Burn after

LOT 2 CLES USB A REPARER POUR CONNAISSEUR. JE PENSE QU'IL FAUT FLASHER LES CLES EN EFFET LE PRIX AUX ENCHERES COMMENCE TRES BAS 1 CLE DE 32 GB MAIS QUI ACCEPTE 5GO.. APRES LES FICHIERS GRAVENT MAIS SONT ILLISIBLE 1 CLE DE 64 GB MAIS QUI ACCEPTE 12 GO. APRES LES FICHIERS GRAVENT MAIS ONT ILLISIBLE AUCUNE REPRISE NI REMBOURSEMENT NE SERA ACCEPTER VENDU POUR PIECES HORS SERVICE... LOT 2 CLES USB A REPAIR FOR CONNOISSEUR. I THINK WE NEED TO FLASH THE CLES INDEED THE PRICE AT AUCTION STARTS VERY LOW 1 CLE OF 32 GB BUT ACCEPTS 5GB. AFTER THE FILES BURN BUT ARE UNREADABLE 1 CLE OF 64 GB BUT ACCEPTS 12GB. AFTER THE FILES BURN BUT HAVE UNREADABLE NO TAKEOVER OR REFUND WILL BE ACCEPTED SOLD FOR OUT-OF-SERVICE PIECES... LOTE 2 CLES USB A REPAIR PARA CONNOISSEUR. CREO QUE NECESITAMOS FLASHAR LOS CLES DE HECHO, EL PRECIO EN LA SUBASTA COMIENZA MUY BAJO 1 CLE DE 32 GB PERO ACEPTA 5GB. DESPUÉS DE QUE LOS ARCHIVOS SE QUEMAN, PERO SON ILEGIBLES 1 CLE DE 64 GB PERO ACEPTA 12GB. DESPUÉS DE QUE LOS ARCHIVOS SE QUEMAN, PERO TIENEN ILEGIBLE NO SE ACEPTARÁ NINGUNA TOMA DE CONTROL O REEMBOLSO VENDIDO PARA PIEZAS FUERA DE SERVICIO... LOTE 2 CLES USB Uma reparação para connoisseur. Acho que precisamos piscar o CLES NA VERDADE, O PREÇO EM LEILÃO COMEÇA MUITO BAIXO 1 CLE DE 32 GB MAS ACEITA 5GB. DEPOIS QUE OS FICHEIROS QUEIMAREM, MAS SÃO ILEGÍVEIS 1 CLE DE 64 GB MAS ACEITA 12GB. DEPOIS QUE OS FICHEIROS QUEIMAREM, MAS TÊM ILEGÍVEL NENHUMA AQUISIÇÃO OU REEMBOLSO SERÁ ACEITE VENDIDA PARA PEÇAS FORA DE SERVIÇO... LOT 2 CLES USB A REPAIR PER CONNOISSEUR. Io THINK NEED To FLASH THE CLES INFATTI IL PREZZO ALL'ASTA INIZIA MOLTO BASSO 1 CLE DI 32 GB MA ACCEPTS 5GB. DOPO LA MASTERIZZAZIONE DEI FILE MA ILLEGGIBILI 1 CLE DI 64 GB MA ACCEPTS 12GB. DOPO LA MASTERIZZAZIONE DEI FILE, NESSUNA ACQUISIZIONE O RIMBORSO SARÀ ACCETTATO VENDUTO PER I PEZZI FUORI SERVIZIO... LOT 2 CLES USB A REPAIR FÜR CONNOISSEUR. I THINK WE NEED TO FLASH THE CLES TATSÄCHLICH BEGINNT DER PREIS BEI DER AUKTION SEHR NIEDRIG 1 CLE VON 32 GB, AKZEPTIERT ABER 5 GB. NACH DEM BRENNEN DER DATEIEN, ABER NICHT LESBAR 1 CLE VON 64 GB, AKZEPTIERT ABER 12 GB. NACH DEM BRENNEN DER DATEIEN, ABER HABEN UNLESBAR KEINE ÜBERNAHME ODER RÜCKERSTATTUNG WIRD FÜR AUßERBETRIEBIGE STÜCKE VERKAUFT...

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 10-juil.-19 à 05:53:17 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 09-juil.-19 à 17:37:11 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 08-juil.-19 à 15:14:31 Paris, le vendeur a ajouté les informations suivantes:

Dual USB 1A 2.1A Mobile Power Bank 18650 Circuit Charger PCB Module Board PK Features:   * This is the mobile power module Accessories, 18650 Circuit board shell. * 100% brand new and high quality * Meet the individual needs of your DIY, but you must understand basic electronic assembly. * Motherboard comes with protection function: Charging overcharge protection, over-discharge protection, over-current protection. * Intelligent output device after charging full, automatically stop charging, to prevent mobile phones overcharge. * Output voltage and current stable, will not harm user devices.   Specifications:   * Micro USB input: 5V 1A * USB Output: 5V 2.1A / 5V 1A(Dual USB interface) * Charging display: intelligent digital display * Batteries Type: liquid lithium-ion batteries (18650) * Product Dimensions: 57* 28mm(approx) * Screen Dimensions: 27* 17mm(approx)   Installation:   The circuit board is connected to the battery negative B-, B + is the positive, do not connecting reversed, connecting reversed will burn the board, the battery is connected in parallel welding, assembling battery.   Package contents:   1*PCB Motherboard(Case is not included)   Note: 1. The insulation between the battery and the circuit board, battery lead not to touch the circuit board, so as not to cause a short circuit. 2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness Le 10-juil.-19 à 21:48:05 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 10-août-19 à 10:14:47 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point Le 30-août-19 à 13:44:50 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 30-août-19 à 11:05:14 Paris, le vendeur a ajouté les informations suivantes:

Features:   * This is the mobile power module Accessories, 18650 Circuit board shell. * 100% brand new and high quality * Meet the individual needs of your DIY, but you must understand basic electronic assembly. * Motherboard comes with protection function: Charging overcharge protection, over-discharge protection, over-current protection. * Intelligent output device after charging full, automatically stop charging, to prevent mobile phones overcharge. * Output voltage and current stable, will not harm user devices.   Specifications:   * Micro USB input: 5V 1A * USB Output: 5V 2.1A / 5V 1A(Dual USB interface) * Charging display: intelligent digital display * Batteries Type: liquid lithium-ion batteries (18650) * Product Dimensions: 57* 28mm(approx) * Screen Dimensions: 27* 17mm(approx)   Installation:   The circuit board is connected to the battery negative B-, B + is the positive, do not connecting reversed, connecting reversed will burn the board, the battery is connected in parallel welding, assembling battery.   Package contents:   1*PCB Motherboard(Case is not included)   Note: 1. The insulation between the battery and the circuit board, battery lead not to touch the circuit board, so as not to cause a short circuit. 2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness Le 21-nov.-19 à 10:15:32 Paris, le vendeur a ajouté les informations suivantes:

5V 1A 2.1A Dual USB Mobile Power Bank 18650 Battery Charger PCB Module Board:D Features: This is the mobile power module Accessories, 18650 Circuit board shell. Meet the individual needs of your DIY, but you must understand basic electronic assembly. Motherboard comes with protection function: Charging overcharge protection, over-discharge protection, overcurrent protection. Intelligent output device after charging full, automatically stop charging, to prevent mobile phones overcharge. Output voltage and current stable, will not harm user devices. Specifications: Micro USB input: 5V 1A USB Output: 5V 2.1A / 5V 1A(Dual USB interface) Charging display: intelligent digital display Batteries Type: liquid lithium-ion batteries (18650) Product Size: 57mm x 28mm Screen size:27mm x 17mm Installation instructions: The circuit board is connected to the battery negative B-, B + is the positive, do not connecting reversed, connecting reversed will burn the board, the battery is connected in parallel welding, assembling battery. Note that the insulation between the battery and the circuit board, battery lead not to touch the circuit board, so as not to cause a short circuit. Package included: 1 x Mobile Power Bank 18650 Battery Charger PCB Le 16-avr.-20 à 10:03:50 Paris, le vendeur a ajouté les informations suivantes: