Board installed in synth

Carte mère ASUS P5K-E/WIFI-AP avec Intel 4 cœurs et mémoire. Kit comprenant: Carte mère ASUS P5K-E/Wifi-AP. Processeur Intel® Core™2 Quad Q6600, avec radiateur Zalman tout cuivre et large ventilateur extra silencieux. Mémoire installée 4 Go. Cette carte mère présente de multiples avantages, en offrant une connectivité exceptionnelle. Par exemple, elle prend en charge des disques en PATA (1 port interne capable de gérer 2 disques) et en SATA (6 ports internes et 2 ports externes eSATA), gère des disques en RAID, et elle a un port parallèle pour lecteur de disques souples. Elle intègre la connectivité WiFi et Ethernet.  Et elle offre 8 ports USB2. Et deux ports Firewire. Elle a même un port série. Ah, j'oubliais: un port souris/clavier, et une sortie son optique. Bref, c’est une excellente carte mère très bien équipée « à tout faire ». Elle est en parfait état, prête à être installée dans un nouveau boîtier. Elle est livrée avec le cache arrière, le port série, l’antenne WiFi et deux cables eSATA/SATA de 1 mètre pour connecter des disques externes Voir toutes les caractéristiques ici:  https://www.cnet.com/products/asus-p5k-e-wifi-ap-ailifestyle-series-motherboard-atx-lga775-socket-p35-series/ Et le manuel complet ici:   https://www.modes-d-emploi.com/manuals/296323/asus-p5k-e_wifi-ap-p5k-e.html L’ensemble sera très soigneusement emballé pour ne subir aucun dommage durant le transport. ASUS P5K-E/WIFI-AP motherboard with 4 core Intel processor and memory. The kit includes: ASUS P5K-E/Wifi-AP Motherboard Intel® Processor Core™2 Quad Q6600, with Zalman all copper radiator and large extra silent fan. Installed memory 4 GB. This motherboard has multiple advantages, offering exceptional connectivity. For example, it supports PATA (1 internal port that can manage 2 disks) and SATA disks (6 internal ports and 2 external eSATA ports), manages RAID disks, and has a parallel port for 2 floppy disk drives. It integrates WiFi and Ethernet connectivity.  And 8 USB2 ports. It even has a serial port. And two Firewire ports. And I almost forgot: a serial mouse/keyboard port, and an optical sound port. In short, it's a great all-purpose very comprehensive mother board. It's in perfect condition, ready to be installed in a new case. It comes with the back cover, the serial port on a bracket, the WiFi antenna and two eSATA/SATA cables (1 meter each) to connect external disks. See all the features here: https://www.cnet.com/products/asus-p5k-e-wifi-ap-ailifestyle-series-motherboard-atx-lga775-socket-p35-series/ And the complete manual here: https://www.modes-d-emploi.com/manuals/296323/asus-p5k-e_wifi-ap-p5k-e.html The kit will be very carefully packed to avoid any damage during transport.

Apple Macintosh SE/30 totalement fonctionnel, restauré et "recappé" vendu avec son clavier et sa souris d'origine. Le "recappage" correspond au remplacement des condensateurs qui finissent par fuir avec les années entrainant diverses défaillances. La carte mère, l'alimentation ainsi que la carte analogique ont été recappées (voir photos 4 à 9). Le disque dur a été remplacé par une carte SCSI2SD plus performante et fiable. Celle-ci a été installé à l'emplacement pour carte d'extension afin de permettre un accès simple à la carte micro SD et au port micro USB depuis l'arrière de l'ordinateur. Configuration (voir photo 2): - 8 mo de ram - SCSCI2SD avec carte micro SD de 16go - Lecteur de disquette  FDHD totalement fonctionnel (lecture et éjection) - Système 7.5.5 et 6.0.7 - Pile de sauvegarde neuve Vous pouvez jugez de l'état interne de l'ordinateur via la photo 10. N'hésitez pas à me contacter pour toutes question ou demande d'informations supplémentaires. --------------------------------------------------------------------------------------------------------- Apple Macintosh SE/30 fully functional, restored and "recapped" sold with its original mouse and keyboard. The "recapping" corresponds to the replacement of capacitors which end up leaking over the years leading to various failures. The logic board, the power supply and the analog board was recapped (see picture 4 to 9). The hard drive has been replaced by a more efficient and reliable SCSI2SD card. This has been installed in the expansion card slot to allow easy access to the micro SD card and micro USB port from the back of the computer. Configuration (see picture 2): - 8 mo of ram - FDHD floppy drive fully functional - System 6.0.7 and 7.5.5 - Brand new PRAM battery You can check the internal condition of the computer thank to the 10th picture. Please contact me for any question. Please contact me if you need a shipment to outside European Union.

