And battery

Here is a cool japanese Sharp MD-St55 minidisc player Lens and battery compartment cleaned, the unit works flawlessly ! Sold with new battery and USB battery charger.

[Excellent+++] Nikon D7000 with 18-105mm VR Kit with box and battery. État : Used The camera and lens are excellent condition. It comes with charger, battery, the 18-105mm VR lens (Nikon), original box, lens purse and hood.  I am selling it because it does not suit my way of taking photos since I switched to film.

Sony Mz-e520 Portable Minidisc Player with New Battery And Battery Charger.

Atomos S2H Specs Inputs1x 3G/HD/SD-SDI (supports embedded audio)Outputs1x HDMI (supports embedded audio) 1x 3G/HD/SD-SDI loop output (supports embedded audio)Firmware UpdatesVia USB portSupported Formats1080i60, 1080i59.94, 1080i50, 1080p30, 1080p25, 1080p24, 1080p23.98, 1080p30 (60i), 1080p25 (50i), 1080p24 (60i), 1080p23.98 (60i), 720p60, 720p59.94, 720p50, 480i, 576iProcessingPulldown Removal: 25PsF (50i) to 25p 30PsF (60i) to 30p 24p (as 3:2-60i) to 24p Pulldown Insertion: 25p to 25PsF (50i) 30p to 30PsF (60i) 24p to 24p (as 3:2-60i)Battery LifeInternal battery: up to 2 hours Included 7.4 V 2600 mAh battery: up to 12 hours Optional 7.4 V 5200 mAh battery: up to 22 hours Optional 7.4 V 7800 mAh battery: up to 32 hours Key Features - Converts SDI Input to HDMI Output - SDI Loop Output - Supports Resolutions Up to 1080i60/50 - 1-Hour Internal Battery - 10-Hour External Battery Included - Stackable with Additional Units - Performs 3:2 / 2:2 Pulldown Removal - Test Pattern Generator / Audio Test Tone - Perfect Fit with Atomos Recorders - Fits Any Device with NP-Series Plate The Atomos Connect S2H Converter with 2600mAh Battery converts an SDI input to an HDMI output and SDI loop output in resolutions up to 1080i60/50. Connect S2H is battery-powered -- it features an internal one-hour battery and comes with a 10-hour external NP-series battery. It also supports higher capacity 7.4V NP-series batteries for up to 32 hours of power. Multiple Connect S2H and Connect H2S units can be vertically stacked together and powered by one battery attached to the topmost unit. Connects are designed for a perfect fit with Atomos Recorders but can fit any device that has a NP-series battery plate. An AC power supply is included for charging the internal battery and can charge up to three Connect units simultaneously. In addition to conversions, Connect S2H also performs 3:2 / 2:2 pulldown removal and includes a test pattern generator and audio test tone. In the Box - Atomos Connect S2H Converter with 2600mAh Battery - 2600mAH Battery for Atomos Monitors/Recorders and Converters - AC Power Supply for Charging Battery

Rare Icom IC-P4E UHF handy transceiver + new battery pack This is a rare UHF version of Icom transceiver/monobander for the 70cm band. It worksvery well and has lot of features accessibles via Menu (+/- Offset for repeaters, DTMF call, Momories, real time clock, 1750Hz tone, battery savings etc.) This radio has a great sensivity (I have compared with a desktop rig). I had no problem to hear and also to work the local repeater on the "Low" power setting. The battery cells has been replaced with new NiMH rechargeable batteries. This was a cost of 30 eur. They are in new condition.   You can buy for this series of radios new battery packs  or even a battery case for 6 AA rechargeable cells (sold 14eur on).  I sell without charger and antenna (any UHF 70cm antenna with BNC connector will fit). A protective cap is missing on the Squelch control. The visual condition is quite good, especially the front. Minor scuffs on the back. See photos. Low shipment fee by national post with parcel tracking (14 eur). Shipping to Europe and other places (ask for details).  Place where I will ship from can vary, because I have two homes.

Rare Icom IC-P4E UHF handy transceiver + new battery pack This is a rare UHF version of Icom transceiver/monobander for the 70cm band. It worksvery well and has lot of features accessibles via Menu (+/- Offset for repeaters, DTMF call, Momories, real time clock, 1750Hz tone, battery savings etc.) This radio has a great sensivity (I have compared with a desktop rig). I had no problem to hear and also to work the local repeater on the "Low" power setting. The battery cells has been replaced with new NiMH rechargeable batteries. This was a cost of 30 eur. They are in new condition.   You can buy for this series of radios new battery packs  or even a battery case for 6 AA rechargeable cells (sold 14eur on).  I sell without charger and antenna (any UHF 70cm antenna with BNC connector will fit). A protective cap is missing on the Squelch control. The visual condition is quite good, especially the front. Minor scuffs on the back. See photos. Low shipment fee by national post with parcel tracking (12 eur). Shipping to Europe and other places. Custom duties can apply if shipped outside Europe. Place where I will ship from can vary, because I have two homes.

