Antenna swr

Antenna SWR Power Meter cb RADIO PWR FWD REF japan VINTAGE Parfait état de marche

avec cable COMME PHOTOS Consultez mes autres objets !!! N’oubliez pas de m’ajouter à votre liste de favoris !

Description N1201SA UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Description: The N1201SA Series Vector Impedance Analyzer is a portable instrument primarily used to test antenna, RF device impedance, and board impedance. The instrument has a built-in large-capacity lithium battery, which is compact and easy to carry. It is more convenient for outdoor and high-altitude special operations. The instrument display interface and keys are clear and simple, easy to use and easy to operate. Main Features: ① Wide Frequency Range: N1201SA: 137.5 MHz to 2700 MHz; N1201SA P: 34.375 MHz to 2700 MHz ② Small Size: 9 * 10 * 2.8 (cm); light weight (net weight): 240g ③ Built-in  2000mAH polymer lithium battery, continuous working time more than 4 hours. ④ High Resolution,4 significant figures (single point measurement). ⑤With Calibration function, accurate measurement is guaranteed. ⑥ Cost-effective. Specification: Frequency: 137.5MHz～2700MHz Frequency Steps: 1kHz LCD: 2.4 Inch TFT 320×240(QVGA) Battery Capacity: 2000mAH(7.4Wh) Power Consumption: Charging Current: 400mA Charging Interface: Mini USB；Micro USB (Two interface only act as charge port Automatic Power-Off: Settable (Always Power-On, 5 minutes to 60 minutes optional) Measurement Parameters: Resistance，Reactance，VSWR，s11 Resolution: 4 digits Frequency Accuracy: RF Connector: SMA-K Scan Points: 280 RF Output Level: -18dBm Operating Temperature: 5℃～40℃ Atmospheric Pressure: 860hPa～1060hPa S11(dB)measurement range: 0dB~-60dB Measurement Range Impedance Measuring range frequency frequency>1.3GHz(Absolute value of impedance) VSWR frequency frequency >1.3GHz Error (single-point measurement) Impedance Test conditions Z Z 1.3GHz S11（dB/°） 0dB～-10dB -10dB～-20dB -20dB～-40dB VSWR 2 Directivity(After calibration) 137.5MHz/34.375MHz～2GHz 2GHz～2.7GHz Package List: 1X N1201SA UV RF Vector Impedance ANT SWR Antenna Analyzer Meter 1X USB Cable

sans chargeur ! The VC-300D is similar to the  VC-300DLP, but it has a 21 segment bargraph display that makes analyzing SSB power easy. LED meter shows peak reading and has fully adjustable level and delay controls. You can tune any real antenna from 1.8 to 30 MHz, including all MARS and WARC bands. Use verticals, dipoles, inverted vees, yagis, quads, long-wires, whips, G5RVs, etc. Has 4:1 balun for balanced line antennas. Handles up to 300 Watts SSB PEP, 200 Watts continuous (150 Watts on 1.8 MHz). The VC-300D backlit Cross-Needle Meter displays SWR, forward and reflected power simultaneously. Reads both peak and average power on 30/300 Watt scales. Meter lamp has front panel switch and uses 12 VDC or 110 VAC with AC-12 adaptor (not Inc.) The VC-300D either position antenna switch lets you select two coax fed antennas, random wire/balanced line or built-in dummy load for use through your tuner or direct to your transceiver. Bypass position bypasses your tuner but keeps your SWR Power meter in line. A built-in 50 Ohm dummy load makes tuning up your rig easy! Use it for testing and repairing your rig, setting power level adjusting your mic gain and more. The finest components available and the highest quality construction gives you the best 300 Watt tuner that you can buy.  DL-650M IT, DUMMY LOAD, 1500W, 0-650 MHZ $79.95  each  LP-30 LOW PASS FILTER, 1500W $89.95  each  VEC-131K KIT, AIRCRAFT RECEIVER $29.95  each  VEC-621 TUNER, 2M/220 MHZ ANTENNA TUNER $89.95  each

MFJ-259C SWR HF/VHF SWR Analyzer 530 kHz - 230 MHz Antenna. Condition is "Used". Shipped with USPS Priority Mail. This comes as originally purchased from the manufacturer, meaning that it has a battery compartment on the back but does NOT come with any coax or other cables.

antenne mobile professionnelle VHF/UHF NAGOYA S-45 (B) black NEUVE Produit original Fréquences:  TX: 140-150 / 430-460 Mhz  (2 mètres / 70 cm) RX: 100-180 / 300-480 MHz Longueur: 45 cm Poids total: 300 grammes Type: 1/4 onde (VHF) - 1/2 onde (UHF) Gain: 2,15/5,5 dB (VHF/UHF) Polarisation verticale Impédance: 50 Ohms Puissance: 100 Watts Couleur noire Connecteur PL (SO 239) SWR: Fabriquée au Japon Clé de serrage du brin fournie professional mobile antenna VHF / UHF NAGOYA S-45 (B) black NEW Original product Frequencies: TX: 140-150 / 430-460 MHz (2 meters / 70 cm) RX: 100-180 / 300-480 MHz Length: 45 cm Total weight: 1 lb Type: 1/4 wave (VHF) - 1/2 wave (UHF) Gain: 2.15 / 5.5 dB (VHF / UHF) Vertical polarization Impedance: 50 Ohms Power: 100 Watts Black color PL Connector (SO 239) SWR: Made in Japan Clamping wrench supplied

antenne mobile professionnelle VHF SIRIO SKB 140-175 NEUVE Fréquence: 140-175 Mhz (2 mètres) Longueur: 55 cm Poids total: 500 grammes Type: 1/4 onde Bande passante: 12 Mhz Gain: 0-1 dB Polarisation verticale Impédance: 50 Ohms Puissance: 100 Watts Couleur noire SWR: Base étanche type "FME" Longueur de câble: 4.5 m SANS connecteur Perçage: 19 mm Fabriquée en Italie Mode d'emploi en anglais et italien fourni Accessoires de montage fournis professional mobile antenna VHF SIRIO SKB 140-175 NEW Frequency: 140-175 Mhz (2 meters) Length: 55 cm Total weight: 2 lbs Type: 1/4 wave Bandwidth: 12 Mhz Gain: 0-1 dB Vertical polarization Impedance: 50 Ohms Power: 100 Watts Black color SWR: Waterproof base type "FME" Cable length: 4.5m WITHOUT connector Drilling: 19 mm Made in Italy Instructions in English and Italian provided Supplied mounting accessories

Dîpole à bobine MALDOL AH-C21 NEUF Option pour AH-R (antenne  télescopique) Fréquence: 21,53 à 22,16 Mhz (15 mètres) Type: dipôle 1/4 d'onde Impédance: 50 Ohms Puissance maximale: 10 W (SSB) SWR: 1 Connecteur: BNC Longueur: 15 cm Poids total: 0,1 kilos Fabriqué au Japon Mode d'emploi en anglais fourni dipole  Coil MALDOL AH-C21 NEW Option for AH-R (telescopic antenna) Frequency: 21.53 to 22.16 Mhz (15 meters) Type: 1/4 wave dipole Impedance: 50 Ohms Maximum power: 10 W (SSB) SWR: 1 Connector: BNC Length: 15 cm Total weight: 1 lb Made in Japan Instructions in English provided

antenne mobile professionnelle UHF SIRTEL LT-U2 NEUVE Fréquence: 400-470 Mhz (70 cm) Longueur: 21 cm Poids total: 600 grammes Type: 1/4 onde Bande passante: 7 Mhz Gain: 0-1 dB Polarisation verticale Impédance: 50 Ohms Puissance: 100 Watts Couleur noire SWR: Base étanche type "LT" Longueur de câble: 4.5 m SANS connecteur Perçage: 19 mm Fabriquée en Italie professional mobile antenna UHF SIRTEL LT-U2 NEW Frequency: 400-470 Mhz (70 cm) Length: 21 cm Total weight: 2 lbs Type: 1/4 wave Band width: 7 Mhz Gain: 0-1 dB Vertical polarization Impedance: 50 Ohms Power: 100 Watts Black color SWR: Waterproof base type "LT" Cable length: 4.5m WITHOUT connector Drilling: 19 mm Made in Italy

antenne mobile professionnelle VHF SIRTEL TORNADO NEUVE Fréquence: 130-175 Mhz (2 mètres) Longueur: 56 cm Poids total: 500 grammes Type: 1/4 onde Bande passante: 9 Mhz Gain: 0-1 dB Polarisation inclinée Impédance: 50 Ohms Puissance: 250 Watts Couleur noire  inox SWR: Base type "E" Longueur de câble: 4.5 m SANS connecteur Perçage: 13 mm Fabriquée en Italie professional mobile antenna VHF SIRTEL TORNADO NEW Frequency: 130-175 Mhz (2 meters) Length: 56 cm Total weight: 2 lbs Type: 1/4 wave Bandpass: 9 Mhz Gain: 0-1 dB Inclined polarization Impedance: 50 Ohms Power: 250 Watts Black color stainless steel SWR: Base type "E" Cable length: 4.5m WITHOUT connector Drilling: 13 mm Made in Italy

antenne mobile professionnelle VHF/UHF DIAMOND NR-770S NEUVE Produit original Fréquence: 144-430 Mhz (2 mètres / 70 cm) Longueur: 45 cm Poids total: 300 grammes Type: 1/4 onde (VHF) - 1/2 onde (UHF) Gain: 2,15 dB (VHF/UHF) Polarisation verticale Impédance: 50 Ohms Puissance: 100 Watts Couleur argent Connecteur PL (SO 239) SWR: Fabriquée au Japon professional mobile antenna VHF/UHF DIAMOND NR-770S NEW Original product Frequency: 144-430 Mhz (2 meters / 70 cm) Length: 45 cm Total weight: 1lb Type: 1/4 wave (VHF) - 1/2 wave (UHF) Gain: 2.15 dB (VHF / UHF) Vertical polarization Impedance: 50 Ohms Power: 100 Watts Silver color PL Connector (SO 239) SWR: Made in Japan

antenne mobile professionnelle VHF SIRTEL LT-4 NEUVE Fréquence: 144-174 Mhz (2 mètres) Longueur: 54 cm Poids total: 600 grammes Type: 1/4 onde Bande passante: 9 Mhz Gain: 0-1 dB Polarisation verticale Impédance: 50 Ohms Puissance: 100 Watts Couleur noire SWR: Base étanche type "LT" Longueur de câble: 4.5 m SANS connecteur Perçage: 19 mm Fabriquée en Italie professional mobile antenna VHF SIRTEL LT-4 NEW Frequency: 144-174 Mhz (2 meters) Length: 54 cm Total weight: 2 lbs Type: 1/4 wave Bandwidth: 9 Mhz Gain: 0-1 dB Vertical polarization Impedance: 50 Ohms Power: 100 Watts Black color SWR: Waterproof base type "LT" Cable length: 4.5m WITHOUT connector Drilling: 19 mm Made in Italy

antenne de balcon VHF SIGMA Universal 144 NEUVE Fréquence: 144-146 Mhz (2 mètres)  Type: 1/4 onde Impédance: 50-52 ohms SWR: environ 1,2 à 145 MHz Gain: 2 dB Puissance maximale: 100 watts Longueur total: 80 cm (2x radians de 38 cm + 1x brin de 55 cm) Poids total: 600 grammes Connecteur: PL (SO 239) Possibilité d'une installation horizontale ou verticale Fabriquée en Italie VHF balcony antenna SIGMA Universal 144 NEW Frequency: 144-146 Mhz (2 meters)   Type: 1/4 wave Impedance: 50-52 ohms SWR: about 1.2 to 145 MHz Gain: 2 dB Maximum power: 100 watts Total length:  80 cm (2x radians of 38 cm + 1x strand of 55 cm) Total weight: 2 lbs Connector: PL (SO 239) Possibility of a horizontal or vertical installation Made in Italy

antenne de base VHF-UHF DIAMOND X-200 NEUVE Fréquence: 144-440 Mhz (2 mètres / 70 cm)  Type: 2x 5/8 VHF + 4x 5/8 UHF onde Impédance: 50 ohms SWR: 1,5: 1 Gain: 6 / 8 dB Puissance maximale: 200 watts Longueur total: 250 cm Radians: 3 x 52 cm Résistance au vent: 50 mètres/sec Matériaux: fibre de verre, aluminium anodisé, inox Poids total: 2 kilos Connecteur: N Fabriquée au Japon Mode d'emploi en anglais et japonais fourni Fixations fournies VHF-UHF base antenna DIAMOND X-200 NEW Frequency: 144-440 Mhz (2 meters / 70 cm)   Type: 2x 5/8 VHF + 4x 5/8 UHF wave Impedance: 50 ohms SWR: 1.5: 1 Gain: 6/8 dB Maximum power: 200 watts Total length: 250 cm Radians: 3 x 52 cm Wind resistance: 50 meters / sec Material: fiberglass, anodized aluminum, stainless steel Total weight: 5 lbs Connector: N Made in Japan Instructions in English and Japanese provided Fixings provided

antenne mobile professionnelle HF DIAMOND HF-40-FXW NEUVE Produit original Fréquence: 7-7,2 Mhz (40 mètres) Longueur: 140 cm Poids total: 500 grammes Type: 1/4 onde Gain: 3 dB Polarisation verticale Impédance: 50 Ohms Puissance: 200 Watts Connecteur PL (SO 239) SWR: Fabriquée au Japon professional mobile antenna HF DIAMOND HF-40-FXW NEW Original product Frequency: 7-7,2 Mhz (40 meters) Length: 140 cm Total weight: 2 lbs Type: 1/4 wave Gain: 3 dB Vertical polarization Impedance: 50 Ohms Power: 200 Watts PL Connector (SO 239) SWR: Made in Japan

Zetagi TM-999 CB SWR Meter & Matcher 100W Antenna Tuner TM999. État : Occasion

ZETAGI TM535 ANTENNA MATCHER AND SWR POWER METER. État : Occasion

COMET CHA-250B Vertical base antenna for 6m-80m, 24ft. Condition is "Used". Shipped with UPS Ground. This is a good antenna. I think tge location close to the house and the house being so tall is not helping my signal. I also purchsed a 1500 watt amp and thats no goung to work on this antenna. The swr seems a bit high. So it migh need adjusting. I never got it working on 40 or 80. If you know anything about antenna this might be perfect. With a good tunner it should be good? All reviews are good and great hoa antenna too.

DIAMOND Antenna SX-600 SWR & Power Meter Bon état de fonctionnement N'hésitez pas à me contacter si vous souhaitez des photos ou informations supplémentaires Arrivages réguliers, visitez notre boutique et ajoutez nous a vos vendeurs favoris ENVOI PAR MONDIAL RELAY (France, Belgique, Luxembourg) Livraison au point relais le plus proche de chez vous, avec suivi en temps réel et assurance Envoi rapide et sécurisé, les frais d'assurance et d'emballage sont compris dans les frais de port Envoi par colissimo sur demande MONDIAL RELAY EUROPE   (Germany, Netherland, Austria, Spain, Italia, Portugal) Low cost shipping with delivery at home with tracking and insurance included WORLDWIDE SHIPPING

Dîpole à bobine MALDOL HMC-18C NEUF Option pour HMC-6S Fréquence: 18 à 18,168 Mhz (17 mètres) Type: dipôle 1/4 d'onde Impédance: 50 Ohms Puissance maximale: 120 W (SSB) SWR: 1 Longueur (avec HMC-6S): 140 cm Poids total: 0,5 kilos Fabriqué au Japon Mode d'emploi en anglais et japonais fourni et clé de serrage pour le brin  optionnel dipole  Coil MALDOL HMC-18C NEW Option for HMC-6S Frequency: 18 to 18.168 Mhz (17 meters) Type: 1/4 wave Impedance: 50 Ohms Maximum power: 120 W (SSB) SWR: 1 Length (with HMC-6S): 140 cm Total weight: 1 lb Made in Japan Instruction manual in English and Japanese provided and tightening wrench for optional strand

Dîpole à bobine MALDOL HMC-10C NEUF Option pour HMC-6S Fréquence: 10,1 à 10,15 Mhz (30 mètres) Type: dipôle 1/4 d'onde Impédance: 50 Ohms Puissance maximale: 120 W (SSB) SWR: 1 Longueur (avec HMC-6S): 180 cm Poids total: 0,5 kilos Fabriqué au Japon Mode d'emploi en anglais et japonais fourni et clé de serrage pour le brin  optionnel dipole  Coil MALDOL HMC-10C NEW Option for HMC-6S Frequency: 10.1 to 10.15 Mhz (30 meters) Type: 1/4 wave Impedance: 50 Ohms Maximum power: 120 W (SSB) SWR: 1 Length (with HMC-6S): 180 cm Total weight: 1 lb Made in Japan Instruction manual in English and Japanese provided and tightening wrench for optional strand

Vintage Portable Mobile Lafayette 99-2537 SWR & Field Strength Meter w/Antenna. Condition is "Used". Has not been tested. Shipped with USPS Priority Mail.

Pyramid SWR-14 SWR & Power Meter Strength 10 Watts & 100 Watts, working.  Missing the field strength antenna. Condition is "Used". As is, no returns. Shipped with USPS Priority Mail.

Antenne President Bazooka pour balcon, en parfait état. Sans plan de masse Ondes 1/2 Impedance 50 ohm Frequence 26-28 MHz Polarisation verticale TOS 1:1,1 Gain +2DBI Puissance en crete 500 PEP 93 cm En fibre Description: NO GROUND PLANE ANTENNA. TYPE 1/2 WAVE, IMPEDANCE 50 OHM, FREQUENCY RANGE 26-28 MHZ, POLARIZATION VERTICAL,  SWR 1:1,1,  GAIN +2 DBI, TRANSMISSION POWER 500 PEP,  BAND WIDTH 2400 KHZ (240 CHANNELS),  WHIP LENGTH 36.6",  MATERIAL FIBERGLASS.

Perfect cosmetic and electronic condition, famous multifunction S parameter instrument. It works over the medium wave up to 180 MHz. It comes complete of it’s own original box and original manual, power cable and coaxial adapter. Digital and analog clear readout of the parameters. Do no hesitate to ask any other question. MFJ 259 B Antenna Analyzer, C, X, Q, L,Distance To Fault, SWR, Frequency Meter,. État : Occasion

NanoVNA 50KHz-900MHz HF VHF UV Vector Network Antenna Analyze+LCD ZH Description:    Manual download   Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 900MHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50535-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.   This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 500mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.           Basic performance:   ● PCB: 54mm x 85.5mm x 11mm (without connectors, switches) ● Measurement frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware) ● RF output: -13dbm (maximum -9dbm) ● Measurement range: 70dB (50kHz-300MHz), 60dB (300M-600MHz), 50dB (600M-900MHz) enable extended firmware); ● Port SWR: ● Display: 2.8 inch TFT (320 x240) ● USB interface: USB type-C communication mode: CDC (serial) ● Power: USB 5V 120mA, built-in 300mAh or 500mAh battery, maximum charging current 0.8A ● Number of scanning points: 101 (fixed) ● Display Tracking: 4   ●  Marking: 4   ● Setting Save: 5   ● Measuring S parameters, voltage standing wave ratio, phase, delay, Smith chart...     Package list:   1X NanoVNA host (with 500mAh battery)   1X USB Type-C data cable  

Ceci est un produit de bricolage avec fonction de mesure de réseau vectoriel. Il comprend un écran tactile de 2,8 pouces, une mesure TX / RX, peut déterminer tous les paramètres S11 et S21. Si vous devez obtenir les modèles S12 et S22, vous devez remplacer manuellement le câblage du port de l'émetteur-récepteur. Fonctionnalités: Le logiciel de contrôle PC peut exporter des fichiers Touchstone (snp), qui peuvent être utilisés pour divers logiciels de conception et de simulation radio. L'algorithme de fréquence amélioré peut utiliser l'extension harmonique impaire de si5351 pour prendre en charge la fréquence de mesure jusqu'à 900 MHz. C’est principalement pour l’étude des clients qui peuvent bricoler, vous devez préparer vous-même le câble SMA. Il n'a pas de bouclier métallique. Le principal avantage est que les utilisateurs très expérimentés peuvent ouvrir la machine pour visualiser la structure du circuit. Toutefois, lorsque vous mesurez des fréquences supérieures à 300 M, il est facile d’être perturbé par d’autres signaux. Ce produit est donc recommandé pour apprendre les principes et l’utiliser à des fréquences plus basses. La plage de fréquences 50k-300MHz de la sortie directe si5351 offre une dynamique supérieure à 70dB. La bande étendue 300M-600MHz fournit une dynamique supérieure à 50 dB, et la bande 600M-900M est supérieure à 40 dB de dynamique. Petit et portable, facile à utiliser, ce projet vise à fournir un gadget RF mais un instrument utile pour les passionnés. Caractéristiques: Matériel: PCB Couleur blanche Fréquence de mesure: 50KHz ~ 300MHz (50KHz ~ 900MHz, activer le firmware étendu) (les produits seront mis à jour avec le dernier firmware avant l'expédition, la fréquence de mesure réelle est de 50KHz ~ 900MHz) Sortie RF: -13dbm (maximum -9dbm) Précision de fréquence: Plage de mesure: 70dB (50KHz-300MHz), (50dB (300M-600MHz), 40dB (600M-900MHz) permettent le firmware étendu) Port SWR: Affichage: TFT 2,8 pouces (320 * 240) Interface USB: USB type-C Mode de communication: CDC (série) USB: 5V 120mA Batterie: 1 * batterie au lithium, 3.7V, 450mAh (incluse) Nombre de points d'étalonnage: 101 (fixe) Nombre de points de numérisation: 101 (corrigé) Suivi de l'affichage: 4, marquage: 4, réglage de sauvegarde: 5 Taille de la carte: 85.5 * 54 * 11mm / 3.4 * 2.1 * 0.4in (sans connecteurs et commutateurs) Taille de l'emballage: 190 * 100 * 30mm / 7.5 * 3.9 * 1.2in Poids du colis: 139g / 4.9ounce Remarque: Ce produit ne contient pas de câble SMA, vous devez vous préparer. Liste de colis: 1 * hôte 1 * câble de données USB de type C 1 * connecteur SMA femelle à femelle Fashion finds for everyone!

Description:    Manual download   Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 900MHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50535-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic. The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics.   This is a DIY product that provides perfect vector network measurement capabilities in the size of a credit card. It includes a 2.8-inch touch screen and 500mAh battery, which can be used offline for 2 hours. For longer measurement, please connect external power supply or contact me to make a larger battery version. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.           Basic performance:   ● PCB: 54mm x 85.5mm x 11mm (without connectors, switches) ● Measurement frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware) ● RF output: -13dbm (maximum -9dbm) ● Measurement range: 70dB (50kHz-300MHz), 60dB (300M-600MHz), 50dB (600M-900MHz) enable extended firmware); ● Port SWR: ● Display: 2.8 inch TFT (320 x240) ● USB interface: USB type-C communication mode: CDC (serial) ● Power: USB 5V 120mA, built-in 300mAh or 500mAh battery, maximum charging current 0.8A ● Number of scanning points: 101 (fixed) ● Display Tracking: 4   ●  Marking: 4   ● Setting Save: 5   ● Measuring S parameters, voltage standing wave ratio, phase, delay, Smith chart...     Package list:   1X NanoVNA host (with 500mAh battery)   1X USB Type-C data cable   Le 04-avr.-20 à 14:27:06 Paris, le vendeur a ajouté les informations suivantes:

Comes with original box with small antenna for field strength Ham radio or CB I don't think you want to use any more than 100 watts into this