Digital pid

Bamof BE-2607 démodulateur satellite HD HD SD Sat Receiver with Scart and HDMI connector • Store a maximum of 4000 programs • Simple menu for fast, efficient use • Multilingual on-screen menu  • Compatible with multilingual programs  • Subtitles / Teletext • DiSEqC 1.0 / 1.1 / 1.2 & USALS  • OSD True Color  • Display channel information: EPG electronic programs of the TV • Expand settings PID  • Expand satellites with signal display for easy installation of the antenna  • Search satellites and add channels • Function to search a large number of satellites (automatically enters the frequencies found in the network search) • Edit the channel list • Edit the favorites list • Different image formats (4: 3 and 16: 9)  • Backup in case of a power failure • 1 USB connection • 1 HDMI connection  • 1 Scart connection • Software and channel information updated via USB stick  • Save the channels on the USB stick (not included) • Multimedia: Save picture (jpeg), music (mp4) and video (mkv) on the USB stick • Data storage: 512Gbit  • Flash ROM: 16 Mbits  • Processor speed: 400 MHz  • LNB input frequency: 950 MHz-2150 MHz  • Diseqc control: 1.0 / 1.1 / 1.2 and USALS • LNB power plug: 13/18 V  • LNB tone: 22 kHz  • Receiver onde: QPSK / 8PSK  • Symbol   rate   : 1.5 ~ 45 Mbps  • MPEG broadcast system: MPEG-4 / AVC, MPEG-2 MP @ ML, MP @ HL  • Video system: 720 x 576 (PAL), 720 x 480 (NTSC), 720p, 1080i, 1080p, 480i, 480p, 576i, 576p  • Audio output: MPEG -1/2/3  • Mode audio: simple channel / double channel / stereo  • LNB tuner connection: Type F, IEC 169 -24 Female • TV Scart: YES • RCA connector: NO  • HDMI connection: YES • USB connection: YES • PVR: YES • Time Shifting: YES • Card reader: NO

Hello, I am selling my Gimball, only used a couple of times for sport videos recording. Will come in the original box and the invoice. Details below: ACR The Plus is a device capable of stabilising small digital cameras and DSLRs. The stabilisers job is to make sure that the horison level is perfectly kept where it should be even during the most insane shot – it also negates unwanted round movements of the camera. An agile operator experienced in working with Steadicam or similar systems can achieve results not possible before. The versatility of this technology is limited solely by the creativity of users and the gear itself is very easy to configure. Handing over The Plus during a single, continuous shot, changing the shooting action from handheld to UAV, working in normal and inverted modes – these tasks require only a moment of preparation and open completely new horizones to open-minded filmmakers. Give it a try! The stabiliser Thanks to using a twin gyro & accelerometer system the stabilisation itself is sharp and precise while keeping the device simple to use. A powerful processor allowed us to enhance the primal functionality of the stabiliser with a set of new functions: more natural, iconic Follow Mode, larger number of saveable settings profiles, more reliable operation in demanding conditions. Three direct drive brushless motors were created to perfectly control the camera on each of the stabilised axes. The stabiliser was built according to our own solutions and technology. We used the best available materials – aircraft grade duraluminum, carbon fibres. The electronics and motors were developed from scratch to meet the requirements of our most demanding users.   The device Is powered by a single LiIon battery (included in the set) fitted inside a dedicated compartment within the carbon tube. Depending on your gear configuration it can work constantly up to two hours on a single charge. The battery charger is also included. A uniqe feature is the possibility to power up external accessories attached close to your camera straight from the main battery thanks to an auxillary power socket located at the camera shelf. Such accessories include wireless video transmission systems, follow focus systems, etc. ACR The Plus is the upgraded version of the classic BeSteady ONE – the gimble which started our journey. The first units of the predcessor were delivered to the first users around the end of 2013. We would not have made it without the support of hundreds of wonderful people who supported us via the initial KickStarter campaign. Thanks to the invaluable help from many enthusiasts we were able to revaluate, test and complete the upgrade project with success.    The heart of the BeSteady is within the mainboard. Highly modified BaseCam software, developed in direct cooperation with Alexei Moskalenko, enabled us to create a product tailored for your needs. A fast Cortex processor, vast internal memory and twin gyro & accelerometer system allows the device to easily cope with tasks such as fast running, shooting from moving vehicles and working at uncommon and extreme angles and positions. The lack of complicated configuration procedures (the so-called PID tuning) is gone with the introduction of simple, understandable sliders responsible for setting the needed parameters for every axis. The uniqe, very characteristic handheld mode, the Follow Mode, allows the operator to catch smooth scenes during continuous takes thanks to responsive and natural movement control system with a lot of precise math behind it. Moreover, the device can be controled using a dedicated analog Thumbstick or an external remote control device. The stabiliser can work in different modes thanks to the implementation of advanced control & stabilisation algorythms. The basic mode of operation is the Xtended Stabilisation – where the device maintains the exact camera position targ