Follow and coordinate

FOLLOW FOCUS HF PDMOVIE PD1. État : Occasion Service de livraison : Colissimo Excellent follow focus pour DSLR et Camera cinéma. Fonctionne très bien, follow plug and play, super facile a faire fonctionner (plus simple que DJI Follow ou autres...) Motor puissant !!!! Fonctionne a 100m de distance.  Acheté neuf 1100€  Pour plus d'infos me demander par message !!!

Produit: FOLLOW FOCUS SUNRISE EA-01 à FRICTION. État: Le follow focus présente des marques d’usures ici et là mais il fonction parfaitement. Le follow focus à friction Sunrise EA-01 offre une solution sans bague adaptatrice, ce qui facilite les changements rapides d’objectifs sans avoir besoin d’acheter ou d’installer des bagues pour chacun. Prix neuf: 99,00€ Frais de port: France: 6,00€ Monde: 12,00€ __________ Product: FOLLOW FOCUS SUNRISE EA-01 Condition: The follow focus shows some marks and scratches here and there but works perfectly. Shipping: France: 6,00€ Worldwide: 12,00€

JAG35 WIRELESS ELECTRONIC FOLLOW FOCUS v2. État : "Pour pièces détachées/ne fonctionne pas" Je vends mon kit JAG35 WIRELESS ELECTRONIC FOLLOW FOCUS  v2. Il s’agit du KIT 2 incluant: -WEEF controller (compatible with two motors) -WEFF receiver (avec CANON LP-E6 battery plate) -batterie non inclue- -2 Pro Motors -2 LEMO Motor cable -2 Ring lens  +adaptateurs et rechanges (engrenages, roues, plates…) ATTENTION: le kit est complet mais ne marche plus… La liaison HF ne se fait plus, je ne sais pas pourquoi… En vente pour pièces donc, ou pour bricoleur averti... N’hésitez pas si vous avez des questions. Présentation et Infos = Control: Dimensions: H: 7.5" | W: 3" | L: 4" Weight: 1lb 7oz Receiver: Dimensions: H: 3.5" | W: 2.5" | L: 4" Weight: 7.2oz Based on the success of the Wireless Follow Focus v1 combined with the feedback from our dedicated customers; we knew a new version must be constructed. A unit that had all of the same characteristics of the first version plus added improvements. Some of those enhancements included is reduce the noise level and the ability to withstand production-use while still being affordable. We are happy to announce that the highly anticipated WEFF v2 has finally arrived! The professional grade case reduces the motors noise level and can withstand long durations of production usage.This custom unibody design has the battery integrated in the receiver and a built-in regulator that can support anywhere between 6v-30v preventing damage to the unit. Withstanding a wide range of voltage makes it possible to use different existing battery systems, it is even compatible with a D-tap battery system. Another feature is that it operates on two distinct channels. The main channel was designated for focus and the other channel for either Zoom or Iris; although the channels can be set up however desired. This handheld unit has adjustable end stops that set a range of rotation that can direct the motor in reverse if necessary. The motor was modified to be stronger and faster than before. The connectors used to power the WEFF V2 are the high-end industrial Lemo connectors. The WEFF V2 has a combination of both new and improved features that enhances the performance of a shooter. Both the unit and the motor are precise and configurative. An important feature we always strive to maintain in our products is affordability. PRODUIT ORIGINAL JAG35

ARRI FOLLOW FOCUS HF WCU-4  Perfect condition - All update to last firmware  Work for RED (all cam), ARRI (all cam) - 3 X CLM4 MOTOR  - 2 X LDE-1 MOTOR for created table lens - 4 X CLM4 CABLES  - 1 X KIT L-CUBE + LBUS Cables - 1 X ARRI Plate with V-Lock plate  - All accessory from ARRI original part are include - SET Magic arms for fix the V-Lock plate to the WCU-4 - SET FULL RING WCU-4 WHITE, METRIC, FEET - WCU-4 UNIT (Last Firmware)  - UMC-4 UNIT (With all cable include) - UDM DISTANCE (With all cable include) - ZMU-3 (With all cables and fixation for fluide head)  - 2 SET of Long cable for ZMU-3 - 3X Batteries Sony and chargeur (All cables include)  - SET of Gears for CLM4  - TC Cables and all cable are include inside the KIT - Special cable for Cooke S4/i - Special cable for update L-CUBE or C-force Motor Delivered with 1 WCU-4 ARRI Flight case and 1 small flight case  No V-Lock Batterie are include - Only Sony Batterie are include ---------- Payment We accept payment via PayPal only. If you purchased multiple items from us, you can send payment to us for all the items instead of paying for them individually. When you click the Pay Now button, will automatically determine if there are any other items that you have won or purchased from me and will combine them for your review. Shipping Maybe we can ship your item sooner than that, but message us first. Returns If your order has been received and it is not what you ordered, or if your item has a manufacturing defect, please contact us within 15 working days of receipt of the goods. We will be responsible for all loss. Please send the items back to us and we will send you a replacement or 100% refund your money. Feedback Your satisfaction and positive feedback is very important to us. Please leave positive feedback and 5 stars if you are satisfied with our items and service. If you have any problems with our items or services, please feel free to contact us first before you leave negative feedback. We will try our best to solve any problem and provide you with the best customer services.

Shoulder rig de la marque Filmcity en parfait état, à peine utilisé. Modèle FC-57-N composé des éléments suivants: Filmcity shoulder rig kit in perfect condition. Used very few times. The kit consits of the following items:  Camera Cage Top handle 300mm female rods (x5) 200mm female rods (x2) 150mm male rods (x2) Handle set Shoulder pad (with attaches for battery or external SSD/HDD) Quick release adapter (with 1/4' and/or 3/8' screws for camera) Handle bracket Z-bracket Straight bracket Wire clamps MB-600 Matte box (4/3 and 16/9) French flag and side barn doors Knicker X1 Follow focus Speed crank Gear ring set (6 pc to fit any lens size) La boîte d'origine ayant été ouverte et abîmée au moment du passage à la douane, le matériel est emballé dans une autre boîte avec le manuel d'utilisation d'origine en anglais. Comes with its original istructions manual and fitting replacement box as the original packaging had been damaged at customs inspection.

Hello, I'm forced to sell all my video making gear as sadly my work doesn't let me to use it as much as I would. I'm a hobbyist and not a processionnal. Nearly everything is in as-new condition, with original accessories and bills for EU warranty. I paid >7600€. All gear if shipped will be protected in video-gear foam-textile-cases similar to what you can find in backpack dedicated to photographers. I'm offering it for free. It can also be picked in Paris. Here's the main parts included: - ZCAM E2 4K - Viltrox adapter with Metabones ultra glass - Sigma EF 18-35mm - Canon EF 70-200mm L III - Follow focus Titla Nucleus Nano with custom alimentation cable - CFAST adapter to SATA SSD to record in Raw - 4 Batteries NPF970 + 2 chargers - XLR to E2 cable - The shoulder rig. The shoulder rig by itself is worth more than 1600€. Many spare parts included so you will be able to customize it to your liking. 1 × SmallRig Single 15mm Rail Clamp 15491 × SmallRig VCT-14 Quick Release Tripod Plate 21691 × SmallRig Holder for Portable Power Banks BUB23361 × SmallRig Universal Holder for External SSD BSH23431 × SmallRig Rod Connector with M12 Thread for 15mm Aluminum Alloy Rods (Pack of 2) - 9001 × SmallRig 2pcs 15mm Black Aluminum Alloy Rod(M12-15cm) 6inch 10501 × SmallRig 15mm Rod Cap (M12, 4 pcs) 16171 × SMALLRIG QR Rail Clamp(12mm Rod) 14031 × SmallRig Safety NATO Rail with 15mm Rod Clamp 18561 × SmallRig Extension Arm with Arri Rosette 18701 × SmallRig Left Side Wooden Grip with Arri Rosette 18911 × SmallRig Aluminum Alloy Pair of 15mm Rods (M12-4inch)10491 × SmallRig 2pcs 15mm Black Aluminum Alloy Rod(M12-25cm) 10inch 10521 × SmallRig Cheese Plate 16811 × SmallRig 15mm Rod Clamp with Arri Rosette 16862 × SmallRig Extension Arm with Arri Rosette 18701 × SmallRig Sony VCT-14 Shoulder Plate 19541 × SmallRig 15mm LWS Universal Lens Support 21521 × SmallRig Quick Release Clamp (Arca-type Compatible) 21431 × SmallRig Super Lightweight 15mm-Railblock (2pcs Pack) 20611 × SmallRig Quick Release Clamp for Nucleus-Nano Hand Wheel Controller FAQ23231 × SmallRig EVF Mount with NATO Clamp and Arri Rosette 15831 × SmallRig M6 Screw Wing nut 15991 × SmallRig Adjustable EVF Mount with ARRI Rosette 19381 × SmallRig Cold Shoe Extension 20441 × SmallRig Right Side Wooden Grip with NATO Mount 21171 × SmallRig Arri Locating Handle 21651 × SmallRig Cage for Z cam E2 Camera 22641 x SmallRig Black Aluminum Alloy 15mm Rod M12-20cm 8inch Long (2 Pack)- 1051 1x SmallRig DSLR Camera Rig Cold Shoe Mount Adapter with Anti-off Button For Microphone Flash Light Monitor Attach 22601x Sony NPF plate to DC Sincerely,

Dji Ronin-S 3 axis handheld gimbal stabilization with follow focus in perfect condition. I never used it, I'm selling it because it doesn't work well with my bmpcc6k and sigma art 18-35 even with counterweight (too heavy).

Smove mobile Gimbal - Extendable Smartphone Stabilizer . État : Occasion SMOVE MOBILE is a 3-axis telescopic stabilizer with a built-in extension for any size smartphone with pro features: auto face follow and object tracking, programmable motion time lapse, intuitive user controls, auto panorama, tripod and extension adapter mount, and advanced customizable user settings

Dji OM 4 SE Gimbal in Great Condition. As New. *Foldable Smartphone Gimbal Stabilizer *Magnetic Phone Clamp, Stronger Torque *Even More Compact, Up to 10.2 oz Load *Hand Gesture Control, Shape Recognition *Supports up to 3.3" Wide Smartphones *Control Gimbal/Phone with DJI Mimo App *ActiveTrack, Follow, and Sport Modes *15-Hour Runtime,1/4"-20 Tripod Mount *Time-Lapse, Hyperlapse, Panorama Modes *USB Power Output for Phone/Accessory

Philips MSD Platinum 20R 470W 85-110V 4 types de lampes disponibles, selon l'état d'usure. Les lampes notées comme 4 types of lamps avalaible, depending on lifetime. Lamps noted as Caractéristiques techniques: General Information Cap-Base -  [-] Operating Position UNIVERSAL  [Any or Universal (U)] Main Application Stage/Touring Life to 50% Failures (Nom) 1500 h System Description Reflector E21.9 TCM Light Technical Color Code 2 Luminous Flux (Nom) 22400 lm Chromaticity Coordinate X (Max) 314 Chromaticity Coordinate X (Min) 280 Chromaticity Coordinate X (Nom) 296 Chromaticity Coordinate Y (Max) 316 Chromaticity Coordinate Y (Min) 290 Chromaticity Coordinate Y (Nom) 298 Correlated Color Temperature (Nom) 8000 K Luminous Efficacy (rated) (Nom) 47 lm/W Operating and Electrical Power (Nom) 470 W Voltage (Max) 110 V Voltage (Min) 85 V Controls and Dimming Dimmable Yes Mechanical and Housing Cap-Base Information - Luminaire Design Requirements Bulb Temperature (Max) 900 °C Pinch Temperature (Max) 350 °C Product Data Full product code 871869668420700 Order product name MSD Platinum 20 RB 1CT/8 EAN/UPC - Product 8718696684207 Order code 928495205314 Pour une expédition hors France, merci de me contacter avant achat pour vous communiquer le bon montant des frais de port. If the item have to be shipped outside France, please send me a message before buying to tell you the good shipping price.

Hello, I am selling my Gimball, only used a couple of times for sport videos recording. Will come in the original box and the invoice. Details below: ACR The Plus is a device capable of stabilising small digital cameras and DSLRs. The stabilisers job is to make sure that the horison level is perfectly kept where it should be even during the most insane shot – it also negates unwanted round movements of the camera. An agile operator experienced in working with Steadicam or similar systems can achieve results not possible before. The versatility of this technology is limited solely by the creativity of users and the gear itself is very easy to configure. Handing over The Plus during a single, continuous shot, changing the shooting action from handheld to UAV, working in normal and inverted modes – these tasks require only a moment of preparation and open completely new horizones to open-minded filmmakers. Give it a try! The stabiliser Thanks to using a twin gyro & accelerometer system the stabilisation itself is sharp and precise while keeping the device simple to use. A powerful processor allowed us to enhance the primal functionality of the stabiliser with a set of new functions: more natural, iconic Follow Mode, larger number of saveable settings profiles, more reliable operation in demanding conditions. Three direct drive brushless motors were created to perfectly control the camera on each of the stabilised axes. The stabiliser was built according to our own solutions and technology. We used the best available materials – aircraft grade duraluminum, carbon fibres. The electronics and motors were developed from scratch to meet the requirements of our most demanding users.   The device Is powered by a single LiIon battery (included in the set) fitted inside a dedicated compartment within the carbon tube. Depending on your gear configuration it can work constantly up to two hours on a single charge. The battery charger is also included. A uniqe feature is the possibility to power up external accessories attached close to your camera straight from the main battery thanks to an auxillary power socket located at the camera shelf. Such accessories include wireless video transmission systems, follow focus systems, etc. ACR The Plus is the upgraded version of the classic BeSteady ONE – the gimble which started our journey. The first units of the predcessor were delivered to the first users around the end of 2013. We would not have made it without the support of hundreds of wonderful people who supported us via the initial KickStarter campaign. Thanks to the invaluable help from many enthusiasts we were able to revaluate, test and complete the upgrade project with success.    The heart of the BeSteady is within the mainboard. Highly modified BaseCam software, developed in direct cooperation with Alexei Moskalenko, enabled us to create a product tailored for your needs. A fast Cortex processor, vast internal memory and twin gyro & accelerometer system allows the device to easily cope with tasks such as fast running, shooting from moving vehicles and working at uncommon and extreme angles and positions. The lack of complicated configuration procedures (the so-called PID tuning) is gone with the introduction of simple, understandable sliders responsible for setting the needed parameters for every axis. The uniqe, very characteristic handheld mode, the Follow Mode, allows the operator to catch smooth scenes during continuous takes thanks to responsive and natural movement control system with a lot of precise math behind it. Moreover, the device can be controled using a dedicated analog Thumbstick or an external remote control device. The stabiliser can work in different modes thanks to the implementation of advanced control & stabilisation algorythms. The basic mode of operation is the Xtended Stabilisation – where the device maintains the exact camera position targ

Thank you for watching. I re-post this product, because the bidder who won the auction last week, unfortunately cancel this auction. Nebula 5100 3-Axis Lite Handheld Gimbal with Built-In Encoder Awesome gimbal. Includes all original accessories and packaging. Photos of actual gimbal. I have to separate it due to changing my camera equipment. I recommend this gymbal stabilizer for the videographer who want to step up the quality of image to the next level. Especially for Canon 5D, Sony α7II, Panasonic GH5 users. 5D in photos is not inclued. Accepts payload up to 5.5 lb (2.5 Kg) ----------------------------------------------------------------------------------------------- Nebula 5100 3-Axis Lite Handheld Gimbal with Built-In Encoder  The Nebula 5100 3-Axis Lite Handheld Gimbal is a stabilizer designed to support loads up to 5.5 lb, making it suitable for most DSLR and mirrorless camera systems. It features three high-torque motors with built-in encoders that help stabilize the camera along the pitch, roll, and yaw axes. The gimbal features an integrated full-metal structure with the main arm, roll axis arm, and the tactical cage. Its aluminum-magnesium-silicon alloy construction and wide arm structure provide both stability and rigidity. Specially designed for filming, the tactical cage allows you to quickly remove the camera from the gimbal and mount it on a tripod. It provides four operation modes—normal, hang, torch, and roll follow. It supports one-key recording and one-key back-to-midpoint functions. The 5100 gimbal uses a replaceable 1850mAh battery that provides 8 to 10 hours of battery life, and features a direct charge port that allows you to charge the gimbal without removing the battery. It also features three 1/4"-20 threaded screw holes on the top and bottom of the handle to allow the use of various support equipment. A leather case is included for easy storage and transportation. Load Capacity5.5 lb (2.5 kg)Operation ModesNormal, hang (inverted), torch (locked), and roll follow modesMaterial of ConstructionAluminum-magnesium-silicon alloyBatteryRechargeable 1850 mAh batteryBattery Runtime8 to 10 hoursWeight2.4 lb (1.1 kg) High-torque motors with built-in encoders for each axis360° rotation along all three axesAccepts payload up to 5.5 lbBuilt-in encoder helps stabilize the camera (no balancing required)Replaceable 1850mAh battery with 8 to 10 hours of operationIntegrated structure with a structural barycenterTactical cage with hidden cable designMade from aluminum-magnesium-silicon alloyErgonomic joystick for axis controlOne-key recordingThumb-controlling supportOne-key, back-to-midpoint functionDouble sides with the pitch axis for cameras with flipping LCDThree 1/4"-20 threaded holes on the top and bottom of the handle for accessoriesNormal, hang (inverted), torch (locked), or roll follow modeMicro-USB interface for PC connectionDirect charge port for charging the battery without removing it

The Talki Walki for moto is a revolutionary new way to communicate with your riding buddies while you are on the go. This innovative device allows you to connect with up to 15 riders at once, ensuring that you never miss an opportunity to share the thrill of the ride or coordinate your group's next move. The Talki Walki is designed specifically for motorcycle use and is equipped with advanced features to make your riding experience even more enjoyable. First and foremost, the Talki Walki is a hands-free communication system, allowing you to keep both hands on the handlebars at all times. It features a built-in microphone and speaker system, which is easily adjustable to suit different helmet sizes and preferences. The device also comes with a noise-cancelling technology, ensuring that your voice is clear and audible to your fellow riders, even in the loudest environments. The Talki Walki is also compatible with GPS navigation systems, enabling you to share your route and location with other riders in real-time. This feature is particularly useful when riding in unfamiliar areas or when navigating through complex city streets. Additionally, the device includes a built-in intercom function, allowing you to communicate with a passenger or a rider in the same vehicle. The Talki Walki has a range of up to 1.6 kilometers (1 mile) in open terrain, making it ideal for long rides and group tours. It is also waterproof and dustproof, ensuring that it can withstand the elements and last for years to come. The device is rechargeable via a USB cable and comes with a convenient carrying case for easy storage and transport. In summary, the Talki Walki for moto is a must-have accessory for any motorcycle enthusiast who values safety, communication, and fun. With its advanced features, hands-free design, and long-range capabilities, this device will transform the way you ride and connect with your fellow riders.

Vendeur 100% Evaluations SIRUI Swift P1 Stabilisateur Gimbal à 3 Axes pour téléphones Mobiles, Appareils Photo Sportifs et sans Miroir Ready, Steady, Go! Dual Stabilization System The powerful motor optimizes anti-disturbance performance and provides smooth stabilization with the A1 Algorithms to capture steady footages in motion • 900g/1.98lbs Max. Load • 3 Motor Force Moments • Universal Quick QR Plate • Wheel Dial Control • Auto Focus • POV (ROLL FOLLOW MODE) • Instant Scene Transition • Path Lapse • Active Track • Mini Tripod Four in One Provide three high performance motor force movements to support a load capacity up to 900g/l.98 lbs to create your own professional cinematic art with mobile phones, mirrorless cameras, card cameras or action cameras. Mirrorless Cameras Action Cameras O Card Cameras Mobile phones Visual Shot Control Options in use are in clear view on the OLED UI for precise shooting control with the auxiliary wheel dial and buttons. • OLED User Interface • Tilting/Panning Control Analog Stick • Auxiliary Wheel Dial • Shutter Button • Focus Button • Mode Switch Button - Mode Options: Tilting-following Locked, Tilting-following, Triaxial Tracking Locked and pov (ROLL FOLLOW MODE) • Power Switch/Motor Force Switch Focusing Control at your Fingertips Need to focus quickly? With a simple connection, the focusing button will do it all. Bevel Gimbal Arm While framing shots, the bevel arm and a camera Will vary in heightto provide a clear camera screen view. Sirui Swift P1 Features - Universal Quick Mount Plate - Auxiliary Wheel Dial - Function Keys for Instant Axial Control - Stand firm with the included Tripod Base - Instant Scene Transition - POV (ROLL FOLLOW MODE) - Path Lapse - Active Track

- Provide international logistics tracking number  ​ iPod Touch 6 Generations and Colors  iPod Touch 6th Generation Red, Space Gray, Gold, Silver, Pink, and Blue important information   iOS Specifics Each generation iPod touch has a different latest iOS available for it. This is important because not all games and apps will run on older versions of iOS. Please research what games and apps will work for you before purchasing. 1st generation iPod touch: iOS 3.1.3 2nd and 3rd generation iPod touch: iOS 4.2.1 4th generation iPod touch: iOS 6.1.6 5th generation iPod touch: iOS 9.3.5 6th generation iPod touch: iOS 12.4.5 7th generation iPod touch: Newest iOS Product Description Your music. Wherever you go. iPod touch is the perfect way to carry your music collection in your pocket. With the iTunes Store - the world's largest music catalog - you can load up your iPod touch with your favorite songs. And thanks to iCloud, everything you purchase through the iTunes Store is automatically available on all your devices for free. To enhance your music experience even more, Apple Music is available on your iPod touch, right in the Music app. Gaming - More power to play with. A powerful A8 chip. A stunning Retina display. An incredibly portable design. Whether you like fast-paced action, amazingly detailed strategy games, or beautifully intricate puzzles, iPod touch offers the ultimate mobile gaming experience. A8 chip. Satisfy your need for speed. iPod touch features an Apple-designed A8 chip built on 64-bit architecture. This desktop-class chip features GPU performance up to 10 times faster than the previous-generation iPod touch - so the graphics in your favorite games are more responsive and look more vivid than ever before - and CPU performance is up to six times faster. And you get the same great battery life, with up to 40 hours of music and 8 hours of video playback. ★Package contain: 1 x Apple iPod Touch6 Mp3/Mp4 Player (Sealed in the retail box)       1 x Shop free Service       1 x Earphone+1 x USB cable+1x Charger+Retail box ★Payment:     PayPal payment ONLY.     Please be sure your shipping address is correct. We will only follow your address listed at the PayPal payment for the shipment. ★Shipping:     Item will be shipped within 24 hours as soon as your payment verified.     We ship to PayPal's address ONLY. Please make sure your address in PayPal is matched with your shipping address before you pay.     We will NOT be responsible for any delay during delivery including but not limited to customs postage checking, strike, force majeure etc.     Buyers are responsible for any custom/duty taxes incurred in your country. ★Return Policy:     If you are unsatisfied with our item or service, then please follow the good practice to contact us before leaving any feedback. We are committed to resolve all issues in a friendly and satisfactory manner.     Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materials.     Please repack the item carefully. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective. In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable.     Items returned without notification will be refused and returned to the sender. Buyer is responsible for All Return Postage and Shipping Charges. Buyer is responsible for additional shipping costs for items that are returned refused and/or undeliverable. ★Feedback:     In order to provide you better service, please treat the transaction fairly. Feedback is our life, before you leave a neutral or negative feedback, plea