Companion one dac audio

Audio Synthesis DSM Ultra-Analog D20400A DAC D/A converter.  En parfait état et avec Upgrade du receiver digital CS8414 One of the best converter ever  With the famous and amazing Ultra-Analog D20400 converter chip and external power suply In perfect state and Upgraded, this one have the CS8414 input digital chip  CS8414 is far better than original CS8412 i send the original CS8412 with the dac. It's easy to compare, the digital receiver chip is on removable slot (see picture) To be compared with STAX, COUNTERPOINT, MARK LEVINSON, DAX, MSB, LAVRY... International ers are welcome Please ask before for exact shipment fees Thank you

ONE FOR ALL SV1820 Récepteur Bluetooth HD pour systeme Stéréo   CD_ONESV1820 Description Récepteur Bluetooth HD pour systeme Stéréo depuis Smartphone, tablette ou PC - Jusqu'a 3 appareils connectés - Wolfson DAC sortie optique numérique pour un son tres net - Permet de lire de la musique provenant de vôtre appareil directement sur votre systeme stéréo - Câble de 3.5mm vers RCA - Câble audio 3,5mm vers 3,5mm - Dimensions du produit (cm) 2.2x9.4x6.2 - Portée 10m Livraison en France La livraison est systématiquement assurée par Transporteur ou Colissimo (La Poste) et l'envoi vous est offert. La réception se fait en général dans les 2/3 jours suivant le paiement de la commande. Forts de nos 15 années d'expérience, nos paquets sont solides et vos objets protégés au mieux. Livraison à l'international  Livraison en Europe assurée principalement par Transporteur. Les Retours Satisfait ou remboursé: Vous disposez d'un délai de 14 jours ouvrables pour nous retourner, sans indication de motif, le produit et être intégralement remboursé. Le produit devra être neuf dans son emballage d'origine et non déballé. Nous vérifierons que le produit n'a pas été utilisé. Les frais de port retour restent à la charge du client.  Pour toute information complémentaire, n'hésitez pas à vous référer à nos conditions générales de vente. Les Garanties Nos objets sont tous neufs et au minimum garantis  1 an. Ils bénéficient de la garantie constructeur. Les barrettes mémoires bénéficient souvent d'une garantie plus importante précisée éventuellement dans le descriptif. Le SAV Notre SAV n'a qu'un intérêt: vous satisfaire. Nous sommes votre allié pour vous aider dans le choix et l'envoi de votre article. Puisque pour nous tout ne s'arrête pas après la livraison nous assurons un suivi lors d'un problème technique. Biens transmis par voie numérique ou inclus sur des supports matériels Tous nos produits numériques sont des offres légales autorisées par la loi. Elles sont officielles, packagées et la revente est autorisée par les propriétaires de droit, éditeurs ou revendeurs agréés. Pour toute demande d'un propriétaire de droit, nous sommes à votre écoute pour vous donner toute information à ce sujet. Paiement Pour vous servir au mieux et dans les meilleurs délais, nous n'acceptons que les paiements immédiats effectués avec Paypal. Pour rappel Paypal vous permet de payer directement par carte bancaire sans compte paypal associé. Conditions générales de vente   Prix et disponibilité Les prix affichés sur le Site sont indiqués en euros toutes taxes françaises comprises (TVA française et autres taxes applicables). Les frais de port sont indiqués lorsqu'ils ne sont pas offerts. Nous pouvons accepter vos commandes dans la limite des stocks disponibles. Nous Vous informons de la disponibilité des articles vendus sur le Site sur la page d'information de chaque article. Si, en dépit de notre vigilance, les articles sont indisponibles, nous vous en informerons par e-mail dans les meilleurs délais et nous vous rembourserons dès que la transaction sera annulée. Malgré tous nos efforts, il se peut qu'un nombre restreint parmi les milliers d'articles figurant sur notre site comporte une erreur de prix. Soyez assuré cependant que nous procédons à la vérification des prix lors de la procédure d'envoi de votre article. Si le prix corrigé est inférieur au prix affiché sur le Site, nous vous appliquerons le prix le plus bas et vous adresserons votre article. Si le prix corrigé est supérieur au prix affiché sur le Site, nous vous en informerons et procéderons à l'annulation de votre commande à moins que vous ne choisissiez d'accepter la commande au nouveau prix.     Venez visiter votre boutique FreeShopping   où des milliers de produits vous attendent !

