.pdf

- - - - - - - - - Store category Sign Up Now ! You may also like Saramonic Blink500 Pro B2 Wireless Lavalier Lapel Microphone For Phone DSLR Came Product Description Saramonic Blink 500 Blink500 Pro B2 Wireless Lavalier Microphone Dual Channel Studio Condenser Interview Mic for Phone DSLR The Saramonic Blink500 Pro systems are incredibly lightweight, ultracompact and easy- to-use wireless microphone system for up to 2 people. The microphone delivers exceptional, broadcast-quality sound to DSLR, Mirrorless and Video cameras, Smartphones, Tablets, Computers, and more. The transmitters and receivers deliver a remarkable 8-hours of run time on a single charge and feature quick charging. The supplied charging case allows you to charge the transmitters and receivers quick charging. The supplied charging case allows you to charge the transmitters and receivers battery packs. The Saramonic Blink500 Pro systems are incredibly lightweight, ultracompact and easy- to-use wireless microphone system for up to 2 people. The microphone delivers exceptional, broadcast-quality sound to DSLR, Mirrorless and Video cameras, Smartphones, Tablets, Computers, and more. The transmitters and receivers deliver a remarkable 8-hours of run time on a single charge and feature quick charging. The supplied charging case allows you to charge the transmitters and receivers quick charging. The supplied charging case allows you to charge the transmitters and receivers battery packs. Blink500 Pro RX Transmission Type:2.4GHz Digital Frequency Modulation: GFSK Operating Range:Up to 328′(100m) Audio Output Connector: 3.5mm jack Audio Output level: –60 dBV to -20dBV Power Requirements: Built-in Li-ion Battery or Micro USB DC 5V or Charging Contact Headphone jack:3.5mm Built-In Battery Life: Approx.8 hours Antenna:PIFA Antenna Weight:Approx. 32g(1.13oz) Dimensions: 56×38×29.4mm Operating Temperature: 0℃ to 50℃ Storage Temperature: -20℃ to +55℃ Blink500 Pro TX Transmission Type:2.4GHz Digital Frequency Modulation:GFSK Operating Range:Up to 328′(100m) RF Output Power:10mW Polar Pattern:Omnidirectional Frequency Response: 50Hz-18KHz Maximum SPL:Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL Sensitivity:Built-in Microphone: -39dB Lavalier Microphone: -39dB SNR:＞78dB Reference audio input level: -30～42dBv MIC input,0 dB attenuation Power Requirements: Built-in Li-ion Battery or Micro USB DC 5V or Charging Contact Built-in Battery Life:Approx.8 hours Antenna: PIFA Antenna Audio Inputs: 3.5mm TRS Lavalier Mic/Line– in Input or Built – in Microphone Weight: Approx. 32g(1.13oz) Dimensions: 56.5×38×26.1mm Operating Temperature:0℃ to 50℃ Storage Temperature:-20℃ to +55℃ Blink500 Pro Charging Case Power Requirements Powered by USB-C port (5V/1.5A) Power Capacity 2000mAh(B2)/1200mAh(B1) Charging Time 4/3 hours Weight 268g (9.45 oz)/200g (7.05 oz) Dimensions 165.8×102.9×39.7 mm/123×102×39.7mm Operating Temperature 0°C to 50°C Storage Temperature –20°C to +55°C Packing List 1× Blink500 Pro RX Receiver with Built-In Clip and Camera Shoe-Mount (Integrated with OLED Display) 2× Blink500 Pro TX Transmitter with OLED Display and Built-In Microphone 1× Blink500 Pro B2 BOX Charging Case 1× Zipper Bag 1× 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRS Output Cable for Cameras 1× 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRRS Output Cable for Smartphones and Tablets 1× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cable 1× 1’ (30.5 cm) Gold-Plated Micro USB to USB-A Charging Cable 2× SR-M1 Omnidirectional Lavalier Microphone 2× Alligator-Style Lavalier Microphone Clip 2× Foam Lavalier Windscreen 2× High-Wind Fur Windscreen for TX Transmitter 1× Warranty Card 1× User Manual Payment Delivery details Return Policy

SONY MB-806A TUNER BASE UNIT Wireless Microphone Frame Tuner Base. BON ETAT GENERAL GOOD GENERAL CONDITION SHIPPING POSSIBLE TO FRANCE, BELGIUM, UK, SPAIN, PORTUGAL, ITALY, LUXEMBOURG, NETHERLANDS, AUSTRIA. OTHER COUNTRIES ASK FOR SHIPPING COSTS. Features The Sony MB-806AUHF Tuner Base Unit features a modular design that conveniently accommodates up to six WRU-806A tuner modules. Up to six transmitters may be used simultaneously with six WRU-806A tuner modules installed. The rear panel provides six XLR (mic/line selectable) outputs and a stereo mix output. The MB-806A features a single 19" rack space design. Holds up to 6 "WRU" diversity tuner modules in 1 rack space. Compact modular design allows user configurability of one to six diversity tuners in a single rack space *WRU-806A tuner modules are sold seperately Built-In Active Antenna Divider Allows one pair of AN-820A or K1314 antennas to operate all six channels Supplies 9v DC antenna power to antenna jacks Output Level Switch Selects mic or line operating level for all outputs. Antenna Gain Switch Allows user to adjust antenna sensitivity to prevent overload of antenna section of receiver

Feature: The wireless Bluetooth stereo earbuds A7 utilize the latest TWS (True Wireless Stereo) Bluetooth technology, the audio frequency range is similar to WIFI signal. With many years of Bluetooth experience and unique expertise in sound quality, the wireless earbuds guarantee superior sound and call quality. Advanced microphones for superior call technology and make sure that conversation quality. Experience up to 8 hours of music or talk time, Whether you are listening to songs or answering calls, relish in the freedom of true wireless and easy connectivity to your Android or Apple iOS smartphone. The A7 cord-free earbuds stay in place no matter how vigorous your work-out. Our unique wearing style allows you to choose to use either one or both e... Wireless Bluetooth 4.2 Headphones TWS Earbuds Earphones IOS Android Feature: The wireless Bluetooth stereo earbuds A7 utilize the latest TWS (True Wireless Stereo) Bluetooth technology, the audio frequency range is similar to WIFI signal. With many years of Bluetooth experience and unique expertise in sound quality, the wireless earbuds guarantee superior sound and call quality. Advanced microphones for superior call technology and make sure that conversation quality. Experience up to 8 hours of music or talk time, Whether you are listening to songs or answering calls, relish in the freedom of true wireless and easy connectivity to your Android or Apple iOS smartphone. The A7 cord-free earbuds stay in place no matter how vigorous your work-out. Our unique wearing style allows you to choose to use either one or both earbuds. No matter how hard you push yourself, you’ll enjoy the ultimate comfort and secure fit that comes with being truly wireless. TURE WIRELESS STEREO: Portable Stereo Sport Headphones, Sports Headsets Lightweight Earbuds With Mic for iPhone Samsung HTC LG and other Bluetooth devices. STATE OF THE ART EARPHONES DESIGN: Best workout Bluetooth headphones. Great for walking, Jogging, Hiking, Biking, Gym, and some other activity. SUPERB SOUND QUALITY: High-Quality Chip for Stereo Sound and Bass Sound.Clear High & Low Volume. It's Easy To Take and Make Calls, Voice Dialing with Superior Microphone Quality. Ideal for Car Calling and Friends Chatting, or Working Use. CVC NOISE CANCELLATION TECHNOLOGY: It has excellent noise cancellation technology with the use of CVC depth noise reduction. Bilateral stereo APT-X lossless sound quality, it provides a shock enjoyment with entering the ear in a deep bass voice. The sound hole design reduces an echo back of sound waves, making the sound room purer and the high, medium and bass more harmonious. LONG BATTERY LIFE: Built-in 300mAh battery box, it can charge the two true wireless earbuds 3 times without cable, Up to 8 hours music or talking time, you never have to worry about running out of battery on your wireless headphone. COMFORTABLE AND SECURE: Ergonomically designed with gel flex silicone earbuds to ensure your headphones stay comfortably firm in place to guarantee fatigue-free ears and tangle free comfort. Compatible Device: Bluetooth-enabled mobile phones, tablets, computer, watch, MP4, speaker. Bluetooth Standard: V4.2+EDR Bluetooth Profiles: HSP1.2、HFP1.6 、A2DP1.3、AVRCP1.5 Audio enhancements: CVC noise reduction Standby Time: Up to 20 Hours Battery type: Rechargeble lithium-ion polymer battery Battery capacity: 50 mAh (with a 300mAh protable battery case) How to use it? Binaural Mode: （Both earbuds work together） Note：This mode would need you to turn off the Bluetooth on phone firstly. 1. Pressing the two earbuds' main button for seconds at the same time till the Red&Blue light flash alternately; 2. Double-Click one the of earbuds (the other one keep still) to get paired with the other one, that would cost 3 seconds; 3. Turn on the Bluetooth on phone, find out "A7" and connect it, then you would hear the sound for both. If you want to use one, please refer below. That would be more easier. Single Mode: 1. Pressing the earbud's main button for seconds untill the Red&Blue light flash alternately; 2. Find out "A7" on Bluetooth and connect it, then you would hear the sound in one earbud. Note: The wireless buletooth stereo earbuds utilize the latest TWS (True Wireless) Bluetooth technology,the audio frequency range is similar with WIFI signal.It is a normal phenomenon that in individual cases, slave earbud(right chennal) might be interference by wireless signals but it connected automatically after without sound for 1-2 seconds while master earbud(left chennal)runs fine.Please try reconnect the earbud if it has a sound or connection problem. The distance between the headset and mobile phone can not be greater than 10M. The distance between the two earphones can not be greater than 50cm. If in Calling, just the Main earphone has the voice. Package Include: 2X Bluetooth Headset 1X Charger Dock 1X User Manual 1X Charging Cable 2X Earbuds Item Specifics EAN: 4895187192848 Marque: Qumox Numéro de pièce fabricant: F143U Payment 1.Quand le paiement des acheteurs est accompli, nous livrerons les marchandises dans un délai de 48 heures. 2.Le transport de fret demande normalement un délais de 6 à 15 jours 3.Nous acceptons seulement l'adresse de Paypal pour la livraison. Les acheteurs doivent s'assurer que l'adresse de Paypal correspond à celle de la réception avant paiement. Returns 1. L'acheteur doit nous informer dans un délai de 14 jours (A compter du jour de délivrance des marchandises). 2. Toutes les marchandises doivent être renvoyées dans leur emballage d'origine avec tous les accessoires au complet. Professional Quality Best Price New List Item Monster N-Tune 450 Overhead Bluetooth Headphone rouge EUR 32.99 Jaybird X4 Wireless Bluetooth Headphones Compatible iOS Android Noir EUR 89.99 Jaybird X4 Wireless Bluetooth Headphones Compatible iOS Android Storm EUR 89.99 Monster N-Tune 450 Overhead Bluetooth Headphone Bleu EUR 32.99 Monster N-Tune 450 Overhead Bluetooth Headphone Noir EUR 32.99 Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us Wireless Bluetooth 4.2 Headphones TWS Earbuds Earphones IOS Android Feature: The wireless Bluetooth stereo earbuds A7 utilize the latest TWS (True Wireless Stereo) Bluetooth technology, the audio frequency range is similar to WIFI signal. With many years of Bluetooth experience and unique expertise in sound quality, the wireless earbuds guarantee superior sound and call quality. Advanced microphones for superior call technology and make sure that conversation quality. Experience up to 8 hours of music or talk time, Whether you are listening to songs or answering calls, relish in the freedom of true wireless and easy connectivity to your Android or Apple iOS smartphone. The A7 cord-free earbuds stay in place no matter how vigorous your work-out. Our unique wearing style allows you to choose to use either one or both earbuds. No matter how hard you push yourself, you’ll enjoy the ultimate comfort and secure fit that comes with being truly wireless. TURE WIRELESS STEREO: Portable Stereo Sport Headphones, Sports Headsets Lightweight Earbuds With Mic for iPhone Samsung HTC LG and other Bluetooth devices. STATE OF THE ART EARPHONES DESIGN: Best workout Bluetooth headphones. Great for walking, Jogging, Hiking, Biking, Gym, and some other activity. SUPERB SOUND QUALITY: High-Quality Chip for Stereo Sound and Bass Sound.Clear High & Low Volume. It's Easy To Take and Make Calls, Voice Dialing with Superior Microphone Quality. Ideal for Car Calling and Friends Chatting, or Working Use. CVC NOISE CANCELLATION TECHNOLOGY: It has excellent noise cancellation technology with the use of CVC depth noise reduction. Bilateral stereo APT-X lossless sound quality, it provides a shock enjoyment with entering the ear in a deep bass voice. The sound hole design reduces an echo back of sound waves, making the sound room purer and the high, medium and bass more harmonious. LONG BATTERY LIFE: Built-in 300mAh battery box, it can charge the two true wireless earbuds 3 times without cable, Up to 8 hours music or talking time, you never have to worry about running out of battery on your wireless headphone. COMFORTABLE AND SECURE: Ergonomically designed with gel flex silicone earbuds to ensure your headphones stay comfortably firm in place to guarantee fatigue-free ears and tangle free comfort. Compatible Device: Bluetooth-enabled mobile phones, tablets, computer, watch, MP4, speaker. Bluetooth Standard: V4.2+EDR Bluetooth Profiles: HSP1.2、HFP1.6 、A2DP1.3、AVRCP1.5 Audio enhancements: CVC noise reduction Standby Time: Up to 20 Hours Battery type: Rechargeble lithium-ion polymer battery Battery capacity: 50 mAh (with a 300mAh protable battery case) How to use it? Binaural Mode: （Both earbuds work together） Note：This mode would need you to turn off the Bluetooth on phone firstly. 1. Pressing the two earbuds' main button for seconds at the same time till the Red&Blue light flash alternately; 2. Double-Click one the of earbuds (the other one keep still) to get paired with the other one, that would cost 3 seconds; 3. Turn on the Bluetooth on phone, find out "A7" and connect it, then you would hear the sound for both. If you want to use one, please refer below. That would be more easier. Single Mode: 1. Pressing the earbud's main button for seconds untill the Red&Blue light flash alternately; 2. Find out "A7" on Bluetooth and connect it, then you would hear the sound in one earbud. Note: The wireless buletooth stereo earbuds utilize the latest TWS (True Wireless) Bluetooth technology,the audio frequency range is similar with WIFI signal.It is a normal phenomenon that in individual cases, slave earbud(right chennal) might be interference by wireless signals but it connected automatically after without sound for 1-2 seconds while master earbud(left chennal)runs fine.Please try reconnect the earbud if it has a sound or connection problem. The distance between the headset and mobile phone can not be greater than 10M. The distance between the two earphones can not be greater than 50cm. If in Calling, just the Main earphone has the voice. Package Include: 2X Bluetooth Headset 1X Charger Dock 1X User Manual 1X Charging Cable 2X Earbuds Item Specifics EAN: 4895187192848 Marque: Qumox Numéro de pièce fabricant: F143U Payment Returns 1.Quand le paiement des acheteurs est accompli, nous livrerons les marchandises dans un délai de 48 heures. 2.Le transport de fret demande normalement un délais de 6 à 15 jours 3.Nous acceptons seulement l'adresse de Paypal pour la livraison. Les acheteurs doivent s'assurer que l'adresse de Paypal correspond à celle de la réception avant paiement. 1. L'acheteur doit nous informer dans un délai de 14 jours (A compter du jour de délivrance des marchandises). 2. Toutes les marchandises doivent être renvoyées dans leur emballage d'origine avec tous les accessoires au complet. Powered by SoldEazy

