Analogue outputs

Focusrite Saffire Pro 14, Interface audionumérique FireWire - jamais utilisé.  CD d'installation fournie. 1 x câble Firewire -> Firewire fourni. Fiche technique   Fabricant:Focusrite Modèle:Saffire Pro 14 Série:Saffire Catégorie:Interfaces audionumériques FireWire Fiche créée le:11/08/2010 Microphone Inputs 1-2 Frequency Response: 20Hz - 20kHz +/- 0.2 dB Gain Range: +13dB to +60dB Maximum Headroom +8dBu THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter) Noise EIN: 124dB analogue to digital (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter) Input Impedance: 2k Ohm Line Inputs (Inputs 1-2) Frequency Response: 20Hz - 20kHz +/- 0.2dB Gain Range: -10dB to +36dB THD+N: 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter) Noise: -90dBu (22Hz/22kHz bandpass filter) Input Impedance: >10k Ohm Line Inputs 3-4 Frequency Response: 20Hz - 20kHz +/- 0.2 dB Gain Range: Switch-able between +16dBu or -10dBV for 0dBFS (balanced inputs) THD+N: 0.003% (measured at 1kHz with a 20Hz/22kHz bandpass filter) Noise: -100dBu (22Hz/22kHz bandpass filter) Input Impedance: >10k Ohm Instrument Inputs (Inputs 1 and 2) Frequency Response: 20Hz - 20kHz +/- 0.1dB Gain Range: +13dB to +60dB THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter) Noise: -87dBu (20Hz/22kHz bandpass filter) Analogue Audio Outputs (Outputs 1-4) 4 Electronically Balanced Outputs Maximum Output Level (0dBFS): +10dBu THD+N: 0.001% (0dBFS input, 20Hz/22kHz bandpass filter) Crosstalk (Channel Isolation) Any input to input: > 100dB Any output to output: > 100dB Any input to output: > 100dB DIGITAL PERFORMANCE A/D Dynamic Range > 109dB (A-weighted), all analogue inputs D/A Dynamic Range > 106dB (A-weighted), all analogue outputs Clock Sources: - Internal Clock - Sync to Word Clock on SPDIF Input (RCA) JetPLLTM PLL technology providing superb jitter reduction for class leading converter performance Clock jitter < 250 picoseconds Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz 8 input channels to computer: Analogue (4), SPDIF (2) and Loop-back (2) 6 physical output channels from computer: Analogue (4), SPDIF (2) 12 DAW output streams Assignable 18 input by 6 output mixer Weight and Dimensions 1.5kg / 3.3lbs 215mm (W) x 45mm (H) x 220mm (D) (8.5 x 1.8 x 8.7 inches) Connectivity Analogue Channel Inputs (Inputs 1-2) 2 Mic XLR Combo (channels 1-2) on front panel 2 Line 1⁄4” TRS (channels 3-4) on rear panel Automatic switching between Mic / Line (channels 1-2) Switching between Line / Instrument Inputs (channels 1-2) via Saffire MixControl Application Switching between +16dBu (low) and -10dBV (high) gain on inputs 3-4 via Saffire MixControl Application Digital Channel Inputs (Inputs 5-6) 44.1 - 96kHz Stereo S/PDIF input on RCA Analogue Audio Outputs (Outputs 1-4) 4 1⁄4” TRS Jacks Output Level control (analogue) for outputs 1 and 2 Stereo Headphones Mix 1 on 1⁄4” TRS (also routed to Outputs 3 & 4) with independent volume control Digital Channel Outputs (Outputs 5-6) 44.1 - 96kHz Stereo S/PDIF Output on RCA Other I/O 1 6-pin FireWire S400 socket 2 Standard 5-pin DIN MIDI connectors: In and Out DC Power Input Connector (for use with supplied universal input power supply) Front Panel Indicators 2 2 segment input meters, Sig (-18) and O/L (0dBFS) “LKD” Locked Indicator “FW” Host Connected Indicator “Power” Indicator Instrument input source selection LED for channels 1 and 2 Phantom Power (48V) switch and LED for inputs 1 and 2

8 legendary Class A mic preamps in the same class as the Focusrite ISA and RED ranges. They don't make them like this anymore... This unit is in very good condition - see pictures: front face is pristine with no scratches, only a few usage scratches around the rack ears from installation (marks will be hidden again after mounted onto a rack). It never left the studio. The Octopre provides eight pristine discrete channels of Focusrite Class A mic preamp and compression, OctoPre PLATINUM routes directly to any digital audio workstation via eight standard analogue outputs. Each channel features a revolutionary compressor/limiter circuit, providing a warm-sounding compressor, which morphs into a brick wall limiter to avoid those critical overs, ensuring total control over all eight channels. The mic preamps featured in OctoPre PLATINUM are similar to those featured in the award winning Focusrite Top-Of-The-Range. They are a transistor-based Class A design utilising the same full-bandwidth philosophy as the legendary RED and ISA mic preamps, ensuring detail and clarity without colouration. The first two 'super channels' also feature phase reverse, as well as TRS jack inputs on the front fascia for quick and easy, DI-free instrument plug-in. Eight line level balanced (+4 dBu) analogue inputs and outputs are provided as standard via 25-pin D-type connectors. These D-type connectors may be routed to 8 XLR/TRS by means of an (optional) 8-way 25-pin D-type to 8 XLR/TRS breakout cable, available separately. In addition to the analogue outputs, the OctoPre can be fitted with digital output (OPTIONAL CARD). Detailed description from the focusrite website: The OctoPre is an eight channel Class A microphone preamplifier, featuring a classic Focusrite mic pre and a revolutionary compressor/limiter circuit on each channel. The mic pres featured in the OctoPre are similar to those featured elsewhere in the award winning Focusrite Platinum range. They are a transistor-based Class A design utilising the same full bandwidth philosophy as the legendary Focusrite Red and ISA mic pres, ensuring detail and organic clarity without obvious colouration. The revolutionary compressor/limiter circuit provides each channel with warmsounding compression, which morphs into brick wall limiting to avoid critical ‘overs’ when recording digitally. The first two channels also feature phase reverse, as well as unbalanced 1/4” jack inputs on the front fascia for quick and easy, DI-free plug-in of guitars and basses. With Class A Focusrite analogue signal processing and comprehensive A/D interface options, OctoPre is the perfect partner for a Pro Tools™ system or any other digital audio workstation, making high quality, multi-channel recording easy. Equally, it could be utilised as part of a compact multi-channel location recording solution (with a laptop or ADAT™, for example), or as an additional set of professional-quality mic pres for any analogue or digital console or hard disk recorder. The original OctoPre is a typical Class A Platinum design, (based around a 737 Rhom transistor) and it is solid state, it has extended bandwidth (up to at least 180kHz at the top end) and sounds transparent. The original OctoPre has an edge in being more forgiving if you want to slam the pre's hard (but more 2nd order harmonic distortion as a result). -The Octopre has a dynamics (compressor/limiter) control on each channel -The Octopre has 48V phantom power switches on each channel -The Octopre has line in and out connections on 25 pin D-sub connectors and 8 XLR inputs for mics Performance specifications: THD:0.001% @ 20dBu input, mic and line at 0dB gain Noise:-96 dB at unity gain through the unit Mic EIN:-128 dBu @ 6dB of gain with 150Ω termination impedance Frequency response:-1 dB at 10 Hz to 200 kHz Carefully packed with powercord. Shipping France: 27,80 € Shipping Europe: 36,30 €

