Led backlight strip

490mm LED Backlight Strip Kit Update 22 Inch CCFL LCD Screen To LED Monitor ZH This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 06-févr.-20 à 21:47:10 Paris, le vendeur a ajouté les informations suivantes:

540mm LED Backlight Strip Kit For 24" inch Update CCFL LCD Screen To MonitWFFR Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 22-août-19 à 10:39:35 Paris, le vendeur a ajouté les informations suivantes:

Welcome to xglk_43 This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. PAYMENT SHIPPING Terms of Sale ABOUT US Le 15-nov.-18 à 19:16:31 Paris, le vendeur a ajouté les informations suivantes:

Welcome to xglk_43 This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. PAYMENT SHIPPING Terms of Sale ABOUT US Le 01-déc.-18 à 15:12:05 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 15-mai-19 à 07:47:26 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 04-déc.-19 à 13:40:15 Paris, le vendeur a ajouté les informations suivantes:

Product introduction: New original lamp beads, pure color temperature; A new scheme, LED cross-flow booster, supports 10-30V ultra-wide voltage input; Three pieces in one group, can be tailored freely! 15-24 inch universal omnipotence type; Adjustable brightness This lamp has 3 beads and 1 group. It can be cut freely according to actual requirements. For example, we usually use about 420 mm for 19 wide screen. Then we only need to cut it to the right length according to the rule of 3 beads and 1 group. It's very convenient. Cross-flow plate specification: 7cm*2cm (long*wide) constant current plate, also known as booster plate Specification of lamp bar: 490mm*4mm*2mm (length*width*height) (84 beads/strip) Input Voltage: 10V~30V Wide Voltage Characteristic: This product is a special lamp bar for original display. It has high brightness and can't be directly viewed. LED particles compact, high-density arrangement imported high-brightness LED patches Long life, designed for display, with a life of 100,000 hours Easy to install, double-sided glue can be used to paste in the original LCD slot of the display, or to paste elsewhere. Energy saving and power saving, power is only 8W. The power of the original four LCDs is generally 24 W. Modified LED Backlight Advantage: (1) The brightness of backlight lamp made of ordinary lamp tube is very dim when it is turned on. The brightness of backlight lamp made of LED does not need to wait until it is fully preheated. When it is turned on, the brightness of backlight lamp made of LED does not need to wait at all. (2) The backlight made of ordinary lamp tube consumes no energy, and the LED backlight lamp is both energy-saving and environment-friendly. (3) And life is more than three times as long as the backlight lamp made by ordinary lamp tube. There is no need to change the backlight for a lifetime. One investment will benefit all one's life. Packaging includes: 1Set (LED lamp bar * 2 + constant current plate + connecting wire)   Le 08-août-19 à 16:48:14 Paris, le vendeur a ajouté les informations suivantes:

Product introduction: New original lamp beads, pure color temperature; A new scheme, LED cross-flow booster, supports 10-30V ultra-wide voltage input; Three pieces in one group, can be tailored freely! 15-24 inch universal omnipotence type; Adjustable brightness This lamp has 3 beads and 1 group. It can be cut freely according to actual requirements. For example, we usually use about 420 mm for 19 wide screen. Then we only need to cut it to the right length according to the rule of 3 beads and 1 group. It's very convenient. Cross-flow plate specification: 7cm*2cm (long*wide) constant current plate, also known as booster plate Specification of lamp bar: 490mm*4mm*2mm (length*width*height) (84 beads/strip) Input Voltage: 10V~30V Wide Voltage Characteristic: This product is a special lamp bar for original display. It has high brightness and can't be directly viewed. LED particles compact, high-density arrangement imported high-brightness LED patches Long life, designed for display, with a life of 100,000 hours Easy to install, double-sided glue can be used to paste in the original LCD slot of the display, or to paste elsewhere. Energy saving and power saving, power is only 8W. The power of the original four LCDs is generally 24 W. Modified LED Backlight Advantage: (1) The brightness of backlight lamp made of ordinary lamp tube is very dim when it is turned on. The brightness of backlight lamp made of LED does not need to wait until it is fully preheated. When it is turned on, the brightness of backlight lamp made of LED does not need to wait at all. (2) The backlight made of ordinary lamp tube consumes no energy, and the LED backlight lamp is both energy-saving and environment-friendly. (3) And life is more than three times as long as the backlight lamp made by ordinary lamp tube. There is no need to change the backlight for a lifetime. One investment will benefit all one's life. Packaging includes: 1Set (LED lamp bar * 2 + constant current plate + connecting wire)   Le 24-août-19 à 07:41:09 Paris, le vendeur a ajouté les informations suivantes:

Product introduction: New original lamp beads, pure color temperature; A new scheme, LED cross-flow booster, supports 10-30V ultra-wide voltage input; Three pieces in one group, can be tailored freely! 15-24 inch universal omnipotence type; Adjustable brightness This lamp has 3 beads and 1 group. It can be cut freely according to actual requirements. For example, we usually use about 420 mm for 19 wide screen. Then we only need to cut it to the right length according to the rule of 3 beads and 1 group. It's very convenient. Cross-flow plate specification: 7cm*2cm (long*wide) constant current plate, also known as booster plate Specification of lamp bar: 490mm*4mm*2mm (length*width*height) (84 beads/strip) Input Voltage: 10V~30V Wide Voltage Characteristic: This product is a special lamp bar for original display. It has high brightness and can't be directly viewed. LED particles compact, high-density arrangement imported high-brightness LED patches Long life, designed for display, with a life of 100,000 hours Easy to install, double-sided glue can be used to paste in the original LCD slot of the display, or to paste elsewhere. Energy saving and power saving, power is only 8W. The power of the original four LCDs is generally 24 W. Modified LED Backlight Advantage: (1) The brightness of backlight lamp made of ordinary lamp tube is very dim when it is turned on. The brightness of backlight lamp made of LED does not need to wait until it is fully preheated. When it is turned on, the brightness of backlight lamp made of LED does not need to wait at all. (2) The backlight made of ordinary lamp tube consumes no energy, and the LED backlight lamp is both energy-saving and environment-friendly. (3) And life is more than three times as long as the backlight lamp made by ordinary lamp tube. There is no need to change the backlight for a lifetime. One investment will benefit all one's life. Packaging includes: 1Set (LED lamp bar * 2 + constant current plate + connecting wire) Le 19-janv.-20 à 06:09:19 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 02-nov.-18 à 18:56:23 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 19-déc.-18 à 12:41:21 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 31-déc.-18 à 10:53:05 Paris, le vendeur a ajouté les informations suivantes:

  This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.     Le 28-mars-19 à 11:16:27 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 02-avr.-19 à 11:54:13 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 01-avr.-19 à 12:42:23 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 13-mai-19 à 09:37:06 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 05-mai-19 à 12:34:14 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 07-juin-19 à 15:31:18 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 08-juil.-19 à 16:49:15 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 07-juil.-19 à 12:08:03 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.       Le 05-juil.-19 à 15:24:06 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 19-juil.-19 à 10:32:43 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 17-juil.-19 à 10:58:26 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 09-août-19 à 05:06:14 Paris, le vendeur a ajouté les informations suivantes:

  This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.     Le 01-août-19 à 09:18:52 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 17-août-19 à 12:29:15 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 30-août-19 à 00:59:54 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 17-janv.-20 à 05:37:10 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 02-avr.-19 à 09:52:29 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 05-sept.-19 à 22:14:30 Paris, le vendeur a ajouté les informations suivantes: