High peak tente

Platine à cassette double d'AIWA, AD-WX 999 à vendre, platine à cassette double d'AIWA, AD-WX 999 modèle haut de gamme de la marque, Avec suppression du bruit Dolby B/C et HX Pro, options de réglage et de transfert diverses et variées (également possibles entre elles, car les deux magnétophones peuvent enregistrer en même temps, et double auto reverse ! Avec télécommande ! En complet état de marche à nettoyer. Serial Number: P91026011 ------------------------------------------------------------------------------------------------------------------------------------------------ The Aiwa AD-WX999 is a auto-reverse stereo double cassette deck with Dolby B noise reduction, it was introduced by Aiwa in 1992 and discontinued a year later. The main features of the Aiwa AD-WX999 are:, electronic tape counter with 4 digits, tape type selection with support for normal, chrome and metal tapes, belt driven auto reverse transport. Typical front loading double cassette deck with the cassette compartiment located on both sides of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the AD-WX999 are generic digital peak reading meters. Full-logic transport controls used on the AD-WX999 let it respond to the slightest finger contact for fast and effortless transport function selection. The Dolby-B system reduces tape hiss on tapes recorded on the AD-WX999 by as much as 10 dB at the highest frequencies. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. --------------------------------------------------------------------------------------------------------------------------------------- Aiwa AD-WX999 Double Cassette Deck (1989-93) Specifications: Type: auto reverse, double compact cassette deck, double record deck Track System: 4-track, 2-channel stereo Tape Speed: 4.8 cm/s Heads: 2 x playback/record, 2 x erase Tape Type: type I, CrO2, Metal Noise Reduction: B, C Headroom Extension: HX Pro Frequency Response: 20Hz to 18kHz  (Metal tape) Signal to Noise Ratio: 78dB  (dolby C) Wow and Flutter: 0.055% Dimensions: 16-15/16 x 5-9/16 x 12-3/8 inches Weight: 11.9lbs Finish: black Accessories: remote control Year: 1989

CARTE MERE / CARTE DE GESTION CV3683H-A50 POUR HIGH ONE HIGHONE HI5502UHD-MMET AUTRES n° ID: PE38 COMPATIBLE AVEC D'AUTRES MODÈLES DE TV (MERCI DE VÉRIFIER LA COMPATIBILITÉ AVEC LES PHOTOS) PRODUIT ORIGINAL ISSU D'UNE TV HIGH ONE DALLE CASSÉE TOTALEMENT FONCTIONNEL les produits neuf et d'occasions sont testés et verifiés avant envoi et conforme à la description de l'annonce Pour les règlements par chèque un délai de 10 jours ouvrés entre l'encaissement et la livraison du produit sera respecté afin de vérifier sa solvabilité. ATTENTION: tout nos produits sont référencés, enregistrés et archivés soit par une identification constructeur (numéro de série, code QR, numéro de pièce, etc...) soit par un code propre à notre entreprise apposé sur ou à l’intérieur du produit. Ceci afin de nous permettre de les identifier. Lors d'un retour éventuel de produits ces références ne devront pas avoir été modifiées, enlevées ou illisibles pour pouvoir traiter votre demande. Au cas où cela serait le cas nous ne pourrions procéder à aucune indemnisation de quelques nature que ce soit (remboursement, échange, etc). Il en va de même si nous constatons qu'un produit a été ouvert, démonté, ou tenté d'être réparé avant son retour. Merci de votre compréhension En cas de problème sur les produits d'occasions (cela peut arriver) avant tout renvoi de produit ou toute mauvaise évaluation merci de nous contacter. Si le problème indiqué est avéré, après retour du produit et vérification que le produit retourné soit bien celui qui a été expédié, nous procèderons au remboursement total ou partiel du produit ou à l'échange selon nos possibilités de stock. toute demande de retour doit s'effectuer dans les sept (7) jours qui suivent la réception du produit. Date de suivi de la poste faisant foi. Les frais de retour sont toujours à la charge du client sauf erreur d'envoi de produit de notre part. Exemple: commande d'un produit Samsung reçu un produit Asus les produits vendu pour la pièce / hs / cassé ne bénéficient, quand à eux, d'aucune possibilités de retour. Le client achète les produit de cette catégorie en connaissance de cause et aucune réclamation ne sera admis sur cette catégorie Cependant, la description de l'annonce permettra au client d'avoir une idée précise du dommage sur ce type de produit et permettra un achat en toute connaissance de cause En savoir plus Collaboration commerciale.