Support NOVOFLEX Uniset Made in Germany Construction solide. Support pour flashes multiples, lumières vidéo ou petits réflecteurs, micro, etc,…, avec son support de sa base pour l'appareil photo. Système sophistiqué permettant de fixer un appareil photo sur un support de base robuste et de mettre des flashes dans n’importe quelle position grâce à des bras articulés. La rigidité du système permet l’utilisation de flashs assez lourds dans n’importe quelle position. Les bras articulés sont interchangeables. Sur les 2 bras articulés on peut retirer une section, pour n’utiliser qu’un jeu de tiges. (Très utilisé pour la macrophotographie) On peut placer du matériel assez lourd sur la plaque qui supporte l’appareil photo (un appareil et son objectif pour 2 Kg et plus) Sur chacune des 2 têtes à rotule au pas de 1/4" on peut mettre un matériel avec ce pas de vis, ou bien viser une griffe pour emboîter un flash. Les capacités de direction de la lumière et de projection d'ombres qu'il permet avec des flashes permet de sérieuses possibilités créatives dans vos prises de vue macro ou autres. Matériel Neuf. Jamais utilisé. Caractéristiques: Dimensions: 24,4 x 7,9 x 4 cm (LxHxP) (plaque de base uniquement) (Poids: 360 g) Portée: conseillée 380 mm (max 450 mm) Distance maximale entre deux flashes:: 560 mm Poids: 900 g Fournis: - Base UNIPLA: 245 × 80 × 40 mm - 2 jeux de bras articulés. - 2 rotules - 2 supports flashes - Boite d’origine Si vous avez une question contactez-moi. Remise en main propre possible. (Dpt 37) Si vous achetez plusieurs objets les frais de port sont groupés; réduits. Livraison: J’expédie en France, en Union Européenne, Grande Bretagne et en Suisse. J’expédie régulièrement en Grande Bretagne, Allemagne, Italie,... Ce matériel sera expédié en envoi soigné Colissimo avec suivi postal. Ou livraison nationale et internationale standard: Mondial Relay en colis soigné avec suivi postal. - Livraison par Mondial Relay dans un point Relay pour les pays: France; Belgique; Luxembourg, Espagne - Livraison par Mondial Relay à domicile pour les pays:Allemagne, Royaume-Uni, Belgique, Luxembourg, Autriche, Espagne, Portugal et Italie Pas de taxes et frais de douane pour les acheteurs au sein de l'UE et du Royaume-Uni.                                                                                               - - - - - - - - - - - In english Novoflex Uniset flash Bracket Made in Germany Quality of solid construction. Bracket for multiple flashes, video lights or small reflectors, microphone, etc., with its basic support for the camera. Sophisticated system for attaching a camera to a sturdy base support and putting flashes in any position thanks to articulated arms. The rigidity of the system allows the use of fairly heavy flashes in any position. The articulated arms are interchangeable. On the 2 articulated arms one section can be removed, to use only a set of rods. (Very used for macrophotography) You can place quite heavy material on the plate that supports the camera (a camera and its lens for 2 Kg and more) On each of the 2 ball heads at the 1/4" pitch, you can put an accessory with this screw pitch, or aim for a flash shoe to fit a flash. The capabilities of light direction and shadow projection that it allows with flashes allows for serious creative possibilities in your macro or other shots. NEW equipment. Never used. So everything works perfectly. The joints, ball heads and the lockings. And he has no trace or scratch and he has not suffered any shock. All the stems are perfectly straight. Caractéristiques: Dimensions: 9.6 x 3.1 x 1.6" (WxHxD) [baseplate only] (Weight: 360 g / 0,8 lb) Extension: recommended

La meilleure reverb Spring, tout simplement... Comme neuve, en boite. SANS ALIM. Fonctionnement sans aucun problème. Mr Springgy™ The Ultimate Spring Reverb, All the Goodness of Spring Reverb, without the Crash, Hum or Breakage of the convention Pan. This will make your favorite amp Sound even Better! Finally you can truly get the sound of your old Fender reverb in a small box, I’m not kidding… For years I have been working on a design to allow you to have your favorite “Industry Standard” Spring Reverb Sound in a small pedal form. Mr Springgy™ Pedal was designed with the idea of being as transparent as possible, to not change the original sound as it comes out of the instrument. I worked for years on such a design, and have developed a circuit that doesn’t degrade the original sound; it Enhances it with more Clarity and Definition. This allows you to truly have that Deluxe sound and make your favorite amp sound SUPER. Now Mr Springgy™ is even better. With a Major added Feature that allows your Mr Springgy™ to Output Just the Reverb (Wet), out of the Main Output. This now allows Mr Springgy™ to be used in Studio’s, Live Mixing boards and more. So Get your very own Handmade Custom Reverb Pedal. Extremely Warm Sounding Reverb. Stereo outputs can also be used as a Stereo Splitter “Wet Only” Switch for Studio and Live Mixing. Quiet Switching Bright easy to see Blue LED

SCHNEIDER SUPER-SYMMAR XL 4,5/80mm MC ASPHERIC - En Etat proche du NEUF / In near MINT condition  - Lentilles propres, claires, sans champignon, traces ni rayure / Lens clean, clear, without fungus, without scratch or cleaning marks. - Obturateur copal 0, fonctionne à toutes les vitesses / Copal 0 shutter, works at all speeds.  - Made in Germany - Pour chambre 4x5, 5x7 / For 4x5 and 5x 7 Large Format Cameras - Objectif grand angle équivalent 21 mm en 4x5 / Wide angle lens: 21mm equivalent in 4 x 5 Large format. - Piqué exceptionnel, larges possibilités de mouvement, lumineux / Tack Sharp lens, wide movement possibilities, luminous lens. - Avec bouchons d'objectif avant et arrière / Comes with front and rear genuine lens caps. - Avec Pare soleil grand angle 67mm / Comes with a 67mm filter thread wide angle lens hood - n° de l'objectif: 14992344 / Serial number of the lens: 14992344            SCHNEIDER Center-Filter IIIb (+ 400 € quand neuf/ when new) - En excellent Etat / In excellent condition  - Valeur: plus de 400 € quand neuf / More than 400 € when New. - Pare soleil grand angle 86mm / Comes with a 86mm filter thread wide angle lens hood Excellent +++ condition for the the Schneider Super-Symmar 80mm XL lens. Comes with the Schneider Center-Filter IIIb. The Schneider 80mm f/4.5 Super-Symmar XL Lens is a professional wide angle lens for the 4x5 format, which provides an angle of view on 4x5 which is similar to a 21mm lens in the 35mm format. The Super-Symmar XL lenses are the world's first aspherical lens design for large format, producing incredible peak sharpness with excellent correction for distortion and a small overall size. The 80mm f/4.5's large image circle allows plenty of creative control for the photographer-in fact, it has the largest image circle of any 80mm large format lens. Beyond the coverage, the lens' large f/4.5 maximum aperture helps to ease the difficulty of focusing the camera in poor light. The 80mm Super-Symmar XL's 105° angle of coverage permits a generous 34mm of all-direction shift on the 4x5 format, which is particularly beneficial when capturing a building from ground level. It can be mounted upon any view or field camera, thanks to its tiny 43mm diameter rear barrel which only extends 14.8mm behind the mount, allowing plenty of space between the rear of the barrel and the image plane for tilts and swings. The 80mm Super-Symmar XL uses 67mm filters, and for critical work with transparency film it is strongly recommended to use the dedicated #3b center filter. Extremely sharp ultra wide lens for professional results in the 4x5 format (can also be used upon 5x7 cameras). World's first aspherical lens design series for large format. Excellent correction of perspective distortion. Increased coverage to an extreme 105°. Bright f/4.5 maximum aperture allows easier focusing in subdued light. Largest image circle of any 80mm large format lens. Maximum image circle of 211mm allows ±34mm of rise/fall/shift (in both vertical/horizontal composition) for 4x5 format. Accepts 67mm filters. Standard-style Copal #0 shutter with calibrated aperture scale and maximum 1/500th speed Schneider Filter IIIb INCLUDED !!!(+ 400 € New) Schneider IIIb center filter for critical correction of light falloff + Lens hood for a wide angle with filter (86mm)

The NiSi V5 Alpha 100mm Filter Holder is designed to allow for the convenient use of 100mm wide, 2mm thick filters. Use of this filter holder is easily accomplished by first screwing the included NiSi adapter ring for the V5 Alpha 100mm Filter Holder onto a lens with 82mm front filter threads. For lenses with front filter threads for diameters smaller than 82mm, a separately available step-up ring can be installed between the lens and the included adapter ring. After being fitted onto the adapter ring, the filter holder's pull-and-release locking pin helps to provide a reliable, yet adjustable connection that allows the holder to be rotated 360°, permitting the use of graduated neutral density and other filters that are enhanced by varied positioning. The NiSi V5 Alpha 100mm Filter Holder is preinstalled with three pairs of filter slots, a configuration that accommodates three rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter's edges. Contact with a filter's front- or rear-facing surfaces is avoided, particularly when using graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot. This filter holder can be used with a separately available NiSi 82mm Adapter Ring for C4 Cinema Filter Holder Kit and V5 100mm or V5 Pro 100mm Filter Holder Kits instead of its included adapter ring. If used with that separately available adapter ring, along with either a separately available NiSi 86mm Circular Polarizer Filter for Select NiSi Filter Holder Kits or a NiSi 86mm Enhanced Circular Polarizer Filter for Select NiSi Filter Holder Kits, the NiSi V5 Alpha 100mm Filter Holder can help create a filter holder kit that offers the same essential functions as a NiSi V5 Pro 100mm Filter Holder Kit. Adapter rings for lenses with 86mm or 95mm front filter threads are also separately available. The combination of either of those adapter rings with the filter holder cannot accommodate a NiSi 86mm circular polarizer filter; however, a polarization effect can instead be obtained by placing a separately available, 100mm wide, 2mm thick polarizer filter between one pair of the filter holder's slots. Durable aluminum alloy filter holder provides three pairs of filter slots, a configuration that accommodates up to three separately available 100mm wide, 2mm thick filters Each slot is designed to grip an installed filter only along the surface of the filter's edges, avoiding contact with a filter's front- or rear-facing surfaces Use of the filter holder can be easily accomplished by first screwing the included 82mm adapter ring onto a lens with 82mm front filter threads For lenses with front filter threads for diameters smaller than 82mm, a separately available step-up ring can be installed between the lens and the included adapter ring Pull-and-release locking pin on filter holder allows for a reliable connection to the 82mm adapter ring which allows the holder to be rotated 360° Durable and lightweight aluminum alloy construction

Rokinon Xeen 35mm T1.5 Lens for PL Mount. Mint condition, never used, delivered in its original box. Canon EF convertible mount for additional purchase. Specs: - This 35mm lens has an image circle that covers a full-frame sensor. When mounted on a camera with a full-frame sensor it provides you with what is considered a slightly wide angle of view. - The lens features metal construction to withstand the rigors of daily production, and comes with a support foot that can help take strain off your camera's lens port. - Dual right and left side focus and t-stop scales allow your focus puller to work from either side of the lens, without having to flip the lens in the mount, or facing upside numerals. - Each lens in the XEEN series share common focus and iris gear ring positions, which speeds up lens changes as accessories such as follow focus units or iris motors don't have to be re-positioned. - The common 114mm front diameter allows for quick lens changes as you don't have to swap out anti-reflection donuts or adapters to use the same matte box. - The non-rotating front allows you to use optional clip-on matte boxes. - Clickless aperture ring for smooth iris pulls. - A minimum focusing distance of 13" allows you to get up close to your subject.

A QUICK AND EASY SOLUTION FOR PROFESSIONAL SUPPORT. The DR-3 “Dr. Rhythm ”allows guitarists and composers to offer very elaborate rhythms to their music. This budget-friendly drum machine features some of the best acoustic and electronic drum sounds created by BOSS as well as a wide selection of bass sounds. Very suitable for improvisation, its rhythmic progressions and variations allow access to any style of music, and the new Total Sound Control DR-3 technology will give your programs real perfection. - Very economical BOSS rhythm machine for study and improvisation - Realistic drum, percussion and bass sounds with velocity-sensitive pads - Rhythmic progressions with 3 variations each (Intro, Verse, Fill and Ending) - TSC function with "Sound Shape" and "Ambience" for professional sound quality - 100 preset styles and 100 user styles programmable in real time or step by step - Pedal connector for foot control. - Battery or mains operation - Rhythmic progressions for instant improvisations If you prefer to spend less time programming and more improvising, the rhythmic progressions of the DR-3 are for you. Simply choose a style from among the 100 Presets available and use the 8 buttons on the front panel to move from one section to another. You can choose between 3 variations for each of the patterns (Intro, Verse, Fill and Ending), so you'll never experience monotony. - Simplified audio corrections and foot control The TSC BOSS (Total Sound Control) system allows you to modify the sound of a complete drum kit by applying specialized effects. The Sound Shape function adjusts the compression and the parametric 3-band equalization or acts on the sound space by the Ambience effect. An optional footswitch allows control of Intro / Start, Ending / Stop, pattern change (Verse, Variation On / Off, Loop On / Off), and battery power lets you take and use your DR -3 almost everywhere. Rhythmic stylesUser Styles: 100, Preset Styles: 100 * 11 patterns for a styleSongsUser: 100, maximum length: 250 patterns per songTSC (Total Sound Control)Preset Patches: 8, User Patches: 8Maximum polyphony12 voicesInstruments Drums and PercussionDrums and Percussion: 120, Basses: 12Resolution96 blackWeather20 to 260 bpmRecording modesReal time / step by stepPads13 (dynamic)ScreenBacklit LCD (2 lines of 16 characters)ConnectorsOutputs: L, R (RCA Phono type), L output (PHONES), R output (MONO) (1/4-inch phone type), Foot Switch input (Stereo 1/4-inch phone type), MIDI IN socket, DC IN jack (AC adapter)FoodDC9V: batteries (R6 / LR6 (AA) type) x 6, AC adapter (PSA series)Consumption200 mA * Battery life in continuous use and on battery power: approximately 5 hours (these measurements may vary depending on battery specifications and conditions of use)Accessoriesbatteries (Alkaline LR6 (AA) type) x 6, Owner's Manual, Roland Service Information SheetOptionsMains adapter: PSA series, Foot pedal: FS-5U, Foot pedal connector: Roland PCS-31LDIMENSIONS AND WEIGHTWidth213 mm 8-7/16 inchesDepth185 mm 7-5/16 inchesHeight53 mm 2-1/8 inchesWeight710 g 1 lbs. 10 oz. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- UNE SOLUTION RAPIDE ET FACILE POUR DES ACCOMPAGNEMENTS PROFESSIONNEL. La DR-3 «Dr. Rhythm» permet aux guitaristes et aux compositeurs d’offrir des rythmiques très élaborées à leur musique. Cette boîte à rythmes économique dispose en effet de certains des meilleurs sons de batterie acoustique et électronique créés par BOSS ainsi que d’u

Effectrode Phase-o-matic / Delta trem Rack prototype: Fonctionne, mais - le bouton b'"'colorb'"' du phaser a tendance à un peu trop pousser le circuit en oscillation (réglage interne à affiner) - il y a parfois un faux contact sur le bypass du delta trem (à la manipulation ou après un gros temps de chauffe). Il fonctionne donc dans l'ensemble mais nécessite un technicien pour être réellement utilisable, vendu dans l'état !! Ce n'est pas une copie, ce sont bien les circuits pcb originaux en interne (cf photos), et les lampes sont toutes neuves en JJ Tesla (5 au total); Grosse alim sur transfo Toroidal et potards de qualité ! Phase-O-Matic: DESCRIPTION On more subtle settings the Phaseomatic creates a beautiful, natural sounding vibrato (frequency modulation) and shimmering phasing effects, utilising exactly the same one- and two-stage “Cathodyne” tube circuitry used to in those incredible vintage Magnatone® amps. However, the Phaseomatic’s all-tube circuitry has two additional Cathodyne phase inverters, which allow it to generate a much richer, deeper vibrato and even intense, deep “tunnel” phasing as well as a host of cosmic and spacious sound effects heard on many 1950′s “B” science fiction movie soundtracks. FEATURES All Tube: The Phaseomatic utilises four “Cathodyne” tube phase inverters and photocells to create true vibrato and subtle, shimmering phase-chorused effects—pure tube signal processing operating at real amp plate voltages (300VDC!), just like in a vintage amp! Advanced Mixed-Wave Modulator: Twin LFOs that can generate triangle (linear sweep phasing), sine, pseudo-square (vibe), lopsided and various pulse wave shapes. “Frozen Sweep” Capability: The LFO is capable of super-long, super-slow 1/180Hz (three minutes!) sweep rates to generate rich, complex comb filter effects. If this isn’t slow enough then a constant output mode allows the comb notches to be “frozen” to create hollow sounding acoustic timbres. C.V. Inputs For external control from a voltage source or EV-5 expression pedal for lots of phase modulation possibilities. Frozen notches can be moved up and down. This action can be used in conjunction with the internal LFO of the Phaseomatic for articulate and beautiful sweep effects. Delta-Trem: he Delta-Trem™ authentically recreates the alluring, hypnotic tone and feel of a vintage amp tremolo. This is accomplished by using a ‘Raysistor’, a unique component made up from a filament lamp and photo-cell, in conjunction with a vacuum tube signal path – twice for stereo! This gives an exceptionally warm and musical tremolo effect that blends well with clean and overdriven guitar sounds. The dual signal path allows the pedal to operate in mono tremolo mode into a single amp or stereo where the sound is ping-ponged between two amps for a huge, spacious tone. Circuit operation is extremely quiet with none of the audible “ticking” often associated with tube amp tremolo. The Delta-Trem features a configurable low frequency oscillator that accurately reproduces the classic deep sine wave throb found on early Fender tube amps along with triangle, square, pulse, rising and falling sawtooth waveforms to recreate a “Leslie” rotating speaker swirl through to more intense swampy tremolo effects. This pedal is designed to give players easy access to classic rock ‘n’ roll, blues and surf tremolo tones with outstanding warmth and hi-fidelity. FEATURES 100% Tube Signal path Vacuum tubes and photo-resistors are utilised to create the tremolo effect. Custom photo-cells ensure absolute minimum harmonic distortion for an exceptionally pure tremolo tone. Powerful Mixed-Wave Modulator Advanced L.F.O. technology allows continuous control of many waveforms. Standard mode reproduces smoothed triangle (linear) to sine and pseudo-square with all the wave variations between to recreate a range of authentic tube amp tremolo tones. The pedal can be further configured to produce variations of rising and falling sawtooth waves, for “Les En savoir plus Collaboration commerciale.

AKAI AMX6 Mélangeur De Puissance AMP. 1 - HI/MID/LOW EQUALIZER: Powerful 15dB boost or cut allows you to tailor the sound of each individual channel so the instrument blends more naturally in the mix. The HIGH EQ is a 12 kHz shelving type to add or cut b'"'sizzleb'"'. MID has a center frequency of 1.2 kHz, approximately in the vocal range. The LOW EQ is an 80 Hz shelving type, around the kick-drum frequency. 2 - EFFECT SEND (REV/FX): Controls the level of the signal sent to the internal digital effects and the FX SEND bus. This control comes after the LEVEL control, so the signal sent to internal or external effects will also be affected by changes in the LEVEL setting. 3 - MONITOR: Controls the level of the signal sent to the MONITOR bus and MONITOR OUT jack. This control is independent of the LEVEL control and is not affected by it. This means you can create a completely separate mix for on-stage monitoring. 4 - LEVEL: Controls the level of the input signal sent to the MAIN bus. Generally used for creating the mix sent to the audience. 5 - LINE/MIC INPUTS (Channels 1-4): Use the LINE input for instruments that provide line level signals such as synthesizers or drum machines. Use the MIC input for low level signal sources such as microphones. +48V phantom power is available for use with condenser microphones. You can also use both LINE and MIC inputs simultaneously for each channel. 6 - LINE/MIC INPUTS (Channels 5-6): LINE input functions as channels 1-4. LINE/MIC input accepts both XLR and phone jacks. You can connect a stereo signal to both phone jacks (LINE and MIC/LINE) for summing to a mono signal. 7 - DIGITAL EFFECTS: A selection of 16 powerful digital reverb and delay effects to add extra ambiance to your music. A foot switch may be used to turn the digital effects on/off for dramatic sonic changes while playing, and the green indicator lights when the effects are on. 8 - PHANTOM: Turns +48V phantom power on/off for condenser microphones connected to the MIC inputs of channels 1-6. The green indicator lights when phantom power is on. 9 - FX SEND: Controls the combined level of signals sent from the FX SEND bus to an external effects processor connected to the FX SEND jack. This control has no effect on the signal level sent to the built-in digital effects. 10 - TAPE/AUX IN LEVEL: Lets you adjust the level sent to the MAIN bus from the TAPE IN/AUX IN connectors. 11 - MAIN/BRIDGED SECTION: Graphic equalizer +/-12dB 7-band graphic equalizer adjusts the EQ curve of the MAIN bus signal sent to the AMP 1 A/B speakers. Use it to compensate for poor acoustics in a hall or to prevent feedback. REV/FX: Adjusts the built-in digital effects level sent to the MAIN bus. Set to b'"'0b'"' (or use a foot switch) to turn effects off. LEVEL: Controls the output level of the MAIN bus signal sent to the MAIN OUT jack and the internal AMP 1. Peak level indicators: Provides visual indication of the signal level at the MAIN OUT jack and AMP 1 input. 12 - MONITOR SECTION: Graphic equalizer +/-12dB 7-band graphic equalizer adjusts the EQ curve of the MONITOR bus signal sent to the AMP 2 A/B speakers. Use it to compensate for poor acoustics in a hall or on stage, or to prevent feedback. REV/FX: Adjusts the built-in digital effects level sent to the MONITOR bus. Set to b'"'0b'"' (or use a foot switch) to turn effects off. LEVEL: Controls the output level of the MONITOR bus signal sent to the MONITOR OUT jack and the internal AMP 2. Peak level indicators: Provides visual indication of the signal level at the MONITOR OUT jack and AMP 2 input. 13 - MODE: Allows you to select signal routing to the internal amplifiers. MAIN TO AMP 1/MONITOR TO AMP: Gives you a 200 watts mono MAIN (audience) mix and a separate 200 watts mono MONITOR (on-stage) mix, without the need for any external amplifiers. MAIN TO AMP 1 b'&' 2: Allows you to send a 200 watts per channel, 2- or 4-speaker mono mix to the audience. You can also have a separate on-stage mix by connecting another amplifier En savoir plus Collaboration commerciale.

Objectif grand Angle ANGENIEUX f = 5.9 mm 1: 1.8 ! Monture ARRIFLEX b'"' S b'"' + b'"'Cb'"' (BOLEX H16; BEAULIEU..) avec adaptateur (English translation below) Certainement le meilleur grand angle jamais fabriqué pour le cinéma au format 16 mm ! Il permet des prises de vues extrêmement élargies et très impressionnantes ceci sans déformation ni distorsion de l'image ! Équipé d'une monture d'origine ARRIFLEX b'"' S b'"' mais livré avec un adaptateur qui permet de le fixer sur des caméras à monture b'"' C b'"' (BOLEX; BEAULIEU ou autres) Les lentilles sont claires et exemptent de moisissure et de rayure La bague des diaphragmes tourne normalement sans problème. Livré avec son pare soleil complet d'origine ANGENIEUX avec maintien périphérique (RARE) Le tout disposé dans une mallette étanche et anti chocs Veuillez noter que cet adaptateur permet aussi de fixer des objectifs ARRIFLEX avec monture b'"' B b'"' (Baïonnette) sur votre BOLEX à monture b'"' C b'"' par exemple ou autres comme BEAULIEU.. * bien entendu la caméra de présentation BOLEX ne fait pas partie de l'offre § Foreign bidders residing outside the European Union. or in the DOM-TOM Shipping is possible worldwide. But please contact me before bidding so that I can communicate the shipping cost Postage rates vary widely from region to region § ANGENIEUX wide angle lens f = 5.9 mm 1: 1.8 ! ARRIFLEX b'"'Sb'"' + b'"'Cb'"' mount (BOLEX H16; BEAULIEU..) with adapter Certainly the best wide angle ever made for cinema in 16 mm format! It allows extremely wide and very impressive shots without deformation or distortion of the image! Equipped with an original ARRIFLEX b'"'Sb'"' mount but delivered with an adapter that allows to fix it on cameras with b'"'Cb'"' mount (BOLEX; BEAULIEU or others) The lenses are clear and free of mold and scratches The diaphragm ring turns normally without problem. Delivered with its complete original ANGENIEUX sun visor with peripheral support (RARE) All arranged in a waterproof and shockproof case Please note that this adapter also allows you to attach ARRIFLEX lenses with b'"'Bb'"' mount (Bayonet) to your BOLEX with b'"'Cb'"' mount for example or others like BEAULIEU.. of course the BOLEX presentation camera is not part of the offer * * * * * * * ** Il s'agit d'une vente occasionnelle réalisée dans le cadre de la gestion de mon patrimoine personnel Il est proposé à la vente sans aucune garantie. J'ai obligation de mettre la formule b'"'PAS DE GARANTIEb'"' puisque conformément à la nouvelle législation de la Communauté européenne, les particuliers sont également tenus de fournir une garantie sur le produit vendus s'ils ne l'excluent pas au moment de la vente. Par conséquent, si vous faites une offre, cela signifie que vous excluez expressément toute forme de garantie * * * Veuillez noter qu'il s'agit de matériel b'"'vintageb'"' utilisé! En conséquence, des marques d'usage apparaissent naturellement. Témoins d'une utilisation cinématographique du siècle dernier Egalement: malgré un nettoyage méticuleux des micro-poussières peuvent subsister sur les lentilles ce qui ne dégrade aucunement la qualité de l'image * En savoir plus Collaboration commerciale.

En excellent état avec son alimentation. YAMAHA SU200 Sampling Unit The aim of the SU200 is Groove Sampling and Remixing. Variable sampling rates from 5 to 44.1 kHz offer a range of 333 to 21 seconds in stereo or mono. Samples are assigned to the pads. Looping, loop muting, slicing, filtering, distortion, effects and more are available on the fly. A ribbon controller will 'scratch' the samples like a record on a turntable. There are two real time control knobs assignable to the Loop Remix, Slice, Tech Mod (LFO), Distortion/Lo-Fi, Delay, and Filter effects. Loop Remix is a function that slices up a loop and allows you to effect the slices to create a whole new variation of that loop. A nice feature is a Resampling function which allows you to re-sample your loops or performances with any effects you may have applied. Sampled loops are also beat-matched to the tempo automatically using the Loop-Track Play feature, so you can be sure your loops will play in time with each other. Sync the SU200 to a tempo via MIDI or use the Tap Tempo key (essential for live DJ use). The SU200 also features Line and Mic inputs, MIDI IN (supports bulk dump of SU10 samples) and SmartMedia Memory Card storage. It can be battery powered and it ships with a CD to get you started sampling drum loops and synth loops. More professional features can be found in the SU700. But for DJs, the SU200 provides an affordable loop and groove performance tool to liven' up your sets! En excellent état avec son alimentation.

Antenne intérieure Antena TV HD HDTV 1080P 4K Antenne Range 960 mille Skywire Features: 1.Free Full HD channels 2.TV antenna light Ultra thin and easy to use, allows you to place it almost anywhere and does not require power. 3.960 miles long range-reception of this HDTV antenna has optimized to the most reasonable condition. 4.Transparent TV Full HD and new design 2019-the new soft material PC flame retardant respectful with the environment and ultra-thin high-performance design that provides protection against moisture and lightning to our interior HDTV antenna!   Indoor HDTV antenna features: 1) On all FM channels excellent reception / VHF / UHF. 2) It can be painted safely to combine with any domestic d; eacute; it does not affect reception or loss of signal. 3) The super soft, slim design and powerful reception capacity make this antenna the best choice for any home. Package include: 1* TV antenna 1 * receiver 1 * instruction Moyen de paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Conditions de vente Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Features: 1.Free Full HD channels 2.TV antenna light Ultra thin and easy to use, allows you to place it almost anywhere and does not require power. 3.960 miles long range-reception of this HDTV antenna has optimized to the most reasonable condition. 4.Transparent TV Full HD and new design 2019-the new soft material PC flame retardant respectful with the environment and ultra-thin high-performance design that provides protection against moisture and lightning to our interior HDTV antenna!   Indoor HDTV antenna features: 1) On all FM channels excellent reception / VHF / UHF. 2) It can be painted safely to combine with any domestic d; eacute; it does not affect reception or loss of signal. 3) The super soft, slim design and powerful reception capacity make this antenna the best choice for any home. Package include: 1* TV antenna 1 * receiver 1 * instruction PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 19-févr.-20 à 10:32:34 Paris, le vendeur a ajouté les informations suivantes:

7 Inch Professional Field Monitor - IPS LCD Panel - HDMI - KIT COMPLET !!!. État: Occasion GOOD CONDITION !! READY FOR SHOOTING International bidders are welcome.It works without problem, in good condition. It will be delievered as shown in the photos. Content KIT: - Monitor (one little scratch on screen) - AC Home Adapter - Battery with usb connection - Battery cable - HDMI Cable 1,50m - Foldable Cloth Sunshade (sturdy made) - NWNP-F960 Battery Plate 5 kinds DV Battery Plate for choice: • • NWNP-F960 (SONY “L” Type Series) - you got it !! • NWLP-E6 (Canon 5D) • NWD54s (Panasonic “D54” Series) • NWBP945 (Canon “900” Series) Main features:● 7 inch Professional HDMI Field Monitor,with metal housing ● 1280x800 resolution, support Full HD 1080P ● LED backlight ● IPS LCD Panel,178°wide view angle ● HDMI input,HDMI output optional ● YPBPR (BNC) / VIDEO(BNC) / AUDIO L & R input ● Tally input ● Aspect Ratio Guide (Full Screen,16:9,4:3) ● Check Field (Mono,Red,Green,Blue) ● Pixel To Pixel / Freeze input / Zoom ● Color Temp / RGB Adjustable ● Screen Maker / Center Maker ● PIP (Picture-in-Picture) / Image Flip http://www.youtube.com/watch?time_continue=57&v=0HY3MCvHE58&feature=emb_logo ● Advanced Function DSLR Scaling Function DSLR Ratio Adjustment allows user to scale video that does not completely fill the monitor's screen when connected via HDMI "Record" mode on certain Canon DSLR. This feature allows user to scale their DSLR video output,fill the screen,and eliminate black pillar bars with a variety of options to choose from. There has 4 kinds mode for choosing: NORMAL, 3:2, 16:9, and FULL SCREEN. Peaking Function The operator adjusts the focus control until the red outlines on the desired area are clear, indicating optimal focus. For the best results, be sure the subject is properly exposed. Enjoy taking your photos! False Color The false color feature utilizes a full spectrum of assigned color indicators,ensuring flawless shot exposure. As the camera Iris is adjusted,the subject of the images will change color basic on specific brightness values indicating optimal exposure.See included chart for color assignments. False Color Key The False Color Key is built-in when "False color" Function runs. Adjustable under luminance & over luminance warning. Clip Guides This offers adjustable upper Clip Guide Levels to accurately display overexposed images in any shooting condition.The operator simply assigns the upper IRE to their Preference and any exposure over the set IRE limit will flash in a vivid purple,indicating only the over exposed area. * Press Clip Guides one time,it will flash in a vivid purple area. * Press Clip Guides two time,it will show as a vivid purple area all the time. Tally System Front: Indicator light (green or red or yellow) will work On the edge of LCD display Rear: Indicator light (green or red or yellow) will work at the same time on the rear side. MENU SETUP * There has 5 USER MODE:USER1,USER2,USER3,USER4,USER5. * Each USER group will record all the changes as [Main Menu] showed next page. * USER can be set basic on different environments or Personal preferences,like indoor(USER1) / outdoor(USER2) / Landscape(USER3) / People(USER4) etc shootings.If environments changes,it is easy and fast to do adjustment by changing the USER group,not need to calibrate monitor again and again. * The USER Group can be stored by using the “RESTE” option in the main menu.

Hello, I am selling my Gimball, only used a couple of times for sport videos recording. Will come in the original box and the invoice. Details below: ACR The Plus is a device capable of stabilising small digital cameras and DSLRs. The stabilisers job is to make sure that the horison level is perfectly kept where it should be even during the most insane shot – it also negates unwanted round movements of the camera. An agile operator experienced in working with Steadicam or similar systems can achieve results not possible before. The versatility of this technology is limited solely by the creativity of users and the gear itself is very easy to configure. Handing over The Plus during a single, continuous shot, changing the shooting action from handheld to UAV, working in normal and inverted modes – these tasks require only a moment of preparation and open completely new horizones to open-minded filmmakers. Give it a try! The stabiliser Thanks to using a twin gyro & accelerometer system the stabilisation itself is sharp and precise while keeping the device simple to use. A powerful processor allowed us to enhance the primal functionality of the stabiliser with a set of new functions: more natural, iconic Follow Mode, larger number of saveable settings profiles, more reliable operation in demanding conditions. Three direct drive brushless motors were created to perfectly control the camera on each of the stabilised axes. The stabiliser was built according to our own solutions and technology. We used the best available materials – aircraft grade duraluminum, carbon fibres. The electronics and motors were developed from scratch to meet the requirements of our most demanding users.   The device Is powered by a single LiIon battery (included in the set) fitted inside a dedicated compartment within the carbon tube. Depending on your gear configuration it can work constantly up to two hours on a single charge. The battery charger is also included. A uniqe feature is the possibility to power up external accessories attached close to your camera straight from the main battery thanks to an auxillary power socket located at the camera shelf. Such accessories include wireless video transmission systems, follow focus systems, etc. ACR The Plus is the upgraded version of the classic BeSteady ONE – the gimble which started our journey. The first units of the predcessor were delivered to the first users around the end of 2013. We would not have made it without the support of hundreds of wonderful people who supported us via the initial KickStarter campaign. Thanks to the invaluable help from many enthusiasts we were able to revaluate, test and complete the upgrade project with success.    The heart of the BeSteady is within the mainboard. Highly modified BaseCam software, developed in direct cooperation with Alexei Moskalenko, enabled us to create a product tailored for your needs. A fast Cortex processor, vast internal memory and twin gyro & accelerometer system allows the device to easily cope with tasks such as fast running, shooting from moving vehicles and working at uncommon and extreme angles and positions. The lack of complicated configuration procedures (the so-called PID tuning) is gone with the introduction of simple, understandable sliders responsible for setting the needed parameters for every axis. The uniqe, very characteristic handheld mode, the Follow Mode, allows the operator to catch smooth scenes during continuous takes thanks to responsive and natural movement control system with a lot of precise math behind it. Moreover, the device can be controled using a dedicated analog Thumbstick or an external remote control device. The stabiliser can work in different modes thanks to the implementation of advanced control & stabilisation algorythms. The basic mode of operation is the Xtended Stabilisation – where the device maintains the exact camera position targ

Kurzweil Operating System 3.87C  (Calvin) update kit for K2000 and K2000R  Version 3.87 is the latest and the Best Operating System version for K2000 series synthesizers.   You will receive: - two brand new EPROMS - (K2000 Eng HI  and K2000 Eng LO), corresponding to the Operating System version 3.87 for K2000 K2000R (Calvin)  - integrated circuits extractor - phone or email support  Upgrading your K2000, K2000VP, or K2vx There are 2 different versions of the engine board and operating system - Calvin and Janis. If there is a "J" after the version number on the display on boot time, than you have a Janis unit, if there is no letter after the version number, you have a Calvin unit.                                                      Make sure to buy the right EPROM update kit corresponding to your board (Calvin or Janis) !!! Please note: If your K2000 system  directly from a version earlier than 2.0 (like 1.3 version) of the Kurzweil Operating System requires the additional purchase of new Setup EPROMs, which are NOT included with this operating system update kit but available on our shop.  K2000 Series - v3.87 Operating System New features and enhancements added when upgrading from version 3.54 - SCSI Speed Improvements. Now loads and saves twice as fast as previous versions. - Export to standard MIDI Type 1. Now the software can import and export both Type 0 and Type 1 MIDI files. - ISO 9660 format support. Adds ISO 9660 format support for CD's. This allows you to read CD's in the standard format. Previously we required an "image" of the hard disk format. - Supports looped WAV files, both import and export. Also correctly handles tuning of WAV and AIFF files. Saving a WAV file will now export the loop info, if any. Importing a looped WAV file will now get the loop data, if any. The software only handles one loop per sample, so the first loop found in a WAV file is used. - Now reads 2500 programs. Previously the 2000 would ignore programs containing 2500 specific parameters. Now it translates them, stripping out any KDFX or other 2500 parameters. - Improved object save and delete times. - Improved sample delete times.   New features and enhancements added when upgrading from version 3.01 or 3.18 All of the above, plus: - Eight 32-layer "drum" channels are now available. (PRAM option required). - A new option has been added for the sustain pedal (Program editor - LAYER page). When you select "On2," the sustain pedal will not catch the release of a note that is still sounding when the sustain message is received; this can be very useful in a program that uses amplitude envelopes with a long release time. - MIDI type 1 files can now be imported. - Verify option double-checks the data integrity of all your backup, copy, and save operations. - Info soft button on the Utilities page in Disk mode displays information about your disk drive(s). - Copy function now allows selection of multiple files. - You can now format multiple floppies without having to return to the initial Format command. - The K2000's SCSI subsystem has been enhanced to accept a greater variety of devices. In addition, the K2000 now supports disk drives of up to 2 Gigabytes (2048 Meg). V3.54 will work with drives larger than 2G but only the first 2 G will be utilized. (Drives larger than 1 gig will work externally, but are likely to draw too much power to be used internally. Please check our Hard Drive Compatibility List for power consumption specs. - Previous to v3.54, for the Backup and Copy functions, the combined size of both drives had to be under 1 gig unless PRAM was installed. This limitation no longer exists. - Compatibility with the PC Exchange program has been improved.   New features and enhancements added when upgrading from version 1 or 2 All of the above, plus: Version 3 operating system software for the K2000 offers majo

KINOPTIK 25mm f 2 APOCHROMAT ARRIFLEX S mount                    but possibility to adapt several different mounts ! RARE §                                 (traduction en français ci-dessous)     * An apochromatic or apochromat lens is an improved version of the achromatic doublet  to ensure the correction of chromatic and spherical aberrations.    The achromat is limited to the correction of the focal distances of two beams of wavelengths  different.  Apochromat allows you to correct focal lengths for three different wavelengths.  The residual color dispersion is less than that produced by an aperture achromat  and equivalent focal length.  Apochromat also corrects spherical aberrations  on two wavelengths, against one wavelength with achromat.  The apochromat is an assembly of 3 lenses allowing to  correct the trajectories of 3 beams of different wavelengths  And also the variation of the focal length as a function of the wavelength in the  visible spectrum  The making of an apochromat  requires exceptional optical glasses of a particular construction to achieve this result.  Crown & fluorite glasses are generally used.  (source Wikipedia)    This is why these lens are very sought after and used by filmmakers and professional photographers!   It is: Very good cosmetic condition The adjustment rings rotate normally Clear lenses without mold and without "mist"   Protective caps front and rear   Original mount: ARRIFLEX S Possible adaptation on: BOLEX H16 / BEAULIEU or others with "C mount" adapter (photo 7) This lens also allows digital photography and filming! The results are "breathtaking" in quality! on these two devices: SONY Alpha NEX with "E mount" adapter (photo 8) LUMIX GH / BLACKMAGIC with "MFT 4/3" adapter (photo 9) fixing also possible on: LEICA M8 (photo 10)   (NOT tested! I don't have this type of device please make sure of its possible use before making your ordered) I can equip this lens with one of these adapter Please tell me when ordering the adapter that interests you: "C mount" or "E mount" or "MFT 4/3" or "LEICA M" Only one of these adapters will be delivered and fixed on the lens at no extra cost Careful assembly carried out in my workshop! **Due to epidemic consequences, shipping times may be extended  by a few days  *** ** The foreign buyer (outside the European Union) contacts me before bidding.  To determine the shipping costs (Large variation  depending on the country) ** ** Please read the general sales instructions your purchase implies acceptance **              KINOPTIK 25mm f 2 APOCHROMAT                  équipé d'une monture ARRIFLEX S           mais possibilité d'adapter plusieurs montures différentes                (démarche unique et rare profitez en) * Un objectif apochromatique ou apochromat est une version améliorée du doublet achromatique  pour assurer la correction des aberrations chromatique et sphérique.     L'achromat se limite à la correction des distances focales de deux faisceaux de longueurs d'onde   différentes.   L'apochromat permet de corriger les distances focales de trois longueurs d'onde différentes.   La dispersion résiduelle des couleurs est moindre que celle produite par un achromat, à ouverture   et distance focale équivalentes.  L'apochromat permet aussi de corriger les aberrations sphériques   sur deux longueurs d'onde, contre une longueur d'onde avec l'achromat.   L'apochromat est un assemblage de 3 lentilles permettant de  corriger les trajectoires de 3 faisceaux de longueurs d'onde différentes   Et aussi la variation de la distance focale en fonction de la longueur d'onde dans le  spectre du visible   La fab

Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303. As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds, without diluting the essential TB-303 character. MODS INCLUDE: VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob. Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods. VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob. VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff cont

SONY DSC-F707 + ensemble de filtres pour photos infrarouge Le F707 permet de prendre des photographies infrarouge grâce à sa possibilité de désactiver le filtre anti-IR intégré lorsqu'il est en mode NIGHT-SHOT. La série de filtres devant l'objectif bloque l'ensemble du spectre visible et ne laisse passer que les rayons infrarouge. Le rendu typique de ces images donne une grande richesse dans les ombres, et un aspect irréel aux paysages. Voir photo d'exemple prise avec l'appareil. Résolution: 5 mégapixels Les 3 filtres fournis sont: - Filtre IR 720 - Filtre polarisant circulaire - Filtre ND variable 2-400 L'appareil est en excellent état. Il est livré avec: - Chargeur SONY - Carte Memorystick 64 méga - Batterie d'origine qui tient encore correctement la charge - Batterie compatible neuve - Sac de transport Livraison monde entier - emballage soigné --- SONY DSC-F707 + set of filters for infrared photos The F707 allows you to take infrared photographs thanks to its possibility to deactivate the integrated anti-IR filter when in NIGHT-SHOT mode. The series of filters in front of the lens blocks the entire visible spectrum and allows only infrared rays to pass. The typical rendering of these images gives great richness in the shadows, and an unreal aspect to the landscapes. See example photo taken with the camera. Resolution: 5 megapixels The 3 filters provided are: - IR 720 filter - Circular polarizing filter - Variable ND filter 2-400 The device is in excellent condition. It comes with: - SONY charger - Memorystick 64 mega card - Original battery which still holds the charge correctly - New compatible battery - Transport bag Worldwide delivery - careful packaging

The Cara preamplifier is prefect for audiophiles looking for a quiet, fast pre-amplifier with multiple inputs and 4 channel outputs. This allows a biamped system or a speaker/sub combination to be control by the Cara Pre-amplifier. With a balance input and balanced output line drivers, the noise rejection on the inputs and outputs are very high and perfect for low noise systems. Built in a steel chassis for EMI/RFI protection, the Cara pre-amplifier will bring music details out, to deliver a greater musical experience. Pre-amplification is sometimes necessary when there is more than one source and when more than 1 output is necessary. Analog volume controls are much nicer than digital attenuation, with analog giving more details and longer decay. High attenuation capability allows the handling of high output devices like DAC and low output devices phono pre-amplifiers with moving coil cartridge. A low noise floor helps provide great music insight and better presentation. The Cara Pre-amplifier has dual outputs with independent relative volume setting, 4 inputs to select from, an analog volume control that goes from -99db to +15db in 0.5 db steps with a 10V operating headroom with a very low noise floor. This makes Cara an exceptional pre-amplifier with wide operational capability. Play your music with any source component and still get the best out of your whole stereo system. Features of the Cara preamplifier: - 2 pairs of outputs (4 channels) - Each output channel can be set to independent relative volume levels - Remote Control with mute, on/off for remote trigger (12V, 20mA), - Cardas XLR inputs, gold-plated chassis with rhodium plate metal body, teflon insulation and silver pins - External power supply with double fused inlet - Large LED display with -99 to +15db control in 0.5 db steps - Optional Isoacoustics GAIA III footers - Optional Synergistic fuses (2 required) Specifications of the Cara preamplifier - Input Voltage: +/- 10V - Output Voltage: +/- 12V - Frequency Response: 8Hz to 200kHz 0.1dB - S/N: 110dB - THD: 0.002% - Inputs: 4 inputs with individual gain presets - Outputs: 2 outputs with individual level presets - Volume range: -99db to + 15dB (0 to +115) - Input Preset Range: +/- 12dB - Output Preset Range: 0 to 115dB - Preset Max volume level: 0 to 115dB - Preset Min Volume level: 0 to 115 dB - Display Brightness settings: 1 to 9, and off - Display delay dim time range: 5 sec to 25 sec - Permanently saved settings - External Power Supply with 110V/240V - Remote Control - Display Size: 1.25" high x 6" wide, blue LED dot matrix - Remote Trigger: 12V

