Modded

This is a 2nd gen iPod mini, with the following modifications: - 128GB storage flash memory, instead of 4GB hard drive - blue backlight instead of white default - Apple Taptic Engine instead of original click wheel sound There are some discreet marks of use, see photos. The battery life time is excellent. Discrete marks on the screen glass (almost invisible, I was unable to make them visible on the pictures). Works perfectly. USB cable is provided with it. Needs iTunes on Windows or Mac to add music on it. For Linux, softwares using libgpod are working: Rhythmbox, Amarok,... There is also the blue version, available here. En savoir plus Collaboration commerciale.

This is a 2nd gen iPod mini, with the following modifications: - 128GB storage flash memory, instead of 4GB hard drive - orange backlight instead of white default - Apple Taptic Engine instead of original click wheel sound There are some discreet marks of use, see photos. The battery life time is excellent. Discrete marks on the screen glass (almost invisible, I was unable to make them visible on the pictures). Works perfectly. USB cable is provided with it. Needs iTunes on Windows or Mac to add music on it. For Linux, softwares using libgpod are working: Rhythmbox, Amarok,... There is also the blue version, available here. En savoir plus Collaboration commerciale.

This is a 2nd gen iPod mini, with the following modifications: - 128GB storage flash memory, instead of 4GB hard drive - orange backlight instead of white default - Apple Taptic Engine instead of original click wheel sound There are some marks of use, see photos. The battery life time is excellent. A tiny mark on the screen glass (almost invisible, I was unable to make it visible on the pictures). Works perfectly. USB cable is provided with it. Needs iTunes on Windows or Mac to add music on it. For Linux, softwares using libgpod are working: Rhythmbox, Amarok,... There is also the blue version, available here. En savoir plus Collaboration commerciale.

This is a 2nd gen iPod mini, with the following modifications: - 128GB storage flash memory, instead of 4GB hard drive - orange backlight instead of white default - Apple Taptic Engine instead of original click wheel sound The battery life time is excellent. I tested it, after a full charge the iPod lasts 21 hours and 30 minutes reading music at mid-level volume continuously, connected to an in-ear Apple-like headset. There are some discreet marks of use, see photos. Discrete marks on the screen glass (almost invisible, I was unable to make them visible on the pictures). Works perfectly. USB cable is provided with it. Needs iTunes on Windows or Mac to add music on it. For Linux, softwares using libgpod are working: Rhythmbox, Amarok,... En savoir plus Collaboration commerciale.

This is a 2nd gen iPod mini, with the following modifications: - 128GB storage flash memory, instead of 4GB hard drive, - orange backlight instead of white default, - Apple Taptic Engine instead of original click wheel sound. The battery life time is excellent. I tested it, after a full charge the iPod lasts 21 hours and 30 minutes reading music at mid-level volume continuously, connected to an in-ear Apple-like headset. Supplied with: - box, - new USB cable, - new headset. There are some discreet marks of use, see photos. Discrete marks on the screen glass (almost invisible, I was unable to make them visible on the pictures). Works perfectly. Needs iTunes on Windows or Mac to add music on it. For Linux, softwares using libgpod are working: Rhythmbox, Amarok,... En savoir plus Collaboration commerciale.

Here i sell my modded Td-3 video of this machine: https://www.youtube.com/watch?v=VfGNhBbmJXw & hear the differences between the basic Td-3 & modded: - saw: https://www.youtube.com/watch?v=sw4j-Ul8KhI&list=UUChHparJgGzbd_32ocOexwA&index=14 - square: https://www.youtube.com/watch?v=pr0Wqtwi4d8 - distortion: https://www.youtube.com/watch?v=yZu0ocEzDvE don't miss this full 303 sound !! Then the Td-3 Mo won't have this liquid sound, no square adjust, no main envelop slew, no distortion,  think about it ! here are the mods: adjustable: - Hollow square adjust (adjustable trimpot) - Vca decay (adjustable trimpot) - Gate long: notes can be longer (On/Off switch) - Main Envelop slew or Zwitschergewitter (On/Off switch) - Portamento (On/Off switch) intern / non ajustable: - lower cutoff (20k resistance) + VR1 trimmer adjust / calibration 303 - VCA level/crunch mod (+ 2db) - Psu Mod (This effect is some livelier sound, especially on high resonance and accent = Resonance Warble) - soften VCA attack / declick balance Vca (no click on attack) - rubber mod - distortion (more bass & less harsh, volume is louder) - sound less "staccatto" (notes are a bit longer than the td3) voltage: 220 volts

Here i sell my modded Td-3 video of this machine: https://www.youtube.com/watch?v=nzXdP1fkc88 ---b'>' don't miss this full 303 sound !! Then the Td-3 Mo won't have this liquid sound, no square adjust, no distortion, think about it ! Believe it or not, this Td-3 has sonically more guts than the Td-3 Mo ! here are the mods: adjustable: - resonance boost (switch On / Off) - decay from short to long (switch On / Off + adjust pot.) - Filter FM (switch On / Off + adjust pot.) - Square wave adjust (adjust pot.) - Manual Accent Trigger (the red button) - Pitch notes (Slider 5 positions) normal +1 + 2 + 3 +4 notes above. Sometimes the voltage drifts because it pumps little voltage so note can be sharp (♯) intern / non ajustable: - cutoff at 0 to max - VCA level/crunch mod (+ 2db) - Psu Mod (This effect is some livelier sound, especially on high resonance and accent = Resonance Warble) - soften VCA attack / declick balance Vca (no click on attack) - rubber mod - distortion (more bass b'&' less harsh, volume is louder) - sound less b'"'staccattob'"' (notes are a bit longer than the td3) comes with psu 9V european. look carefully the pics. The slider of pitch notes is not perfectly drilled, anyway i wans't able to do better ! international shipping with tracking please when you buy, leave a message with name + adress + phone + mail for delivery company, it is easier for me when i register (instaed of checking the dashboard..) thanks ! En savoir plus Collaboration commerciale.

For sale iBasso DX90 DAP, with original box and accessories, in excellent condition (has always been used with protective screen and case), working perfectly. While pretty good in its original form, iBasso engineers did cut some corners and the player does not reach its full potential. As such, the player has been extensively modified in order to improve performance:  - power supply and DAC stages have been redesigned in order to reduce the overall distortions and noise level, in particular at lower frequency where the original suffers the most (around 5dB THD+N improvement at 1KHz, 30dB (!) improvement at 20Hz)  - output buffering stage has been modified in order to improve performance with lower impedance earphones (with 16ohm load THD+N is improved by approx. 30dB) Measurements with a professional audio analyzer show that the modified player is reaching excellent performance under real life test conditions (line out: -105dB THD+N across pretty much most of the audible frequency spectrum, headphone out: -102dB THD+N while delivering 500mVrms under a 16ohm load). Included:  - DAP  - Original battery (in very good condition) + new spare battery  - USB cable  - Coax SPDIF out cable  - Burn-in cable  - Silicone case  - Spare screen protector (one already applied) The item will be carefully packed and tracking number will be provided. Shipping out of France, fast delivery and no taxes for destinations within EU.

For sale Topping D50 DAC, in excellent condition (as new), with original box and accessories. The DAC has been modified to address the rather notorious intermodulation distortion issues most ESS 9038Q2M DAC implementations suffer from ("ESS IMD hump"). Measurements with a professional audio analyzer show that the issue has been completely fixed (before and after IMD vs. amplitude graph included). The item will be carefully packed and tracking number will be provided. Shipping out of France, fast delivery and no taxes for destinations within EU. Note to potential buyers from UK: 1. VAT may be levied on goods imported from EU, depending on their nature, value and country of origin. Buyer is responsible for paying such taxes if deemed applicable by UK authorities. 2. Delays at the border may occur. If you are interested in this item, please contact me first to check the shipping options.

For sale Topping D50 DAC, in excellent condition (as new), with original box and accessories. The DAC has been modified to address the rather notorious intermodulation distortion issues most ESS 9038Q2M DAC implementations suffer from ("ESS IMD hump"). Measurements with a professional audio analyzer show that the issue has been completely fixed (before and after IMD vs. amplitude graph included). The item will be carefully packed and tracking number will be provided. Shipping out of France, fast delivery and no taxes for destinations within EU.

Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303. As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds, without diluting the essential TB-303 character. MODS INCLUDE: VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob. Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods. VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob. VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff cont

Clone de la TB-303 modifié par Circuitbenders, en parfait état, hormis les stickers qui se décollent un peu. Fonctionne nickel. Moded by Circuitbenders clone of the famous TB-303. Fully working. Demo here: https://youtu.be/GSebDXf9rP4 Here are the specs: The MAM MB33 Retro is the latest version of the MB33 / FAT FREEBASS clone of the infamous Roland TB-303.  As standard it features all of the original TB-303 controls, and also has an external audio input through the filter and VCA. Overlapping midi notes gives you that essential 303 note slide, and any midi note with a velocity of 120 or more will trigger the note accent. Realistically if this synth was programmed correctly, you would be VERY hard pressed to distinguish between this unit and a real 303 in a mix. In a side by side comparison i'd say it sounds a little meatier than the Behringer TD3, with a little more girth and analogue weight to the sound. We have modded this machine with our circuitbenders Acid FM mods to give a huge range of extra sounds,  without diluting the essential TB-303 character.  MODS INCLUDE:  VCO On/Off Switch: Normally when you plug a jack into the external VCF input, the MB33's VCO is automatically removed from the mix. As there may be occasions where you don't want this to happen, or situations such as when you're using the filter lock mod (see below) when you want to be able to turn the VCO on and off yourself, we've added a switch to add manual control of this. VCO Drive: The MB33 retro seems to be designed to slightly distort the output stage at full volume, much like the TB303 did. The Drive mod boosts this distortion savagely for some grungy acid techno sounds. This mod increases the maximum amount of distortion at maximum volume. The intensity of the distortion can be set using the normal volume knob.  Resonance Boost Switch: An annoying issue with these machines is that the resonance never reaches self oscillation (but then neither did the TB303) and also drops off considerably when the cutoff is over 3/4 of the way up. We've solved this problem by adding the resonance boost switch. With this switch activated the filter starts to squeal with the resonance about halfway up, and then just screams with self oscillation at any higher settings. The resonance boost is especially effective when used with the VCF FM mods.  VCF FM: Essentially VCF FM (Frequency Modulation) allows you to modulate the filter cutoff at audio frequencies to create all kinds of clanging cross modulation and bizarre alien splatters & sweeps. This effect works best with the resonance cranked up into self oscillation which is where the resonance boost mod comes into play. The FM controls allow you to select one of four sources for the FM signal. The first is the normal filter input socket round the back. This means you can run a sound through the filter section, but also use that sound to modulate the filter cutoff at audio frequencies at the same time. The second source is a new FM input jack on the right hand side of the case. Using this source allows you to run a sound through the filter from the VCF input or just use the internal VCO, and at the same time modulate the filter cutoff with an entirely independent sound source at the FM in jack. The actual audio from the FM in jack is not heard. The remaining two sources are the sawtooth and square wave signal from the main oscillator. These can be selected as sources completely independently of the setting on the VCO waveform knob The FM source select knob also has an 'off' setting. The amount of FM applied to the VCF is controlled using the VCF FM knob.  VCF CV input: This mods adds 3.5mm jack on the right side of the machine that will accept an external CV to control the filter cutoff. The CV input should range from 0-5v. Higher voltages, or negative voltages are NOT recommended. This mod also adds a switch on the front to toggle between internal and external cutoff con

BOSS DS-1 "FULL ROCK" modification from Msm Workshop ! First, notice that it's an old 1991, Taiwan made DS-1 "ACA". What its mean is that you'll find the famous Toshiba TA7136AP like Japan one inside! Its was one of the first Taiwanese made, not knowed, those pedals was made with the Japanese parts. Demo:  https://cutt.ly/qgbNXD9 FULL ROCK SPECS: - Gain Switch: Overdrive / Distortion - Trimode Switch: Normal / Turbo / Clean booster - Low noise components - Fuller sound with less harsh highs. Nothing to compare with the original fizzy tone. - Transparent tone, and upgraded buffer! Better tone even OFF. - More Volume - White LED - Black knobs for the switches. - ACA modded to PSA (12V to 9V) No Box. Fully Checked at the workshop. Ready to rock 30 years again!  LET'S ROCK WITH THE FULL ROCK DS1 !

Le John Tucker (exemple audio) Modded Oppo UDP 205 est le meilleur lecteur numérique que j?ai jamais entendu parler. C'est la chose la plus proche que j'ai entendue d'une platine haut de gamme (15K et plus). Il a égalé ou surperformé les lecteurs numériques de la gamme 15K. La scène sonore vous enveloppe comme le ferait une plate-forme analogique. C'est tellement dommage qu'Oppo ait cessé de fabriquer ces unités. Voici votre chance d'en obtenir un avec très peu d'heures. L'unité a environ un an et est dans la boîte depuis près de six mois alors que ma salle d'écoute était reconstituée. Audio et hifi occasion à vendre à Propriano (20110)

Up for Sale JMI Tone Bender Professional MKII (w/ NOS Mullard™ OC-75 Transistors) and All-NOS Military-Spec Parts inside This particular one is #192 of only 250pc made worldwide and based on JMI claims that it was Built in collaboration with Tone Bender legendary builder himself: Mr. Gary Hurst this one has some serious Mojo, as it was modded as close as it gets to '60s Sola-Sound spec and tone. the mod job was executed professionally by a talented pedal builder Michael Rayo, right here in Jakarta, Indonesia. with all the best, carefully selected and tested Real NOS "Military-Spec" parts from '60s-'70s era. the pedal was in Perfect working order with no single issue or misuse, played with so much care and attention in a smoking free environment. the pedal is so very Clean physically (very minor sign of use) Complete with Original Box, Swag, Paper, and Certificate of Authenticity Sold as described No return, sorry! feel free to ask!