Lemo to

LEMO connector | Push-Pull Type FGJ IB 303CLLD62 for sonosax SX-6, Mixer input connectors  We offer our special cable service, Mogami cable molded inside the connector to ensure a safe broadcast turning. Cable ready to solder: Red +, white - Gnd, on a Hirose connector plug or XLR 5... Answers to frequently asked questions: this cable connects directly to the LEMO 3 on your back chassis of your SX-6 mixer, just plug in... When the pigtail is "the R + W- mass / ground"  ready to be soldered directly to join an external  battery Type NP1 power supply with 12 V regulators. Now you can go field recording everywhere or broadcasting everywhere...

Adapts a Lemo 3-pin lavalier connector, Sennheiser wireless, Zaxcom, and Wisycom TX) to 3.5mm (1/8") for use with the Sennheiser G3 and AVX TX. Lemo-Jack Adaptor is a unique solution for connecting microphones with miniature LEMO 3 pin connectors (for Sennheiser SK50, SK250, Wisycom, etc. systems) to standard 1/8" jack inputs, or any other device equipped with a mini jack input. Enjoy connecting your mics to Sennheiser EW G3 (G1/G2 also supported), Audio Ltd. En2, etc. wireless systems.

Mini Lemo 5 to Lemo 6 right angle cable for Starlite HD 5'' ARRI only Transvideo. Service de livraison: Colissimo

Redrock Micro Remote Wireless Basic Kit  English Description I sell this HF focusing system because I haven't used it for 3 years. This is a product that I bought 5 years ago, it served about 40 days of shooting. It is in perfect working order! Aesthetically it is in fair condition, it has some scratches and signs of wear. It is sold with all its accessories (See Photo). Motor, Handheld remote control, Basestation, Power cable D-tape to lemo, Power mains cable 220v to lemo, cable lemo to lemo and transport box. The 2 focus stop screws were lost, I replaced them with standard screws. As well as the 2 screws of the rear battery cover which were replaced. The product is sold new for $ 2,720 on the RedrockMicro website https://shop.redrockmicro.com/product/microremote-wireless-kit/#product-info Here is the mode of use http://store.redrockmicro.com/start/assembly_docs/microRemote/microRemote_System_Doc.pdf ------------------------------------------------------------------------------------------------------------------------------------------------------------------ french description Je vends ce système de mise au point HF car je ne m'en sersplus depuis 3 ans. C'est un produit que j'ai acheté il y a 5 ans, il a servienviron 40 jours de tournage. Il est en parfait état de fonctionnement ! Esthétiquement, il est dans un état correct, il a quelquesrayures et traces d'usure. Il est vendu avec tous ses accessoires (Voir Photo). Moteur, télécommande Handheld, Basestation, Power câble D-tape to lemo, Power câblesecteur 220v to lemo, câble lemo to lemo et boite de transport. Les 2 vis des butées de mise au point ont été perdues, je les ai remplacées pardes vis standards. De même que les 2 vis du capot arrière de batterie qui ontété remplacées. Le produit est vendu neuf 2.720$ sur le site de RedrockMicro https://shop.redrockmicro.com/product/microremote-wireless-kit/#product-info Voici le mode d’emplois  http://store.redrockmicro.com/start/assembly_docs/microRemote/microRemote_System_Doc.pdf

Ich verkaufe für 500 € einen gebrauchten Marshall CV-PT-Remote-HEAD (Pan/Tilt) für Marshall Mini-Kameras. Mit den beigefügten Original-Platten lassen sich auch größere Kameras (z.B. GoPro) darauf nutzen. Der Remote-Head wurde für ein Projekt benutzt und hat keine Abnutzungsspuren und funktioniert einwandfrei. Hier ein Produkt-Video von Marshall: https://www.youtube.com/watch?v=RlNfl4LdokU Dazu biete ich auch den passenden gebrauchten Controller CV-MICRO-JYSTK für 250 € an, den die britische Firma BR Remote für Marshall für die Nutzung mit dem CV-PT-Remote-HEAD gebaut hat. Beide Artikel können auch einzeln gekauft werden. Versicherter Versand (jeweils der Warenwert) aus Frankreich mit der französischen Post. Versandkosten: 1) beide Artikel zusammen innerhalb von Frankreich: 17,39€ 2) beide Artikel zusammen in Europa: 25,60€ 3) nur Remote Head innerhalb von Frankreich: 14,39€ 4) nur Remote Head in Europa: 19,25€ 5) nur Controller innerhalb von Frankreich: 12,39€ 6) nur Controller in Europa: 17,25 € Zusätzliche Produktinformationen: Marshall Electronics has joined forces with high-endpan/tilt head designer BR Remote, to design and build a micro P/Thead, the CV-PT-HEAD, for Marshall miniature cameras. The new P/Thead is compatible with all Marshall 500 series cameras including theCV503, CV503-WP, CV506, CV506-H12, CV565 and CV566. The CV-PT-HEAD camera system can fit in the palm ofyour hand, and when used with the CV-MICRO-JYSTK passes power andcontrol to the camera using the Lemo to Hirose cable included in box. The CV-PT-HEAD body is less than 3.5-inches tall andless than 2-inches wide creating one of the smallest P/T footprintsavailable. The CV-PT-HEAD comes with an IP65 weatherproof rating,which means it is dust-tight and protected against water underpressure from any angle. When paired with Marshall’s weatherproofCV503-WP camera, the CV-PT-HEAD creates an excellent movable cameraposition that can be left out in wet and dirty environments. There isa built-in camera power supply delivering a constant 12V to thecamera socket as well as camera control data. The input voltage isfrom 12V to 35V allowing operators to run up to 3,000 feet with acommon 4-pin XLR cable. Unique for a small head, the input socket forpower and control data is on the fixed base. This allows for betterfreedom of movement, with the camera socket on the moving part withthe camera. For seamless plug-and-play, operators can useMarshall’s ultra-affordable CV-MICRO-JYSTK controller (soldseparately) with thumb joystick control. Possibly the smallest, mostcost-efficient joystick ever produced, the CV-MICRO-JYSTK providesgreat flexibility in an ultra-small package. En savoir plus Collaboration commerciale.

JAG35 WIRELESS ELECTRONIC FOLLOW FOCUS v2. État : "Pour pièces détachées/ne fonctionne pas" Je vends mon kit JAG35 WIRELESS ELECTRONIC FOLLOW FOCUS  v2. Il s’agit du KIT 2 incluant: -WEEF controller (compatible with two motors) -WEFF receiver (avec CANON LP-E6 battery plate) -batterie non inclue- -2 Pro Motors -2 LEMO Motor cable -2 Ring lens  +adaptateurs et rechanges (engrenages, roues, plates…) ATTENTION: le kit est complet mais ne marche plus… La liaison HF ne se fait plus, je ne sais pas pourquoi… En vente pour pièces donc, ou pour bricoleur averti... N’hésitez pas si vous avez des questions. Présentation et Infos = Control: Dimensions: H: 7.5" | W: 3" | L: 4" Weight: 1lb 7oz Receiver: Dimensions: H: 3.5" | W: 2.5" | L: 4" Weight: 7.2oz Based on the success of the Wireless Follow Focus v1 combined with the feedback from our dedicated customers; we knew a new version must be constructed. A unit that had all of the same characteristics of the first version plus added improvements. Some of those enhancements included is reduce the noise level and the ability to withstand production-use while still being affordable. We are happy to announce that the highly anticipated WEFF v2 has finally arrived! The professional grade case reduces the motors noise level and can withstand long durations of production usage.This custom unibody design has the battery integrated in the receiver and a built-in regulator that can support anywhere between 6v-30v preventing damage to the unit. Withstanding a wide range of voltage makes it possible to use different existing battery systems, it is even compatible with a D-tap battery system. Another feature is that it operates on two distinct channels. The main channel was designated for focus and the other channel for either Zoom or Iris; although the channels can be set up however desired. This handheld unit has adjustable end stops that set a range of rotation that can direct the motor in reverse if necessary. The motor was modified to be stronger and faster than before. The connectors used to power the WEFF V2 are the high-end industrial Lemo connectors. The WEFF V2 has a combination of both new and improved features that enhances the performance of a shooter. Both the unit and the motor are precise and configurative. An important feature we always strive to maintain in our products is affordability. PRODUIT ORIGINAL JAG35

X CABLE – TLP07CF-6 Key Features - Line level input adaptor cable with DC power in - In-line regulator 9v to 16v input - XLR female and 4-pin Hirose to 6-pin Lemo - For Micron 700 and Explorer 100 transmitters - 0.7 metres long Description Line input (0 dBm) and external powering with in-line voltage regulator, 0.7 metres long, XLR female and 4-pin Hirose æYÆ cable to 6-pin Lemo connector. DC input voltage to Hirose 9v to 16V. Marked TLP07CF-6 En savoir plus

Cosmetic scratches because used Works absolutely perfectly  Hase been revised Magazines seals remade to new Ready to roll !!! Please ask for films i actually shot with the camera  Package is: 1 ARRI SR3 CAMERA BODY (75fps max) 3 400FT MAG 1 VIEWFINDER EXTENSION 1 HD VIDEO TAP (HD SDI) 1 AVC TWINCHARGER WR900-25 2 BRAND NEW ONBOARD AVC BATTERIES 1 3 WAY POWER SPLITTER (3x Lemo 2) 1 XLR3 to Power 1 XLR3 EXTENSION 1 ARRI BP6 1 ARRI LWS2

RED Komodo 6k Cinema camera kit lightly used - 225 hours the camera condition is vey good, sensor clean and body scratch free the only slight b'"'defectb'"' is one hot pixel on the top display Shown in the last picture Inside the red circle let me very clear there is no stuck pixel on the sensor!!! it is one hot pixel on the top display only! The auction is for the following kit: Red Komodo 6k - 225 hours of use Red power supply Red Komodo trigger handle (as new used 10 hours) Canon 0,7 RF to EF Speedbooster adapter 8Sinn baseplate and Speedbooster support (fully screwd down solution, noting wiggles!) Tilta V-Lock + Lemo Adapter AF Pro C-Fast card 512GB (officially supported) AF Pro C-Fast card 1TB (officially supported) Yeti C-Fast Reader USB-3 and USB-C 5x Canon BP-955 Battery (the housing of one battery is cracked and glued, fully working) 1x Jupio Proline (Red Supported) BP-955 Battery 1x Canon BP-975 Battery 2x Canon CA-930 Battery charger If you want a different kit, or b'"'brain onlyb'"' please send me a message to discuss a custom kit Happy to assist you in English, German or French En savoir plus Collaboration commerciale.

VDB mic output cable for receivers 2000/2020/2040 - ref: OL-2000 Lemo 6 to XLR3 balanced. Length: 80cm Price is including 20% VAT.

Adapter DPA 6004 for HF Audio-limited TX2000, TX2020, TX2040 DPA DAD6004 is a Lemo 6 / MicroDot B&K connector to adapt DPA miniature microphones, compatible with Audio Limited transmitters: Tx 2000 / Tx 2020 / Tx 2040. The price indicated is per unit if you need more, let me know. I have some available.