Platine minidisc refait à neuf. Elle fonctionne parfaitement. Specifications Type: Mini disc player / recorder Track system: 2-channel stereo Optical pickup: KMS-210A/J-N Sampling frequency: 44.1kHz Frequency response: 5Hz to 20kHz Signal to noise ratio: 105dB Analogue inputs: 125mV (line) Analogue outputs: 2.0V (line) Digital Inputs: coaxial, optical Digital outputs: optical Dimensions: 430 x 125 x 375 mm Weight: 14.3 kg SONY MDS-JA50ES MD Minidisk recorder. État: Reconditionné par le vendeur

Digital Audio Tape Recorder (1990-93) Type: digital audio tape deck Track System: 2-channel stereo Tape Speed: 4.075, 8.15, 12.225 mm/s Recording Time: 240 minutes Heads: rotary D/A Converter: 1 bit A/D Converter: delta sigma 1 bit Sampling Frequency: 48, 44.1, 32kHz Frequency Response: 2Hz to 22kHz Signal to Noise Ratio: 92 dB. Dynamic range: 94dB Total Harmonic Distortion: 0.003% Analogue Inputs: 63mV (line) Analogue Outputs: 2.0V (line). Digital Inputs: coaxial, optical Digital Outputs: coaxial, optical Dimensions: 420 x 129 x 336mm Weight: 6.6kg LIVRAISON SOIGNÉE * CHÉQUE ACCEPTÉ * INTERNATIONAL EUR WELCOME *

DCC PHILIPS 951 PLAYER / RECORDER Type: digital compact cassette deck Track System: 2-channel stereo Tape Speed: 4.8 cm/s Recording Time: 90 minutes D/A Converter: bitstream A/D Converter: Sigma Delta bitstream, 18 bit Sampling Frequency: 48, 44.1, 32kHz Frequency Response: 20Hz to 22kHz Signal to Noise Ratio: 102dB Dynamic Range: 95dB Channel Separation: 85dB Analogue Inputs: 150mV (line), 3mV (mic) Analogue Outputs: 2.0V (line) Digital Inputs: coaxial, optical Digital Outputs: optical Dimensions: 435 x 90 x 300mm Weight: 4kg NO REMOTE CONTROL WITH ORIGINAL OWNER MANUAL + 1x DCC CASSETTE Need service / sold as is - I've recorded a cassette, the recording and playing was good but sometimes the sound is chopped. And we can ear a light hiss in the mechanism En savoir plus

Seconde main, aucune marque de rackage (voir photos pour les légères traces au-dessous), fonctionne parfaitement sous Mojave mais double emploi et pas le temps de m’en servir donc je m’en sépare à regret. Livrée en boîte avec le CD d’installation, le cable d’origine (Firewire 400), un cable FW400 vers FW800 sera joint en complément. Les drivers sont toujours disponibles sur le site d’Echo même s’ils ont cessé leur production. Frais de port: 13€75 (ou 8€15 Mondial Relay) _______________________________________________________ Second hand, no racking marks (see photos for slight traces below), works perfectly under Mojave (but the latest drivers don’t allow to work in 192khz anymore, PC or MAC). No time to use it so I reluctantly part with it. Delivered in its original box with installation CD, original cable (Firewire 400), an FW400 to FW800 cable will be included in addition. Drivers are still available for their discontinued audio products on the Echo site. Shipping EU: 22€45 ________________________________________________________     •    Sample rates: 44.1, 48, 88, 96, 176 and 192 kHz from internal clock; external clock range 32kHz to 192kHz.     •    Analogue inputs: 12 quarter-inch TRS balanced/unbalanced jack sockets with individually switchable +4dBu/-10dBV sensitivity and 10kΩ impedance.     •    Analogue outputs: 12 balanced/unbalanced TRS quarter-inch jacks with individually switchable +4dBu/-10dBV output level.     •    Digital I/O: word clock and MIDI in and out.     •    Dynamic range: input 113dBA, output 114dBA.     •    Frequency response: 20Hz to 20kHz ±0.1dB.     •    THD + Noise: <0.002 percent.

