Controls for volume and

for Shure se215/se425/se535 MMCX Audio Headset Cable Cord w/Mic Volume Cont ZH Features: PVC Material with 18 cores and oxygen-free copper(OFC) wire and 250D nylon, Cord Length: 120cm. High-purity gold-plated copper, so the sound of firmness and flexibility,better extension of High frequencies. 3.5mm Earphone Headphone Audio Upgrade Cable Wire with Micphone and Volume Control. (Volume Control does not  compatible with iphone 7 8 X) High-precision MMCX pluggable & subsided design: can block the rotary wire loss. Fit for Shure se215/se425/se535/se846/ue900 and most MMCX socket headphones. Used in Division 18 of the core wire processing, soft, no tie, the main line is 2.5mm, sub-line is 1.7mm, tensile strong, durable. Wheat single button,compatible with Apple and Android. Besides Just connect one end of the earphone unit interface 2.5mm. Material: Outsourcing rubber high permeability transparent PVC, black PVC plastic bag inside the core oxygen-free copper wire core 18 * 0.05 + 250D nylon flexural tensile wire, shielded wire core, no auscultation effect. Specifications: main line diameter: 2.5MM distribution line diameter: 1.8MM Net wieght：15g material: purity 4NOFC oxygen free copper OCC single crystal copper wire Color: Black Notes: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Packing: cable*1 Le 06-févr.-20 à 21:49:11 Paris, le vendeur a ajouté les informations suivantes:

Features: PVC Material with 18 cores and oxygen-free copper(OFC) wire and 250D nylon, Cord Length: 120cm. High-purity gold-plated copper, so the sound of firmness and flexibility,better extension of High frequencies. 3.5mm Earphone Headphone Audio Upgrade Cable Wire with Micphone and Volume Control. (Volume Control does not  compatible with iphone 7 8 X) High-precision MMCX pluggable & subsided design: can block the rotary wire loss. Fit for Shure se215/se425/se535/se846/ue900 and most MMCX socket headphones. Used in Division 18 of the core wire processing, soft, no tie, the main line is 2.5mm, sub-line is 1.7mm, tensile strong, durable. Wheat single button,compatible with Apple and Android. Besides Just connect one end of the earphone unit interface 2.5mm. Material: Outsourcing rubber high permeability transparent PVC, black PVC plastic bag inside the core oxygen-free copper wire core 18 * 0.05 + 250D nylon flexural tensile wire, shielded wire core, no auscultation effect. Specifications: main line diameter: 2.5MM distribution line diameter: 1.8MM Net wieght：15g material: purity 4NOFC oxygen free copper OCC single crystal copper wire Color: Black Notes: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Packing: cable*1       Le 22-juil.-19 à 11:32:12 Paris, le vendeur a ajouté les informations suivantes:

    iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:     Item Description Remarks Inputs/Outputs     Inputs (rear) USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in) Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible)   Intelligent SPDIF® Coaxial 3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM   SPDIF Optical         Outputs (rear) Audio RCA L+R     Intelligent SPDIF® Coaxial Up to 192kHz PCM       Output (right side) SmartPower® Socket Fast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A             Controls     Controls (front)     - HP Output Audio 6.3mm Headphone Jack   - Volume with Power On/Off switch Precision analogue volume control - 3.5mm Input   Auto disable the digital section when this is in use - X-Bass® On/Off   - 3D Holographic Sound® On/Off Auto-switching for Speakers® and Headphones® (two separate and distinct circuits)       Controls (left side)     - Power Mode Turbo, Normal, Eco Computer controlled power and gain scaling - Polarity Normal/Inverted   - Filter 3 positions, 6 filters (see filter section below)       Controls (bottom)     - Line Direct/Preamplifier Preamplifier function Enable/Disable, 0/9dB gain selectable Fixed 2V or variable with up to 5V available - iEMatch® Perfect-matching circuit for IEMs (eliminate hiss) Off / High Sensitivity Headphone / Ultra Sensitivity Headphone             DAC section     DAC Dual-core DSD, DXD, PCM DAC by Burr Brown 2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR   Bit-Perfect DSD processing, Bit-Perfect PCM processing         Clock Ultra low jitter GMT computer controlled Femto Clock RMS jitter 12kHz – 1MHz       Audio Formats DSD 512/256/128/64 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 All native decoding, no internal hardware conversion   DXD 2x/1x 768/705.6/384/352.8kHz All native decoding, no internal hardware conversion   PCM 768/705.6/384/352.8/192/176.4/96/88.2/ 48/44.1kHz All native decoding, no internal hardware conversion       Filters     - PCM Bit-Perfect Processing/Minimum Phase/Standard Digital filters selectable - DSD Extreme/Extended/Standard Range Analogue filters selectable - DXD Bit-Perfect Processing Fixed analogue filter             Specifications (DAC Section)     Dynamic Range (Line) >117db(A)   THD & N (0dBFS Line)   Output Voltage (Line) >2V   Output Impedance (Zout)   Jitter (correlated) Below AP2 test set limit               Headphone Power Output     HP Amp Output Power (max) Power (continuous.) - Turbo mode 10.0V/4,000 mW @ 16 Ohm >1560 mW @ 64 Ohm - Normal mode 5.5V/1,900 mW @ 16 Ohm >950 mW @ 32 Ohm - Eco mode 2.0V/500 mW @ 8 Ohm >250 mW @ 16 Ohm             Specifications (Headamp Section)     Dynamic Range (HP) >115dB(A) (Eco Mode, 2V Out)   THD &N (HP 500mW/16R)   Output Voltage (HP) >8V (Turbo Mode)   Output Impedance (Zout)   Maximum Output Power 4,000mW @ 16 Ohm Load when using sinewave testing the iDSD micro may engage protection circuits Continuous Output Power 1,000mW @ 64 Ohm Load  

iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:   Item Description Remarks Inputs/Outputs   Inputs (rear)USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in)Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible) Intelligent SPDIF® Coaxial3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM SPDIF Optical    Outputs (rear)Audio RCA L+R  Intelligent SPDIF® CoaxialUp to 192kHz PCM   Output (right side)SmartPower® SocketFast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A       Controls   Controls (front)  - HP OutputAudio 6.3mm Headphone Jack - Volume with Power On/Off switchPrecision analogue volume control DAC section   DACDual-core DSD, DXD, PCM DAC by Burr Brown2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR Bit-Perfect DSD processing, Bit-Pe

Bomaster 1900 Youtube demo link: https://www.youtube.com/watch?v=sGseuFLROKU Manufactured: 1976 - 1982 Designer: Jacob Jensen Colours: Rosewood, Teak, White, Oak The 1970's were exciting times for Bang & Olufsen. Another breakthrough during this decade was Beomaster 1900, a radio receiver and amplifier launched in 1976. Once again, design and operation differed dramatically from other contemporary products. Originally designed by Jacob Jensen, Beomaster 1900, together with Beomaster 2400-2 were two advanced FM stereo receivers. They had identical technical specification and performance. Both were easy to use and easy to live with. Beomaster 2400-2 had the additional convenience of a cordless ultrasonic remote control module by which you could operate radio, amplifier and Beogram 2400 or 4004 record deck from a distance. Both receivers had touch-sensitive controls for operating the features and functions you used every day. All the secondary switches and adjustments were protected beneath a hinged lid, but an illuminated readout panel showed you the set's operational status at a glance. Beomaster 1900 boasted a powerful 2 x 30 watts RMS amplifier with distortion of less than 0,13%, five pre-set FM stations and comprehensive connection facilities. To operate it you simply touch the application "dimples" on the set's front panel. The radio section had 4 pre-set stations which could be summoned at a touch and the phase-lock loop decoder provided excellent stereo separation even in difficult reception conditions The volume level could be pre-set at low, medium or high, and the music would always start at this level however much the volume control was altered last time the set was used. The sets' controls were divided into primary and secondary functions. The latter, which were less frequently used, were placed underneath the hinged aluminium panel where they were protected from dust and accidental movement. A clear distinction was therefore made between the primary choice - accessible through a light touch - and the secondary choice, concealed under a lid hiding what the user did not need for daily use. At a stroke, what had been the norm for hi-fi in the past, with its macho grip and buttons, was eliminated. Instead, designer Jacob Jensen created a new design language, flat 'flush-designed' and electronically communicating, which did not target a few techno-freaks, but a much wider audience who wanted music rather than hi-fi equipment. Beomaster 1900 had connections for two pairs of speakers, headphones, record player and cassette recorder. The receiver won the ID Award in 1976. Livraison Internationale (cotation sur demande) (please feel free to contact me for further details) Worlwide shipment: please contact before bidding   BIEN LIRE AVANT D’ENCHERIR; READ CAREFULLY BEFORE BIDDING   Attention pour la livraison (Be careful for the delivery)   Les objest ne sont pas exemptés des vibrations ou chocs dû au transport (item are not free from vibrations or damages due to the fret)   En cas d'objets endommagés ou problèmes quelconques,  je ne suis pas responsable et donc pas de retour.  Si vous n’êtes pas d’accord avec ces condition de vente,  ne pas enchérir … In case of damages or problem with the fret, I decline all responsabilities and no retunrs accepted. If your not agree with the terms, please don't bid or buy anything.   Tout le matériel qui vous est proposé est testé avant la mise en vente et avant la livraison pour assurer le bon fonctionnement All items are tested before the sale to ensure the perfect work of the item.   L'acheteur potentiel dispose de toute la durée de la mise en vente pour me demander toute information/précision/photo qui lui paraîtraient utiles ou nécessaires pour enchérir. The Seller can ask all the informations and pictures that he needs before bidding or buying any item, I will a

Buddyphones Discover Volume Limiting Kids Headphones | Durable, Comfortable,& Cu   Description BEST CHOICE FOR KIDS WIRED SAFE AUDIO HEADPHONES: BuddyPhones Discover are designed for safety, comfort, and fun. Each BuddyPhone Discover comes with 6 sets of decorative stickers for customization. Perfect for children and toddlers between the age of 3 - 10.,ALWAYS-ON SAFETY VOLUME LIMITER FEATURE: Buddyphones Discover volume is limited to a kid safe level of 85 dB. This volume level is recommended by the World Health Organization as the max volume for children.,AWARD-WINNING DESIGN FOR KIDS: BuddyPhones are tailor made for kids, featuring a super durable and bendable housing that is adjustable for a perfect fit. All BuddyPhones are made with soft and comfortable hypoallergenic padding. The 2 1/2 ft. audio cable is flat to prevent tangles. Their unique, kid-friendly design has won BuddyPhones numerous awards over the past years!,EASY SHARING: The BuddyCable includes a patented, built-in audio splitter for sharing with friends without getting tangled. Up to 4 BuddyPhones can be shared in the same device.,ADDITIONAL FEATURES AND COMPATIBILITY: The 3.5mm gold plated audio jack works with iPads, Kindle, tablets, iPhones, Samsung, Smartphones. They are perfect at home and on the go in combination with laptops, computers, and other audio devices. About us Payment Nous acceptons les paiement par Paypal et carte bancaire, MasterCard, visa, American Express. en cas de problème n'hésitez pas à me contacter. Shipping Généralement nos livraisons se font en 24 - 48 heures, il peut cependant quelquefois, d'avoir quelques jours de retard, bien sûr indépendamment de notre volonté ! il se peut que le colis a été retardé dans un centre de tri, ou que livreur ait des difficultés à trouver votre adresse, dans ce cas la livraison se fait dans un maximum de six à huit jours, si vous avez un problème avec votre colis n'hésite pas n'hésitez pas à nous contacter. Return Vous avez 30 jours pour retourner échanger votre produit, les frais de retour sont à notre charge, en cas de problème n'hésitez pas à me contacter avant de laisser une évaluation négative, nous trouverons ensemble une solution à votre problème ou à votre mécontentement, notre but et que nos clients soient satisfaits à 100%. Copyright © GetProduct.io 2020. Track Page Views With Auctiva's FREE Counter

Fuzz / Distorsion pour guitare et basse, clone de la Wooly Mammoth. Pédale neuve, vendue sans boite.  Ajout d’un Switch 3 positions. Mode standard au centre « WM », Mode avec clipping au germanium « Ge » et un mode avec clipping au silicium « Si ». Les possibilités sonores sont ainsi étendues.  Avec les contrôles « Pinch » et « Wooly » à 0 et le mode de clipping « Ge » ou « Si » on approche la saturation de type Overdrive ou Distorsion. Contrairement aux photographie de l'annonce, j'ai changé les boutons par des plus fins pour un usage plus aisé et de couleur "crème". Commutateur ON/OFF True Bypass. LED de Statut ON/OFF Entrée et sortie jack 6,3mm mono. Alimentation par entrée standard de type Boss® 2,1mm 9V DC. Centre Négatif. Pas de logement interne pour pile. Boîtier en aluminium. Pédale fabriquée, câblée et assemblée à la main en France. Fuzz / distortion for guitar and bass, clone of the Wooly Mammoth. Pedal new, sold without box. Added a 3-position switch. Standard mode in the center "WM", mode with germanium clipping "Ge" and a mode with silicon clipping "Si". The sound possibilities are thus extended. With the "Pinch" and "Wooly" controls at 0 and the "Ge" or "Si" clipping mode, overdrive or distortion saturation is approached. Unlike the ad's photography, I changed the buttons by finer for easier use and color "cream". ON / OFF switch True Bypass. Status LED ON / OFF Input and output jack 6.3mm mono. Standard input power supply type Boss® 2.1mm 9V DC. Negative Center. No internal housing for battery. Aluminum enclosure. Pedal manufactured, wired and assembled by hand in France.

Portable Carrying Case for JBL Charge3 Wireless Bluetooth Speaker Portable, fashion, light and great protective case for JBL Charge3 Bluetooth speaker, protect the speaker from strike and scrape. Perfect for travelling use.  Features: [Durable & Soft Material] Durable and soft silicone material, protects your for JBL Charge 3 speaker from knocking off, protect the aluminum body against scratches, greasy dirt and abrasions. [Easy Outdoor Carrying] Mainly designed for outdoor easy carrying, a carrying hole on the back top lets you carry it to your backpack, bike, acts as acoustic vents to deliver all the high-quality sound expected from the for JBL Charge 3. [Customized Press Button] The case for JBL Charge3 has customized press button icons for volume up and down, Bluetooth, power on/off. [Good-looking Appearance] Exquisite design and available in a variety of bright, fun colors. Can be placed anywhere as a decoration. [Only for JBL Charge3] Kindly note that it is only compatible for the JBL Charge 3 Wireless Bluetooth Speaker. Specification: Material: Silicone Color: Red; Black; Blue (Optional) Item Length: approx. 22cm / 8.66in Item Weight: approx. 86g / 3.03oz Package Size: approx. 20 * 10 * 2.0cm / 7.87 * 3.93 * 0.78in Package Weight: approx. 88g / 3.10oz Package List: 1 * Carrying Case for JBL Charge3  V3760B Le 27-avr.-18 à 04:12:02 Paris, le vendeur a ajouté les informations suivantes:

Sell a SuperMAX card for Yamaha DX7   MEMORY EXTENSION: 512 Memory locations for sounds and functions. ARPEGIATOR: very sophisticate   DELAY   SOUND STACK: 3 multitimbral stacking modes (8x2, 5x3 or 4x4) with VOLUME, COARSE TUNE and FINE TUNE settings on each voice. SOUND CREATOR: a powerful and effective way to create your own sounds on DX7 ROLLING MODE: allows using up to 4 sounds per patch VELOCITY CROSS-SWITCH: allows switching from one sound to other by velocity. TEMPERAMENT: can be set on each key on the keyboard And many other features:  programmable MASTER VOLUME, KEYBOARD ZONES, several MIDI-OUT modes, MIDI DELAY, LOCAL CONTROL, MIDI implementation update (OMNI MODE, MIDI-OUT channel selection, “all keys off”, …)    Installation will not need any soldering, Only screwdriver ! The card is tested in excellent condition Come with full installation documentation and User Manual. Will work only on Yamaha DX7   (will NOT work on DX7S or DX7IID or DX7IIFD)

* * * * *  *  *  *  *  * NORMES CE * Vends cette CB de collection de conception Allemande de marque ASTON modèle M22FM - Idéale pour COLLECTIONNEURS -  - Ideal for COLLECTORS -   ******** elle a 3W de puissance et 22 canaux en FM elle est en bon état de fonctionnement en émission et en réception *** Par contre  au niveau fonctionnement, le bouton "Norm - CH9" est inopérant  le petit prix de cette CB tient compte évidemment de ces remarques) La CB est fournie avec un micro d'origine ASTON en bon état de fonctionnement,  4 molettes de fixation et un cordon d'alimentation avec fusible ( the CB has been rise 3 watt in FM, it is in good working condition for transmission and reception, By cons operation level, the button "Norm - CH9" is inoperative, the small price of this CB takes  into account of course these remarks) The CB comes with a genuine ASTON mic in good working order, 4 fixing wheels and a power cord with fuse. ****** CARACTERISTIQUES  TECHNIQUES : Compact et légère, cette CB est d'une simplicité d'utilisation. Elle a 22 canaux en FM.  Dimensions en mm 155 x 50 x 170 Poids.  Principales commandes et fonctions:  Volume  Squelch - RF Gain - 22 Canaux - 1 W - HF DX / LOC - Norm / Ch9  * * * * * PROFITEZ des Frais de livraison réduits en ce moment avec MONDIAL RELAY Pour la BELGIQUE et le LUXEMBOURG, les frais d'expédition sont de  5,80 euros avec Assurance par Mondial Relay avec retrait du colis dans un point relais prés de chez vous. For BELGIUM and LUXEMBOURG, shipping costs are 5,80 euro with insurance with Mondial Relay with removal of packages in a pick-up point near you. Pour l'ESPAGNE,  l'ITALIE,  l'ALLEMAGNE,  L'AUTRICHE, Le ROYAUME UNI,  le PORTUGAL, les frais d'expédition sont de 13,90 euros avec assurance par Mondial Relayavec retrait du colis dans un point relais prés de chez vous. For SPAIN,  ITALY,  the UNITED KINGDOM,  GERMANY, AUSTRIA and  PORTUGAL, shipping costs are 13,90 euro with insurance and with Mondial Relay with removal of packages in a pick-up point near you * * * * *  PAYEZ directement avec PAYPAL en utilisant votre compte ou avec une carte bancaire habituelle, site entièrement SECURISE)   NOTA: Les frais demandés sont forfaitaires et comprennent les frais postaux, les frais d'emballage et les divers frais se rapportant  à la vente de cet objet. $  $  $  $  $ VOUS TROUVEREZ PEUT ETRE CET ARTICLE UN PEU MOINS CHER AILLEURS, MAIS REGARDEZ BIEN SI ON VOUS PROPOSE  LES MEME GARANTIES SUR L'ARTICLE ET LE MEME SERIEUX DE L'EXPEDITION, SUR MON SITE  VOUS POUVEZ ACHETEZ EN TOUTE CONFIANCE et si vous achetez 2 articles ou plus je vous offre les frais d'envois du 2ème article et des suivants? (offre valable en France métropolitaine uniquement) VOUS POUVEZ VOIR MES NOTATIONS FAITES PAR LES EURS, ELLES PROUVENT LE SERIEUX ET LA QUALITE DE MES VENTES.  N'hésitez pas à consulter mes autres objets en vente ! (Offer valid in France only by cons of shipping to EUROPE will be reduced if you buy multiple items) ********  (Photos réelles de l'article, pas de surprise vous achetez ce que vous voyez... ) (Photos of actual item, no surprise you buy what you see...)  * * * * *

Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303. As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds, without diluting the essential TB-303 character. MODS INCLUDE: VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob. Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods. VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob. VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff cont

Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303.  As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds,  without diluting the essential TB-303 character.  MODS INCLUDE:  VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob.  Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods.  VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob.  VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff con

JVC SEA-RM20  Became To my personnal JAPAN Hifi Collection Remote System Controller / Graphic Equalizer (1986) VERY RARE JVC SEA-RM20 !!! -  EQUALIZER AND REMOTE SYSTEM CONTROLLER, TESTED OK.  État : Occasion  Service de livraison : Colissimo national & international Tested and working "Computerized Remote System Control".  Made in Japan 1980's. Works 100%, no issues.  Includes original remote control. This unit is a type of preamplifier in that you canuse it to control the volume from line input devices like CD players, tuners,tape decks, etc.  It also has a graphic equalizer with 5 memory settings and you can control all the frequencies of the EQ from the remote control whichis something I have not seen before.  You can switch to a real time spectrum analyzer display which will move to the music.   Other features include JVC's SEA "acoustic expander" which does exactly what you'd expect.  The EQ has 5 memory settings and a reverse setting aswell which instantly give you the exact opposite eq curve.   Allbuttons, controls, features, and display are working correctly.  Shows very little wear. All buttons on remote are working correctly- the remote can control other JVC components as well.    On the back are three line inputs- one labelled Audio, one labelled Video 1, and one labelled Video 2/3.  Youcould use these inputs for a tuner, a CD deck, and a tape deck.  There are also two sets of stereo outputs.  In order to use the EQ and graphic display and volume control all at the same time you need to loop the outputlabelled "Line Out" into the "Remote Contro In"-  am including the JVC instruction book and the original remote controller for this purpose. Specifications Output Level: 1V (4.5V max) Gain: ± 0dB Frequency response: 10Hz to 50kHz Signal to Noise Ratio: 100dB Total harmonic distortion: 0.03% Control Range: ± 10dB Frequency Bands: 63, 160, 400, 1K, 2.5K, 6.3K, 16KHz Dimensions: 435 x 77 x 225mm Weight: 2.6kg Finish: black Accessories: RM-S20 remote control Year: 1986

Lot minidiscs and accessories, recently pulled from storage. Comprises the following (all briefly tested and working, unless otherwise noted with >): Kenwood DMC-P33 x 2, good condition Kenwood DMC-P55, good condition Kenwood remote for above Sharp MD-DP700 speaker cradle (no AC required) Sharp remote for above Sony MZ-NH900 cradle Panasonic SJ-MJ57/58/59/500 speakers (no AC required) Panasonic remote for above (also fits SJ-MJ100) AA battery box for above x 2 2.5mm > 3.5mm patch cable Sony RM-MC11EL   > control behaviour sometimes erratic Panasonic remote   > controls work, but LCD broken Sharp remote   > untested Sony battery box (DC in) Sony battery box Sharp battery box Panasonic battery box Panasonic battery box   > poor connection (clean terminal) Kenwood DMC-V55   > powers up, can't read disc Kenwood DMC-Q77   > powers up, can't read disc (front panel DMC-T55) Sony RM-MC33EL   > seems OK, though volume control rather sensitive loads of NiMH batteries, boxes   > untested, assumed dead loads of disc labels Shipped from France. If you do have any questions then please drop me a line. *** Lot Minidisques et accessoires, récemment retiré du stockage. Comprend les éléments suivants (tous brièvement testés et fonctionnels, sauf indication contraire avec >): Kenwood DMC-P33 x 2, bon état Kenwood DMC-P55, bon état Télécommande Kenwood pour ci-dessus Station d'accueil Sharp MD-DP700 (pas de secteur requis) Télécommande Sharp pour ci-dessus Socle Sony MZ-NH900 Haut-parleurs Panasonic SJ-MJ57/58/59/500 (pas de secteur requis) Télécommande Panasonic pour ci-dessus (convient également au SJ-MJ100) Boîte de piles AA pour ci-dessus x 2 Câble de raccordement 2,5 mm > 3,5 mm Sony RM-MC11EL   > comportement de contrôle parfois erratique Télécommande Panasonic   > les commandes fonctionnent, mais l'écran LCD est cassé Télécommande Sharp   > non testé Boîtier de batterie Sony (entrée DC) Boîtier de batterie Sony Boîtier de batterie Sharp Boîtier de batterie Panasonic Boîtier de batterie Panasonic   > mauvaise connexion (borne propre) Kenwood DMC-V55   > s'allume, impossible de lire le disque Kenwood DMC-Q77   > s'allume, impossible de lire le disque (face avant DMC-T55) Sony RM-MC33EL   > semble OK, bien que le contrôle du volume soit plutôt sensible beaucoup de piles NiMH, des boîtes   > non testé, supposé mort beaucoup d'étiquettes de disques Expédiés de la France. Merci de demander si vous avez des questions.

See: http://www.dact.com/html/attenuators.html High-end sound and specifications Compact design – easy to mount in most existing audio amplifiers as DIY upgrade. Audio volume controls with very accurate attenuation and tracking (0.05dB). Resistor network using Surface Mount Device (SMD) type of resistors for short signal path and very low series inductance and stray capacitance Available as master volume control with 60dB attenuation range (1, 2, 4, 6, 8 decks) and as individual channel fine adjustment control with 0.5dB level change between each step (only available with 1 deck).