Manual es digital

Digital Camera Panasonic LUMIX DMC GF2 + zoom Vario G 14-42 mm Boxed In very good condition, minimal tracks of use. See actual pictures. Digital Camera and Lens, in original complete box, with: Zoom Vario G 14-42mm OIS stabilized f3.5-5.6 Lens & hood  (Focal zoom x3 = 28-84 mm equivalent) Original charger (EU & UK cords  ) & original battery Body & Lens caps , Neck strap, install and instructions CDs, paper manual guide, USB & video cables, Hama black neoprene shoulder bag and a new very hi-speed SDHC Sandisk 16Gb card. 4/3 Sensor CMOS 12,1 MPix Intuitive Touch-screen operations 1920 x 1080 Full HD Movie Recording in AVCHD Format iA automatic Modes + a pallet of creative options for both Photos and Movies RAW & JPEG formats ;  Built-in pop-up flash with red-eye reduction. Contrast detection autofocus  ; White balance; Integrated dust reduction technology Braketing;  High ISO 6400 sensitivity Interchangeable lenses

Digital HDTV signal amplifier booster for cable TV fox HD channel 2 ZH This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable Length: 80cm/31.50in (Approx.) 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Note:  1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!   Package includes:  (No retail package) 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 23-oct.-19 à 10:45:33 Paris, le vendeur a ajouté les informations suivantes:

Digital HDTV Signal Amplifier Booster For Cable TV Fox Antenna HD Channel 25d ZH Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 22-oct.-19 à 12:16:55 Paris, le vendeur a ajouté les informations suivantes:

PRODUCT DESCRIPTION Specifications Impedance: 75 Ω LNA- Gain: 30dB Connectors: F Male, Gift Universal Connector Reception Range: 960 miles High Performance Coax Cable: 1.5C-2V / Black L=13.2FT Voltage: 5V Power supply connector: USB Size: 220*130*0.6mm   Features: FREE HD Program for Life Our HDTV Antenna can get access to your local news, weather, sitcoms, kids and sports programs, including ABC, CBS, NBC, PBS, Fox_, Univision and more. Absolutely FREE forever. 60-80 MILES Long Range Reception Range: 200 miles Generally, the Antenna should be keep far from disturbance source, air conditioner/refrigerator/microwave oven, etc. Antenna amplifier is included to provide added range and maximum signal reception for more channels if you are far away from broadcast towers. Importance: If a signal can’t be received with the external amplifier, remove the antenna amplifier and try again. Before You Purchase Please first visit " antennaweb.org" to check how many broadcast towers surrounding you within 60-80 miles. Discover how many FREE CHANNELS are available from your local broadcasters. Check if your TV is digital or TV. HDTV antenna pulls in hundreds of crystal clear digital & HD shows! Receives free HD channels including ABC, CBS, NBC, PBS, Fox_, Univision and more. Strong Signal Reception Victor amplified indoor aerials with 60-80 miles and 1080P 4K/VHF/UHF/FM stronger- reception, detachable amplifier booster and 13FT high performance coax cable.Amplified aerial can be placed almost anywhere in your home Ultra-Thin Design The super soft, unobtrusively thin design and powerful reception capabilities make this antenna a top choice for any home.   Package Includes: 1 × Antenna 1 × Signal Amplifier 1 × F To LEC Converter 1 × Instruction Manual

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter   Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 11-mai-19 à 14:32:07 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter   Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 11-sept.-19 à 08:16:07 Paris, le vendeur a ajouté les informations suivantes:

Grabador digital de audio. 32 GBytes. Con manual de uso. Grabación de un sólo toque.

This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable Length: 80cm/31.50in (Approx.) 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Note:  1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!   Package includes:  (No retail package) 1 X TV Fox Signal Amplifier 1 X Plug Converter   Le 15-avr.-19 à 10:48:35 Paris, le vendeur a ajouté les informations suivantes:

This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable Length: 80cm/31.50in (Approx.) 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Note:  1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!   Package includes:  (No retail package) 1 X TV Fox Signal Amplifier 1 X Plug Converter   Le 20-avr.-19 à 16:11:22 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 23-avr.-19 à 10:06:22 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 17-mai-19 à 18:37:13 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 17-mai-19 à 15:00:49 Paris, le vendeur a ajouté les informations suivantes:

  Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter     Le 14-mai-19 à 15:22:17 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 13-mai-19 à 06:28:20 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 10-mai-19 à 20:51:18 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 10-mai-19 à 14:05:12 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 10-mai-19 à 11:40:40 Paris, le vendeur a ajouté les informations suivantes:

This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable Length: 80cm/31.50in (Approx.) 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Note:  1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!   Package includes:  (No retail package) 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 31-mai-19 à 07:41:28 Paris, le vendeur a ajouté les informations suivantes:

This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable Length: 80cm/31.50in (Approx.) 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Note:  1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!   Package includes:  (No retail package) 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 04-juil.-19 à 02:16:04 Paris, le vendeur a ajouté les informations suivantes:

This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable Length: 80cm/31.50in (Approx.) 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Note:  1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!   Package includes:  (No retail package) 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 03-juil.-19 à 22:10:52 Paris, le vendeur a ajouté les informations suivantes:

This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable Length: 80cm/31.50in (Approx.) 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Note:  1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!   Package includes:  (No retail package) 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 03-juil.-19 à 07:31:19 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 30-juil.-19 à 19:39:11 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 28-juil.-19 à 20:03:22 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 22-juil.-19 à 16:46:18 Paris, le vendeur a ajouté les informations suivantes:

  Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter     Le 22-juil.-19 à 08:47:15 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 15-août-19 à 17:31:23 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter   Le 18-sept.-19 à 12:05:00 Paris, le vendeur a ajouté les informations suivantes:

                                                                                        Description                     Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 02-nov.-19 à 11:37:18 Paris, le vendeur a ajouté les informations suivantes:

This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable Length: 80cm/31.50in (Approx.) 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Note:  1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!   Package includes:  (No retail package) 1 X TV Fox Signal Amplifier 1 X Plug Converter   Le 24-oct.-19 à 11:10:55 Paris, le vendeur a ajouté les informations suivantes:

This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable Length: 80cm/31.50in (Approx.) 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Note:  1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!   Package includes:  (No retail package) 1 X TV Fox Signal Amplifier 1 X Plug Converter   Le 22-oct.-19 à 11:26:49 Paris, le vendeur a ajouté les informations suivantes: