Amplifier sono channels

Bonjour Amplificateur PLM20000q de 2013 en parfait état, il a été en sus vérifié et nettoyé par le fabricant. Il est comme neuf ! Vendu complet en carton avec Bracklets arrière, et accessoires En sus offert le patch (complet module, réseau et puisance) tutoriel lake, réseau dante, support, service etc. --------- Amplifier PLM20000q since 2013 in very good condition. In more amplifiers were tested and checked by the constructor. As new. Sell complete with box,Bracklets, and hardware In more i offer Patch (complete) time, support, tutoriel lake, dante, preset, etc. ------ 4x 4500W under 2 ohms minimum 2 inputs / AES input / Dante network Lake processing 2U / 18Kg Patch give: 2 analog input and links Dante Four speakons 4 pts for 4 speakers (1+1-) or 2 bi amp with 1+1- 2+2- 1 speakon 8 pts for quad amplification (or tri) Alu 3mm reinforce flight case in more (very good quality patch) -------- 1 item  : 3850 eus 2 items: 7600 eus 3 items: 11300 eus 4 items: 14500 eus Need more, price down ! note I give you too time, advise and what you need to use good the amplifier with your system. Many  Tutorials and website support Don't hesitate to contact me, i can help you for informations, preset, etc. jeremie

Amplifier Av Surround Receiver 7.1 MARANTZ ZR6001 (very good condition). Très rare ampli home cinéma haut de gamme Très bon état de fonctionnement ! Très bon état esthétique ! Télécommande fournie ! 14kg de technologie ! Produit très haut de gamme ! Etage de puissance et pré-amplification Puissance de sortie: 7 x 95 W RMS Impédance nominale: 8 ohms Décodeurs intégrés Dolby Digital EX, DTS ES (Matrix et Discrete), DTS Neo:6 (Cinema et Music), DTS 96/24, DPLI, DPL II (Game Movie et Music), DPLIIx, HDCD Autres effets Surround CS 6.1 (CS II Cinema, Music Mono), stéréo multicanale, Movie, Hall, Matrix, Stadium, Virtual Conversion Numérique / Analogique (N/A) et A/N Crystal: 24 Bits 192 kHz via CS42428 Traitement numérique (DSP) et type: 32 Bits via CS49400 Réponse en fréquence numérique (96kHz PCM): 8 Hz - 100 kHz (large bande) Réponse en fréquence analogique (/- 3dB): 8 Hz - 100 kHz (large bande) Rapport signal bruit: 105 dB Distorsion Harmonique Totale: 0,08% Connectique Entrées / Sorties Audio / Vidéo Entrées audio analogiques: 7 (TV, VCR1, VCR2, CD, CD-R/MD, cassette, Aux.) Entrées audio numériques: 4 (2 optiques 2 coaxiales) Entrées audio vidéo: 4 (toutes doublées S-Vidéo) Entrées composantes: 2 x YUV Entrées en façade: 1 x A/V doublée S-Vidéo Entrées analogiques: 1 x 7.1 canaux Entrée D-Bus multiroom, multi RC (flasher) Sorties audio analogiques: 4 (VCR1/ VCR2 CD-R/MD, cassette) 1 sortie auxiliaire PLC Sorties audio numériques: 2 (1 optique 1 coaxiale) Sorties audio vidéo: 2 (toutes doublées S-vidéo) Sorties Moniteur: 3 (1 x CVBS 1 x S-vidéo 1 x Y, Cb/Pb, Cr/Pr) Sorties Pré-out 7.1 Sorties D-Bus multi. alimentation commutée, multroom radio commandé Sorties Ir emitters x4 Bornes HP / possibilité fiches banane: 7 paires à vis section standard RS232C bi-directionnelle, mémoire ligne interne Fonctions de confort Télécommande RC 5500 SR (préprogrammée) Tuner RDS AM / FM (PS, PTY, RT): 50 Présélections Menu d'installation: OSD avec réglage retard enceintes UpConversion vidéo CVBS composite vers S-Vidéo et YUV composantes Composants audiophiles haute qualité Fonction Lip Sync Réglage de la synchronisation du retard acoustique avec circuits vidéo internes (200 msec/ch.) Fréquence de coupure basse réglable: 40 Hz, 60, 80, 100, 120 Hz Technologie CPL (Control Power Line) Dimensions (L x H x P): 440 x 162 x 463 mm - Poids 14 kg. Very rare high-end home cinema amplifier Very good working condition! Very good aesthetic condition! Remote control included! 14kg of technology! Power stage and pre-amplification Output power: 7 x 95 W RMS Nominal Impedance: 8 ohms Integrated decoders Dolby Digital EX, DTS ES (Matrix and Discrete), DTS Neo: 6 (Cinema and Music), DTS 96/24, DPLI, DPL II (Game Movie and Music), DPLIIx, HDCD Other surround effects CS 6.1 (CS II Cinema, Music Mono), multichannel stereo, Movie, Hall, Matrix, Stadium, Virtual Digital / Analogue (D / A) and A / D Crystal Conversion: 24 Bits 192 kHz via CS42428 Digital processing (DSP) and type: 32 Bits via CS49400 Digital frequency response (96kHz PCM): 8Hz - 100kHz (wideband) Analog frequency response (/ - 3dB): 8 Hz - 100 kHz (wideband) Signal-to-noise ratio: 105 dB Total Harmonic Distortion: 0.08% Connectivity Audio / Video Inputs / Outputs Analog audio inputs: 7 (TV, VCR1, VCR2, CD, CD-R / MD, cassette, Aux.) Digital audio inputs: 4 (2 optical 2 coaxial) Audio video inputs: 4 (all dubbed S-Video) Component inputs: 2 x YUV Front inputs: 1 x A / V doubled S-Video Analog inputs: 1 x 7.1 channels Multiroom D-Bus input, multi RC (flasher) Analog audio outputs: 4 (VCR1 / VCR2 CD-R / MD, cassette) 1 PLC auxiliary output Digital audio outputs: 2 (1 optical 1 coaxial) Audio video outputs: 2 (all S-video dubbed) Monitor outputs: 3 (1 x CVBS 1 x S-video 1 x Y, Cb / Pb, Cr / Pr) Pre-out 7.1 Multi D-Bus outputs. switched power, radio controlled multroom Ir emitters outputs x4 Loudspeaker terminals / possibility of banana plugs: 7 pairs of screws, standard section Bi-directional RS232C, internal line memory Comfort functions RC 5500 SR remote control (pre-programmed) RDS AM / FM tuner (PS, PTY, RT): 50 Presets Setup menu: OSD with speaker delay adjustment UpConversion of composite CVBS video to S-Video and component YUV High quality audiophile components Lip Sync function Adjustment of the synchronization of the acoustic delay with internal video circuits (200 msec / ch.) Adjustable low cutoff frequency: 40 Hz, 60, 80, 100, 120 Hz Powerline technology (Control Power Line) Dimensions (W x H x D): 440 x 162 x 463 mm - Weight 14 kg

Vend Sono MIPRO - MA 707 - Wireless Amplifier Prix à débattre

Table amplifiée Yamaha EMX 860st x 1 = 247E (prix mini constaté 300E) Avec un ampli de 300w elle fait parfaitement le travail: amplifier un petit groupe en cabaret, une fête de famille ou mariage, karaoké... Elle est pratique, avec une voie d'ampli (3 x 200W). Pas mal de choses utiles et bien vues: alim phantom, 8 voies XLR dont deux passant en ligne + stéréo, 2 équalos 7 bandes sur le master et aussi sur la voie "retours", petite réverb basique hall/plate/room suffisante, limiteur, et surtout: elle est suffisamment simple pour des utilisateurs n'y connaissant rien en sono avec quelques explications. Les +: fiabilité, simplicité, prix et qualité sonore correcte Les -: en cherchant bien: poids, connectique HP toujours en jack:-(Etat correct, fonctionnes parfaitement. -Enceinte façade de sono passive Power Acoustics EP 115 V x 2 = 238E (prix mini constaté en rupture de stock 278E) Modèle EP-115 v POWER Handling 250w RMC. Des modèles taillés pour la route ! Vendu sans pied (36E la paire). Caractéristiques - Enceinte 2 Voies - Forme Trapézoïdale - Revêtement vinyl Granit noir - Boomer: 38cm - Tweeter compression - Puissance: 450 W - Sensibilité: 96 dB 1 W/1 M - Bande Passante: 65 à 20 KHz - Sortie Speakon - Impédance: 8 Ohms - Dimensions: 685 X 460 X 340(HxLxP) - Poids: 21Kgs État correct, fonctionnes parfaitement -Petit retour de scène (passifs) maison, jack et Speakon x 2 = 50E avec un boomer de 19cm État correct, fonctionnes parfaitement (Soit une économie de 38 euros sur la sono complète)

Cause double emploi, je vends une sono portable POSS PSPARTY120 à l'état neuf (sous garantie jusqu'au 08/10/2023) Sono de qualité et idéale pour animer vos fêtes familiales, vous entraîner sur des chansons en karaoké ou amplifier votre guitare. Principales caractéristiques : - Puissance 120 W RMS / 1200 W PMPO (données fabricant), - 2 boomers et 2 tweeters, - Affichage à LEDS couleur de la face avant (7 effets différents) - Fonctionnement en mode Bluetooth, Sur le dessus : - Afficheur écran LCD, - Mode menu (entrées radio FM, port USB, Bluetooth et ligne) - TWS (pour le couplage avec une 2ème enceinte en mode Bluetooth) - Priorité micro (compression de la musique) - Volume général de l'enceinte. A l'arrière de l'enceinte : - Réglage des basses et des aigus de l'enceinte, - Entrée et volume du micro (jack 6,3 mm) - Volume de l'écho (pour chanter en karaoké avec le micro) - Entrée et volume de la guitare (jack 6,3 mm) - Entrée ligne auxiliaire (jack 3,2 mm) - Interrupteur I/O de la mise en service de l'enceinte. - Alimentation de la batterie interne (autonomie de 8 à 16h selon la puissance demandée), - Poignée de transport et poids léger de 6,5 kg. Livrée complète dans son emballage d'origine avec 1 micro fil, câble de charge secteur 230 V pour la batterie interne et manuel d'utilisation en Français. Prix neuf constaté : 129,90 €. A réceptionner uniquement sur place. Instruments de musique à vendre à Villiers-Saint-Fréderic (78640)

urgent vends sono avec: -2 haut parleur marque pioneer 330W (3 voix coaxial 16*24cm) -1 ampli marque audio system ADS 8002 (160+160W) -1 ampli marque GTO 400W (GBL GTO 2000 2/1 channel power amplifier) vendu 700 euros à debattre cause séparation - 08

Sono & Matériel de Studio Sono & Matériel de studio Code EAN: 6419948971732 En-tête / Fabricant: Générique Origine_import: All-in-one Titre: Aroma AG-03M 5W Guitar Bass Amp Amplifier Recorder USB Rechargeable Speaker

Sono & Matériel de Studio Sono & Matériel de studio Code EAN: 0871015005379 En-tête / Fabricant: Crown Titre: Crown XTI2002 Professional Amplifier Origine_import: hightech_minimaliste

Sono & Matériel de Studio Sono & Matériel de studio Code EAN: 0747705204424 En-tête / Fabricant: Gemini Titre: Gemini XGA-4000 Power Amplifier Origine_import: hightech_minimaliste

.body { background: url("http://www.global-audio-store.fr/template/img/background-.jpg") repeat-y fixed top transparent; color: #575757; font-family: Calibri,tahoma; font-size: 12px; line-height: 1.5; padding-top:20px; padding-bottom:40px; }.clear{ clear:both; } img{ border:none; } #header{ margin-left:auto; margin-right:auto; width: 1024px; } #contenu-header{ background: url("http://www.global-audio-store.fr/template/img/Header-.png") no-repeat scroll center top transparent; height: 630px; margin-left:auto; margin-right:auto; width: 1024px; } #contenu{ margin-left:auto; margin-right:auto; width:953px; background-color:#F5F5F5; border-bottom-left-radius: 6px; border-bottom-right-radius: 6px; border-top-left-radius: 6px; border-top-right-radius: 6px; box-shadow: 0 2px 14px 3px black; padding-bottom: 20px; padding-left: 6px; padding-right: 0px; padding-top: 20px; margin-top:-44px; } #drapeau{ padding-left:43px; padding-top:24px; color: #BDBDBD; } #drapeau a img{ border: medium none; opacity: 0.5; outline: medium none; text-decoration: none; margin-left:2px; transition-property: opacity, box-shadow; transition-duration: 0.1s; } #drapeau a:hover img { border: medium none; opacity: 1; outline: medium none; text-decoration: none; box-shadow:0px 0px 10px 2px #34ABEB; } #logo{ padding-left:401px; padding-top:38px; } #logo img{ visibility:hidden; } #logo a{ padding-top: 166px; } #pb-right-column{ float: left; margin-left: 20px; width:28%; } #pb-right-column img, #manufacturer img{ background: none repeat scroll 0 0 #FFFFFF; border: 2px solid #FFFFFF; box-shadow: 0 0 15px -8px black; cursor: pointer; float: left; margin: 10px 0 0 6px; } #pb-left-column{ float: left; margin-left:20px; width:65% } #pb-left-column h1{ font: 22px/24px normal georgia; overflow: hidden; text-align: left; color: #34ABEB; width: 98%; } #menu { height: 50px; margin-left: auto; margin-right: auto; position: relative; text-align: center; top: -100px; width: 1024px; z-index: 1; }.dock-container { position: absolute; height: 50px; background: url(images/dock-bg2.gif); } a.dock-item { display: block; width: 90px; color: #34ABEB; position: absolute; top: 0px; text-align: center; text-decoration: none; font: bold 12px Arial, Helvetica, sans-serif; transition-property: width; transition-duration: 0.2s; } a.dock-item:hover { z-index:1; width: 120px; }.dock-item img { border: none; margin: 5px 10px 0px; width: 100%; }.dock-item span { display: none; padding-left: 20px; } #messageTopChange{ position:relative; top:144px; margin-left: 276px; color: #E1E2E7; font-family: calisto-MT; text-align: center; width: 470px; font-size: 42px; } #our_price_display { font-size: 32px; /*float: right; position:absolute; margin-left: 250px;*/ color: #34ABEB; } #allemand,#italien,#anglais,#espagnol{ display:none; } #messageTopChange{ color: #E1E2E7; font-family: calisto-MT; font-size: 42px; position: relative; text-align: center; width: 470px; } "); document.write(" "); --> function fr(){ document.getElementById("francais").style.display = "block"; document.getElementById("anglais").style.display = "none"; document.getElementById("espagnol").style.display = "none"; document.getElementById("allemand").style.display = "none"; document.getElementById("italien").style.display = "none"; document.getElementById("dpfrimg").style.opacity = "1"; document.getElementById("dpenimg").style.opacity = "0.5"; document.getElementById("dpesimg").style.opacity = "0.5"; document.getElementById("dpdeimg").style.opacity = "0.5"; document.getElementById("dpitimg").style.opacity = "0.5"; document.getElementById("langue_fr").style.display = "block"; document.getElementById("langue_en").style.display = "none"; document.getElementById("langue_es").style.display = "none"; document.getElementById("langue_de").style.display = "none"; document.getElementById("langue_it").style.display = "none"; jQuery('.menuFR').css('display','block'); jQuery('.menuEN').css('display','none'); jQuery('.menuES').css('display','none'); jQuery('.menuDE').css('display','none'); jQuery('.menuIT').css('display','none'); jQuery('.mfr').css('display','block'); jQuery('.men').css('display','none'); jQuery('.mes').css('display','none'); jQuery('.mde').css('display','none'); jQuery('.mit').css('display','none'); } function en(){ document.getElementById("francais").style.display = "none"; document.getElementById("anglais").style.display = "block"; document.getElementById("espagnol").style.display = "none"; document.getElementById("allemand").style.display = "none"; document.getElementById("italien").style.display = "none"; document.getElementById("dpfrimg").style.opacity = "0.5"; document.getElementById("dpenimg").style.opacity = "1"; document.getElementById("dpesimg").style.opacity = "0.5"; document.getElementById("dpdeimg").style.opacity = "0.5"; document.getElementById("dpitimg").style.opacity = "0.5"; document.getElementById("langue_fr").style.display = "none"; document.getElementById("langue_en").style.display = "block"; document.getElementById("langue_es").style.display = "none"; document.getElementById("langue_de").style.display = "none"; document.getElementById("langue_it").style.display = "none"; jQuery('.menuFR').css('display','none'); jQuery('.menuEN').css('display','block'); jQuery('.menuES').css('display','none'); jQuery('.menuDE').css('display','none'); jQuery('.menuIT').css('display','none'); jQuery('.mfr').css('display','none'); jQuery('.men').css('display','block'); jQuery('.mes').css('display','none'); jQuery('.mde').css('display','none'); jQuery('.mit').css('display','none'); } function de(){ document.getElementById("francais").style.display = "none"; document.getElementById("anglais").style.display = "none"; document.getElementById("espagnol").style.display = "none"; document.getElementById("allemand").style.display = "block"; document.getElementById("italien").style.display = "none"; document.getElementById("dpfrimg").style.opacity = "0.5"; document.getElementById("dpenimg").style.opacity = "0.5"; document.getElementById("dpesimg").style.opacity = "0.5"; document.getElementById("dpdeimg").style.opacity = "1"; document.getElementById("dpitimg").style.opacity = "0.5"; document.getElementById("langue_fr").style.display = "none"; document.getElementById("langue_en").style.display = "none"; document.getElementById("langue_es").style.display = "none"; document.getElementById("langue_de").style.display = "block"; document.getElementById("langue_it").style.display = "none"; jQuery('.menuFR').css('display','none'); jQuery('.menuEN').css('display','none'); jQuery('.menuES').css('display','none'); jQuery('.menuDE').css('display','block'); jQuery('.menuIT').css('display','none'); jQuery('.mfr').css('display','none'); jQuery('.men').css('display','none'); jQuery('.mes').css('display','none'); jQuery('.mde').css('display','block'); jQuery('.mit').css('display','none'); } function es(){ document.getElementById("francais").style.display = "none"; document.getElementById("anglais").style.display = "none"; document.getElementById("espagnol").style.display = "block"; document.getElementById("allemand").style.display = "none"; document.getElementById("italien").style.display = "none"; document.getElementById("dpfrimg").style.opacity = "0.5"; document.getElementById("dpenimg").style.opacity = "0.5"; document.getElementById("dpesimg").style.opacity = "1"; document.getElementById("dpdeimg").style.opacity = "0.5"; document.getElementById("dpitimg").style.opacity = "0.5"; document.getElementById("langue_fr").style.display = "none"; document.getElementById("langue_en").style.display = "none"; document.getElementById("langue_es").style.display = "block"; document.getElementById("langue_de").style.display = "none"; document.getElementById("langue_it").style.display = "none"; jQuery('.menuFR').css('display','none'); jQuery('.menuEN').css('display','none'); jQuery('.menuES').css('display','block'); jQuery('.menuDE').css('display','none'); jQuery('.menuIT').css('display','none'); jQuery('.mfr').css('display','none'); jQuery('.men').css('display','none'); jQuery('.mes').css('display','block'); jQuery('.mde').css('display','none'); jQuery('.mit').css('display','none'); } function it(){ document.getElementById("francais").style.display = "none"; document.getElementById("anglais").style.display = "none"; document.getElementById("espagnol").style.display = "none"; document.getElementById("allemand").style.display = "none"; document.getElementById("italien").style.display = "block"; document.getElementById("dpfrimg").style.opacity = "0.5"; document.getElementById("dpenimg").style.opacity = "0.5"; document.getElementById("dpesimg").style.opacity = "0.5"; document.getElementById("dpdeimg").style.opacity = "0.5"; document.getElementById("dpitimg").style.opacity = "1"; document.getElementById("langue_fr").style.display = "none"; document.getElementById("langue_en").style.display = "none"; document.getElementById("langue_es").style.display = "none"; document.getElementById("langue_de").style.display = "none"; document.getElementById("langue_it").style.display = "block"; jQuery('.menuFR').css('display','none'); jQuery('.menuEN').css('display','none'); jQuery('.menuES').css('display','none'); jQuery('.menuDE').css('display','none'); jQuery('.menuIT').css('display','block'); jQuery('.mfr').css('display','none'); jQuery('.men').css('display','none'); jQuery('.mes').css('display','none'); jQuery('.mde').css('display','none'); jQuery('.mit').css('display','block'); } Change your language: Change your language: Change your language: Change your language: Change your language: Global-Audio-Store $(document).ready(function(){ //gestion JS du libeler du menu if (navigator.appName=="Microsoft Internet Explorer"){ topValeur = '162px'; topValeurBis = '156px'; jQuery('#messageTopChange').css('top',topValeurBis); } else{ topValeur = '150px'; topValeurBis = '144px'; } jQuery('#menu a').mouseover(function(){ var nom = jQuery(this).text(); jQuery('#messageTopChange').text(nom); jQuery('#messageTopChange').css('font-size','35px'); jQuery('#messageTopChange').css('top',topValeur); }); jQuery('#menu a').mouseout(function(){ jQuery('#messageTopChange').text('Global-Audio-Store'); jQuery('#messageTopChange').css('font-size','42px'); jQuery('#messageTopChange').css('top',topValeurBis); }); }); STUDIO - HOME STUDIO INSTRUMENT INFORMATIQUE MUSICALE LOGICIEL MAO ESPACE DJ ESPACE GUITARE ESPACE FLIGHT-CASE TRAITEMENT ACOUSTIQUE SONORISATION CÂBLES AUDIO ACCESSOIRES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES LD Systems - STINGER MIX 6 A G2 - Enceinte de Sono active 6,5" avec Console de Mixage 4 Canaux intégré Référence: LDMIX6AG2 248,00 € Disponibilité:    Disponible en stock fournisseur Livraison:   Sous 4 jours ouvrés Garantie: 2 ans pièces & main-d'oeuvre En Savoir Plus LD Systems - STINGER MIX 6 A G2 - Enceinte de Sono active 6,5" avec Console de Mixage 4 Canaux intégré. Avec son  mixeur intégré,  l'enceinte active Stinger MIX 6 AG2, compacte et légère, est un  choix parfait en petite sonorisation et  en applications de retours musiciens. Elle est équipée d'un boomer de 6,5" (165 mm) et d'un tweeter de 1" (25 mm), pour une réponse en fréquence s'étendant de 80 Hz à 20 kHz et une dispersion sur 80° x 70°, et assure une restitution  d'une étonnante qualité, alliant clarté et punch. Le mixeur intégré offre une entrée stéréo au niveau ligne et trois entrées micro (dont une commutable haute impédance) avec égaliseur grave/aigu et alimentation fantôme, ainsi qu'un multieffet numérique 24 bits. Il permet de  connecter des sources très variées: lecteurs CD ou MP3, iPods, instruments, micros statiques...  La section de sortie comprend un égaliseur Master 3 bandes, pour agir sur le timbre global du signal et éviter le Larsen, un vumètre à 4 segments LED, des sorties enregistrement sur connecteurs RCA/cinch et une sortie Monitor à niveau réglable. La Stinger MIX 6 A G2 est équipée d'un  amplificateur en Classe D d'une puissance de sortie de 2 x 280 Watts crête; une sortie sur jack 6,35 mm permet d'alimenter en cas de besoin une enceinte Stinger MIX 6 G2 passive. Un double insert pour montage sur pied (sur le fond et le côté) permet  un montage vertical ou horizontal,  ce dernier assurant un accès facile aux contrôles du mixeur intégré. Utilisée seule ou conjointement avec sa version passive, l'enceinte amplifiée Stinger MIX 6 A G2 allie performances étonnantes et polyvalence sous un format facilement portable. Housse de transport, enceinte esclave passive et trépied enceinte sont disponibles en option. Type: actif Diamètre Boomer: 6,5" Diamètre Boomer: 165,1 mm Marque Boomer: fabrication sur cahier de charges Diamètre Tweeter: 1" Diamètre Tweeter: 25 mm Marque Tweeter: fabrication sur cahier de charges Angle de Dispersion (H x V): 80° x 70° Réponse en Fréquence: 80 Hz - 20.000 Hz Module Amplificateur: Classe D Puissance Amplificateurs (eff.): 2 x 70 W Puissance Amplificateurs (crête): 2 x 280 W Niveau Maximal de Pression Sonore: 122 dB SPL Fonctions de Protection: limiteur, court-circuit, surtension, surcharge, surchauffe Mixeur intégré: Nombre de Canaux: 4 Canaux d'Entrée Micro: 3 Type de Connecteur d'Entrée Micro: XLR/jack 6,35 mm (Combo) Contrôles Canal Entrée Micro: EQ High, EQ Low, DFX Send, niveau, sélecteur Hi-Z (canal 1 uniquement) Impédance d'Entrée Canaux d'Entrée Micro: (asymétrique) 14 kohms Sensibilité Canal d'Entrée Micro: 70 mV Nombre de Canaux d'Entrée Ligne: 1 Connecteurs Entrée Ligne: mini-jack stéréo 3,5 mm, 2 x RCA/cinch Contrôles Canal Entrée Ligne: EQ High, EQ Low, DFX Send, niveau Impédance d'Entrée Canal d'Entrée Ligne: (asymétrique) 4,4 kohms Sensibilité Canal d'Entrée Ligne: -5 dBu Entrée Haute Impédance (Hi-Z): 1 Connecteur d'Entrée Haute Impédance (Hi-Z): jack 6,35 mm Impédance d'Entrée Haute Impédance (Hi-Z): 100 kohms Sortie Monitor, Niveau Ligne: 1 Connecteur Sortie Ligne Monitor: jack 6,35 mm (symétrique) Contrôles Sortie Ligne Monitor: potentiomètre volume Niveau Maximal de Sortie Monitor: +28 dBu Nombre de Sorties Record: 1 Type de Connecteurs Sortie Record: 2 x RCA (cinch) Niveau Maximal de Sortie Record: +20 dBV Nombre de Sorties Main (amplificateur): 1 Connecteur de Sortie Main (amplificateur): jack 6,35 mm (impédance minimale 4 Ohms) Puissance de Sortie Main (amplificateur), sur 4 Ohms: max. 70 W / 140 W Multieffet DSP intégré: Nombre de Programmes DSP: 16 Contrôles Multieffet DSP: sélecteur Presets, potentiomètre DFX Return, touche Mute Indicateurs Multieffet DSP: LED Peak Section Master: Contrôles Section Master: potentiomètres EQ Low, EQ Mid, EQ High, Main Level, sélecteur alimentation fantôme, sélecteur de tension, interrupteur secteur Alimentation Fantôme: 15 Volts Indicateurs Section Master: Vumètre LED 4 segments, LED Power Embase Secteur: Format IEC Alimentation: transformateur toroïdal Tension Secteur: 110 V - 120 V, 50 - 60 Hz, 220 V - 240 V, 50 - 60 Hz Consommation Électrique (maxi): 180 W Coffret: Type de Coffret: bass reflex Matériau Coffret: MDF (panneau de particules de densité moyenne) Finition Coffret: laque structurée Couleur Boîtier: noir Largeur: 214 mm Hauteur: 323 mm Profondeur: 222 mm Divers: 2 puits pour trépied 16 mm, pieds caoutchouc LD Systems - STINGER MIX 6 A G2 - 6.5" active PA Speaker with integrated 4-channel Mixer Reference: LDMIX6AG2 248,00 € Availability:    Available in supplier stock Processing time:   Under 4 working days Guaranty: 2 years by manufacturer More info LD Systems - STINGER MIX 6 A G2 - 6.5" active PA Speaker with integrated 4-channel Mixer With a  built-in mixer,  the compact, lightweight Stinger MIX 6 AG2 active loudspeaker is the  perfect choice for small-scale PA  and personal monitoring applications. It features a 6.5" woofer and 1" HF transducer with an 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering  amazing sound with clarity and punch. The integrated mixer provides a stereo line and 3 microphone channels with high and low EQ, switchable hi-Z input and phantom power plus 24-bit digital effects. It allows for  connecting a wide variety of sources including MP3 and CD players, iPods, instruments and condenser mics.  The output section includes a 3-band master EQ for overall tone shaping and feedback control, 4-segment LED metering, RCA recording outputs and an adjustable monitor out. The Stinger MIX 6 A G2 incorporates a  Class D amplifier  with 2 x 280 watts peak power and 6.3 mm TRS output to power its optional passive companion Stinger MIX 6 G2. Dual bottom and side stand mount inserts permit  both vertical and horizontal setup,  the latter putting the mixer controls right at your fingertips. On its own or in tandem with the passive unit, the Stinger MIX 6 A G2 provides awesome performance and versatility in an easily portable package. A transport bag, a slave speaker and a speaker stand are available optionally. Type: active Woofer Size: 6.5" Woofer Size: 165.1 mm Woofer Brand: custom made Tweeter Size: 1" Tweeter Size: 25 mm Tweeter Brand: custom made Dispersion Angle (H x V): 80° x 70° Frequency Response: 80 Hz - 20,000 Hz Amplifier: class D Amplifier Power (RMS): 2 x 70 W Amplifier Power (Peak): 2 x 280 W Max SPL: 122 dB Protection: limiter, short circuit, over voltage, overload, temperature Mixer: Channels: 4 Microphone Input Channels: 3 Connector Type Microphone Inputs: XLR/ 6.3 mm jack (combo) Controls for Microphone Input Channels: EQ High, EQ Low, DFX Send, Level, Hi-Z Switch (channel 1 only) Input Impedance Microphone Input Channels: (unbalanced) 14 kOhms Input Sensitivity Microphone Input Channels: 70 mV Line Input Channels: 1 Connector Type Line Input Channels: 3.5 mm stereo jack, 2 x RCA Controls Line Input Channels: EQ High, EQ Low, DFX Send, Level Input Impedance Line Input Channels: (unbalanced) 4.4 kOhms Input Sensitivity Line Input Channels: - 5 dBu Hi-Z Inputs: 1 Hi-Z Input Connectors: 6.3 mm jack Input Impedance Hi-Z Input Connectors: 100 kOhm Monitor Line Outputs: 1 Connector Type Monitor Line Output: 6.3 mm jack (balanced) Controls for Monitor Line Output: Monitor Volume Max Output Level Line Output Monitor: 28 dBu Record Output: 1 Connector Type Record Output: 2 x RCA Max Output Level Record Output: 20 dBV Reinforced Main Output: 1 Connector Type Reinforced Main Output: 6.3 mm (min. 4 Ohm impedance) Increased power main output (at 4 ohm): max 70 W / 140 W DSP Digital Effects Unit: DSP Number of Programs: 16 DSP Controls: Presets, DFX return, Mute switch DSP Display Elements: Peak LED Main Section: Main Section Controls: EQ Low, EQ Mid, EQ High, Main Level, Phantom Power, switch operating voltage, power switch Phantom Power: 15 V Main Section Indicators: 4 segment LED level meter, power LED Power Socket: IEC power socket Power Supply: transformer Operating Voltage: 110 V AC - 120 V AC, 50 - 60 Hz / 220 V AC - 240 V AC, 50 - 60 Hz Power Consumption (max.): 180 W Cabinet: Cabinet Type: bass reflex Cabinet Material: MDF Cabinet Surface: textured coating Cabinet Colour: black Width: 214 mm Height: 323 mm Depth: 222 mm Other Features: 2 x 16 mm pole mount socket, rubber feet LD Systems - STINGER MIX 6 A G2 - 6.5" active PA Speaker with integrated 4-channel Mixer Referencia: LDMIX6AG2 248,00 € Availability:    Available in supplier stock Processing time:   Under 4 working days Guaranty: 2 years by manufacturer Más LD Systems - STINGER MIX 6 A G2 - 6.5" active PA Speaker with integrated 4-channel Mixer With a  built-in mixer,  the compact, lightweight Stinger MIX 6 AG2 active loudspeaker is the  perfect choice for small-scale PA  and personal monitoring applications. It features a 6.5" woofer and 1" HF transducer with an 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering  amazing sound with clarity and punch. The integrated mixer provides a stereo line and 3 microphone channels with high and low EQ, switchable hi-Z input and phantom power plus 24-bit digital effects. It allows for  connecting a wide variety of sources including MP3 and CD players, iPods, instruments and condenser mics.  The output section includes a 3-band master EQ for overall tone shaping and feedback control, 4-segment LED metering, RCA recording outputs and an adjustable monitor out. The Stinger MIX 6 A G2 incorporates a  Class D amplifier  with 2 x 280 watts peak power and 6.3 mm TRS output to power its optional passive companion Stinger MIX 6 G2. Dual bottom and side stand mount inserts permit  both vertical and horizontal setup,  the latter putting the mixer controls right at your fingertips. On its own or in tandem with the passive unit, the Stinger MIX 6 A G2 provides awesome performance and versatility in an easily portable package. A transport bag, a slave speaker and a speaker stand are available optionally. Type: active Woofer Size: 6.5" Woofer Size: 165.1 mm Woofer Brand: custom made Tweeter Size: 1" Tweeter Size: 25 mm Tweeter Brand: custom made Dispersion Angle (H x V): 80° x 70° Frequency Response: 80 Hz - 20,000 Hz Amplifier: class D Amplifier Power (RMS): 2 x 70 W Amplifier Power (Peak): 2 x 280 W Max SPL: 122 dB Protection: limiter, short circuit, over voltage, overload, temperature Mixer: Channels: 4 Microphone Input Channels: 3 Connector Type Microphone Inputs: XLR/ 6.3 mm jack (combo) Controls for Microphone Input Channels: EQ High, EQ Low, DFX Send, Level, Hi-Z Switch (channel 1 only) Input Impedance Microphone Input Channels: (unbalanced) 14 kOhms Input Sensitivity Microphone Input Channels: 70 mV Line Input Channels: 1 Connector Type Line Input Channels: 3.5 mm stereo jack, 2 x RCA Controls Line Input Channels: EQ High, EQ Low, DFX Send, Level Input Impedance Line Input Channels: (unbalanced) 4.4 kOhms Input Sensitivity Line Input Channels: - 5 dBu Hi-Z Inputs: 1 Hi-Z Input Connectors: 6.3 mm jack Input Impedance Hi-Z Input Connectors: 100 kOhm Monitor Line Outputs: 1 Connector Type Monitor Line Output: 6.3 mm jack (balanced) Controls for Monitor Line Output: Monitor Volume Max Output Level Line Output Monitor: 28 dBu Record Output: 1 Connector Type Record Output: 2 x RCA Max Output Level Record Output: 20 dBV Reinforced Main Output: 1 Connector Type Reinforced Main Output: 6.3 mm (min. 4 Ohm impedance) Increased power main output (at 4 ohm): max 70 W / 140 W DSP Digital Effects Unit: DSP Number of Programs: 16 DSP Controls: Presets, DFX return, Mute switch DSP Display Elements: Peak LED Main Section: Main Section Controls: EQ Low, EQ Mid, EQ High, Main Level, Phantom Power, switch operating voltage, power switch Phantom Power: 15 V Main Section Indicators: 4 segment LED level meter, power LED Power Socket: IEC power socket Power Supply: transformer Operating Voltage: 110 V AC - 120 V AC, 50 - 60 Hz / 220 V AC - 240 V AC, 50 - 60 Hz Power Consumption (max.): 180 W Cabinet: Cabinet Type: bass reflex Cabinet Material: MDF Cabinet Surface: textured coating Cabinet Colour: black Width: 214 mm Height: 323 mm Depth: 222 mm Other Features: 2 x 16 mm pole mount socket, rubber feet LD Systems - STINGER MIX 6 A G2 - 6.5" active PA Speaker with integrated 4-channel Mixer Artikel-Nr: LDMIX6AG2 248,00 € Availability:    Available in supplier stock Processing time:   Under 4 working days Guaranty: 2 years by manufacturer Produktinfos LD Systems - STINGER MIX 6 A G2 - 6.5" active PA Speaker with integrated 4-channel Mixer With a  built-in mixer,  the compact, lightweight Stinger MIX 6 AG2 active loudspeaker is the  perfect choice for small-scale PA  and personal monitoring applications. It features a 6.5" woofer and 1" HF transducer with an 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering  amazing sound with clarity and punch. The integrated mixer provides a stereo line and 3 microphone channels with high and low EQ, switchable hi-Z input and phantom power plus 24-bit digital effects. It allows for  connecting a wide variety of sources including MP3 and CD players, iPods, instruments and condenser mics.  The output section includes a 3-band master EQ for overall tone shaping and feedback control, 4-segment LED metering, RCA recording outputs and an adjustable monitor out. The Stinger MIX 6 A G2 incorporates a  Class D amplifier  with 2 x 280 watts peak power and 6.3 mm TRS output to power its optional passive companion Stinger MIX 6 G2. Dual bottom and side stand mount inserts permit  both vertical and horizontal setup,  the latter putting the mixer controls right at your fingertips. On its own or in tandem with the passive unit, the Stinger MIX 6 A G2 provides awesome performance and versatility in an easily portable package. A transport bag, a slave speaker and a speaker stand are available optionally. Type: active Woofer Size: 6.5" Woofer Size: 165.1 mm Woofer Brand: custom made Tweeter Size: 1" Tweeter Size: 25 mm Tweeter Brand: custom made Dispersion Angle (H x V): 80° x 70° Frequency Response: 80 Hz - 20,000 Hz Amplifier: class D Amplifier Power (RMS): 2 x 70 W Amplifier Power (Peak): 2 x 280 W Max SPL: 122 dB Protection: limiter, short circuit, over voltage, overload, temperature Mixer: Channels: 4 Microphone Input Channels: 3 Connector Type Microphone Inputs: XLR/ 6.3 mm jack (combo) Controls for Microphone Input Channels: EQ High, EQ Low, DFX Send, Level, Hi-Z Switch (channel 1 only) Input Impedance Microphone Input Channels: (unbalanced) 14 kOhms Input Sensitivity Microphone Input Channels: 70 mV Line Input Channels: 1 Connector Type Line Input Channels: 3.5 mm stereo jack, 2 x RCA Controls Line Input Channels: EQ High, EQ Low, DFX Send, Level Input Impedance Line Input Channels: (unbalanced) 4.4 kOhms Input Sensitivity Line Input Channels: - 5 dBu Hi-Z Inputs: 1 Hi-Z Input Connectors: 6.3 mm jack Input Impedance Hi-Z Input Connectors: 100 kOhm Monitor Line Outputs: 1 Connector Type Monitor Line Output: 6.3 mm jack (balanced) Controls for Monitor Line Output: Monitor Volume Max Output Level Line Output Monitor: 28 dBu Record Output: 1 Connector Type Record Output: 2 x RCA Max Output Level Record Output: 20 dBV Reinforced Main Output: 1 Connector Type Reinforced Main Output: 6.3 mm (min. 4 Ohm impedance) Increased power main output (at 4 ohm): max 70 W / 140 W DSP Digital Effects Unit: DSP Number of Programs: 16 DSP Controls: Presets, DFX return, Mute switch DSP Display Elements: Peak LED Main Section: Main Section Controls: EQ Low, EQ Mid, EQ High, Main Level, Phantom Power, switch operating voltage, power switch Phantom Power: 15 V Main Section Indicators: 4 segment LED level meter, power LED Power Socket: IEC power socket Power Supply: transformer Operating Voltage: 110 V AC - 120 V AC, 50 - 60 Hz / 220 V AC - 240 V AC, 50 - 60 Hz Power Consumption (max.): 180 W Cabinet: Cabinet Type: bass reflex Cabinet Material: MDF Cabinet Surface: textured coating Cabinet Colour: black Width: 214 mm Height: 323 mm Depth: 222 mm Other Features: 2 x 16 mm pole mount socket, rubber feet LD Systems - STINGER MIX 6 A G2 - 6.5" active PA Speaker with integrated 4-channel Mixer Riferimento: LDMIX6AG2 248,00 € Availability:    Available in supplier stock Processing time:   Under 4 working days Guaranty: 2 years by manufacturer Dettagli LD Systems - STINGER MIX 6 A G2 - 6.5" active PA Speaker with integrated 4-channel Mixer With a  built-in mixer,  the compact, lightweight Stinger MIX 6 AG2 active loudspeaker is the  perfect choice for small-scale PA  and personal monitoring applications. It features a 6.5" woofer and 1" HF transducer with an 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering  amazing sound with clarity and punch. The integrated mixer provides a stereo line and 3 microphone channels with high and low EQ, switchable hi-Z input and phantom power plus 24-bit digital effects. It allows for  connecting a wide variety of sources including MP3 and CD players, iPods, instruments and condenser mics.  The output section includes a 3-band master EQ for overall tone shaping and feedback control, 4-segment LED metering, RCA recording outputs and an adjustable monitor out. The Stinger MIX 6 A G2 incorporates a  Class D amplifier  with 2 x 280 watts peak power and 6.3 mm TRS output to power its optional passive companion Stinger MIX 6 G2. Dual bottom and side stand mount inserts permit  both vertical and horizontal setup,  the latter putting the mixer controls right at your fingertips. On its own or in tandem with the passive unit, the Stinger MIX 6 A G2 provides awesome performance and versatility in an easily portable package. A transport bag, a slave speaker and a speaker stand are available optionally. Type: active Woofer Size: 6.5" Woofer Size: 165.1 mm Woofer Brand: custom made Tweeter Size: 1" Tweeter Size: 25 mm Tweeter Brand: custom made Dispersion Angle (H x V): 80° x 70° Frequency Response: 80 Hz - 20,000 Hz Amplifier: class D Amplifier Power (RMS): 2 x 70 W Amplifier Power (Peak): 2 x 280 W Max SPL: 122 dB Protection: limiter, short circuit, over voltage, overload, temperature Mixer: Channels: 4 Microphone Input Channels: 3 Connector Type Microphone Inputs: XLR/ 6.3 mm jack (combo) Controls for Microphone Input Channels: EQ High, EQ Low, DFX Send, Level, Hi-Z Switch (channel 1 only) Input Impedance Microphone Input Channels: (unbalanced) 14 kOhms Input Sensitivity Microphone Input Channels: 70 mV Line Input Channels: 1 Connector Type Line Input Channels: 3.5 mm stereo jack, 2 x RCA Controls Line Input Channels: EQ High, EQ Low, DFX Send, Level Input Impedance Line Input Channels: (unbalanced) 4.4 kOhms Input Sensitivity Line Input Channels: - 5 dBu Hi-Z Inputs: 1 Hi-Z Input Connectors: 6.3 mm jack Input Impedance Hi-Z Input Connectors: 100 kOhm Monitor Line Outputs: 1 Connector Type Monitor Line Output: 6.3 mm jack (balanced) Controls for Monitor Line Output: Monitor Volume Max Output Level Line Output Monitor: 28 dBu Record Output: 1 Connector Type Record Output: 2 x RCA Max Output Level Record Output: 20 dBV Reinforced Main Output: 1 Connector Type Reinforced Main Output: 6.3 mm (min. 4 Ohm impedance) Increased power main output (at 4 ohm): max 70 W / 140 W DSP Digital Effects Unit: DSP Number of Programs: 16 DSP Controls: Presets, DFX return, Mute switch DSP Display Elements: Peak LED Main Section: Main Section Controls: EQ Low, EQ Mid, EQ High, Main Level, Phantom Power, switch operating voltage, power switch Phantom Power: 15 V Main Section Indicators: 4 segment LED level meter, power LED Power Socket: IEC power socket Power Supply: transformer Operating Voltage: 110 V AC - 120 V AC, 50 - 60 Hz / 220 V AC - 240 V AC, 50 - 60 Hz Power Consumption (max.): 180 W Cabinet: Cabinet Type: bass reflex Cabinet Material: MDF Cabinet Surface: textured coating Cabinet Colour: black Width: 214 mm Height: 323 mm Depth: 222 mm Other Features: 2 x 16 mm pole mount socket, rubber feet Global Audio Store, Revendeur LD Systems agréé Global Audio Store, Authorized LD Systems Dealer Global Audio Store, Authorized LD Systems Dealer Global Audio Store, Authorized LD Systems Dealer Global Audio Store, Authorized LD Systems Dealer)

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter   Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 11-mai-19 à 14:32:07 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter   Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 11-sept.-19 à 08:16:07 Paris, le vendeur a ajouté les informations suivantes:

Features:  1. This amplifier can make your TV antenna get more channels, improve the clarity of the frequency,  expand the receiving range. 2. The number of channels you can receive is determined by what's being broadcast in your area.  3. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather.  4. Check out what channels are available in your area first and how many you are able to receive.  5. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers,  Use this amplifier to boost the weakened signals. 6. We do not recommend using this amplifier if your house is very close to the broadcast tower  and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable: 1.5C-2V / Black L=0.6M 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Package List:  1 x HDTV Antenna Amplifier   Features:  1. This amplifier can make your TV antenna get more channels, improve the clarity of the frequency,  expand the receiving range. 2. The number of channels you can receive is determined by what's being broadcast in your area.  3. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather.  4. Check out what channels are available in your area first and how many you are able to receive.  5. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers,  Use this amplifier to boost the weakened signals. 6. We do not recommend using this amplifier if your house is very close to the broadcast tower  and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable: 1.5C-2V / Black L=0.6M 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Package List:  1 x HDTV Antenna Amplifier Le 13-mai-19 à 15:22:06 Paris, le vendeur a ajouté les informations suivantes:

Features:  1. This amplifier can make your TV antenna get more channels, improve the clarity of the frequency,  expand the receiving range. 2. The number of channels you can receive is determined by what's being broadcast in your area.  3. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather.  4. Check out what channels are available in your area first and how many you are able to receive.  5. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers,  Use this amplifier to boost the weakened signals. 6. We do not recommend using this amplifier if your house is very close to the broadcast tower  and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable: 1.5C-2V / Black L=0.6M 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Package List:  1 x HDTV Antenna Amplifier   Features:  1. This amplifier can make your TV antenna get more channels, improve the clarity of the frequency,  expand the receiving range. 2. The number of channels you can receive is determined by what's being broadcast in your area.  3. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather.  4. Check out what channels are available in your area first and how many you are able to receive.  5. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers,  Use this amplifier to boost the weakened signals. 6. We do not recommend using this amplifier if your house is very close to the broadcast tower  and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable: 1.5C-2V / Black L=0.6M 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Package List:  1 x HDTV Antenna Amplifier Le 11-mai-19 à 15:45:15 Paris, le vendeur a ajouté les informations suivantes:

Digital HDTV signal amplifier booster for cable TV fox HD channel 2 ZH This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable Length: 80cm/31.50in (Approx.) 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Note:  1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!   Package includes:  (No retail package) 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 23-oct.-19 à 10:45:33 Paris, le vendeur a ajouté les informations suivantes: