Familiarity with internal

This is a headphone preamp for ribbon headphones and more specifically the Raal SR1a ribbon headphones. It sounds amazing, it sounded better than my Hypex ncore amplifier with the amp adaptor box.  i'm selling it since unfortunately I had to sell the headphones. It is still under warranty and in mint condition, very lightly used (10-15hours) in a mastering studio. The Schiit Jotunheim-R was bought new in march 2020 directly from Schiit. It's 230 volt european voltage, with internal multibit dac.  Sold with power cable and original invoice of purchase.  Jotunheim R is covered by a 5-year warranty covered by Schiit.

Hi, i'm selling a mint RAAL SR-1A ribbon headphone with all original accessories, cables and amp adaptor box, sold along a Schiit Jotunheim-R preamp with internal DAC. Both are included in the sale. They are both in mint condition and still under warranty, very lightly used (10-15hours) in a mastering studio. Raal SR1A was bought new Jan 2020 and Schiit Jotunheim-R was bought new in march 2020. The  Schiit Jotunheim-R is 230volt european voltage, with internal multibit dac. Value new was over 5300euros including import fees. They are located in my studio in Paris, France. I'll be happy to answer your questions.

ANGENIEUX   f 12 - 120 mm  1: 2.2 !                         Monture ARRIFLEX "S"                                  n° 1367641                     (traduction en français ci-dessous)   3 different mounts are easily and quickly adaptable to this lens  this thanks to specific adapters:                                                   - "MFT" 4/3 for BLACKMAGIC; LUMIX..                         - "C" for BOLEX / BEAULIEU cameras or other brands                                                                            - "NEX" for SONY Alpha So you can use this lens in film and digital !!                                                 These adapters allow you to keep all the focal length settings; focus distance and diaphragm! Only one adapter will be delivered with the set Please tell me when ordering which one you are interested in I would do the assembly in my workshop at no extra cost                                                 This "vintage" optic is in very good cosmetic & mechanical condition! Close to new! it has certainly been used very little! Take a look at the photos, they speak for themselves! The glasses are clear without scratches and mold (fungus) Internal review completed! (see information note below)    Information on internal lenses: The quality of "vintage" lenses deteriorates with age. (a bit like us...) Internal micro-dust is inherent in these objectives as well as some small cleaning scratches on the front glass. Faults which are generally not affecting the result photographic On the other hand, the presence of mold (fungus) on the glasses internal are detrimental! This is the real "cancer" of mineral glasses! After a while they become embedded in the glass and it is often very difficult to extract them! They gradually spread and completely degrade optical qualities! Molds are recognizable by this: - White filaments - "foggy" aspect - Deep opaque inlays These molds appear when lenses are stored in humid and polluted environments An external examination does not always make it possible to notice them! It is necessary to do an in-depth examination! An "endoscopic" examination! the only one that allows these defects (photo 11) To do so, use a "backlight" lamp The slightest defect becomes visible! you will be surprised at result! The next time you buy a lens ask the seller if such an examination was carried out! and its result It's a safe bet that this test was not carried out! This objective that I propose to you does not present these serious faults! The focus ring rotates very well the zoom control operates at regular and fluid way thanks to a disengageable crank, the diaphragm ring performs its function no problem Made of noble and robust materials (not plastic!..) Prestige optics from the famous French brand ANGENIEUX, market leader professional optics for over 75 years! It is a material of very high quality used in the cinematographic environment for decades Currently 85% of films shot in the world are shot with lenses ANGENIEUX! http://www.mediakwest.com/tournage/item/angenieux.html Exceptional optical qualities allow this optic to compete with best sets of fixed lenses at equivalent focal lengths.. Perfect homogeneity of colorimetry, contrast and resolution.. Intended for high-end film and digital cameras.. Constant diaphragm over the entire zoom stroke (no ramping), no pumping   Exceptional brightness See also the videos made with this lens on youtube, links below: https://www.youtube.com/watch?v=4EEmW-c4WBI https://www.youtube.com/watch?v=1jB_JpjCLGo&t=229s https://www.youtube.com/watch?v=hPz5dMAo_5w https://www.youtube.com/watch?v=FXxF27ogsgY

    iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:     Item Description Remarks Inputs/Outputs     Inputs (rear) USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in) Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible)   Intelligent SPDIF® Coaxial 3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM   SPDIF Optical         Outputs (rear) Audio RCA L+R     Intelligent SPDIF® Coaxial Up to 192kHz PCM       Output (right side) SmartPower® Socket Fast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A             Controls     Controls (front)     - HP Output Audio 6.3mm Headphone Jack   - Volume with Power On/Off switch Precision analogue volume control - 3.5mm Input   Auto disable the digital section when this is in use - X-Bass® On/Off   - 3D Holographic Sound® On/Off Auto-switching for Speakers® and Headphones® (two separate and distinct circuits)       Controls (left side)     - Power Mode Turbo, Normal, Eco Computer controlled power and gain scaling - Polarity Normal/Inverted   - Filter 3 positions, 6 filters (see filter section below)       Controls (bottom)     - Line Direct/Preamplifier Preamplifier function Enable/Disable, 0/9dB gain selectable Fixed 2V or variable with up to 5V available - iEMatch® Perfect-matching circuit for IEMs (eliminate hiss) Off / High Sensitivity Headphone / Ultra Sensitivity Headphone             DAC section     DAC Dual-core DSD, DXD, PCM DAC by Burr Brown 2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR   Bit-Perfect DSD processing, Bit-Perfect PCM processing         Clock Ultra low jitter GMT computer controlled Femto Clock RMS jitter 12kHz – 1MHz       Audio Formats DSD 512/256/128/64 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 All native decoding, no internal hardware conversion   DXD 2x/1x 768/705.6/384/352.8kHz All native decoding, no internal hardware conversion   PCM 768/705.6/384/352.8/192/176.4/96/88.2/ 48/44.1kHz All native decoding, no internal hardware conversion       Filters     - PCM Bit-Perfect Processing/Minimum Phase/Standard Digital filters selectable - DSD Extreme/Extended/Standard Range Analogue filters selectable - DXD Bit-Perfect Processing Fixed analogue filter             Specifications (DAC Section)     Dynamic Range (Line) >117db(A)   THD & N (0dBFS Line)   Output Voltage (Line) >2V   Output Impedance (Zout)   Jitter (correlated) Below AP2 test set limit               Headphone Power Output     HP Amp Output Power (max) Power (continuous.) - Turbo mode 10.0V/4,000 mW @ 16 Ohm >1560 mW @ 64 Ohm - Normal mode 5.5V/1,900 mW @ 16 Ohm >950 mW @ 32 Ohm - Eco mode 2.0V/500 mW @ 8 Ohm >250 mW @ 16 Ohm             Specifications (Headamp Section)     Dynamic Range (HP) >115dB(A) (Eco Mode, 2V Out)   THD &N (HP 500mW/16R)   Output Voltage (HP) >8V (Turbo Mode)   Output Impedance (Zout)   Maximum Output Power 4,000mW @ 16 Ohm Load when using sinewave testing the iDSD micro may engage protection circuits Continuous Output Power 1,000mW @ 64 Ohm Load  

