Incomplete data in sample

Enregistreur 24 pistes Alesis HD24 multitrack recorder Parfait état 80 giga DD. Overview HD24 is the world's first 24-track hard disk recorder designed to fit into any ADAT environment and match ADAT's legendary performance and affordability. HD24 is built exclusively for the purpose of recording music instead of data, resulting in remarkable stability and performance. HD24 enables engineers to record up to 24 tracks of high-resolution 24-bit recording at 44.1 and 48 kHz sample rates. Two hot-swappable media bays provide convenient access to recording drives and allow data backup in minutes. You can edit tracks internally or easily transfer to computer via an Ethernet connection. HD24 features ADAT Optical and ADAT Sync, enabling it to work efficiently with existing systems. It offers the same exceptional user-friendly interface ADAT users have come to expect. HD24 can be upgraded to HR24XR with the EC2 module. This user-installable option replaces the A/D and D/A converters with the renowned AKM converters used in the acclaimed MasterLink. EC2 improves performance at all sample rates and also expands analog and digital-input compatibility to include 88.2 and 96 kHz sample resolutions. HR24 packs 24 channels of digital audio I/O into a single-unit recorder that easily fits into any environment. FEATURES - 24-track, 24-bit digital audio recording (12 tracks at 96kHz with EC2 optional updgrade) - 24 analog inputs (1/4" TRS) - 24 analog outputs (1/4" TRS) - 24-channel ADAT Optical I/O - Dual recording bays utilize standard, low-cost, removable IDE computer drives - Instant random access to audio using ADAT/FST™ (File Streaming Technology). - Internal editing capabilities include cut, copy, paste, and track-move with undo. - Multiple units can be synchronized to create a larger system - Easily integrated into an existing ADAT system - Ethernet port enables computer connection - MIDI I/O, MTC out - ADAT Sync in/out - Word Clock in SPECS MEDIA - Caddy 1: 260GB HD - Caddy 2: 80GB HD - Caddies can be fitted with IDE/EIDE/ATA drive at 5,400/7,200/10,000 RPM up to 2TB TRACK COUNT - 24 tracks at 24-bit, 44.1 or 48 - 12 tracks at 88.2 or 96 kHz with optional EC2 upgrade CONNECTIONS - Analog: 24 24-bit inputs, 24 24-bit outputs (1/4" TRS, +4dBu) - Digital: 24-channel I/O via 3 ADAT Optical inputs and 3 ADAT Optical outputs - Other: MIDI in/out. Alesis Sync in/out (DB-9). Word Clock input (BNC, 75). Footswitch jack for punch in/out (1/4"). LRC input for - traditional wired remote (1/4"). 10 Base-T Ethernet (RJ-45) AUDIO SPECS - Frequency response: 20Hz–20kHz +0/–1dB - Dynamic range: 103dB A/D, >103dB D/A (A-weighted) - Distortion: - Pitch control: +100 cents/–200 cents, min-max 30–50kHz (30–100kHz with version 2.0) POWER & DIMENSIONS. - Power: 90-230V AC, 60W - Dimensions (H x W x D): 5.09" x 19" x 17" (127mm x 483mm x 432mm), 3U rackmount - Weight: 20lbs (9.07kg)

Hifime UH1 Digital permet d'écouter de la musique en qualité (horloges TCXO, isolement galvanique) depuis un ordinateur via la sortie USB de celui-ci. La sortie HDMI I2S est compatible avec les 3D LAB Nano DAC. Entrées: optique, HDMI (I2S) et USB: un switch permet le choix entre Low (limite la fréquence à 96 kHz mais ne nécessite aucun driver sous windows) et High (driver windows 10 disponible sur le site de Hifime). Sorties: coaxial, optique, HDMI I2S compatible avec le 3D LAB Nano DAC. Un switch à 2 positions permet de rendre le DSD compatible avec plusieurs marques (pas essayé avec le 3D LAB). Spécifications (issues du site de Hifime): This is the UH1 without the DAC part. It is a pure high quality USB to i2s/DSD (over HDMI), COAX and OPT. This also has i2s/HDMI input (HDMI to USB). It is based on the Savitech SA9227 asynchronous USB receiver clocked by two TCXO oscillators which are used as the master clock to control the timing. This asynchronous USB transfer mode will give this device the responsibility to clock the data transfer instead of of your computer which has a clock of lesser quality with more noise and jitter introduced. It accepts up to 384kHz sample rates and 16/24/32 bit. No drivers are necessary on MAC and linux computers ! On Windows it can work without drivers up to 96kHz/24bit and with ASIO drivers up to 384/32. (Note that not all programs support ASIO). There is a switch that switches between Low and High sample rate mode. When set to Low, it works up to 96/24 with no drivers needed in Windows. It utilises the USB port for power, so no external power supply is required. Also the outputs and inputs are ground isolated from USB. USB INPUT: Asynchronous USB transfer with two TCXO as master clock USB receiver Savitech SA9227 Inputs are ground isolated from USB Supported sample rates: 32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8 and 384kHz Supported bitrates: 16, 24 and 32 bits Works in either Full speed or High Speed USB transfer mode selectable with a switch (“L” “H”). No drivers required in MAC/Linux in both full and high speed modes. Windows ASIO needs drivers for High Speed mode only. We are using two (expensive) TCXO to act as master clock. 