-
loading
Avec photo

Colors backlit aluminum


Liste des meilleures ventes colors backlit aluminum

France (Toutes les villes)
Logitech CREATE iPad Pro 12.9   Keyboard Case | Create with Wireless Backlit Keyboard and 1st Generation Smart Connector QWERTY ENG NEW Screen size: 12.9 inch Developed in partnership with Apple, it is exclusive for iPad Pro State-of-the-art connection: Connects to your iPad Pro using Apple's Smart Connector, no Bluetooth pairing required, no charging required Logitech's best iPad keyboard: full-size layout, adjustable-backlit full-size keys Additional row of function keys with iOS shortcuts (home, adjust screen brightness, search, change language, adjust keypad brightness, media controls, volume controls, turn on / off sleep mode) 'iPad) Total protection, beautiful design: the adapted curves and the premium structure in oxidized aluminum protect the iPad Pro from bumps and scratches Auto sleep mode: lets you use your iPad Pro and keyboard at all times
138 €
Voir le product
Strasbourg (Bas Rhin)
ThinkVision T2224d 21.5-inch LED Backlit LCD Monitor FEATURES AND BENEFITS - 21.5 " WLED VA panel - Digital Controls with 8 languages new OSD - Wide format 1920 X 1080 DDC 2B, DDC/CI, EDID1.3 - VGA + DP - ISO 9241-307&CECP - Support mode for different aspect (16:9, 4:3) - Energy Star 7.0/China Energy standard Tier 1 - TCO7.0/TCO Edge 2.0 - EURoHS /ChinaRoHS/TurkeyRoHS/ - UkraineRoHS - Lenovo 41A7731/ 41A7733 compliance - EPEAT Gold/ VOC test/ULE Gold - Tiny support TECHNICAL INFORMATION/ PERFORMANCE SPECIFICATIONS - Monitor Size (Active Area Size): 21.5 inch (476.064mm (H) x267.786 (V)) - Viewable image size: 21.5 inch - Maximum viewable area: (H x V): 476.064mm (H) x 267.786 (V) - Native Resolution: 1920 x 1080 - Contrast ratio (typical): 3000: 1 - Brightness (typical): 250 cd/m2 - Aspect Ratio: 16:9 - Pixel pitch: 0.24795 x 0.24795 - Colors: 16.7 million - Horizontal viewing angle: 178 degrees (at 10:1 contrast ratio) - Vertical viewing angle: 178 degrees (at 10:1 contrast ratio) - Response time (extreme, typical, off): 4ms / 7ms / 22ms - Video input: VGA, DP - Signal cable - VGA: 1.8 m - Signal cable – DP: 1.8 m - SYNC Type: Separate TTL - SYNC on Green: No - Bezel width (left & right): 17.6 mm - Bezel width (top): 17.6 mm - Bezel width (bottom): 25.6 mm - Tilt: -5~22 degree - Swivel: no - Lift: no - Pivot no - Soundbar Attachment: NO - VESA mount: 100 x 100 mm - Kensington lock slot: Yes - OSD: Yes - OSD languages: 8 - Preset display modes: 22 - User-defined display modes: 22 - VESA DDC capable: 2B/CI - Power supply: Internal power adapter - Power cord: 1.8 m - ISO 9241-307 compliant: Yes - EU Directive 2002/96/EC - WEEE - EU Directive 2002/95/EC – RoHS - ErP - Standard: COMMISSION REGULATION (EC) No 1275/2008 (ANNEX I point 2 for ITE product)
60 €
Voir le product
Féternes (Haute Savoie)
Very fast computer with the quad core I7 and the SSD. Even if it has a few years it's still incredibly fast ! Coming with the magsafe charger and a neoprene sleeve. Possibility to replace the superdrive with a second hard drive. I can do it with an extra 320Gb or a 500Gb to discuss. I used to work at Apple so it'll be professionaly done. I've just replaced the battery so it has under 20 cycles. It's a third party one and you have to know it takes way more time to charge than the original one. If you use it mostly at your desk that's not an issue. Other than that everything works great. QWERTY Ordinateur très puissant avec son I7 quadri-coeur couplé au SSD. Malgré ses années, cette machine est toujours incroyablement rapide ! Livré avec le chargeur Magsafe et un étui en néoprene. Possibilité de remplacer le superdrive par un 2em disque dur. J'ai au choix un 320Gb et un 500Gb, à discuter. J'ai travaillé chez Apple, ça sera donc fait de manière professionnelle. Je viens de remplacer la batterie donc elle à moins de 20 cycles. C'est une batterie d'un vendeurs tiers alors il faut savoir qu'elle est beaucoup plus lente à charger que celle d'origine. Si vous utiliser l'ordinateur la plupart du temps au bureau ça n'a aucune incidence. A part ça, tout fonctionne parfaitement. Clavier QWERTY Full specs: MacBook Pro (15-inch, Late 2011) - Technical Specifications Size and weight - Height: 0.95 inch (2.41 cm) - Width: 14.35 inches (36.4 cm) - Depth: 9.82 inches (24.9 cm) - Weight: 5.6 pounds (2.54 kg)1 Connections and expansion - MagSafe power port - Gigabit Ethernet port - FireWire 800 port (up to 800 Mbps) - Two USB 2.0 ports (up to 480 Mbps) - Thunderbolt port (up to 10 Gbps) - Audio line in - Audio line out - SDXC card slot - Kensington lock slot Communications - Wi-Fi wireless networking2 (based on IEEE 802.11n specification); IEEE 802.11a/b/g compatible - Bluetooth 2.1 + EDR (Enhanced Data Rate) wireless technology - 10/100/1000BASE-T Gigabit Ethernet (RJ-45 connector) Audio - Stereo speakers with subwoofers - Omnidirectional microphone (located under left speaker grille) - Audio line in minijack (digital/analog) - Audio line out/headphone minijack (digital/analog) - Support for Apple iPhone headset with microphone Environmental Status Report MacBook Pro is designed with the following features to reduce its environmental impact: - Highly recyclable aluminum and glass enclosure - Mercury-free LED-backlit display - Arsenic-free display glass - BFR-free - PVC-free3 - Energy Efficient Ethernet - Reduced packaging volume - Meets ENERGY STAR Version 5.2 requirements - Rated EPEAT Gold4 Display - 15.4-inch (diagonal) LED-backlit glossy or optional antiglare widescreen display with support for millions of colors - Supported resolutions: 1440 by 900 (native), 1280 by 800, 1152 by 720, 1024 by 640, and 800 by 500 pixels at 16:10 aspect ratio; 1024 by 768, 800 by 600, and 640 by 480 pixels at 4:3 aspect ratio; 1024 by 768, 800 by 600, and 640 by 480 pixels at 4:3 aspect ratio stretched; 720 by 480 pixels at 3:2 aspect ratio; 720 by 480 pixels at 3:2 aspect ratio stretched Graphics and video support - AMD Radeon HD 6770M graphics processor with 1GB of GDDR5 memory. - Intel HD Graphics 3000 with 512MB of DDR3 SDRAM shared with main memory5 - Automatic graphics switching - Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on an external display, both at millions of colors - FaceTime HD camera - Thunderbolt port Thunderbolt digital video output - Native Mini DisplayPort output - DVI output using Mini DisplayPort to DVI Adapter (optional) - VGA output using Mini DisplayPort to VGA Adapter (optional) - Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter supp
620 €
Voir le product
Paris (Paris)
EN: Macbook Pro Retina 15" / 500 GB / 2.3 GHz / Late 2013.  - See machine specs below - Sterilised with 70% alcohol as per Apple instructions - Replacements: Screen (May 2019), Charger (June 2020) - QWERTY keyboard, but (new) AZERTY key stickers included complimentary. - No visible marks, except for a few light scratches on bottom of case. - Issues:  - Left USB not functional, but Right USB works perfect. - Left speaker not functional, but Right works perfect. - Crack in plastic hinge casing (superficial, doesn’t affect hinge mechanism) See photo.  - **Replacement part included complimentary** - Otherwise a perfectly functional, very powerful machine.  - The same specs on a new machine today costs 2700 € - 3000 €+ FR: Macbook Pro Retin 15" / 500 GB / 2.3 GHz / Fin 2013. État: Occasion - Nettoyé à l'alcool 70% selon les consignes de stérilisation Apple - Écran remplacé à neuf en mai 2019 - Chargeur remplacé à neuf en juin 2020 - Pas des marques d’usure visibles, a part quelques rayures fin en sous la machine. - Port USB gauche = non fonctionnel (voir image ci-jointe). Celle de droite fonction parfait. - Haut parler gauche = non fonctionnel. - Fissure superficielle sur la barrette de cache charnière, côté gauche (voir image ci-jointe). - Cela n'empêche pas la fonctionnalité de la charnière. - **Partie de remplacement inclus gratis** - Cause: abimé en enlevant la coque de protection pour prendre des photos pour cette annonce! - Clavier QWERTY d’origine / autocollants AZERTY (neuf) inclus gratis. - Autrement parfaitement fonctionnel, très puissant.  - Un MacBook Pro 15" vaut entre 2700 € et 3000 €+ neuf aujourd'hui. SPECIFICATIONS: General: - Late 2013  - 15"  - 512 GB storage  - 2.3 GHz Quad-Core Intel Core i7  - 16 GB 1600 MHz DDR3 - NVIDIA GeForce GT 750M 2 GB / Intel Iris Pro 1536 MB Display - Retina display: 13.3-inch (diagonal) LED-backlit display with IPS technology; 2560-by-1600 resolution at 227 pixels per inch with support for millions of colors - Native resolution: 2560 by 1600 pixels (Retina); scaled resolutions: 1680 by 1050, 1440 by 900, and 1024 by 640 pixels Size and Weight - Height: 0.71 inch (1.8 cm) - Width: 12.35 inches (31.4 cm) - Depth: 8.62 inches (21.9 cm) - Weight: 3.46 pounds (1.57 kg)2 Graphics and Video Support - Intel Iris Graphics - Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, both at millions of colors - Thunderbolt digital video output - Native Mini DisplayPort output - DVI output using Mini DisplayPort to DVI Adapter (sold separately) - VGA output using Mini DisplayPort to VGA Adapter (sold separately) - Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately) - HDMI video output - Support for 1080p resolution at up to 60Hz - Support for 3840-by-2160 resolution at 30Hz - Support for 4096-by-2160 resolution at 24Hz Camera - 720p FaceTime HD camera Connections and Expansion - MagSafe 2 power port - Two Thunderbolt 2 ports (up to 20 Gbps) - Two USB 3 ports (up to 5 Gbps) - HDMI port - Headphone port - SDXC card slot - Apple Thunderbolt to FireWire Adapter (sold separately) - Apple Thunderbolt to Gigabit Ethernet Adapter (sold separately) Wireless - Wi-Fi 802.11ac Wi‑Fi wireless networking;3 IEEE 802.11a/b/g/n compatible - Bluetooth Bluetooth 4.0 wireless technology Audio - Stereo speakers - Dual microphones - Headphone port - Support for Apple iPhone headset with remote and microphone - Support for audio line out (digital/analog) Keyboard and Trackpad - Full-size backlit keyboard with 78 (U.S.) or 79 (ISO) keys, including 12 function keys and 4 arrow keys (inverted "T" arrangement) with ambient light sensor - Multi‑Touch trackpad for precis
301 €
Voir le product
Paris (Paris)
Special Deal C Grade Cosmetic Condition But 100 Percent Fully Working and Tested Package inlcuding: Macbook Pro 13inch Laptop(2012) i5 2.5GHz 4GB RAM 250GB HDD Power Adapter MacBook Pro (13-inch, Mid 2012) - Technical Specifications Display 13.3-inch (diagonal) LED-backlit glossy widescreen display with support for millions of colors Supported resolutions: 1280 by 800 (native), 1152 by 720, 1024 by 640, and 800 by 500 pixels at 16:10 aspect ratio; 1024 by 768, 800 by 600, and 640 by 480 pixels at 4:3 aspect ratio; 1024 by 768, 800 by 600, and 640 by 480 pixels at 4:3 aspect ratio stretched; 720 by 480 pixels at 3:2 aspect ratio; 720 by 480 pixels at 3:2 aspect ratio stretched Processor 2.5GHz dual-core Intel Core i5 processor (Turbo Boost up to 3.1GHz) with 3MB L3 cach 2.5GHz 4GB of 1600MHz DDR3 memory Storage 2.5GHz 500GB 5400-rpm hard drive Size and Weight Height: 0.95 inch (2.41 cm) Width: 12.78 inches (32.5 cm) Depth: 8.94 inches (22.7 cm) Weight: 4.5 pounds (2.06 kg)2 Graphics and Video Support Intel HD Graphics 4000 Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on an external display, both at millions of colors Thunderbolt digital video output Native Mini DisplayPort output DVI output using Mini DisplayPort to DVI Adapter (sold separately) VGA output using Mini DisplayPort to VGA Adapter (sold separately) Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately) HDMI audio and video output using third-party Mini DisplayPort to HDMI Adapter (sold separately) Camera 720p FaceTime HD camera Connections and Expansion MagSafe power port Gigabit Ethernet port FireWire 800 port (up to 800 Mbps) Two USB 3 ports (up to 5 Gbps) Thunderbolt port (up to 10 Gbps) Headphone port SDXC card slot Kensington lock slot 8x SuperDrive Wireless 802.11n Wi-Fi wireless networking;3 IEEE 802.11a/b/g compatible Bluetooth 4.0 wireless technology Audio Stereo speakers with subwoofer Stereo speakers with subwoofer Omnidirectional microphone Headphone port Support for Apple iPhone headset with remote and microphone Support for audio line out (digital/analog) Keyboard and Trackpad Full-size backlit keyboard with 78 (U.S.) or 79 (ISO) keys, including 12 function keys and 4 arrow keys (inverted “T” arrangement) with ambient light sensor Multi-Touch trackpad for precise cursor control; supports inertial scrolling, pinch, rotate, swipe, three-finger swipe, four-finger swipe, tap, double-tap, and drag capabilities Battery and Power Up to 7 hours wireless web Built-in 63.5-watt-hour lithium-polymer battery 60W MagSafe Power Adapter with cable management system;
403,45 €
Voir le product
Saint Jean de Luz (Pyrénées Atlantiques)
MacBook Air début 2014 acquis en septembre 2014. Disque dur SSD de 256 Go. Mémoire vive 4 Go. Processeur Intel Double Coeur I5 à 1,4 Ghz. Cet ordinateur est en parfait état de fonctionnement: on notera cependant que la batterie d'origine compte 910 cycles de charge (mais état normal et pas à remplacer: l'ordinateur fonctionne en mobilité sur la batterie environ 3 heures sans recharge électrique). Le port USB gauche ne fonctionne pas, seul le port USB droit fonctionne. L'un des patins sur le dessous du Mac a été recollé. Très peu de rayures, écran en parfait état, toutes les fonctionnalités de l'ordinateur sont en parfait état de marche. Ordinateur vendu avec son câble de recharge électrique mais sans la boite d'origine. Bonnes enchères à tous ! Voici les caractéristiques techniques de ce MacBook Air: MacBook Air (13-inch, Early 2014) - Technical Specifications Display §  13.3-inch (diagonal) LED-backlit glossy widescreen display with support for millions of colors §  Supported resolutions: 1440 by 900 (native), 1280 by 800, 1152 by 720, and 1024 by 640 pixels at 16:10 aspect ratio and 1024 by 768 and 800 by 600 pixels at 4:3 aspect ratio Storage1 §  128GB 128GB PCIe-based flash storage §  256GB 256GB PCIe-based flash storage Configurable to 512GB flash storage. Processor §  1.4GHz dual-core Intel Core i5 (Turbo Boost up to 2.7GHz) with 3MB shared L3 cache Configurable to 1.7GHz dual-core Intel Core i7 (Turbo Boost up to 3.3GHz) with 4MB shared L3 cache. Memory §  4GB of 1600MHz LPDDR3 onboard memory Configurable to 8GB. Battery and Power2 §  Up to 12 hours wireless web §  Up to 12 hours iTunes movie playback §  Up to 30 days standby time §  Built‑in 54‑watt‑hour lithium‑polymer battery §  45W MagSafe 2 Power Adapter with cable management; MagSafe 2 power port Size and Weight §  Height: 0.11-0.68 inch (0.3-1.7 cm) §  Width: 12.8 inches (32.5 cm) §  Depth: 8.94 inches (22.7 cm) §  Weight: 2.96 pounds (1.35 kg)3 Graphics and Video Support §  Intel HD Graphics 5000 §  Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on an external display, both at millions of colors §  Thunderbolt digital video output o   Native Mini DisplayPort output o   DVI output using Mini DisplayPort to DVI Adapter (sold separately) o   VGA output using Mini DisplayPort to VGA Adapter (sold separately) o   Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately) o   HDMI audio and video output using third-party Mini DisplayPort to HDMI Adapter (sold separately) Camera §  720p FaceTime HD camera Connections and Expansions §  Headphone §  Dual mics §  Two USB 3 ports (up to 5 Gbps) §  Thunderbolt port (up to 10 Gbps) §  MagSafe 2 power port §  SDXC card slot Wireless §  Wi-Fi 802.11ac Wi-Fi networking;4 IEEE 802.11a/b/g/n compatible §  Bluetooth Bluetooth 4.0 wireless technology Audio §  Stereo speakers §  Dual microphones §  Headphone port §  Support for Apple iPhone headset with remote and microphone Keyboard and Trackpad §  Full-size backlit keyboard with 78 (U.S.) or 79 (ISO) keys, including 12 function keys and 4 arrow keys (inverted “T” arrangement) with ambient light sensor §  Multi-Touch trackpad for precise cursor control; supports inertial scrolling, pinch, rotate, swipe, three‑finger swipe, four-finger swipe, tap, double-tap, and drag capabilities
10,5 €
Voir le product
France (Toutes les villes)
Vous Pouvez Aussi Aimer - Tête d'impression Printhead pour iX4000 iX5000 iP3100 iP3000 MP710 MP730 MP740 55.19 EUR Free shipping - Tête d'impression Printhead pour 9100i S9000 S900 i9100 F9000 F900 QY6-0039 57.59 EUR Free shipping - Tête d'impression pour WF7610 WF7620 WF7611 WF7111 WF7621 WF3641 WF7710 A 65.99 EUR Free shipping - Tête d'impression Printhead pour i9900 I9950 IP8600 Pro900 9900i Mark II S 107.99 EUR Free shipping - Tête d'impression pour Epson WF-2630 L300 L301 XP315 XP415 ME401 ME303 WF-2520 59.99 EUR Free shipping - Tête d'impression pour HP 932 933 XL OfficeJet 7110 7610 7612 7600 6060e 6100e 57.59 EUR Free shipping - QY6-0075 Tête d'impression pour MP770 MP790 PIXMA MP750 MP760 860I 865R QY6-0049 41.99 EUR Free shipping - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the pl En savoir plus Collaboration commerciale.
Voir le product
France (Toutes les villes)
Vous Pouvez Aussi Aimer - Tête d'impression Printhead pour PIXMA PRO9500 Mark II nozzle QY6-0077 S 141.59 EUR Free shipping - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping - Tête d'impression pour Epson WF-2630 L300 L301 XP315 XP415 ME401 ME303 WF-2520 59.99 EUR Free shipping - Tête d'impression Printhead pour iX4000 iX5000 iP3100 iP3000 MP710 MP730 MP740 55.19 EUR Free shipping - QY6-0072 Tête d'impression Printhead pour iP4600 iP4680 iP4700 4760 MP630 S 45.59 EUR Free shipping - F173030 Tête d'impression pour epson 1390/1400/1410/1430/1500W R260 S 176.39 EUR Free shipping - QY6-0055 Tête d'impression Printhead pour i9900 iP8500 9950 ip9100 PRO9000 S 79.19 EUR Free shipping - Tête d'impression pour WF7610 WF7620 WF7611 WF7111 WF7621 WF3641 WF7710 A 65.99 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do n En savoir plus Collaboration commerciale.
Voir le product
France (Toutes les villes)
Vous Pouvez Aussi Aimer - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping - Tête d'impression pour HP 932 933 XL OfficeJet 7110 7610 7612 7600 6060e 6100e 57.59 EUR Free shipping - QY6-0075 Tête d'impression pour MP770 MP790 PIXMA MP750 MP760 860I 865R QY6-0049 41.99 EUR Free shipping - Tête d'impression Printhead Full Color pour PIXMA iP100 IP110 S 62.39 EUR Free shipping - 952 955 Tête d'impression pour HP Officejet Pro 8710 8216 7740 8720 8730 8210 S 92.39 EUR Free shipping - ESP C100 C110 C310 C315 C300 ESP 3.2 Hero 5.1/3.1 Tête d'impression S 34.79 EUR Free shipping - QY6-0055 Tête d'impression Printhead pour i9900 iP8500 9950 ip9100 PRO9000 S 79.19 EUR Free shipping - Tête d'impression Printhead pour PIXMA PRO9500 Mark II nozzle QY6-0077 S 141.59 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do not be En savoir plus Collaboration commerciale.
Voir le product
France (Toutes les villes)
- - - - - - - Store category Sign Up Now ! You may also like Used/broken Geeetech A10T 3D Printer 3in1 Out Mix-color Printing FDM 3D Printers Product Description You must know before buy: 1.Used/Broken 3D Printer 2. It ships from US warehouse 3. You must fully accept that this is a damaged machine before you buy 4. The cause of the damage is not clearly known 5. There is no warranty service for this product 6. There may be a few missing accessories A10T 3D Printer is an upgraded version of A10M, fast to assemble and keepting its consistent and stable printing accuracy. Its classic blue and black color combo and neat structure impart a touch of simplicity and excellence, which also embodies our commitment to quality products. The modularized design of A10T provides you with an easier assembly experience. A10T 3D Printer with its unique extruder design, proves to be a desktop workhorse for you to unleash unlimited imagination and enrich your 3D printing life! Mix-color printing, creative ideation! Color Mixer is a color mixing software developed by Geeetech. It can be used with the A10T to print three or more kinds of colors and make the prints more perfect. The main board of A10T is professionally coded to support auto-leveling function. All you need to do is connect the leveling sensor with your A10T. The whole operation process is effort-saving and would greatly enhance the adhesion of the first layer. Please note auto level do not come with printing. A10T have the filament detector, which will kills the pain caused by filament outage. It would alert you to change filament used up. This add-on would largely avoid bootless printing for enhancing your printing satisfaction. The break-resuming capacity, a resurrection system, is added to save real-time printing status and resume the printing job exactly at the same place where it has been stopped. Keeping Prusa I3 3D printers’ gantry structure and with its build volume as 220mm*220mm*250mm, A10T makes the best of the building platform and enables you to view the printing details in 360°. The V-shaped wheels and rails on each axis, made from wear-resistant aluminum profile, could, in a large measure, reduce the printing noise and offer you a quiet 3D printing environment. A10T extruder cover features 360° ventilation design, greatly enhancing the dissipation of heat and guaranteeing excellent printing quality. A10T extruder motor uses a gear train of 3:1 speed ratio, amplify input torque and improving your printing experience. Adopting the modularized design for extruder wiring, A10T makes it easy to exchange the wire. Plug-and-play, saving efforts and money. A10T come with a considerate b'"'resetb'"' button. One-press action, back to normal operation. Printing at the accuracy of 0.1mm, it delivers objects with smooth surface finish, clear angles and strong structure. Payment Delivery details Terms of sales About us Contact us Payment Payment must be received within 7 business days of auction closing, or a unpaid case will be opened. Delivery details 1. This items will be sent from Los Angeles, United States. 2. Please confirm you are putting a correct and complete shipping address here.You are resposible for extra charge if your package been returned because of wrong address. Terms of sales Please confirm you are putting a correct and complete shipping address here.You are resposible for extra charge if your package been returned because of wrong address. If packages return because of wrong address,you will have to bear extra cost of shipping. About us Getech Co.,Ltd(Geeetech) is an innovative, technology oriented enterprise that is specialized in the Rb'&'D, manufacturing and sales of 3D printer and the spare parts of 3D printer. Geeetech has been one of the most prominent rising star in the area of 3D printing since founded in 2011. Geeetech advocates making 3D printing easy and economical and we are hoping to help more enthusiasts get eas En savoir plus Collaboration commerciale.
Voir le product
France (Toutes les villes)
Vous Pouvez Aussi Aimer - QY6-0072 Tête d'impression Printhead pour iP4600 iP4680 iP4700 4760 MP630 S 45.59 EUR Free shipping - Tête d'impression pour WF7610 WF7620 WF7611 WF7111 WF7621 WF3641 WF7710 A 65.99 EUR Free shipping - Tête d'impression pour e pson XP600/XP601/XP950/XP820 FA09050 Full Colors S 260.39 EUR Free shipping - Tête d'impression pour iP8720 iP8750 iP8780 MG6310 MG7520 MG7180 QY6-0083 S 49.19 EUR Free shipping - QY6-0075 Tête d'impression pour MP770 MP790 PIXMA MP750 MP760 860I 865R QY6-0049 41.99 EUR Free shipping - QY6-0084 Tête d'impression Print Head pour PRO-100 PRO 100 QY6-0084-000 128.39 EUR Free shipping - ESP C100 C110 C310 C315 C300 ESP 3.2 Hero 5.1/3.1 Tête d'impression S 34.79 EUR Free shipping - Tête d'impression pour Epson WF-2630 L300 L301 XP315 XP415 ME401 ME303 WF-2520 59.99 EUR Free shipping SAFE b'&' SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories - Other - Voitures - Électronique grand public - Ordinateurs / tablettes et rés - Commerce et industrie - Maison et jardin - Articles de sport - Jouets et hobbies - Instruments de musique - Accessoires pour panneau de ba - Caméras et photos - Vêtements - Express Post'S Item 934 935 Tête d'impression pour HP Officejet Pro 6230 6830 6815 6812 6835 S Product Description After purchasing and receiving the goods, please pay attention to the following items: NOTE: The power must be cut off before the Epson print head is installed, otherwise it will cause the print head’s circuit board to be burned out. 1.When the print head is shipped, it will be coated with a protective liquid. When using it for the first time, wipe the print head before installing it. The protective liquid drops on the chip and where the ink bleeds. And use tissue to gently wipe the protective liquid on the chip (on the copper sheet). Don't use cleaning fluid or eraser. 2.During the regeneration process of the print head, the original ink will be cleaned and the protective liquid will be injected. If there is no protective liquid, printing will not be done when the pipeline is dry. If the print head can be detected, but color irregularity or blurry is observed, you can continue to add ink to print, print sheets to use up the protection liquid. And then the color can be used to print. 3. If the printing is not clear, press the cleaning button of the machine. And the print head can be cleaned when the ink cartridge is full of ink. If there is no ink to clean the print head, it is easy to be burn out. And you can print clearly after printing a few times. 4. Clean the print head directly on the machine instead using cleaning fluid. If you clean it with cleaning fluid and do not drop the protective fluid, the print head will be completely blocked and can not be used. 5. Don't use cleaning fluid or water to clean the print head, otherwise the print head will be completely blocked. When replacing the print head, please pay attention to the following items: 1.After receiving the print head, do not use a needle tube to inject water to check if the print head is blocked. It is a useless and dangerous practice. First of all, once the print head gets water and is not dry, and power on the machine, the main board will be burned out, and even the print head will be burned out. 2.The head surface of the print head is very fragile. It must not be touched, and needs to be protected. Its surface is an aluminum sheet, and inside is coated with a crystal oscillator and a very small ink tube. It will be deformed or even broken when touched, and the print head will be scrapped. 3.Be careful when installing the print head, be sure to cut off the power first, and install it in place. After installation, please push gently with your hands. Do not power on after installation, because if the head is not in place, the head will easily break when the machine moves. But your hands can feel, and it is easy to control. 4.When connecting the plug cable, do no En savoir plus Collaboration commerciale.
Voir le product
France (Toutes les villes)
Characteristics: Connectivity: 2.4 GHz wireless Wireless distance: 10M It comes with the Breathing 7 Colors Led Backlit. Built-in 400mAh rechargeable lithium battery (included) Charging time: 3-5 hours Key of life: 20 million clicks Optical resolution: 1800DPI DPI: 800DPI-1200DPI-1800DPI Ergonomic: support Silent buttons: left button and right button Buttons: 6 buttons with scroll wheel (Two side buttons, one DPI key) acceleration £ º20G Response Speed: 150IPS Travel speed: 80 inches / sec Size: 138mm * 80mm * 38mm Weight: 120g Most suitable for laptop user and PC user Optical technology works on most surfaces Smart connectivity. no code needed, plug & play Iron, comfortable, mobile and stable Compatible with Windows 10 Windows XP, Vista, Win 7, Win 8, ME, 2000 and Mac OS... or the latest Package Included: 1 x wireless gaming mouse 1 x nano receiver 1 x charging cable 1 x original retail box
25,70 €
Voir le product

Petites annonces gratuites - acheter et vendre en France | CLASF - copyright ©2025 fr.clasf.com.