Made with an itch

An outstanding Audiophile portable DAC 2 bits / 192 kHz, compatible up to 300 ohms Headphones. This DAC is a very High-definition Audio source, with an anti-jitter numerical interface. Apart from the outstanding performance and internal components, a unique aesthetic combination of wood and minimalist front design: The Front is in Aluminum, with a « retro » slider volume knob; The Rear is made with precious hand-carved sandalwood. · Provided with an excellent quality real leather, well-designed protection case. Technical Characteristics Op-Amps: ADI AD823 DAC: Cirrus Logic CS4398 Over sampling up to 24 bits/192 kHz: Cirrus Logic CS8422 High precision Quartz clock TCXO Memory Capacity Internal Memory: 32 Go Slot for extension by micro-SD Card (max. 32 Go, FAT 32) Display OLED Screen 2,4b'"' (6,1 cm), resolution: 320 x 240 pixels 5 level of luminosity Measures Signal / noise ratio: 112 dB Stereo channel separation: b'>' 75 dB (32 ohms) Very Low Jitter: b' Formats DSD 2,8 et 5,6 MHz WAV, FLAC (up to 192 kHz / 24 bits) OGG Vorbis, APE (44,1 kHz et 48 kHz / 16 bits) MP3 (up to 320 kbps) Management of native formats: 16 bits / 44 kHz, 24 bits/88,2 kHz, 24 bits/96 kHz,24 bits/176,4 kHz and 24 bits/192 kHz Connections 2 OUTPUTS mini-jack 3,5 mm (headphones and line) 1 EXTENSION port: MicroSD (for memory cards up to 32 Go) 1 USB Slot (micro-USB connection) used for battery charging, data transfer with PC and USB-DAC out. Power Internal Battery: 3,7 V 3400 mA Autonomy of more than 6 hours on battery Dimensions (LxHxP): 67 x 105 x 19 mm Weight: 167 grams See other info and reviews: • https://en.colorfly.net/en/downloadc10.html • https://headfonics.com/colorfly-c10-review/ NB: As the user notice has been lost, I will provide an Ad-hoc illustrated document explaining all the functionalities, which are rather simple, intuitive and user friendly. En savoir plus

ANGENIEUX   f 12 - 120 mm  1: 2.2 !                         Monture ARRIFLEX "S"                                  n° 1367641                     (traduction en français ci-dessous)   3 different mounts are easily and quickly adaptable to this lens  this thanks to specific adapters:                                                   - "MFT" 4/3 for BLACKMAGIC; LUMIX..                         - "C" for BOLEX / BEAULIEU cameras or other brands                                                                            - "NEX" for SONY Alpha So you can use this lens in film and digital !!                                                 These adapters allow you to keep all the focal length settings; focus distance and diaphragm! Only one adapter will be delivered with the set Please tell me when ordering which one you are interested in I would do the assembly in my workshop at no extra cost                                                 This "vintage" optic is in very good cosmetic & mechanical condition! Close to new! it has certainly been used very little! Take a look at the photos, they speak for themselves! The glasses are clear without scratches and mold (fungus) Internal review completed! (see information note below)    Information on internal lenses: The quality of "vintage" lenses deteriorates with age. (a bit like us...) Internal micro-dust is inherent in these objectives as well as some small cleaning scratches on the front glass. Faults which are generally not affecting the result photographic On the other hand, the presence of mold (fungus) on the glasses internal are detrimental! This is the real "cancer" of mineral glasses! After a while they become embedded in the glass and it is often very difficult to extract them! They gradually spread and completely degrade optical qualities! Molds are recognizable by this: - White filaments - "foggy" aspect - Deep opaque inlays These molds appear when lenses are stored in humid and polluted environments An external examination does not always make it possible to notice them! It is necessary to do an in-depth examination! An "endoscopic" examination! the only one that allows these defects (photo 11) To do so, use a "backlight" lamp The slightest defect becomes visible! you will be surprised at result! The next time you buy a lens ask the seller if such an examination was carried out! and its result It's a safe bet that this test was not carried out! This objective that I propose to you does not present these serious faults! The focus ring rotates very well the zoom control operates at regular and fluid way thanks to a disengageable crank, the diaphragm ring performs its function no problem Made of noble and robust materials (not plastic!..) Prestige optics from the famous French brand ANGENIEUX, market leader professional optics for over 75 years! It is a material of very high quality used in the cinematographic environment for decades Currently 85% of films shot in the world are shot with lenses ANGENIEUX! http://www.mediakwest.com/tournage/item/angenieux.html Exceptional optical qualities allow this optic to compete with best sets of fixed lenses at equivalent focal lengths.. Perfect homogeneity of colorimetry, contrast and resolution.. Intended for high-end film and digital cameras.. Constant diaphragm over the entire zoom stroke (no ramping), no pumping   Exceptional brightness See also the videos made with this lens on youtube, links below: https://www.youtube.com/watch?v=4EEmW-c4WBI https://www.youtube.com/watch?v=1jB_JpjCLGo&t=229s https://www.youtube.com/watch?v=hPz5dMAo_5w https://www.youtube.com/watch?v=FXxF27ogsgY

BOLEX H16 RX with KERN VARIO SWITAR EE 1:2.5 f 18/86 mm   Functional integrated automatic exposure meter and diaphragm !!                                       n ° 135905                           (traduction en français ci-dessous) Condition  of conservation and excellent cosmetic! The drive motor turns freely without problem. This set is fully functional and can be used for filming in 16 mm !! *** Please note that this camera has undergone a revision reflex sight system level! The lenses and prisms have been removed, checked and cleaned! Over time (often several decades) without maintenance the eyepieces and aiming prisms eventually become opaque. The aim becomes blurred and unspecified! (photo 12) Also check and clean the film presser. As well as the feed dog A film test (unimpressed) was performed to verify the correct unfolding of the film. And the absence of scratches! On the other hand, the motor drive system has been lubricated and tested! The brushed and shiny metal parts! These maintenance operations are rarely or even never offered by the sellers of BOLEX cameras! Ask them! You will be surprised ! Their cameras are sold as they are, directly taken from the attic with their dust and their dysfunctions..! No wonder these operations require experience technical and know-how! This camera is equipped with a handle and a lens: KERN VARIO SWITAR 1: 2.5 f 18/86 mm EE for BOLEX H16 RX                                       n ° 1056895 This fabulous lens specially designed for BOLEX H16 cameras is in a very good state of conservation The glasses are clear with no scratches or visible presence of mold The zoom control works perfectly A lever  allows it to be operated  This lens was designed specifically for H-16 and SLR cameras features a fully automatic iris control with a photo-resistance (exposure meter) to cadmium sulfide sensitive to values of films from 10-400 ASA. ******* Please note that most KERN lenses of this type offered for sale on this site have an integrated light meter which does not does not work ! (Cadminium sulfide, an essential element of the light meter, degrades with  time, especially in a humid atmosphere and eventually does not work anymore) ******* Whoever is integrated into this objective is in working order: the diaphragm opens and closes depending on the brightness! (photos 9) You can therefore use it automatically to film in 16 mm !! The diaphragm will react to the next closing or opening the lighting!.photo 9 No need to burden yourself with an auxiliary light meter! And correct manually the diaphragm permanently! The filmed scenes will be perfectly exposed! New mercury-free batteries are now available for supply the light meter. (photo 10) They are perfectly compatible! This is the type of battery: brand EPX625G 1.5 volt "Energizer" or others that you can get on or anywhere in the world! An original KERN metal sun visor is delivered with this zoom The "altuglass" presentation base is not part of the offer ******                                              **** Please read the general sales instructions before bidding or buying                (below) your submissions are worth acceptance.                            Thanks for your interest *** *********** Foreign Buyer (Outside the European Union) contact me before bidding. To determine the shipping costs (depending on the country) For buyers outside Europe the payment is made only by PayPal. The delivery address is exclusively the address "confirmed" by PayPal. **************  Failure to comply with these clauses cancels the order! Thank you for your understanding **********************

Great vintage guitar, amazing sound very SG. Hofner 174 from 1972, Serial number: 8847 made in Germany a comes with two "Blade" pickups with an amazing vintage sound (got to be careful with the gain settings on your amp!) standard 3 way switch, 2 tones, 2 volumes for every mic which gives you several great combinations. Neck and body are made of solid mahogany, set neck. It´s very lightweight (as an SG should be, i guess) but it sounds killer, plenty of mid-lows, mids and highs. Excellent player, it´s a very easy to play guitar, set up with low action and sounds amazing. Come with the original hardcase.

