Belkin fm with

Belkin  - TuneBase FM with Hands-free Support émetteur FM chargeur pour iPhone Écoutez et chargez votre iPhone dans la voiture tout en faisant des appels en mains libres. Grâce au TuneBase FM, vous pouvez écouter votre musique ou faire des appels en mains libres en toute simplicité. Faites des appels en mains libres par l'entremise de votre autoradio Pivote facilement pour visualisation à l'horizontale Support universel ajustable pouvant accueillir un iPhone ou un iPod dans son étui Compatible iPhone

Support voiture Accessoires mobiles Mots cles: Apple iPhone Famille de produits: Mobile Type de Produit: Support voiture En-tête / Fabricant: Belkin En-tête / Compatibilité: Apple En-tête / Compatibilité: Apple

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 10-juil.-19 à 05:53:17 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 09-juil.-19 à 17:37:11 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 08-juil.-19 à 15:14:31 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 10-août-19 à 10:14:47 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point Le 30-août-19 à 13:44:50 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 30-août-19 à 11:05:14 Paris, le vendeur a ajouté les informations suivantes:

Belkin Universal Home Charger with Micro USB ChargeSync Cable (10 Watt / 2.1 Amp) DESCRIPTION: Buy Belkin Universal Home Charger with Micro USB ChargeSync Cable (10 Watt / 2.1 Amp) featuring Power Adapter and 4' micro USB/USB Cable, 10 Watt / 2.1 Amp Output. Review Belkin POWER OUTPUT Output Ports 1 x USB Type-A:2.1 A (10 W) Max Combined Power Output 10 W Output Connector Micro-USB (via Detachable Cable) GENERAL Cable Length 4' / 1.2 m Weight 0.5 oz / 15 g PACKAGING INFO Package Weight 0.2 lb Box Dimensions (LxWxH) 5.3 x 4.1 x 1.4" IN THE BOX Belkin Universal Home Charger with Micro USB ChargeSync Cable (10 Watt / 2.1 Amp) Universal Home Charger Micro USB to USB Cable

Belkin BOOSTUP Home Charger with ChargeSync Lightning Cable (12 Watt / 2.4 Amp, White) DESCRIPTION: Buy Belkin BOOSTUP Home Charger with ChargeSync Lightning Cable (12 Watt / 2.4 Amp, White) featuring Power Adapter, 12 Watt / 2.4 Amp Output 40% Faster Than 5 Watt Charging. Review Belkin BOOST UP POWER OUTPUT Output Ports 1 x USB Type-A:2.4 A (12 W) Max Combined Power Output 12 W Output Connector Lightning (via Detachable Cable) GENERAL Cable Length 4' / 1.2 m Dimensions 1.2 x 2.2" / 30.5 x 55.9 mm Weight 0.6 oz / 17.0 g PACKAGING INFO Package Weight 0.25 lb Box Dimensions (LxWxH) 5.3 x 4.0 x 1.4" IN THE BOX Belkin BOOSTUP Home Charger with ChargeSync Lightning Cable (12 Watt / 2.4 Amp, White) Lightning to USB Cable $2,500 Connected Equipment Warranty

Belkin Sport-Fit Armband for iPhone 8 Plus, iPhone 7 Plus and iPhone 6/6s Plus. Condition is Used. Shipped with USPS First Class Package.

Belkin BoostUp 10W Wireless Charging Stand for iPhone, Samsung Galaxy. Condition is "Used". Shipped with USPS First Class.

FM transmitter module wireless microphone surveillance frequency 85-115MHz ZH   Operating Voltage: DC 2V- 12V Current: 9mA (3V voltage ） Reference distance: open ground 100 meters, 10-30 meters indoor environmental obstacles (3v voltage test, increasing the voltage from the greatly increased) Operating frequency: 85MHZ --- 115MHZ (usually between 99-101 boot default frequency) Receive way: as long as the 88-108MHz FM radio can receive, with FM feature phones. Frequency adjustment: adjustable capacitor Output Impedance: 50 ohms Size:2 cm * 1cm （L*W）   Package Included:  1 x FM transmitter module wireless microphone Surveillance frequency 85-115MHz Le 17-sept.-19 à 15:29:11 Paris, le vendeur a ajouté les informations suivantes:

DESCRIPTION: Buy Belkin Express Dock for iPad with Built-In 4' USB Cable featuring Adjustable Lightning Connector, Charge and Sync Through USB Port Charge with Wall Outlet. Review Belkin PRODUCT SPECS Compatibility iPhone 5/5s iPod touch 5th gen iPad mini iPad 4th gen iPad mini 2 PACKAGING INFO Package Weight 1.0 lb Box Dimensions (LxWxH) 6.0 x 5.0 x 3.5" IN THE BOX Belkin Express Dock for iPad with Built-In 4' USB Cable Limited 2-Year Warranty

DESCRIPTION: Buy Belkin USB Wall Mount Surge Protector with Cradle featuring 3x AC Outlets, 2x USB Ports 540 Joule Surge Protection. Review Belkin POWER OUTPUT Output Ports 3 x 3-Prong Edison: 120 VAC 2 x USB Type-A2.4 A Shared Max Combined Power Output 12 W POWER INPUT Surge Energy Rating 540 Joules PACKAGING INFO Package Weight 0.65 lb Box Dimensions (LxWxH) 6.2 x 5.1 x 2.6" IN THE BOX Belkin USB Wall Mount Surge Protector with Cradle $25,000 Belkin Connected Equipment Warranty Limited 1-Year Warranty