Calibrated

Cross-Spectrum Labs Calibrated - Dayton Audio EMM-6 Measurement Microphone. État: Occasion Acheté neuf, servi deux fois pour mes enceintes puis rangé dans un placard...

KENWOOD KX-9050S: The last one from the Japanese giant Letter “S” here stands for Dolby S addition to standard Dolby B and C noise reduction companders. The “S” variant also had a little higher list price, around two hundred  Deutche Mark or so, getting at around at 1.300 DEM. In all other aspects it was the same deck. Remote control was supplied with it. The main features of the Kenwood KX-9050S are:  - 3 heads and off-tape monitoring, digital linear tape counter with 4 digits, manual tape type selection and capable of handling normal, chrome and metal tapes, belt driven dual-capstan transport. The sound is  crisp and clear, so beautifully detailed. The house of the deck is nearly perfect. All the 3 belts and the 2 pinch rollers are replaced. The machine is cleaned, demagnetised and greased and lubricated. All mechanical and electrical parameters are adjusted according to the service manual. The machine is calibrated with calibration cassettes (see photos). See how it works: https://youtu.be/p1Pu-hJECjQ Specification Type: 3-head, single compact cassette deck - Track System: 4-track, 2-channel stereo Tape Speed: 4.75 cm/s Heads: 1 x combination record/playback, 1 x erase Motor: 4 x DC Tape Type: type I, CrO2, Metal Noise Reduction: B, C, S Headroom Extension: HX Pro Frequency Response: 20Hz to 22kHz  (Metal tape) Signal to Noise Ratio: 80dB  (dolby S) Wow and Flutter: 0.024% Total Harmonic Distortion: 0.7% Input: 77.5mV (line) Output: 0.49V (line) Dimensions: 440 x 138 x 328mm Weight: 7.5kg Year: 1992 Please contact me for exact shipping details and fees.

Tascam 112R Mk2, platine cassette pro, auto reverse, 100% fonctionnelle. Entièrement calibrée.. Vu-mètres calibrés et nouvelles ampoules. Courroie neuve d'origine. Gains entrée - sortie calibrés. Têtes Démagnétisées. Mécanique graissée au graphite. Auto reverse parfaitement fonctionnel Très bonne platine, fiable et performante. Quelques rayures de mise en rack mais dans l'ensemble, elle est en bon état cosmétique. Modèle rare. 220 volt.                                                           ------------------------------------- Tascam 112R Mk2, pro cassette deck, auto reverse, 100% working. Fully calibrated.. Calibrated VU meters and new bulbs. Original new belt. Gains input - output calibrated. Demagnetized heads. Mechanics greased with graphite.. Auto reverse full working Perfectly working auto reverse...Very good deck, reliable and efficient. A few scratches from racking but overall in good cosmetic condition. Rare deck. 220 volt.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) k63 MINIWATT COPPER ANODES IN LONG GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES F6A4 code 10,9/12,0 (20,1/21,9) 12,7/12,4 (23,0/22,9) 102/111 114/108 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES F6K45 code 13,3/14,9 (23,8/24,9) 114/119 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) MAZDA BLACK PLATE X SPACER U FIN FOIL GETTER SMOKED GLASS (pieces of glue moving inside the base) 41mA/15,8mA 80 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg2=265V Vg1=-13.5V Ia=100mA S=11mA/V HICKOK TV7D/U (6CA7 tube) HS5-3481 B25 D min=30 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) TESLA DOUBLE SUPERPOSED RING GETTER U FINS BLACK BASE 10 SPIKES TOP MICA NO SPIKES BOTTOM MICA 97mA/86mA S=11 94mA/83mA S=11 47 47 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg1=-13,5V Ia=5mA HICKOK TV7D/U FR3-2040 B29 B min=36 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) MAZDA BLACK PLATE SILVER STAPPLES BIG TOP SPACERS FOIL GETTER 4,5mA 4,4mA 69 70 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) VISSEAUX BLACK RIBBED PLATE 2 STRAIGHT FINS LONG D-TOP GETTER BLACK METAL BASE 53mA/24,8mA 51mA/21,5mA 72 74 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) K1E RCA BLACK RIBBED PLATE SYMETRICAL U FINS D GETTER 39mA/13,7mA 80 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC T(Va=150V Vg1=-1V Ia=18mA) P(Va=250V Vg2=110V Vg1=-0,9V Ia=10mA) HICKOK TV7D/U EV9-1080 B16 C min=57 EV2-6370 B15 B min=57 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) 4X2 SIEMENS SIEMENS MADE ≠9K code 1 LARGE ARM +1 COPPER ANODES 2 RIBS ON 2 HOLE GREY PLATE 18,1/13,0mA 18,2/13,7mA 104/+ 108/+ 4X2 SIEMENS SIEMENS MADE ≠9K b'&' ≠0B code 1 LARGE ARM +1 COPPER ANODES 2 RIBS ON 2 HOLE GREY PLATE 18,7/11,5mA 18,4/10,7mA 108/+ 102/+ CHOOSE THE PAIR YOU WANT... EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) MINIWATT GREY RIBBED PLATE SYMETRICAL U FINS D GETTER SHORT BASE 55mA/24,2mA 90 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg1=-13,5V Ia=5mA HICKOK TV7D/U FR3-2040 B29 B min=36 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) VISSEAUX BLACK/METAL PLATE COPPER STAPPLES FOIL GETTER 6,0mA 79 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) k64 MINIWATT SILVER ANODES IN LONG GREY RIBBED PLATES ROUND SIDE HOLE SMALL RING GETTER F8H4 8,1/10,0 (16,4/17,8) 76/84 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) k63 MINIWATT COPPER ANODES IN LONG GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES F6A4 code 10,9/12,0 (20,1/21,9) 12,7/12,4 (23,0/22,9) 102/111 114/108 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) NATIONAL UNION SQUARE FIN DARK GLASS 45mA/18,9mA 77 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) Gf2 MINIWATT Dario COPPER ANODES IN SMALL RIBBED PLATES DOUBLE LARGE ARMS RING GETTER F1F3 code 12,9/13,7 (22,6/23,8) 103/105 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) MAZDA GREY RIBBED PLATE UNSYMETRICAL U FINS D GETTER METAL BASE 43mA/16,3mA 82 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg1=-13,5V Ia=5mA HICKOK TV7D/U FR3-2040 B29 B min=36 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) VISSEAUX BLACK PLATE COPPER STAPLES FOIL GETTER 3,5mA 72 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) ue MAZDA Long flat plates, ring getter telefunken bottom code 10,3/10,4 (20,4/20,5) 110/110 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) RCA BLACK RIBBED PLATE DOUBLE D-GETTER SMOKED GLASS BROWN BASE 50mA/22,2mA 89 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) Gf0 RTC GREY RIBBED PLATES SILVER ARM 45° CLOSE RING GETTER D43 code 9,6/9,6 (17,8/17,8) 90/90 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES F6K45 code 13,3/14,9 (23,8/24,9) 114/119 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC T(Va=150V Vg1=-1V Ia=18mA) P(Va=250V Vg2=110V Vg1=-0,9V Ia=10mA) HICKOK TV7D/U EV9-1080 B16 C min=57 EV2-6370 B15 B min=57 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) 4X2 SIEMENS SIEMENS MADE ≠9K b'&' ≠0B code 1 LARGE ARM +1 COPPER ANODES 2 RIBS ON HOLE GREY PLATE 18,7/11,5mA 18,4/10,7mA 108/+ 102/+ EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) S6E RCA BLACK RIBBED PLATE SYMETRICAL U FINS D GETTER 39mA/13,5mA 40mA/14,3mA 88 81 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) BELVU GREY RIBBED PLATE UNSYMETRICAL U FINS D GETTER 42mA/15,0mA 87 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

Absolument comme neuf, cet objectif est codé sur 6 bit aucune trace d'utilisation, que ce soit sur les lentilles ou le fût de l'objectif. Surnommé "le Summicron Chinois", il n'a rien à lui envier au centre même à pleine ouverture. Par rapport au Summicron Leica, les bords sont un peu en retrait mais s'améliorent en fermant le diaphragme. Utilisé une seule fois, car on m'a offert un véritable Summicron Leica, je dois donc le résigner à le vendre. L’objectif peut être calibré avec votre appareil photo. Celui-ci l'est parfaitement avec le mien et mes autres objectifs Leica, donc si votre appareil est bien calibré, le réglage ne sera pas à refaire Comprend: - l'objectif dans sa boîte d'origine, avec ses bouchons avant et arrière - un filtre UV B+W  F Pro 010 43mm traité multi-couches de haute qualité - un pare-soleil métal vissant et "ventilé" + un autre bouchon avant N'hésitez pas à poser des question, mais avant d'acheter Les photos font partie de la description Posté avec suivi et assurance Absolutly mint, this lens is 6 bit coded No trace of use,whether on the lenses or the barel of the lens. Nicknamed "Chinese Summicron", it has nothing to envy it at the center even at full opening. Compared with the Summicron Leica, the edges are a little withdrawal but improves by closing the aperture. Used once, because I was offered a true Leica Summicron, so I have to resign to sell it. The focus of the objectfif can be calibrated with your camera. This one is perfectly with mine and my other Leica lenses, so if your camera is well calibrated, the setting will not be redone Come with: - The lens in its original box, with its front and rear caps - a high quality UV filter B + V F pro 010 43mm multi-layer coated - a screw on vented metal hood + another cap Feel free to ask any questions, but before buying Pictures are part of description Shipping with tracking and insurance

Le **HomePod 2ème génération** est l'enceinte intelligente connectée de marque **Apple**, conçue pour offrir un son exceptionnellement riche et profond dans n'importe quel espace intérieur. Ce modèle ne possède pas seulement les qualités sonores d'une haute gamme mais est également équipé d'un assistant vocal avancé: **Sir**. Ce dernier permet à l'utilisateur de contrôler les fonctionnalités de l'enceinte par des commandements vocaux simples et intuitifs. Il est également capable de gérer plusieurs tâches simultanément telles que jouer de la musique, faire des appels téléphoniques ou encore répondre à vos questions grâce aux fonctionnalités intégrées **Apple Music** ou **Siri**. Le **HomePod 2ème génération** dispose d'une technologie de connectivité sans fil qui permet d'étendre facilement votre système sonore dans toute la maison grâce au **multiroom audio** ou encore de synchroniser automatiquement plusieurs appareils **HomePod** dans votre domicile. Cette dernière fonction permet de créer un son uniforme dans toute la maison grâce à son système intelligently calibrated **Spatial Audio**. Les dimensions de cet appareil sont de 14.2 cm x 16.8 cm x 2.3 cm et il pèse seulement 2.3 kg ce qui lui permet d'être facilement transportable dans n'importe quelle pièce intérieure. Le design minimaliste et élégant de cette enceinte intègre parfaitement n'importe quelle décoration intérieure avec sa version blanche disponible. Le **HomePod 2ème génération** est compatible avec tous les systèmes d'exploitation iOS 13.2 ou plus récent, macOS Catalina 10.15.3 ou plus récent et tvOS 13.2 ou plus récent. Il peut être commandé via l'application **Home** sur votre iPhone, iPad ou Mac. Avec sa puissante batterie interne, il peut fonctionner sans connexion à un réseau électrique pendant plusieurs heures ce qui vous offre la liberté de l'utiliser n'importe où sans avoir besoin de se soucier de cables complexes. Acheter ce **HomePod 2ème génération** signifie bénéficier d'un système audio intelligently calibrated, d'un assistant vocal avancé et d'une expérience musicale sans faille dans n'importe quel espace intérieur. Code EAN: 0194253467922. En savoir plus

KENWOOD DC-20XL "EL POCO" DC 20 STEREO MINI COMPONENT SYSTEM HIFI SYSTEM / Boombox / Stereo radio cassette recorder TRÈS BONNE CONDITION / VERY GOOD CONDITION Des traces d’usage peuvent apparaître, mais il y en a peu, voir mes photos et ma vidéo: Traces of use may appear, but few, please watch my photos and my video: https://www.youtube.com/watch?v=F9e9ji9BXNs RECONDITIONNEE / FULLY SERVICED PARFAIT FONCTIONNEMENT / PERFECTLY WORKING ALL FUNCTIONS Nettoyée / cleaned in and out Courroies neuves / New belts Moteur régulé à 3000Hz / Speed calibrated 3000Hz Passage de bande nettoyé / Tape path cleaned (Heads, Capstans, Pinch roller …) Démagnétisée / Demagnetized That's one of the most complexe cassette deck ever built and you will not find it fitted with new belts very often ! The DC-20 may be a portable mini stereo component system, but it has the heart of pure Hifi gold. High quality broadcast reception / Excellent Tuner Performance DPSS : the tape deck’s automatic music search system You can search until 7 songs in DPSS FF and 6 in Rewind Repeat the current tune up to 7 times Indefinite repeat of the entire cassette side. Hard Permalic magnetic head INTEGRATED SPEAKERS ! ULTRA RARE BOOMBOX BUT it is considered as a TRUE HIFI SYSTEM FOR THE TRUE VINTAGE LOVERS ! PLUG YOUR PHONE, YOUR TURNTABLE OR ANYTHING ELSE!  FOR NOW THE RMS POWER ARE LIMITED BUT WITH THE MAIN AMPLIFIER...  THE PRICE WILL INCREASE AS SOON AS I GET THE MAIN AMPLIFIER AND THE EXTERNAL SPEAKERS !! LIVRAISON EN EMBALLAGE SECURISE / SAFE DELIVERY PACKAGING WORLWIDE DELIVERY

PANASONIC RX-5600 LS  Boombox / Stereo radio cassette recorder + Copy PDF du manuel en anglais par e-mail sur demande + Câble d'Alimentation / Power cable included TRES BONNE CONDITION / VERY GOOD CONDITION Des traces d’usage peuvent apparaître, mais il y en a peu, voir mes photos et ma vidéo: Traces of use may appear, but few, please watch my photos and my video: https://www.youtube.com/watch?v=4OnZ40BWAkw RECONDITIONNEE / FULLY SERVICED PARFAIT FONCTIONNEMENT / PERFECTLY WORKING ALL FUNCTIONS Nettoyée / cleaned in and out Courroies neuves / New belts Moteur régulé à 1000Hz / Speed calibrated 1000Hz Passage de bande nettoyé / Tape path cleaned (Heads, Capstans, Pinch roller …) Démagnétisée / Demagnetized MYTHIQUE BOOMBOX TPS TAPE PROGRAM SEARCH ou Recherche des blancs qui vous permettra de trouver rapidement chaque début de chanson SOFT TOUCH MECHANISM MODE MONO, STEREO, WIDE STEREO BASS, TREBLE, BALANCE LOUDNESS DOLBY NR METAL TAPE CAPABILITY RECORD EASY MATIC or MANUAL 3 digit counter 2 BIG VU METERS for the sound, the tuning and the battery LIGHTNING ENTREE DIN /PHONO Brancher votre télephone, un lecteur CD, une platine disque, ou autre source externe ! REC MUTE LED OPERATION LED STEREO LED RECORD LED TPS INCORPORATED MICROS 4 BAND: FM, LW, MW, SW AND SO MUCH MORE... BIG SIZE: 1980-1982 Formats: Tape, Tuner Loudspeakers: 2 x 160mm, 2 x 50mm Power output: 8 watts per channel Frequency response: 40Hz to 16kHz Dimensions: 564 x 325 x 162mm Weight: 7kg SO WELL BUILT ! SO GOOD SOUND ! FOR THE TRUE VINTAGE LOVERS ! LIVRAISON EN EMBALLAGE SECURISE / SAFE DELIVERY PACKAGING WORLWIDE DELIVERY