Drawer unit with
Liste des meilleures ventes drawer unit with
Paris (Paris)
Description A clean look that’s easy to like and mix with other styles. This high unit gives you 9 drawers for storage without taking up more floor space than a low unit – a great solution for smaller workspaces. best off it was 100 GBP
49 €
Voir le product
France (Toutes les villes)
Superbe appareil photo reflex pour film 35mm, format 24x36 CANON F1 Old équipé de son dos Canon film Chamber 250 pour exposer 250 vues, d'un objectif FL 50mm f:1.8 et de son motor drive Unit avec son alimentation. - Boitier en très bel état, de très très faibles traces d'utilisation. La cellule fonctionne (livrée sans pile), toutes les vitesses fonctionnent. Le retardateur fonctionne. - Objectif Canon FL 50mm f:1,8 en bon état. Pas de rayure, pas de traces de nettoyage. Les bagues de mise au point et diaphragme sont souple et fonctionnent parfaitement. - le dos canon pour 250 vues est en bel état (il manque un bouton qui se visse sous l'une des bobines, ce qui n'empêche pas la bonne marche de l'ensemble), ainsi que le motor drive unit qui fonctionne, voir la vidéo en copiant le lien suivant: https://youtu.be/mEd3Npg6iYE - 2 chargeurs pour 250 vues inclus avec le dos - Bobineuse Canon en bel état. Manque un bouton au dessus du compteur. Le petit trépied visible sur les photos n'est pas inclus dans la vente Matériel non testé avec un film et vendu pour collection. Tout ce qui est dans ce set est visible sur les photos, aucun autre accessoire de disponible. PAS DE VENTE SEPAREE. Expédition pour la France: 35 euro AVEC assurance pour 1000 euro, Livraison par Mondial Relay SANS assurance: 12 euro Remise en main propre possible au marché aux Puces de Saint Ouen les lundi sur rendez vous. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Superb reflex camera for 35mm film, 24x36 format CANON F1 Old equipped with its Canon film back Chamber 250 to expose 250 frames, an FL 50mm f:1.8 lens and its motor drive Unit with its power supply. - The camera body is in very good condition, with very slight signs of use. The light meter works (delivered without battery), all speeds work. Self-timer works. - Canon FL 50mm f:1.8 lens in good condition. No scratches, no traces of cleaning. Focus and aperture rings are soft and work perfectly. - The Canon back for 250 frames is in good condition (a button that screws into the underside of one of the coils is missing, but this does not prevent the unit from working properly), as is the motor drive unit, which works. See the video by copying the following link: https://youtu.be/mEd3Npg6iYE - 2 chargers for 250 frames included with the back - Canon winder in good condition. Missing a button above the counter. The small tripod shown in the photos is not included in the sale. Equipment not tested with film and sold as a collector's item. Everything in this set is shown in the photos, no other accessories available. NO SEPARATE SALE. Shipping for China or U.S.A is 90 euro WITH 1000 euro insured with post office. Shipping for UE with post office is 42 euro WITH insurance for 1000 euro. Shipping cost with mondial relay for WITHOUT insurance for Belgium, Luxemburg, Nederland, Portugal, Spain, Germany, Italia and Austria: 22 euro En savoir plus Collaboration commerciale.
Voir le product
Lalley (Isère)
Unité Aérienne avec camera FPV: DJI Ocusync Air Unit. Conçu pour être compatible avec le casque FPV DJI Goggle Racing Edition. Unité ayant très peu servit (quelques vols seulement, sans crash), vendu avec tout ses accessoires d'origines. L'unité à était testé avec un casque DJI Goggle Racing Edition avant emballage. Le seul défaut comme vous pouvez le voir sur les images c'est le cable SBUS qui à était coupé pour être soudé sur le FC du drone. Je vend aussi 2 casques DJI Goggle Racing Edition (consulter ma page d'objet mis en vente), envoyer moi un message pour avoir une offre pour l'achat de l'unité + le casque. DJI Ocusync Air Unit with FPV Camera. Design to be compatible with the DJI Goggle Racing Edition. The Air Unit has been used only in a couple of flight and didn't suffer any crash. Sold with all it's origin accessory. The unit has been tested with a DJI Goggle Racing Edition headset before packing. The only defect is the SBUS cable that has been cut as you can see in the picture, in order to be solder to the FC. I also sell 2 DJI Goggle Racing Edition (see the other object I'm selling on), you can send me a message to buy the Air Unit + the headset for a reduced price.
180 €
Voir le product
Saint Étienne (Loire)
Tranche de console Studer A963, bon état général (voir photos) Master unit with compressor-limiter Etat de fonctionnement non testé D'autres pièces STUDER disponibles dans mes autres objets en vente, me contacter si intéressé par l'achat de plusieurs objets
119 €
Voir le product
Strasbourg (Bas Rhin)
Description Bush DAB FM CD player stereo unit with remote control and box. In very good working order and condition (hardly used). Not needed due to upgrade, so need to sell... Near to Bridgwater train station.
90 €
Voir le product
France (Toutes les villes)
Unit is in excellent condition, close to new (see photos) and works perfectly. It comes with power lead and remote control. Shipping to EU.
95 €
Voir le product
Paris (Paris)
Tv unit and coffee table Good solid tv unit and coffee unit, both in good condition although need abit of tlc cos the doors and drawer have swelled (of of storing in garage) so don’t shut properly but nothing major.
85 €
Voir le product
Paris (Paris)
one (1) antique oval solid brass drawer pull 2 1/2" centers Description this is for one (1) antique, solid brass oval drawer pull in 2 1/2" centers the mounting bolts are 2 1/2" on center the back plate is about 3 1/8" X 1 5/8" overall has an unusual high raised center oval to the pull has a fancy cast bail to it comes with mounting bolts if you have any questions just ask 17.242
60 €
Voir le product
Nanterre (Hauts de Seine)
BEYERDYNAMIC MCS 50/32 DISCUSSION CONTROL UNIT. BON ETAT GENERAL GOOD GENERAL CONDITION MCS 50 is a fairly mature discussion control unit, it has to support 32 or 64 microphone units. The microphone units are connected according to the single cable principle i.e. the first microphone unit is connected to the discussion control unit, the second microphone unit is connected to the first one and so on. The desktop housing is suitable 19" rack mounting (2 HU). The system configuration is done with two multifunction buttons or with the MCS Editor software via PC. There is also an RS 232 interface available for the control via PC. Features: • Multifunction display for indication and configuration • Multifunction buttons for menu control and system configuration without PC • Master reset button to load default settings • Service RS 232 interface port on the front for PC system configuration • Supplied with “MCS-Editor” configuration software • All inputs and outputs are plug-in type • RS 232 connection for external operation via PC or media control system • Control unit in a 2 U-housing, suitable for 19" rack mounting • MCS Controller Software for Windows® operating systems available as an option. SHIPPING POSSIBLE TO FRANCE, BELGIUM, UK, SPAIN, PORTUGAL, ITALY, LUXEMBOURG, NETHERLANDS, AUSTRIA. OTHER COUNTRIES ASK FOR SHIPPING COSTS.
200 €
Voir le product
France (Toutes les villes)
TB® UK Plug Duckhead Power Adapter with FUSE For All MacBooks USB-C Power Adapters, MagSafe and MagSafe 2 Power Adapters 10W 12W Replacement UK 3 Pin AC Power Adapter PROVENANCE: FR AN CE TB® UK Plug Duckhead Power Adapter with FUSE For All MacBooks USB-C Power Adapters, MagSafe and MagSafe 2 Power Adapters 10W 12W Replacement UK 3 Pin AC Power Adapter ***ATTENT!ON !!!: LE SEUL PRODUIT 100% ORIGINAL *** TB® UK Plug Duckhead Power Adapter with FUSE For All MacBooks USB-C Power Adapters, MagSafe and MagSafe 2 Power Adapters 10W 12W Replacement UK 3 Pin AC Power Adapter ORIGINAL & ÉTAT NEUF - TB® UK Plug Duckhead Power Adapter with FUSE For All MacBooks USB-C Power Adapters, MagSafe and MagSafe 2 Power Adapters 10W 12W Replacement UK 3 Pin AC Power Adapter... TB® UK Plug Duckhead Power Adapter with FUSE For All MacBooks USB-C Power Adapters, MagSafe and MagSafe 2 Power Adapters 10W 12W Replacement UK 3 Pin AC Power Adapter ***LIVRAISON EXPRESS - ULTRA RAPIDE*** TB® UK Plug Duckhead Power Adapter with FUSE For All MacBooks USB-C Power Adapters, MagSafe and MagSafe 2 Power Adapters 10W 12W Replacement UK 3 Pin AC Power Adapter • • • • TB® UK Plug Duckhead Power Adapter with FUSE For All MacBooks USB-C Power Adapters, MagSafe and MagSafe 2 Power Adapters 10W 12W Replacement UK 3 Pin AC Power Adapter Vendeur: Français Qualité: 100% Original et Authentique Livraison: Express État: Neuf TB® UK Plug Duckhead Power Adapter with FUSE For All MacBooks USB-C Power Adapters, MagSafe and MagSafe 2 Power Adapters 10W 12W Replacement UK 3 Pin AC Power Adapter Couleur: Prise britannique. GREAT REPLACEMENT FOR YOUR BROKEN ADAPTER!! This AC wall adapter plug keeps you from buying a completely new unit, just swap the old broken adapter, your power adapter can works well as before. COMPLY WITH UK STANDARD WALL OUTLETS!! Compatible with all U.K. plug mac products, i-Phone, i-Pod or i-Book power adapters. Perfectly replace UK, EU or US plugs, do a great job in your travelling. HIGH PREMIUM QUALITY | WITH FUSE | Not cheap Like others. COMPATIBLE WITH | USB-C Power Adapters, MagSafe and MagSafe 2 Power Adapters, 10W and 12W USB Power Adapters, and Portable Power Adapters. A Decent AC Wall Adapter Plug Replacement | No need to buy a new unit, this AC plug can easily replace your old one saving you money on your charger! Our Adaptor works with i-Pod, i-Phone, i-Pad, and Mac notebooks. NOTE: The AC plug only work with UK sockets! You can indeed use this adapter on a charger you purchases outside the UK! Package Included: 1 x UK AC Wall Plug Duck Head Adapter loose in Plastic PE Bag High Quality Replacement UK 3 PIN Plug CE MARKED | Comes with FUSE Inside Comes with One Year Warranty if sold by laptop-parts2go Compatible with all U.K. plug mac products, i-Phone, i-Pod or i-Book power adapters. Perfectly replace UK, EU or US plugs, do a great job in your travelling. Its Compatible with USB-C Power Adapters, MagSafe and MagSafe 2 Power Adapters, 10W and 12W USB Power Adapters, and Portable Power Adapters. TB® UK Plug Duckhead Power Adapter with FUSE For All MacBooks USB-C Power Adapters, MagSafe and MagSafe 2 Power Adapters 10W 12W Replacement UK 3 Pin AC Power Adapter
21,97 €
Voir le product
France (Toutes les villes)
Yongnuo YN568EX II is a powerful unit compatible with Canon cameras that have E-TTL / E-TTL II control. It features a guide number of 58m at ISO 100 and 105mm for illuminating your subject along with a zoom head with coverage from 24-105mm. Also, the flash can tilt from -7 to 90° and rotates 270° for versatility in bouncing your light. Newly released Yongnuo Flash Speedlite YN-568EX II version is a flash similar to YN-565EX in terms of features, plus some huge upgrades on the new YN-568EX II making it a much more capable tool for digital flash photography, both in the camera hot shoe and in wireless mode. This unit is capable of wireless master/slave TTL functionality when used with other flashes. The YN-568EX II is portable by running on 4 AA batteries and it can recycle in approximately 3 seconds. Other features packed into this flash include 2nd-curtain sync, HSS and a multi-mode. Additionally, it has a PC sync port for remote triggering and comes with stand. Features - Yongnuo YN568EX II supports High-Speed Synchronization – YN568EX II is the first speedlite which supports high-speed synchronization; with high-speed sync (FP flash), the YN568EX II can synchronize with all shutter speeds. The maximum shutter synchronization speed is up to 1/8000. - Compatible with Nikon and Canon wireless flash system – One YN568EX II is able to respectively accept internal flashing of YN568EX II, 580EX II, SB-910/900/800/700, 7D/60D/600D, Canon commander of Nikon’s built-in flashing and ST-E2 wireless signal, achieves off camera TTL and manual flashing. Some functions such as wireless TTL flashing, grouping light ratio TTL flashing and the illumination of remote controlled flashing can be easily achieved only if you carry a camera with built-in flash commander and YN568EX II. - High Guide Number TTL + High Speed Sync – GN58@ ISO100, 105mm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. - Multiple triggering mode supported – The YN568EX II can be triggered by the camera set-top, built-in or main-controlled flashing command, S1 and S2 (pre-flash-canceled mode). - Supports auto/manual zooming – The covered focal length can be changed between auto, 24~105mm on the lamp adapter by operating the zoom button on the flash light, supporting full-frame/APS-C cameras. - Comprehensively supports TTL functions – The YN568EX II supports HSS, FEC, FEB, Rear-curtain sync (2nd curtain sync), FE lock, Modeling Light, Canon camera menu accessible - Extreme speed of charging recycle – The time for full power output current-return takes just 3 seconds; you can get fast current-return experience even without brand-new batteries, which takes just 4~5 seconds. - Equipped with 2.5mm PC Synchronisation interface – It makes things easier on lightening the flashlight synchronously by using PC synchronisation port. - Sound prompting system – When the sound prompting system is enabled, the different sound alerts will prompt different working conditions of the flashlight allowing you to focus on shooting. - Aperture preview – Press the camera’s aperture preview button, the YN568EX II will send out continuous flash lasting one second for subjects imaging. - Advanced options function – The YN568EX II has advanced options setting function, where you can self-define the functions of the flashlight to suit your own requirements. - Automatic saving settings – YN568EX II can automatically save your current operating settings to convenient your next use. - LCD display interface, decent appearance - Metal hot-shoe stand, solid and reliable Specifications High-speed SyncThe max. sync speed is 1/8000sGuide No.58 meters (ISO 100, 105mm)Flash modeHigh-speed Sync HSS,TTL, M, MULTIWireless triggerN’s b'&' C’s wireless system, S1, S2 pre-flash-canceled modeWireless triggering distance20~25m indoor, 10~15m outdoorSlave groups3(A, B, and C)Channels4Zoom range24,28,35,50,70,80,105mmVertical rotation angle-7~90 degreesHorizontal rotation angle En savoir plus Collaboration commerciale.
Voir le product
Aix les Bains (Savoie)
8 legendary Class A mic preamps in the same class as the Focusrite ISA and RED ranges. They don't make them like this anymore... This unit is in very good condition - see pictures: front face is pristine with no scratches, only a few usage scratches around the rack ears from installation (marks will be hidden again after mounted onto a rack). It never left the studio. The Octopre provides eight pristine discrete channels of Focusrite Class A mic preamp and compression, OctoPre PLATINUM routes directly to any digital audio workstation via eight standard analogue outputs. Each channel features a revolutionary compressor/limiter circuit, providing a warm-sounding compressor, which morphs into a brick wall limiter to avoid those critical overs, ensuring total control over all eight channels. The mic preamps featured in OctoPre PLATINUM are similar to those featured in the award winning Focusrite Top-Of-The-Range. They are a transistor-based Class A design utilising the same full-bandwidth philosophy as the legendary RED and ISA mic preamps, ensuring detail and clarity without colouration. The first two 'super channels' also feature phase reverse, as well as TRS jack inputs on the front fascia for quick and easy, DI-free instrument plug-in. Eight line level balanced (+4 dBu) analogue inputs and outputs are provided as standard via 25-pin D-type connectors. These D-type connectors may be routed to 8 XLR/TRS by means of an (optional) 8-way 25-pin D-type to 8 XLR/TRS breakout cable, available separately. In addition to the analogue outputs, the OctoPre can be fitted with digital output (OPTIONAL CARD). Detailed description from the focusrite website: The OctoPre is an eight channel Class A microphone preamplifier, featuring a classic Focusrite mic pre and a revolutionary compressor/limiter circuit on each channel. The mic pres featured in the OctoPre are similar to those featured elsewhere in the award winning Focusrite Platinum range. They are a transistor-based Class A design utilising the same full bandwidth philosophy as the legendary Focusrite Red and ISA mic pres, ensuring detail and organic clarity without obvious colouration. The revolutionary compressor/limiter circuit provides each channel with warmsounding compression, which morphs into brick wall limiting to avoid critical ‘overs’ when recording digitally. The first two channels also feature phase reverse, as well as unbalanced 1/4” jack inputs on the front fascia for quick and easy, DI-free plug-in of guitars and basses. With Class A Focusrite analogue signal processing and comprehensive A/D interface options, OctoPre is the perfect partner for a Pro Tools™ system or any other digital audio workstation, making high quality, multi-channel recording easy. Equally, it could be utilised as part of a compact multi-channel location recording solution (with a laptop or ADAT™, for example), or as an additional set of professional-quality mic pres for any analogue or digital console or hard disk recorder. The original OctoPre is a typical Class A Platinum design, (based around a 737 Rhom transistor) and it is solid state, it has extended bandwidth (up to at least 180kHz at the top end) and sounds transparent. The original OctoPre has an edge in being more forgiving if you want to slam the pre's hard (but more 2nd order harmonic distortion as a result). -The Octopre has a dynamics (compressor/limiter) control on each channel -The Octopre has 48V phantom power switches on each channel -The Octopre has line in and out connections on 25 pin D-sub connectors and 8 XLR inputs for mics Performance specifications: THD:0.001% @ 20dBu input, mic and line at 0dB gain Noise:-96 dB at unity gain through the unit Mic EIN:-128 dBu @ 6dB of gain with 150Ω termination impedance Frequency response:-1 dB at 10 Hz to 200 kHz Carefully packed with powercord. Shipping France: 27,80 € Shipping Europe: 36,30 €
790 €
Voir le product
Nice (Alpes Maritimes)
Ophir Optics PD2-A Laser Power Monitor with Power Supply. Ophir Optics PD2-A Laser Power Monitor with Power Supply This used meter powers on with the included power supply. The internal rechargeable batteries are BAD and no longer work on their own. Unit powers on as shown in the photos. Please view our photo set and contact us with any questions. Condition: This used meter powers on with the included power supply. The internal rechargeable batteries are BAD and no longer work on their own. Unit powers on as shown in the photos. Please view our photo set and contact us with any questions. Specifications Condition:used Stock number:51 Category:Machine Tools equipment Subcategory:Lasers Subcategory 2:Scientific
300 €
Voir le product
Paris (Paris)
Flash Universel SUNPAK AUTO ZOOM 3600 Thyristor Strobe Unit - CANON/NIKON/PENTAX Description: Flash conçu à l'époque argentique de mise au point manuelle et fabriqué pour accompagner les reflex de l'époque. Je vous prie de vérifier la compatiblité de votre appareil avec le flash avant d’acheter. État mécanique: fonctionne parfaitement bien. État esthétique: Des traces d'utilisation sans aucun impact mécanique. Vendu avec un câble de connexion et un porte-filtre Je vous invite à consulter mes autres ventes Description: Flash unit for standard hotshoe analog SLR cameras (Nikon, Canon, Pentax, Olympus). Please check compatibility with your camera before bidding. Mecanical condition: perfectly functionning. Aesthetical condition: Good overall condition. Sold with a connection cable and a filter holder Nice bidding to everyone! _gsrx_vers_454 (GS 6.3 (454)) _gsrx_vers_457 (GS 6.3.2 (457)) _gsrx_vers_827 (GS 7.0.13 (827)) Bonjour, Je suis en vacances du 15 août au 1 septembre 2019. Tout objet acheté pendant cette période sera expédié à partir du 2 septembre 2019 Merci de votre compréhension Cordialement Hello I am on vacation from 15th of August to 1st of September 2019. Items purchased during this period will be dispatched on 2nd of September 2019. Thank you for your comprehension Best regards
59 €
Voir le product
Strasbourg (Bas Rhin)
REVOX B760 TUNER • BASIS BOARD VU-METER UNIT • STUDER/REVOX 1.166.375-11 • SPARE PART • PRINTED CIRCUIT BOARD ➜ Pour plus d’informations et liste complète des pièces détachées disponibles, consultez mon site web: https://mainatework.com/spare-parts-hi-fi/ ➜ Weitere Informationen und eine vollständige Liste der verfügbaren Ersatzteile, finden Sie unter meine Website: https://mainatework.com/spare-parts-hi-fi/ ➜ More informations and a complete list of available spare parts, visit my web site: https://mainatework.com/spare-parts-hi-fi/ A vendre un circuit imprimé (Basis Board VU-Meter Unit - Studer/Revox 1.166.375-11) pour tuner Revox B760 (Studer A176) Zu verkaufen eine Leiterplatte (Basis Board VU-Meter Unit - Studer/Revox 1.166.375-11) für B760 Revox-Tuner (Studer A176) For sale is a printed circuit board (Basis Board VU-Meter Unit - Studer/Revox 1.166.375-11) for Revox B760 tuner (Studer A176) Sans ampoules Ohne Birnen Without bulbs Fonctionnel. Piste réparée. Non révisé. Voir photos Voll funktionsfähig. Spur repariert. Ohne Überholung. Siehe Fotos Fully operational. Track repaired. Without revision. See pictures Occasion Normal gebrauchten Zustand Used Sans garantie ni retour Keine garantie oder Rückgabe Without warranty or return Expédition internationale Ich verschicke auch weltweit I ship worldwide Envoi groupé si plusieurs achats Kombiversand bei mehreren Artikeln Combined Shipping for several items Emballage soigné Sehr gute Verpackung Very good packing Consultez mes autres ventes Bitte beachten Sie meine anderen Artikel Check out my other sales Acheteurs étrangers. Attendre l'envoi de la facture. J'essaie de trouver le meilleur prix d'envoi. Auf die Rechnung warten, bevor zu bezahlen. Ich versuche, den besten Versandpreis zu finden. Wait for the invoice before paying. I try to find the best shipping price. --> Consultez mes autres ventes Frais de port: Afin d'éviter les pertes ou vols, tous les envois sont effectués avec numéro de suivi Um einen Verlust oder Diebstahl zu vermeiden, werden alle Sendungen mit Tracking-Nummer ausgeführt In order to avoid losses or theft, all shipments are made with tracking number Les taxes et droits de douane sont à la charge de l'acheteur. Die Steuern und Zollgebühren sind zu Lasten des Käufers. Taxes and customs duties are chargeable to the buyer --> Envoi groupé si plusieurs achats 1 • France métropolitaine, Belgique et Luxembourg Expédition par Mondial Relay, avec suivi, les tarifs sont moindres que ceux de Colissimo. Livraison en Point Relais par Mondial Relay. Le colis sera à retirer au point le plus proche de chez vous (ou selon votre choix, à préciser lors de votre commande). France, Belgique et Luxembourg Colis à retirer en Point Relais Prix 4,95 € 5,50 € 6,15 € 7,70 € 8,90 € 11,15 € 14,20 € 2 • Allemagne • Autriche • Belgique • Espagne • Italie • Luxembourg • Royaume-Uni • Portugal: Livraison à domicile par Mondial Relay Allemagne, Autriche, Belgique, Espagne, Italie, Luxembourg, United Kingdom, Portugal Home Delivery • Livraison à domicile Prix 10,20 € 10,20 € 10,20 € 16,40 € 21,50 € 26,70 € 3 • Deutschland: Ein Versand mit Hermes oder DHL Deutschland ist möglich. Eine Sendung/Woche Hermes Paketklasse (Registered • 25 kg max.) Hermes Preisliste (deutscher Versand) XS 6,00 € S 6,55 € M 7,85 € L 12,95 € DHL Paketklasse (Registered) DHL Preisliste (deutscher Versand) XS (6,00 € S (8,50 € M (10,50 € L (17,50 € 4 • Shipping rates for European Community: DHL Paketklasse(Registered) DHL Preisliste bis 0,5 kg 8,40 € bis 1 kg
9,94 €
Voir le product
-
Suivant →