Great power amplifier High End PARASOUND HCA-2200 II. Ultra High Current John Curl Designed - Made in USA / 1994 Links https://parasound.com/vintage/hca2200.php https://audiokarma.org/forums/index.php?threads/parasound-hca-2200-vs-2200ii.499259/ http://www.audioreview.com/product/amplification/amplifiers/parasound/hca-2200ii.html Second owner, in perfect working order - bias current set Condition: 7,5 / 10 = Good / Very Good ; Minor Flaws Elsewhere, Minor Scratches - Used but Cared For Owner’s manual (pdf) Included is A.C Power Cable (length 1,8 meters) size 482 front x 200  height x 482 mm deep - Weight 60, Lbs (27, 215 kg) solid shipping with insurance value 1000 € the european shipping rate indicated is an average cost Contact me before purchase please SHIPPING INFORMATION ALL POSTAGE PRICES ARE ESTIMATES – FINAL POSTAGE PRICE DEPENDS ON BUYER LOCATION AND FINAL VALUE INSURANCE Livraison France UPS standard / assurance 1000 € Specifications Continuous Power Output - Stereo 220 watts RMS x 2, 20Hz-20kHz, 8Ω 385 watts RMS x 2, 20Hz-20kHz, 4Ω 385 watts RMS x 2, 20Hz-20kHz, 2Ω Continuous Power Output - Mono 750 watts RMS, 20Hz-201kHz, 8Ω 1000 watts RMS, 20Hz-20kHz, 4Ω Current Capacity 50 amperes continuous 90 amperes peak Slew Rate >135V/μsecond Frequency Response 2Hz-95kHz, +0/-1.5dB Total Harmonic Distortion TIM Unmeasurable IM Distortion Dynamic Headroom > 1.5dB lnterchannel Crosstalk > 84dB at IkHz > 74dB at 20kHz lnput lmpedance 100KΩ/RCA-unbalanced, 200KΩ/XLR-balanced S/N Ratio >114dB, input shorted, IHF A weighted Damping Factor > 1000 at 20Hz Dimensions 19" wide x 7" high x 15" deep Weight 60 Ibs. net AC Power Requirements 1000 watts

CAN-USB PEAK. daptateur USB (mode Full-Speed, compatible avec USB 1.1, USB 2.0 et USB 3.0) 1 bus CAN haute vitesse (High Speed) (ISO 11898-2) Vitesse de transfert de 5 kbit/s jusqu‘à 1 Mbit/s Résolution de env. 42 µs pour l‘horodatage Conforme aux spécifications CAN 2.0A (ID 11 bits) et 2.0B (ID 29 bits) Connexion au bus CAN par connecteur D-Sub, 9 broches (selon CiA ® 303-1) Contrôleur CAN NXP CAN SJA1000 doté d'une fréquence d'horloge de 16 MHz Emetteur-récepteur CAN NXP PCA82C251 Séparation galvanique au connecteur CAN jusqu‘à 500 V (uniquement pour IPEH-002022) La terminaison CAN peut être activée via un cavalier soudé Possibilité de relier une alimentation de 5 volts au niveau de la connexion CAN par cavalier brasé p.ex. pour un convertisseur externe Alimentation par le bus USB Plage de températures en fonctionnement étendue, de -40 à 85 °C

Enceintes Hi-Fi d’excellente qualité, marque réputée auprès des connaisseurs audiophiles.  Retranscription du son haut de gamme, la renommée Tannoy n'est plus à faire. Achetées en 1988 (facture à l’appui) elles sont en excellent état, les boiseries sont parfaites j'en ai pris grand soin. Le prix est pour l'ensemble soit: Les deux enceintes avec leurs supports/pieds Haute Fidélité. Pas d’envoi à venir chercher sur Paris. Idem au modèle Stirling Technical Specifications Power Rating 75W RMS, 150 Peak Amplifer Rating 20 to 100W RMS per channel, 8 Sensitivity 90dB for 1 watt at 1 metre. (Anechoic,4PI environment) Maximum SPL 109dB at 1m for 75W, 112dB at 1m for 150 peak Ompedance 8 Nom./ 6 Min. Frequency vs SPL 45Hz-20kHz  3dB (Port Open) Phase Response 120Hz – 10 kHz  25 Time Compensation   30Secs, 120Hz – 10khz Dispersion 90incl.angle, hor.and vert. for  6dB at 10 kHz Crossover Frequency 1.8kHz Crossover Control Constant impedance attenuator from  to +4dB, 2kHz to 20kHz Crossover Type Hard wired passive low loss time comp. Type 1052 Driver Type Dual Concentric, High Compliance Type 2008C Distorsion 0,5% third harm. For 90dB at 1 metre Enclosure Type Variable distributed port system Enclosure Volume 40 litres Enclosure Dimensions 580H x 380W x 275D (22.8“x 15“x 10.8“) Enclosure Weight 15Kg Enclosure Material Solid walnut with high density particle board Grille Metal  Specially woven cloth over wood frame  Low Frequency Radiator Nominal diameter 200mm, 8” Voice coil diameter 44mm, 1.7” Free air resonance 35Hz Total Q 0,47 High Frequency Compression Driver Diaphragm diameter 17mm, 0.7” Voice coil diameter 16mm, 0.6” Horn lower cut off freq 800Hz

Haut parleur 15" Selenium  15 PW3 SLF en bon état. Le cône est un peu enfoncé mais non percé et cela ne gène en rien son fonctionnement. Professional 15” woofer designed to meet a variety of PA needs for small and medium-sized rooms, with excellent performance in the mid and low frequency ranges.For sound reinforcement in nightclubs, dancing halls, auditoriums, bands and also for studio monitors.Its great efficiency in sound reproduction is due to the excellent combination of the different components:- The light cone manufactured with long fiber pulp together with a surround of impregnated fabric give the array great stability, high yield and low distortion.- The voice coil is made of high temperature wire, wound on ® Kaptonformer.- The epoxy painted reinforced steel frame provides thearray with high mechanical resistance.- The aluminum dust cap guarantees great voice coil heat dissipation.- The use of highly resistant adhesives guarantees optimal cohesion and durability of components.*15PW3-SLF: Product with black dull finished dust cap and without Selenium logo printed on it. SPECIFICATIONSNominal diameter.............................380 (15)mm (in)Nominal impedance..................................8ΩMinimum impedance @ 160 Hz.......................6.8ΩPower handling1Musical Program............................500W2AES......................................250WSensitivity (2.83V@1m) averaged from 100 to 2,000 Hz...98dB SPLPower compression @ 0 dB (nom. power)..............4.1dBPower compression @ -3 dB (nom. power)/2............2.5dBPower compression @ -10 dB (nom. power)/10..........0.6dBFrequency response @ -10 dB................40 to 4,000Hz12 AES Standard (60 - 600 Hz).THIELE-SMALL PARAMETERSFs...............................................37Hz3Vas........................................274 (9.67)l (ft)Qts.............................................0.61Qes............................................0.68Qms............................................5.81ηo (half space)...................................2.00%2 2Sd....................................0.08605 (133.4)m(in)3 3Vd (Sd x Xmax)...........................258.2 (15.76)cm(in)Xmax (max. excursion (peak) with 10% distortion)...3.0 (0.12)mm (in)Xlim (max.excursion (peak) before physical damage).9.5 (0.37)mm (in)Atmospheric conditions at TS parameter measurements:Temperature...................................27 (81)°C (°F)Atmospheric pressure............................1,000mbHumidity..........................................43%Thiele-Small parameters are measured after a 2-hour power test using half AES power. A variation of ± 15% is allowed.ADDITIONAL PARAMETERSβL.............................................12.3TmFlux density.....................................1.15TVoice coil diameter.............................60 (2.4)mm (in)Voice coil winding length......................17.5 (57.4)m (ft)Wire temperature coefficient of resistance (α25).....0.003681/°CMaximum voice coil operating temperature........215 (419)°C (°F)θvc (max.voice coil operating temp./max.power)..0.86 (1.68)°C/W(°F/W)Hvc (voice coil winding depth).................14.0 (0.55)mm (in)Hag (air gap height)...........................8.0 (0.32)mm (in)Re..............................................6.3ΩMms.....................................71.2 (0.157)g (lb)Cms...........................................265.3μm/NRms.............................................2.8kg/sNON-LINEAR PARAMETERSLe @ Fs (voice coil inductance @ Fs)...............2.475mHLe @ 1 kHz (voice coil inductance @ 1kHz)...........0.929mHLe @ 20 kHz (voice coil inductance @ 20 kHz)........0.384mHRed @ Fs.......................................0.11ΩRed @ 1 kHz.....................................2.31ΩRed @ 20 kHz..................................36.56ΩKrm...........................................0.728mΩKxm..........................................12.311mHErm...........................................0.922Exm.....

PIONEER CT-656 STEREO CASETTE DECK 3 TETE SYSTEM DOLBY HX PRO PARFAIT ETAT.. État : "Occasion" Longeur 42cm. Largueur 30cm. Hauteur 13cm. Fonctionne parfaitement testé Si questions ou autres photos me contacter Emballé avec soins et rigueur eur hors france me contacter notice trouvable facilement sur internet. PIONEER CT-656 High end tape deck with 3 head technology Vintage cassette deck from the top brand Pioneer High quality. PIONEER CT-656 High end tape deck with 3 head technology Vintage cassette deck from the top brand Pioneer High quality workmanship and excellent fine Technology from the hifi heyday The optical condition is very good and well maintained! Small signs of use available! Technically, the tape works flawlessly! 100% at work! Technical specifications: connections Line (input): high level (LINE) 56 mV / input impedance: 56 kOhm Line (output): high level (LINE) 316 mV / output impedance: 5 kOhm Headphones: load impedance 8 ohms (volume max.) Technical specifications Tape heads: 3 PC-OCC-winding-hard-permalloy playback head / hard-permalloy-recording head combination x1 Erase head (ferrite) x 1 Motors: 2 1 x DC servo capstan motor, 1 x DC coil motor Wow and Flutter: 0.05% WRMS Belt types: Normal Type-I, Cromdioxide Type-II, Metal Type-IV Frequency response (+/- 6 dB): Normal band 15 to 20,000 Hz Chrome band 15 to 20,000 Hz Metal band 15 to 21,000 Hz Distortion factor: less than 0.7% (0 dB) S / N ratio Without Dolby:> 58 dB With Dolby B: + 10 dB (at 5 kHz) With Dolby C: + 19 dB (at 5 kHz) Auto reverse: no Track search: ± 15 tracks Dolby noise reduction: B + C MPX filter: Yes Fader: No. Pitch control: No. CD synchro recording: Yes (CD deck synchro with suitable Pioneer CD player) Special equipment Counter with two display modes (4-digit electronic counter) Level display switchable (normal / extended modulation range) Rear tape control option (automatic switching between sound source and recorded sound) Track search (+/- 15 tracks) Headphone output (with level control) Bias controller MPX filter Record mute to automatically insert spaces Automatic tape type selector Timer start function for recording and playback Repeat playback Dolby Noise Reduction System (B / C) Dolby HX Pro FL level meters (12 segments +1) with peak level memory funct Scope of delivery: 1 x CT-656 1 x English instruction manual 1 x TDK SA-C90 used 1 x professional packaging

Integrated stereo amplifier Rated continuation average output (Both channel operation, 20Hz - 20kHz) 220 W/ch (4ohms) 170 W/ch (8ohms) THD (both channel operation) 0.02% (4ohms - 16-ohm load) IM distortion 0.01% Frequency response Main amp input: 20Hz-20kHz+0 -0.2 dB (at the time of a rated continuation average output) 2Hz-150kHz+0 -3.0dB (at the time of 1W output) High Level input: 20Hz-20kHz+0 -0.2 dB (at the time of a rated continuation average output) Dumping factor 120 (8-ohm load, 50Hz) Input sensitivity/impedance (An Output power / EIA1W output) High Level input: 147mV/11.2mV/20kohm Balanced input: 147mV/11.2mV/40kohm Main input: 1.47V/112mV/20kohm An Output power/impedance Pre output: 1.47V/50 ohm (at the time of a rated continuation average output) Gain: Main input -> output: 28dB / High Level input -> Pre output: 20dB S/N, input conversion noise Input short-circuit and A-compensation EIA S/N At the time of a rated input S/N Input conversion noise Main amp input: 127dB -123dBV 103dB High Level input: 113dB -130dBV 82dB Balanced input: 90dB -108dBV 82dB Tone control Low-pitched sound (300Hz): ±10dB (50Hz) Loud sound (3kHz): ±10dB (20kHz) Loudness Compensation + 6dB (100Hz, Volume -30dB) Power meter Logarithm compression type peak level display dB scale and the output Direct reading at the time of 8-ohm load Load impedance 4ohm-16ohm Headphone jack Conformity impedance: 4ohms - 100ohms Power source AC230V, 50Hz/60Hz Power consumption 55W (at the time of no inputting) 350W (Electrical Appliance and Material Control Law) 585W (at the time of an 8-ohm load Output power) The maximum Dimensions Width 475x height 180x depth of 423mm Weight 23kg Attachment: Remote commander RC-20 Remote control system Infrared pulse system Power source DC 3V Battery AA type (SUM-3/R6) two pieces The maximum Dimensions Width 55x height 194x depth of 18mm Weight 100g (Battery includeded)

This amp was built 9-8-2011 and is a 50 watt solid state rectified V3. The Two Rock Custom Reverb Signature V3 is a versatile two channel amplifier from boutique makers Two Rock. The Custom Reverb has always been a culmination of everything Two Rock creators Bill & Joe have learned since day one. Version 3 adds a new loop and Contour controls to this classic design. The Custom Reverb V3 has two distinct channels Clean and Lead, the Clean Channel is the classic pure Two Rock tone with endless depth and headroom. If you are looking for the famous John Mayer clean tone - this is it. The Lead channel has a superb warmth to it and the various controls on the V3 allow you to tweak and refine the sound to your perfect tone. Two Rock use carefully selected components and a hand built approach to craft some of the finest quality amplifiers we have come across. Just taking a peak inside the chassis is a lesson in what true craftsmanship is. The Custom Reverb V3 has an extensive range of controls giving you total control over it superb tone. The Custom Reverb V3 is an amp you can really sit down with and spend hours discovering new tones and subtle variations but the core sound is always pure and true to you. Custom Reverb Signature V3 ControlsTreble Control - Adjusts the high frequency response. In the full counter-clockwise position, high frequencies are bypassed to ground. In the full clockwise position, high frequencies are allowed to pass to the next gain stage. Bass Control - Adjusts the bass response. In the full counter-clockwise position, low frequencies are cut. In addition, the response of the treble and mid-range controls is greatly reduced. In the full counter-clockwise position, low frequencies are allowed to pass to the next gain stage. Mid Switch - Boosts the mid range frequency responseDeep Switch - This is a low frequency contou Features & details Two Channels of Classic Two Rock Tone Beautiful Pure Clean Channel New Lead Channel Switchable Half / Full Power Tube Rectification Mint like new Head is sell without the footswitch contact me before if you want it

Sony Alpha A7R III 42,4 Mpix Appareil Photo Numérique Hybride - Sous guarantie et presque neuf. État : "Occasion" 2 cartes memoires de haute vitesse et Smallrig L-bracket inclus. Pas inclus est le Peak Design Slide qui est monte dans la photo. Sony Alpha A7R III 42.4 MP, Mirrorless camera - under warranty and almost new. Condition: Used. Includes 2 high speed 64GB memory cards and Smallrig L-bracket. Not included are the Peak Design straps that are shown in the image.

AKAI AMX6 Mélangeur De Puissance AMP. 1 - HI/MID/LOW EQUALIZER: Powerful 15dB boost or cut allows you to tailor the sound of each individual channel so the instrument blends more naturally in the mix. The HIGH EQ is a 12 kHz shelving type to add or cut b'"'sizzleb'"'. MID has a center frequency of 1.2 kHz, approximately in the vocal range. The LOW EQ is an 80 Hz shelving type, around the kick-drum frequency. 2 - EFFECT SEND (REV/FX): Controls the level of the signal sent to the internal digital effects and the FX SEND bus. This control comes after the LEVEL control, so the signal sent to internal or external effects will also be affected by changes in the LEVEL setting. 3 - MONITOR: Controls the level of the signal sent to the MONITOR bus and MONITOR OUT jack. This control is independent of the LEVEL control and is not affected by it. This means you can create a completely separate mix for on-stage monitoring. 4 - LEVEL: Controls the level of the input signal sent to the MAIN bus. Generally used for creating the mix sent to the audience. 5 - LINE/MIC INPUTS (Channels 1-4): Use the LINE input for instruments that provide line level signals such as synthesizers or drum machines. Use the MIC input for low level signal sources such as microphones. +48V phantom power is available for use with condenser microphones. You can also use both LINE and MIC inputs simultaneously for each channel. 6 - LINE/MIC INPUTS (Channels 5-6): LINE input functions as channels 1-4. LINE/MIC input accepts both XLR and phone jacks. You can connect a stereo signal to both phone jacks (LINE and MIC/LINE) for summing to a mono signal. 7 - DIGITAL EFFECTS: A selection of 16 powerful digital reverb and delay effects to add extra ambiance to your music. A foot switch may be used to turn the digital effects on/off for dramatic sonic changes while playing, and the green indicator lights when the effects are on. 8 - PHANTOM: Turns +48V phantom power on/off for condenser microphones connected to the MIC inputs of channels 1-6. The green indicator lights when phantom power is on. 9 - FX SEND: Controls the combined level of signals sent from the FX SEND bus to an external effects processor connected to the FX SEND jack. This control has no effect on the signal level sent to the built-in digital effects. 10 - TAPE/AUX IN LEVEL: Lets you adjust the level sent to the MAIN bus from the TAPE IN/AUX IN connectors. 11 - MAIN/BRIDGED SECTION: Graphic equalizer +/-12dB 7-band graphic equalizer adjusts the EQ curve of the MAIN bus signal sent to the AMP 1 A/B speakers. Use it to compensate for poor acoustics in a hall or to prevent feedback. REV/FX: Adjusts the built-in digital effects level sent to the MAIN bus. Set to b'"'0b'"' (or use a foot switch) to turn effects off. LEVEL: Controls the output level of the MAIN bus signal sent to the MAIN OUT jack and the internal AMP 1. Peak level indicators: Provides visual indication of the signal level at the MAIN OUT jack and AMP 1 input. 12 - MONITOR SECTION: Graphic equalizer +/-12dB 7-band graphic equalizer adjusts the EQ curve of the MONITOR bus signal sent to the AMP 2 A/B speakers. Use it to compensate for poor acoustics in a hall or on stage, or to prevent feedback. REV/FX: Adjusts the built-in digital effects level sent to the MONITOR bus. Set to b'"'0b'"' (or use a foot switch) to turn effects off. LEVEL: Controls the output level of the MONITOR bus signal sent to the MONITOR OUT jack and the internal AMP 2. Peak level indicators: Provides visual indication of the signal level at the MONITOR OUT jack and AMP 2 input. 13 - MODE: Allows you to select signal routing to the internal amplifiers. MAIN TO AMP 1/MONITOR TO AMP: Gives you a 200 watts mono MAIN (audience) mix and a separate 200 watts mono MONITOR (on-stage) mix, without the need for any external amplifiers. MAIN TO AMP 1 b'&' 2: Allows you to send a 200 watts per channel, 2- or 4-speaker mono mix to the audience. You can also have a separate on-stage mix by connecting another amplifier En savoir plus Collaboration commerciale.

BOUTON POWER DVB-PK1430202 + INFRA-ROUGE DVB-PS13209HCA-06 POUR HIGH ONE HI5504UHD-MM ET AUTRES   n° ID : PE38 PRODUIT ORIGINAL ISSU D'UNE TV HIGH ONE DALLE CASSÉE TOTALEMENT FONCTIONNEL COMPATIBLE AVEC PLUSIEURS MODÈLES DE TV (MERCI DE VÉRIFIER LA COMPATIBILITÉ AVEC LES PHOTOS)   les produits neuf et d'occasions sont testés et verifiés avant envoi et conforme à la description de l'annonce Pour les règlements par chèque un délai de 10 jours ouvrés entre l'encaissement et la livraison du produit sera respecté afin de vérifier sa solvabilité. ATTENTION : tout nos  produits sont référencés, enregistrés et archivés soit par une identification constructeur (numéro de série, code QR, numéro de pièce, etc...)  soit par un code propre à notre entreprise apposé sur ou à l’intérieur du produit. Ceci afin de nous permettre de les identifier. Lors d'un retour éventuel de produits ces références ne devront pas avoir été modifiées, enlevées ou illisibles pour pouvoir traiter votre demande. Au cas où cela serait le cas nous ne pourrions procéder à aucune indemnisation de quelques nature que ce soit (remboursement, échange, etc). Il en va de même si nous constatons qu'un produit a été ouvert, démonté, ou tenté d'être réparé avant son retour. Merci de votre compréhension En cas de problème sur les produits d'occasions (cela peut arriver) avant tout renvoi de produit ou toute mauvaise évaluation merci de nous contacter. Si le problème indiqué est avéré, après retour du produit et vérification que le produit retourné soit bien celui qui a été expédié,  nous procèderons au remboursement total ou partiel du produit ou à l'échange selon nos possibilités de stock. toute demande de retour doit s'effectuer dans les sept (7) jours qui suivent la réception du produit. Date de suivi de la poste faisant foi. Les frais de retour sont toujours à la charge du client sauf erreur d'envoi de produit de notre part. Exemple:  commande d'un produit Samsung reçu un produit Asus les produits vendu pour la pièce / hs / cassé ne bénéficient, quand à eux,  d'aucune possibilités de retour. Le client achète les produit de cette catégorie en connaissance de cause et aucune réclamation ne sera admis sur cette catégorie Cependant, la description de l'annonce permettra au client d'avoir une idée précise du dommage sur ce type de produit et permettra un achat en toute connaissance de cause

2 enceintes basse-Reflex Klipsch RB61 couleur Cherry. très bonne enceinte, très dynamique avec une grosse présence dans le grave. SPECIFICATIONS FREQUENCY RESPONSE 43Hz-23kHz ± 3dB       POWER HANDLING 100W RMS / 400W Peak       SENSITIVITY 95dB @ 2.83V / 1m        NOMINAL IMPEDANCE 8 ohms compatible   HIGH FREQUENCY DRIVERS 1" (2.54cm)  Titanium diaphragm compression driver mated to 90˚x 60˚ square Tractrix® Horn       HIGH FREQUENCY CROSSOVER 2000Hz  LOW FREQUENCY DRIVERS 6.5" (16.5cm) Cerametallic™ cone woofer         ENCLOSURE TYPE Bass-reflex via front-firing port       HEIGHT 15.4" (39.1cm)      WIDTH 8.5" (21.6cm)      DEPTH 12.25" (31.1cm)      WEIGHT 22 lbs (10kg)       FINISH Cherry or Black Ash woodgrain vinyl

The Pioneer DJM-250 2-Channel DJ Mixer offers professional level functionality in an entry level mixer. Designed for the aspiring DJ, the DJM-250 offers versatile and plentiful connectivity in a compact form factor. The mixer features two dedicated CD player inputs as well as two switchable phono/line inputs. Three Aux inputs, consisting of two stereo pairs of RCA phono inputs and a 1/8" stereo input, allow alternate sources to be added into the mix. Each channel features a channel fader, 3-band isolator EQ, and Pioneer's Sound Color control which contours frequencies for realtime creative manipulation during sets. The DJM-250 crossfader curve is adjustable. The output section features balanced XLR and unbalanced RCA connectors for integration with any sound system. Sound Color Filter The Sound Color Filter adds performance-oriented high and low pass filtering in one knob. When turned to the left, the Sound Color Filter incrementally sweeps out the high frequencies. When turned to the right, it incrementally sweeps out the lows. The filter is independently controlled on each channel, allowing effected tracks to be combined. Indicator lights blink and display different colors depending on which way the Sound Color Filter is engaged, so you'll never forget it's on. Flexible and Plentiful Connectivity The DJM-250 includes four DJ multi-player and analog turntable inputs, three auxiliary inputs, and one microphone input. The mixer can be used to connect a variety of devices such as PCs, iPods, televisions, or synthesizers. The DJM-250 has XLR balanced outputs and unbalanced RCA phono outputs, offering easy connection to most amplification systems. Additional Functionality - Compatible with 48 kHz/24-bit full digital processing - 3-band isolator EQ per channel, -inf. to +9dB per band - Fader Start Play function connects Pioneer DJ players - Peak level meter displays audio input level for each channel - Three easily switchable crossfader curves

Condensateur polarisé électrochimique 15000 µF FELSIC Référence CO39 à grosse capacité de débit 100 Volts service 125 volts en pointe haute capacité d'intensité 14,8 ampères à 100 Hz Idéal pour les projets de filtrage d'alimentation de grosse puissance à courant continue Fabriqué par SIC SAFCO  Condensateur à connexion par cosse diam 5 mm poids 607 grammes Diamètre 7,2 cm Hauteur au ras des cosses 12,5 cm Electrochemical polarized condenser 15000 µF FELSIC  ref CO39 big high flow capability 100 Volts Service 125 volts peak High capacity intensity 14,8 amps at 100 Hz Ideal for power filtering projects of big power to direct current Manufactured by SIC SAFCO by Pod connection capacitor diam 5 mm weight 607 grams Diameter 7,2 cm Height flush spades 12.5 cm