CB3-3769-000 | Canon EOS 40D Support pile date heure / Date Time Battery holder Support pile date heure Canon EOS 40D Date Time Battery holder Click on the flag to read English description ! Support pile date / heure Canon EOS 40D La pile n'est PAS fournie ! Référence: CB3-3769 Compatible: Canon EOS 40D Etat de fonctionnement: Parfait. Etat de présentation: Grade B, traces d'utilisation normale. Difficulté d'installation: simple nécessitant des outils adaptés et/ou le démontage partiel de la machine Objet livré tel que sur la photo, garanti 30 jours à compter de la date de réception. Après réception de votre paiement, expédition du lundi au vendredi. Soigneusement emballé, cet objet sera expédié par: Expédition le jour même si paiement reçu avant midi sinon expédition dans les 24h, informations de suivi par internet communiquées, livraison 48h* après dépôt en bureau de poste. * Les délais de livraison sont donnés à titre indicatif et sont soumis à légère variation. Un renseignement ? N'hésitez pas à me contacter ! www.macdid.fr / materiel@didgar.fr / 06 14 60 08 76 Retours: - l'acheteur dispose d’un droit de rétractation de 14 (quatorze) jours à compter de la date de réception du produit. L'acquéreur s’engage à me contacter au plus tôt et à me retourner - durant ce délai - le produit dans son emballage d'origine et dans l'état dans lequel il a été acquis. Après inspection du produit retourné, vous serez intégralement remboursé à l'exception des frais de retour qui resteront à votre charge. Le droit de rétractation ne peut pas s'exercer dans les cas suivants: - produit vendu à un professionnel - produit vendu HS ou pour pièces - produit déballé, utilisé ou endommagé suite à un montage hasardeux. L'intégralité des Conditions Générales de Vente est disponible ici. Dear European customers ! The estimated delivery date provided by is FALSE !!! I use an international shipping service with tracking and delivery against signature. It's a bit expensive but it's super safe ! Shipping within 24 hours or same day if I receive your payment before noon, I'll give you the tracking link. The disadvantage of this service is that it can be relatively slow. Between 5 to 15 working days but for sure you will receive your item. If you leave me a feedback, the system will ask you if you have received your item during 's estimated period. If you answer "no", I'll be penalized (delayed delivery) while I offer a good quality service which is super safe. Think about it before adding your feedback. If you don't agree with my shipping method, simply don't buy. Thank you for your confidence. Canon EOS 40D Date / Time Battery holder NO battery provided ! Part Number: CB3-3769 Compatible: Canon EOS 40D Working order: Perfect working order. Cosmetic conditions: Grade B, may have light scratches. Mounting difficulty: easy to replace but specific tools needed, you might need to disassemble the machine. Delivered as pictured, warranty 30 days from the date of receipt. After receiving your payment, shipping from Monday to Friday. Well packaged, your item will be shipped by: International Registered Mail. It's slow but cheap and safe (signature required). Delivery between 5* and 15* BUSINESS days, shipping same day if I receive payment before noon else in 24 hours, I give you the tracking informations as soon as I have them. Signature required to get your packet. * Delivery times are indicative only and may vary. You need more information ? Do not hesitate to contact me ! www.macdid.fr / materiel@didgar.fr / 06 14 60 08 76 Returns: - Returns are accepted during 14 (fourteen) days after reception of the parcel. The buyer must contact me and return the product - during this period - in the same conditions as it was sold. After inspection of the returned

Roland Juno-106 61- Completely overhauled and restored This JUNO 106 has been meticulously disassembled, cleaned inside and out, completely overhauled and systematically tested several times over a long period of time to make sure it performs exactly as it should. We are perfectionists and we do not cut corners, details of the operations - PSU and memory Replacing the power supply capacitors Replacing the two-pin Roland plug with a normal IEC plug (computer type) Removal of the old battery, installation of the battery holder and installation of the new CR2032 type battery - Panel Board New slider dust kit Replacement of all the touch panel switches, 34 new switches Dismantling of all slip pots, cleaning, checking the values, replacing if necessary with new sliders and greasing. - Voice Board Dipped in acetone to loosen the black layer on the 80017A The voices 80017As are soldered into SIP socket One voice has been remplaced for a are new Analogue Renaissance one - Jack board Replacement of IC Chorus MN3009 by originals - Calibration Recharge factory patches Calibrated in test mode Checking all jacks - Cosmetics Degreasing the panel and cleaning the buttons - Customer power supply Synthesizer in 120V or 240V on demand - Shipping Buyers should contact us for the exact price of shipping to their country; the price quoted here is only an approximation. We take the maximum precaution to send you your synthesizers. For this, we use custom double-layered cardboard boxes, we cut polystyrene sheets that we come and place inside the boxes. The synthesizer is wrapped in bubble wrap and wedged between the polystyrene plates. The manuals are shipped in double plastic envelopes. Everything is closed with thick tape and the package is marked with “Fragile”, “Top” and “Bottom” stickers. The package is collected from us and shipped to you in less than 3 days in Europe, 10 days for the rest of the world. We specialize in high quality and fully repaired vintage second hand analog synthesizers, keyboards and other devices. We are professionals and musicians. We know our material inside out and treat our customers with honesty and respect.

Lot minidiscs and accessories, recently pulled from storage. Comprises the following (all briefly tested and working, unless otherwise noted with >): Kenwood DMC-P33 x 2, good condition Kenwood DMC-P55, good condition Kenwood remote for above Sharp MD-DP700 speaker cradle (no AC required) Sharp remote for above Sony MZ-NH900 cradle Panasonic SJ-MJ57/58/59/500 speakers (no AC required) Panasonic remote for above (also fits SJ-MJ100) AA battery box for above x 2 2.5mm > 3.5mm patch cable Sony RM-MC11EL   > control behaviour sometimes erratic Panasonic remote   > controls work, but LCD broken Sharp remote   > untested Sony battery box (DC in) Sony battery box Sharp battery box Panasonic battery box Panasonic battery box   > poor connection (clean terminal) Kenwood DMC-V55   > powers up, can't read disc Kenwood DMC-Q77   > powers up, can't read disc (front panel DMC-T55) Sony RM-MC33EL   > seems OK, though volume control rather sensitive loads of NiMH batteries, boxes   > untested, assumed dead loads of disc labels Shipped from France. If you do have any questions then please drop me a line. *** Lot Minidisques et accessoires, récemment retiré du stockage. Comprend les éléments suivants (tous brièvement testés et fonctionnels, sauf indication contraire avec >): Kenwood DMC-P33 x 2, bon état Kenwood DMC-P55, bon état Télécommande Kenwood pour ci-dessus Station d'accueil Sharp MD-DP700 (pas de secteur requis) Télécommande Sharp pour ci-dessus Socle Sony MZ-NH900 Haut-parleurs Panasonic SJ-MJ57/58/59/500 (pas de secteur requis) Télécommande Panasonic pour ci-dessus (convient également au SJ-MJ100) Boîte de piles AA pour ci-dessus x 2 Câble de raccordement 2,5 mm > 3,5 mm Sony RM-MC11EL   > comportement de contrôle parfois erratique Télécommande Panasonic   > les commandes fonctionnent, mais l'écran LCD est cassé Télécommande Sharp   > non testé Boîtier de batterie Sony (entrée DC) Boîtier de batterie Sony Boîtier de batterie Sharp Boîtier de batterie Panasonic Boîtier de batterie Panasonic   > mauvaise connexion (borne propre) Kenwood DMC-V55   > s'allume, impossible de lire le disque Kenwood DMC-Q77   > s'allume, impossible de lire le disque (face avant DMC-T55) Sony RM-MC33EL   > semble OK, bien que le contrôle du volume soit plutôt sensible beaucoup de piles NiMH, des boîtes   > non testé, supposé mort beaucoup d'étiquettes de disques Expédiés de la France. Merci de demander si vous avez des questions.