SDI Card DVS LUCYe1 DVS GmbH LUCY E1.  État : "Occasion / Used" Used but perfectly working SDI PCI Card + extension board DVS LUCYe1  DVS GmbH LUCY E1 23070123 Actually installed in HP Proliant DL360 G6 server with 2 x SSD 146Go Server can be sold for an additional 100 EUR. Pickup in Paris, France or contact us for international shipment. (The transport included is for the PCI card only, not the HP Server)

Features  • 48 Bits of Digital Input/Output. • All 48 I/O Lines Buffered on the Board.  • I/O Buffers Can Be Enabled/Disabled under Program Control  • Four and Eight Bit Ports Independently Selectable for I/O.  • Pull-Ups on I/O Lines.  • +5V Supply Available to the User.  • Compatible with Industry Standard I/O Racks like Gordos, Opto-22, Potter & Brumfield, Western Reserve Controls, etc.  Applications  • Automatic Test Systems.  • Laboratory Automation.  • Robotics  • Machine Control.  • Security Systems, Energy Management.  • Relay Monitoring and Control.  • Parallel Data Transfer to/from the PC.  • Sensing Switch Closures or TTL, DTL, CMOS Logic  • Driving Indicator Lights or Recorders   These PCI bus cards provide 48 bits of parallel digital input/output capability and can be installed in seven-inch (178 mm) or longer PCI-bus slots. Each I/O line is buffered and capable of sourcing 15 mA or sinking 24 mA (64 mA on request). The cards contain two type 8255 Programmable Peripheral Interface chips (PPI) to provide computer interface to 48 lines. Each PPI provides three 8-bit ports A, B, and C. Each 8-bit port can be software configured to function either as inputs or as latched outputs. Port C can also be software configured for four inputs and four latched outputs. Pull-ups on the cards assure that there are no erroneous outputs at power-up until the card is initialized by system software.

- - - - - - - - Product Description Before you buy this product, you need to pay attention to: NOTE: The printer must be disconnected from the power source before the print head is installed, otherwise it has the risk of causing the print head circuit board to burn out. 1. When the print head is shipped, a protective liquid will be applied to the print head. Before using it for the first time, wipe the print head before installing it.Just wipe the copper sheet gently, wipe it clean with soft paper, don't wipe it with cleaning fluid or eraser. 2. During the regeneration process of the print head, the ink will be cleaned and the protection liquid will be injected. If there is no protective liquid, the print head cannot print because the pipeline channel is dry.If the print head can be detected, but the colors are uneven or blurred, you can continue printing with ink. Print a few more sheets of paper and wait for the excess protection fluid to run out, then you can print normally 3. If the printing effect is not clear, press the machine cleaning button to clean (the print head must be cleaned only when the ink cartridge is sufficient, or it will burn out easily). 4. You don't need to clean the print head with cleaning fluid, you can clean the print head directly on the machine. If you clean the print head with the cleaning fluid(or water) and do not drop the protective fluid, the print head will be completely blocked, and it will be useless.   Before you install this product, you need to pay attention to: 1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink. 2.Be careful when installing the print head, be sure to cut off the power first, and install it in place. 3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket. 4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage. 5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty. 6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work. Reufrbished 950 951 Printhead for Hp officejet pro 8100 8600 CM751 950 951 Printhead for Hp 8100 8600 8610 8620 8630 8640 251dw 276dw Feature: Excellent performance and high quality. Made of high-quality material, durable, firm and stable for us to use. This is a cleaned, thoroughly tested and sealed Printhead. Good stability, long lifespan. Full color function. This is Aftermarket Replacement Item But Not Genuine. Size:104x

Fully recapped Macintosh Colour Classic. The unit is fully working, no problems whatsoever. No screen burn or screen problems, pictures are unfaitfull, dark areas not present in real life ! The unit features a Asante Maccon Etheret Card (MCiLC-10T), software is installed. The hard drive has been replaced with a BlueSCSI board, 1Gb MicroSD card included with OS installed. Plug&Play ! Main unit fully retrobrighted with good result. (12% creme peroxyde, 24 hours under led light) Mouse & Keyboard also retrobrighted using the same technique! Logic board has been recapped fully with tantalum caps. Analog board recapped with new electrolytics caps. Lubricated floppy drive. New PRAM battery & PSU Fuse. Defects: One small part broken in one of the top corners (see photo) Dent in the plastic grid behind (see photo) Specs: - 8Mo RAM, 2x4Mo RAM modules. - 1Gb BlueScsi Hard Drive Comes with some softwares, netscape, etc. What is included: - Main Unit (Macintosh Colour Classic) - Apple Design Keyboard (Azerty) - Apple Desktop Bus Mouse II - Power Cable Everything is genuine Apple hardware. Beware, on some pictures a grey coiled cable can be seen, it is NOT included, the Apple Design keyboard included have a standard non coiled cable. Feel free to ask any questions !

- - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when  the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked  and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be with ink. And make sure to make good contact with the socket and not touch the feet. Otherwise, it will cause the print head to short-circuit and burn. 5.The steel shaft should also be clean and smooth. Use tissue to stick some lubricating oil to wipe it off. Do not directly add oil to the shaft because excess oil will flow to the print head and cause damage. 6.After confirming that the machinery and circuit are normal, it is necessary to check the water circuit. First, check whether the amount of water in the ink cartridge is sufficient or not; second, check whether the small cleaning blade and the ink pump are dirty or not. 7.There will be air in the newly installed print head, so it will not print normally immediately. Only after the air in the print head is completely exhausted can the lines be printed normally. First of all, you can use the machine's cleaning function to perform intermittent cleaning (two cleanings each time,and then two more cleanings after a 30-minute pause). Excessive cleaning for many times will cause ink accumulation in the cleaning pump. It will not only cause color mixing and ink leakage, but also

- - - - - - - - - - - - - - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be with ink. And make sure to make good contact with the socket and not touch the feet. Otherwise, it will cause the print head to short-circuit and burn. 5.The steel shaft should also be clean and smooth. Use tissue to stick some lubricating oil to wipe it off. Do not directly add oil to the shaft because excess oil will flow to the print head and cause damage. 6.After confirming that the machinery and circuit are normal, it is necessary to check the water circuit. First, check whether the amount of water in the ink cartridge is sufficient or not; second, check whether the small cleaning blade and the ink pump are dirty or not. 7.There will be air in the newly installed print head, so it will not print normally immediately. Only after the air in the print head is completely exhausted can the lines be printed normally. First of all, you can use the machine's cleaning function to perform intermittent cleaning (two cleanings each time,and then two more cleanings after a 30-minute pause). Excessive cleaning for many times will cause ink accumulation in the cleaning pump. It will not only cause color mixing and ink leakage, but also waste ink. 8.Secondly, you can print more pictures to let the print head exhaus En savoir plus Collaboration commerciale.

- - - - - - - - - - - - Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be with ink. And make sure to make good contact with the socket and not touch the feet. Otherwise, it will cause the print head to short-circuit and burn. 5.The steel shaft should also be clean and smooth. Use tissue to stick some lubricating oil to wipe it off. Do not directly add oil to the shaft because excess oil will flow to the print head and cause damage. 6.After confirming that the machinery and circuit are normal, it is necessary to check the water circuit. First, check whether the amount of water in the ink cartridge is sufficient or not; second, check whether the small cleaning blade and the ink pump are dirty or not. 7.There will be air in the newly installed print head, so it will not print normally immediately. Only after the air in the print head is completely exhausted can the lines be printed normally. First of all, you can use the machine's cleaning function to perform intermittent cleaning (two cleanings each time,and then two more cleanings after a 30-minute pause). Excessive cleaning for many times will cause ink accumulation in the cleaning pump. It will not only cause color mixing and ink leakage, but also waste ink. 8.Secondly, you can print more pictures to let the print head exhaust air during work. Third, if the mac En savoir plus Collaboration commerciale.

You are viewing a fully populated, tested but never used Re-Amiga 1200 latest version v1.5 by Chucky Hertell. This board has all the required components for a fully functional Amiga 1200 plus the following bells and whistles: - Socketed PLCC components: Lisa, Gayle, Alice, Keyboard MPU, Video DAC, Odd and Even CIA, GAL16V8B - All optional LED lights soldered, tested and functional, including the add-on Mouse PCB. - All components for VGA and S-Video included, the only items missing there are the actual connectors, I left them out intentionally. - Highest grade components used, including hybrid polymer capacitors from Panasonic. - Support for EPROMs 27C800 - Optional Amiga 500 keyboard header installed and tested. - Headers for INT7 IRQ and RESET installed. - Audio fully tested - EPROMs not included, but can program and install 2 27C400s (your choice of Kickstarts) for an additional fee. This board has been hand soldered only by myself and has taken me over 50 hours of work and test. As such, this is a hand built project to the best and cleanest of my abilities, and presents normal blemishes here and there that would normally not be present in a fab house assembled PCB. Hence its charm.

Fully recapped Macintosh Colour Classic. The unit is fully working, no problems whatsoever. No screen burn or screen problems, pictures are unfaitfull, dark areas not present in real life ! The unit features a Asante Maccon Etheret Card (MCiLC-10T), software is installed. Main unit fully retrobrighted with perfect result, color looks like new. (12% creme peroxyde, 24 hours under led light) Logic board has been recapped fully with tantalum caps. Analog board recapped with new electrolytics caps. Lubricated floppy drive. New PRAM battery & PSU Fuse. Defects: One small part broken in one of the top corners (see photo) Dent in the plastic grid behind (see photo) Specs: - 10Mo RAM, 2x4Mo RAM modules (2Mb Onboard) - 80Mo Hard drive Comes with some softwares, netscape, screensavers, etc. What is included: - Main Unit (Macintosh Colour Classic) - Apple Keyboard II (Azerty) - Apple Desktop Bus Mouse - ADB Cable - Power Cable Everything is genuine Apple hardware.

Gigabyte X570 Aorus Master Motherboard For all AMD Ryzen processors series 2000, 3000, 5000. Motherboard in a very good condition and full working order. Used a few months before upgrading to a Threadripper processor. Comes in the original box and with all the accessories. Specifications: - X570 Chipset / Slot AM4 - PCI-Express 4.0 - Dual LAN Ethernet 1 Gb + 2,5 Gb - WiFi 6 Dual Band - Bluetooth 5 - Triple SSD NVMe connectors - USB C, 3.2, 3.1, 2.0 - 3 PCI-E x16 armored slots - 1 PCI-E x1 slot - 4 Memory slots DDR4 (up to 128 Gb) - 14 Phases Digital VRM - Audio HiFi Multichannel with ESS Sabre DAC & ALC 1220 VB with audiophile output stages - Dual Bios - Flash and reset Bios buttons - RGB Fusion lightenings Good board for gaming, multimedia PC, audio/video creation, bureautics and for almost anything else depending on the Ryzen and memory installed. Designed to last long:  PCI-E 4.0,  big set of equipments, high quality components, shielding, Aorus design, high durability. MRSP is around 420€ The board will be securely packed for international air freight. The shipping is tracked and insured. Thanks for reading. ---------------------------------------------------------------------------- Est donc à vendre une carte mère Gigabyte X570 Aorus Master. Carte mère en excellent état, pleinement fonctionnelle. Elle a été utilisée quelques mois avant passage sur un processeur Threadripper. Livrée dans sa boîte d'origine avec tous ses accessoires. Elle est compatible avec tous les processeurs AMD Ryzen des séries 2000, 3000 et 5000 dont le Ryzen 9 5950X. Caractéristiques principales plus haut en anglais ou sur le Net. La carte est équipée en audio d'un DAC ESS Sabre et de composants audiophile. Elle produit un son hifi multicanal 7.1 Elle est conçue pour durer longtemps: PCI-E 4.0,  nombreux équipements, VRM digital à 14 phases, composants de haute qualité,  blindages, design Aorus, haute durabilité. Idéal pour Jeux,  Plateformes multimédia, Créations graphique et son, montage vidéo,  bureautique, etc... Prix Public environ 420€ en boutique. Merci d'avoir lu jusque là.

