Following manual

This manual for the Rolleiflex 2.8C is in very nice condition. It's in French. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- About Camera Sanctuary: Like you, I love cameras. I bring all manner of equipment into the Camera Sanctuary in the hope that I can place it in a new home. I handle everything from collector’s pieces to total beaters, Leica to Lomo, Alpa to Argus. You can buy from me secure in the following: - My descriptions are honest. Some cameras have been babied, and some have been brutalized. There’s room in the world for both, but I won't try to sell one as the other. - I won’t pretend I don’t know things. - I’ll take back anything that doesn’t meet your expectations. - Be sure to check out my other sales. I can combine shipping to reduce your costs.

This little adapter adds manual shutter functionality to your OM10. Includes multi-language instruction sheet. Be sure to check out my other sales. I can combine shipping to reduce your costs. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- About Camera Sanctuary: Like you, I love cameras. I bring all manner of equipment into the Camera Sanctuary in the hope that I can place it in a new home. I handle everything from collector’s pieces to total beaters, Leica to Lomo, Alpa to Argus. You can buy from me secure in the following: - My descriptions are honest. Some cameras have been babied, and some have been brutalized. There’s room in the world for both, but I won't try to sell one as the other. - I won’t pretend I don’t know things. - I’ll take back anything that doesn’t meet your expectations.

This multi-language manual is in acceptable condition.  Be sure to check out my other sales. I can combine shipping to reduce your costs. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- About Camera Sanctuary: Like you, I love cameras. I bring all manner of equipment into the Camera Sanctuary in the hope that I can place it in a new home. I handle everything from collector’s pieces to total beaters, Leica to Lomo, Alpa to Argus. You can buy from me secure in the following: - My descriptions are honest. Some cameras have been babied, and some have been brutalized. There’s room in the world for both, but I won't try to sell one as the other. - I won’t pretend I don’t know things. - I’ll take back anything that doesn’t meet your expectations. -------------------------------------------------------------------------------------------------------------------- Please note that orders shipped outside the EU may be subject to fees and duties that are your responsibility. From January 1, 2021, will collect VAT from buyers in the United Kingdom.

Canon IXUS 40 4.0MP Digital Compact Camera + Manual + Charger - Very Good. Everything depicted in the pictures is included. Envoi rapide et soigné. Fast and careful shipping. --- Retours Gratuit En cas de retour, tous les objets doivent être retournés dans le même état. Toutes les demandes de retour doivent être faites dans les 14 jours qui suivent la livraison. Veuillez nous contacter avant toute demande de retour. -------------------------- Return if buyer outside of France In case of a return, all items must be returned in the same condition they were received. All return requests must be done within 14 days following delivery. Please contact us before any return request. Return costs are paid by the buyer. -------------------------- Attention Only for International Buyers (UK included and Non-European buyers): Customs duties, import taxes, and other costs/taxes due to importation are neither included in the sale price nor in the shipping costs. These taxes/duties/costs are the responsibility of the buyer. Please check the rules that apply to your country with your local customs office to evaluate import costs before buying. As we are based in France, there are no duties on orders within the European Union. En savoir plus Collaboration commerciale.

This little accessory adds manual shutter speed control to your OM10. Tested, working. I can combine shipping to reduce your costs. If you make multiple purchases at same time, I will refund you the excess shipping. ------------------------------------------------ About Camera Sanctuary: Like you, I love cameras. I bring all manner of equipment into the Camera Sanctuary in the hope that I can place it in a new home. I handle everything from collector’s pieces to total beaters, Leica to Lomo, Alpa to Argus. You can buy from me secure in the following: - My descriptions are honest. Some cameras have been babied, and some have been brutalized. There’s room in the world for both, but I won't try to sell one as the other. - I won’t pretend I don’t know things. - I’ll take back anything that doesn’t meet your expectations. ----------------- Please note that orders shipped outside the EU may be subject to fees and duties that are your responsibility. En savoir plus Collaboration commerciale.

Here we have a beautiful example of Nikon's iconic fast fifty. This is the "S·C" version, which as far as I know was only made in the pre-Ai F mount. This lens does have an Ai mount, so it was presumably modified at some point: the conversion is expertly done, perhaps by Nikon itself (I think you could send in your pre-AI lenses for modification for a while). It will now work with modern Nikon SLRs and DSLRs.  Anyway, this lens is in excellent condition. Glass is clean and clear, no fungus, no haze. There is a tiny mark on the rear element (visible in the second photo) but otherwise the glass appears pristine and unmarked. Iris blades are clean and snappy. Aperture selector moves nicely, focus is even. Includes original front and rear caps (the classy old Nippon Kogaku type that feel like bakelite) and the lens's HS-1 hood.  Be sure to check out my other sales. I can combine shipping to reduce your costs. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- About Camera Sanctuary: Like you, I love cameras. I bring all manner of equipment into the Camera Sanctuary in the hope that I can place it in a new home. I handle everything from collector’s pieces to total beaters, Leica to Lomo, Alpa to Argus. You can buy from me secure in the following: - My descriptions are honest. Some cameras have been babied, and some have been brutalized. There’s room in the world for both, but I won't try to sell one as the other. - I won’t pretend I don’t know things. - I’ll take back anything that doesn’t meet your expectations. -------------------------------------------------------------------------------------------------------------------- Please note that orders shipped outside the EU may be subject to fees and duties that are your responsibility. From January 1, 2021, will collect VAT from buyers in the United Kingdom.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) k63 MINIWATT COPPER ANODES IN LONG GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES F6A4 code 10,9/12,0 (20,1/21,9) 12,7/12,4 (23,0/22,9) 102/111 114/108 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES F6K45 code 13,3/14,9 (23,8/24,9) 114/119 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) MAZDA BLACK PLATE X SPACER U FIN FOIL GETTER SMOKED GLASS (pieces of glue moving inside the base) 41mA/15,8mA 80 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg2=265V Vg1=-13.5V Ia=100mA S=11mA/V HICKOK TV7D/U (6CA7 tube) HS5-3481 B25 D min=30 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) TESLA DOUBLE SUPERPOSED RING GETTER U FINS BLACK BASE 10 SPIKES TOP MICA NO SPIKES BOTTOM MICA 97mA/86mA S=11 94mA/83mA S=11 47 47 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg1=-13,5V Ia=5mA HICKOK TV7D/U FR3-2040 B29 B min=36 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) MAZDA BLACK PLATE SILVER STAPPLES BIG TOP SPACERS FOIL GETTER 4,5mA 4,4mA 69 70 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) VISSEAUX BLACK RIBBED PLATE 2 STRAIGHT FINS LONG D-TOP GETTER BLACK METAL BASE 53mA/24,8mA 51mA/21,5mA 72 74 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) K1E RCA BLACK RIBBED PLATE SYMETRICAL U FINS D GETTER 39mA/13,7mA 80 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC T(Va=150V Vg1=-1V Ia=18mA) P(Va=250V Vg2=110V Vg1=-0,9V Ia=10mA) HICKOK TV7D/U EV9-1080 B16 C min=57 EV2-6370 B15 B min=57 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) 4X2 SIEMENS SIEMENS MADE ≠9K code 1 LARGE ARM +1 COPPER ANODES 2 RIBS ON 2 HOLE GREY PLATE 18,1/13,0mA 18,2/13,7mA 104/+ 108/+ 4X2 SIEMENS SIEMENS MADE ≠9K b'&' ≠0B code 1 LARGE ARM +1 COPPER ANODES 2 RIBS ON 2 HOLE GREY PLATE 18,7/11,5mA 18,4/10,7mA 108/+ 102/+ CHOOSE THE PAIR YOU WANT... EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) MINIWATT GREY RIBBED PLATE SYMETRICAL U FINS D GETTER SHORT BASE 55mA/24,2mA 90 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg1=-13,5V Ia=5mA HICKOK TV7D/U FR3-2040 B29 B min=36 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) VISSEAUX BLACK/METAL PLATE COPPER STAPPLES FOIL GETTER 6,0mA 79 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) k64 MINIWATT SILVER ANODES IN LONG GREY RIBBED PLATES ROUND SIDE HOLE SMALL RING GETTER F8H4 8,1/10,0 (16,4/17,8) 76/84 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) k63 MINIWATT COPPER ANODES IN LONG GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES F6A4 code 10,9/12,0 (20,1/21,9) 12,7/12,4 (23,0/22,9) 102/111 114/108 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) NATIONAL UNION SQUARE FIN DARK GLASS 45mA/18,9mA 77 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) Gf2 MINIWATT Dario COPPER ANODES IN SMALL RIBBED PLATES DOUBLE LARGE ARMS RING GETTER F1F3 code 12,9/13,7 (22,6/23,8) 103/105 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) MAZDA GREY RIBBED PLATE UNSYMETRICAL U FINS D GETTER METAL BASE 43mA/16,3mA 82 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg1=-13,5V Ia=5mA HICKOK TV7D/U FR3-2040 B29 B min=36 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) VISSEAUX BLACK PLATE COPPER STAPLES FOIL GETTER 3,5mA 72 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) ue MAZDA Long flat plates, ring getter telefunken bottom code 10,3/10,4 (20,4/20,5) 110/110 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) RCA BLACK RIBBED PLATE DOUBLE D-GETTER SMOKED GLASS BROWN BASE 50mA/22,2mA 89 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) Gf0 RTC GREY RIBBED PLATES SILVER ARM 45° CLOSE RING GETTER D43 code 9,6/9,6 (17,8/17,8) 90/90 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V b'&' (-5V) Ia=10,5mA b'&' (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93) EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES F6K45 code 13,3/14,9 (23,8/24,9) 114/119 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC T(Va=150V Vg1=-1V Ia=18mA) P(Va=250V Vg2=110V Vg1=-0,9V Ia=10mA) HICKOK TV7D/U EV9-1080 B16 C min=57 EV2-6370 B15 B min=57 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) 4X2 SIEMENS SIEMENS MADE ≠9K b'&' ≠0B code 1 LARGE ARM +1 COPPER ANODES 2 RIBS ON HOLE GREY PLATE 18,7/11,5mA 18,4/10,7mA 108/+ 102/+ EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) S6E RCA BLACK RIBBED PLATE SYMETRICAL U FINS D GETTER 39mA/13,5mA 40mA/14,3mA 88 81 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

TESTS CONDITIONS (datasheet) RADIOELEC DUOVAC Va=250V Vg2=250V Vg1=-12,5V b'&'-20V Ia=45mA b'&' 17,5mA HICKOK TV7D/U HS5-3481 B21 C min=46 Please note that HICKOK is not a laboratory tester, though it is very well calibrated... HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values... 0.6 (065-0.72) --b'>'0.65V; 1.1 (1.06-1.16) --b'>'1.14V; 1.5 (1.26-1.42) --b'>'1.30V; 2.0 (1.90-2.10) --b'>'1.95V; 2.5 (2.56-2.88) --b'>'2.77V; 3.0 (3.25-3.60) --b'>'3.25V; 4.3 (4.30-4.75) --b'>'4.55V; 5.0 (5.15-5.68) --b'>'5.49V; 6.3 (6.20-6.80) --b'>'6.47V; 7.5 (7.32-8.10) --b'>'7.45V; 10 (9.60-10.80) --b'>'10.03V; 12.6 (12.1-13.3) --b'>'12.25V; 20 (19.0-21.0) --b'>'20.50V; 25 (25.3-28.0) --b'>'27.65V; 35 (35.2-39.0) --b'>'38.09V; 50 (51.5-57.0) --b'>'52.80V; 75 (74.0-82.0) --b'>'74.82V; 117 (115-127) --b'>'116.5V If needed, i can share all other tests calibrations I get (129.5V/130V +o-3V; 41.35V/40V +o-2V; 4.21V/4V +o-1V; 56.5V /56V....) BELVU GREY RIBBED PLATE UNSYMETRICAL U FINS D GETTER 42mA/15,0mA 87 EUROPE COUNTRIES --b'>' ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE) MY ALL STOCK IS NOT ONLINE...DON'T HESITATE TO ASK IF YOU NEED OTHER PARTICULAR TUBES... En savoir plus Collaboration commerciale.

LCD LED Projector Home Cinema Theater Multimedia utilisé 1 fois,comme neuf dans sa boîte offert a un anniversaire, j en ai déjà un de meilleurs qualité,. complet dans sa boite d origine, attention prise américaine, ne contient pas d adaptateur français Merci de lire attentivement les carateristiques du produit L'annonce EST SUFFISAMENT CLAIRE POUR Qu'Il N'Y EST AUCUNE MEPRISE VOUS ACHETEZ EN CONNAISSANCE DE CAUSE AUCUN RETOUR POSSIBLE si votre Pays ne figure pas dans la liste nous contacter avant achat ou enchère. LIVRAISON UNIQUEMENT VIA MONDIAL RELAY!! En Europe, la livraison à domicile est possible pour les pays suivants*: la Belgique, le Luxembourg, l’Espagne, le Royaume-Uni, l’Allemagne, l’Autriche, le Portugal, l’Italie, les Pays-Bas *à l’exception des îles et des enclaves (ex: Andorre, Jersey, Le Vatican…) Spécification: 1. Image: LCD 2. lampe: LED 4. Résolution de sortie: 320 * 180 5. Résolution d'entrée 1080p (MAX) 6. Contraste: 500: 1 7. Taille de l'image: 13-60 pouces 8. Distance du projet: 0.5-2.5m 9. Rapport d'aspect: 4: 3/16: 9 10. Terminal d'entrée: AV USB TF HDMI 11. Terminal de sortie: HAUT-PARLEUR / HEADPHONE 12. Consommation électrique: 15W max 13. Alimentation: 12V 1.5A 14. Système: Système multimédia 15. Autre: batterie Li-ion 7,4V 1000mAh en option (non fournie) 16. Accessoire: adaptateur secteur / manuel d'utilisation / câble AV / télécommande 17. taille: 117mm * 84mm * 43mm Emballage inclus: 1 x projecteur UC18 400lm 1080p 1 x câble AV 1 x télécommande 1 x prise américaine 1 x manuel de l'utilisateur 1080P LCD LED Projector Home Cinema Theater Multimedia VGA USB SD HDMI never been used still new in box Specification: 1. Image Uint: LCD 2. Lamp: LED 4. Output Resolution: 320*180 5. Input Resolution 1080p.(MAX) 6. Contrast: 500:1 7. Picture Size: 13-60Inches 8. Project Distance: 0.5-2.5m 9. Aspect Ratio: 4:3/16:9 10. Input Terminal: AV USB TF HDMI 11. Output Terminal: SPEAKER/HEADPHONE 12. Power Consumption: 15W max 13. PowerSupply: 12V 1.5A 14. System: Multimedia system 15. Other: Optional 7.4V 1000mAh Li-ion battery(not included) 16. Accessory: Power adaptor/User manual/AV cable/Remote control 17. Size: 117mm*84mm*43mm Package included: 1 x UC18 400lm 1080P Projector 1 x AV Cable 1 x Remote Controller 1 x US Plug Power 1 x User Manual if your Country is not listed contact us before purchase or auction. Any accepted delivery can not be the subject of a dispute DELIVERY ONLY VIA MONDIAL RELAY !! In Europe, home delivery is possible for the following countries *: Belgium, Luxembourg, Spain, the United Kingdom, Germany, Austria, Portugal, Italy, the Netherlands * with the exception of islands and enclaves (eg Andorra, Jersey, Vatican...)