ONE FOR ALL SV1820 Récepteur Bluetooth HD pour systeme Stéréo Récepteur Bluetooth HD pour systeme Stéréo depuis Smartphone, tablette ou PC - Jusqu'a 3 appareils connectés - Wolfson DAC sortie optique numérique pour un son tres net - Permet de lire de la musique provenant de vôtre appareil directement sur votre systeme stéréo - Câble de 3.5mm vers RCA - Câble audio 3,5mm vers 3,5mm - Dimensions du produit (cm) 2.2x9.4x6.2 - Portée 10m Informations produit: Marque: ONEFORALL1 Système de haut-parleurs|Technologie de connectivité: Sans fil Durée de garantie du fabricant: 2 Type de garantie du fabricant: Pièces Garantie du fabricant: 2 ans, Pièces. durée de disponibilité des pièces détachées essentielles à l'utilisation du produit: Information non communiquée. Nous ne livrons que la France Métropolitaine ! Si vous habitez dans les DOMTOM, la Corse ou Monaco, merci de nous contacter par message.

Vends très bon DAC PS audio Digital Link III. Input signal (signal PCM signal jusqu'à 24 bit 192 kHz), Outputs 96 kHz ou 192 kHz 24 bit (au choix) Connectique très complète: 3 entrées numériques: SPDIF (coaxial), fibre optique, et USB (depuis un PC) Sorties XLR ou RCA La LED bleu de droite ne s'allume pas toujours. La façade présente quelques marques sur le bord. Aucun problème de fonctionnement. Très bonne qualité sonore: chaleureux, précis, dynamique. For sale this DAC PS audio in perfect working state. One of the blue LED on the left doesn't lights all the time.  Some marks on the aluminium front part. No musical issue.

Cambridge Audio Azur 640 C V2.0 CD Player/High End Audiophile, remote control Functional contributions of V2.0 vs V1  -      New toroidal transformer has been fitted, -      The analogue filtering has been redesigned, -      Dual converter : Wolfson WM8740 24bit / 192kHz, ie. one DAC per channel. Optical and coaxial digital outputs, CD-R / RW compatible, Dimensions (W x H x D): 430 x 70 x 310 mm - Weight: 4.6 kg, Condition: used device in good aesthetic condition and perfect functional condition, Supplied with: remote control, power cord and instructions for use.

DAC 3 A very innovative USB DAC blending modern tech with renowned TDA1543 true multibit Philips ® chip for that pure vintage "analog" listening experience... And with its very innovative on-board, always active, jitter-killing reclocker, it will sound equally good from all your sources: USB or SPDIF (coaxial and optical). Problematic, highly jittery sources, like set-top boxes, or wireless audio transmitters (airplay and the like) will now sound just like any well-designed high end transport. And yes, USB too !!! It fits in the palm of your hand, and can be battery operated, so you can take it with you and have your friends enjoy it too ! TDA1543 + Reclocker x (USB or DIR9001) + Battery power = GREAT SOUND ! Why did you design this DAC ? Nobody can be "told" what a good DAC is, you have to hear it for yourself... After searching myself for the "perfect" DAC, I stumbled on forum discussions about how these "vintage" DACs from Phillips® sounded so good. I was getting a little skeptical about those "natural" and "analog" statements for the sound of those converters, but as so many people seemed to make converging descriptions, I was left with the feeling it was not just a legend... I decided I had to build one, and try for myself ! As the result was more than surprising... I told myself: wow, I got to show that to my friends... And what most of my friends said: "can you build one for me ?" Call that a market study... Why do audiophiles do not like the sound of current oversampling DACs ? Oversampling DACs are textbook correct, right ? So they should sound perfect, no ? Well... While it is true that oversampling DACs are textbook correct, if you make the wrong assumptions about the human hearing system, you may end up making mistakes, even if you do the math right ! Let me give you a simple example: it is generally assumed we hear the spectrum of sounds, but can't hear the phase. Now try "binaural beats" on Google and listen for yourself. These clearly show the phase information IS sensed, AND remains present far inside the brain. So maybe the spectrum-only approach to DAC design is not telling the whole story... Traditional non-oversampling DACs from the past did not make any assumptions about hearing mechanisms, they just tried to replicate in analog what you fed them digitally as closely as possible... What are the main features of this DAC ? And what are the main goals of its design ? Extract the pure performance of the last built non-oversampling true 16-bit TDA1543 DAC from Philips® Provide equally high sound quality on either USB or SPDIF sources thanks to a very innovative reclocker USB, Optical & Coaxial inputs (a simple press on the button switches them in round-robin fashion) NO DRIVER Install necessary: uses the stock drivers of your OS: Linux, MacOS, and yes, Windows too (all flavors, XP, Win7/8...) just plug on USB and it's your default sound output ! Frequency indicator (works the same on all inputs) always tells you the REAL sample rate of your source (your computer/transport can't lie to you) DIR9001 96 kHz SPDIF Receiver Supports sampling frequencies from 28kHz to 108kHz (continuous range, including non-standard frequencies) TDA1543 16-bit DAC - the original from Philips® Passive I/V conversion No Op-Amp - direct output with 2Vpp (will drive any power amp well) Huuuge capacitors on the output path provides sub-Hertz cutoff frequency (Three Stage power supply regulation (for a super low background noise level) Separate voltage regulator for the DAC and the Digital SPDIF receiver (same reason as above) Battery-powered with dual 9V NiMH batteries Smart battery charger on-board (quickly charges the batteries when depleted, keeps them charged at low current when idle) Will Directly drive any power amplifier or preamp Easy to carry around and make it listen to yours friends 2+ hours of listening on the batteries, if used standalone with spdif source How can such a small device sound so good ? Simple is beautiful... The less you process sound, by adding unnecessary stages, the more transparent result you get. A minimalist non-oversampling DAC will achieve that goal, and by being transparent, will give you great musical pleasure, and deep connection to musical emotions... What are owners of your DACs saying ? The first person to receive my DAC 3 was one of the Indiegogo crowdfunders, here is what he says about it (personnal email, reproduced with permission): "I've been using my DAC3 and am very pleased with it's sonic performance. The DAC3 digs deep into recordings and uncovers subtle musical details that I've missed using other DAC's. It also sounds very analogue and not at all harsh." Kind regards, Andrew Smith."     These are evaluations of my DAC 3...        Includes: 1x DAC 3 2x NiMH Batteries inside Note: power supply is not included, as it's designed to power from USB external power adapters are supported too, any 12V-24V (15V 1A recommended) wall transformer will do, laptop supplies are ok too, car power also... Video with detailed explanations on the design of this DAC: More details at: http://audio.starting-point-systems.com/   WARNING: If like me, you have the habit of cranking up the volume knob of your amp just to check if the device connected to it has its power on... don't do it with that DAC ! It's background noise is so low (no kidding) it just will fool you into thinking it's maybe not connected. Pressing the "play" key on your CD transport or favorite PC software will blow your speakers, kill your ears, piss-off your neighbors... How do I know... Well, it happened to me... Return Policy: If you don't fall in love with this DAC after listening to 2 or 3 or your favorite tracks with it, I'll refund your purchase without discussion.

DAC 3 A very innovative USB DAC blending modern tech with renowned TDA1543 true multibit Philips ® chip for that pure vintage "analog" listening experience... And with its very innovative on-board, always active, jitter-killing reclocker, it will sound equally good from all your sources: USB or SPDIF (coaxial and optical). Problematic, highly jittery sources, like set-top boxes, or wireless audio transmitters (airplay and the like) will now sound just like any well-designed high end transport. And yes, USB too !!! It fits in the palm of your hand, and can be battery operated, so you can take it with you and have your friends enjoy it too ! TDA1543 + Reclocker x (USB or DIR9001) + Battery power = GREAT SOUND ! Why did you design this DAC ? Nobody can be "told" what a good DAC is, you have to hear it for yourself... After searching myself for the "perfect" DAC, I stumbled on forum discussions about how these "vintage" DACs from Phillips® sounded so good. I was getting a little skeptical about those "natural" and "analog" statements for the sound of those converters, but as so many people seemed to make converging descriptions, I was left with the feeling it was not just a legend... I decided I had to build one, and try for myself ! As the result was more than surprising... I told myself: wow, I got to show that to my friends... And what most of my friends said: "can you build one for me ?" Call that a market study... Why do audiophiles do not like the sound of current oversampling DACs ? Oversampling DACs are textbook correct, right ? So they should sound perfect, no ? Well... While it is true that oversampling DACs are textbook correct, if you make the wrong assumptions about the human hearing system, you may end up making mistakes, even if you do the math right ! Let me give you a simple example: it is generally assumed we hear the spectrum of sounds, but can't hear the phase. Now try "binaural beats" on Google and listen for yourself. These clearly show the phase information IS sensed, AND remains present far inside the brain. So maybe the spectrum-only approach to DAC design is not telling the whole story... Traditional non-oversampling DACs from the past did not make any assumptions about hearing mechanisms, they just tried to replicate in analog what you fed them digitally as closely as possible... What are the main features of this DAC ? And what are the main goals of its design ? Extract the pure performance of the last built non-oversampling true 16-bit TDA1543 DAC from Philips® Provide equally high sound quality on either USB or SPDIF sources thanks to a very innovative reclocker USB, Optical & Coaxial inputs (a simple press on the button switches them in round-robin fashion) NO DRIVER Install necessary: uses the stock drivers of your OS: Linux, MacOS, and yes, Windows too (all flavors, XP, Win7/8...) just plug on USB and it's your default sound output ! Frequency indicator (works the same on all inputs) always tells you the REAL sample rate of your source (your computer/transport can't lie to you) DIR9001 96 kHz SPDIF Receiver Supports sampling frequencies from 28kHz to 108kHz (continuous range, including non-standard frequencies) TDA1543 16-bit DAC - the original from Philips® Passive I/V conversion No Op-Amp - direct output with 2Vpp (will drive any power amp well) Huuuge capacitors on the output path provides sub-Hertz cutoff frequency (Three Stage power supply regulation (for a super low background noise level) Separate voltage regulator for the DAC and the Digital SPDIF receiver (same reason as above) Battery-powered with dual 9V NiMH batteries Smart battery charger on-board (quickly charges the batteries when depleted, keeps them charged at low current when idle) Will Directly drive any power amplifier or preamp Easy to carry around and make it listen to yours friends 2+ hours of listening on the batteries, if used standalone with spdif source How can such a small device sound so good ? Simple is beautiful... Simple is beautiful... The less you process sound, by adding unnecessary stages, the more transparent result you get. A minimalist non-oversampling DAC will achieve that goal, and by being transparent, will give you great musical pleasure, and deep connection to musical emotions... What are owners of your DACs saying ? The first person to receive my DAC 3 was one of the Indiegogo crowdfunders, here is what he says about it (personnal email, reproduced with permission): "I've been using my DAC3 and am very pleased with it's sonic performance. The DAC3 digs deep into recordings and uncovers subtle musical details that I've missed using other DAC's. It also sounds very analogue and not at all harsh." Kind regards, Andrew Smith."     These are evaluations of my DAC 3...   Includes: 1x DAC 3 2x NiMH Batteries inside Note: power supply is not included, as it's designed to power from USB external power adapters are supported too, any 12V-24V (15V 1A recommended) wall transformer will do, laptop supplies are ok too, car power also... Video with detailed explanations on the design of this DAC: USB Audio DAC with jitter killer reclocker crowdfunding pitch - YouTube Video will open in a new window [isdntekvideo]   WARNING: If like me, you have the habit of cranking up the volume knob of your amp just to check if the device connected to it has its power on... don't do it with that DAC ! It's background noise is so low (no kidding) it just will fool you into thinking it's maybe not connected. Pressing the "play" key on your CD transport or favorite PC software will blow your speakers, kill your ears, piss-off your neighbors... How do I know... Well, it happened to me... Return Policy: If you don't fall in love with this DAC after listening to 2 or 3 or your favorite tracks with it, I'll refund your purchase without discussion.

DAC 100 SE Atoll USB 24 bits/192 kHz PCM 1796. Audiophile design, Made in France. The construction of the case is solid, the connections and switches/selectors are of quality. The experience with this device is summed up in precision, naturalness and striking sound realism (and yet my sources are already references). If you want to move from your listening room to the concert hall: this is the device you need. And in more detail:. a beauty of timbres with perfect neutrality. a broad sound image, with depth, we position the musicians very well in space. well-defined treble up to the extreme treble. deep, accurate bass, without superfluous roundness. breathtaking dynamism These qualities will particularly make the difference on classical music and jazz. To be combined with good quality connection cables to get all the benefits. In excellent working and aesthetical condition, comes with power cord and original box, extremely well packaged. Would consider posting it internationally but please, ask for a quote as the postage differs from country to country and the amount in the description is for European Union only, thanks. The Atoll DAC 100 SE DAC is a digital/analog converter with three coaxial inputs, three optical inputs and one USB input. Coaxial and optical inputs support resolutions up to 24-bit/192kHz. For the USB input, it accepts resolutions up to 24 bit/96 kHz. For connection to an integrated amplifier, a stereo RCA output is located on the left of the rear panel. On the front a series of LEDs indicates the input used. This front is in brushed anodized aluminum, either natural or black. The converters are Burr Brown PCM 1796. Two power supplies, one of which is reserved exclusively for the analog audio part, equip this DAC. The output stages are provided by discrete components without feedback. The brand Atoll has designed a very well-built DAC. The DAC 100 SE occupies a relatively small space while still being able to enhance up to seven digital sources. Digital inputs: 3 x optical, 3 x coaxial and 1x USB Analog outputs: 1 x stereo RCA USB: Type B Resolutions and sampling rates: optical and coaxial: 16-24 bits (44.1 kHz, 48 kHz, 96 kHz and 192 kHz) USB: 24-bit (32kHz, 44.1 kHz, 48 kHz, 96 kHz) Dual power supply Converters: Burr Brown PCM 1796 Output stages with discrete components and no feedback Dimensions: 320 x 210 x 60 mm Weight: 2kg Arcam / quad / cambridge audio / teac / marantz / denon / yamaha / onkyo / atoll / nad / musical fidelity / gustard / ifi / monitor audio / klipsch / ifi / AudioQuest / Astell b'&' Kern / iBasso / Hidizs / Fiio / Shanling / Cayin / beyerdynamic / meze / hifiman / audio technica / akg / bel canto / violectric / lehmann / parasound / benchmark / auralic / burson / aune / feliks / vincent / little dot / prima luna / pathos / willsenton / reisong / woo / fezz / pier audio / jadis, sony, eversolo, wiim, topping, aune, gustard, smsl, volumio, matrix En savoir plus

I'm selling this MATRIX X-SABRE PRO MQA DAC, one of the best sounding dacs I have ever owned, and i have owned quite a few in my lifetime !  It is in perfect condition, just as new (i take very good care of my audio gear), and comes with a usb cable and a power cord. It also comes with a remote control. I'm selling it with regret, but i am going to upgrade for a much more expensive dac/streamer. I hope the one i get will sound as good as the Matrix !  It is one of the best rated dacs by the audio science review ! (See article below) It can read any audio files, including mqa from a lot of sources (streamers) with a musicality that will put chivers to your spine ! You can ear each instrument very clearly and with a lot of detail but no harshness. It retails at 2200 euros, i'm selling it at 1400. It's a bargain for music lovers ! Cheers ! Service de livraison : Colissimo The Matrix gets a lot of positive reviews in the audiophile community. Just check it out: https://www.audiosciencereview.com/forum/index.php?threads/matrix-audio-x-sabre-pro-mqa-best-audio-dac-in-the-world.8729/ Steve Guttenberg's video review: https://www.youtube.com/watch?v=IUZCGOoxLSU Unboxing video: https://www.youtube.com/watch?v=4qIvDWqPN9o The Matrix Audio X-Sabre Pro MQA is beautifully made, putting to shame many products in its price range. It oozes class and quality. That beauty runs deep when it comes to performance as Matrix Audio X-Sabre Pro MQA unseats its own brother to take the crown of the best DAC I have ever measured. Considering that the list now includes nearly 160 DACs, this is an incredible achievement. I met the team behind Matrix Audio at the last audio show and you have not seen a more soft-spoken, unassuming team of engineers than them. None of the ego that is so prevalent in high-end audio. The company is active here and on some other forums. And of course volunteers to have its products tested by us, rather than hiding in the bushes. So they score high on both product and customer service. Needless to say, it is my absolute pleasure to recommend the Matrix Audio X-Sabre Pro MQA. We are here to find the best engineered audio products and the Matrix Audio Proves that it is among a handful of companies to produce such trophy class products one after the other. It put a huge smile on my face after testing it, one that will be hard to erase! Description Matrix Audio, in partnership with MQA Ltd., has created the MQA-supported X-SABRE Pro audio DAC to let you experience the abundant music details in the artists' recording room. X-SABRE Pro is an MQA-enabled DAC which can fully decode the original MQA files without any assistance from third party software (MQA Core Decode). Powerful Hardware Platform X-SABRE PRO (MQA) used the ES9038PRO advanced 8-channel D/A chip, and its inner DSP unit and analog circuit have the high performance and better user experience. The new generation XMOS XU216 USB asynchronous transfer interface and new AK4118 S/PDIF receiver chip, with powerful computing performance and multi-channel processing performance, make X-SABRE Pro (MQA) has excellent digital audio conversion capability. IIS Port X-SABRE Pro (MQA) is equipped with the most complete input ports of this series, in addition to optical, coaxial, AES/EBU, USB ports, we even added a IIS·LVDS input via a HDMI connector to differential transmit IIS signal, maximize the transmission performance of the IIS port, to make the data from the short-distance transmission between the chips into high-speed interconnection between the devices, get rid of the USB transmission or S/PDIF transmission re-encoding, and let the original digital audio stream directly into the D/A chip. More Sampling Rate Supported X-SABRE PRO(MQA) can support the Master Quality Authenticated coding technology developed by UK MQA Limited which can decode the MQA audio s

For sale Oppo HA-1 DAC & headphone amplifier. The amplifier has been very well taken care of (still has the original screen protection film) and is in very good condition (minor imperfection in the upper right corner next to potentiometer - hardly visible, check pics). Exquisite build and fantastic quality. Included:  - Oppo HA-1 DAC & headphone amplifier  - Remote control  - Power cord (EU)  - USB cable  - SPDIF coaxial cable The item will be carefully packed and sent via tracked and insured shipping. HIGH PERFORMANCE AUDIO - Discrete Class A Amplifier A Class A amplifier conducts signal over the entire range of the input signal cycle. The output transistors are biased to operate in their most linear range, and there is no crossover distortion caused by switching the signal between two push-pull devices. The HA-1's power amplification circuit for the headphones is Class A built with discrete transistors. The discrete design allows us to hand-pick and match the best parts to build the HA-1. - Toroidal Power Supply A toroidal power transformer offers superior power efficiency and much lower exterior magnetic fields over traditional laminated steel core transformers. The HA-1's toroidal linear power supply provides a very clean and robust power source to the audio components. - Fully Balanced Design The internal analog audio signal path of the HA-1 is fully balanced. For digital audio, the signal runs in balanced mode all the way from the DAC to the output jacks. Balanced analog input is kept intact, and single-ended input is converted to balanced at the input buffer. All single-ended outputs are derived from the balanced signal as well. The balanced design provides better common-mode noise rejection and improves signal quality. The balanced headphone output provides twice the voltage and four times the power of the single-ended output, enabling the HA-1 to drive the most power hungry headphones. It also provides better channel seperation by eliminating the common ground return path. - ESS Sabre32 Reference DAC The DAC is one of the most important components for digital audio playback. The SABRE32 Reference ES9018 from ESS Technology is the world’s best performing 32-bit audio DAC solution targeted for high-end consumer applications and professional studio equipment. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented DNR (Dynamic Range) of up to 135dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, the industry’s highest performance level that will satisfy even the most demanding audio enthusiast. To learn more about the technologies behind the exceptional performance of the SABRE DAC, please read the SABRE Technical White Paper. OPPO HA-1 4.3" information display - Clean Signal Path The HA-1 uses an analog potentiometer (the familar volume knob) to control the volume. By avoiding re-digitizing the audio signal for volume adjustment, the HA-1 provides a clean signal path for the audio. At the same time, the convenience of modern digital volume control is not lost - a remote-controlled motor turns the volume knob and a 10-bit analog-to-digital converter samples the signal to display a numeric dB level. - Made for iPod®, iPhone® and iPad® The HA-1 passes Apple's "MFi" certification and is compatibile with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance SABRE32 Reference DAC, music from your favorite portable device will sound its best. - Wireless Audio via Bluetooth The HA-1 supports Bluetooth Advanced Audio Distribution Profile (A2DP) with both the standard and aptX® high quality codec. Simply pair your phone with the HA-1 and set music free

Olive one - 1To appareil tout en 1: ampli, Dac, lecteur Etat impeccable, aucune rayure La qualité des composant a été la ligne directrice pour ce produit destiné aux audiophiles Amplification Puissance 2 x 32 W (8 ohms) Amplification numérique à haut rendement (92%) 1 amplificateur par canal pour une parfaite séparation des canaux DSP avec technologie PRISM Convertisseur numérique analogique (DAC) Burr-Brown PCM5142 32 bits / 384 kHz Plage dynamique / SNR: 112 dB Distorsion harmonique THD+N: - 93 dB @ - 1 dBFS Suréchantillonnage: 8X Interface utilisateur Écran LCD tactile capacitif en verre, diagonale 7" (17,78 cm) Interface affichable sur un téléviseur compatible via la connexion Miracast WiFi Application de contrôle gratuite iOS (iPhone, iPad) et Android WiFi (802.11a/b/g/n) Compatible WiFi Protected Setup (WPS) Certifié DLNA Lecture audio depuis Mac, PC, NAS (UPnP) Compatible multiroom (nécessite une Olive One pour chaque pièce) Bluetooth/Wi-Fi Direct™ Streaming audio direct depuis un périphérique portable (ordinateur portable, smartphone, tablette) Compatible casque et enceintes sans fil Bluetooth ou WiFi Direct Services audio compatibles Compatible avec tous les services de musique en ligne proposant une application iOS ou Android comme Pandora, Spotify, Deezer, etc. Tuner webradio intégré avec classement par genre, pays, etc. Connectique WiFi certifié Miracast Wi-Fi Direct DLNA/UPnP Bluetooth (A2DP) Connecteur antenne WiFi Port Ethernet Sortie audio stéréo mini-jack Sortie audio numérique coaxiale Sortie audio USB (pour DAC externe) Sorties enceintes plaquées or 24K Stockage Disque dur de 1To installé Capacité prise en charge: de 500 Go à 2,5 To Environnement Conforme aux directives RoHS Recyclable (aluminium et verre) Alimentation Consommation en veille: 0,5 W Généralités Dimensions (diamètre x hauteur max.): 229 x 41 mm Poids (sans disque dur): 2,7 kg Coffret en aluminium

Olive one - 1To appareil tout en 1: ampli, Dac, lecteur Etat impeccable, aucune rayure La qualité des composant a été la ligne directrice pour ce produit destiné aux audiophiles Amplification Puissance 2 x 32 W (8 ohms) Amplification numérique à haut rendement (92%) 1 amplificateur par canal pour une parfaite séparation des canaux DSP avec technologie PRISM Convertisseur numérique analogique (DAC) Burr-Brown PCM5142 32 bits / 384 kHz Plage dynamique / SNR: 112 dB Distorsion harmonique THD+N: - 93 dB @ - 1 dBFS Suréchantillonnage: 8X Interface utilisateur Écran LCD tactile capacitif en verre, diagonale 7b'"' (17,78 cm) Interface affichable sur un téléviseur compatible via la connexion Miracast WiFi Application de contrôle gratuite iOS (iPhone, iPad) et Android WiFi (802.11a/b/g/n) Compatible WiFi Protected Setup (WPS) Certifié DLNA Lecture audio depuis Mac, PC, NAS (UPnP) Compatible multiroom (nécessite une Olive One pour chaque pièce) Bluetooth/Wi-Fi Direct™ Streaming audio direct depuis un périphérique portable (ordinateur portable, smartphone, tablette) Compatible casque et enceintes sans fil Bluetooth ou WiFi Direct Services audio compatibles Compatible avec tous les services de musique en ligne proposant une application iOS ou Android comme Pandora, Spotify, Deezer, etc. Tuner webradio intégré avec classement par genre, pays, etc. Connectique WiFi certifié Miracast Wi-Fi Direct DLNA/UPnP Bluetooth (A2DP) Connecteur antenne WiFi Port Ethernet Sortie audio stéréo mini-jack Sortie audio numérique coaxiale Sortie audio USB (pour DAC externe) Sorties enceintes plaquées or 24K Stockage Disque dur de 1To installé Capacité prise en charge: de 500 Go à 2,5 To Environnement Conforme aux directives RoHS Recyclable (aluminium et verre) Alimentation Consommation en veille: 0,5 W Généralités Dimensions (diamètre x hauteur max.): 229 x 41 mm Poids (sans disque dur): 2,7 kg Coffret en aluminium En savoir plus

For sale Cambridge Audio DacMagic Upsampling DAC, well taken care of and in very good condition (normal signs of use). Key features: • Singled ended phono and XLR balanced audio outputs • Twin Wolfson WM8740 DAC chips • 32 bit Texas Instruments Digital Signal Processor (DSP) • Adapted Time Filtering (ATF™) asynchronous upsampling technology converts 16-24 bit audio (at any standard sampling frequency between 32-96kHz) to 24 bit/192kHz • One USB input and two SPDIF digital inputs (each providing an option of either optical or coaxial) • One SPDIF digital output (optical or coaxial) • Dual Differential Virtual Earth balanced filter topology – low order two pole linear-phased Bessel filter takes advantage of high sampling rate achieved • Choice of filters – linear phase, minimum phase and steep filter can all be selected to suit an individual's listening preferences • Phase select (to invert or reinvert input) Included: • DAC • 220V to 12V AC power supply (EU plug) Item will be carefully packed and tracking number will be provided.

Baladeur Hi-Res Audio FiiO M9 gris, sorties (a)symétrique, en bon état. Il est équipé d’un double DAC. Il prend en charge les fichiers PCM jusqu’à 24 bits/192 kHz et les fichiers DSD (64/128). Il est doté de deux sorties casque: une symétrique (mini-jack 2,5 mm) et une asymétrique (mini-jack 3,5 mm). La coque de protection d'origine a jaunie avec le temps (pas très visible sur la 4ème photo). Attention: Le baladeur tourne sous Android, mais il n'est pas équipé du Google Play Store. Il est possible d'installer des applications, mais il faut le faire manuellement. Des informations à ce sujet sont disponibles sur le site du fabricant. DAC: double Asahi Kasei AK4490 Ecran: tactile 3.2b'"' 480x800 (16:10) Stockage: port micro-SD (jusqu'à 2 To) OS: Android ----------------------------------------------------- FiiO M9 gray Hi-Res Audio walkman, (un)balanced outputs, in good condition. It is equipped with a dual DAC. It supports PCM files up to 24-bit/192kHz and DSD (64/128) files. It has two headphone outputs: one balanced (2.5 mm mini-jack) and one unbalanced (3.5 mm mini-jack). The original protective shell has yellowed over time (not very visible in the 4th photo). Please note: The player runs Android, but it is not equipped with the Google Play Store. It is possible to install applications, but you have to do it manually. Information about this is available on the manufacturer's website. DAC: dual Asahi Kasei AK4490 Screen: 3.2b'"' touchscreen 480x800 (16:10) Storage: micro-SD port (up to 2 TB) OS: Android En savoir plus

    iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:     Item Description Remarks Inputs/Outputs     Inputs (rear) USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in) Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible)   Intelligent SPDIF® Coaxial 3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM   SPDIF Optical         Outputs (rear) Audio RCA L+R     Intelligent SPDIF® Coaxial Up to 192kHz PCM       Output (right side) SmartPower® Socket Fast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A             Controls     Controls (front)     - HP Output Audio 6.3mm Headphone Jack   - Volume with Power On/Off switch Precision analogue volume control - 3.5mm Input   Auto disable the digital section when this is in use - X-Bass® On/Off   - 3D Holographic Sound® On/Off Auto-switching for Speakers® and Headphones® (two separate and distinct circuits)       Controls (left side)     - Power Mode Turbo, Normal, Eco Computer controlled power and gain scaling - Polarity Normal/Inverted   - Filter 3 positions, 6 filters (see filter section below)       Controls (bottom)     - Line Direct/Preamplifier Preamplifier function Enable/Disable, 0/9dB gain selectable Fixed 2V or variable with up to 5V available - iEMatch® Perfect-matching circuit for IEMs (eliminate hiss) Off / High Sensitivity Headphone / Ultra Sensitivity Headphone             DAC section     DAC Dual-core DSD, DXD, PCM DAC by Burr Brown 2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR   Bit-Perfect DSD processing, Bit-Perfect PCM processing         Clock Ultra low jitter GMT computer controlled Femto Clock RMS jitter 12kHz – 1MHz       Audio Formats DSD 512/256/128/64 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 All native decoding, no internal hardware conversion   DXD 2x/1x 768/705.6/384/352.8kHz All native decoding, no internal hardware conversion   PCM 768/705.6/384/352.8/192/176.4/96/88.2/ 48/44.1kHz All native decoding, no internal hardware conversion       Filters     - PCM Bit-Perfect Processing/Minimum Phase/Standard Digital filters selectable - DSD Extreme/Extended/Standard Range Analogue filters selectable - DXD Bit-Perfect Processing Fixed analogue filter             Specifications (DAC Section)     Dynamic Range (Line) >117db(A)   THD & N (0dBFS Line)   Output Voltage (Line) >2V   Output Impedance (Zout)   Jitter (correlated) Below AP2 test set limit               Headphone Power Output     HP Amp Output Power (max) Power (continuous.) - Turbo mode 10.0V/4,000 mW @ 16 Ohm >1560 mW @ 64 Ohm - Normal mode 5.5V/1,900 mW @ 16 Ohm >950 mW @ 32 Ohm - Eco mode 2.0V/500 mW @ 8 Ohm >250 mW @ 16 Ohm             Specifications (Headamp Section)     Dynamic Range (HP) >115dB(A) (Eco Mode, 2V Out)   THD &N (HP 500mW/16R)   Output Voltage (HP) >8V (Turbo Mode)   Output Impedance (Zout)   Maximum Output Power 4,000mW @ 16 Ohm Load when using sinewave testing the iDSD micro may engage protection circuits Continuous Output Power 1,000mW @ 64 Ohm Load