Vous Pouvez Aussi Aimer - Tête d'impression Printhead pour iX4000 iX5000 iP3100 iP3000 MP710 MP730 MP740 55.19 EUR Free shipping - Tête d'impression Printhead pour 9100i S9000 S900 i9100 F9000 F900 QY6-0039 57.59 EUR Free shipping - Tête d'impression pour WF7610 WF7620 WF7611 WF7111 WF7621 WF3641 WF7710 A 65.99 EUR Free shipping - Tête d'impression Printhead pour i9900 I9950 IP8600 Pro900 9900i Mark II S 107.99 EUR Free shipping - Tête d'impression pour Epson WF-2630 L300 L301 XP315 XP415 ME401 ME303 WF-2520 59.99 EUR Free shipping - Tête d'impression pour HP 932 933 XL OfficeJet 7110 7610 7612 7600 6060e 6100e 57.59 EUR Free shipping - QY6-0075 Tête d'impression pour MP770 MP790 PIXMA MP750 MP760 860I 865R QY6-0049 41.99 EUR Free shipping - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the pl En savoir plus Collaboration commerciale.

Vous Pouvez Aussi Aimer - Tête d'impression Printhead pour PIXMA PRO9500 Mark II nozzle QY6-0077 S 141.59 EUR Free shipping - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping - Tête d'impression pour Epson WF-2630 L300 L301 XP315 XP415 ME401 ME303 WF-2520 59.99 EUR Free shipping - Tête d'impression Printhead pour iX4000 iX5000 iP3100 iP3000 MP710 MP730 MP740 55.19 EUR Free shipping - QY6-0072 Tête d'impression Printhead pour iP4600 iP4680 iP4700 4760 MP630 S 45.59 EUR Free shipping - F173030 Tête d'impression pour epson 1390/1400/1410/1430/1500W R260 S 176.39 EUR Free shipping - QY6-0055 Tête d'impression Printhead pour i9900 iP8500 9950 ip9100 PRO9000 S 79.19 EUR Free shipping - Tête d'impression pour WF7610 WF7620 WF7611 WF7111 WF7621 WF3641 WF7710 A 65.99 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do n En savoir plus Collaboration commerciale.

Vous Pouvez Aussi Aimer - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping - Tête d'impression pour HP 932 933 XL OfficeJet 7110 7610 7612 7600 6060e 6100e 57.59 EUR Free shipping - QY6-0075 Tête d'impression pour MP770 MP790 PIXMA MP750 MP760 860I 865R QY6-0049 41.99 EUR Free shipping - Tête d'impression Printhead Full Color pour PIXMA iP100 IP110 S 62.39 EUR Free shipping - 952 955 Tête d'impression pour HP Officejet Pro 8710 8216 7740 8720 8730 8210 S 92.39 EUR Free shipping - ESP C100 C110 C310 C315 C300 ESP 3.2 Hero 5.1/3.1 Tête d'impression S 34.79 EUR Free shipping - QY6-0055 Tête d'impression Printhead pour i9900 iP8500 9950 ip9100 PRO9000 S 79.19 EUR Free shipping - Tête d'impression Printhead pour PIXMA PRO9500 Mark II nozzle QY6-0077 S 141.59 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be En savoir plus Collaboration commerciale.