Cartridge w

MUSICAL FIDELITY A5  POWERFULL 250 W RMS CHANEL  INTEGRATED REMOTE CONTROL AMPLIFIER  VERY GOOD CONDITION     ONLY A LITTLE SCHOCK ON THE LEFT HAND GRIP EXCELLENT PHONO  ENTER FOR TURNTABLE WITH MM CARTRIDGE  CAN DRIVE ANY TYPE OF LOUDSPEAKER WITH MAESTRIA  DELIVERED WITH PDF NOTICE AND REMOTE CONTROL SHIPPING COST FOR E.U    NO PAYPAL  Specifications Power output: 250 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.01% Damping factor: 140 Input sensitivity: 2.5mV (MM), 330mV (line) Signal to noise ratio: 96dB (MM), 100dB (line) Channel separation: 70dB (line) Dimensions: 440 x 125 x 400mm Weight: 16.6kg Accessories: mains lead, remote control

Pioneer Pla-25 in excellent condition with original headshell. A combination of Superb Sound and easy Automatic operation. First,in this finecomponent, you get the best, the steadiest system ever devised to achieve steady turntable platter revolution - the belt drive. Adding to the steadlness is the aluminum alloy die-cast platter with its big 12" diameter. Very important, there is a system of automatic devices for the tonearm - auto lead-in, auto return, cut and repeat, making for very easy operation. The arm also has a lateral balancer for better stereo balance. The IM cartridge provides excellent response, and the entire unit is mounted in an attractive walnut cabinet. the finest Drive System The PL-A25 employs a quality outer rotor hysteresis synchronous motor for constant turntable speed. The 12" aluminum alloy die-cast turntable, with its rock-steady flywheel action, is driven by a precision-made polyurethene belt that is unaffected by temperature, oil or humidity. The result is a high signal to noise ratio; wow and flutter are reduced to inaudible levels, and the overall sound is excellend The PL-A25 is mounted in an oil-finished walnut cabinet with smoked acryl dust cover, styled to add eleganceto any interior. The cabinet is provided with rubber "feet" to absorb vibrations and shocks, preventing howling or needle skipping. Improved Tone-arm The PL-A25 employs a newly developed straight tonearm, designed to be used with light weight stylus pressure for high compliance by reducing the weight of the tonearm itself and increasing the sensitivity of the pivot. The tonearm is provided with a lateral balancer for balanced stereo reproduction. It preventd drift of the tonesrm toward the outside or inside of the turntable. The tonearm is easily lowered and raised by the oil-damped arm lift to protect the valuable stylus records. Specifications Drive System: belt-drive system Drive Motor: 4-pole outer rotor hysteresis synchronous motor Turntable: 12" alloy die-cast platter Speed: 33-1/3 and 45 rpm Tonearm: static-balanced tubular tonearm Cartridge: PC-35 (magnet type) Stylus: PN-35 (0,5 mil diamond) Stylus pressure: 2 - 3 grams Output Voltage: 3,5 mV (at 1 kHz, 50 mm/sec) Separation: better than 20 dB (at 1 kHz) Frequancy Response: 10 to 25, 000 Hz Signal-to-Noise ratio: better than 46 dB Wow and Flutter: less than 0,1% Power Requirement: 110,117, 130, 220 or 240 V AC 50 or 60 Hz Power Consumption: 14 VA (12 W) Dimensions (whd): 440 x 170 x 350 mm (17-5/16" x 6-11/16" x 13-3/4") Weight: 7,5 kg (16 lb 8 oz)

Rare, années 50.... Bras de lecture Ortofon SK-212 complet avec cellule mono Ortofon type C (diamant en très bon état) + Transformateur Jorgen Schou JS Step Up type 0,32M N° 251 pour cellule MC ! Ratio 1:365 Prim. Winding 1,5 ohm Sec. Winding 200 ohm L'ensemble est câblé, aucun fil n'a été coupé, vendu catégorie pour pièces, aucun retour Welcome Offers ! Rare, 50s.... Ortofon SK-212 tonearm complete with Ortofon mono cartridge type C (diamond in very good condition) + Jorgen Schou JS Step Up transformer type 0.32M No. 251 for MC cartridge! Ratio 1:365 Prim. Winding 1.5 ohm Sec. Winding 200 ohm The set is wired, no wires have been cut, sold in the parts category, no returns Ofertas de bienvenida ! Raro, años 50.... Brazo Ortofon SK-212 completo con cápsula mono Ortofon tipo C (diamante en muy buen estado) + Transformador elevador Jorgen Schou JS tipo 0.32M No. 251 para celda MC! Relación 1:365 Remilgado. Bobinado 1,5 ohmios Seco. Bobinado 200 ohmios El conjunto está cableado, no se han cortado cables, se vende categoría por piezas, no se permiten devoluciones idem Vincent, Kef, Sony, Technics, Atoll, Copland, Jbl, Synthesis, Cello, Viola, Mark Levinson, Roksan, Metaxas, Goldmund, Dynavector audio, Technica, Linn, Accuphase, Magico, Alnico, Plinius, Audiomat, Revel, Boston, Luxman, Harbeth, STENHIEM ALUMINE, Triangle, Altec, Goto, Conrad Johnson, Esoteric, Vpi, Proac, Mbl, Mulidine, Nakamichi, Manley, Rega, Radford, Sansui, Sae, Bb'&'W, Pioneer, Bowers b'&' Wilkins, Imf, Cabasse, Jmlab, Focal, JMR, Klipsch, McIntosh, Cyrius, JMR, BC Acoustique, Electrocompaniet, Micromega, Marantz, Denon, Onkyo, Rogers, Audio Research, Acoustic Research, Advance Acoustic, Krell, Sonos, Jadis, Moon, Bel Canto, Devialet, Perreaux, Emotiva, Tannoy, Gryphon,Rotel, Thorens, Bose,NAD, Harman kardon, Yamaha... En savoir plus Collaboration commerciale.

Up for sale is a near mint example of the latest and greatest Audio Analogue AA Phono Stage. Picking up where the Aria left off, the AA Phono preserves the Audio Analogue house sound (fluid and tonally rich, with a touch of tube like warmth - but solid-state speed and bass depth), but adds extra soundstage width, focus, and much blacker, quieter backgrounds. Flexibility is top notch with absolutely every possible cartridge load and capacitance catered for - including very low output MC cartridges. Setup is very quick and easy via two rows of switches on either side of the unit, right below the front plate. Build quality is second to none, both inside (3 toroidal transformers, dual mono construction, high quality subsonic filter and shielding) and outside (the design, fit and finish are a joy for the eyes). Specs are as follows: - MM gain (@1KHz) - 40 dB - MC gain (@1KHz) - 65 dB - Frequency response (+/-0.25dB) - 10Hz - 20KHz - MM signal/noise ratio - 89 dB - MC signal/noise ratio - 72 dB - Standby power consumption (230VAC) - 0.7 W - Dimensions (H x W x D) - 87 x 220 x 372 mm - Weight - 5.8kg The unit will come professionally packaged, although without original box or manual. It was meant for a fourth (...) system which will in fact not happen. Any questions please ask. Thanks for looking !

Transrotor ZET-1 - White glossy. État : Occasion Fabriqué en Allemagne Platine vinyle Dimensions (H x L x P)180 x 450 x 400 mm Poids 24 kg Alimentation Bloc externe Fonctionnement Manuel Moteur Faible bruit, déporté Vitesses 33 et 45 tours à commutation manuelle Châssis Acrylique Plateau Épaisseur 60 mm, aluminium massif 10 kg Cellule Transrotor Uccello Bras Transrotor 800-S Garantie constructeur 2 ans Transrotor ZET 1 Turntable - READY TO PLAY Special offer for our showroom set TECHNICAL DATA TRANSROTOR ZET-1 TURNTABLE, complete: - chassis black acrylic 25 mm thick - includes JELCO TS-350S tonearm - includes DIN 5-pin > RCA arm cable - option (+850 euros): 10" Helius Omega Ruby tonearm with silver internal arm wiring and ruby bearings - includes TR Uccello MM cartridge - separated motor with separate PSU - magnetic decoupling (TMD for motor drive belt > platter bearing)  - aluminium platterweight - dimensions in cm: 45 W x 40 D x 18 H - 3 adjustable spiked feet - weight approx. 24 kg (turntable only).

X-RARE JVC MF-55LS Hi-Fi 3 IN 1 Music System This is a fantastic audio system from 1971 made by JVC in Japan. The cassette deck section is a one motor unit with mechanically controlled transport. It has manual EQUALIZER and BIAS selection for Normal, Fe-Cr and Chrome tapes. Recording level is manually adjustable with two needle type VU meters. ​Instead of Dolby noise reduction this unit uses a JVC proprietary noise reduction system, the ANRS (Automatic Noise Reduction System) and the Super ANRS. The turntable section is a belt drive manual unit with S tonearm and a JVC cartridge. The radio section uses a beautiful tuning scale that stretches across the front edge of the unit. The amplifier delivers 25 W/channel @ 4 ohm. For an external source there is an auxiliary input at the back and there is provision for two sets of loudspeakers, one set for DIN plugs and the other one for bare wire. SUPERBE CONDITION Des traces d’usage peuvent apparaître, mais très peu sur le plexi, voir mes photos et video: Traces of use may appear, but very few on the perplex, please watch my photos and video: Coming soon REVISE / SERVICED FONCTIONNEMENT COMPLET / FULLY WORKING COURROIES NEUVES (Platine cassette et disque) / NEW BELTS (Cassette deck and turntable) VITESSE REGULEE 1000Hz / SPEED CONTROL 1000Hz POTENTIOMETRES ET CONTACTS DESOXYDES / DEOXIDIZED POTENTIOMETERS AND CONTACTS NETTOYEE / CLEANED REGLEE ET TESTEE / TUNED AND TESTED Please note: Un affinement des réglages peut s'avérer nécessaire lors de l'installation de la platine, principalement mettre le saphir et la cellule avec précaution An adjustement of the setup might be necessary when installing the turntable, mainly put the head and saphir with caution Câble d'alimentation / Power cable LIVRAISON A LA MAISON EN EMBALLAGE SECURISE ET ASSURE COLISSIMO / CHRONOPOST / UPS DELIVERY AT HOME INTO SAFE AND INSURED PACKAGING WORLWIDE DELIVERY

PRE-AMP SECTION Phono input Input impedance (R and C) 47kohms / 100pF Input sensitivity, 1kHz     MM 2.7mV ref. 0.5V    MC 180μV Signal/Noise ratio (A-weighted with cartridge connected) MM 75dB ref. 5mV    MC 73dB ref. 0.5mV RIAA response accuracy (20Hz - 20kHz) ±0.5dB Line level inputs Input impedance (R and C) 20kohms / 220pF Input sensitivity (ref. 1W) 180mV Maximum input signal >25V Signal/Noise ratio (A-weighted ref 1W) 90dB Frequency response 20Hz - 20kHz / ±0.5dB Tone controls Treble ±7dB at 10kHz Bass ±10dB at 50Hz POWER AMP SECTION Continuous output power into 8ohms * 25W (14dBW) Rated distortion (THD 20Hz - 20kHz) 0.02% Clipping power (maximum continuous power per channel) 30W IHF Dynamic headroom at 8ohms +3dB IHF dynamic power (maximum short term power per channel) 8ohms 50W    4ohms 55W    2ohms 70W Input impedance 11kohms Input sensitivity (for rated power into 8ohms) 1V Frequency response 10Hz - 70kHz THD (20Hz - 20kHz) Remote No PHYSICAL SPECIFICATIONS Dimensions (W x H x D) 420 x 96 x 240mm Net weight 5.3kg Shipping weight 6.7kg Power consumption (120 ~ 240V, 50/60Hz) 150VA