Pontiac Lynx II camera Modified LTM with FOCA 35mm lens. BODY: Pontiac LYNX II For 127 film Curtains are NEW It is modified for leica thread mount Lens. Any LTM lens can be screwed on the camera. No light leaks Film advance OK All speeds OK Clean body LENS: 35mm f 3.5 FOCA OPLAR Aperture OK, no oil on blades (old aperture scale) Smooth focusing Unfortunately a there is a bit of fungus It is a 36mm thread lens, not compatible with LTM this is why a created an adapted ADAPTER: 3D printed FOCA Thread Mount to Leica Thread Mount Some notes: This foca lens with the adapter can be use on Leica I line of camera. (Standard, C, F...) It cannot be used with with Leica M, Leica II of Leica III. This is due to the lens back barel wich is on the way of the ragefinder cam. I have tested some lens on the 3x4 format of this camera: As most of the LTM lens are designed to cover 24x36 negatives and not bigger 3x4 you may wonder what will work and what will not work. Here are my results with the lens I have been able to test: - Jupiter 8 50mm f2 (full coverage, no vignetting) - Jupiter 12 35mm f2.8 (Partial coverage, corner vignetting) - Voitglander color skopar 35mm f2.5 (full coverage, no vignetting) - Foca Oplar 35mm f2.5 (full coverage, no vignetting) the lens that comes with this camera - Industar 69 28mm f2.8 (Only center coverage, very heavy vignetting) Well despite the fact that it is not 100% original, it has some specification to make it shine. It is a LTM mount camera, so more flexible to use with other LTM lenses It comes with a FOCA 35mm lens, wich is not common It come with a FOCA adapter, is you have other foca threaded lenses, it is a chance to also use this range of lenses It is light and compact, no lens to extend. 127 film format is NOT extinct. There are film available out there. (Rollei crossbird, HP5, etc) I have cut a Rollei RPX 400 and made some shots. See the photos made with this camera and this film. En savoir plus Collaboration commerciale.

* * * * I send in all Europe and all over the world. *** Envié toda Europa y en todo el mundo. ***   Ho mandato in tutta Europa e nel mondo. ***  Enviei toda a Europa e em todo o mundo.   For the purchase of several items the discount is provided excluding postage: * 2 items = - 5% of the total * 3-5 items = - 10% of the total * 6 items and more = - 15% of the total Feel free to ask me questions in French or English *  *  *  *  *  * NORMES CE * Vends CB  Midland modèle  ALAN 28  complète avec sa boite et une copie de la notice d'utilisation en Français, de plus elle a été modifié pour être équipée  d'un un tiroir anti-vol de type "voiture" *** complete with its box and 1 copy of the user manual in French, moreover it has  been modified to be equipped with an anti-theft drawer of the "car" type ***  ******** elle a 4 W de puissance et 40 canaux (voir photo 4) elle est en bon état de fonctionnement, émission comme réception (seul les boutons "Up and Down" du micro sont inopérants, compte tenu des modification apportées  à cette CB et de la remarque ci-dessus, son prix d'achat qui n'est vraiment pas très élevé,  de plus elle est équipée d'un Haut-parleur extérieur en bon état de fonctionnement) *** The CB has 4 W of power and 40 channels (see photo 4),  it is in good operating condition, in transmission as reception    (only the "Up and Down" buttons on the microphone are ineffective, given the modifications made to this CB and  the above remark, its purchase price which is really not very high,  moreover it is equipped with '' an external speaker in good working order) *** ****** Elle est livrée avec un micro Midland 6 broches It comes with a 6-pin Midland microphone + 1 tiroir anti-vol de voiture ou camion + 1 anti-theft drawer for car or truck +  1 Haut-parleur avec étrier de fixation + 1 loudspeaker with mounting bracket + la boite d'origine Midland et 1 copie du manuel d'utilisation en français  ( + 1 original Midland box and 1 copy of the user manual in French) *  *  *  *  * CARACTERISTIQUES  TECHNIQUES : -  Bouton Off - Volume -  Bouton Squelch -  Bouton  Micro gain -  Bouton RF gain -  Bouton Sélecteur des canaux par rotacteur et touches Up / Down -  Commutateur CB / PA -  Commutateur Fil / Out -  Commutateur Filtre Anl -  Commutateur Mode AM / FM -  Commutateur Swr / S-Rf -  Commutateur CH Lock -  Commutateur Memo + touches M1 à M5 -  Commutateur CH Scan -  Affichage TX / RX (LED) -  Affichage digital du canal -  Vu-mètre à Led -  Prise micro 6 broches en façade -  Micro  -  Nombre de canaux: 40 cx (version Export: 120cx) -  Puissance: 4 watts -  Prise SO259 pour branchement de l'antenne -  Prise jack pour branchement haut parleur extérieur -  Prise jack pour branchement PA extérieur -  Cordon alimentation * * * * *  PAYEZ directement avec PAYPAL en utilisant votre compte ou avec une carte bancaire habituelle, site entièrement SECURISE)   NOTA: Les frais demandés sont forfaitaires et comprennent les frais postaux, les frais d'emballage et les divers frais se rapportant à la vente de cet objet. $  $  $  $  $ VOUS TROUVEREZ PEUT ETRE CET ARTICLE UN PEU MOINS CHER AILLEURS, MAIS REGARDEZ BIEN SI ON VOUS PROPOSE LES MEME GARANTIES SUR L'ARTICLE ET LE MEME SERIEUX DE L'EXPEDITION, SUR MON SITE VOUS POUVEZ ACHETEZ EN TOUTE CONFIANCE et si vous achetez 2 articles ou plus je vous offre les frais d'envois du 2ème article et des suivants? (offre valable en France métropolitaine uniquement) VOUS POUVEZ VOIR MES NOTATIONS FAITES PAR LES EURS, ELLES PROUVENT LE SERIEUX ET LA QUALITE DE MES VENTES.  N'hésitez pas à consulter mes autres objets en vente ! (Offer valid in France only by cons of shipping to EUROPE will be reduced if you buy multiple ite

Tilta MB-T03 Overview Fair condition, Many cosmetic wears, but Works perfectly.            Very lightweight mattebox, I recommend. - 1 - 2 - 3 - 4 - 5 The Tilta 4 x 4" Carbon Fiber Matte Box features carbon fiber and aluminum construction, making it both lightweight and durable. The matte box will work with lenses up to 100mm in diameter. It features one fixed and one rotating 4 x 4" filter stage and mounts onto lightweight 15mm rods. The matte box incorporates a swing-away design for rapid lens changes. The included removable top and side flags can be precisely set and locked to block stray light from flaring your lens. The included anti-reflection rings protect your image by blocking stray light behind the camera bouncing off filters in the matte box and flaring your image. Lightweight Construction The matte box is made of carbon fiber, with aluminum used for the support structure. This provides a lightweight yet sturdy unit that is appropriate for shooting hand-held or with a stabilizer rig, when every ounce counts. Swing-Away Design The swing-away design allows you to quickly move the matte box out of the way to check or change lenses, without having to remove the matte box from the support rods. This way you don't have to hand off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or having a filter tray fall out. Top & Side Flags The removable top and side flags provide you additional flare control and attach to the matte box with a lockable hinged assembly. This allows you to precisely set your flags to match the edge of frame for different lenses and lock them in place so that they don't move during the shot. Anti-Reflection Inserts The three included anti-reflection inserts work with lenses with an outer diameter of 72, 80, and 90mm. They provide a light-tight seal so that light from behind the camera cannot leak through where the lens joins the matte box and reflect off filters to flare your image. When you are using lenses with outer diameters other than 72, 80, and 90mm or with lenses that have excessive focus travel it is recommended to use the cloth "nun's knickers" to prevent light leaks. In the Box - Tilta 4 x 4" Carbon Fiber Matte Box - 2 x Filter Tray (4 x 4") - Nuns Knickers - 3 x Anti Reflection Insert

projection lens 35 KP 140mm F1.8 M42 mount with helicoid. État : Occasion Service de livraison : Colissimo Recommandé Version planar, 6 éléments, environ 1.6kgLes lentilles sont propres, la bague de mise au point est fluide Vendu avec le bouchon avant (95mm) et le bouchon arrière. Je peux ajouter une bague EOS/M42 sans puce si besoin à pleine ouverture c'est un peu soft mais c'est ça qui fait le charme de cette optique.J'ai "bricolé" un système qui simule un diaphragme à l'aide de diverses bagues d'adaptation ce qui permet d'avoir du F1.8, F2.8 et F4 (à F4 l'objectif est très piqué). Ce système n'est pas définitif, la première bague est simplement fixée à la patafix + du gaffer par dessus. ------------------------------------------------------------------------------------------------- Quite rare 35 KP 140mm F1.6 Planar version (6 elements) with custom high quality helicoid (made by an Ukrainian master) around 1.6kg ! Glass is clean, no fungus, maybe few dust particles and/or micro bubbles Focus is smooth I did a DIY kind of aperture system with step-down ring: with 1 ring it's equivalent to F2.8 and with all rings it's equivalent to F4, so it's very sharp ! That system can be removed without problem, the 88-86mm ring is just "glued" with patafix. I can add an EOS/M42 adapter (without chip) for free If you have any question, send a message

projection lens 35 KP 140mm F1.8 M42 mount with helicoid. État : Occasion Service de livraison : Colissimo Recommandé Version planar, 6 éléments, environ 1.6kgLes lentilles sont propres, la bague de mise au point est fluide Vendu avec le bouchon avant (95mm) et le bouchon arrière. Je peux ajouter une bague EOS/M42 sans puce si besoin à pleine ouverture c'est un peu soft mais c'est ça qui fait le charme de cette optique.J'ai "bricolé" un système qui simule un diaphragme à l'aide de diverses bagues d'adaptation ce qui permet d'avoir du F1.8, F2.8 et F4 (à F4 l'objectif est très piqué). Ce système n'est pas définitif, la première bague est simplement fixée à la patafix + du gaffer par dessus. ------------------------------------------------------------------------------------------------- Quite rare 35 KP 140mm F1.6 Planar version (6 elements) with custom high quality helicoid/focus ring (made by an Ukrainian master) around 1.6kg ! Glass is clean, no fungus, maybe few dust particles and/or micro bubbles Focus is smooth I did a DIY kind of aperture system with step-down ring: with 1 ring it's equivalent to F2.8 and with all rings it's equivalent to F4, so it's very sharp ! That system can be removed without problem, the 88-86mm ring is just "glued" with patafix. I can add an EOS/M42 adapter (without chip) for free If you have any question, send a message Shipping is quite expensive but the lens is heavy and it will need lot of protection

projection lens 35 KP 140mm F1.8 M42 mount with helicoid. État : Occasion Service de livraison : Colissimo Recommandé Version planar, 6 éléments, environ 1.6kg Les lentilles sont propres, la bague de mise au point est fluide Vendu avec le bouchon avant (95mm) et le bouchon arrière. Je peux ajouter une bague EOS/M42 sans puce si besoin à pleine ouverture c'est un peu soft (tout dépend la personne) mais c'est ça qui fait le charme de cette optique. J'ai "bricolé" un système qui simule un diaphragme à l'aide de diverses bagues d'adaptation ce qui permet d'avoir du F1.8, F2.8 et F4 (à F4 l'objectif est très piqué). Ce système n'est pas définitif, la première bague est simplement fixée à la patafix + du gaffer par dessus. ------------------------------------------------------------------------------------------------- Quite rare 35 KP 140mm F1.6 Planar version (6 elements) with custom high quality helicoid/focus ring (made by an Ukrainian master) around 1.6kg ! Glass is clean, no fungus, maybe few dust particles and/or micro bubbles Focus is smooth I did a DIY kind of aperture system with step-down ring: with 1 ring it's equivalent to F2.8 and with all rings it's equivalent to F4, so it's very sharp ! That system can be removed without problem, the 88-86mm ring is just "glued" with blu tack and some gaffer on it. I can add an EOS/M42 adapter (without chip) for free If you have any question, send a message Shipping is quite expensive because the lens is heavy and it will need lot of protection

Great integrated amplifier, comes with the optional wireless card (worth of 300 euros!) and the optional remote, sold separately for 45 euros. It was a secondary system that was not been used much, in perfect working condition and looks. Great DAC on the wireless side of CD quality without compression (16 bits / 44 kHz) and also an excellent headphone output. I'm also throwing in the CD50 player that it worked absolutely perfectly until recently, when it no longer turns on. I took a look inside, but everything seems in order, no burnt parts, I don't know what could be the cause and I don't have time, someone else could fix it and use it, it sounds great and it cost about 650 euros! So consider it as a bonus to the associated amplifier! Made in France. No original box but will be extremely well packaged. Would consider posting it internationally but please, ask for a quote as the postage differs from country to country and the amount in the description is for European Union only, thanks. A pure sound reproduction that does not lack warmth. When listening, the device immediately stands out for the subtlety and delicacy of its sound reproduction. It is a follower of purity and its midrange register is particularly elegant. It manages to be very rich in colors and timbres, while demonstrating a very high transparency with an excellent presence effect. The Atoll IN50 is unpretentious, does not seek to impress, neither by its appearance nor by its performances, but delivers a restitution that is both very delicate and full of energy. Stereo integrated amplifier Symmetrical structure 1.5 mm steel chassis Mos-Fet transistors 160 VA toroidal transformer Electronic protection Measurements Power: 2x50 W under 8 ohms and 2x70 W under 4 ohms Pulse power: 90 W Input sensitivity: 100 mV Power supply: 160 VA Current capacity: 15,000 µF Input impedance: 220 kohms Frequency response: 5 Hz to 100 kHz Connections 6x RCA stereo analog inputs and 1x monitoring output 1x 3.5 mm mini-jack headphone output (front) 2x RCA stereo pre-out outputs Gold-plated screw terminals General Minimum consumption: 11 W Maximum consumption: 200 W Dimensions (lxhxp): 440 x 90 x 270 mm Weight: 7 kg DAC Burr Brown PCM1754 Lossless CD quality transmission (16 bits / 44 kHz) Arcam / teac / marantz / denon / yamaha / onkyo / atoll / nad / fidélité musicale / gustard / ifi / moniteur audio / klipsch / ifi / AudioQuest / Astell b'&' Kern / iBasso / Hidizs / Fiio / Shanling / beyerdynamic / meze / hifiman / audio technica / akg / bel canto / violectric / lehmann / parasound / benchmark / auralic / burson / aune / Arcam, Benchmark, Einstein, Pass, Mark Levinson, ifi, Eversolo, Fidelice, Mytek, Hegel, Nuprime, Auralic, Rupert Neve, Chord, Naim, PS Audio, Parasound, Sparkos, Atoll, Nad, Sugden, Exposure, Krell, Leak, Advance, Cayin, Luxman, Yamaha, Cambridge, Quad, Cyrus, quad / cambridge audio / Cayin / beyerdynamic / meze / hifiman / audio technica / akg / bel canto / violectric / lehmann / parasound / benchmark / auralic / burson / aune / feliks / vincent / little dot / prima luna / pathos / willsenton / reisong / woo / fezz / pier audio / jadis / sennheiser / schiit / topping / luxman / ZMF, sparkos, geshelli, paradis musical, fosi, KEF, Linn, gato, m2tech, Arcam / quad / cambridge audio / teac / marantz / denon / yamaha / onkyo / atoll / nad / musical fidelity / gustard / ifi / monitor audio / klipsch / ifi / AudioQuest / Astell b'&' Kern / iBasso / Hidizs / Fiio / Shanling / Cayin / beyerdynamic / meze / hifiman / audio technica / akg / bel canto / violectric / lehmann / parasound / benchmark / auralic / burson / aune / feliks / vincent / little dot / prima luna / pathos / willsenton / reisong / woo / fezz / pier audio / jadis / sennheiser / schiit / topping / ZMF, sparkos, geshelli / emotiva / krell / leak / sugden / hegel / exposure wiim, eversolo, sony, aune, gustard, smsl, volumio, matrix, KEF, Linn, gato, m2tech, sony, edifier, jbl, wharfedale, jamo, kanto, ruark, tria En savoir plus Collaboration commerciale.

Ancien appareil photo argentique lubitel 2 made in CCCP Russie avec son étui. appareil en  bon état avec encore une pellicule à l'intérieur  et manque la plaque lubitel 2 étui un peut décousu dans un angle. Les photographies ont valeur de description le tout vendu dans l’état comme sur les photos. --- N'hésitez pas à consulter mes autres ventes en cliquant sur mon pseudo --- Old lubitel 2 film camera made in CCCP Russia with its case. device in good condition with still a film inside and missing the lubitel 2 plate holster can be unstitched at an angle. The photographs have value of description all sold in the state as in the photos. --- Feel free to check out my other auctions by clicking on my nickname --- Mes Frais D'envoi incluent le colissimo simple avec suivi si toutefois, vous ne souhaitez pas passer par ce type d'envoi, l'envoi en colissimo recommandé peut s'effectuer moyennant des frais supplémentaire. l'envoi type relais Kiala/Mondial relay pourras s'effectuer pour des économies de vos frais de port mais à vos risques et périls donc aucune réclamation ne sera acceptée. Lors d'envoi en colissimo ou kiala/mondial relay, ouvrez votre colis en présence du préposé de la poste et n'acceptez pas un colis qui a l'air abimé. Aucun remboursement ne sera effectué sans ce constat. L'envoi se fait sous 48heures après réception du paiement. Mes emballages sont particulièrement soignés afin que vous receviez votre objet dans les meilleures conditions vérifier mes évaluations pour constater. Frais d'expédition réduits pour les achats groupés. Je reste a votre entière disposition pour toutes vos questions par mail, envoi d'autres photos, commande groupés ou toutes autre information. Le paiement devras être effectuer sous 15 jours sauf cas exeptionnel ou un litige sera ouvert avec. Pour les paiement depuis l'étranger uniquement par virement bancaire depuis les pays hors Union Européenne (Royaume Uni et suisse inclus) chèque possible depuis les pays de la zone Euro Pour les frais de livraison merci de me demander avant l'achat du produit pour les pays étrangers, pour vous indiquez le prix reel de livraison de votre pays. Mail: antiquitebrocantes@gmail.com -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- My Fees Submitted include Colissimo with tracking so easy, however, you do not want to go through this type of shipment, the sending colissimo can perform additional fee. sending such Kiala / Mondial relay is able to make savings on your postage but at your own risk, therefore, no claim will be accepted. When sending colissimo or kiala / global relay, open your parcel in the presence of an officer of the post and do not accept a package that looks damaged. No refunds will be made without this finding. The shipment is made in 48 hours after receipt of payment. My packages are particularly carefully so that you receive your item in the best check my feedback to see. Reduced shipping for bulk purchases. I remain at your disposal for all your questions by mail, send more pictures, or any other pooled control information. The payment will have to be carried out within 15 days except in the case exeptionnel or dispute will be opened with. For payment by bank transfer abroad from countries outside the European Union (including the UK and Switzerland) check possible from the countries of the Euro zone For shipping thank you for asking me before purchasing the product to foreign countries, you specify the actual price of delivery of your country. Mail: antiquitebrocantes@gmail.com

Item Description Enhance your guitar's aesthetics and functionality with these genuine Ibanez metal potentiometer knobs, crafted in Japan for precision control. Elevate Your Guitar with Ibanez Knobs Enhance your guitar experience with this pair of genuine Ibanez potentiometer metal knobs, sourced directly from Japan. These knobs are not only functional but also add an aesthetic touch to your instrument. Perfect for musicians who value quality and performance, these knobs ensure precision control while elevating the overall look of your guitar. With excellent condition, these authentic knobs promise to upgrade your instrument seamlessly and effectively. Key features of our Ibanez Metal Potentiometer Knobs - Authentic Ibanez knobs for precision control over sound settings. - Made in Japan for high-quality craftsmanship and reliability. - Enhance your guitar’s aesthetics and functionality with style. - Used but in excellent condition for optimal performance. - Perfect for upgrading your instrument’s performance and look. Transform your guitar with our Ibanez Knobs today! Experience the difference with these genuine Ibanez knobs. Elevate your playing with style! Item Condition: Pre-Owned Item Location: FR Warehouse – Marseille SKU: JS-IBZPKB-01 My Global Reach Stay connected through my official website and social media for the latest updates and exclusive offers. The account JakeSpecial is my main store where I specialize in selling PDAs, refurbished computers, and a curated selection of retro and vintage tech. As a renowned top-rated seller, I am dedicated to providing a top-notch shopping experience. Additionally, I invite you to explore JakeSpecial_Global, my new global account, where you'll find a unique collection of Hobbies b'&' Toys, MOC Brick Sets, EDC gear, and more. Real-Time Inventory Synchronization Inventory levels are synchronized in real-time between and my website, ensuring stock availability reflects the most accurate and up-to-date information. Fast b'&' Secure Shipping — Global Delivery Options I typically dispatch items within 2 business days for products shipped from my warehouse in Marseille, France, and within 5 business days for products shipped from Hangzhou. Every package comes with a tracking number, and delivery estimates range between 10 to 20 days, depending on your location. My storage facility in Hangzhou allows me to work closely with premier suppliers, ensuring access to the finest quality products at the most competitive prices Follow me Follow me on Instagram to discover my latest finds and promotions. Join the community at @jake.special.official and stay updated with all my new arrivals and vintage tech treasures. Join me on TikTok to explore my latest collections and special offers. Follow my account @jakespecial and never miss an update on my unique vintage tech and special finds. Guaranteed Transparency and Excellence I ensure that all items are presented as accurately as possible in photos and descriptions, with no surprises, hidden issues, or quality compromises. If you have any issues with your purchase, please contact me. Your satisfaction is my top priority. Jake Special — Passion b'&' Unique Expertise I take pride in offering meticulously crafted items, carefully curated by me, Jake, PhD in Mathematics. My extensive business and tech experience, combined with my background in teaching, research, and strategic tech initiatives, ensures the highest standards. Alongside me, Marwa, with her strategic vision and dedication, has been instrumental in building and growing this platform. Together, our expertise and passion for excellence define everything I do, ensuring that each purchase reflects my commitment to quality, precision, and a genuine love for what I do. Business Information I believe in complete transparency with my customers, and I’m committed to building trust in every interaction. That's why I’m providing all the key details about my business below, so you can feel confi En savoir plus Collaboration commerciale.

This is an Intrepid 8x10 camera in excellent working condition. The only small point worth noting is that I shortened one of the tabs on the ground glass holder in order to allow the back to be closed in landscape mode - see images. The rest of the camera is in near perfect condition with only some superficial marks on the wood. The glass is chip and scratch free. The bellows are light-tight and undamaged. The focus mechanism is smooth and works as normal. Everything hinges and locks down as it should. /// *** /// - In addition to the 8x10 camera I'm including for FREE a semi-home made reducing back for 5x7 format, which I made from a spare 8x10 back I had, so you can be sure that it fits the camera body correctly without light leaks. Despite the home made nature of this back, I have used it with this camera 95% of the time as I have a 5x7 enlarger. - As well as the 5x7 back, I'm also including for FREE, a 4x5 back that can be fun to play around with if you also want to shoot an even smaller format. - Finally, I'm also including a FREE dark cloth that is roughly 110x160cm, but which could potentially be opened to be even bigger if necessary. Delivery is FREE, and to the European Union only. I respond to any questions within a few hours. --- Je réponds également aux questions en français. --- En savoir plus Collaboration commerciale.

    iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:     Item Description Remarks Inputs/Outputs     Inputs (rear) USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in) Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible)   Intelligent SPDIF® Coaxial 3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM   SPDIF Optical         Outputs (rear) Audio RCA L+R     Intelligent SPDIF® Coaxial Up to 192kHz PCM       Output (right side) SmartPower® Socket Fast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A             Controls     Controls (front)     - HP Output Audio 6.3mm Headphone Jack   - Volume with Power On/Off switch Precision analogue volume control - 3.5mm Input   Auto disable the digital section when this is in use - X-Bass® On/Off   - 3D Holographic Sound® On/Off Auto-switching for Speakers® and Headphones® (two separate and distinct circuits)       Controls (left side)     - Power Mode Turbo, Normal, Eco Computer controlled power and gain scaling - Polarity Normal/Inverted   - Filter 3 positions, 6 filters (see filter section below)       Controls (bottom)     - Line Direct/Preamplifier Preamplifier function Enable/Disable, 0/9dB gain selectable Fixed 2V or variable with up to 5V available - iEMatch® Perfect-matching circuit for IEMs (eliminate hiss) Off / High Sensitivity Headphone / Ultra Sensitivity Headphone             DAC section     DAC Dual-core DSD, DXD, PCM DAC by Burr Brown 2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR   Bit-Perfect DSD processing, Bit-Perfect PCM processing         Clock Ultra low jitter GMT computer controlled Femto Clock RMS jitter 12kHz – 1MHz       Audio Formats DSD 512/256/128/64 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 All native decoding, no internal hardware conversion   DXD 2x/1x 768/705.6/384/352.8kHz All native decoding, no internal hardware conversion   PCM 768/705.6/384/352.8/192/176.4/96/88.2/ 48/44.1kHz All native decoding, no internal hardware conversion       Filters     - PCM Bit-Perfect Processing/Minimum Phase/Standard Digital filters selectable - DSD Extreme/Extended/Standard Range Analogue filters selectable - DXD Bit-Perfect Processing Fixed analogue filter             Specifications (DAC Section)     Dynamic Range (Line) >117db(A)   THD & N (0dBFS Line)   Output Voltage (Line) >2V   Output Impedance (Zout)   Jitter (correlated) Below AP2 test set limit               Headphone Power Output     HP Amp Output Power (max) Power (continuous.) - Turbo mode 10.0V/4,000 mW @ 16 Ohm >1560 mW @ 64 Ohm - Normal mode 5.5V/1,900 mW @ 16 Ohm >950 mW @ 32 Ohm - Eco mode 2.0V/500 mW @ 8 Ohm >250 mW @ 16 Ohm             Specifications (Headamp Section)     Dynamic Range (HP) >115dB(A) (Eco Mode, 2V Out)   THD &N (HP 500mW/16R)   Output Voltage (HP) >8V (Turbo Mode)   Output Impedance (Zout)   Maximum Output Power 4,000mW @ 16 Ohm Load when using sinewave testing the iDSD micro may engage protection circuits Continuous Output Power 1,000mW @ 64 Ohm Load