Bronica SQ-Ai external battery pack. This is sold for parts or repair, as it seems to be working intermittently. There's a hint of a previous battery leak on one of the terminals, but this has been cleaned up. The battery compartment also has some splits in the plastic, but it still holds the batteries OK. It seems to be unreliable, sometimes it works fine, sometimes it doesn't seem to be providing power, so there is possibly a loose connection. Takes 4 x AA batteries, not included.  I often have similar or compatible items for sale, see my other items for details. Please contact me via messages if you have any questions, I’m happy to give advice. Livraison en France Cet article sera livré par Relais Mondial Relay ou Colissimo Recommandé, selon votre sélection à la caisse.  International shipping I can ship this item to any location listed in the postage section of this listing. It will be sent tracked by Colissimo, UPS or Relais Mondial Relay depending on the item and destination. International delivery from France will usually take approximately five to seven working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. UK delivery/Brexit UK buyers please be aware, due to Brexit there may be delivery delays and import duties payable from now on. Any duties must be paid by the buyer. Items will be sent tracked by UPS or Colissimo, depending on the size/value.  I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Genuine Canon CP-E2 Battery Pack for Speedlite Tested and fully working in excellent condition. It improves flash recycle times significantly and increases the number of firings before batteries need to be replaced. This version accepts six "AA" size batteries; lithium, alkaline, as well as rechargeable NiCd's or NiMH. It is compact and can be attached to the tripod mount under the camera or worn on your belt using the soft case provided. I'm also selling separately a 550EX Speedlite which is compatible with the battery pack. Compatible flash units: 580EX, 550EX, 540EZ, 430EZ, MT-24EX and MR-14EX This item include: - CP-E2 battery pack - Tripod mount screw - Soft case - Original instructions (batteries are not included) Please see my other items as I'm selling a load of my equipment.

The Canon CG-A10 Battery Charger is a dual charger for Canon BP-A30 and BD-A60 batteries, both compatible with the Canon EOS C300 Mark II Professional Camcorder. With the Canon CG-A10 Battery Charger, you can charge two batteries simultaneously, saving you a lot of time and always having enough power for your camcorder. The charger has two indicator lights, so you can be sure the batteries are charged. Main features of the Canon CG-A10 battery charger Charger for Canon BP-A30 and BD-A60 batteries Specially for Canon EOS C300 Mark II Professional Camcorder Possible to charge two batteries at the same time Weight: 755g Canon CG-A10 Battery Charger Le chargeur de batterie Canon CG-A10 est un chargeur double pour les batteries Canon BP-A30 et BD-A60, tous deux compatibles avec le caméscope professionnel Canon EOS C300 Mark II. Avec le chargeur de batterie Canon CG-A10, vous pouvez charger deux batteries simultanément, ce qui vous fait gagner beaucoup de temps et vous permet de toujours disposer de suffisamment d'énergie pour votre caméscope. Le chargeur a deux voyants, vous pouvez donc être sûr que les batteries sont chargées. Caractéristiques principales du chargeur de batterie Canon CG-A10 Chargeur pour batteries Canon BP-A30 et BD-A60 Spécialement pour le caméscope professionnel Canon EOS C300 Mark II Possible de charger deux batteries en même temps Poids: 755 g

    iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:     Item Description Remarks Inputs/Outputs     Inputs (rear) USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in) Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible)   Intelligent SPDIF® Coaxial 3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM   SPDIF Optical         Outputs (rear) Audio RCA L+R     Intelligent SPDIF® Coaxial Up to 192kHz PCM       Output (right side) SmartPower® Socket Fast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A             Controls     Controls (front)     - HP Output Audio 6.3mm Headphone Jack   - Volume with Power On/Off switch Precision analogue volume control - 3.5mm Input   Auto disable the digital section when this is in use - X-Bass® On/Off   - 3D Holographic Sound® On/Off Auto-switching for Speakers® and Headphones® (two separate and distinct circuits)       Controls (left side)     - Power Mode Turbo, Normal, Eco Computer controlled power and gain scaling - Polarity Normal/Inverted   - Filter 3 positions, 6 filters (see filter section below)       Controls (bottom)     - Line Direct/Preamplifier Preamplifier function Enable/Disable, 0/9dB gain selectable Fixed 2V or variable with up to 5V available - iEMatch® Perfect-matching circuit for IEMs (eliminate hiss) Off / High Sensitivity Headphone / Ultra Sensitivity Headphone             DAC section     DAC Dual-core DSD, DXD, PCM DAC by Burr Brown 2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR   Bit-Perfect DSD processing, Bit-Perfect PCM processing         Clock Ultra low jitter GMT computer controlled Femto Clock RMS jitter 12kHz – 1MHz       Audio Formats DSD 512/256/128/64 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 All native decoding, no internal hardware conversion   DXD 2x/1x 768/705.6/384/352.8kHz All native decoding, no internal hardware conversion   PCM 768/705.6/384/352.8/192/176.4/96/88.2/ 48/44.1kHz All native decoding, no internal hardware conversion       Filters     - PCM Bit-Perfect Processing/Minimum Phase/Standard Digital filters selectable - DSD Extreme/Extended/Standard Range Analogue filters selectable - DXD Bit-Perfect Processing Fixed analogue filter             Specifications (DAC Section)     Dynamic Range (Line) >117db(A)   THD & N (0dBFS Line)   Output Voltage (Line) >2V   Output Impedance (Zout)   Jitter (correlated) Below AP2 test set limit               Headphone Power Output     HP Amp Output Power (max) Power (continuous.) - Turbo mode 10.0V/4,000 mW @ 16 Ohm >1560 mW @ 64 Ohm - Normal mode 5.5V/1,900 mW @ 16 Ohm >950 mW @ 32 Ohm - Eco mode 2.0V/500 mW @ 8 Ohm >250 mW @ 16 Ohm             Specifications (Headamp Section)     Dynamic Range (HP) >115dB(A) (Eco Mode, 2V Out)   THD &N (HP 500mW/16R)   Output Voltage (HP) >8V (Turbo Mode)   Output Impedance (Zout)   Maximum Output Power 4,000mW @ 16 Ohm Load when using sinewave testing the iDSD micro may engage protection circuits Continuous Output Power 1,000mW @ 64 Ohm Load  

