Fet per fuster

COUNTERPOINT SA 12  STEREO HYBRID TUBE /MOS FET AMPLIFIER  GOOD CONDITION  FULL WORKING CERTIFIED   IN 240 V  HAVE BEEN SERVICED BY PRECEDENT OWNER   CLASSY SOUNDING     FINE AND DYNAMIC      FRIENDLY PRICED    SHIPPING COST FOR E.U   NO PAYPAL Specifications Power output: 80 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 1% Damping factor: 89 Gain: 29 dB Signal to noise ratio: 92dB Valve complement: 4 x 6DJ8 Dimensions: 480 x 113 x 322mm Weight: 15kg Year: 1984

Triopo GL-40. Carbon fiber. No s'ha fet servir ni una vegada. Té funda i la capsa original.

AKAI AM-2350 Stereo Integrated Amplifier + AKAI AT-2250L FM/AM Stereo Tuner  AKAI AM-2350 Stereo Integrated Amplifier Puissance de sortie: 35 watts par canal en 8Ω (stéréo) Réponse en fréquence: 20 Hz à 20 kHz Distorsion harmonique totale: 0,2% Facteur d'amortissement: 30 Sensibilité d'entrée: 3 mV (MM), 150 mV (DIN), 150 mV (ligne) Rapport signal / bruit: 75 dB (MM), 95 dB (ligne) Séparation des canaux: 50 dB (MM), 55 dB (ligne) Sortie: 150 mV (ligne), 30 mV (DIN) Impédance de charge des haut-parleurs: 4Ω à 16Ω Semi-conducteurs: 16 x transistors, 13 x diodes, 2 x IC Power output: 35 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.2% Damping factor: 30 Input sensitivity: 3mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 75dB (MM), 95dB (line) Channel separation: 50dB (MM), 55dB (line) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4Ω to 16Ω Semiconductors: 16 x transistors, 13 x diodes, 2 x IC AKAI AT-2250L FM/AM Stereo Tuner  Type: Tuner mono / stéréo Bandes d'accord: FM, MW Échelle de réglage: analogique Plage de syntonisation FM: 87,5 à 108 MHz Plage de réglage MW: 520 à 1605 kHz Sensibilité: 1,9uV (FM), 100uV (MW) Rapport signal / bruit: 70 dB (FM), 55 dB (MW) Distorsion: 0,2% (FM) Sélectivité: 65 dB (FM), 30 dB (MW) Sortie: 500mV (FM), 500mV (MW) Semi-conducteurs: 6 x transistors, 7 x diodes, 1 x FET, 3 x IC Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue FM Tuning Range: 87.5 to 108 MHz MW Tuning Range: 520 to 1605 kHz Sensitivity: 1.9uV (FM), 100uV (MW) Signal to Noise Ratio: 70dB (FM), 55dB (MW) Distortion: 0.2% (FM) Selectivity: 65dB (FM), 30dB (MW) Output: 500mV (FM), 500mV (MW) Semiconductors: 6 x transistors, 7 x diodes, 1 x FET, 3 x IC BON ETAT!!! TRÈS PROPRE! Vous pouvez également acheter un magnétophone et des meubles, comme sur la dernière photo. Voir les autres ventes!!! Les photos sont la partie de la description. Vous achetez ce que vous voyez. Pour toutes questions ou photos supplémentaires, n'hésitez pas à me contacter. Magnétophone et meubles à vendre séparément. Attention! Le prix de la livraison varie en fonction du pays.  Demandez-moi le prix de la livraison, s'il vous plaît. Ask for shipping costs. Shipping to the islands is more expensive.

PIONEER SX-550 Stereo AM/FM Receiver  En état de marche. Son avec distorsion sur un canal. La description Le Pioneer SX-550 est un récepteur stéréo AM / FM de 20 watts doté d'une coupure de son FM, de deux moniteurs à bande et de 2 paires d'enceintes. Caractéristiques Plage de réglage: FM, MW Puissance de sortie: 20 watts par canal en 8Ω (stéréo) Description The Pioneer SX-550 is a 20 watt AM/FM stereo receiver featuring FM muting, two tape monitors and provision for 2 pairs of speakers. Specifications Tuning range: FM, MW Power output: 20 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 60kHz Total harmonic distortion: 0.3% Damping factor: 25 Input sensitivity: 7.5mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 70dB (MM), 90dB (line) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4Ω (minimum) Semiconductors: 3 x FET, 5 x IC, 28 x transistors, 21 x diodes Dimensions: 448 x 141 x 307mm Réponse en fréquence: 10 Hz à 60 kHz Distorsion harmonique totale: 0,3% Facteur d'amortissement: 25 Sensibilité d'entrée: 7,5 mV (micro), 2,5 mV (MM), 150 mV (DIN), 150 mV (ligne) Rapport signal / bruit: 70 dB (MM), 90 dB (ligne) Sortie: 150 mV (ligne), 30 mV (DIN) Impédance de charge des haut-parleurs: 4Ω (minimum) Semi-conducteurs: 3 x FET, 5 x IC, 28 x transistors, 21 x diodes Dimensions: 448 x 141 x 307 mm Les photos sont la partie de la description. Vous achetez ce que vous voyez. Pour toutes questions ou photos supplémentaires, n'hésitez pas à me contacter. Attention! Le prix de la livraison varie en fonction du pays.  Demandez-moi le prix de la livraison, s'il vous plaît. Ask for shipping costs. Shipping to the islands is more expensive.

Amplificateur PA-W04 Power output: 48 watts per channel into 8Ω (stereo) Frequency response: 1Hz to 100kHz Total harmonic distortion: 0.008% Damping factor: 100 Input sensitivity: 1V Signal to noise ratio: 115dB Speaker load impedance: 4Ω to 16Ω Semiconductors: 27 x transistors, 47 x diodes, 2 x FET, 7 x IC Dimensions: 440 x 78 x 373mm Weight: 6.7kg Pré Amplificateur PR-A04 Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.005% Input sensitivity: 0.8mV (MC), 3mV (MM), 150mV (DIN), 150mV (line) Signal to noise ratio: 75dB (MC), 82dB (MM), 80dB (DIN), 102dB (line) Channel separation: 70dB (line) Output: 150mV (line), 30mV (DIN), 1V (Pre out) Semiconductors: 16 x transistors, 15 x diodes, 2 x FET, 6 x IC Dimensions: 440 x 78 x 313mm Weight: 6.1kg Lecteur de cassettes GX-M10 The Akai GX-M10 is a stereo, compact cassette recorder with two-head system. The unit is compatible with LN-, LH-, Cr02- and Metal tapes and has Dolby noise suppression as a result. Type: 2 heads, single compact tape deck. Track system: 4-track, 2-channel stereo. Tape speed: 4.76 cm / s Heads: 1x record/playback, 1x erase. Motor: electronically controlled DC. Tape Type: type I, CrO2, Metal. Noise suppression: B Frequency range: 30Hz to 19kHz (metal tape) Signal / noise ratio: 71dB (dolby B) Wow and Flutter: 0.04% Total harmonic distortion: 0.6% Input: 70mV (line), 0.3mV (mic) Output: 0.41V (line). Size: 440 x 143 x 250 mm. Weight: 6kg Pas de livraison, à venir retirer sur place.

PIONEER SA-708 Stereo Integrated Amplifier Amplificateur stéréo intégré.  Amplificateur de ma collection. Très propre. Puissance de sortie: 65 watts par canal sous 8Ω (stéréo) Réponse en fréquence: 10 Hz à 50 kHz Distorsion harmonique totale: 0,02% Facteur d'amortissement: 35 Sensibilité d'entrée: 2,5 mV (MM), 150 mV (ligne) Rapport signal / bruit: 86dB (MM), 100dB (ligne) Sortie: 150 mV (ligne), 30 mV (DIN) Impédance de charge du haut-parleur: 4Ω à 16Ω Semi-conducteurs: 3 x IC, 2 x FET, 41 x transistors, 31 x diodes Dimensions: 420 x 150 x 337 mm Power output: 65 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.02% Damping factor: 35 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 86dB (MM), 100dB (line) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4Ω to 16Ω Semiconductors: 3 x IC, 2 x FET, 41 x transistors, 31 x diodes Dimensions: 420 x 150 x 337mm Les photos sont la partie de la description. Vousachetez ce que vous voyez. Pour toutesquestions ou photos supplémentaires, n'hésitez pas à me contacter. Attention! Le prix de la livraison varie en fonctiondu pays.  Demandez-moile prix de la livraison, s'il vousplaît. Askfor shipping costs. Shipping to the islands is more expensive.