Atomos S2H Specs Inputs1x 3G/HD/SD-SDI (supports embedded audio)Outputs1x HDMI (supports embedded audio) 1x 3G/HD/SD-SDI loop output (supports embedded audio)Firmware UpdatesVia USB portSupported Formats1080i60, 1080i59.94, 1080i50, 1080p30, 1080p25, 1080p24, 1080p23.98, 1080p30 (60i), 1080p25 (50i), 1080p24 (60i), 1080p23.98 (60i), 720p60, 720p59.94, 720p50, 480i, 576iProcessingPulldown Removal: 25PsF (50i) to 25p 30PsF (60i) to 30p 24p (as 3:2-60i) to 24p Pulldown Insertion: 25p to 25PsF (50i) 30p to 30PsF (60i) 24p to 24p (as 3:2-60i)Battery LifeInternal battery: up to 2 hours Included 7.4 V 2600 mAh battery: up to 12 hours Optional 7.4 V 5200 mAh battery: up to 22 hours Optional 7.4 V 7800 mAh battery: up to 32 hours Key Features - Converts SDI Input to HDMI Output - SDI Loop Output - Supports Resolutions Up to 1080i60/50 - 1-Hour Internal Battery - 10-Hour External Battery Included - Stackable with Additional Units - Performs 3:2 / 2:2 Pulldown Removal - Test Pattern Generator / Audio Test Tone - Perfect Fit with Atomos Recorders - Fits Any Device with NP-Series Plate The Atomos Connect S2H Converter with 2600mAh Battery converts an SDI input to an HDMI output and SDI loop output in resolutions up to 1080i60/50. Connect S2H is battery-powered -- it features an internal one-hour battery and comes with a 10-hour external NP-series battery. It also supports higher capacity 7.4V NP-series batteries for up to 32 hours of power. Multiple Connect S2H and Connect H2S units can be vertically stacked together and powered by one battery attached to the topmost unit. Connects are designed for a perfect fit with Atomos Recorders but can fit any device that has a NP-series battery plate. An AC power supply is included for charging the internal battery and can charge up to three Connect units simultaneously. In addition to conversions, Connect S2H also performs 3:2 / 2:2 pulldown removal and includes a test pattern generator and audio test tone. In the Box - Atomos Connect S2H Converter with 2600mAh Battery - 2600mAH Battery for Atomos Monitors/Recorders and Converters - AC Power Supply for Charging Battery

For sale this S6000 in very good condition + 9GB internal SCSI hard disk + extra I could consider shipping to other locations than the ones listed, please do not hesitate to ask and I will revert. If interested in additional items such as USB board, Adat board or SCSI2SD V6 board just let me know so that we can discuss an offer. S6000 bought back in 1999 and progressively expanded over years.  Not needed anymore but I'm sure it will make a new owner very happy. I won't enter into details on this great sampler. If you are reading you probably know how great it is. List of items included in the sale (more details below on different items listed): - Akai S6000 in very good condition, OS V2.14, 128 voices, 256 MB RAM, 16 individual analog outputs - !! NO EB-20 FX board installed !! - Original rack-mounting "ears" - SCSI CD-ROM reader in external case + power supply - SCSI cable, SCSI terminator and power cables - French manual for OS V1.00 - English manual for OS V1.00 - Original 4-floppy disk set - Compaq very high quality Qwerty keyboard for direct edition of samples/programs... names - 10m serial extender for remote display (to avoid noise from main unit) - Internal 9GB SCSI 3.5" hard drive - 6 original samples CD-ROMs (please see pictures) Please see details and condition of main items below S6000 Sampler: - Very good condition, very light use, non smoking studio - Factory protective plastic film still in place but peeling off a bit due to age. You can of course remove it if you want. - The recessed plastic part behind the front detachable LCD panel is a bit yellowish due to age and daylight - Missing black rear lids to cover the slots for the USB and Adat boards (please see pictures). I still have the screws though and will provide them. - Slight scratches on top side of front plate (please see picture) - Screw marks on rack mounting "ears" (please see pictures) - Left clip retaining the front detachable LCD panel has been damaged by first owner but glued back (please see picture). It's any way useless since the front detachable LCD panel can be more solidly attached thanks to the 2 chrome "thumb screws" - The front detachable LCD panel is almost like new and the LCD works great, provided with 10m serial extender for remote display (to avoid noise from main unit) - OS V2.14 - 128 voices - 256 MB RAM installed - 16 individual analog outputs - !! NO EB-20 FX board installed !! - Original manual for OS V1.00 included - Original rack-mounting "ears" included - Floppy disk drive tested, ok - All outputs tested, ok - Inputs tested, ok - Main volume knob and phones knob tested, ok - Original 4-floppy disk set - Compaq very high quality Qwerty keyboard for direct edition of samples/programs... names, good condition - Internal 9GB SCSI 3.5" hard drive - 6 original samples CD-ROMs (please see pictures) - Power cable included SCSI CD-ROM reader - Used - Very good condition considering its age - Can read included CD-ROMs or any other Akai-format CD-ROM  - In external case with power supply - Power cable included - SCSI cable included - SCSI Terminator included

Ophir Optics PD2-A Laser Power Monitor with Power Supply. Ophir Optics PD2-A Laser Power Monitor with Power Supply This used meter powers on with the included power supply. The internal rechargeable batteries are BAD and no longer work on their own. Unit powers on as shown in the photos. Please view our photo set and contact us with any questions. Condition: This used meter powers on with the included power supply. The internal rechargeable batteries are BAD and no longer work on their own. Unit powers on as shown in the photos. Please view our photo set and contact us with any questions. Specifications Condition:used Stock number:51 Category:Machine Tools equipment Subcategory:Lasers Subcategory 2:Scientific

BOLEX Underwater Housing with camera BOLEX "M" + KERN f= 10 mm                  Vintage  (1955)                              (traduction en français ci-dessous) Underwater housing designed to film underwater at great depths Made in a very thick metal It easily withstands the strongest pressures up to 100 meters deep (330 feets) Very easy to use: fitting and removing the camera is do in a few moments, without the aid of any tools! Plus the internal design with compartments. Makes it only weigh in water just enough to keep perfect stability. And gives the diver complete freedom of movement This copy is in exceptional cosmetic condition It is close to new! Watch the use and maintenance tutorial I made on Youtube: https://www.youtube.com/watch?v=FK9_A_fCMCk (this link is not active from this site, please copy it to your "search bar" to access it) This is a complete set including the box and its accessories but also a camera and its lens specially designed for this one! List of delivered material: - BOLEX n ° 229 underwater box with external controls - Iconometric viewfinder - Contrast filter - Camera mounting sole - Diaphragm control ring (KERN f = 10 mm) - Camera winding gear - Wrenches for seals - Sturdy wooden crate - H16 BOLEX camera M series n ° 203146 - KERN lens f = 10 mm 1: 1.6 n ° 545863 - User manual (in French; Description on Youtube ) You can immediately use and film in 16 mm. This material is functional  and usable.! It's not just for decoration !... ** Please note that most rare BOLEX submarine housings offered for sale on this site. Are never equipped with this camera and this wide angle lens specially adapted for shooting aquatic! ***  Personally I offer you the whole complete !! *** This camera has been used very little. The controls have very rare marks of use Look carefully at the photos to convince yourself The drive motor rotates freely without problem. The KERN lens is healthy and cosmetically very good The lenses are clear and the adjustment rings work great The Swiss Company KERN was renowned for manufacturing the best 16mm cinema lenses! The BOLEX M camera can also be used outside the housing! Because the octometer sight and the winding lever of the original engine will also be delivered The weight of the whole is quite high over 25 Kg! Which explains the shipping rate! him too high! But you will agree that I am not responsible for the exorbitant prices charged by postal services..!.. §§§ Foreign bidders residing outside the European Union. or in the French Overseas Territories Shipping is possible worldwide. But please contact me before bidding or buying so that I will communicate the cost of the shipment. Otherwise a billing supplement will be applied! The price varies considerably from one region to another §§§§ Of course, customs taxes and any import costs are at the expense of the buyer. Please check with the authorities of your country  §§§ Ensemble complet de prise de vues sous- marine BOLEX                                   avec      camera BOLEX "M" + objectif KERN f= 10 mm                                   Vintage (1955 ~) Caisson sous - marin conçu pour filmer sous l'eau à grande profondeur  Réalisé dans un métal de forte épaisseur  Il résiste sans peine aux pressions les plus intenses jusqu'à 100  mètres de profondeur  (330 feets) D'un maniement très facile : la mise en place et le retrait de la caméra se  font en quelques instants, sans l 'aide d'aucun outil ! De plus la conception interne avec compartiments. Fait qu'il ne pèse dans l 'eau que juste ce qu'il faut pour garder  une stabilité parfaite. Laissant au plongeur une entière