Sony MZ-E510 Minidisc Player (spares repair, AA battery use only) A somewhat worn but functional MDLP player from Sony, this is listed as spares/repair as it does not work using an internal NiMH (gumstck) battery. However it does work just fine using the AA battery caddy, so may still be of some use... Please note that the back is particularly worn and the legends for the buttons (group, vol +/-, play, >, stop) can't be seen any longer. There are no other accessories, just the items pictured, but if you do have any questions or need more information then please drop me a line. The post is only just returning to normal here, and so there may still be problems shipping to some countries. If in any doubt, or if your location is not listed, please get in touch and I'll check.

The Bebob Engineering V190 Lithium-ion V-mount Battery offers an output voltage of 14.8 V and a storage capacity of 13 Ah. Housed in a strong unbreakable cover, the V-mount battery has a maximum load capacity of 7 A and is equipped with a 5 LED voltage display. The lithium-ion battery weighs 2.97 lb (1.35 kg) and takes approximately 6 hours to charge completely.

iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:   Item Description Remarks Inputs/Outputs   Inputs (rear)USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in)Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible) Intelligent SPDIF® Coaxial3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM SPDIF Optical    Outputs (rear)Audio RCA L+R  Intelligent SPDIF® CoaxialUp to 192kHz PCM   Output (right side)SmartPower® SocketFast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A       Controls   Controls (front)  - HP OutputAudio 6.3mm Headphone Jack - Volume with Power On/Off switchPrecision analogue volume control DAC section   DACDual-core DSD, DXD, PCM DAC by Burr Brown2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR Bit-Perfect DSD processing, Bit-Pe

Minolta 9000 +grip Power Md 90 + Battery NP 90M Excellent. État : "Occasion" Service de livraison : Colissimo minolta 9000 serial number: 14104349 MD serial number: 61002730 NP 90M serial number: 61002730 he Minolta 9000 AF is a professional Single-lens reflex autofocus camera, introduced by Minolta in August 1985.[1] It was both Minolta's and the world's first professional autofocus SLR. It was called Minolta Maxxum 9000 in the US and Minolta α-9000 in Japan. As the first professional autofocus SLR system ever made, the Minolta 9000 AF sports of number of unique features showing the transition from electro-mechanical cameras to the next generation of fully electronic cameras. For instance, it is the only autofocus system ever made with a manual film transport rather than automatic electronic winding. OverviewType35mm SLRLensLens mountMinolta A-mountFocusingFocusTTL phase detecting autofocusExposure/meteringExposureProgram, Aperture priority, Shutter priority and manual exposure; center-weighted and spot meteringFlashFlashHot shoe and PC-socketGeneral 53×92×139 mm - Type: Fully automatic SLR camera body (exception: manual film advance) made of aluminium, brass and steel. - Manufacturer: Minolta - Year of launch: 1985 - Film: DX-coded 35mm film with speeds from 6 to 6400 ASA - Lens mount: Minolta A-mount - Focusing: TTL phase detecting autofocus - Shutter: Aluminium focal plane shutter with speeds 30 sec. to 1/4000 sec. - Metering: TTL through combined ambient and flash metering cells located at the bottom of the mirror box (therefore, not influenced by the focusing screens used), center-weighted or spot-metering metering characteristics for ambient light, center-weighted for flash light - Exposure: Program controlled mode, manual mode, aperture priority or shutter priority mode - Flash: PC-socket plus TTL-enabled hot shoe for Minolta AF-flashes, shutter synchronized for speeds up to 1/250 sec. - Finder: Pentaprism finder, diopter correction, 94% coverage at 0.81x magnification - Display: LCD displays on body and in the view finder - Film advance: Manual lever and rewind crank, add-on winder (2fps, manual rewind) and motordrive (5fps, motorized rewind) units available - Weight: 645 g (1.422 lb) - Dimensions: 53×92×139 mm