HITACHI SR-503L AM/FM Stereo Receiver Plage de syntonisation: FM, MW, LW Puissance de sortie: 20 watts par canal en 8Ω (stéréo) Réponse en fréquence: 20 Hz à 20 kHz Distorsion harmonique totale: 0,3% Facteur d'amortissement: 25 Sensibilité d'entrée: 2,5 mV (MM), 450 mV (DIN), 200 mV (ligne) Rapport signal sur bruit: 70 dB (MM), 90 dB (ligne) Sortie: 200 mV (ligne), 40 mV (DIN) Impédance de charge du haut-parleur: 4Ω (minimum) Semi-conducteurs: 1 x FET, 4 x IC, 14 x transistors, 18 x diodes Dimensions: 435 x 134 x 359 mm Tuning range: FM, MW, LW Power output: 20 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.3% Damping factor: 25 Input sensitivity: 2.5mV (MM), 450mV (DIN), 200mV (line) Signal to noise ratio: 70dB (MM), 90dB (line) Output: 200mV (line), 40mV (DIN) Speaker load impedance: 4Ω (minimum) Semiconductors: 1 x FET, 4 x IC, 14 x transistors, 18 x diodes Dimensions: 435 x 134 x 359mm Les photos sont la partie de la description. Vous achetez ce que vous voyez. Pour toutes questions ou photos supplémentaires, n'hésitez pas à me contacter. Attention! Le prix de la livraison varie en fonction du pays.  Demandez-moi le prix de la livraison, s'il vous plaît. Ask for shipping costs. Shipping to the islands is more expensive.

SONY STR-4800 AM/FM Stereo Receiver Première main. Tout fonctionne correctement ! Caractéristiques Plage de syntonisation: FM, MW Puissance de sortie: 35 watts par canal dans 8Ω (stéréo) Réponse en fréquence: 10 Hz à 35 kHz Distorsion harmonique totale: 0,2 % Facteur d'amortissement: 35 Sensibilité d'entrée: 2,5 mV (MM), 250 mV (ligne) Rapport signal sur bruit: 70 dB (MM), 90 dB (ligne) Sortie: 250 mV (ligne) Semi-conducteurs: 4 x IC, 1 x FET, 53 x transistors, 36 x diodes, 1 x LED Dimensions: 490 x 170 x 415 mm Specifications Tuning range: FM, MW Power output: 35 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 35kHz Total harmonic distortion: 0.2% Damping factor: 35 Input sensitivity: 2.5mV (MM), 250mV (line) Signal to noise ratio: 70dB (MM), 90dB (line) Output: 250mV (line) Semiconductors: 4 x IC, 1 x FET, 53 x transistors, 36 x diodes, 1 x LED Dimensions: 490 x 170 x 415mm Les photos sont la partie de la description. Vous achetez ce que vous voyez. Pour toutes questions ou photos supplémentaires, n'hésitez pas à me contacter. Attention! Le prix de la livraison varie en fonction du pays.  Demandez-moi le prix de la livraison, s'il vous plaît. Ask for shipping costs. Shipping to the islands is more expensive.

PIONEER SA-9800 Integrated Stereo Amplifier The Pioneer SA-9800 has the impressive feature which is the NSA (non switching amplifier), created specially by Pioneer. This is a type of amplifier that adopts the merits of both class A and class B amplifiers, and it excels in keeping down the heat loss and allows the transistors to operate all the time in the active region. For this reason, a high output power with a very low distortion factor is yielded all the way up to the high frequencies. Specifications Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 100kHz Total harmonic distortion: 0.005% Damping factor: 55 Input sensitivity: 0.1mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 72dB (MC), 90dB (MM), 110dB (line) Output: 150mV (line), 1V (Pre out) Semiconductors: 3 x IC, 6 x FET, 73 x transistors, 36 x diodes Dimensions: 453 x 155 x 425mm Puissance de sortie: 100 watts par canal sous 8 Ω (stéréo) Réponse en fréquence: 5 Hz à 100 kHz Distorsion harmonique totale: 0,005 % Facteur d'amortissement: 55 Sensibilité d'entrée: 0,1 mV (MC), 2,5 mV (MM), 150 mV (ligne) Rapport signal/bruit: 72 dB (MC), 90 dB (MM), 110 dB (ligne) Sortie: 150 mV (ligne), 1 V (sortie préampli) Semi-conducteurs: 3 x IC, 6 x FET, 73 x transistors, 36 x diodes Dimensions: 453 x 155 x 425 mm Testé. Fonctionne correctement. Les photos sont la partie de la description. Vous achetez ce que vous voyez. Pour toutes questions ou photos supplémentaires, n'hésitez pas à me contacter. Attention! Le prix de la livraison varie en fonction du pays. Demandez-moi le prix de la livraison, s'il vous plaît. En savoir plus Collaboration commerciale.

