Emw

EMW Electronic Music Worlds ECHO DELAY (eurorack module) - Eurorack (3U) form factor - 8 HP width - Delay Time control - 20 to 400ms. - Regeneration (REPETITION) control from one to infinity - Effect dosage control (DRY/EFFECT) - Two independent outputs - Power consumption:  +12V [26mA]  /  -12V [2mA] - Connectors: 3.5mm - Weight: 84g - Depth: 50mm

EMW Electronic Music Workss ECHO DELAY (eurorack module) - Eurorack (3U) form factor - 8 HP width - Delay Time control - 20 to 400ms. - Regeneration (REPETITION) control from one to infinity - Effect dosage control (DRY/EFFECT) - Two independent outputs - Power consumption:  +12V [26mA]  /  -12V [2mA] - Connectors: 3.5mm - Weight: 84g - Depth: 50mm

The EMW VCO 104 is a 100% analog voltage controlled oscillator with four waveforms: SQUARE, SAWTOOTH, TRIANGLE and SINE. Its transistorized core circuit produces very sharp and powerful analog waveforms. It has precise waveform generation, excellent stability with 1V/octave frequency tracking over five octaves. The VCO-104 from EMW is the ideal tool for a truly 'fat' analog sound generation. INFO - Eurorack (3U) form factor - 10 HP width - 4 waveforms transistor core voltage controlled oscillator - Very stable within 5 octaves - Pulse width control and modulation - Soft sync signal in and out - 1V./oct. and exponential frequency modulation inputs - Power consumption: +12V [28mA]  /  -12V [28mA] - Connectors: 3.5mm - Weight: 134g - Depth: 50mm Etat neuf, avec sa nappe d'alimentation.

The  EMW  VCF  DIODE  is a specially designed 18db/oct. diode array low-pass resonant filter.  It has a unique sound and a distinctive sonic character.  This module  has a  resonance level switch to better adapt to your patch,  input audio mixer with two channels with individual Input level control,  and two modulation inputs with individual input  level control. - Eurorack (3U) form factor - 10 HP width - 2-channel audio mixer with audio level controls - Two Modulation inputs with level control - Two output connectors - Low noise  circuit design - Power consumption: +12V [14mA]  /  -12V [14mA] - Connectors: 3.5mm - Weight 141g - Depth: 50mm

The Voltage Comparators module is used to trigger other modules as a function of a certain incoming voltage level. This module has four units, two of them producing a stable level output and the other two producing short trigger pulses. The outputs normally remain in zero volts (low) until the incoming voltage source reaches the adjusted level (0-10V.). When it happens the correspondent output goes high. The “LEVEL OUT” remain high while the incoming voltage keeps a level equal or greater than the adjusted voltage, while the “TRIG. OUT” produce a single trigger pulse under the same condition. - Eurorack (3U) form factor - 10 HP width - Power consumption:  +12V [42mA]  /  -12V [15mA] - Weight: 114g - Depth: 50mm

EURORACK EMW - Electronic Music Works STEREO ENHANCER En parfait état.

I am selling my modular system. There is everything you need to get to start with modular synths (2 oscillators with integrated enveloppes, 1 VCA, 1 filter, 1 effect, 1 mixer, 1 function, 1 stereo splitter-panner and 1 out) except a voltage generator like a sequencer. Thanks to the interface you will be able to sequence it via midi and so use it as a duophonic desktop synth. This is a 3U case of 84hp (PSU3 with one busboard of 22 plugs). The case is a mint condition Doepfer A-100LC3V (Black vintage case) There are 11 modules: - Erica Synths DUOPHONIC MIDI-CV INTERFACE - Noise Engineering BASIMILUS ITERITAS ALTER BLACK (Oscillator) - Doepfer A-145-1 LFO - Mutable Instruments PLAITS Macro Oscillator - Pittsburgh Modular LIFEFORMS BINARY FILTER - Make Noise FUNCTION mk2 (Enveloppe, LFO, S&H) - Xaoc Devices TALLIN (Dual VCA and overdrive) - Audio Damage ADM01 DUBJR (Digital delay) - Manhattan Analog MIX (3 channel mono mixer) - EMW STEREO ENHANCER (Stereoizer) - Doepfer A-139-2 (Headphones out / Stereo out) Every modules are already racked, they are in a really good condition, you will find some usual rack rashes on some of the modules. I still have the boxes for those ones: - Tallin - Midi-cv Interface - A-145-1 There are also: 25 cables from 5 to 90cm (various brands), 2 Tiptop Audio stackcables, 1 splitter. I also offer one midi cable and one insert cable in order to use the headphones out as a stereo out. Total price for buying all those products new is 1900 euros. You can send me an offer of 1400 and the system will be yours. If you buy it for 1600, this will include the Arturia KEYSTEP PRO from my other listing. Ask me anything, I can make some discount if you don't need some of the accessories, but please note that every modules should be bought together with the case.