BOLEX Underwater Housing with camera BOLEX "M" + KERN f= 10 mm                                         Vintage  (1955)                              (traduction en français ci-dessous) Underwater housing designed to film underwater at great depths Made in a very thick metal It easily withstands the strongest pressures up to 100 meters deep (330 feets) Very easy to use: fitting and removing the camera is do in a few moments, without the aid of any tools! Plus the internal design with compartments. Makes it only weigh in water just enough to keep perfect stability. And gives the diver complete freedom of movement This copy has been completely renovated and adjusted! It is like new! Watch the use and maintenance tutorial I made on Youtube: https://www.youtube.com/watch?v=FK9_A_fCMCk (this link is not active from this site, please copy it to your "search bar" to access it) This is a complete set including the box and its accessories but also a camera and its lens specially designed for this one! List of delivered material: - BOLEX n ° 229 underwater box with external controls - Iconometric viewfinder - Contrast filter - Camera mounting sole - Diaphragm control ring (KERN f = 10 mm) - Camera winding gear - Wrenches for seals - Sturdy wooden crate - H16 BOLEX camera M series n ° 203146 - KERN lens f = 10 mm 1: 1.6 n ° 545863 - User manual (in French; Description on Youtube ) You can immediately use and film in 16 mm. This material is functional  and usable.! It's not just for decoration !... ** Please note that most rare BOLEX submarine housings offered for sale on this site. Are never equipped with this camera and this wide angle lens specially adapted for shooting aquatic! ***  Personally I offer you the whole complete !! *** This camera has been used very little. The controls have very rare marks of use Look carefully at the photos to convince yourself The drive motor rotates freely without problem. The KERN lens is healthy and cosmetically very good The lenses are clear and the adjustment rings work great The Swiss Company KERN was renowned for manufacturing the best 16mm cinema lenses! The BOLEX M camera can also be used outside the housing! Because the octometer sight and the winding lever of the original engine will also be delivered The weight of the whole is quite high over 25 Kg! Which explains the shipping rate! him too high! But you will agree that I am not responsible for the exorbitant prices charged by postal services..!.. §§§ Foreign bidders residing outside the European Union. or in the French Overseas Territories Shipping is possible worldwide. But please contact me before you bid to have me communicate the price of the shipment. The price varies considerably from one region to another §§§§ Ensemble  de prise de vues sous- marine BOLEX                                    Vintage (1955 ~) Caisson sous - marin conçu pour filmer sous l'eau à grande profondeur  Réalisé dans un métal de forte épaisseur  Il résiste sans peine aux pressions les plus intenses jusqu'à 100  mètres de profondeur  (330 feets) D'un maniement très facile : la mise en place et le retrait de la caméra se  font en quelques instants, sans l 'aide d'aucun outil ! De plus la conception interne avec compartiments. Fait qu'il ne pèse dans l 'eau que juste ce qu'il faut pour garder  une stabilité parfaite. Et laisse au plongeur une entière liberté de mouvements  Cet exemplaire a été entièrement rénové et réglé ! Il est comme neuf ! Regardez le tutoriel d'utilisation et d'entretien que j'ai réalisé sur Youtube: https://www.youtube.com/watch?v=FK9_A_fCMCk (ce lien n 'est pas actif à partir de ce si

Akai Mpc60 Mk2 Mkii Roger Linn With Scsi Full Ram Os 3.10. État: "Occasion" Fully working akai mpc60 mk2 great piece of equipement 110v comes with transformer for 220v use Great collector item comes with upgrades installed full options is 3.10, Marion SCSI kit internal Zip drive, full ram. Works great very clean unit

Pentacon Super TL3 35mm film camera body with Pentacon 50mm f1,8 lens, strap and front cap. Sold for parts or repair as it is not tested with film Exterior: Excellent. Leatherette slightly peeling in places Shutter/film transport: shutter fires, camera winds on, shutter speeds sound correct Electrical: Meter not working. No corrosion in battery chamber Viewfinder/focusing screen: clean Mirror and lens mount: Clean, minor signs of use.  Film chamber: Shutter and pressure plate look OK Flash connection: hotshoe and PC socket working Lens: glass has a few internal blemishes, and a few specks of dust. Focus is smooth. Iris has a fault and does not open and close properly in A mode. In M mode it works as expected.  No other functions checked, not tested with film.  For items sold for 'parts or repair' - I try to give a good description of any faults I find, but it is not always possible to give a complete list, and there will sometimes be other problems not described in the listing. Please be aware of that before buying.   I often have similar or compatible items for sale, see my shop for details. Please contact me via messages if you have any questions, I’m happy to give advice. Delivery in France This item will be sent by Colissimo or Mondial Relay, depending on your choice at the checkout.  International shipping I can ship this item to any location listed in the postage section of this listing. All items are sent tracked and insured. I use Colissimo, Chronopost, UPS or Mondial Relay, depending on the item and destination. International delivery from France will usually take approximately 5 to 7 working days, but it can occasionally be longer, especially at peak times. Please be aware of this before buying. Any import tax/duties in your country must be paid by the buyer. I try to photograph and describe my items as accurately as possible, and I package them very carefully, however in the unlikely event of a problem please let me know immediately and I will resolve it.

MARK LEVINSON ML 10 AUDIOPHILE VINTAGE PREAMPLIFIER  VERY VERY GOOD CONDITION   (I NEVER SAID MINT !) GOOD WORKING CONDITION    IN 240 V  DELIVERED WITH  ONLY 2 PAIRS OF CAMAC ADAPTATORS (3 ON THE PICTURES) AUX AND TUNER ENTER      PHONO ADJUSTABLE ENTER (IT NEEDS TO OPEN IT FOR CONTROL) WORKS REALY GOOD WITHOUT NOISES LIKE THAT ON HIGH LEVEL ENTERS         PRECISIONS  ALL ORIGINAL CAPACITORS      AFTER SEVERAL TEST ON DIFFERENT CARTRIDGE (DL103  XL 44 SONY   GOLDRING ETC....)    NOISES ON PHONO ENTER  (ESPECIALY ON MC LEVEL    NORMAL   )  SIGN THAT THE CAPACITORS OF THE PHONO CARD ARE TIRED   I PREFER SOLD IT AS IS      THE CAPACITORS ON A LEVINSON IS A SENSITIVE SUBJECT !    AND SOMETIME PEOPLE BLAME ME TO SOLD TINKED DEVICES ! HERE, IT IS IN ORIGINAL CONDITION    IT IS TO THE BUYER TO CHOOSE THE LEVEL OF THE RESTORATION. NEAR ORIGINAL OR UP GRADED THE PRICE IS IN RELATION WITH THE CONDITION        ORIGINAL BOXE  BUT INTERNAL POLYSTYRENES  CHANGED     WILL BE PACKED IN ANONYMOUS BOXE MORE    SHIPPING COST FOR E.U   NO PAYPAL

Goldenear Triton 2. État : "Occasion" Très bon condition general. Superbe enceinte pour la musique et cinema. Envoi possible dans cartons d'origine a la charge de l'acheteur. Description: Three-way floorstanding loudspeaker. Drive-units: 1.06" by 1.31" High-Velocity Folded Ribbon (HVFR) tweeter, two 4.5" cone midrange units, two 5" by 9" cone woofers powered by an internal amplifier, two 7" by 10" passive radiators. Crossover frequencies: 150Hz, 3.5kHz. Frequency range: 16Hz–35kHz. Sensitivity: 91dB/2.83V/m. Nominal impedance: 8 ohms. Recommended amplifier power: 20–500W. Built-in subwoofer amplifier: class-D, 1200W. Dimensions: 48" (1230mm) H (with base, no spikes) by 5.25" (135mm) W front by 7.5" (190mm) W rear by 15" (385mm) D. Weight: 60 lbs (27.3kg). Finish: Glossy piano black with black cloth.

Description: Car Radio FM/AM Antenna which is light-weighted and small-sized has stable performance. This car radio FM/AM is easy to set up with adhesive tape. Light weight and small size 5-section telescopic car antenna Stable Performance Easy to setup For FM and AM Comes with double-sided adhesive tape for easy installation Antenna Length: Approx. 17.7 inch / 45cm (unfold) Cable Length: Approx 78.8 inch / 200cm Package Includes: 1Pc Car Radio Antenna Le 21-janv.-20 à 13:36:06 Paris, le vendeur a ajouté les informations suivantes:

ZAXCOM Nomad 10, with Korthwich bag.Very good condition, first hand. Bought at (AREITEC (official french dealer) Internal cell changed recently. item in Lyon France but i can ship it worldwide. État : "Occasion"