Fully restored Sony WM-R2 It is in fully working order and fully serviced This Walkman is the recording and late version of the WM-2 range, the center gear was replaced there is NO more clicking The Walkman was completely disassembled, cleaned from old oil and grease and re-lubricated New drive belt  New center gear New rewind gear  New counter belt New pinch roller  Speed and head azimuth calibrated  All electrolytic capacitors were replaced with high grade Nichicon Great audio quality Head demagnetized Battery compartment is very clean, no acid leak Battery cover is present Does NOT come with protective case The player is in good condition, considering its age, see pictures Some scuffs and scratches are present For collectors and ready to be used daily See my other Walkmans auctions I repair and restore all kind of Walkmans, feel free to ask any questions Paypal only Free Shipping

Profoto Pro7B  1200w  battery generator in good cosmetic and perfect working condition +  ProB head in great condition with glass dome diffuser,cap,250w modeling light great  complete flash kit for  location/studio.ready to go kit,don't need other than camera  battery w/cassette and charger+long syncord  too. feel free asking for infos and pics. Tx

used Profoto complete lighting kit.Pro7B2  (Pocket Wizzard radio receiver built in) battery generator in used condition and perfect working.  selling with charger, battery with cassette (working but can't garanted life).Universal power adaptater (booster) w/ main lead (Uk or Euro plug) 2x Pro7b heads   (complete w/ glass dome and caps) 1 modeling light seem doesn't work, i'll try to find another new for the sale. i could add second (heavy) battery need recell if u pay extra shipping cost Tx.

used Profoto complete lighting kit . Pro7B2  (Pocket Wizzard radio receiver built in) 1200j battery generator in used condition and perfect working.  selling with worlwide charger, battery/ cassette (working but can't garanted life). Pro b heads x2   (complete w/ glass dome and caps). extension for head (16'). Profoto bag (used but do the job fine). reflectors (zoom+ disc) i could add second (heavy) battery need recell if u pay extra shipping cost Tx.

Varta Energy Micro AAA Alkaline Battery (24-Pack) WE LOVE TECHNOLOGY Varta Energy Micro AAA Alkaline Battery (24-Pack) FEATURES Description du produit Varta Energy Les piles VARTA sont pour une utilisation quotidienne standard pour les périphériques, tels que les télécommandes, horloges murales, réveils et beaucoup plus. Plus d'endurance avec besoins énergétiques normaux. Le bon choix pour une charge permanente dans le bas de gamme actuelle. Il offre une longue durée de vie grâce à la qualité alcaline moderne.VARTA „Energy“ devrait être utilisé principalement dans les appareils avec les exigences actuelles constants, par exemple. dans les télécommandes, détecteurs de fumée, des horloges, des calculatrices, des balances électroniques. Ingrédients aa alkaline Pour application simple avec besoin faible en énergie Très bonne valeur pour l'argent Pour application simple avec besoin faible en énergie Très bon valeur pour l'argent Date limlite de consommation 5 ans Contenu du packaging 24 Dimensions 1,05 x 1,05 x 4,45 cm Alcaline Pour application simple avec besoin faible en énergie Endurance emballage fraicheur, ouverture facile télécommande,torche,horloge Description de la pile AAA_(Micro) width: 0 x height: 0 x length: 0 x weight: 0 PAYMENT We accept payments through PayPal, contact us to check the availability of other payment methods SHIPPING Items located in our US warehouse will be Shipped FREE to all addresses other than APO/PO boxes in the lower 48 states via USPS or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24 hours of your payment being processed. Items located in our China warehouse will be shipped out by Air Mail to your PayPal Address within 1-3 business days after receiving your cleared payment (estimated delivery time 10-25 business days, this all depends on how busy the postal system is & by varying countries inbound customs delays). We offer free shipping worldwide (some countries are excluded). Please note that delivery time for some countries might take longer than 30 business days. Tracking number will be provided once available from our shipping partner. Please contact us if you don't receive your item by 30 business days, we will check the status and try our best to resolve any problems for you. Please note that import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to determine what these additional costs will be prior to bidding/buying, Thank you. DELIVERY & RETURN POLICY Return shipping is the buyer's responsibility unless the return is a result of our mistake. We will pay for shipping replacement back to you if an exchange is requested