Vend Yamaha CA-800 II, il sort de révision, facture fournie. Excellent état cosmétique. Il est vendu avec son tuner CT-400 en très bon état également. Envoi Mondial Relay 25€ avec assurance. International Shipping on demand. NS Series Stereo Integrated Amplifier w/Manual Class A Amplifier Specifications Power output: 50 watts per channel into 8Ω (stereo) Class B Power output: 10 watts per channel into 8 Ohms (stereo) Class A w/0.02% THD at 1 watt Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.1% at rated power Total harmonic distortion: 0.04% at 1 watt Damping factor: 70 Input sensitivity: 2.5mV (mic), 3mV (MM), 120mV (line) Signal to noise ratio: 70dB (mic), 80dB (MM), 90dB (line) Channel separation: 50dB (MM), 50dB (line) Output: 120mV (line), 0.775V (Pre out) Speaker load impedance: 4Ω to 16Ω Semiconductors: 2 x FET, 49 x transistors, 12 x diodes, 4 x zener diodes Dimensions: 436 x 144 x 323mm Weight: 13.5kg Tuner FM Tuner Section Usable Sensitivity: 2,0 µV Image Response Ratio (84 MHz): 55 dB IF Response Ratio (84 MHz): 75 dB Spurious Response Ratio (84 MHz): 75 dB Capture Ratio: 1,5 dB Effective Selectivity (IHF): 75 dB Signal-to-Noise Ratio: Mono: 70 dB Stereo: 66 dB Total Harmonic Distortion (400 Hz): Mono: 0,3% Stereo: 0,5% Stereo Separation (400 Hz): 40 dB Frequency Response: 20 Hz to 14 kHz, +1,5 dB, -3 dB Subcarrier Suppression Ratio: 40 dB AM Tuner Section Usable Sensitivity (IHF, bar antenna): 52 dB/m Selectivity (1000 kHz): 25 dB General Section Power Supply: AC 100-120V, 220-240V, 50/60 Hz Power Consumption: 2,6 W (100V) Dimensions (W x H x D): 17 x 12 x 6 in Weight: 11 lbs.

Amplificateur Pioneer SA 9500 SERVICED. All defective caps have been replaced and two relays also. Pioneer believes in music. And if you do, too, you'll find a faithful friend in the new SA-9500; one of the most musically minded pre/main stereo amplifiers we've engineered. It combines massive stereo output power with a delicacy of transparency; a rare blend in these days of lots of power at any cost. In other words, we haven't simply beefed up the power section at the expense of the tonal quality, frequency response or other aspects so important to the sound of a high fidelity component. The Pioneer SA-9500 does deliver an unusually large continuous power output of 80 watts per channel, min RMS at 8 ohms from 20 Hertz to 20,000 Hertz with no more than 0.1% total harmonic distortion, but it also ensures that even when operated at low volumes the performance retains a crisp, sparkling clarity. The dynamic response and reliability of the SA-9500 are matched with a flexibility of use you'll rarely find in this price range. Tone control versatility, for instance: both the bass and treble sections have 3-position turnover selection and there's a tone on/off switch for "flat" response at a touch. The 2-step high and low filters, the extra convenient tape duplicating switching system, multiple input source selection, 2-system speaker switching and much more mean first-class handling. We believe in music. And we're sure that if you do, too, you'll believe in the all-new SA-9500. Specifications Power output: 80 watts per channel into 8Ω (stereo) Frequency response: 7Hz to 40kHz Total harmonic distortion: 0.005% Damping factor: 30 Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (line) Signal to noise ratio: 65dB (mic), 70dB (MM), 90dB (line) Output: 150mV (line), 2V (Pre out) Semiconductors: 2 x FET, 54 x transistors, 26 x diodes Dimensions: 420 x 165 x 403mm Weight: 17.2kg Accessories: connecting cord, hex wrench, jack covers Year: 1976