Features: This great little adaptor allows you to use your favourite headphones or earphones with your mobile phone Simply plug in the cable into your mobile's Mini USB port and then connect your headphones and enjoy high quality sound and listen to your favourite MP3's. Use this mic adapter to connect any external 3.5mm microphone to your HERO3 camera Mini USB to 3.5mm Headphone Jack for Mobile Phone Simple Plug and Play Allows you to use any headphones with your mobile phone Color: Black Length: approx. 11.9cm/ 4.69" Package include: 1 x Micro USB to 3.5mm Cable Only

Rendez vos enregistrements professionnels totalement professionnels avec l'enregistreur MiniDisc MZ-B10. Il vous permet de réaliser des enregistrements numériques avec un accès rapide, une édition facile et une excellente qualité. Le MZ-B10, petit et léger, enregistre grâce à son micro plat de haute qualité. MDLP vous permet d'allonger la durée d'enregistrement d'un MiniDisc vierge à quatre fois sa durée initiale. Le MZ-B10 est donc idéal pour les conférences et les séminaires. De plus, il dispose d'un enregistrement longue durée, de deux haut-parleurs et d'une plage de temps automatique, ce qui en fait la solution professionnelle idéale pour les cadres occupés.Grand écran LCD affiche le temps écoulé et le temps restant.Le contrôle numérique de la hauteur permet une lecture lente ou rapide sans changement de hauteur (utile pour, par exemple, l'apprentissage d'une langue ou la relecture d'une conférence)Automatic Time Track (insère automatiquement le repère de piste à intervalles réguliers). Microphone mono intégré Voice Mirror (le voyant clignote lorsqu'un signal vocal est émis, garantissant le fonctionnement du microphone et de l'enregistreur). CARACTÉRISTIQUES ET POINTS FORTS Jusqu'à 24 heures d'enregistrement / 45 heures de lecture avec deux piles  alcalines AA Deux haut-parleurs pour un son puissant Compteur de minuterie d'enregistrement restant Piste de temps automatique Fonction de lecture du son par les haut-parleurs Avec les accessoires suivants: - Lecteur enregistreur  SONY MINI DISC RECOREDER MZ B10 - 2 piles neuves Sony rechargeables - 1 Chargeur de piles rechargeable avec connectique USB - 2 Mini Disc vierges  MD  - 2 Mini Disc enregistrés  MD   Paiement par PayPal uniquement sous 3 jours, s'il vous plait  ---------------------------------------------------------------------------------------------------------------------------  Make your business recordings totally professional with the MZ-B10 MiniDisc recorder. It lets you make digital recordings that give you fast access, easy editing and excellent quality. The tiny, lightweight MZ-B10 records through its high-quality flat mic. MDLP lets you extend the recording time of a blank MiniDisc to four times its original length so the MZ-B10 is ideal for conferences or seminars. Plus, it features long life recording, twin speakers and automatic time track that make it the ultimate business solution for busy executives.Digital height control allows slow or fast playback without changing pitch (useful for example, learning a language or replaying a conference). Automatic Time Track (automatically inserts the track mark at regular intervals). Integrated mono microphone Voice Mirror (the light flashes when a voice signal is emitted, ensuring microphone and recorder operation). Up to 24 hour recording time / 45 hours playback time with two AA alkalines Twin speakers for powerful playback sound Remaining recording timer counter Automatic time track Playback sound function through the speakers With the following accessories: - SONY MINI DISC RECOREDER MZ B10 record player - 2 new Sony rechargeable batteries - 1 Rechargeable battery charger with USB connection - 2 blank Mini Discs MD (see photos) - 2 Mini Discs recorded MD Payment by PayPal only within 3 days, please ModelBrandSONYModelMZ-B10DetailsRecording FormatATRACRecording MediaMini DiscSpeaker2x 70mW Speaker Built-inBattery2x AA-size batteries requiredBattery LifeRecording 24 Hours, Playback 40 HoursFeaturesFeaturesMDLP Support (but not NetMD)  Large LCD shows both elapsed and remaining time.  ATRAC DSP Type-S.  Button layout resembling portable tape recorders, to ease use by first-timers.  Digital pitch control allows slow or fast playback without change of pitch (useful for e.g. language learning or reviewing a lecture).  Twin Sp

DATAVIDEO VP-332 DV Repeater One Input to 5 Output 6 port IEEE1394 Distribution Amplifier Occasion Features • DV Hub with 6 x 6 Pin DV (IEEE1394) Ports • Allows Multiple Devices To Be Connected To One Port • Allows One DV Device To Feed Up To Five Outputs • Boosts DV Signal For Extended Cable Runs (200m Max) • Up to 400 Mbps Data Rate • Fully Interoperable with FireWire™ and iLink™ Implementation of IEEE1394 Standard • Supports Self-Powered or Cable-Powered mode • Supports Hot Plug and Play Functions • Supports asynchronous and isochronous data transfers • Supports PC Windows 98/SE/ME/XP/2000 system and Mac OS 8.6 or above Installation 1. Plug the DC power adapter into the power jack of the DV Repeater 2. Connect the IEEE1394 host port to any of the DV Repeater ports 3. Install the IEEE1394 device driver from Windows 98/SE or above 4. Connect your IEEE1394 devices to the DV Repeater Note: If a single port drops out, the LED indicator of that port will be off Specifications • Bi-directional IEEE1394 distribution amplifier • Provides six IEEE1394 ports at 100/200/400 Mbps • Compliant with IEEE1394, 1394a standard • Supports up to 63 devices cascaded • Over-current detection and protection of each port • Bus-powered LED indicators • External Power Supply 12VDC, 12 Watts (included) • Size: WxDxH 10x5x2 cm (approx) Attention je ne fournie pas l’adaptateur secteur, seulement le boitier VP 332 DV Repeater

Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303.  As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds,  without diluting the essential TB-303 character.  MODS INCLUDE:  VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob.  Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods.  VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob.  VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff con

************Comme neuf sans l'embalage d'origine (jamais servi)********* 40W A-TION SOUND BAR Description Feature: 1. Four speakers for high performance multi-dimensional sound and an unparalleled cinematic deep bass surround sound, let you enjoy high-quality music. 2. Built-in Bluetooth allows you to wirelessly stream audio from your mobile devices. Lose the wires and listen to your music with a tap of a finger from anywhere in the room. 3. Built-in rechargeable 2000mAh battery provides up to 4 hours of playtime.  4. Bluetooth 5.0 specifications, support A2DP, AVRCP, HSP and HF format. 5. Powered by built-in rechargeable battery (charged by USB cord included). 6.Watching TV at home is like watching a movie at a movie theater. It gives you a theater level sound experience. 7.Support Bluetooth connection, fully compatible with most kinds of Bluetooth devices, wireless playing, do follow your heart. 8.Built-in DSP sound processor with clear sound and no noise. 9.Simple connection, easy to operate. 10.Watching TV at home is like watching a movie at a movie theater. It gives you a theater level sound experience. 11.Support remote control operation, configure RCA IN port input and TV compatibility. 12.TWS technology allows you to pair two bluetooth speakers by wireless Bluetooth, then audio can be played in sync on two speakers (as left/right channel outputs respectively), for true double enhanced stereo sound. The 4*10W drivers enhance the bass and provide more louder sound, which will crash the party or dancing 13.Hands-free Call，With stable bluetooth connect, nothing will get in the way between you and your phone call. Hands-free calling havenever been easier Specification: Bluetooth version: V5.0 Speaker power: 10W × 4 Color: Black Use transmission power: 1.49mW Transmission frequency: 2.48GHz Transmission distance: 8-10 meters  Music playback time: about 2.5 hours  Charging time: 2-3 hours  Standby time: 240 hours Support formats: A2DP, AVRCP, HSP and HF Battery: 18650, 3.7V / 2000mA SNR: -80db Frequency response: 20HZ-20KHZ Charging voltage: DC 5V / 1A-2A Charging socket: micro USB Support TF card audio input Support 3.5mm audio input support RCA IN port input  support infrared ray receiver support ture wireless stereo support hands-free calling support FM radio Size: 550*63*63mm Weight:1108 g Package Included: 1 x Speaker 1 x Charging Cable 1 x Remote Control 2 x stand