Vends lot de 2X caméra Sony PMW-EX1 + accessoires: Etat d'occasion mais tout est fonctionnel - 2 Caméscopes PMW-EX1     -PMW-EX1 1757H de tournage     -PMW-EX1 399H de tournage - 3 cartes mémoires 8Go sony SxS Pro SBP-8 (25 min en HD) - 4 Adaptateurs Sonnet SxS vers SDHC Expresscard permet l’enregistrement sur carte SD HC de 32 Go - 2 Chargeurs de batterie Sony BC-U1 (position chargeur ou alimentation) - 2 Batteries Pro-X XP-L60 UD (14,4V - 60 Wh) - 1 Batterie Swit S-8U62 - 1 Batterie Sony BP-U30 (2600 mAh) - 1 Alimentation Sony AC-NB12A AC Adapter - 1 Télécommande Sony RM-F300 Le PMW-EX1 est un caméscope Full HD compact multiformat: Réglage NTSC Mode HQ: 1920 x 1080/59.94i, 29.97P, 23.98P, 1280 x 720/59.94P, 29.97P, 23.98P Mode SP: (en mode 1440 x 1080/59.94i) Réglage PAL Mode HQ: 1920 x 1080/50i, 25P, 1280 x 720/50P, 25P Mode SP: 1440 x 1080/50i Doté d’une prise BNC HD-SDI, vous pourrez relier votre caméra à une régie ou une carte d'acquisition Optique Grand angle Fujinon 3 capteur CMOS Exmor 1/2 L’appareil propose une résolution de 1920 (H) x 1080 (L),   offrant par la même occasion une sensibilité et une profondeur de champ excellentes. Pour minimiser l'effet de flou provoqué par le tremblement de la main, le nouvel objectif intègre une fonction de stabilisateur optique offrant des images d'une stabilité incomparable. 3 bagues séparées dédiées au Zoom, au focus et l'iris. Enregistrement sur carte dédié SxS ou carte SD HC avec les 4 cartes adaptatrices fournies ------------------------------------------------------------------- Sell ​​set of 2 X Sony PMW-EX1 camera + accessories: Used condition but everything is functional - 2x PMW-EX1 Camcorders -PMW-EX1 1757H of turning -PMW-EX1 399H of turning - 3 Sony SxS Pro SBP-8 8GB memory cards (25 min in HD) - 4 Sonnet SxS to SDHC Expresscard adapters allow recording on 32 GB SD HC card - 2 Sony BC-U1 battery chargers (charger or power supply position) - 2 Pro-X XP-L60 UD batteries (14.4V - 60 Wh) - 1 Battery Swit S-8U62 - 1 Sony BP-U30 battery (2600 mAh) - 1 Sony AC-NB12A AC Adapter power supply - 1 Sony RM-F300 remote control The PMW-EX1 is a compact Full HD multi-format camcorder: NTSC setting HQ mode: 1920 x 1080 / 59.94i, 29.97P, 23.98P, 1280 x 720 / 59.94P, 29.97P, 23.98PSP mode: (in 1440 x 1080 / 59.94i mode) PAL setting HQ mode: 1920 x 1080 / 50i, 25P, 1280 x 720 / 50P, 25PSP mode: 1440 x 1080 / 50i Equipped with a BNC HD-SDI socket, you can connect your camera to a control room or an acquisition card Fujinon wide-angle optics 3 1/2 Exmor CMOS sensorThe camera offers a resolution of 1920 (H) x 1080 (L), offering at the same time excellent sensitivity and depth of field. To minimize the blurring effect caused by hand shake, the new lens incorporates an optical stabilizer function providing images of unparalleled stability.3 separate rings dedicated to Zoom, focus and iris.Recording on a dedicated SxS card or SD HC card with the 4 adapter cards supplied

Here is a beautiful Sony MZ-E707 Minidisc Walkman in mint condition MDLP, G-Protection type R Cleaned and serviced, battery compartment and lens cleaned Sold with New Battery & USB Battery Charger.

