Both internally and externally

Kurzweil Operating System 3.87C  (Calvin) update kit for K2000 and K2000R  Version 3.87 is the latest and the Best Operating System version for K2000 series synthesizers.   You will receive: - two brand new EPROMS - (K2000 Eng HI  and K2000 Eng LO), corresponding to the Operating System version 3.87 for K2000 K2000R (Calvin)  - integrated circuits extractor - phone or email support  Upgrading your K2000, K2000VP, or K2vx There are 2 different versions of the engine board and operating system - Calvin and Janis. If there is a "J" after the version number on the display on boot time, than you have a Janis unit, if there is no letter after the version number, you have a Calvin unit.                                                      Make sure to buy the right EPROM update kit corresponding to your board (Calvin or Janis) !!! Please note: If your K2000 system  directly from a version earlier than 2.0 (like 1.3 version) of the Kurzweil Operating System requires the additional purchase of new Setup EPROMs, which are NOT included with this operating system update kit but available on our shop.  K2000 Series - v3.87 Operating System New features and enhancements added when upgrading from version 3.54 - SCSI Speed Improvements. Now loads and saves twice as fast as previous versions. - Export to standard MIDI Type 1. Now the software can import and export both Type 0 and Type 1 MIDI files. - ISO 9660 format support. Adds ISO 9660 format support for CD's. This allows you to read CD's in the standard format. Previously we required an "image" of the hard disk format. - Supports looped WAV files, both import and export. Also correctly handles tuning of WAV and AIFF files. Saving a WAV file will now export the loop info, if any. Importing a looped WAV file will now get the loop data, if any. The software only handles one loop per sample, so the first loop found in a WAV file is used. - Now reads 2500 programs. Previously the 2000 would ignore programs containing 2500 specific parameters. Now it translates them, stripping out any KDFX or other 2500 parameters. - Improved object save and delete times. - Improved sample delete times.   New features and enhancements added when upgrading from version 3.01 or 3.18 All of the above, plus: - Eight 32-layer "drum" channels are now available. (PRAM option required). - A new option has been added for the sustain pedal (Program editor - LAYER page). When you select "On2," the sustain pedal will not catch the release of a note that is still sounding when the sustain message is received; this can be very useful in a program that uses amplitude envelopes with a long release time. - MIDI type 1 files can now be imported. - Verify option double-checks the data integrity of all your backup, copy, and save operations. - Info soft button on the Utilities page in Disk mode displays information about your disk drive(s). - Copy function now allows selection of multiple files. - You can now format multiple floppies without having to return to the initial Format command. - The K2000's SCSI subsystem has been enhanced to accept a greater variety of devices. In addition, the K2000 now supports disk drives of up to 2 Gigabytes (2048 Meg). V3.54 will work with drives larger than 2G but only the first 2 G will be utilized. (Drives larger than 1 gig will work externally, but are likely to draw too much power to be used internally. Please check our Hard Drive Compatibility List for power consumption specs. - Previous to v3.54, for the Backup and Copy functions, the combined size of both drives had to be under 1 gig unless PRAM was installed. This limitation no longer exists. - Compatibility with the PC Exchange program has been improved.   New features and enhancements added when upgrading from version 1 or 2 All of the above, plus: Version 3 operating system software for the K2000 offers majo

This is is the now RARE AND DISCONTINUED reissue of the MUTRON PHASER II made by Mike Beigel himself (see signature on the pedal). This is actually one side of the mythical MUSITRONICS BI-PHASE. You can switch between 4 and 6 stages of phasing which is great. Has ton of headroom so you can use it with guitar, synth or line level. Purchased directly from Mu-Fx in 2017 after months of wait. MU-FX has now become back MU-TRON:) Condition almost like new with original box and goodies. Will be shipped with Express and Fully Insured Service. DESCRIPTION FROM MIKE BEIGEL: Mu-FX Phasor 2X The new Mu-FX Phasor 2X is the Modern Vintage Analog™ refinement of the original Musitronics® Phasor II pedal. The Phasor 2X is housed in our signature “mini-mu” enclosure, features retro graphics, and provides added functionality and reliability to the beloved sound of the original Phasor II. New functions include: 4 or 6 stages of optical phasing with independent controls, assignable expression pedal controls, and stereo output.   Description Controls (1) PHASE 1a) FEEDBACK (6 Stage): Sets the amount of effected signal fed back into the effect for a more pronounced effect 1b) FEEDBACK (4 Stage): Sets the amount of effected signal fed back into the effect for a more pronounced effect (2) SWEEP 2a) DEPTH (6 Stage): Controls the range of the phase sweep 2b) DEPTH (4 Stage): Controls the range of the phase sweep (3) PEDAL MODE SWITCH These two toggle switches (for the 6 Stage phasor and 4 Stage phasor respectively) allow the user to designate whether expression pedal control is (O) OFF, (EXP EXP) controlling SWEEP. 3a) EXP MODE TOGGLE SWITCH (6 Stage): (EXP (O): Turns off expression pedal control of any function (>EXP): Sets expression pedal to control the SWEEP of the phase 3b) EXP MODE TOGGLE SWITCH (4 Stage): (EXP (O): Turns off expression pedal control of any function (>EXP): Sets expression pedal to control the SWEEP of the phase (4) LFO 4a) RATE (6 Stage): Controls the speed of the LFO wave that controls the effect 4b) RATE (4 Stage): Controls the speed of the LFO wave that controls the effect (5) Footswitches 5a) FX BYPASS: Determines whether the Phasor 2X’s effect is engaged or true bypassed (active bypass can be selected internally) 5b) PHASE STAGE: Allows you to switch between 6 and 4 stages of phasing (and their respective control set). The adjacent LED indicates (by color) which PHASE STAGE is active (the knob colors also correspond to these designations). BLUE: 6 stage phasing GREEN: 4 stage phasing Note: Both BYPASS and PHASE STAGE are silent footswitches – relay switching of audio (6) Back Panel 6a) INPUT: A standard ¼” input jack for any instrument or audio input 6b) OUT 1 (Main audio output): A standard ¼” output jack – sending a mono output signal to whatever comes next in your signal chain 6c) OUT 2: A standard ¼” output jack – which, when used in addition to OUT 1 sends a second (and therefore stereo) signal to whatever comes next in your signal chain. It may also be used to achieve a varied phase effect 6d) EXP PEDAL: A standard ¼” TRS jack in which an expression pedal or (CV) can be inserted to access manual control of specific functions of the Phasor 2X 6e) POWER: The Phasor 2X runs on a 12V AC power supply for optimal headroom and hi-fidelity sound. DO NOT use with a DC supply.

TEKTRONIX VITS 201 INSERTION GENERATOR PAL ******************************** DESCRIPTION NON CONTRACTUEL: Analog Generator VITS201 Features & Benefits - Digital Composite Signal Generation - CCIR, EBU, UK National ITS - Operates in the Presence of Sound in Syncs - Four External ITS Inputs - Source Identification - Program Line Sync and Burst Regeneration - Loss of Program Input Modes: - External Input to Program Out - Internal Generator to Program Out - Program Line Bypass - User Programmable Text Generator Provides: - Message in Program Line Vertical Interval - Message in Active Picture Area for Loss of Program Input Modes - User Programs for: - Insertion of Internal, External, and Source Identification Signals - Loss of Program Input Modes Text Insertion - All User Program Settings Saved in Nonvolatile Storage - Monitor Output - Remote Control Applications - VITS Insertion for Broadcast Video Applications The VITS201 is a low cost, high quality ITS generator and inserter/deleter with features found only in the most expensive transmission grade ITS inserters. In addition to a solid basic generator/inserter unit, the VITS201 provides loss of program continuity modes, multiple inputs for external data insertion, source identification, a text generator for message insertion and a versatile programmer with nonvolatile memory storage for setting up the unit's operation and loss of program modes. Test Signal Generator The VITS201 uses digital signal generation and a precision 12-Bit DAC to ensure signal accuracy and long term stability. Digital generation of the composite signal with conversion to analog using a single DAC ensures accurate chrominance-to-luminance gain and timing. The VITS201 generates the following signals: - CClR 17, 18, 330 and 331 - U.K. National - GCR - 75% color bars - Sin (x)/x - Luminance ramp - 0% and 100% luminance levels Inserter/Deleter Functions The VITS201 may be programmed to insert any internally generated signal, external input, or the source identification signal on any line from 7 through 30 and 319 through 343. If desired, the same signal or external input may be programmed for insertion on multiple lines. This may be useful in insertion of teletext and other data signals. Four external ITS inputs are provided for insertion of externally generated test and data signals. All inputs are AC coupled and clamped. The VITS201 assumes the external input signals are locked to the program signal and correctly timed. Delete and pass functions are available for the same lines as the insert function. Program Channel Maintaining transparency and continuity of the program channel is a prime consideration in the VITS201. Distortions and transients are virtually eliminated by the Tektronix developed channel switch integrated circuit. Insertion or deletion of ITS can occur only when genlock to the program input signal is attained. Loss of mains power or genlock causes the program line to be bypassed. Program signal delay in operate and bypass is matched. The VITS201 provides for replacement of the program line sync and burst signals with the internally generated sync and burst signals. This ensures the proper amplitude relationship of the inserted ITS to the sync and burst signals is established prior to inputting the signal to the broadcast transmitter or transmission system. Timing of the active video to the blanking interval is not affected in the sync and burst regeneration mode. Loss of the program input signal will automatically enable one of three program line output states: - Program line bypassed - A user selected external input will be routed to the program line output - A user selected internally generated signal will be routed to the program line output When an internally generated signal is selected, a message may be superimposed over the active picture area. The

Tamron AF Tele-Macro 90-300mm f4.5-5.6 zoom lens in Nikon F mount, with front cap, lens hood and protective filter. Sold for parts or repair as the iris is stuck.   Externally this lens is in good condition, with minor general signs of use. The glass is very good, it's clean, clear and unscratched, and free of haze and fungus. There are one or two minor specks of dust internally. The iris does not function correctly, the stop-down lever is very stiff. With some effort you can push the iris open and closed, but it is effectively stuck. The aperture ring moves through the settings, but the iris does not move.  The zoom and manual focus barrels work well, and when tested the lens produces sharp results. The autofocus doesn't work very well, it hunts a lot. Due to the iris issue this lens is not usable, except when used at the widest aperture, sold for parts or repair. For items sold for 'parts or repair' - I try to give a good description of any faults I find, but it is often not realistic to give a complete list, and there will sometimes be other problems not described in the listing. Please be aware of that before buying. I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Livraison en France Cet article sera livré par Relais Mondial Relay ou Colissimo Recommandé, selon votre sélection à la caisse. International shipping I can ship this item to any location listed in the postage section of this listing. It will be sent tracked by Colissimo or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately five to seven working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

Stereo X/Y condenser microphone     Dual externally biased 1/2” capsules with gold sputtered diaphragm     Capsules closely matched with full frequency response     Dual power operation     Custom stereo cables included - 5 pin stereo XLR, Minijack (Via included cable) and dual 3-pin XLR (via included cable)     Custom twin head windshield (WS4) included     Includes custom twin head windshield WS4, RC4 case and 5-pin Minijack and XLR stereo cables     Surface mount circuitry     10 year extended warranty when you register your microphone The RØDE NT4 stereo microphone offers a perfect X/Y stereo array without the need for matched pair microphones, complex stereo bars and equipment. Simply place the microphone and capture a realistic stereo field using a single microphone. Combining an acoustically matched pair of 1/2” cardioid condenser capsules fixed in a perfect 90 degree near-coincident alignment, the NT4 instantly creates a faithful stereo array that is ideal for drum overheads, percussion, choir vocals, environmental recording and sound design in a studio or in the field. The NT4's versatility is further extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm minijack cables are supplied to ensure the NT4 is ready to record to mixing console, portable recorder or camera. Micro stéréo à condensateur petites membranes     Directivité: cardioïde     Réponse en fréquence: 20 Hz - 20 kHz     SPL max: 143 dB     Niveau de sortie max: 13 dBu     Nécessite une alimentation Phantom     Inclus: câble stéréo, bonnette, pince micro et valise de transport

TL Audio Ivory 5060 Preset Valve Compressor Fully working state. Coming in its original box. OVERVIEW:   High quality discrete microphone preamp, the 5060 has stereo line level or stereo instrument inputs.  The TL Audio 5060 is equally versatile as a “front-end" tracking device or as the final stage mixdown or mastering compressor.  One set of controls operates both the channels for quick and easy setup.  The TL Audio 5060 compressor section has 15 expertly programmed presets designed to work with a typical selection of vocal and instrumental sources as well as a manual mode for self adjustment of the compressor. The 5060's output section includes a “Fat EQ?switch for adding some “presence"or “weight"to your signal.   As with all the mono or stereo Ivory 2 units it is possible to fit the optional D0-2 converter card into the 5060 for premium quality 24-bit SPDIF analogue to digital conversion. This allows you to connect to your Hard Disc Recorder, Mixer or Soundcard in either an analogue or digital format. The combination of flexibility, ease of use and the renowned warmth of the TL Audio valve circuit design makes the 5060 unbeatable for value and performance. TL Audio 5060 Mk2 Key Features: - Valve preamp stage with mic, line and front panel instrument inputs - Compressor with 15 presets and a manual mode with user adjustable controls - Hi-pass 90Hz filter on the input stage with “Fat EQ?contour at the output stage - VU metering of output level, output level +10dB and compressor gain reduction - One set of controls for mono or stereo use - Automatic linking for stereo signals - 24-bit digital interfacing via the optional DO-2 digital output card   TL Audio 5060 Mk2 Specifications: - Preamp: Input Gain +16 to +60dB (mic input), -20 to +20dB (line input) - Compressor: Threshold: +10 to ?0dB, Ratio: 1:1.5 to 1:30, Attack: 0.5 or 5ms, Release: 0.2 or 1.5s, Gain Make Up: 0 to +20dB, Fat EQ +2dB @ 50Hz, -0.9dB @ 720Hz, +1.8dB @ 10kHz - Master Section Output Gain: -?to +15dB - PSU: Internally adjustable for 230V 50Hz or 115V 60Hz operation - Typical Consumption: 30VA - Dimensions: W: 483 x H: 88 x D: 200mm (2U 19" rack mounting) - Shipping Weight 6kg Will be sent well packed. Shipping to France: 20.50€ € Shipping to Europe and UK: 37.00 € Shipping to International: Please ask before bidding Accepted payment: Please only, PayPal