Accuphase E-202 Amplifier Just Serviced. For sale is a classic Accuphase E202 Integrated Amplifier 100WPC built like a German Panzer. Classic Accuphase sound! Recently serviced (the power supply caps have been replaced and some others, all the contacts have been checked and cleaned) and in overall great cosmetic condition. Description The Accuphase E-202 is a Integrated Stereo Amplifier which possesses a great many separate component class features and characteristics. Full play has been given in its design to the advanced engineering techniques that were developed far the P-300 Power Amplifier and the C-200 Control Center which spearheaded the Accuphase line of highest quality audio equipment. Among the many special features of the E-202 is the high power output of 100 watts per channel into 8 ohms assuring excellent sound quality at ALL listening levels. This high power capability, with distortion at less than 0.1% over the entire audio range of 20 to 20000 Hz is fully guaranteed. Heavy duty power transistors in a parallel push-pull drive output stage and large heat sinks back up this Accuphase Warranty. Design emphasis was placed on maintaining excellent sound quality also at the low listening levels. Specifications Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.15% Damping factor: 50 Input sensitivity: 2.5mV (MM), 160mV (line) Signal to noise ratio: 74dB (MM), 80dB (line) Speaker load impedance: 4Ω to 16Ω Semiconductors: 53 x transistors, 4 x FET, 44 x diodes, 2 x thermistors Dimensions: 455 x 152 x 355mm Weight: 19.5kg

Ampli vintage Sansui AU 317 en excellent état. Entièrement révisé et réglé, fonctionnement parfait. Très bonne réserve de puissance pour alimenter la plupart des enceintes et ce, avec beaucoup de finesse et de matière. Excellente entrée phono MM. Caractéristiques techniques: Power output: 50 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 70kHz Total harmonic distortion: 0.03% Damping factor: 70 Input sensitivity: 20mV (mic), 2.5mV (MM), 150mV (line) Signal to noise ratio: 77dB (MM), 100dB (line) Channel separation: 65dB (MM), 73dB (line) Output: 150mV (line), 1V (Pre out) Speaker load impedance: 8Ω (minimum) Semiconductors: 51 x transistors, 25 x diodes, 2 x FET Dimensions: 430 x 110 x 340mm Weight: 9.5kg Year: 1978

ampli pioneer sa-608 et tuner tx-608l de 1979 en superbe état de marche et esthetique... révision effectué: changement de 2 ampoule du tuner potentiomètre et sélecteur révisé et nettoyer plusieurs condensateur changer dons les 2 capa de gestion du vu mètre bleu le reste tester a l ESR test des résistances et des diodes rapide tous est ok au spec d origine nettoyage complet intérieur, extérieur test des courant de repos...etc COMME NEUF Il s'agit d'un appareil très bien équilibré, subtil et doté d'un timing exceptionnel; chaleureux et puissant il se mariera avec de très nombreuses enceintes. Specifications amplificateur Power output: 45 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.02% Damping factor: 30 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 78dB (MM), 100dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Semiconductors: 7 x IC, 23 x transistors, 17 x diodes Dimensions: 451 x 151 x 271mm Weight: 8.3kg Year: 1979 Specifications tuner Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue Sensitivity: 1.9uV (FM), 300uV (MW) Signal to Noise Ratio: 74dB (FM), 50dB (MW) Distortion: 0.15% (FM) Selectivity: 60dB (FM), 35dB (MW) Frequency response: 20Hz to 15kHz (FM) Output: 650mV (FM) Semiconductors: 3 x IC, 1 x FET, 8 x transistors, 15 x diodes Dimensions: 451 x 151 x 284mm Weight: 5.3kg idem marantz harman kardon NAD kef focal infinity B&W Yamaha sony pioneer denon micromega Rotel Onkyo sansui bose cambridge mc intosh luxman thule bc acoustic etc...

En parfait état de fonctionnement, Réception tuner 2 BANDES impeccable.  S pécifications: Tuning range: FM, MW Power output: 15 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 60kHz Total harmonic distortion: 0.5% Damping factor: 25 Input sensitivity: 7.5mV (mic), 2.5mV (MM), 150mV (line) Signal to noise ratio: 70dB (MM), 90dB (line) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4Ω (minimum) Semiconductors: 1 x FET, 3 x IC, 28 x transistors, 15 x diodes Dimensions: 448 x 141 x 307mm Weight: 8.6kg Accessories: FM T-type antenna ANNEE: 1976