Fujifilm VPB-XT2 vertical battery grip for Fujifilm X-T2, in excellent working and cosmetic condition. Electronic contacts cover. Serial number 6DQ02076. Made in China. This battery grip has been used sparingly and with great care by myself. The AC cable is a European round two-pin plug. ******************************************************************************************************************************************************** N.B. Please be aware the successful bidder is liable to pay import customer duties, although I shall declare this a used item and gift, unless you provide me with different instructions. ******************************************************************************************************************************************************** En savoir plus

Canon LC-E17E battery charger. I am selling a Canon LC-E17E battery charger with a 1m power cord. This charger is for Canon LP-E17 batteries, which are used for the Canon EOS 250D, 800D, 77D, M3, M5, M6, RP, R100, R50, R10, R8 cameras among others. The charger works well and I am only selling it since I have replaced it by a USB charger. The charger has no scratches or damage (see photos). Please note that I am selling the charger without battery, without box, and without manual. Je vends un chargeur de batterie Canon LC-E17E avec un cordon d’alimentation de 1 m. Ce chargeur est pour les batteries Canon LP-E17, qui sont utilisées pour les appareils photo Canon EOS 250D, 800D, 77D, M3, M5, M6, RP, R100, R50, R10, R8, entre autres. Le chargeur fonctionne bien et je le vends uniquement parce que je l’ai remplacé par un chargeur USB. Le chargeur n’a pas de rayures ou de dommages (voir photos). Veuillez noter que je vends le chargeur sans batterie, sans boîte et sans manuel. En savoir plus

Fully restored Aiwa HS-J101 AM / FM / Radio Cassette Recorder with Equalizer It is in fully working order It was completely disassembled, cleaned from old oil and grease and re-lubricated New belt installed  Head demagnetized  All electrolytic capacitors were replaced with high end Audio Grade from Nichicon which gives a very good and powerful sound Battery compartment is very clean, no acid leak Holder for standard battery AAA is included All LED's are working Very good FM reception Protective case included There are some minor scratches on front door and back cover The player is in very good condition considering its age For collectors and ready to be used daily See my other Walkmans auctions Paypal only Free shipping

Here we have a beautiful MD-2 motor drive for the F2 (with the battery check gauge rather than the light), along with the MB-1 battery pack. Unfortunately, I do not have the two MS-1 battery caddies that go in the MB-1, so you will need to provide those to actually use the motor drive.  This is sold as working even though I cannot test it.  Be sure to check out my other sales. I can combine shipping to reduce your costs. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- About Camera Sanctuary: Like you, I love cameras. I bring all manner of equipment into the Camera Sanctuary in the hope that I can place it in a new home. I handle everything from collector’s pieces to total beaters, Leica to Lomo, Alpa to Argus. You can buy from me secure in the following: - My descriptions are honest. Some cameras have been babied, and some have been brutalized. There’s room in the world for both, but I won't try to sell one as the other. - I won’t pretend I don’t know things. - I’ll take back anything that doesn’t meet your expectations.

A vendre ce kit  Profoto Pro7B avec batterie et chargeur + Pro7 Head 4800w ventilée,complète avec dome  diffuseur en verre,capot de transport et lampe pilote 250w ensemble  d'occasion en bon état correct cosmétiquement et parfait fonctionnement   kit flash complet avec cable synchro long et zoom  réflecteur (pas sur photo) Power pack 1200w utilisable aussi bien sur batterie que sur prise secteur avec chargeur pour recyclage   For sale is Profoto Pro7B in good condition with good battery/cassette (work fine but can't garanted life) and international charger + Pro7 Head fan cooled with glass dome,cap,4800w flash tube and 250w modling light Feel free asking for infos and pics.Tx

SONY BC-M50 Battery Charger --> 2* disponible, vendu a l'unité. --> la vente comprend uniquement ce qui est sur les photos. N'hésitez pas à nous faire une offre de prix, nous sommes ouvert à toute proposition *********************************************   Power requirements 120V,60Hz (for US & Canada) / 100 to 240V, 50/60 Hz(except for USA & Canada) Output 16.8V DC, 2.2A (For charging Li-ion Battery pack) 20V DC, 1.8A (For charging NiMH battery pack) Power Consumption Approx 49W Operating Temperature 0oC to 40oC Storage Temperature -20oCto 60oC Operating/Storage Humidity 5% to 90% RH Dimensions (w/h/d) 60x191x130mm Mass (Approx.) 1.1kg Charge System Constant voltage and current charge system with timer stop system