Roland MC-909: Sampling Groovebox • Excellent état général extérieur et intérieur. • La Groovebox a été entièrement révisée et nettoyée. • Les 16 pads sont neufs (changés il y a trois mois). • Tout fonctionne parfaitement. • La dernière version du système a été installée. • Livrée avec une carte SmartMedia de 64 Mo. • Manuels en PDF (français / anglais / manuel de service). -> L'expédition se fera dans un colis bien protégé, en Colissimo avec numéro de suivi. Caractéristiques techniques: - Echantillonneur de 16 Mo interne extensible à 256 Mo - Fonctions "CHOP", "Time Stretch", "Normalize", "Emphasis" - Fonction "Resample" - 2 Multi-effets (2x56 types) avec contrôleurs temps réel - Outils de Mastering intégrés - Emulation: permet de contrôler le pitch et le tempo de n'importe quel échantillon audio ou de l'ensemble du séquenceur - Lecteur de carte Smart Média - Double "DBEAM" - Connexion USB pour le transfert des échantillons - 6 sorties analogiques séparées - Entrées ligne stéréo - Entrée/ sortie S/PDIF optique et coax - Véritable synthétiseur - Architecture sonore dérivée des séries XV - 693 formes d'ondes, dont les sons de la carte SRX "Dance" - Extension par carte SRX (1 slot) - Large écran LCD rétro éclairé - 8 faders de contrôle - 16 parties simultanées - 64 voix de polyphonie - Temps d’échantillonnage: Standard 16 Mo: mono. 180sec (stéréo 90 sec). Jusqu'à 272 Mo (standard 16 Mo + DIMM 256 Mo): mono. 51 min (stéréo 26 min). compatible avec les formats WAV/AIFF, format de sauvegarde audio: WAV/AIFF - Effets de mastering: compresseur et égaliseur graphique 3 bandes - Séquenceur 16 pistes + piste tempo/Mute Control - Tempo: 5 – 300 BPM - 128 styles preset - 128 user - Nombre de notes maxi: 1300000 - Fichier exécutable: Standard MIDI Files (Format 0/1) - 6 sorties séparées - 2 entrées ligne - Prise casque - MIDI: IN, OUT - S/PDIF In, out - Dimensions: 49,1 x 38,6 x 12,3 cm - Poids: 6 kg Roland MC-909: Sampling Groovebox • Excellent general condition outside and inside. • The Groovebox has been completely overhauled and cleaned. • The 16 pads are new (changed three months ago). • Everything works perfectly. • The latest version of the system has been installed. • Delivered with a 64 MB SmartMedia card. • Manuals in PDF (French / English / service manual). -> Shipping will be done in a well protected parcel, in Colissimo (French Post) with tracking number. Technical specifications: - Sampler of 16 Mo internal expandable to 256 Mo - Functions "CHOP", "Time Stretch", "Normalize", "Emphasis" - Resample function - 2 Multi-effects (2x56 types) with real-time controllers - Integrated Mastering Tools - Emulation: allows you to control the pitch and tempo of any audio sample or the entire sequencer - Smart Media Card Reader - Double "DBEAM" - USB connection for sample transfer - 6 separate analogue outputs - Stereo line inputs - Optical and coaxial S/PDIF input/output - True synthesizer - Sound architecture derived from the XV series - 693 waveforms, including sounds from the SRX "Dance" card. - Expansion by SRX card (1 slot) - Large backlit LCD screen - 8 control faders - 16 simultaneous games - 64 polyphonic voices - Sampling time: Standard 16 MB: mono. 180sec (stereo 90 sec). Up to 272 MB (Standard 16 MB + DIMM 256 MB): mono. 51 min (stereo 26 min). compatible with WAV/AIFF formats, audio backup format: WAV/AIFF - Mastering effects: compressor and 3-band graphic equalizer - 16-track sequencer + Tempo/Mute Control track - Tempo: 5 - 300 BPM - 128 preset styles - 128 wear - Maximum number of notes: 1 300 000 - Executable File: Standard MIDI Files (Format 0/1) - 6 separate outputs - 2 line inputs - Headphone socket - MIDI: In, Out - S/PDIF: In, out - Dimensions: 49.1 x 38.6 x 12.3 cm - Weight: 6 kg

Type: digital compact cassette deck Track System: 2-channel stereo Tape Speed: 4.8 cm/s Recording Time: 90 minutes Sampling Frequency: 48, 44.1, 32kHz Frequency Response: 20Hz to 22kHz Signal to Noise Ratio: 92dB Dynamic Range: 92dB Channel Separation: 85dB Total Harmonic Distortion: 0.005% Analogue Outputs: 2.0V (line) Digital Inputs: coaxial, optical Digital Outputs: coaxial, optical Dimensions: 435 x 140 x 300mm NO REMOTE / WITH OWNER MANUAL / WITH 1 DCC TAPE IT PLAYS b'&' RECORDS CASSETTE BUT OFTEN THERE ARE SOME NOISY SOUNDS b'>'b'>'b'>'b'>'NEED SERVICE / SOLD AS IS Weight: 9kg En savoir plus Collaboration commerciale.

Prism Sound Dream ADA-8XR. État : "Occasion" - ADA-8XR 8AD/8DA+AES - 8 analog In (XLR), 8 analog out (XLR), Carte AES-EBU Perfect Shape / Etat parfait  Years: 2016  Feel free to ask any questions:) ---------------------------------- Overview  The ADA-8XR is a multi-channel AD/DA converter that can be in numerous ways using to suit a very wide variety of applications. It can be a 16 channel AD converter, a 16 Channel DA converter or an 8 channel AD/DA converter. It can be a, or an AES/EBU / AES3 / SPDIF Digital to Analogue or Analogue to Digital converter. It can act as a high resolution for recording or post-production. Similarly it can work with a wide range of other popular Digital Audio Workstations (DAWs) including Logic, Cubase, Nuendo and others. In fact, there's not a lot it can't do when it comes to digital audio conversion.  Applications  The ADA-8XR is the top professionals' converter of choice in the most exacting applications in music and sound recording, mastering, broadcast and post-production. Offering the cleanest and most transparent conversion available, the ADA-8XR is ideal for producers, engineers and songwriters wanting to produce top-quality results when recording, tracking & overdubbing, mixing to stereo or surround, mastering and monitoring. The ADA-8XR is perfect for recording vocal, single instruments, drums or orchestra and is just as much at home providing multiple outputs for external analogue summing. It is in use in the top studios around the world as well as being used in numerous film sound tracks.  Design Philosophy  The ADA-8XR takes the philosophy of the widely-acclaimed Prism Sound converter range a stage further: Now, the goals of ultimate sound quality, and un-matched versatility have been realised in a modular multi-channel, 24-bit 192kHz-capable format. The ADA-8XR provides A/D and D/A conversion and the essential digital interfaces with a stereo monitor mix output in digital and analogue formats.  Clocking and Synchronization  Unlike most other converter systems, the ADA-8XR is ideal as a master clock for your entire system, whether running from its precision internal reference or from an external source. No external clock source can improve the performance or influence the sound of the ADA-8XR. In addition, the ADA-8XR can run in Pro Tools Loop Sync mode, or lock to AES3, AES11 or Wordclock. The ADA-8XR delivers your recordings with perfect transparency, whatever the setup.  Configuration options  The ADA-8XR is a modular system and this provides great flexibility when creating systems with larger numbers of channels. Whether you need just a few channels of high-quality conversion or large a multi-track setup, the ADA-8XR is the natural choice. Using combinations of the basic system options and the range of digital interfaces you can build the system that perfectly matches your requirements. For more detail see the section.  ADA-8XR Summary Channel Configurations  - Up to 16 channels of state-of-the art 24-bit, 192kHz conversion in one great-sounding 2U package. - Choice of 8AD plus 8DA; 16AD; 16DA or D-D only configurations. - Dual-path architecture allows independent operation of two 8-channel paths: - Each path (bank of 8 channels) can be assigned to either record or play functions; - Each path can have independent clock references at different sample rates if desired; - Each path is independently configurable; - Each path can drive analogue and digital outputs simultaneously if desired - Allows Source Monitoring with simultaneous A/D and D/A conversion. - Electronically balanced, transformerless, galvanically isolated XLR analogue inputs and outputs ensure freedom from noise pick-up and crosstalk, with software-controlled balance and line-up; - Prism Sound 'Over-killer' selectable on analogue inputs: the best-sounding gentle limiting for louder masters - with no 'overs'; Dig

    iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:     Item Description Remarks Inputs/Outputs     Inputs (rear) USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in) Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible)   Intelligent SPDIF® Coaxial 3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM   SPDIF Optical         Outputs (rear) Audio RCA L+R     Intelligent SPDIF® Coaxial Up to 192kHz PCM       Output (right side) SmartPower® Socket Fast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A             Controls     Controls (front)     - HP Output Audio 6.3mm Headphone Jack   - Volume with Power On/Off switch Precision analogue volume control - 3.5mm Input   Auto disable the digital section when this is in use - X-Bass® On/Off   - 3D Holographic Sound® On/Off Auto-switching for Speakers® and Headphones® (two separate and distinct circuits)       Controls (left side)     - Power Mode Turbo, Normal, Eco Computer controlled power and gain scaling - Polarity Normal/Inverted   - Filter 3 positions, 6 filters (see filter section below)       Controls (bottom)     - Line Direct/Preamplifier Preamplifier function Enable/Disable, 0/9dB gain selectable Fixed 2V or variable with up to 5V available - iEMatch® Perfect-matching circuit for IEMs (eliminate hiss) Off / High Sensitivity Headphone / Ultra Sensitivity Headphone             DAC section     DAC Dual-core DSD, DXD, PCM DAC by Burr Brown 2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR   Bit-Perfect DSD processing, Bit-Perfect PCM processing         Clock Ultra low jitter GMT computer controlled Femto Clock RMS jitter 12kHz – 1MHz       Audio Formats DSD 512/256/128/64 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 All native decoding, no internal hardware conversion   DXD 2x/1x 768/705.6/384/352.8kHz All native decoding, no internal hardware conversion   PCM 768/705.6/384/352.8/192/176.4/96/88.2/ 48/44.1kHz All native decoding, no internal hardware conversion       Filters     - PCM Bit-Perfect Processing/Minimum Phase/Standard Digital filters selectable - DSD Extreme/Extended/Standard Range Analogue filters selectable - DXD Bit-Perfect Processing Fixed analogue filter             Specifications (DAC Section)     Dynamic Range (Line) >117db(A)   THD & N (0dBFS Line)   Output Voltage (Line) >2V   Output Impedance (Zout)   Jitter (correlated) Below AP2 test set limit               Headphone Power Output     HP Amp Output Power (max) Power (continuous.) - Turbo mode 10.0V/4,000 mW @ 16 Ohm >1560 mW @ 64 Ohm - Normal mode 5.5V/1,900 mW @ 16 Ohm >950 mW @ 32 Ohm - Eco mode 2.0V/500 mW @ 8 Ohm >250 mW @ 16 Ohm             Specifications (Headamp Section)     Dynamic Range (HP) >115dB(A) (Eco Mode, 2V Out)   THD &N (HP 500mW/16R)   Output Voltage (HP) >8V (Turbo Mode)   Output Impedance (Zout)   Maximum Output Power 4,000mW @ 16 Ohm Load when using sinewave testing the iDSD micro may engage protection circuits Continuous Output Power 1,000mW @ 64 Ohm Load  

ROTEL RA-1592. État: Occasion en parfaite condition, aucunes trace d’usure, le rodage vient tout juste d être terminer avec 100h d écoutes. Vendu avec la télécommande et sans la boîte d origine. The RA-1592 Integrated Amplifier leverages the strengths of our award winning RC-1590 preamplifier and RB-1582 MkII power amplifier in a sleek single chassis design. DIMENSIONS (W × H × D) 431 × 144 × 425mm 17" × 5.7" × 16" FRONT PANEL HEIGHT 3U / 132.6mm (5.25") POWER REQUIREMENTS 230V, 50Hz POWER CONSUMPTION 500W STANDBY POWER CONSUMPTION NET WEIGHT 16.8kg (37lbs.) BTU RATING 1239 BTU/h CONTINUOUS POWER OUTPUT 200W/Ch (All channels driven, 8Ω) TOTAL HARMONIC DISTORTION (THD) (20Hz–20kHz) FREQUENCY RESPONSE Line Level Inputs: 10Hz - 100kHz ±0.5dB Digital Inputs: 10Hz - 90kHz ±2dB Phono Input: 20Hz - 20kHz ±0.5dB S/N RATIO (IHF "A" Weighted) Line Level Inputs: 103dB Digital Inputs: 102dB Phono Input: 80dB There has never been a better time to be a music lover. Today’s source options provide limitless audiophile quality music. CD-or-better quality streaming, high resolution download sites, inexpensive mass storage devices, the still resilient CD and the resurgence of classic vinyl are all providing a wealth of content at impressively high fidelity. To hear all this music as the artist intended requires an extraordinarily flexible, sonically capable component. The RA-1592 Integrated Amplifier is exactly that component. It leverages the strengths of our award winning RC-1590 preamplifier and RB-1582 MkII power amplifier in a sleek single chassis design. With a powerful 200 watt per channel Class AB amplifier using performance audio grade components, the RA-1592 can effortlessly drive large speaker systems. The impressive Rotel manufactured toroidal transformer is a key element in the power supply design which also includes custom slit-foil storage capacitors and a dual-monoblock topology. All of this helps to ensure the amplifier performance stands up to even the most complex music and real world playback conditions. To complement the amplifier section, the RA-1592’s preamplifier incorporates the superb 32-bit/768kHz AKM digital-to-analogue converter (DAC) and analogue stages of the highest quality. The DAC and surrounding circuitry supports a vast array of source inputs including DSD capable PC-USB (24-bit/192kHz), 3 coaxial, 3 optical, integrated aptX® Bluetooth and front mounted USB iPod input. In recognition of the faithful analogue music lovers, there is a phono stage input (MM), XLR balanced input and 3 analogue RCA source inputs. User selectable A-B speaker outputs with 5-way binding posts, RCA pre-output and dual subwoofer outputs provide the ultimate flexibility in installation. The amplifier protection circuits monitor DC offset, overcurrent, short circuit and temperature to protect both the electronics and attached speakers. Custom integration features include RS232 and Ethernet IP control, 2 trigger outputs, remote IR input and automated digital signal sense power control for easy integration with streaming sources and control systems. The RA-1592 is the finest integrated amplifier yet in Rotel’s 55 year history of producing performance audio components.

iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:   Item Description Remarks Inputs/Outputs   Inputs (rear)USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in)Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible) Intelligent SPDIF® Coaxial3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM SPDIF Optical    Outputs (rear)Audio RCA L+R  Intelligent SPDIF® CoaxialUp to 192kHz PCM   Output (right side)SmartPower® SocketFast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A       Controls   Controls (front)  - HP OutputAudio 6.3mm Headphone Jack - Volume with Power On/Off switchPrecision analogue volume control DAC section   DACDual-core DSD, DXD, PCM DAC by Burr Brown2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR Bit-Perfect DSD processing, Bit-Pe

Amplifier Av Surround Receiver 7.1 MARANTZ ZR6001 (very good condition). Très rare ampli home cinéma haut de gamme Très bon état de fonctionnement ! Très bon état esthétique ! Télécommande fournie ! 14kg de technologie ! Produit très haut de gamme ! Etage de puissance et pré-amplification Puissance de sortie: 7 x 95 W RMS Impédance nominale: 8 ohms Décodeurs intégrés Dolby Digital EX, DTS ES (Matrix et Discrete), DTS Neo:6 (Cinema et Music), DTS 96/24, DPLI, DPL II (Game Movie et Music), DPLIIx, HDCD Autres effets Surround CS 6.1 (CS II Cinema, Music Mono), stéréo multicanale, Movie, Hall, Matrix, Stadium, Virtual Conversion Numérique / Analogique (N/A) et A/N Crystal: 24 Bits 192 kHz via CS42428 Traitement numérique (DSP) et type: 32 Bits via CS49400 Réponse en fréquence numérique (96kHz PCM): 8 Hz - 100 kHz (large bande) Réponse en fréquence analogique (/- 3dB): 8 Hz - 100 kHz (large bande) Rapport signal bruit: 105 dB Distorsion Harmonique Totale: 0,08% Connectique Entrées / Sorties Audio / Vidéo Entrées audio analogiques: 7 (TV, VCR1, VCR2, CD, CD-R/MD, cassette, Aux.) Entrées audio numériques: 4 (2 optiques 2 coaxiales) Entrées audio vidéo: 4 (toutes doublées S-Vidéo) Entrées composantes: 2 x YUV Entrées en façade: 1 x A/V doublée S-Vidéo Entrées analogiques: 1 x 7.1 canaux Entrée D-Bus multiroom, multi RC (flasher) Sorties audio analogiques: 4 (VCR1/ VCR2 CD-R/MD, cassette) 1 sortie auxiliaire PLC Sorties audio numériques: 2 (1 optique 1 coaxiale) Sorties audio vidéo: 2 (toutes doublées S-vidéo) Sorties Moniteur: 3 (1 x CVBS 1 x S-vidéo 1 x Y, Cb/Pb, Cr/Pr) Sorties Pré-out 7.1 Sorties D-Bus multi. alimentation commutée, multroom radio commandé Sorties Ir emitters x4 Bornes HP / possibilité fiches banane: 7 paires à vis section standard RS232C bi-directionnelle, mémoire ligne interne Fonctions de confort Télécommande RC 5500 SR (préprogrammée) Tuner RDS AM / FM (PS, PTY, RT): 50 Présélections Menu d'installation: OSD avec réglage retard enceintes UpConversion vidéo CVBS composite vers S-Vidéo et YUV composantes Composants audiophiles haute qualité Fonction Lip Sync Réglage de la synchronisation du retard acoustique avec circuits vidéo internes (200 msec/ch.) Fréquence de coupure basse réglable: 40 Hz, 60, 80, 100, 120 Hz Technologie CPL (Control Power Line) Dimensions (L x H x P): 440 x 162 x 463 mm - Poids 14 kg. Very rare high-end home cinema amplifier Very good working condition! Very good aesthetic condition! Remote control included! 14kg of technology! Power stage and pre-amplification Output power: 7 x 95 W RMS Nominal Impedance: 8 ohms Integrated decoders Dolby Digital EX, DTS ES (Matrix and Discrete), DTS Neo: 6 (Cinema and Music), DTS 96/24, DPLI, DPL II (Game Movie and Music), DPLIIx, HDCD Other surround effects CS 6.1 (CS II Cinema, Music Mono), multichannel stereo, Movie, Hall, Matrix, Stadium, Virtual Digital / Analogue (D / A) and A / D Crystal Conversion: 24 Bits 192 kHz via CS42428 Digital processing (DSP) and type: 32 Bits via CS49400 Digital frequency response (96kHz PCM): 8Hz - 100kHz (wideband) Analog frequency response (/ - 3dB): 8 Hz - 100 kHz (wideband) Signal-to-noise ratio: 105 dB Total Harmonic Distortion: 0.08% Connectivity Audio / Video Inputs / Outputs Analog audio inputs: 7 (TV, VCR1, VCR2, CD, CD-R / MD, cassette, Aux.) Digital audio inputs: 4 (2 optical 2 coaxial) Audio video inputs: 4 (all dubbed S-Video) Component inputs: 2 x YUV Front inputs: 1 x A / V doubled S-Video Analog inputs: 1 x 7.1 channels Multiroom D-Bus input, multi RC (flasher) Analog audio outputs: 4 (VCR1 / VCR2 CD-R / MD, cassette) 1 PLC auxiliary output Digital audio outputs: 2 (1 optical 1 coaxial) Audio video outputs: 2 (all S-video dubbed) Monitor outputs: 3 (1 x CVBS 1 x S-video 1 x Y, Cb / Pb, Cr / Pr) Pre-out 7.1 Multi D-Bus outputs. switched power, radio controlled multroom Ir emitters outputs x4 Loudspeaker terminals / possibility of banana plugs: 7 pairs of screws, standard section Bi-directional RS232C, internal line memory Comfort functions RC 5500 SR remote control (pre-programmed) RDS AM / FM tuner (PS, PTY, RT): 50 Presets Setup menu: OSD with speaker delay adjustment UpConversion of composite CVBS video to S-Video and component YUV High quality audiophile components Lip Sync function Adjustment of the synchronization of the acoustic delay with internal video circuits (200 msec / ch.) Adjustable low cutoff frequency: 40 Hz, 60, 80, 100, 120 Hz Powerline technology (Control Power Line) Dimensions (W x H x D): 440 x 162 x 463 mm - Weight 14 kg

Allen & Heath Xone:23C The Xone:23C brings together the best of digital DJing and conventional mixing in a compact accessible format. This high performance DJ mixer is equipped with a premium quality, 4 stereo channel 96kHz 24bit internal soundcard and offers plug n’ play connection via X:LINK to Xone:K series controllers, making it perfect for performers looking to combine the convenience of digital DJing and recording with the hands-on control and visual appeal of a real mixer. Xone:23C includes an enhanced version of the legendary Xone filter with resonance control, VCA faders, 3 band total kill EQ, illuminated switches, crossfader curve selector and styling inspired by the flagship Xone:DB4. FEATURES At the heart of the mixer is the renowned analogue Voltage Control Filter (VCF) system offering Low-Pass and High-Pass filters, frequency sweep and ‘mild to wild’ resonance control. There is also an FX loop to connect to third party FX units, which route back in through the filter system. Xone:23C features 2+2 stereo channels with dual levels for phono and line inputs, allowing four music sources to be connected at the same time, including turntables and CD/media players. Additionally, the internal soundcard enables replay and recording from DJ software, offering users all the benefits of digital DJing whilst using hands-on mixer controls. The main mix output and mic input are on professional standard balanced XLR’s, and there is a dedicated record output. The Xone:23C is equipped with comprehensive monitoring facilities, including a dedicated booth output with its own volume control, a cue mix control, and signal levels clearly displayed on the 9 segment peak hold meters. Styled on the flagship Xone:DB4, the Xone:23C includes soft touch, backlit controls, light-piped meters and a distinctive new shaped steel faceplate. The mixer can also be upgraded with the latest Innofader for enhanced scratch performance, available as an accessory. *Requires reconfiguration of internal jumpers. 4 STEREO CHANNEL USB SOUNDCARD 96kHz 24bit 4 stereo channel USB soundcard which enables replaying and recording from your chosen DJ software, offering digital DJing with a real mixer. USB X:LINK X:LINK provides power and MIDI data over ethernet connection to our Xone:K Series controllers, saving USB ports on computers and offering extended software control. VCF FILTER SYSTEM At the heart of the mixer is the renowned analogue Voltage Control Filter (VCF) system offering Low-Pass and High-Pass filters, frequency sweep and ‘mild to wild’ resonance control. There is also an FX loop to connect to third party FX units, which route back in through the filter system. EXTERNAL FX LOOP Seamlessly integrate your favourite external FX unit into your setup with send and return connections plus FX loop switching. 3 BAND TOTAL KILL EQ Both channels feature 3 band EQ Isolator, allowing you to creatively eliminate frequencies and bring them back into the mix with complete control. • 4 stereo channel 96kHz 24bit internal soundcard • X:LINK for plug n' play connection to Xone:K series controllers • 2 channels with dual phono/line inputs • VCF Filter system -- low-pass + high-pass filters plus frequency and resonance controls • 3-band true total kill EQ • External FX loop • Mic input on balanced XLR, with 2-band EQ • Balanced main mix out on XLR • Independent booth out • Record out • 3.5mm and 1/4" headphone outputs • Touring grade build quality • Super smooth VCA channel faders • User changeable crossfader • Innofader compatible • Crossfader curve switch • 20dB pro standard headroom • Ultra low distortion • 2mm Steel face plate • 9-segment signal level monitoring

Nagra VII - 2 Channel Universal Digital Audio Recorder with Time Code + Nagra Leather Case Seven TC: Stereo digital recorder, 24/192 with AES 42 and internal 16GB memory delivered with: Battery box and charger, power supply, QCTCU time code cable and instruction manual. In great working and cosmetic condition, like new! Technical specification   RECORDING Internal storage:  Micro SD Flash memory card Removable media:  SD Flash memorycard Disk format:  FAT 16 / 32 Recording Method:   Linear digital PCM, optional:MPEG 1 layer II File type:   16 / 24 bit Broadcast Wave File BWF (WAV) A/D & D/A:  24 Bit Sigma Delta Bit rates:  32 kbits/s up to 384 kbits/sec Tracks: 2 individual Sampling Rate:  44.1, 48, 88.2, 96, 176.4 and 192kHz Recording capacity:   1hr at 24 bit 48 kHz per GB of memory Pre-recording buffer: Programmable Display:  Color LCD touchscreen Level meters:  On colour display   INPUTS Digital input:   XLR 3-pole / AES 42 Analogue inputs:   2 x XLR Microphone (Dynamic, +48V Phantom) / line Mic. input sensitivity: 2.8, 10 and 40 mV/Pa selectable Mic. input noise:  Uin Limiters:   On microphone inputs Line input sensitivity: Adjustable from -6 dBm up to +24 dBm for 0 dBFS recording THD at 1 kHz:  2.8mV Mic Frequency response:  Mic, 10Hz – 75 kHz (+0 – 3dB), Line 10 Hz – 90 kHz (+0 -1dB) (measured on AES out) Signal-to-noise ratio: >110 dB ASA “A” Input level adj. range: 42 dB Mic and from -6 to +24 dB Line Input filters: LFA Internal microphone: On the front panel Crosstalk: Mic >70dB: Line > 110dB   OUTPUTS Analogue line output: XLR 4.4V max (+15 dBm) Crosstalk:  >110 dB Signal-to-noise ratio: >100 dB Digital output: XLR AES-3 (24 bit or 16 bit) THD+N:   Frequency response:  10 Hz – 75 kHz (+0-3dB) Headphones:  Stereo 6.3mm (¼”) Jack 50 Ω Internal speaker:  0.3W   OTHER USB: Micro AB connector M/S Decoder:  Switchable Ethernet:  RJ 45   GENERAL Dimensions:    165 x 175 x 65mm (W x H x D) (Incl. battery box) Weight:   800g (1.75 lbs) (Incl. battery pack) Power supply: External 15V Power Consumption:  Approximately 5W Charge time: Approximately 3 hours Battery life: >5 hours Relative humidity:  From 10% to 99% (non condensing)

Vends DSP Symetrix Jupiter 8. Jamais utilisé encore dans sa boîte neuf. Il est vendu chez Thomann au prix de 1200 euros Détails produits B-Stock, Symetrix Jupiter 8, 8x8 Audio DSP Prozessor with 8x analogue Mic-/Line Inputs and 8x analogue Line Outputs (Terminal Blocks); Sample Rate: 48 kHz; Frequency Response: 20Hz-20kHz +/- 0.5 dB; Dynamic Range: >110 dB, (A-Weighted)); THD+N:

-  Excellent Meridian 566 DA Converter Very good condition and works perfectly Performance 24-bit dynamic range Linearity: better than >–96dBFS Jitter for 44.1kHz sampling, typically 1ps rms Inputs and outputs 3 phono digital inputs; 32kHz–48kHz 1 AES/EBU XLR digital input; 32kHz–48kHz (Parallel with D1) 1 Toslink optical input; 32kHz–48kHz All digital inputs accept up to 24-bit precision Audio outputs 4V nominal balanced (XLR) and 2V unbalanced Construction Twin PLL; word-aligned for lowest jitter Absolute Phase control Precision Class A discrete audio amplification Analogue de-emphasis network High quality construction including use of partitioned 4-layer PCB, and precision capacitors. On-board control microprocessor with non-volatile memory. Full 500 Comms for system integration with Meridian components. Rear-panel control for: Power On/Off Front-panel controls and indicators for: Inputs (D1, D2, D3, Optical), Phase, Emphasis Dimensions 88mm (3.46in) H, 321 (12.64) W, 332 (13.07) D – Weight 5kg (10lbs) Possibility to connect to 110 volts by changing the fuse (see last photo)

AMPTASTIC / ampli intégré audiophile en classe D  La référence à moins de 120 €  Parfait état, livré avec alimentation 12 V d'origine BANC D'ESSAI ANGLAIS: A few years ago this forum was ablaze with Mini-T amp hyperbole. Probably just another passing fad I assumed yet it is clear that there are many who love these diminutive boxes.  So as a brief background I recently had a pair of Combak Bravo standmount speakers and was searching for an amplifier to pair with them. A £6k speaker surely deserves an amplifier with a similar price tag? Well in my initial search I decided, just for fun to try a £60 Muse Mini-T with the Combak’s. The results were surprisingly impressive yet my head kept saying  ‘This makes no sense’. I’m not saying that this was the ultimate combo but the Muse was doing an amazing job considering especially with its reproduction of vocals. It was around that time that I started reading about the new Amptastic Mini-1 so I contacted the company to see if I could have one for review. Chris at Amptastic was happy to oblige but due to the initial demand by the time my review sample arrived I had moved the Bravos on. Anyway other speakers are available as they say. So the Mini-1 is rated up to 20W per channel and based on the familiar TA2020 chipset. On the front we have a push button on/off switch which has a tiny blue LED alongside to indicate power  plus a volume knob. I particularly like how clean and attractive the front panel with no unsightly logo on display. The rear consists of a single pair if RCA analogue inputs and some nice quality speaker connectors along with a power input for use with the supplied 12V power supply. For most of my listening I used the variable outputs of a QUAD 99CDP. This gave me full control of the volume via its remote and also access to streaming via the Quad’s digital inputs. To give me some sort of reference I initially listened to the Muse amp with the Quad through my 87db Gershman Avant Gardes. To be honest I didn’t think either amp would be able to drive the Gershmans to any sort of decent level. I was wrong. The Muse did a fair job but KD Lang’s  ‘If I Were You’ from the ‘All You Can Eat’ album sounded a bit messy. The bass was ill defined and lightweight. A few tracks more showed more of the same.  So switching to the Mini-1 and straight away the bass was far better defined and more in balance with the rest of the track. The music had an altogether more cohesive feel. In fact what struck me throughout all my listening is just how balanced it was. The highs and mids are refined enough to give the impression that you are listening to something with a higher price ticket and the bass was surprisingly good for an amplifier of this type. I also tried the Mini-1 with my 90db sensitivity Heco Celan 300 stand mount speakers. Again the results were impressive with the Mini-1 providing more than enough power to run at decent volume levels. As well as running the Mini-1 as a simple integrated it can be configured for use as a power amplifier. This is done by removing the front volume knob and rear bolts in order to slide the main board out of its case and change a couple of jumper settings. While you have the board out you can also disable the front panel blue LED if you wish. Clear instructions are included in the user ‘manual’ or should I say ‘sheet’ and although I did not attempt this it looks a simple enough operation. The Mini-1 (or any amplifier of this type) will not be for everyone, the single input alone will count many out also possibly the lack of remote control but looking at the Mini-1 purely on its sonic virtues and price tag this might be one of the best ways to invest your £99 out there. Recommended to users of: Marantz Luxman Audiomat Nagra Vincent Theta Sim Audio ISEM Arcam Denon Pioneer Nakamichi B&O Yamaha Cambridge Cabasse Triangle McIntosh Teac  Audioquest Ca

BSS Omnidrive FDS-366T Main Features: - 3 inputs and 6 Outputs for maximum flexibility in one rack space. - New NTM™filters give even better system performance - Hi-Spec 24-bit converters give a dynamic range in excess of 112dB. - 96kHz Sample rate. - Stereo Digital Input (44.1/48/88.2/96kHz AES) as well as three analogue inputs. - New DSP algorithms for absolute phase matching. - Alignment Assistant takes care of your driver delay settings, automatically. - Dynamic Equalisation on every input and output. - Freely assignable EQ filters – put eq where you need it. - Contact closure program recall. - Output transformer options. - RS-232, RS-485 and MIDI control options.

A21SE Stage Two Phono Amplifier There are two dedicated phono amplifiers in the Sugden range and both are borne from our passion for vinyl. The Stage Two offers exceptional value for money with facilities to cater for both MM and MC cartridges. The design is a two box system separating the power supply from the amplifier. The phono amplifier has fixed loading for MM and 100 and 470 Ohm selection for MC. Our design criteria was to produce a product that was as neutral as possible, retaining a faithful and enjoyable analogue sound. A21SE Stage Two Phono Amplifier NEW IN BOX, on stock, ready to ship. Retail price:599€ Facilities Inputs                                      Moving magnet, Moving coil                                                LTVS power in Outputs                                  Fixed line level output Gain Adjustment                    Internal selection for MM or MC Load Adjustment                    Internal for MC 100 and 470 Ohms                                                MM fixed load 47k Earth Terminal                       Screw type External Power Supply          Mains powered Specifications Input Sensitivity                      MM 3.0mV MC 0.15mV Output                                    350mV Frequency Response            +/-1.5dB 20Hz-20kHz Signal to Noise                       >64dB Gross Weight  (packed)        2kgs Dimensions                           Phono amplifier 60 x 140 x 77mm (hwd)                                               Power supply 50 x 140 x 77mm (hwd) Visit My Facebook: M&LaMusique Instagram: Cheam.Khaut.Ming Whatsapp: +33663082521

Platine cd kenwood L1000d. Weight: 15 kg Dimensions: 44 x 13,1 x 38,7cm Technically superlative. Two power trafos, magnetic rails drive, select and discrete componentry throughout, 70µ boards, copper shielding with added bus bars, stabilized loading tray (à la CDP-R1a or CDP-R3) and really balanced analogue circuit with transformer-balanced XLR outputs. The d/a section is made of two chips (unknown) working in tandem at 4x oversampling with an elaborate sample/hold section but without Noise Shaping which Kenwood called New DPAC; signal is transmitted through stages by way of opto-couplers. Laser-wise, the L-1000D sports a Sony KSS-152A set within a custom-ised loading assembly; total size is 44 x 13,1 x 38,7cm and weight 14kg. There are two versions of the L-1000D which can be spotted easily: one has a round LED protruding next to the "pause" scripting, the other has the two "play/pause" LEDs encased in the play/pause button. I don't know if there were other differences, inside, such d/a, drive or KSS... Nudies of the L-1000D here.

The MS300 is a CD player, CD recorder, hard-disk server and Internet radio all in one. The front sports the controls you expect on any CD player plus extras for record, select, favorites, guide, source and radio plus four navigation buttons. The back is more crowded since it's the communications interface for other equipment. An IR connection makes it possible to communicate wirelessly with the MS300. An adjacent SLINK receptor opens up a world of CD-changers for connection. For digital outputs, the MS300 sports coaxial and Toslink. A pair of RCA connectors handle analogue output. Le MS300 est un lecteur de CD, un enregistreur de CD, un serveur de disque dur et une radio Internet tout en un. L’avant arbore les commandes que vous attendez sur n’importe quel lecteur de CD plus des extras pour enregistrer, sélectionner, favoris, guide, source et radio plus quatre boutons de navigation. L’arrière est plus encombré car c’est l’interface de communication pour d’autres équipements. Une connexion IR permet de communiquer sans fil avec le MS300. Un récepteur SLINK adjacent ouvre un monde de changeurs de CD pour la connexion. Pour les sorties numériques, le MS300 sport coaxial et Toslink. Une paire de connecteurs RCA gère la sortie analogique. Avec télécommande et clavier Prix Neuf 5000€ Ordinateur interne ESCIENT en panne.