Cannot be returned

inside package: 1x Atari 1040 STE computer fully cleaned and restored, mainboard, floppy drive, case, keyboard, fully cleaned and checked components, 4MB memory / EMUTOS 121 / Fully tested and working item, note: in gift, the sdextjoy adapter, note: monitor is not included in that sale. note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's computer. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. each product sent cannot be returned. that product is refurbished item and without warranty. customers are agree with these rules in purchasing item.note: after payment, the item will only be sent following the full transfer made by to the seller's bank account, a tracking number will be sent to the buyer immediately.these changes follow the new regulations. thank you for your understanding. En savoir plus

inside package: 1xAsus GeForce GTX 580 DirectCU II graphics card, 1.5 GB details: ASUS Ref: ENGTX580-DCII/2DIS/1536MD5 NVIDIA GeForce GTX 580 graphics processor PCI Express 2.0 Standard Bus 1536 MB GDDR5 video memory GPU frequency 782 MHz Shader frequency 1564 MHz Memory frequency 4008 MHz (1002 MHz GDDR5) RAMDAC 400 MHz 384-bit memory interface Resolution Maximum D-Sub resolution: 2048x1536 Maximum DVI resolution: 2560x1600 Interface D-Sub Output: Yes x 1 (with a DVI to D-Sub adapter x 1) DVI output: Yes x 2 (DVI-I) HDMI output: Yes x 1 Display Port: Yes x 1 (standard DP) HDCP support: Yes ASUS Features DirectCU Series Super Alloy Power Dimensions 29.1 cm x 12.70 cm Note: for best cooling, the ENGTX580 DCII/2DIS/1536MD5 card extends its heatsink to 2 and a half slots. So don't forget to check if your motherboard has the space needed for SLI use. Two 8-pin power connectors are required good esthetics conditions fully working b'&' cleaned refurbished item note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's home. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. each product sent cannot be returned. that product is refurbished item and without warranty. customers are agree with these rules in purchasing item.note: after payment, the item will only be sent following the full transfer made by to the seller's bank account, a tracking number will be sent to the buyer immediately.these changes follow the new regulations. thank you for your understanding.note: le produit sera expedié dès reception du paiement sur le compte bancaire du vendeur ! un numero de suivi en colissimo sera alors transmis à l'acheteur. cela fait suite aux nouvelles reglementations. aucun retour ni remboursement ne sera accepté. l'acheteur valide cette reglementation en achetant le produit.merci de votre comprehension ! En savoir plus Collaboration commerciale.

atari sd2acsi project this adapter allows you to emulate an atari hard drive it plugs into the acsi port of the atari st, falcon, etc... it requires a bluepill stm32 to work (not included) it requires an Ardruino Micro SD to operate (not included) it is offered low cost, 90% assembled note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's computer. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.each product sent cannot be returned. that product is refurbished, not finalised item, without warranty, so due sold for parts, customers are agree with these rules in purchasing item.note: after payment, the item will only be sent following the full transfer made by to the seller's bank account, a tracking number will be sent to the buyer immediately.these changes follow the new regulations. thank you for your understanding. En savoir plus Collaboration commerciale.

inside package: 1x original apple proffessional mac pro memory kit: capacity: 16 gb (4x4gb) ram modules, 1866 MHz, DDR3 ECC, works perfeclty note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's computer. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. each product sent cannot be returned. that product is refurbished item and without warranty. customers are agree with these rules in purchasing item.note: after payment, the item will only be sent following the full transfer made by to the seller's bank account, a tracking number will be sent to the buyer immediately.these changes follow the new regulations. thank you for your understanding. En savoir plus Collaboration commerciale.

amiga prototype. sold in the state note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's home. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. each product sent cannot be returned. that product is refurbished item and without warranty. customers are agree with these rules in purchasing item.note: after payment, the item will only be sent following the full transfer made by to the seller's bank account, a tracking number will be sent to the buyer immediately.these changes follow the new regulations. thank you for your understanding.note: le produit sera expedié dès reception du paiement sur le compte bancaire du vendeur ! un numero de suivi en colissimo sera alors transmis à l'acheteur. cela fait suite aux nouvelles reglementations. aucun retour ni remboursement ne sera accepté. l'acheteur valide cette reglementation en achetant le produit.merci de votre comprehension ! En savoir plus Collaboration commerciale.

hc520 case for amiga 500 compatible with irixlabs hc520 accelerator white bottom color b'&' white top colour durableplastic (see hc508 item) new item (soon next photos) process professionnal manufacturing item bottom size: 16x3×12.6 cm top size: 16x0.5x10.4cm note: this item is perfect high quality plastic injection note: see blog chretro.com for more prints and colours note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's computer. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.each product sent cannot be returned. that product is new item and without warranty. customers are agree with these rules in purchasing item. note: after payment, the item will only be sent following the full transfer made by to the seller's bank account, a tracking number will be sent to the buyer immediately.these changes follow the new regulations. thank you for your understanding. En savoir plus Collaboration commerciale.

amiga ssd. inside package: 1x amiga sandisk ssd hardisk (128gb ssd) 4 partitions (4x30gb) fully bootable game play for amiga computers note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's computer. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. each product sent cannot be returned. that product is refurbished item and without warranty. customers are agree with these rules in purchasing item. thanks for understanding. En savoir plus

to8d thomson computer. item tested, sold for parts, for museum, due price drop no refund, no return ! new floppy drive or gotek advised for replacement second power cable mod for new drives and gotek fonctionne, prevoir gotek ou changement lecteur interne note: computer to8d thomson only is for sale note: other hardware, tv, etc... in pictures are not included in that sale note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's home. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. each product sent cannot be returned. that product is refurbished item and without warranty. customers are agree with these rules in purchasing item. En savoir plus Collaboration commerciale.

inside package: 1xAsus GeForce GTX 580 DirectCU II graphics card, 1.5 GB details: ASUS Ref: ENGTX580-DCII/2DIS/1536MD5 NVIDIA GeForce GTX 580 graphics processor PCI Express 2.0 Standard Bus 1536 MB GDDR5 video memory GPU frequency 782 MHz Shader frequency 1564 MHz Memory frequency 4008 MHz (1002 MHz GDDR5) RAMDAC 400 MHz 384-bit memory interface Resolution Maximum D-Sub resolution: 2048x1536 Maximum DVI resolution: 2560x1600 Interface D-Sub Output: Yes x 1 (with a DVI to D-Sub adapter x 1) DVI output: Yes x 2 (DVI-I) HDMI output: Yes x 1 Display Port: Yes x 1 (standard DP) HDCP support: Yes ASUS Features DirectCU Series Super Alloy Power Dimensions 29.1 cm x 12.70 cm Note: for best cooling, the ENGTX580 DCII/2DIS/1536MD5 card extends its heatsink to 2 and a half slots. So don't forget to check if your motherboard has the space needed for SLI use. Two 8-pin power connectors are required good esthetics conditions fully working b'&' cleaned refurbished item note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's home. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. each product sent cannot be returned. that product is refurbished item and without warranty. customers are agree with these rules in purchasing item. En savoir plus Collaboration commerciale.

to8d thomson computer. item tested, sold for parts, for museum, due price drop no refund, no return ! new floppy drive or gotek advised second power cable mod for new drives and gotek fonctionne, prevoir gotek ou changement lecteur interne note: computer to8d thomson only is for sale note: other hardware, tv, etc... in pictures are not included in that sale note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's home. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. each product sent cannot be returned. that product is refurbished item and without warranty. customers are agree with these rules in purchasing item. En savoir plus Collaboration commerciale.

Apple Mac Pro 6.1 2013 computer ⭐ CPU intel xeon 6 cœurs 3,5 GHz ⭐ 2x FirePro D500 graphic cards ⭐ 256gb pcie nvme ssd /// 1500 mb/s write and read ⭐ 64 Go memory ECC rdimm 14900 memory fully working, monterey factory restored, as new, international shipping note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's home. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. each product sent cannot be returned. that product is refurbished item and without warranty. customers are agree with these rules in purchasing item. En savoir plus Collaboration commerciale.

1x sn7407n chip. dip14 brand: noname 1x unit module working tested product sold in state note: you buy one module chip only ! note: We don't take responsibility for any damages or losses incurred in the shipping process or even installing item into customer's home. with shipping and handling charge: the charge covers mailing, packing, warehouse and distribution costs, and paypal fees, not only postage. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. each product sent cannot be returned. that product is refurbished item and without warranty. customers are agree with these rules in purchasing item. En savoir plus Collaboration commerciale.

- - - - - - - - - Store category Sign Up Now ! You may also like ES ANYCUBIC I3 Mega-S Impresora 3D with PLA 3D Printer Metal Frame DIY Impresión Product Description ES ANYCUBIC I3 Mega-S Impresora 3D with PLA 3D Printer Metal Frame DIY Impresión   ANYCUBIC MEGA-S Impresora 3D Printer:  Especificaciones técnicas ● Tecnología de impresión: FDM (Modelado de deposición fundida) ● Gran volumen de construcción: 210 x 210 x 205 mm. ● Precisión de posicionamiento: X / Y 0.0125 mm Z 0.002 mm ● Materiales de impresión compatibles: TPU, PLA, ABS, HIPS, madera ● Estructura completamente rígida en metal sólido y estabilidad superior. ● Impresión precisa y de alta calidad con una resolución de capa de hasta 50 micras. ● Ultrabase para una excelente adhesión y fácil extracción de componentes. ● Auto reanuda la impresión después de un corte de energía ● Extrusión Titan de alta calidad para imprimir filamentos flexibles. ● Soporte de la bobina suspendida (filamento) ● Formatos de entrada:.STL,.OBJ,.DAE,.AMF ● Temperatura ambiente de funcionamiento: 8ºC - 40ºC ● Conectividad de tarjeta SD, puerto USB (solo usuarios expertos) ● Peso de la caja: 16,5 kg. Payment Delivery details Terms of sales About us Contact us Payment 1, We accept PayPal payment only. 2, Payment must be within 8 days after you ordered the item. Delivery details 1.We cannot arrange shipments on weekend or public holidays. 2.Your orders will be shipped out within 2 business days after payment received. 3.Please be advised that the international delivery time highly depends on your local customs and post services policy. 4.We can ship your orders only to your confirmed Paypal address. Your address and full name on Paypal must match your shipping address. Please make sure payment address in PayPal is correct. 5.Please feel free to contact if you would like the DHL or Fedex shipping. And pay attention to the custom policy, we do not undertake the tariff, hope for your kindly understanding.  6.Please NOTE that seller will not pay the local customs cost when the package arrive destination country.  Terms of sales 1.The returns should be returned with our original packages. 2.Defective products must be returned within 30 days. 3.Customers must contact us first for the return address. 4.In all cases, buyers pay for the shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. 5.Please kindly feel free to contact us first, if you receive the items with quality problems or damaged, we would like to offer replacement or refund service for you. About us Who are we? Founded in 2015, Anycubic has become one of the most popular 3D printer brands in the market, with around 300 employees based in Shenzhen, China.But, we didn’t start fancy as it seems to look today.  “Graduated in 2015, I came back to China from New Zealand. I was so excited and full of curiosity when landed in Shenzhen the first time”, Mr. James Ouyang, co-founder of Anycubic and a Ph.D of University of Auckland said. “Lu Ouyang, Anycubic’s Founder and CEO, is my childhood friend. He had a company before Anycubic providing electronic modules and 3D printer accessories for over 4 years.” “3D printer itself wasn’t our first choice. We hadn’t even had the confidence to rush in. But after seeing clients increasingly relying on us for key components of their DIY printers, We realized we could do it, and do it much better.”  “I didn’t think much but only hope to explore more possibilities with the 3D printing technology. There is nothing to be afraid of. So why not make a difference.” Ouyang a

- - - - - - - - - Store category Sign Up Now ! You may also like ANYCUBIC FDM 3D Printer I3 Mega-S Impresora 3D+2KG PLA 1.75mm Filament Metal ES Product Description ANYCUBIC FDM 3D Printer I3 Mega-S Impresora 3D+2KG PLA 1.75mm Filament Metal ES     ANYCUBIC MEGA-S Impresora 3D Printer:      There are 2KG PLA Filament, random color    Especificaciones técnicas ● Tecnología de impresión: FDM (Modelado de deposición fundida) ● Gran volumen de construcción: 210 x 210 x 205 mm. ● Precisión de posicionamiento: X / Y 0.0125 mm Z 0.002 mm ● Materiales de impresión compatibles: TPU, PLA, ABS, HIPS, madera ● Estructura completamente rígida en metal sólido y estabilidad superior. ● Impresión precisa y de alta calidad con una resolución de capa de hasta 50 micras. ● Ultrabase para una excelente adhesión y fácil extracción de componentes. ● Auto reanuda la impresión después de un corte de energía ● Extrusión Titan de alta calidad para imprimir filamentos flexibles. ● Soporte de la bobina suspendida (filamento) ● Formatos de entrada:.STL,.OBJ,.DAE,.AMF ● Temperatura ambiente de funcionamiento: 8ºC - 40ºC ● Conectividad de tarjeta SD, puerto USB (solo usuarios expertos) ● Peso de la caja: 16,5 kg. Payment Delivery details Terms of sales About us Contact us Payment 1, We accept PayPal payment only. 2, Payment must be within 8 days after you ordered the item. Delivery details 1.We cannot arrange shipments on weekend or public holidays. 2.Your orders will be shipped out within 2 business days after payment received. 3.Please be advised that the international delivery time highly depends on your local customs and post services policy. 4.We can ship your orders only to your confirmed Paypal address. Your address and full name on Paypal must match your shipping address. Please make sure payment address in PayPal is correct. 5.Please feel free to contact if you would like the DHL or Fedex shipping. And pay attention to the custom policy, we do not undertake the tariff, hope for your kindly understanding.  6.Please NOTE that seller will not pay the local customs cost when the package arrive destination country.  Terms of sales 1.The returns should be returned with our original packages. 2.Defective products must be returned within 30 days. 3.Customers must contact us first for the return address. 4.In all cases, buyers pay for the shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. 5.Please kindly feel free to contact us first, if you receive the items with quality problems or damaged, we would like to offer replacement or refund service for you. About us Who are we? Founded in 2015, Anycubic has become one of the most popular 3D printer brands in the market, with around 300 employees based in Shenzhen, China.But, we didn’t start fancy as it seems to look today.  “Graduated in 2015, I came back to China from New Zealand. I was so excited and full of curiosity when landed in Shenzhen the first time”, Mr. James Ouyang, co-founder of Anycubic and a Ph.D of University of Auckland said. “Lu Ouyang, Anycubic’s Founder and CEO, is my childhood friend. He had a company before Anycubic providing electronic modules and 3D printer accessories for over 4 years.” “3D printer itself wasn’t our first choice. We hadn’t even had the confidence to rush in. But after seeing clients increasingly relying on us for key components of their DIY printers, We realized we could do it, and do it much better.”  “I didn’t think much but only hope to explore more possibilities with the 3D printing technology. There is nothing t

- - - - Description -   - Features: - 1.Ergonomically designed, optical tracking technology, working on many different surfaces and ideal usage for home, office or game.   - 2.Wireless 2.4 GHz  mouse, comfortable touch. - 3.Rolling line by line up and down - 4.Low-voltage alarming function - 5.Plug and play mode, no need driver - 6.The dongle can be stored into the mouse neatly when it is not used - 7.Receiver storage space and carrying easily   - 8.System support: Windows 2000, Windows XP, Windows 7, Windows Vista, Windows 98, Mac OS, Windows ME, Windows 8  - Specifications: - Type: Wireless Mouse - Design:Ergonomic Mouse - Color Of Mouser:White 6D USB Wireless Mouse 2.4GHz Game Ergonomic Design Vertical Mouse 1600DPI White Description   Features: 1.Ergonomically designed, optical tracking technology, working on many different surfaces and ideal usage for home, office or game.   2.Wireless 2.4 GHz  mouse, comfortable touch. 3.Rolling line by line up and down 4.Low-voltage alarming function 5.Plug and play mode, no need driver 6.The dongle can be stored into the mouse neatly when it is not used 7.Receiver storage space and carrying easily   8.System support: Windows 2000, Windows XP, Windows 7, Windows Vista, Windows 98, Mac OS, Windows ME, Windows 8  Specifications: Type: Wireless Mouse Design:Ergonomic Mouse Color Of Mouser:White Power Supply: 2 x AAA Battery (Not Including) Mouse Demension: 125*65*82mm Adjustable DPI: 800-1200-1600 Button: 5 Buttons (Not Including Scoller)   Package Included: 1 x vertical mouse 1 x usb receiver   Note: 1.This mouse backward button and forward button cannot be used for Macbook and Apple Computer. 2.This mouse has a sleep function, 3-5 minutes is normal sleep, shake the mouse can wake up, 8-10 minutes is deep sleep, need to press the left and right keys to wake up.   Item SpecificsType:Vertical MouseBrand:UnbrandedInterface:USBMPN:Does Not ApplyMax. DPI:1600Features:ErgonomicColour:WhiteEAN:Does not apply Payment We ONLY accept PayPal, Other payment methods are NOT accepted.   Payment MUST BE MADE within 5 business days after the end of the aution, Unpaid dispute will be filed to for the non payable bidders. Shipping - We ship to PayPal's address ONLY. Please make sure your address in PayPal is matched with your shipping address before you pay. - Item will be sent out by Air mail within 24-48 hours after clear payment (excluding weekend & holiday).  Arrival time (estimated): - United Kingdom 10-25 working days  - Shipping time is only estimated and not guaranteed. If not get item after 30 days, please contact us for solve. Returns We can exchange the item within 30 days after you received it if it is defective. Returned item must have all original packaging and accessories. Buyer are responsible for the returning shipping costs under any circumstances. It may take up to 5 business days to process your return after we receive your product. We don't offer combine shipping. Customer Service We will send it as a personal gift with a low value. But if there exits any tariff, you will pay for it.   If you have any questions please contact us before you leave us neutral or negative feedback, we will try our best to resolve the problem. We will greatly appreciate for your cooperation.   Due to the difference of time zone, sometimes the reply to your message will be delayed with 24 hours (excluding weekend & holiday). Shop Category  Store Home  Electronics  ◈  Sound & Vision  ◈  Computers & Tablets  ◈  Mobile Phones & Communication  ◈  Video Games & Consoles  ◈  Cameras & Photography Equip