Deployment

1 routeur Cisco 1750 en état de marche avec bloc d'alimentation Le routeur dispose d'un port ethernet 10/100Mbps, d'un port console RS232 et d'un port AUX, et de 3 slots libres pour cartes d’extensions de type WIC Remise en main propre ou envoi possible Détail du show version: Router#sh ver Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1700-K9O3SY7-M), Version 12.2(2)XJ, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Tue 11-Sep-01 22:29 by ealyon Image text-base: 0x80008108, data-base: 0x80CB5920 ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1) ROM: C1700 Software (C1700-K9O3SY7-M), Version 12.2(2)XJ, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Router uptime is 8 minutes System returned to ROM by reload System image file is "flash:c1700-k8o3sy7-mz.122-2.XJ.bin" cisco 1750 (MPC860T) processor (revision 0x601) with 27853K/4915K bytes of memory. Processor board ID JAD05030098 (1576915446), with hardware revision 3097 MPC860T processor: part number 0, mask 32 Bridging software. X.25 software, Version 3.0.0. 1 FastEthernet/IEEE 802.3 interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 Router#

Supermicro AOC-UIBQ-M1 Single Port 40Gbps InfiniBand Adapter HBA / NIC • UIO Low-profile Single-Port 40Gb InfiniBand card• Interface: PCI-E 2.0 x8   only spare oem card - no cable         Single-port InfiniBand QDR UIO Adapter Card with PCI-E 2.0 and Virtual Protocol Interconnect™ (VPI) AOC-UIBQ-m1 InfiniBand card with Virtual Protocol Interconnect (VPI) provides the highest performing and most flexible interconnect solution for performance-driven server and storage clustering applications in Enterprise Data Center, High-Performance Computing, and Embedded environments. Clustered databases, parallelized applications, transactional services and high-performance embedded I/O applications will achieve significant performance improvements resulting in reduced processing time and lower costs per operation. AOC-UIBQ-m1 simplifies network deployment by consolidating clustering, communications, storage, and management I/O and by providing enhanced performance in virtualized server environments. Key Features • Virtual Protocol Interconnect™ (VPI) • 1μs MPI ping latency • Selectable 40Gb/s InfiniBand or 10GbE port • PCI Express 2.0 (up to 5GT/s) • CPU offload of transport operations • End-to-end QoS and congestion control • Hardware-based I/O virtualization • TCP/UDP/IP stateless offload • Fibre Channel encapsulation (FCoIB or FCoE) Specifications • InfiniBand: –– Mellanox® ConnectX®-2 IB QDR (MT25408B0-FCC-QIS) –– Single InfiniBand QSFP port –– 40Gb/s per port –– RDMA, Send/Receive semantics –– Hardware-based congestion control –– Atomic operations • Interface: –– PCI Express 2.0 x8 (5GT/s) –– UIO low-profile half-length form factor • Connectivity: –– Interoperable with InfiniBand or 10GbE switches –– QSFP connector –– 7m (40Gb/s) maximum copper cable length –– External optical media adapter and active cable support • Hardware-based I/O Virtualization: –– Single Root I/O –– Address translation and protection –– Multiple queues per virtual machine –– VMware NetQueue support –– PCISIG IOV compliant • CPU Offloads: –– TCP/UDP/IP stateless offload –– Intelligent interrupt coalescence –– Microsoft RSS and NetDMA compliant • Storage Support –– T10-compliant Data Integrity Field support –– Fibre Channel over InfiniBand or Ethernet (FCoIB or FCoE) • Operating Systems/Distributions: –– Novell SLES, RedHat, Fedora and others –– Microsoft® Windows Server 2003/2008/CCS 2003 –– OpenFabrics Enterprise Distribution (OFED) –– OpenFabrics Windows Distribution (WinOF) –– VMware ESX Server 3.5, Citrix XenServer 4.1 • Operating Conditions: –– Operating temperature: 0°C to 55°C • Physical Dimensions: –– Card PCB dimensions: 14.29cm (5.63”) x 6.35cm (2.50”) (LxW) –– Height of end brackets: standard – 12cm (4.725in), low-profile – 7.94cm (3.13in) • Optional Accessories: –– CBL-0417L: 39.37” (100cm) QSFP to QSFP InfiniBand QDR PBF –– CBL-0325L: 78.74” (200cm) QSFP to QSFP InfiniBand QDR –– CBL-0446L: 118.11” (300cm) QSFP to QSFP InfiniBand QDR –– CBL-0422L: 196.85” (500cm) QSFP to QSFP InfiniBand QDR –– CBL-0467L: 7M QSFP to QSFP InfiniBand QDR Passive Copper Cable –– CBL-0468L: 15M QSFP to QSFP InfiniBand QDR Fiber Active Optical Cable Compliance/Environmental –– RoHS Compliant 6/6, Pb Free Supported Platforms –– Supported Motherboards: All Supermicro UIO Motherboards –– Supported Servers: All Supermicro UIO Servers   Our store specializes in spare part, all our products are sold reconditioned by us, All part-number are sold used with 3-month warranty with antistatic bags  without  original packaging no drivers or cable. We deliver worldwide, transport rates are shown in bid, thank you select your country to get the price of your transport. We use a single tra

Dual Band - Single Radio controller based thin access point - Supports 802.11 a/b/g/n at 300Mbps. PoE power option. Mounting Kit is not included. The FortiAP-220B is a durable, business-grade high performance 802.11n solution that delivers up to 600 Mbps of total throughput. It uses a dual concurrent frequency (2.4 GHz and 5 GHz) with 2x2 MIMO technology designed for demanding use cases for any indoor deployment. The FortiAP-220B has 4 antennas which enable it to provide concurrent operations on both 2.4 GHz and 5 GHz frequencies supporting 802.11a, b, g and n. The access point is capable of continuous air monitoring for rogue AP detection while delivering high throughput traffic to Wi-Fi clients. Fortinet offers industry’s largest selection of WLAN controllers for all thin access points including the FortiAP-220B. Moreover, these controllers provide a unified wired and wireless console, giving you a single pane of glass management solution while reducing the total cost of ownership. The FortiAP-220B is an enterprise-grade AP that not only provides uninterrupted client access but also offers intelligent application detection and traffic shaping capabilities.

The HP Switch 3500 Series consists of the most advanced intelligent edge switches. The 3500 series includes 48-port stackable. The foundation for all these switches is a purpose-built, programmable ProVision ASIC that allows the most demanding networking features, such as Quality of Service (QoS) and security, to be implemented in a scalable yet granular fashion. With a variety of Gigabit and 10/100 interfaces, integrated PoE option, 10-GbE capability on Gigabit switches, the 3500 switches offer excellent investment protection, flexibility, and scalability, as well as ease of deployment, operation, and maintenance.

Store category Sign Up Now ! You may also like Description du produit   Contactez nous: 04/68/70/68/97; ipczen@gmail.com L'informatique sans coup de bambou Switch 24 Cisco catalyst 2960series PoE-24 WS-C2960-24PC-L V02 Marque: Cisco   - Cisco WS-C3560-24PC-L V02  24 X 10/100 PoE + 2 SFP Ethernet Switch - The Cisco Catalyst 3560 Series switches is a line of fixed configuration, enterprise-class, IEEE 802.3af and Cisco prestandard Power over Ethernet (PoE) switches in Fast Ethernet configurations that provide availability, security, and quality of service (QoS) to enhance network operations. - The Catalyst 3560 is an ideal access layer switch for small enterprise wiring closets or branch office environments that are using their LAN infrastructure for the deployment of new products and applications such as IP telephones, wireless access points, video surveillance, building management systems, and remote video kiosks. - Customers can deploy network-wide intelligent services, such as advanced QoS, rate limiting, access control lists, multicast management, and high-performance IP routing-while maintaining the simplicity of traditional LAN switching. - Embedded in the Catalyst 3560 is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure and troubleshoot multiple Cisco Catalyst desktop switches using a standard Web browser. Cisco CMS Software provides configuration wizards that greatly simply the implementation of converged networks and intelligent network services.     Qui sommes-nous ? Nous commercialisons essentiellement du matériel reconditionné. Contacter notre boutique par mail ipczen@gmail.comou par téléphone 0468706897de 14h à 18h30 le Lundi et de 9h30-12h30 à 14h-18h30 du Mardi au Vendredi Nous sommes une société enregistrée au RCS au numéro 518 583 208 Paiement Le paiement de ce produit peut se faire par Paypal, Carte Bancaire, Chèque ou Virement bancaire. Merci de préciser le numéro d'objet et votre pseudo dans votre virement ou chèque. Au cas ou votre paiement n'est pas effectif dans les 7 jours suivant la fin de l'enchère nous nous reservons le droit d'annuler votre achat et de remettre en vente cet article. Livraison et Garantie Ce produit sera expédié sous 3 jours avec numéro de suivi. Nous acceptons les retours. Vous disposez d'un délai de 7 jours à compter de la date de réception de votre achat pour renvoyer votre colis. {{titlepaymentterms}} {{titleshippingterms}} {{titlesalesterms}} {{titleaboutus}} {{titlecontactus}} Termes de paiments Paiement: Remboursement si vous n'avez pas reçu ce que vous aviez commandé en cas de paiement avec PayPal. Consultez les conditions. Retours: Remboursement sous 14 jours, acheteur Termes de livraison Lieu où se trouve l'objet: Sigean, France métropolitaine Lieu de livraison: Union européenne Délai de livraison: Varie Il se peut que la livraison ne soit pas offerte vers les Etats-Unis - Consultez la description de l'objet ou contactez le vendeur pour en savoir plus sur les options de livraison. Termes de ventes Délai d'expédition nationale Envoie sous 2 jours ouvrables après la réception du paiement. TVA: 20.0% (comprise dans le prix affiché). Si vous avez des questions concernant cette TVA, veuillez contacter le vendeur. Les conditions d'application et les taux de la TVA peuvent varier en fonction du montant final de la vente. A propos de nous ipczendiscount 98,8% d'évaluations positives Numéro de TVA: FR 04518583208 Contactez nous Localisation: 17 avenue de perpignan 11130 sigean, Languedoc-Roussillon France métropolitaine Téléphone: 04 68 70 68 97 E-mail: contact@ipczen.fr

Alcatel-lucent OmniSwitch 6450 famille de commutateurs LAN Gigabit Ethernet empilables   Données constructeur: OmniSwitch 6450-P48L La famille de commutateurs de valeur LAN Ethernet et Gigabit Ethernet rapides empilables d'alcatel-lucent OmniSwitch® 6450 offre une polyvalence, commutateurs de configuration fixes 24/48 ports avec liaisons ascendantes 10 GigE et fournit des chemins de mise à niveau pour Ethernet 10 gigabits (GigE) empilement, 10 liaisons montantes GigE et services Ethernet de métro.   Promouvoir une conception optimisée pour la flexibilité, l'évolutivité et la faible consommation d'énergie, l'omniswitch 6450 est une solution de pointe exceptionnelle. Il utilise le système d'exploitation AlcatelLucent éprouvé sur le terrain (AOS) pour fournir hautement disponible, sécurisé, réseaux auto protecteurs, facilement gérés et respectueux de l'environnement. La famille OmniSwitch 6450 est intégrée aux dernières innovations technologiques et offre une protection maximale des investissements. Les types de déploiements suivants bénéficient de la famille OmniSwitch 6450: • Bord des réseaux de petite à moyenne taille • Groupes de travail sur les entreprises et les campus des succursales • Demandes de services résidentiels et gérés commercialement • Déploiement de réseaux de fournisseurs de services   N’hésitez pas à nous faire une offre.     Alcatel-lucent OmniSwitch 6450 stackable Gigabit Ethernet LAN switch family Manufacturer data: OmniSwitch 6450-P48L The Alcatel-Lucent OmniSwitch® 6450 family of Stackable Fast Ethernet and Gigabit Ethernet LAN value switches provides versatility, 24/48 port fixed configuration switches with 10 GigE uplinks and provides upgrade paths for 10 Gigabit Ethernet (GigE) stacking, 10 GigE uplinks and metro Ethernet services. Promoting a design optimized for flexibility, scalability, and low power consumption, the omniswitch 6450 is an exceptional state-of-the-art solution. It uses the field-proven AlcatelLucent operating system (AOS) to provide highly available, secure, self-protecting, easily managed and environmentally friendly networks. The OmniSwitch 6450 family is integrated with the latest technological innovations and offers maximum investment protection. The following types of deployments benefit from the OmniSwitch 6450 family: • Edge of small to medium size networks • Working groups on companies and branch campuses • Requests for residential and commercially managed services • Deployment of service provider networks Please don't hesitate to make us an offer.

.........................................French description below / Descriptif francais plus bas........................................ summary The HP E2610 Switch Series consists of five switches. The HP E2610-24 and E2610-48 provide 24 and 48 ports of 10/100 connectivity. The HP E2610-24 is fanless switch with quiet operation, making it ideal for deployment in open spaces. The HP E2610-24-PPoE, E2610-24-PoE, and E2610-48-PoE are IEEE 802.3af-compliant for Power over Ethernet (PoE) and provide up to 15.4 W for 12, 24, and 48 ports. The E2610-24-PPoE switch has 24 10/100 ports and provides 12 ports of PoE. All HP E2610 Switch Series include two 10/100/1000Base-T ports and two mini-GBIC slots for Gigabit uplink connectivity. An optional redundant external power supply is also available to provide redundancy in the event of a power supply failure. With static routing, robust security and management features, free lifetime warranty, and free software updates, the HP E2610 Switch Series is a cost-effective solution for customers who are building converged enterprise edge networks.  Related products Technical SpecificationsConnectivityRouting/switching capacity17.6 GbpsNetworkingAddress table size8000 entriesManagement featuresHP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)Device managementHTML and telnet managementGeneral protocolsIEEE 802.1D MAC Bridges; IEEE 802.1p Priority; IEEE 802.1Q VLANs; IEEE 802.1v VLAN classification by Protocol and Port; IEEE 802.1w Rapid Reconfiguration of Spanning Tree; IEEE 802.3ad Link Aggregation Control Protocol (LACP); IEEE 802.3af Power over Ethernet; IEEE 802.3x Flow Control; RFC 768 UDP; RFC 783 TFTP Protocol (revision 2); RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 854 TELNET; RFC 951 BOOTP; RFC 1542 BOOTP Extensions; RFC 2030 Simple Network Time Protocol (SNTP) v4; RFC 2131 DHCP; RFC 3046 DHCP Relay Agent Information OptionIP MulticastRFC 3376 IGMPv3MIBsRFC 1213 MIB II; RFC 1493 Bridge MIB; RFC 1573 SNMP MIB II; RFC 2021 RMONv2 MIB; RFC 2096 IP Forwarding Table MIB; RFC 2613 SMON MIB; RFC 2618 RADIUS Client MIB; RFC 2665 Ethernet-Like-MIB; RFC 2668 802.3 MAU MIB; RFC 2674 802.1p and IEEE 802.1Q Bridge MIB; RFC 2737 Entity MIB (Version 2); RFC 2863 The Interfaces Group MIBNetwork managementIEEE 802.1AB Link Layer Discovery Protocol (LLDP); RFC 3164 BSD syslog Protocol; RFC 3176 sFlow; ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED); SNMPv1/v2c/v3SecurityIEEE 802.1X Port Based Network Access Control; RFC 1492 TACACS+; Secure Sockets Layer (SSL); SSHv1/SSHv2 Secure ShellLatency100 Mb Latency:

Multiservice 802.11n dual band concurrent 2 stream Wired/Wireless wall switch Ruckus ZoneFlex 7055 - ZoneFlex 802.11n dual-band concurrent 2.4 GHz & 5 GHz, Wired/Wireless Wall Switch, 1 10/100/1000 & 4 10/100 Ethernet Access Ports, POE in, 802.3af Ethernet out (one port), PBX pass through. Does not include DC power supply. This part is the international version for all countries besides USA and China.  The ZoneFlex 7055 is the industry"s first dual-band dual-concurrent wall mounted wired switch and wireless wall switch designed for next generation wireless. The ZoneFlex 7055 features integrated 2.4GHz and 5GHz concurrent 802.11n WLAN radios, five wired Ethernet ports, PoE ouput, and a passthrough port for devices such as digital phones that require native access to a PBX system. Designed with hotels and multi-dwelling units in mind, the ZoneFlex 7055 is easy to mount to an electrical junction box and has a sleek and low-profile form factor. It provides flexible deployment options with Ruckus SmartMesh Networking for areas without existing Ethernet infrastructure.

ZYXEL GS-4012F 12 port Gigabit SFP Open Slot Layer 3 Managed Switch. État : "Occasion" ****you get only what you see in the pictures**** Good conditiontested, working well The ZyXEL GS-4012F is an intelligent Layer-3 Gigabit Ethernet switch specially designed for service providers to deliver profitable Ethernet services. With high-performance switching functionalities suitable for triple-play services such as Internet data exchange, Web surfing, IPTV and VoIP telephony, the GS-4012F enables service providers to deploy integrated and value-added IP services.The GS-4012F is a low port density solution for service providers; with 8 open SFP slots and 4 GbE dual-personality ports, the GS-4012F can easily fit into any fiber-intensive deployment scenarios.

Routeur / Firewall Unifi Security Gateway, en très bon état. Complet, dans son emballage d'origine. Ubiquiti UniFi USG Enterprise Security Gateway Router - 3gigabit RJ45 Ports, QOS, VLAN, VPS support Features: The Ubiquiti UniFi USG Enterprise Security Gateway extends the UniFi Enterprise System to encompass routing and security for your network. This Ubiquiti UniFi USG Enterprise Security Gateway combines advanced security features with high-performance routing technology in a compact and cost-effective unit. Capable of routing up to 1 million packets per second, the Ubiquiti UniFi USG Enterprise Security Gateway can also be easily configured through the intuitive UniFi Controller software, which also manages the UniFi Access Points for wireless networking. Key Features Three (3) 10/100/1000 Gigabit Ethernet RJ45 ports* 1 million packets per second for 64-byte packets 3 Gbps total line rate for packets 512 MB or larger Integrated and managed with UniFi Controller v4.x VPN Server for Secure Communications between branches/offices Clear calls and lag-free, video streaming with QoS for voice/video call Virtual network segment creation for security and network traffic management Secure off-site management and monitoring CLI management for advanced users Silent, fanless operation Deployment As part of the UniFi Enterprise System, this Ubiquiti UniFi USG Enterprise Security Gateway is deployed in the same manner as UniFi APs. Detection, provisioning, and management are all conducted from the UniFi Controller. The UniFi Controller may reside on a management station located either on-site and connected to the same Layer-2 network, or off-site in a cloud or NOC. UniFi Controller v4  Introducing the new UniFi Controller software featuring a refreshed UI and support for the next generation of UniFi devices. Bundled at no extra charge, the UniFi Controller software conducts device discovery, provisioning, and management of the UniFi Security Gateway and other UniFi devices through a single, centralised interface. Improved User Experience Redesigned to be more intuitive and easier to navigate, the new UI raises the bar for enterprise network management efficiency. Important network details are logically organised for a simplified, yet powerful, interface. Packed with Features Use the UniFi Controller to provision thousands of UniFi APs and UniFi Security Gateways, map out networks, quickly manage system traffic, and provision additional UniFi devices. Network Overview A comprehensive overview of your Network Health is readily available in the new dashboard. Monitor your network’s vitals and make on-the-fly adjustments as needed. Detailed Analytics Use the configurable reporting and analytics to monitor large user groups and expedite troubleshooting. Multi-Site Management A single UniFi Controller running in the cloud can manage multiple sites: multiple, distributed deployments and multi-tenancy for managed service providers. Each site is logically separated and has its own configuration, maps, statistics, guest portal, and administrator read/write and read-only accounts. LAN/WLAN Groups The UniFi Controller can manage flexible configurations of large deployments. Create multiple LAN and WLAN groups and assign them to the respective UniFi devices. Maps  Upload a map of your location(s) or use Google Maps to represent the areas where your UniFi devices are located. Powerful Analytic Capabilities Monitor network performance and activity with customised statistic views. See the latest statistics, or view historic data of past hours or months. Specification: Dimensions 135 x 135 x 28.3 mm (5.32 x 5.32 x 1.11") Weight 366 g (12.9 oz) Processor Dual-Core 500 MHz, MIPS64 System Memory 512 MB DDR2 RAM On-Board Flash Storage 2 GB Max. Power Consumption 7W Power Supply 12VDC, 1A Power Adapter (Included) Power Input 9 to 24VDC, Supporte

WATERCOOLED WITH A SPECIFIC EKWB WATERBLOCK. DOES NOT HEAT ANYMORE.IMPROVED PERFORMANCES Adaptec RAID 81605ZQ with maxCache12Gb/s PCIe Gen3 SAS/SATA RAID adapter with 16 internal native ports and LP/MD2 form factor. Operating SystemMicrosoft Windows Red Hat Linux SUSE Linux Fedora Debian Linux Ubuntu Linux Sun Solaris FreeBSD VMware ESXi For a detailed list see ASK Answer ID 17318.BenefitsIdeal for 12Gb/s performance-hungry server and workstations platforms, without compromising proven Adaptec reliabilityCustomer NeedsHigh I/O transaction and high bandwidth processing; solutions that reduce energy consumption and maintenance costs.Key RAID Features? maxCache SSD Caching software ? Flexible Configuration: HBA Mode & Auto Volume Mode for automatic deployment ? Optimized Disk Utilization (Multiple Arrays per disk) ? Supported RAID levels: 0, 1, 1E, 5, 6, 10, 50, 60 ? Supports up to 256 SAS or SATA devices using SAS expanders ? Support for native 4K sector SAS and SATA devices in addition to 512byte sector devices ? Hybrid RAID 1 & 10 ? Quick initialization ? Online Capacity Expansion ? Performance modes: Dynamic, OLTP & Big Block ByPass ? Copyback Hot Spare ? Dynamic caching algorithm ? Native Command Queuing (NCQ) ? Background initialization ? Hot-plug drive support ? RAID Level Migration ? Hot spares - global, dedicated, and pooled ? Automatic/manual rebuild of hot spares ? SES and SAF-TE enclosure management ? Configurable stripe size ? S.M.A.R.T. support ? Multiple arrays per disk drive ? Dynamic sector repair ? Staggered drive spin-up ? Bootable array support ? Support for Tape Devices, Autoloaders ? MSI-X support for all device driver for all supported Operating Systems ? Secure boot support for the uEFI host biosManagement UtilitiesSoftware ? Adaptec maxView Storage Manager ? Web based GUI Management Utility ? OS Support: Windows, Linux, Solaris VMware ? Remote configuration, monitoring & notification ? Remote firmware updates ? SMI-S Support ? SMTP ARCCONF ? Command Line Interface ? SMI-S support for VMware Adaptec BIOS Configuration Utility (CTRL+A) ? BIOS level configuration utility ? Flashable BIOS support Adaptec uEFI BIOS Configuration Utility ? HII based confi guration utility ? Flashable BIOS supportData Transfer Rate12Gb/s per portBus System Interface8-lane PCIe Gen3Form FactorMD2 ? Low Profile Cache Memory1024MBConnector ConfigurationFour internal mini SAS HD (SFF-8643)Package Contents? Adaptec RAID 81605ZQ adapter ? Additional low profile vented bracket Physical Size2.535"H x 6.6"L (64mm x 167mm)Operating Temperature0°C to 55°C* (with 200 LFM airflow) Note: This Adaptec card contains a powerful RAID processor which requires adequate airflow to operate reliably. Please install this card only into server or PC chassis with recommended airflow (200 LFM). * Ambient temperature measured 1" away from the RAID processorOperating Voltage1.0A @ 3.3VDC 1.1A @ 12VDCRegulatory CertificationCE, FCC, UL, C-tick, VCCI, KCC, CNSEnvironmental ComplianceRoHSMean Time Before Failure (MTBF)>700,000 hours at 40°C

C888SRST-K9 Overview The Cisco 888 SRST Integrated Services Router combine Internet access, security, voice, and wireless services onto a single, secure device that is simple to use and manage for small businesses and enterprise small branch offices and teleworkers. The C888SRST-K9 delivers features including firewall, content filtering, VPNs, and wireless LANs (WLANs) at broadband speeds to small offices. Easy deployment and centralized management features enable enterprises or service providers to deploy the Cisco 888 SRST in small branch offices or small businesses. Description C888SRST-K9 Technical Specifications Cisco SRST888 G.SHDSL / FXS / BRI / Sec Router Product Description: Cisco SRST888 G.SHDSL/FXS/BRI/Sec Router Manufacturer Part Number: C888SRST-K9 Product Series C888 Management Port: Yes Total Number of Ports: 9 Carrier Supported: ISDN Network Technology: 10/100Base-TX Network Technology: ISDN BRI (S/T) Ethernet Technology: Fast Ethernet Dimensions (H x W x D): 1.8″ x 12.8″x 9.8″ Weight: 5.50 lb Power Source: Power Supply

Small Form-Factor Pluggable (SFP) interfaces from MRV Communications provide fl exible high speed links in a small industry standard package.   They deliver the deployment options and inventory control that network administrators demand for growing networks. SFPs are designed to Multi-Source Agreement (MSA) standards to ensure network equipment compatibility.   They are a perfect addition to MRV ‘s extensive lines of networking equipment.

Product DescriptionSophos AP10 - wireless access pointDevice TypeWireless access pointForm FactorExternal Data Link ProtocolIEEE 802.11b, IEEE 802.11g, IEEE 802.11nFrequency Band2.4 GHzPerformanceThroughput: 150 MbpsCapacityMaximum number of users: 10PowerAC 120/230 V (50/60 Hz)Dimensions (WxDxH)4.9 in x 3.8 in x 1 in Connectivity TechnologyWirelessData Link ProtocolIEEE 802.11b, IEEE 802.11g, IEEE 802.11nFrequency Band2.4 GHzPerformanceThroughput: 150 MbpsCapacityMaximum number of users: 10Status IndicatorsPower, WLAN, LANFeaturesFirmware upgradable, wall mountable, RADIUS supportEncryption AlgorithmWPA, WPA2, WEPAuthentication MethodRADIUSCompliant StandardsIEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n Interfaces1 x 100Base-TX - RJ-45 Compliant StandardsVCCI, MIC, FCC, EN 60950-1, FCC CFR47 Part 15 C, ANSI C63.4-2003, EN 300 328, EN 301 489-1, EN 301 489-17 Power Consumption Operational8 Watt Voltage RequiredAC 120/230 V (50/60 Hz) Antenna AntennaExternal detachableAntenna Qty1Gain Level2 dBi - Plug and Play deployment Set up multiple wireless access points within minutes. Sophos access points require no local configuration. Deploying Sophos access points is easy. Simply plug in the Sophos access point anywhere on your LAN. The access point will find the controller, retrieve its IP address via DHCP, and import the configuration. The device automatically appears in the Sophos UTM user interface. - Strong encryption Sophos UTM wireless protection supports the strongest encryption and authentication standards available. Wireless connections are completely secure. To prevent unauthorized wireless access, Sophos UTM wireless protection supports the most advanced encryption and authentication standards available today. It features WPA2-Enterprise in combination with IEEE 802.1X. This proven block-based encryption standard provides the highest level of assurance that data is protected. Also, monitoring capabilities in Sophos UTM allow administrators to easily detect failed authentication attempts. - Integrated security Sophos access points seamlessly integrate into the Sophos UTM appliance for complete UTM security. Sophos access points forward wireless traffic to the Sophos UTM appliance, where all security applications run. The wireless clients obtain the same level of UTM security as if they were physically connected to the LAN. Sophos UTM wireless protection simplifies the operation of reliable and secure wireless networks. The Sophos UTM appliance works as a wireless controller to centralize wireless network management and security. Sophos access points are automatically set up and configured by the UTM appliance.

Lire la suite AFFICHER LA SUITE MASQUER LA SUITE Voir tous les articles Brother Voir les autres imprimante Brother Détails Techniques Détails techniques VITESSE D'IMPRESSION Couleur: Non Résolution maximale: 2400 x 600 DPI Technologie d'impression: Laser Vitesse d'impression (noir, qualité normale, A4/US Letter): 30 ppm Temps de préchauffage: 26 s Délai de copie de la première page (Noir, normal): 8,5 s Impression recto-verso: Oui Vitesse d'impression recto verso (Noir, qualité normale, A4/US Letter): 7,5 ppm Temps de préchauffage (à partir du mode veille): 17,5 s CARACTÉRISTIQUES Nombre de cartouches d'impression: 1 Cycle de service (conseillé): 250 - 2000 pages par mois Langues de la description de page: GDI CAPACITÉ D'ENTRÉE ET DE SORTIE Type d'alimentation papier: Bac à papier Capacité d’alimentation totale: 250 feuilles Capacité de sortie totale: 150 feuilles GESTION DU PAPIER Poids de support prise en charge en mode recto-verso: 60 - 105 g/m² Grammage du support, chargeur automatique de documents: 60 - 163 g/m² Tailles enveloppes: 10,C5,DL,Monarch ISO, Format Series A (A0...A9): A4,A5,A6 Tailles du support d'impression non-ISO: Executive, Letter Personalisation de la largeur support: 76,2 - 215,9 mm Personalisation de la longueur support: 127 - 355,6 mm Taille de papier de série A ISO maximum: A4 Type de support du bac papier: papier bond, Enveloppes, Étiquettes, Papier ordinaire, Papier recyclé, Papier épais, Papier fin Poids du support de bac papier: 60 - 230 g/m² CONNECTIVITÉ Impression directe: Oui Interfaces standards: USB 2.0, LAN sans fil RÉSEAU Standards wifi: 802.11b,802.11g,Wi-Fi 4 (802.11n) Algorithme de sécurité soutenu: 64-bit WEP,128-bit WEP,WPA-PSK,WPA2-PSK Wifi: Oui Prise en charge des protocoles réseau (IPv4): ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, SMTP Client, IPP/IPPS, FTP Server, SNMPv1/v2c/v3, HTTP/HTTPS server, TFTP client and server, ICMP, Web Services (Print) Prise en charge des protocoles réseau (IPv6): NDP, RA, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, SMTP Client, FTP Server, SNMPv1/v2c/v3, HTTP/HTTPS server, TFTP client and server, ICMPv6, Web Services (Print) Wi-Fi Direct: Oui Technologies d'impression mobile: Apple AirPrint,Google Cloud Print,Mopria Print Service REPRÉSENTATION / RÉALISATION Fréquence du processeur: 600 MHz Intégré dans le processeur: Oui Niveau sonore (prête): 6,56 dB Niveau de pression sonore (impression): 48 dB DESIGN Écran: LCD Couleur du produit: Gris Nombre de ligne affichées: 1 lignes Écran integré: Oui PUISSANCE Consommation électrique (arrêt): 0,5 W Consommation d'énergie (mode économie): 3,9 W Consommation d'énergie (mode veille): 48 W Consommation électrique moyenne en mode Impression: 460 W Energy Star, consommation électrique typique (TEC): 1,18 kWh/semaine CONFIGURATION MINIMALE DU SYSTÈME Prise en charge du système d'exploitation Windows: Windows 10,Windows 7,Windows 8,Windows 8.1 Prise en charge du système d'exploitation Mac: Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks Prise en charge du système d'exploitation serveur: Windows Server 2008,Windows Server 2012,Windows Server 2012 R2,Windows Server 2016 DURABILITÉ Certificats de durabilité: ENERGY STAR POIDS ET DIMENSIONS Poids: 7,2 kg Hauteur: 183 mm Largeur: 356 mm Profondeur: 360 mm CONTENU DE L'EMBALLAGE Logiciels fournis: Windows: Printer Drivers, Status Monitor, BRAdmin Light, Driver Deployment Wizard Mac: (Download above software for Mac from Brother Solutions Centre) Code EAN 4977766782524 Référence produit 04200177 Référence constructeur HLL2350DWRF1 Recherches associées imprimantes multifonction imprimantes laser imprimantes jet d'encre scanner accessoires imprimantes cartouches/toner papier imprimantes a4

Intel PRO/1000 PT Dual Port Server Network Adapter Card EXPI9402PT - TWO Gigabit Ethernet Copper Server Connections in a Single PCI Express x4 Slot. Please note: Comes with High-Profile Bracket only. P/N: EXPI9402PT KEY FEATURES: - Intel 82571GB Gigabit Controller: Enables two Gigabit connections in a single adapter, delivering increased bandwidth for slot-constrained servers and providing high performance, reliability, and low power use in a single, integrated, dual port PCI Express Gigabit Ethernet controller chip. - Load balancing on multiple CPUs: Increases performance on multi-processor systems by efficiently balancing network loads across CPU cores when used with Receive-Side Scaling from Microsoft or Scalable I/O on Linux. - Interrupt moderation: Delivers increased performance while significantly reducing CPU utilization. - Compatible with x4, x8, and x16 full-height PCI Express slots: Allows dual-port operation in almost any PCI Express server slot, except x1 slots, and allows each port to operate without interfering with the other. - Support for most network operating systems (NOS): Enables widespread deployment. - Remote management support: Reduces support costs with remote management based on industry-wide standards. - Category-5 unshielded twisted pair (UTP), 4-pair cabling: Uses existing 4-pair cabling and saves re-wiring costs. - RoHS compliant, lead-free technology. - Intel PROSet Utility for Microsoft Device Manager: Provides point-and-click power over individual adapters, advanced adapter features, connection teaming, and virtual local area network (VLAN) configuration. - Advanced cable diagnostics: Dynamically tests and reports network problems (error rate, cable length) and automatically compensates for cable issues (cross-over cable, wrong pin-out/polarity). SPECIFICATIONS: General: Product code: EXPI9402PT4 Connectors: Two RJ-45 IEEE standards/network topology: 10BASE-T, 100BASE-TX, 1000BASE-T Wiring: Category-5, unshielded twisted pair (UTP), 4-pair Adapter Product Features: Intel PROSet Utility and Intel PRO Intelligent Install for easy installation: Yes Intel lead-free technology: Yes Plug and play specification support: Standard Auto-negotiation, full-duplex capable: Yes Integrated media access control (MAC) and physical layer (PHY): Yes Includes a full-height bracket: Yes Cable distance: 100 m in Category-5 for 100/1000 Mbps; and Category-3 for 10 Mbps Network Management: Wired for Management (WfM) baseline v2.0 enabled for servers: Yes DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP-manageable SMBus support: Yes Remote Installation Services (RIS): Yes Diagnostics (loopback, testability, PHY register access): Yes Advanced configuration and power interface (ACPI) 1.0 power management: Yes Wake on LAN support over PCI Express: Yes PXE 2.0 enabled through boot read-only memory (ROM): Yes Network Operating Systems (NOS) Software Support: Microsoft Windows, Linux (non-exhaustive list). Advanced Software Features: Adapter fault tolerance (AFT): Yes Switch fault tolerance (SFT): Yes Adaptive load balancing (ALB): Yes Fast EtherChannel (FEC): Yes Gigabit EtherChannel (GEC): Yes Teaming support: Scales up to 8 connections Multiple teams: Supports 4 separate teams, maximum IEEE 802.3ad (link aggregation control protocol): Yes Test switch configuration: Tested with major switch original equipment manufacturers (OEMs) PCIe Hot Plug/Active peripheral component interconnect (PCI): Yes IEEE 802.1Q VLANs: Yes IEEE 802.3 (z, ab, u, x) flow control support: Yes TCP checksum offload — transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP): Yes IEEE 802.1p: Yes TCP segmentation/large send offload: Yes Interrupt moderation: Yes Technical Features: Data rate(s) supported per port: 10, 100, and 1000 Mbps Bus type: PCI Express 1.0a Bus width: x4 lane PCI Express, operable in x4, x8, x16 slots En savoir plus Collaboration commerciale.