Available for use with

Minolta lens MD 35mm f2.8 excellent condition for use with mirrorless camera. This lens is in very good condition, lens are clean from dust or any fungus, no haze, no oil on the blades, externaly it is really good as well. Supplied with non original front cap and back cap There is however one problem that only makes it suitable for use with modern camera and not with film camera. Aperture change can be slow even though there is no oil on the blade. It works but it is slow. Not an issue on mirrorless but problematic on film camera if you shoot at closed aperture. Other than that this lens is perfect.

Instructions for use ALPA 9d and 9f with brief instructions for use and film test of a Kern Macro-Switar lens - 38 pages in total - Codes  P.S.A.. 1E 5.66 and P.S.A. 664 - 1E - English - 1966 In very good condition Mode d'emploi ALPA 9d et 9f avec mode d'emploi abrégé et film test d'un objectif Kern Macro-Switar  - 38 pages au total - Codes  P.S.A.. 1E 5.66 et P.S.A. 664 - 1E - Anglais - 1966 En très bon état  ALPA 9d and 9f Gebrauchsanweisung inkl. Kurzgebrauchsanweisung + Filmtest eines Kern Makro-Switar Objektives - insgesamt 38 Seiten - Koden  P.S.A.. 1E 5.66 und  P.S.A. 664 - 1E - Englisch - 1966 In sehr gutem Zustand FRAIS D'ENVOI/SHIPPING COSTS FRANCE - Lettre suivie 2,64 € - Other countries (worldwide): 3,00 € priority.mail (no tracking) Réduction sur frais d'envoi en cas d'achat de plusieurs documents / reduced shipping costs for multiple purchases of documents

Ce compendium pare-soleil à soufflet réglable pour les focales de 35 mm à 100 mm est remarquablement efficace sur le full-frame 24x36 et en APSC, fabriqué par Novoflex avec un souci de précision micrométrique exceptionnel. La "deutche Qualität" est vraiment à l'œuvre ici !! L'état du soufflet est excellent. Les vis de réglages sur le rail sont parfaites. Les encoches d'accueil des plaques de filtres gélatine rectangulaires sont efficaces et en parfait état. Il est livré avec une bague adaptatrice pour le diamètre de 55 mm, idéale pour les objectifs Minolta MC-Rokkor et MD. On peut aussi trouver sur le marché d'autres bagues pour d'autres diamètres. Merci de porter attention aux photos. This adjustable bellows lens hood compendium for focal lengths from 35 mm to 100 mm is remarkably effective on full-frame 24x36 and APSC, manufactured by Novoflex with an exceptional concern for micrometric precision. The "deutche Qualität" is really at work here ! The condition of the bellows is excellent. The adjustment screws on the rail are perfect. The reception notches of the rectangular gelatine filter plates are efficient and in perfect condition. It comes with a 55mm diameter adapter ring, ideal for use with Minolta MC-Rokkor and MD lenses. Other rings for other diameters are also available on the market. Please pay attention to the pictures. Translated with www.DeepL.com/Translator (free version)

Zacuto Z-TG-NR  Bought in april 2020, Never used,  condition 10/10 Almost new. In my another posts, You can find Zacuto Dual Trigger Grip Base for complete this system. This is an offer of one grip, please buy two units for use dual hands. Recommended for professional videographer, cinematographer. Key Features - Works with Dual Trigger Grip System - Relocate Left-Side Nucleus Focus Grip - Facilitates 360° Grip Rotation - Durable Metal Construction Use this Nucleus Relocator from Zacuto when working with a Nucleus-M wireless lens controller. It allows you to move your Nucleus handgrip for use with a Zacuto Dual Trigger Grip shoulder rig on its left-side arm. Moving the grip to the rig allows you to use it in a more comfortable location and offers more position flexibility when attached to the 360° rotating Trigger Grip arm. The Relocator is constructed of a sturdy metal. To install, use the screw that comes with the Nucleus handgrip. Zacuto Z-TG-NR Specs Material of ConstructionMetalCompatibilityZacuto Dual Trigger Grip System Nucleus Focus HandgripDimensionsNot Supplied by ManufacturerWeightNot Supplied by Manufacturer

Parfocal lens design maintains focus while zooming The Tokina Cinema ATX 16-28mm T3.0 (Canon EF) is a version of Tokina's wide-angle DSLR zoom lens, re-engineered for video use and capable of producing images suitable for 4K capture. It covers full-frame 35mm image sensors and is a parfocal lens, enabling you to maintain focus throughout a zoom move. The Cinema ATX 16-28mm can open up to a T3.0 aperture throughout its zoom range, eliminating the need for exposure compensation on the tight end of the zoom. The lens design also reduces the breathing and image shifting sometimes encountered while zooming and focusing. The Tokina Cinema ATX 16-28mm employs aspherical super-low dispersion elements for optimal color correction and minimal distortion. Its 9-bladed iris diaphragm produces attractive bokeh in out-of-focus areas. Cinema ATX 16-28mm features include focus, iris, and zoom markings on both sides of the lens barrel, a de-clicked aperture ring for smooth iris pulls, an all-metal housing, and standard gears for use with a follow focus system. A minimum focus distance of just under 1' and an industry-standard 114mm front diameter fitting most matte boxes are additional cine features. Wide-angle T3 manual-focus zoom lens Parfocal lens design maintains focus while zooming Covers full-frame 35mm sensors, images are suitable for 4K capture Reduced breathing and image shifting while zooming or focusing T3.0 aperture can be maintained throughout the zoom range Aspherical, SLD (super-low dispersion) glass elements optimize color correction and reduce distortion De-clicked 9-bladed iris for precise exposure control and attractive bokeh 114mm front diameter is compatible with most matte boxes 11" minimum focus distance allows for wide but close shots Cine-style lens housing is designed for use with follow focus systems Focus, iris, and zoom markings are on both sides of the lens barrel

I sell high quality 3D adapters to use 35mm film in medium format cameras. Type Pentax, Semflex, Rolleiflex, Mamiya, Plaubel, Hasselblad, Makina, Bronica, Fufifilm, Yashica, Contax, ADOX. Just put a pair of these adapters on each side of the film and you get a 135 film with the dimensions of a film 120. I recommend using two pairs to facilitate use and get a better flatness of the film. The effect obtained, according to the medium format format, can be a panoramic impression and the exposure of the notches of the film 135. This also makes it possible to use emulsions existing only in 35mm format in a medium format. I recommend using two pairs for ease of use and better flatness of the film. Sample photo made with a Pentax 6x7. I remain at your disposal for any further information. Price for a pair: 6, 5 € Please contact me if you want to order several devices. Economic shippings from France. INTERNATIONAL BUYER: IF YOU WANT A TRACKING LINK THIS EXTRA SERVICE COST 3,2€. FRENCH POST IS SAFE. Trackink link isn't necessary. Won't be responsible for any lost from your national post. Vends des adaptateurs 3D haut qualité pour utiliser des pellicules 35mm dans des appareils moyens formats. Type Pentax, Semflex, Rolleiflex, Mamiya, Plaubel, Hasselblad, Makina, Bronica, Fufifilm, Yashica, Contax, ADOX. Il suffit d'enfiler sur chaque côté de la pellicule une paires de ces adaptateurs et vous obtenez une pellicule 135 aux dimensions d'une pellicule 120. Je recommande d'utiliser deux paires afin de faciliter l'utilisation et d'obtenir une meilleure planéité du film. L'effet obtenu, en fonction du format de moyen format peut être une impression de panoramique et l'exposition des crans de la pellicule 135. Cela permet aussi d'utiliser des émulsions n'existant qu'en format 35mm dans un moyen format. Je recommande d'utiliser deux paires pour un confort d'utilisation et une meilleure planéité du film. Photo d'exemple réalisée au Pentax 6x7. Je reste à votre disposition pour toute information complémentaire. Prix pour une paire: 6, 5€ Envoi possible en lettre verte à 80cts. Paiement PayPal, Chèque, RIB. argentique, film camera, pentacon, vivitar, leica, helios, pellicule, vintage, objectif, 35mm, film roll, hasselblad, pentax, canon, nikon, m42, monture universel, m39, slr, reflex camera, argentique, camera obscura, pinhole, stenope, pentacon, olympus, voigtlander, moyen format, shutter, flash, kodak, fujifilm, agfa, adox, bergger, tetenal, jobo, ilford, minolta, lens, lenses, mamiya, plaubel, makina, xpan

iFi Audio Pro iESL Headphone Amp for Electrostatic Headphones.  The Pro Series iESL electrostatic headphone amplifier from iFi AUDIO offers transparency and an ultra-wide frequency range. It works with all Stax, Sennheiser Orpheus, and electrostatic headphones. Drive Your Electrostatic Headphones to the Max and Use with a Headphone Amp: iFi Pro iESL Energizer Charges Your 'Phones, Supplies Needed Extra Voltage, Yields Incredible Transparency Drive your electrostatic headphones with the iFi Pro iESL Electrostatic Headphone Energizer and experience the phenomenal transparency, ultra-wide dynamics, and natural musicality for which the style is renowned. Offering perfect bias, impedance, and termination matching with every electrostatic ‘phone around, Pro iESL paired with a high-end headphone amplifier supplies the proper extra-high-tension voltage required by electrostatic headphones – something conventional amplifiers cannot offer. Pro iESL "energizes" the electrostatic plates in your ‘phones, giving them the power they need to operate at peak potential. A hand-wound permalloy core transformer, capacitive battery supply, and bias voltage generator do the work so all you have to do is listen to what you've been missing. iFi Pro iESL is the flagship your electrostatic need and deserve. 100% Music Direct Guaranteed. Please note: iFi Pro iESL is strictly for use with electrostatic headphones and needs to be paired with a headphone amplifier. Maximum Output voltage:   640V RMS (16Ω/20V in)  320V RMS (64Ω/20V in) Frequency Response: 5Hz-50kHz (-3dB) Input Voltage (Pro iESL): 5V-9V/1A max Input Voltage (iPower): AC 85-265V, 50/60Hz Power Consumption: < 1W Dimensions (DWH): 8.4" x 8.1" x 2.5" Weight: 5.5 lbs.  Bought in 09/2019 - Mint Condition -  Sold with full set of accessories and original box.  Still under Manufacturer Warranty (IFI Audio)

Item Description Enhance your guitar's performance with Ibanez Locking Bridge Post Screw Studs, offering improved tuning stability, sustain, and precise height maintenance. Enhance Guitar Performance Today Enhance your guitar’s tuning stability and sustain with the Ibanez 2LE2-B Locking Bridge Post Screw Studs. These studs are expertly designed for use with Edge and Edge Pro bridges, ensuring a perfect fit. The effective locking mechanism preserves the bridge height and contact, allowing for consistent performance. Crafted from durable materials, these used studs are in very good condition, promising reliable performance for serious musicians. Elevate your musical experience with these essential components that make a significant difference in sound quality and playability. Key features of our Ibanez 2LE2-B Locking Bridge Post Screw Studs - Enhances tuning stability for better performance. - Improves sustain for longer, richer tones. - Locking mechanism maintains bridge height accurately. - Compatible with Edge and Edge Pro bridges. - Used studs in very good condition for reliable performance. Upgrade Your Sound with Our Ibanez 2LE2-B Studs! Invest in the Ibanez 2LE2-B Locking Bridge Post Screw Studs to elevate your guitar’s capabilities. Experience the benefits of enhanced tuning stability and improved sustain, along with the security of a locking mechanism. Don’t miss out on this opportunity to upgrade your guitar! Item Condition: Pre-Owned Item Location: FR Warehouse – Marseille SKU: JS-EDGE-LSTUDS My Global Reach Stay connected through my official website and social media for the latest updates and exclusive offers. The account JakeSpecial is my main store where I specialize in selling PDAs, refurbished computers, and a curated selection of retro and vintage tech. As a renowned top-rated seller, I am dedicated to providing a top-notch shopping experience. Additionally, I invite you to explore JakeSpecial_Global, my new global account, where you'll find a unique collection of Hobbies b'&' Toys, MOC Brick Sets, EDC gear, and more. Real-Time Inventory Synchronization Inventory levels are synchronized in real-time between and my website, ensuring stock availability reflects the most accurate and up-to-date information. Fast b'&' Secure Shipping — Global Delivery Options I typically dispatch items within 2 business days for products shipped from my warehouse in Marseille, France, and within 5 business days for products shipped from Hangzhou. Every package comes with a tracking number, and delivery estimates range between 10 to 20 days, depending on your location. My storage facility in Hangzhou allows me to work closely with premier suppliers, ensuring access to the finest quality products at the most competitive prices Follow me Follow me on Instagram to discover my latest finds and promotions. Join the community at @jake.special.official and stay updated with all my new arrivals and vintage tech treasures. Join me on TikTok to explore my latest collections and special offers. Follow my account @jakespecial and never miss an update on my unique vintage tech and special finds. Guaranteed Transparency and Excellence I ensure that all items are presented as accurately as possible in photos and descriptions, with no surprises, hidden issues, or quality compromises. If you have any issues with your purchase, please contact me. Your satisfaction is my top priority. Jake Special — Passion b'&' Unique Expertise I take pride in offering meticulously crafted items, carefully curated by me, Jake, PhD in Mathematics. My extensive business and tech experience, combined with my background in teaching, research, and strategic tech initiatives, ensures the highest standards. Alongside me, Marwa, with her strategic vision and dedication, has been instrumental in building and growing this platform. Together, our expertise and passion for excellence define everything I do, ensuring that each purchase reflects my commitment to quality, pre En savoir plus Collaboration commerciale.

Youtube Premium + YouTube Music - | 1 Mois | |1 Month | Lecture sans interruption Regardez des vidéos sans publicité tout en utilisant d’autres applications ou avec l’écran éteint. Téléchargements Profitez de vos vidéos où que vous soyez, même dans l’avion ou dans les transports en commun. YouTube Music Premium Téléchargez notre nouvelle application pour profiter de votre musique sans interruption. Sans publicité Profitez de YouTube sans publicité lorsque vous vous connectez sur un appareil mobile, un ordinateur ou un téléviseur compatible. Sauvegardez et profitez Vous n’avez pas assez de données mobiles ou vous êtes hors connexion ? Sauvegardez vos vidéos pour en profiter partout. Lecture en arrière-plan Avec YouTube Premium, la lecture de votre vidéo continue en arrière-plan sans interruption, même lorsque vous ouvrez une autre application. YouTube Music Premium Explorez tout un monde de musique sans publicité, hors connexion et même avec l’écran verrouillé. Disponible sur mobile et ordinateur. L’identifiant et le mot de passe sont envoyés par e-mail ou message dans les 24h qui suivent l’achat. au moment de la vente il sera immédiatement mis a votre adresse mail et nom et vous serait le seul propriétaire. (vous changerai vous meme le mot de passe directement pour que personne ne se connecte sur votre compte. nous feront ensemble par mail le changement de propriétaire. n’hésiter a me poser une question si besoin d'info en + _________________________________________________ Youtube Premium + YouTube Music - | 1 month | | 1 Month | Uninterrupted reading Watch ad-free videos while using other apps or with the screen off. Downloads Enjoy your videos wherever you are, even on the plane or on public transport. YouTube Music Premium Download our new app to enjoy your music without interruption. Without advertising Enjoy ad-free YouTube when you sign in on a compatible mobile device, computer, or TV. Save and enjoy Don't have enough mobile data or are you offline? Save your videos to enjoy them everywhere. Background playback With YouTube Premium, your video continues to play in the background without interruption, even when you open another app. YouTube Music Premium Explore a whole world of ad-free, offline and even music with the screen locked. Available on mobile and computer. The username and password are sent by email or message within 24 hours of purchase. at the time of the sale it will be immediately put to your email address and name and you will be the sole owner. you will directly change the password yourself so that no one logs into your account. we will change the owner together by email. do not hesitate to ask me a question if you need more info

Cable length: 46cm/20in. Connectors: Neutrik XLR3F to 3.5 mm stereo 1/8'' elbow TRS plug. Cable: canare cable. Fit For: Turn your RED DSMC camera BRAIN 3.5mm audio input into a standard XLR connection for use with professional XLR microphones.

The NiSi V5 Alpha 100mm Filter Holder is designed to allow for the convenient use of 100mm wide, 2mm thick filters. Use of this filter holder is easily accomplished by first screwing the included NiSi adapter ring for the V5 Alpha 100mm Filter Holder onto a lens with 82mm front filter threads. For lenses with front filter threads for diameters smaller than 82mm, a separately available step-up ring can be installed between the lens and the included adapter ring. After being fitted onto the adapter ring, the filter holder's pull-and-release locking pin helps to provide a reliable, yet adjustable connection that allows the holder to be rotated 360°, permitting the use of graduated neutral density and other filters that are enhanced by varied positioning. The NiSi V5 Alpha 100mm Filter Holder is preinstalled with three pairs of filter slots, a configuration that accommodates three rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter's edges. Contact with a filter's front- or rear-facing surfaces is avoided, particularly when using graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot. This filter holder can be used with a separately available NiSi 82mm Adapter Ring for C4 Cinema Filter Holder Kit and V5 100mm or V5 Pro 100mm Filter Holder Kits instead of its included adapter ring. If used with that separately available adapter ring, along with either a separately available NiSi 86mm Circular Polarizer Filter for Select NiSi Filter Holder Kits or a NiSi 86mm Enhanced Circular Polarizer Filter for Select NiSi Filter Holder Kits, the NiSi V5 Alpha 100mm Filter Holder can help create a filter holder kit that offers the same essential functions as a NiSi V5 Pro 100mm Filter Holder Kit. Adapter rings for lenses with 86mm or 95mm front filter threads are also separately available. The combination of either of those adapter rings with the filter holder cannot accommodate a NiSi 86mm circular polarizer filter; however, a polarization effect can instead be obtained by placing a separately available, 100mm wide, 2mm thick polarizer filter between one pair of the filter holder's slots. Durable aluminum alloy filter holder provides three pairs of filter slots, a configuration that accommodates up to three separately available 100mm wide, 2mm thick filters Each slot is designed to grip an installed filter only along the surface of the filter's edges, avoiding contact with a filter's front- or rear-facing surfaces Use of the filter holder can be easily accomplished by first screwing the included 82mm adapter ring onto a lens with 82mm front filter threads For lenses with front filter threads for diameters smaller than 82mm, a separately available step-up ring can be installed between the lens and the included adapter ring Pull-and-release locking pin on filter holder allows for a reliable connection to the 82mm adapter ring which allows the holder to be rotated 360° Durable and lightweight aluminum alloy construction

Good day,  For sale here,  a Forza AudioWorks Hybrid IEM Cable,  good used condition,  with 2-pin/0,78 L-shaped connectors to your IEM (in-ear-monitor earphone headphone)  and 3,5mm stereo jack-plug.  Very good quality cable, a real upgrade, adds more to your sound,  especially when compared to a stock cable.  Here's a review of it:  - https://www.head-fi.org/showcase/forza-audioworks-hybrid-iem-cable.20111/reviews  Official RSP is €149,  make it yours for much less that price.  About:  The Hybrid Series IEM cables share Forza AudioWorks’ hybrid signature sound – natural tonal balance,  with well extended highs and full bodied lows, with couple of user friendly design features.  All Hybrid Series IEM cables come with ergonomic L-shaped IEM connectors, combined with excellent flexibility of the wire,  just wear it and forget it and simply enjoy the music.  With the bombproof build quality, it is probably the last IEM cable you will buy for a long time…  Specifications:  - High purity, 4 strands of 26AWG cryo 7N UPOCC copper + UPOCC silver in semi-Litz geometry and PE insulation (no more green copper oxide on your wire!).  Blend of the best materials available for superior sound experience and ergonomics. - Highly flexible thanks to custom formulated PE insulation, 56 individual strands in 7 groups and semi-Litz geometry.  With addition of 4x1 braid it is the most flexible Forza AudioWorks cable. - L-shaped plugs: no matter if it is for Shure, Westone or your favorite CIEM – the Hybrid Series IEM comes  with ergonomic connectors for pure pleasure of use. - 4x1 braid for EMI reduction without the need of bulky metal screening braid. - Eye-catching transparent, braided cable design, finished with carbon fiber splitter with Hybrid Series logo.  - Built like a tank, 100% handmade in Poland with meticulous care  Compatible with any monitor that has 2-pin/0,78 connectors.  - Plug Type: 3.5mm stereo jack  - Connector Type: 2-Pin / 0.78  - Cable Length: Around 1.2 m  Condition:  Good used condition, perfectly working.  You'll receive:  - 1x cable  (only the cable, no IEM comes with it).  If you don't know what this lens is about, please ask before your purchase. All sales are final.  Please check my other sales.  Thanks for your time!  ----------  Sale's Conditions  (please read before buying, by placing an order, means you have accepted the followings):  You're buying from a distributor based in EU.  Some sellers saying that they ship from Europe, while they don't. And then unpleasant surprises  from your customs asking 20% or more for import taxes (and big shipping/delivery delays), will appear...  On the rare occasion that something will goes wrong with the item  (in case of warranty for example, if/when this is offered),  you'll contact me and I’ll be there for you to offer you the best and quickest solution.   If you don't know what this item is about, please ask before your purchase.  Be sure of what you're about to purchase, that you have made your research,  you have read reviews about it online, so you're sure you like its character etc....  Otherwise just do not buy from here, as I will definitely NOT accept returns  or any kind of refunds after sale is ended, as item is well described.  Payment:   PayPal is accepted. Immediate payment is required.  Shipping:  Worldwide shipping is available.  Fully insured & signed-for shipping is provided! These options are included in shipping price!  No taxes within EU (European Union)!  Import taxes & fees (if any) are buyers resp

A QUICK AND EASY SOLUTION FOR PROFESSIONAL SUPPORT. The DR-3 “Dr. Rhythm ”allows guitarists and composers to offer very elaborate rhythms to their music. This budget-friendly drum machine features some of the best acoustic and electronic drum sounds created by BOSS as well as a wide selection of bass sounds. Very suitable for improvisation, its rhythmic progressions and variations allow access to any style of music, and the new Total Sound Control DR-3 technology will give your programs real perfection. - Very economical BOSS rhythm machine for study and improvisation - Realistic drum, percussion and bass sounds with velocity-sensitive pads - Rhythmic progressions with 3 variations each (Intro, Verse, Fill and Ending) - TSC function with "Sound Shape" and "Ambience" for professional sound quality - 100 preset styles and 100 user styles programmable in real time or step by step - Pedal connector for foot control. - Battery or mains operation - Rhythmic progressions for instant improvisations If you prefer to spend less time programming and more improvising, the rhythmic progressions of the DR-3 are for you. Simply choose a style from among the 100 Presets available and use the 8 buttons on the front panel to move from one section to another. You can choose between 3 variations for each of the patterns (Intro, Verse, Fill and Ending), so you'll never experience monotony. - Simplified audio corrections and foot control The TSC BOSS (Total Sound Control) system allows you to modify the sound of a complete drum kit by applying specialized effects. The Sound Shape function adjusts the compression and the parametric 3-band equalization or acts on the sound space by the Ambience effect. An optional footswitch allows control of Intro / Start, Ending / Stop, pattern change (Verse, Variation On / Off, Loop On / Off), and battery power lets you take and use your DR -3 almost everywhere. Rhythmic stylesUser Styles: 100, Preset Styles: 100 * 11 patterns for a styleSongsUser: 100, maximum length: 250 patterns per songTSC (Total Sound Control)Preset Patches: 8, User Patches: 8Maximum polyphony12 voicesInstruments Drums and PercussionDrums and Percussion: 120, Basses: 12Resolution96 blackWeather20 to 260 bpmRecording modesReal time / step by stepPads13 (dynamic)ScreenBacklit LCD (2 lines of 16 characters)ConnectorsOutputs: L, R (RCA Phono type), L output (PHONES), R output (MONO) (1/4-inch phone type), Foot Switch input (Stereo 1/4-inch phone type), MIDI IN socket, DC IN jack (AC adapter)FoodDC9V: batteries (R6 / LR6 (AA) type) x 6, AC adapter (PSA series)Consumption200 mA * Battery life in continuous use and on battery power: approximately 5 hours (these measurements may vary depending on battery specifications and conditions of use)Accessoriesbatteries (Alkaline LR6 (AA) type) x 6, Owner's Manual, Roland Service Information SheetOptionsMains adapter: PSA series, Foot pedal: FS-5U, Foot pedal connector: Roland PCS-31LDIMENSIONS AND WEIGHTWidth213 mm 8-7/16 inchesDepth185 mm 7-5/16 inchesHeight53 mm 2-1/8 inchesWeight710 g 1 lbs. 10 oz. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- UNE SOLUTION RAPIDE ET FACILE POUR DES ACCOMPAGNEMENTS PROFESSIONNEL. La DR-3 «Dr. Rhythm» permet aux guitaristes et aux compositeurs d’offrir des rythmiques très élaborées à leur musique. Cette boîte à rythmes économique dispose en effet de certains des meilleurs sons de batterie acoustique et électronique créés par BOSS ainsi que d’u

BOLEX H16 RX with KERN VARIO SWITAR EE 1:2.5 f 18/86 mm   Functional integrated automatic exposure meter and diaphragm !!                                       n ° 135905                           (traduction en français ci-dessous) Condition  of conservation and excellent cosmetic! The drive motor turns freely without problem. This set is fully functional and can be used for filming in 16 mm !! *** Please note that this camera has undergone a revision reflex sight system level! The lenses and prisms have been removed, checked and cleaned! Over time (often several decades) without maintenance the eyepieces and aiming prisms eventually become opaque. The aim becomes blurred and unspecified! (photo 12) Also check and clean the film presser. As well as the feed dog A film test (unimpressed) was performed to verify the correct unfolding of the film. And the absence of scratches! On the other hand, the motor drive system has been lubricated and tested! The brushed and shiny metal parts! These maintenance operations are rarely or even never offered by the sellers of BOLEX cameras! Ask them! You will be surprised ! Their cameras are sold as they are, directly taken from the attic with their dust and their dysfunctions..! No wonder these operations require experience technical and know-how! This camera is equipped with a handle and a lens: KERN VARIO SWITAR 1: 2.5 f 18/86 mm EE for BOLEX H16 RX                                       n ° 1056895 This fabulous lens specially designed for BOLEX H16 cameras is in a very good state of conservation The glasses are clear with no scratches or visible presence of mold The zoom control works perfectly A lever  allows it to be operated  This lens was designed specifically for H-16 and SLR cameras features a fully automatic iris control with a photo-resistance (exposure meter) to cadmium sulfide sensitive to values of films from 10-400 ASA. ******* Please note that most KERN lenses of this type offered for sale on this site have an integrated light meter which does not does not work ! (Cadminium sulfide, an essential element of the light meter, degrades with  time, especially in a humid atmosphere and eventually does not work anymore) ******* Whoever is integrated into this objective is in working order: the diaphragm opens and closes depending on the brightness! (photos 9) You can therefore use it automatically to film in 16 mm !! The diaphragm will react to the next closing or opening the lighting!.photo 9 No need to burden yourself with an auxiliary light meter! And correct manually the diaphragm permanently! The filmed scenes will be perfectly exposed! New mercury-free batteries are now available for supply the light meter. (photo 10) They are perfectly compatible! This is the type of battery: brand EPX625G 1.5 volt "Energizer" or others that you can get on or anywhere in the world! An original KERN metal sun visor is delivered with this zoom The "altuglass" presentation base is not part of the offer ******                                              **** Please read the general sales instructions before bidding or buying                (below) your submissions are worth acceptance.                            Thanks for your interest *** *********** Foreign Buyer (Outside the European Union) contact me before bidding. To determine the shipping costs (depending on the country) For buyers outside Europe the payment is made only by PayPal. The delivery address is exclusively the address "confirmed" by PayPal. **************  Failure to comply with these clauses cancels the order! Thank you for your understanding **********************

Superbe appareil photo reflex pour film 35mm, format 24x36 CANON F1 Old équipé de son dos Canon film Chamber 250 pour exposer 250 vues, d'un objectif FL 50mm f:1.8 et de son motor drive Unit avec son alimentation. - Boitier en très bel état, de très très faibles traces d'utilisation. La cellule fonctionne (livrée sans pile), toutes les vitesses fonctionnent. Le retardateur fonctionne. - Objectif Canon FL 50mm f:1,8 en bon état. Pas de rayure, pas de traces de nettoyage. Les bagues de mise au point et diaphragme sont souple et fonctionnent parfaitement. - le dos canon pour 250 vues est en bel état (il manque un bouton qui se visse sous l'une des bobines, ce qui n'empêche pas la bonne marche de l'ensemble), ainsi que le motor drive unit qui fonctionne, voir la vidéo en copiant le lien suivant: https://youtu.be/mEd3Npg6iYE - 2 chargeurs pour 250 vues inclus avec le dos - Bobineuse Canon en bel état. Manque un bouton au dessus du compteur. Le petit trépied visible sur les photos n'est pas inclus dans la vente Matériel non testé avec un film et vendu pour collection. Tout ce qui est dans ce set est visible sur les photos, aucun autre accessoire de disponible. PAS DE VENTE SEPAREE. Expédition pour la France: 35 euro AVEC assurance pour 1000 euro, Livraison par Mondial Relay SANS assurance: 12 euro Remise en main propre possible au marché aux Puces de Saint Ouen les lundi sur rendez vous. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Superb reflex camera for 35mm film, 24x36 format CANON F1 Old equipped with its Canon film back Chamber 250 to expose 250 frames, an FL 50mm f:1.8 lens and its motor drive Unit with its power supply. - The camera body is in very good condition, with very slight signs of use. The light meter works (delivered without battery), all speeds work. Self-timer works. - Canon FL 50mm f:1.8 lens in good condition. No scratches, no traces of cleaning. Focus and aperture rings are soft and work perfectly. - The Canon back for 250 frames is in good condition (a button that screws into the underside of one of the coils is missing, but this does not prevent the unit from working properly), as is the motor drive unit, which works. See the video by copying the following link: https://youtu.be/mEd3Npg6iYE - 2 chargers for 250 frames included with the back - Canon winder in good condition. Missing a button above the counter. The small tripod shown in the photos is not included in the sale. Equipment not tested with film and sold as a collector's item. Everything in this set is shown in the photos, no other accessories available. NO SEPARATE SALE. Shipping for China or U.S.A is 90 euro WITH 1000 euro insured with post office. Shipping for UE with post office is 42 euro WITH insurance for 1000 euro. Shipping cost with mondial relay for WITHOUT insurance for Belgium, Luxemburg, Nederland, Portugal, Spain, Germany, Italia and Austria: 22 euro En savoir plus Collaboration commerciale.