45.1584MHz for 44.1, 88.2, 176.4, 352.8MHz sample rates, and 49.152MHz for 32,48, 96, 192, 384kHz sample rates. The USB transfer is clocked by the TCXO directly. This is better than PLL async mode and offers close to zero jitter. PLL async mode has ~30ps jitter, which is already quite low, but not as good as when clocked from TCXO directly. SPDIF/OPTICAL/i2s(HDMI) INPUT: To USB/computer only! It doesn’t convert i2s to the COAX/SPDIF outputs. SPDIF Support samples rates up to 192kHz and 16/24/32 bit. DIGITAL OUTPUTS: DSD/I2S using HDMI port. Here is a linked drawing with the pinout for DSD and I2s. Note – this it not compatible with “normal” HDMI devices. The HDMI port is only used as a convenient connector and a way to send i2s balanced which improves signal quality. The DSD signal is also balanced. The pinout is made so that there is no harm done if you should connect it to a normal HDMI device. Optical output Coaxial output? Outputs are ground isolated from USB Size: 85x70x24mm

Kurzweil Operating System 3.87J  (Janis) update kit for K2000 and K2000R  Version 3.87 is the latest and the Best Operating System version for K2000 series synthesizers.   You will receive: - two brand new EPROMS - (K2000J Eng HI  and K2000J Eng LO), corresponding to the Operating System version 3.87 for K2000 K2000R (Janis)  - integrated circuits extractor - antistatic wirst strap - phone or email support  Upgrading your K2000, K2000VP, or K2vx There are 2 different versions of the engine board and operating system - Calvin and Janis. If there is a "J" after the version number on the display on boot time, than you have a Janis unit, if there is no letter after the version number, you have a Calvin unit.                                                      Make sure to buy the right EPROM update kit corresponding to your board (Calvin or Janis) !!! Please note: If your K2000 system  directly from a version earlier than 2.0 (like 1.3 version) of the Kurzweil Operating System requires the additional purchase of new Setup EPROMs, which are NOT included with this operating system update kit but available on our shop.  K2000 Series - v3.87 Operating System New features and enhancements added when upgrading from version 3.54 - SCSI Speed Improvements. Now loads and saves twice as fast as previous versions. - Export to standard MIDI Type 1. Now the software can import and export both Type 0 and Type 1 MIDI files. - ISO 9660 format support. Adds ISO 9660 format support for CD's. This allows you to read CD's in the standard format. Previously we required an "image" of the hard disk format. - Supports looped WAV files, both import and export. Also correctly handles tuning of WAV and AIFF files. Saving a WAV file will now export the loop info, if any. Importing a looped WAV file will now get the loop data, if any. The software only handles one loop per sample, so the first loop found in a WAV file is used. - Now reads 2500 programs. Previously the 2000 would ignore programs containing 2500 specific parameters. Now it translates them, stripping out any KDFX or other 2500 parameters. - Improved object save and delete times. - Improved sample delete times.   New features and enhancements added when upgrading from version 3.01 or 3.18 All of the above, plus: - Eight 32-layer "drum" channels are now available. (PRAM option required). - A new option has been added for the sustain pedal (Program editor - LAYER page). When you select "On2," the sustain pedal will not catch the release of a note that is still sounding when the sustain message is received; this can be very useful in a program that uses amplitude envelopes with a long release time. - MIDI type 1 files can now be imported. - Verify option double-checks the data integrity of all your backup, copy, and save operations. - Info soft button on the Utilities page in Disk mode displays information about your disk drive(s). - Copy function now allows selection of multiple files. - You can now format multiple floppies without having to return to the initial Format command. - The K2000's SCSI subsystem has been enhanced to accept a greater variety of devices. In addition, the K2000 now supports disk drives of up to 2 Gigabytes (2048 Meg). V3.54 will work with drives larger than 2G but only the first 2 G will be utilized. (Drives larger than 1 gig will work externally, but are likely to draw too much power to be used internally. Please check our Hard Drive Compatibility List for power consumption specs. - Previous to v3.54, for the Backup and Copy functions, the combined size of both drives had to be under 1 gig unless PRAM was installed. This limitation no longer exists. - Compatibility with the PC Exchange program has been improved.   New features and enhancements added when upgrading from version 1 or 2 All of the above, plus: Version 3 operating s

Kurzweil Operating System 3.87C  (Calvin) update kit for K2000 and K2000R  Version 3.87 is the latest and the Best Operating System version for K2000 series synthesizers.   You will receive: - two brand new EPROMS - (K2000 Eng HI  and K2000 Eng LO), corresponding to the Operating System version 3.87 for K2000 K2000R (Calvin)  - integrated circuits extractor - phone or email support  Upgrading your K2000, K2000VP, or K2vx There are 2 different versions of the engine board and operating system - Calvin and Janis. If there is a "J" after the version number on the display on boot time, than you have a Janis unit, if there is no letter after the version number, you have a Calvin unit.                                                      Make sure to buy the right EPROM update kit corresponding to your board (Calvin or Janis) !!! Please note: If your K2000 system  directly from a version earlier than 2.0 (like 1.3 version) of the Kurzweil Operating System requires the additional purchase of new Setup EPROMs, which are NOT included with this operating system update kit but available on our shop.  K2000 Series - v3.87 Operating System New features and enhancements added when upgrading from version 3.54 - SCSI Speed Improvements. Now loads and saves twice as fast as previous versions. - Export to standard MIDI Type 1. Now the software can import and export both Type 0 and Type 1 MIDI files. - ISO 9660 format support. Adds ISO 9660 format support for CD's. This allows you to read CD's in the standard format. Previously we required an "image" of the hard disk format. - Supports looped WAV files, both import and export. Also correctly handles tuning of WAV and AIFF files. Saving a WAV file will now export the loop info, if any. Importing a looped WAV file will now get the loop data, if any. The software only handles one loop per sample, so the first loop found in a WAV file is used. - Now reads 2500 programs. Previously the 2000 would ignore programs containing 2500 specific parameters. Now it translates them, stripping out any KDFX or other 2500 parameters. - Improved object save and delete times. - Improved sample delete times.   New features and enhancements added when upgrading from version 3.01 or 3.18 All of the above, plus: - Eight 32-layer "drum" channels are now available. (PRAM option required). - A new option has been added for the sustain pedal (Program editor - LAYER page). When you select "On2," the sustain pedal will not catch the release of a note that is still sounding when the sustain message is received; this can be very useful in a program that uses amplitude envelopes with a long release time. - MIDI type 1 files can now be imported. - Verify option double-checks the data integrity of all your backup, copy, and save operations. - Info soft button on the Utilities page in Disk mode displays information about your disk drive(s). - Copy function now allows selection of multiple files. - You can now format multiple floppies without having to return to the initial Format command. - The K2000's SCSI subsystem has been enhanced to accept a greater variety of devices. In addition, the K2000 now supports disk drives of up to 2 Gigabytes (2048 Meg). V3.54 will work with drives larger than 2G but only the first 2 G will be utilized. (Drives larger than 1 gig will work externally, but are likely to draw too much power to be used internally. Please check our Hard Drive Compatibility List for power consumption specs. - Previous to v3.54, for the Backup and Copy functions, the combined size of both drives had to be under 1 gig unless PRAM was installed. This limitation no longer exists. - Compatibility with the PC Exchange program has been improved.   New features and enhancements added when upgrading from version 1 or 2 All of the above, plus: Version 3 operating system software for the K2000 offers majo

Dictaphone DPM8000/00 complet avec housse et station accueil cable, carte sd logiciel notice en boite d'origine jamais servi Features3D Mic system for best audio quality and accurate speech-recognition resultsThe breakthrough 3D Mic technology uses the built-in microphones to always deliver best recording results: an omnidirectional microphone offering 360 degree sound pick-up, ideal for the recording of multiple sound sources such as meetings, and a unidirectional microphone optimized for voice recording and accurate speech-recognition results.Built-in motion sensor for automatic microphone selectionThe built-in motion sensor senses when the device is placed on the desk or held in the hand and selects the microphone accordingly to suit the recording situation. The motion sensor switches automatically into standby mode when the device is idle. Once the Pocket Memo is picked up again, it’s ready to record within seconds.Ergonomic slide switch for efficient single-handed operationThe quick-response and ergonomic slide switch is designed for singlehanded operation of all recording and playback functions, allowing easy and quick file editing (insert, overwrite, append). It operates with a light sensor signal, making it wear-free and durable.Robust stainless steel casing for extra durabilityThe asymmetrical and ergonomic shape fits perfectly into your hand. Its slim and lightweight design maximizes comfort, even when working over longer periods of time. The brushed stainless steel creates a robust and highly durable protective shell around the device. The device is shockproof according to US military standard 516.6.SpeechExec workflow software for efficient data managementThe SpeechExec Pro software organizes the workflow of dictation files and resulting documents between author and transcriptionist, and allows you to monitor the status of your work.Large color display and clear user interface for easy, intuitive operationThe large full-color display offers sharp images, making it easier to see everything at first glance. The clear user interface is optimized for easy, intuitive operation.Docking station for fast battery charging and hands-free recordingThe stable and superior docking station provides speedy charging and automatic transfer of your recording to your computer. With an optional foot control connected, the docking station enables hands-free recording and transcription even without a computer.Light and motion sensors for extended battery lifeThe high-capacity Li-ion battery can be easily charged through a standard micro USB jack. The integrated light and motion sensors guarantee extended battery life. The smart technology adjusts the brightness of the display and switches automatically into stand-by mode when the device is idle, ensuring that your recorder will always be ready to work when you are.File encryption and device PIN lock for high data securityRecordings can be encrypted in real time using the Advanced Encryption Standard (AES or Rijndael Algorithm) with a key length of 256 bits. AES provides a very high degree of security and has been approved in the USA for the most highly classified government information. The device itself can be assigned a PIN code to protect against unauthorized use or file playback.Integrated barcode scanner for streamlined documentationThe integrated barcode scanner enables you to link client or patient data to a recording by simply scanning over a barcode, even from a display.* This ensures reliable assignment of client or patient IDs and speeds up your workflow.Remote management support for time-saving deployment and maintenanceThe Philips SpeechExec Remote Device Manager software allows IT administrators to centrally manage, configure and update dictation hardware from Philips, saving valuable time and resources. Managing device settings for individuals, groups and teams or the whole organization is easily done remotely.Classic mode for clear and easy-to-use operationMany users still love their analog devices for their simplicity and userfriendliness. The optional classic mode gives the user the look and feel of working with an analog device while retaining the advantages of digital technology and keep focused on the essentials. ConnectivityHeadphones:3.5 mmMicrophone:3.5 mmUSB:micro USB 2.0Docking connectorMemory card slotDisplayType:color TFTDiagonal screen size:2.4 inches / 6.1 cmResolution:320 × 240 pixelsStorage mediaExchangeable memory cardMemory card types:SD/SDHC (DPM8000, DPM8200), micro SD/SDHC (DPM8500), up to 32 GBMass storage class compliantData transfer speed:6.75 MB/s read speed, 5.0 MB/s write speedAudio recordingRecording format:DSS/DSS Pro (Digital Speech Standard), MP3, PCMBuilt-in microphones:1 directional microphone, 1 microphone for 360 degree recordingRecording modes:DSS QP (.ds2/mono), DSS SP (.dss/mono), MP3 (.mp3/stereo), PCM Voice (.wav/mono), PCM Stereo (.wav/stereo)Bit rate:13.7 kbit/s (DSS SP), 28 kbit/s (DSS QP), 192 kbit/s (MP3), 353 kbit/s (PCM Voice), 705 kbit/s (PCM Stereo)Edit modes:insert (DSS/DSS Pro), overwrite (DSS/DSS Pro, MP3, PCM), append (DSS/DSS Pro, MP3, PCM)Recording time (4 GB memory card):700 hours (SP), 350 hours (QP), 50 hours (MP3), 27 hours (PCM Voice), 13 hours (PCM Stereo)Sample rate:44.1 kHz (MP3), 22.05 kHz (PCM), 16 kHz (DSS QP), 12 kHz (DSS SP)SoundSpeaker type:built-in round, dynamic speakerSpeaker diameter:28 mmAcoustic frequency response:300 – 7500 HzSpeaker output power:> 200 mWPowerBattery type:Philips rechargeable Li-ion battery ACC8100Battery capacity:1000mAhBattery lifetime:up to 30 hours of recording (DSS Pro mode)Standby time:more than 200 daysCharging time (full charge):3 hoursSecurityReal time file encryptionEncryption standard:Advanced Encryption Standard (AES or Rijndael Algorithm) with 256 bitsDevice lock with pin codeUser identification via PIN codeNumber of supported user IDs:40DurabilityMIL-STD-810G 516.6 certified for shock resistanceBarcode scanner (DPM8500)Compatible bar codes:UPC–A, UPC–E, EAN–8, EAN–13, Code 128, GS1–128, ISBT 128, Code 39, Interleaved 2 of 5, Inverse 1D, GS1 DataBar, Matrix 2 of 5Scan engine:CCD-based, single lineSystem requirements for Philips SpeechExec softwareProcessor:Intel dual core or equivalent AMD processor, 1 GHz or faster processorRAM:2 GB (32 bit)/4 GB (64 bit)Hard-disk space:100 MB for SpeechExec software, 4.5 GB for Microsoft.NET FrameworkOperating system:Windows 10 Pro/Enterprise (64 bit), Windows 8.1/7 Pro/Enterprise (32/64 bit), Windows Server 2012 (64 bit), Windows Server 2008 R2 (32/64 bit), macOS 10.13/10.12 (Mac functionality may be limited)Graphics:DirectX-compliant graphics card with hardware acceleration recommendedSound:Windows-compatible sound deviceBrowser:Internet Explorer 9 or higher, or the current version of Chrome or FirefoxFree USB portInternet connection for required software activationAdditional system requirements for speech recognition softwareSupported speech recognition software:Nuance Dragon Professional 13/14/15 Individual/Group, Nuance Dragon Legal 13/14/15, Dragon Medical Practice Edition 3, Nuance Dragon SDK Client Edition 14Processor:Intel dual core or equivalent AMD processor, 2.2 GHz or faster processorRAM:4 GB (32 bit)/8 GB (64 bit)Hard-disk space:8 GBOperating system:Windows 10 Pro/Enterprise (64 bit), Windows 8.1/7 Pro/Enterprise (32/64 bit), Windows Server 2012 (64 bit), Windows Server 2008 R2 (32/64 bit), macOS 10.13/10.12 (Mac functionality may be limited)Green specificationsCompliant to 2011/65/EU (RoHS)Lead-free soldered productOperation conditionsTemperature:-5° – 45° C/23° – 113° FHumidity:10 % – 90 %, noncondensingDimensionsProduct dimensions (W × D × H):53 × 123 × 15 mm / 2.1 × 4.8 × 0.6 inchesWeight:117 g/4.1 oz including battery and memory cardPackage contentsPocketMemo Voice RecorderDocking StationMemory cardRechargeable batteryUSB cablePouchSpeechExec Pro Dictation Software (DPM8000, DPM8200)User manualAvailable accessoriesPhilips rechargeable Li-ion battery ACC8100Philips SDHC Memory Card ACC9008Philips Telephone Pickup Microphone LFH9162Philips Meeting Microphone LFH9172Philips Foot Pedal LFH2210Philips WLAN Adapter ACC8160Philips SpeechExec Remote Device Management Software LFH7470Philips SDK for Dictation Hardware LFH7475

The TASCAM CD-RW901SL Professional CD Recorder has the connectivity and professional features needed by studio and installation professionals: AES / EBU inputs / outputs RS-232 control port automatic increment, at fixed intervals identification markers recorded on the CD The CD-RW901SL takes all the features of the TASCAM CD-RW900SL, adding analog XLR I / O, wired remote control, and other features demanded by professionals. The XLR (balanced) and RCA (unbalanced) outputs have dedicated input and output level settings, allowing instant changes. The digital inputs are in AES / EBU and S / PDIF format, and feature an automatic sample rate converter, ensuring compatibility with any signal. The CD-RW901SL even plays MP3 files, with their associated information (ID 3 tags). The Time Track Increment feature automatically increments the track number (Track ID) after a certain number of minutes (between 1 and 10), which is ideal for concert or conference recordings. The Key Original function changes the playback speed without changing the pitch. The PS / 2 keyboard input makes it easy to enter track titles (CD Text function), plus access to frequently used menus and transport functions with just one press of a button. Using Tascam CD recorders is easy - they're a smart choice for installers and demanding customers alike. Main features: Records on “pro” or “music” CD-R or CD-RW media (general public) NEW! Select reading speed, to improve readability of poor quality or damaged media 24-bit A / D and D / A converters Balanced analog inputs / outputs on XLR Unbalanced analog inputs / outputs on RCA S / PDIF digital inputs / outputs, coaxial and optical types Input automatic sampling frequency converter (in 44.1 kHz), deactivatable Independent left / right input level adjustment Digital volume control Synchronized recording function Function of automatic incrementation of the track number (ID Track) according to the level Time Track Increment function - increments the track number every 1-10 minutes Entering index marks NEW! Skip mode selection: skip by track, by index or by 1 minute periods Digital fade in / out adjustable from 1 to 30 s, in steps of 1 s (fade in / out) Rec Mute function (digital silence recording) Erase / unfinalize CD-RWs Continuous, single, random or programmed track play (up to 99 tracks) Play all tracks, a single track or part of a track (A-B) Auto Cue, Auto Ready, Call and Incremental Play functions Playing MP3 Files Burned to CD Play MP3 files in their directories Viewing information about MP3 files (ID3 tags) Reading speed adjustment (± 16%, in steps of 0.1 to 1%) Key potentiometer (± 6 semitones) Original Key function (change the tempo without changing the key) CD Text compatible PS / 2 keyboard port, for CD Text data entry and transport control RS-232C serial control port (9-pin Sub D connector) Parallel port Power-on Play Mode: Automatically plays CD when power is turned on, convenient for installation applications NEW! Relay recording with two CD-RW901SL Supplied with wired remote control Rackable 2 U

keyboard: 61-key (dynamic) TONE GENERATOR Maximum polyphony128 voices (varies according to the load of the tone generator) Parties - 16 parts Sounds - SuperNATURAL Acoustic - SuperNATURAL Synth - SuperNATURAL Drum Kit - PCM Synthesis - PCM battery kit  Expansion - 2 memories (Slots) Effects - Multi-effects: 16 systems, 68 types ("Vocoder" can only be used for part 1.) - Game Equalization: 16 systems - COMP+EQ for battery section: 6 systems - Chorus: 3 types - Reverb: 6 types - Master Compressor (or "Insert FX" effect - 78 types.) - Master EQ - Total effect (TFX): 29 types - Reverb for microphone input: 8 types SEQUENCER MIDI Tracks: 16 Original file format, SMF file export/import, WAV file export SAMPLER Format - 16-bit, linear (44.1kHz), WAV/AIFF/MP3 file import possible Maximum polyphony:8 Number of samples - 16 pads x 4 banks (for each song) - * Samples cannot be used as waveform data for the tone generator.DIVERSRhythm MISCELLANEOUS Rhythm Pattern:Yes Arpeggio:Yes Chord Memory:Yes Controllers - D-BEAM Controller - Pitch Bend/Modulation Lever - Assignable switches x2 (S1/S2) - Pilot controls x6 - Sample pads - Tempo Command Screen - 5" color graphic LCD External memory - SD Card (SDHC recognized) Plug - Headphone jack: 6.35mm stereo jack - MAIN OUTPUT sockets (L/MONO, R): 6.35mm TRS jack - Sub Output Jack: 6.35mm Stereo Jack - AUDIO INPUT sockets - LINE: Stereo mini jack - GUITAR/MIC: Jack 6,35mm - FOOT PEDAL sockets (CTRL 1, CTRL 2, HOLD) - MIDI jacks (IN, OUT) - USB FOR UPDATE socket - USB COMPUTER jack (USB High Speed Audio/MIDI) - (Use a USB cable and a computer with a USB 2.0 Hi-Speed compatible USB 2.0 plug). - DC IN jack AC adapter  consumption: 1,300 mA