K rated

canon eos 5d mk II 21MP Fotocamera MK2  CANON EOS 5D MARK II 21MP DIGITAL SLR CAMERA - Only 70748 Shots - EOS5D MKii MK2. Condition is "Used".  Selling my 5D Mark 2 body, non in very good cosmetic situation, but the camera has been with me since long time an never put me down. I have sobstitute the shutter 3 years ago and clean the sensor from a canon store 2 weeks ago.  not used much in the last period. Considering these cameras are rated for 150,000 shutter actuations and a search online sees they perform well beyond that (up to 1 million!). Everything work perfectly. Comes as body only, with a battery, body cap, 1 extreme sandisk 16gb, strap and charger. Everything included is shown in the pictures. Only selling as switching to a mirror less system.

Préamplificateur haut de gamme APT HOLMAN made in USA- RARE -BONNE ÉTAT. État : "Occasion" Service de livraison : Colissimo Recommandé préamplificateur haut de gamme APT HOLMAN. Apt Holman Preamplifier (1977-1983) Nombreuses entrées, double entrée vynile ajustables. Sortie external processor etc..la liste complète des caractéristiques techniques est en Anglais. bonne état de Fonctionnement Inputs Phono 2 Phono inputs. The first has selectable resistance and capacitance, while the second is fixed at 47kΩ and 50 pF. 100 mV maximum at 1 kHz, inverse RIAA, warp-proof. The right channel of each of the two phono inputs is internally adjustable ±2 dB for Line All line inputs are 50 kΩ in parallel with 330 pF. Unselected inputs are terminated with 2.2 kΩ. Maximum input level: 10 V RMS (+20 dBV or +22 dBm). 3 line-level inputs. 2 tape monitor loops. 1 external processor loop, for a total of six line-level and two phono inputs! Gain, Polarity and Volume Control 18 dB maximum gain from line inputs. Phono preamp gain: 36.5 dB at 1 kHz: 5 mV for 2 V output, 1.25 mV for 0.5 V output. All outputs are non-inverting. Volume control rated to track left-right to within 1 dB over the entire range. I'm impressed: this is a very important parameter, and this is the only preamp I've ever seen which bothers to specify it. The multiwiper 10 kΩ volume control has 32 clicks, or 31 intervals, at 10o per click, or room for 36 clicks in 360.o The volume control uses individually trimmed thick-film resistors to ensure precise channel-to-channel tracking. Outputs Two MAIN outputs, fed in parallel. Provisions on the circuit board to allow your technician to insert a fixed resistive pad in the path of the MAIN 2 output if this optimizes the gain structure for your power amplifier. 330 Ω source impedance, 5 kΩ/3,000 pF maximum load. Two tape outputs: 100 Ω source impedance, 10 kΩ/1,000 pF maximum load. One external processor output. One 1⁄4" headphone output from a separate amplifier. Frequency Response 20 - 20,000 Hz ±0.5 dB, with ultrasonic and ultrasonic filters active. RIAA EQ ±0.5 dB 30 - 15,000 Hz. Selectable 15 Hz Infrasonic filter (rear panel switch) Within 0.5 dB at 20 Hz, -3 dB at 15 Hz and > -30 dB at 5 Hz. Group delay 4 mS at 50 Hz. If the filter isn't selected, the -3 dB point is 8 Hz. Ultrasonic Filter (automatically engaged when Tone Controls active) Within 0.5 dB at 20 kHz, -3 dB at 40 kHz, and -18 dB at 100 kHz. Group delay 7 μS. Interchannel delay: < 0.5 μS. (the limit of audibility is 10 μS.) When the tone controls are defeated, the -3 dB point is 150 kHz. High Filter (only active with Tone Controls selected) -3 dB at 8 kHz. Distortion Less than 0.01% THD at rated output (2V) and lower. Less than 0.01 % SMPTE intermodulation distortion (60/7k Hz 4s1) at rated output (2V) and lower.

AMPLI  ALESIS RA 150  DE STUDIO (home studio écoute en monitoring ou HIFI)   - en bon état de marche   - avec cordon secteur et notice d'utilisation en anglais    - état: Occasion   - j'ai remplacé: le relais de temporisation HP à l'allumage (une panne classique sur ce type d'ampli, provoque des coupures de son aléatoire)                                  les deux embases jacks des entrées symétriques   - Pour une livraison par mondial Relay, vérifiez si il y a un point relais dans votre région, avant de payer   - indiquez-moi le point relais que vous préférez   - Pour un paiement par chèque l'envoi du colis,après encaissement du chèque    CARACTÉRISTIQUE du CONSTRUCTEUR Size 18.9" W x 3.9" H x 10.25" D         (480mm x 99 mm x 260 mm) Rack units 2RU height Weight 15lbs = 6.8Kg Rated output, per channel 4 ohms @ 1kHz,.02% THD+N 75 watts RMS per channel 8 ohms @ 1kHz,.05% THD+N 45 watts RMS per channel 8 ohms, bridged mono mode 150 watts RMS Signal to Noise Ratio >105dB, 22Hz-22kHz bandwidth referenced to rated output Frequency Response 10Hz – 70kHz +0, -3dB Damping Factor 200 Slew Rate 60 V/μs (two channel), 120 V/μs (bridged mono) Input Sensitivity +4dBu (1.23 V) for rated output with input control at maximum Maximum input level +26 dBu Input impedance 20k Ω, balanced, 10 kΩ unbalanced Crosstalk -85dB, 1kHz Output offset +/- 50 mV, Servo controlled

AMPLI  ALESIS RA 500  DE STUDIO (home studio écoute en monitoring ou HIFI)   - en bon état de marche   - avec cordon secteur et notice d'utilisation en anglais    - état: Occasion   - j'ai remplacé: les bornes HP  avec des  fixations renforcées                               les boutons de volume en plastique                              le relais de temporisation HP à l'allumage (une panne classique sur ce type d'ampli, provoque des coupures de son aléatoire)                              les deux chimiques de filtrage 10000 µF 80V   - Pour une livraison par mondial Relay, vérifiez si il y a un point relais dans votre région, avant de payer   - indiquez-moi le point relais que vous préférez   - Pour un paiement par chèque l'envoi du colis,après encaissement du chèque            CARACTÉRISTIQUE du CONSTRUCTEUR Size 18.9" W x 5.63" H x 10.71" D          (480mm x 143 mm x 272 mm) Rack units 3 RU height Weight 28.5lbs = 13.0Kg Rated output, per channel 4 ohms @ 1kHz,.02% THD+N 250 watts RMS per channel 8 ohms @ 1kHz,.05% THD+N 150 watts RMS per channel 8 ohms, bridged mono mode 500 watts RMS Signal to Noise Ratio 105dB, 22Hz-22kHz bandwidth referenced to rated output Frequency Response 10Hz – 70kHz +0, -3dB Damping Factor 200 Slew Rate 60 V/μs (two channel), 120 V/μs (bridged mono) Input Sensitivity +4dBu (1.23 V) for rated output with input control at maximum Maximum input level +26 dBu Input impedance 20k Ω, balanced, 10 kΩ unbalanced Crosstalk -85dB, 1kHz All measurements done over a 20Hz-22,000Hz range with 1KHz sine wave at Full Scale, except for the dynamic range which was done with a -60dBFS 1KHz sine wave.

MARANTZ PM4000 - Amplificateur. État : "Occasion" - Télécommande non disponible.Fiche technique: Power outputRMS 8 Ohms/4 Ohms (40 Hz – 20 kHz) 30 / 40 WDIN 8 Ohms / 4 Ohms. 35 / 45 WIHF dynamic power8 Ohms / 4 Ohms. 50 / 80 WTHD at 8 Ohms RMS rated output 0.005%Intermodulation distortion. 0.005%Damping factor. 80Magnetic cartridge inputInput sensitivity impedance 2.5 mV / 47 k ohmsAccuracy of frequency response to RIAA. 0.5 dBSignal to noise ratio. 80 dBTuner / CD / Aux / Tape inputsInput sensitivity impedance. 150 mV / 20 k ohmsSignal to noise ratio. 105 dBFrequency response (–1 dB). 10 – 50 kHzTone characteristic (100 Hz and 10 kHz). –6 dBChannel separation 70 dBGeneralPower RequirementsN, UK version 230 V AC, 50 HzDimensions (MAX)Width 440 mmHeight. 116 mmDepth 293 mmWeight 6.0 k

Item was a gift, installed to test and check it was in perfect working order. The sound is better with it, but this is way too much for my humble set up, and space available, sadly. it will be sent in the special double box original packaging it came in so no worries. Parasound HALO A-52 + A52+ 5 VOIES 180 watts RMS x 5 8 Ω.     180 watts RMS x 5 @ 8 Ω     255 watts RMS x 5 @ 4 Ω     225 watts RMS x 2 @ 8 Ω     350 watts RMS x 2 @ 4 Ω     Class A/AB circuitry designed by legendary John Curl     Direct coupled - no capacitors or inductors in audio path ensures the cleanest signal     Balanced XLR inputs with discrete circuits     Full power is rated all the way down to 5Hz for unrestricted low-end bass     Custom 1.5 kVA encapsulated toroid power transformer with independent secondary windings for each channel     Hand-matched JFETs for input stage     Hand-matched MOSFETs for driver stage     Beta-matched 15 amp, 60 MHz bipolar output transistors (3 pairs per channel)     100,000 µF power supply filter capacitance     DC Servo and relay protection circuits     Auto turn on by audio signal or 12V trigger     Heavy-duty 24k gold-plated, 5-way speaker terminals     3U chassis with updated cosmetics, rack mountable with HRA3 (sold separately) Veuillez n'enchérir que si vous acceptez qu'il s'agit d'une vente privée, sans les garanties habituelles de l'UE et le droit de retour ! En soumettant une offre, vous acceptez cette condition. Power outpout 5 Channels Driven 180 watts x 5, 8 Ω 255 watts x 5, 4 Ω Power Output - 2 Channels Driven 225 watts x 2, 8 Ω 350 watts x 2, 4 Ω Power measurements parameters with 120VAC 0.05% THD, RMS continuous power, full audio band (20 Hz - 20 kHz) Current Capacity: 45 amperes peak, per channel Dynamic Headroom: >1.5dB Slew Rate > 130 volts per microsecond Frequency Response 5 Hz - 100 kHz, +0/-3 dB 20 Hz - 20 kHz, +0/-0.3 dB Total Harmonic Distortion (THD) IM Distortion TIM Unmeasurable Interchannel Crosstalk > 78 dB at 1 kHz > 63 dB at 20 kHz Input Impedance Unbalanced: 47 kΩ Balanced: 94 kΩ, 47 kΩ per leg Input Sensitivity for 28.28 V Output into 8 Ω Unbalanced: 1 V Balanced: 1 V per leg Total Gain: 29 dB S/N Ratio > 112 dB, input shorted, IHF A-weighted > 102 dB, input shorted, unweighted Damping Factor > 1100 at 20 Hz DC Trigger Requirements +9 Vdc to +12 Vdc, 5 mA Audio Trigger Requirements 2 mV - 10 mV XLR Pin Identification 1 = Ground (Shield) 2 = Positive 3 = Negative (Return) Dimensions Width: 17-1/4" (437 mm) Height without feet: 5-1/4" (133 mm) Height with feet: 5-7/8" (149 mm) Depth: 20" (508 mm) Depth with cables: 21-1/4" (540 mm) Net Weight 55 lb. (25 kg) Shipping Weight 69 lb. (31.3 kg) Power Requirement Standby: 1 Watt Idle: 125 Watts Maximum: 1500 Watts

VENDS AMPLI TUNER MARANTZ 2250 B + SON TRANSFORMATEUR 110 V/220 VOLTS AMPLI MARANTZ 2250 B AVEC TOUTES SES FONCTIONS EN PARFAIT ÉTAT DE MARCHE. TOUS LES ÉCLAIRAGES FONCTIONNENT. CET AMPLI MARANTZ EST UN AMPLI AMÉRICAIN QUI EST EN 110 VOLTS, CELUI CI MARCHE TRÈS BIEN AVEC UN TRANSFORMATEUR 220 VOLTS QUI EST COMPRIS DANS VOTRE ACHAT (TRANSFO DE QUALITÉ VOIR PHOTOS). CET AMPLI D'OCCASION COMPORTE QUELQUES TRACES D'USURES D'USAGES. ENVOI DE L'AMPLI PAR LA POSTE EN COLISSIMO RECOMMANDÉ. (COMPRIS DANS LE PRIX D'ACHAT) ENVOI SOIGNÉ AVEC PAPIER BULLES, POLYSTYRENE ET CARTON RENFORCÉ L'AMPLI AVEC SON EMBALLAGE PÈSE  25 KG. BON ACHAT A TOUS VOIR DESCRIPTIF COMPLET DU CONSTRUCTEUR CI DESSOUS: Général: Designed in USA Manufactured In Japan First Year 1976 Last Year 1977 Blue Face Yes Channels Two Speaker Connections two sets Amplifier: RMS Power Per Channel 50 Impedance 8 ohms Total Harmonic Distortion (THD).25 % Power Bandwidth 20 Hz to 20 KHz Frequency Response 20 Hz to 20 KHz +/- 0.5 % Intermodulation Distortion (IM).25% at rated power Input Impedance 30 k ohm Input Sensitivity for Full Output 1.5v FM Tuner AM Tuner: Gyro Tuning yes RF Sensitivity 1.9 uV 300 Ohm Binding Posts Spring connectors 75 Ohm Binding Posts Spring connectors Signal Strength Meter Yes Center Tuning Meter Yes Stereo Lamp Yes Dolby Lamp Yes Illuminated Dial Pointer Yes Amplifier: Multiple Bass Adjustments Yes Multiple Midrange Adjustments Yes Multiple Treble Adjustments Yes Tone Control Defeat Yes Bass Turnover Options Yes Treble Turnover Options Yes High Filter Yes Low Filter Yes Gain Control Yes Loudness Contour Yes Mono Yes Balance Slider Number of Tape Monitors Two Tape to Tape Dubbing Via front panel Auxillary Input Source Yes Phono Input Source Yes Illuminated Source Indicators Yes Cartridge Load 47 k ohm Tuner Source Input am, fm Source Tape Input (as opposed to a tape monitor) yes 2nd Source Tape input (as opposed to a tape monitor) yes Tape Monitor yes 2nd Tape monitor yes Preamp to Amplifier Jumper(s) yes Headphone Jack(s) Yes Speaker Selection Nomenclature main, remote

Works perfectly, looks like new. Specs: - Rated power output: 140 W/ch, 8 Ω - (from 20 Hz to 20 kHz, two channels driven): 170 W/ch, 6 Ω - Maximum effective output power: 210 W/ch, 6 Ω - Output bandwidth (8 Ω load, 0.09 %): 5 Hz – 40 kHz - Frequency response (1 W, 8 Ω): 8 Hz – 100 kHz (±3 dB) - Damping factor: 100 - Input sensitivity/impedance: 1.2 V / 22 kΩ (UNBALANCED), 2.4 V / 30 kΩ (BALANCED) - Signal-to-noise ratio (IHF-A): 105 dB - Voltage amplification level: 29 dB - Supply voltage: AC 230 V, 50 Hz - Power consumption: 330 W - Standby power: 0.2 W - Maximum external dimensions: 440 (W) x 126 (H) x 352 (D) mm - Weight: 10.8 kg En savoir plus Collaboration commerciale.

Philips MSD Platinum 20R 470W 85-110V 4 types de lampes disponibles, selon l'état d'usure. Les lampes notées comme 4 types of lamps avalaible, depending on lifetime. Lamps noted as Caractéristiques techniques: General Information Cap-Base -  [-] Operating Position UNIVERSAL  [Any or Universal (U)] Main Application Stage/Touring Life to 50% Failures (Nom) 1500 h System Description Reflector E21.9 TCM Light Technical Color Code 2 Luminous Flux (Nom) 22400 lm Chromaticity Coordinate X (Max) 314 Chromaticity Coordinate X (Min) 280 Chromaticity Coordinate X (Nom) 296 Chromaticity Coordinate Y (Max) 316 Chromaticity Coordinate Y (Min) 290 Chromaticity Coordinate Y (Nom) 298 Correlated Color Temperature (Nom) 8000 K Luminous Efficacy (rated) (Nom) 47 lm/W Operating and Electrical Power (Nom) 470 W Voltage (Max) 110 V Voltage (Min) 85 V Controls and Dimming Dimmable Yes Mechanical and Housing Cap-Base Information - Luminaire Design Requirements Bulb Temperature (Max) 900 °C Pinch Temperature (Max) 350 °C Product Data Full product code 871869668420700 Order product name MSD Platinum 20 RB 1CT/8 EAN/UPC - Product 8718696684207 Order code 928495205314 Pour une expédition hors France, merci de me contacter avant achat pour vous communiquer le bon montant des frais de port. If the item have to be shipped outside France, please send me a message before buying to tell you the good shipping price.