Move tv

Features: Universal connector, suitable for all countries. Innovative flat, razor-thin antenna design. It has high gain and low error rate digital tv signal reception,and a significant signal enhancement in actual use. Increase the reception of tv programs, and eliminate the pause the mosaic images. Multi-directional design pulls in signals from all directions. Fast and easy to set up -Unwrap,plug it in and Scan channels. You can put it on the wall, on the table or on the window (strongly recommended) and it will make you enjoy watching crystal clear digital &HD shows with many opportunities. Set up guide: Step1: Connect the end of attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box,Plug the USV plug into the USB port of the TV or Digital Converber Box. Step 2: Hand held the antenna, near the window, place it horizontally or vertically Step 3: In the TV’ s or STB ’ s setup menu, set the tuner mode to  “ Antenna ”  or  “ Air ” For more detailed instructions, please refer to your TV manual. Step 4: In the TV’ s  or  STB ’ s  setup menu, set TV to  “ scan ” for channels. This can sometimes be listed as auto-program,auto-scan,channel search or channel scan. Consult the TV manual or detailed instructions. Step 5: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal postition is found. Adjustment of antenna directions Connect the antenna to TV properly. Set TV to Antenna mode. When the signal quality is low, adjust the location of the antenna or rotate it towards television station. you an watch the clear tv program until the signal quality gets improved. Note: for the best reception, please check the following tips. This digital hdtv antenna is intended for indoor use only. Placing the antenna higher or close to/in a window may result in better reception. You must rescan whenever you move the antenna. Keep the antenna away from any sources of interference: keep the antenna away from those big power consumption devices, such as air conditioner elevator, hairdryer and microwave oven…etc. If you use a flat HDTV, please go through your tv manual to make sure your TV comes With built-in tuner for free view. Make sure you are using a HD receiver; otherwise no HD channels can be picked up. Please read receiver manual. you need to retune your free view TVs and digital receiver form time to time to ensure your are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. TV reception capacity depends on the distance among your hone, transmitting tower and Surrounding environments. For maintenance of the antenna, please use soft cloth with diluent mild detergent to clean its shell. Package List: 1 x Indoor Digital TV Antenna 1 x Universal Connector   Features: Universal connector, suitable for all countries. Innovative flat, razor-thin antenna design. It has high gain and low error rate digital tv signal reception,and a significant signal enhancement in actual use. Increase the reception of tv programs, and eliminate the pause the mosaic images. Multi-directional design pulls in signals from all directions. Fast and easy to set up -Unwrap,plug it in and Scan channels. You can put it on the wall, on the table or on the window (strongly recommended) and it will make you enjoy watching crystal clear digital &HD shows with many opportunities. Set up guide: Step1: Connect the end of attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box,Plug the USV plug into the USB port of the TV or Digital Converber Box. Step 2: Hand held the antenna, near the window, place it horizontally or vertically Step 3: In the TV’ s or STB ’ s setup menu, set the tuner mode to  “ Antenna ”  or  “ Air ” For more detailed instructions, please refer to your TV manual. Step 4: In the TV’ s  or  STB ’ s  setup menu, set TV to  “ scan ” for channels. This can sometimes be listed as auto-program,auto-scan,channel search or channel scan. Consult the TV manual or detailed instructions. Step 5: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal postition is found. Adjustment of antenna directions Connect the antenna to TV properly. Set TV to Antenna mode. When the signal quality is low, adjust the location of the antenna or rotate it towards television station. you an watch the clear tv program until the signal quality gets improved. Note: for the best reception, please check the following tips. This digital hdtv antenna is intended for indoor use only. Placing the antenna higher or close to/in a window may result in better reception. You must rescan whenever you move the antenna. Keep the antenna away from any sources of interference: keep the antenna away from those big power consumption devices, such as air conditioner elevator, hairdryer and microwave oven…etc. If you use a flat HDTV, please go through your tv manual to make sure your TV comes With built-in tuner for free view. Make sure you are using a HD receiver; otherwise no HD channels can be picked up. Please read receiver manual. you need to retune your free view TVs and digital receiver form time to time to ensure your are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. TV reception capacity depends on the distance among your hone, transmitting tower and Surrounding environments. For maintenance of the antenna, please use soft cloth with diluent mild detergent to clean its shell. Package List: 1 x Indoor Digital TV Antenna 1 x Universal Connector Le 21-avr.-19 à 14:02:09 Paris, le vendeur a ajouté les informations suivantes:

1000 Mile 4K HD TV Aerial Digital Indoor Antenna Signal Amplifié Freeview C9 DE Features: Free For Life: Never pay your cable or satellite for television again! The antenna will save your time, energy and money. The indoor HDTV digital antenna is specially designed for receiving digital over-the-air (OTA) TV broadcasts from local television stations and can pull in all of your local news, weather, sitcom, kids and sports programming with no monthly contract or bills. Just plug it in to your television and let the antenna do all the work. High performance - extremely lightweight paper thin design,you can hide it behind the TV, lay flat on table; stick it high on window (stand moisture weather or exposed to sunshine). It'll pull in hundreds of crystal clear digital & HD shows! It can be safely painted to match any home decorations without affecting reception or signal loss. Specification: Name: Indoor digital TV receiving antenna Colour: Black (1) Support 1080p HD mode (2) 50 miles range (3) Coaxial cable: 4m length (4) Connector type: F male to TV (5) v.s.w.r.: (6) Impedance: 75 ohms (7) Multi-directional capability (8) can receive all "free" channels (9) Gain: 28 DBI (with amplifier) (10) The color of the conventional antenna board is divided into white, black, transparent, support samples and drawings. (11) Neutral kraft paper packaging (12) Working frequency: 174~240mhz, 470~862mhz (13) Product size (mm): 250*223 * 0.6 (14) double-sided tape (15) radome color black (16) Operating temperature: -45～85°C (17) Storage temperature: -45～85°C Antenna 3 m + amplifier 1 m = total length 4 m extension cord Packing lncluded:  1 * Antenna  1 *   Signal Booster  1 *   IEC Converter  1 *   User Manual Note: 1.If you are using a flat screen HDTV, please check your TV's manual to make sure your TV has a built-in tuner for receiving over-the-air broadcasts. 2.You should retune your TV and digital box from time to time to ensure you are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. 3.Make sure your tuner can receive HD signals, otherwise you won't be able to receive and watch HD channels. When you buy it before, pls find out what channels are available in your area.  4.Signal quality determines the number of channels you can get, and image quality. Try to move your antenna and Re-scan TV channels to find the best location signal. When you re-scan for channels after moving the antenna. 5.The number of channels you get is determined by what's being broadcast in your area, how far away you are from the towers, and your surroundings.Areas with large obstructions such in valleys, mountains, buildings,etc will reduce effective range.Always re-scan for TV channels after moving the digital TV antenna, the result may be better. Moyen de paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Conditions de vente Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Features: Free For Life: Never pay your cable or satellite for television again! The antenna will save your time, energy and money. The indoor HDTV digital antenna is specially designed for receiving digital over-the-air (OTA) TV broadcasts from local television stations and can pull in all of your local news, weather, sitcom, kids and sports programming with no monthly contract or bills. Just plug it in to your television and let the antenna do all the work. High performance - extremely lightweight paper thin design,you can hide it behind the TV, lay flat on table; stick it high on window (stand moisture weather or exposed to sunshine). It'll pull in hundreds of crystal clear digital & HD shows! It can be safely painted to match any home decorations without affecting reception or signal loss. Specification: Name: Indoor digital TV receiving antenna Colour: Black (1) Support 1080p HD mode (2) 50 miles range (3) Coaxial cable: 4m length (4) Connector type: F male to TV (5) v.s.w.r.: (6) Impedance: 75 ohms (7) Multi-directional capability (8) can receive all "free" channels (9) Gain: 28 DBI (with amplifier) (10) The color of the conventional antenna board is divided into white, black, transparent, support samples and drawings. (11) Neutral kraft paper packaging (12) Working frequency: 174~240mhz, 470~862mhz (13) Product size (mm): 250*223 * 0.6 (14) double-sided tape (15) radome color black (16) Operating temperature: -45～85°C (17) Storage temperature: -45～85°C Antenna 3 m + amplifier 1 m = total length 4 m extension cord Packing lncluded:  1 * Antenna  1 *   Signal Booster  1 *   IEC Converter  1 *   User Manual Note: 1.If you are using a flat screen HDTV, please check your TV's manual to make sure your TV has a built-in tuner for receiving over-the-air broadcasts. 2.You should retune your TV and digital box from time to time to ensure you are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. 3.Make sure your tuner can receive HD signals, otherwise you won't be able to receive and watch HD channels. When you buy it before, pls find out what channels are available in your area.  4.Signal quality determines the number of channels you can get, and image quality. Try to move your antenna and Re-scan TV channels to find the best location signal. When you re-scan for channels after moving the antenna. 5.The number of channels you get is determined by what's being broadcast in your area, how far away you are from the towers, and your surroundings.Areas with large obstructions such in valleys, mountains, buildings,etc will reduce effective range.Always re-scan for TV channels after moving the digital TV antenna, the result may be better. PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 16-avr.-21 à 08:29:16 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter   Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 11-mai-19 à 14:32:07 Paris, le vendeur a ajouté les informations suivantes:

Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter   Description: This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. The number of channels you can receive is determined by what's being broadcast in your area. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. Check out what channels are available in your area first and how many you are able to receive. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. Works with any non-amplified TV fox antennas. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong. The amplifier may cause self-oscillations and result in fewer signals received.   Kindly Remind: If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. It is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. Do not forget to do a channel scan every time you move your antenna. Material: ABS Color: Black  Cable Length: 80cm/31.50in (Approx.) Frequency: 45-862 MHz Gain: 25dB Power Supply: 5V 1A Noise parent: Less than 4dB Quantity: 1 Set  Note: Transition: 1cm=10mm=0.39inch No retail package. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item.  Package includes: 1 X TV Fox Signal Amplifier 1 X Plug Converter Le 11-sept.-19 à 08:16:07 Paris, le vendeur a ajouté les informations suivantes:

product description: K2 DVB-T / T2 TV receiver 3D digital video terrestrial MPEG4 PVR HD 1080P set-top box TV box description: You are looking at the powerful DVB-T2 receiver that you can enjoy at home full HD1080P TV show, cool! feature: Full compliance with DVB-T / T2 and H.264, MPEG-4, MPEG-2 standard The maximum speed of traffic flow is at least 50 Mbit / s Support 3D interface Sleep timer Support teletext / subtitles / multilingual Powerful and efficient 7-day EPG feature USB 2.0 for PVR, TIMESHIFT, software upgrades and media file playback Video output resolution: 480i / 576i / 480p / 576p / 720p / 1080i / 1080P Automatic / manual channel servo function OSD languages: English, Russian, Czech, Danish, French, German, Italian, Portuguese, Spanish, Swedish and so on PAL / NTSC automatic conversion Can store up to 1000 channels of television and radio programs Support logical channel number (LCN) Various channel editing functions (favorites, move, lock, skip, delete, rename, find, sort) Package Contents:1 Set TV Top Box   product description: K2 DVB-T / T2 TV receiver 3D digital video terrestrial MPEG4 PVR HD 1080P set-top box TV box description: You are looking at the powerful DVB-T2 receiver that you can enjoy at home full HD1080P TV show, cool! feature: Full compliance with DVB-T / T2 and H.264, MPEG-4, MPEG-2 standard The maximum speed of traffic flow is at least 50 Mbit / s Support 3D interface Sleep timer Support teletext / subtitles / multilingual Powerful and efficient 7-day EPG feature USB 2.0 for PVR, TIMESHIFT, software upgrades and media file playback Video output resolution: 480i / 576i / 480p / 576p / 720p / 1080i / 1080P Automatic / manual channel servo function OSD languages: English, Russian, Czech, Danish, French, German, Italian, Portuguese, Spanish, Swedish and so on PAL / NTSC automatic conversion Can store up to 1000 channels of television and radio programs Support logical channel number (LCN) Various channel editing functions (favorites, move, lock, skip, delete, rename, find, sort) Package Contents:1 Set TV Top Box Le 02-nov.-19 à 12:31:16 Paris, le vendeur a ajouté les informations suivantes:

Amplificateur signal aérien numérique HDTV Câble TV appoint Antenna HD Channel M Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable: 1.5C-2V / Black L=0.6M 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Features: 1. This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. 2. The number of channels you can receive is determined by what's being broadcast in your area. 3. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. 4. Check out what channels are available in your area first and how many you are able to receive. 5. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. 6. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong.The amplifier may cause self-oscillations and result in fewer signals received. Kindly Remind: 1.If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. 2.it is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. 3.Do not forget to do a channel scan every time you move your antenna. Package List: 1 x HDTV Antenna Signal Amplifier 1 x Converter Plug Moyen de paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Conditions de vente Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable: 1.5C-2V / Black L=0.6M 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Features: 1. This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. 2. The number of channels you can receive is determined by what's being broadcast in your area. 3. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. 4. Check out what channels are available in your area first and how many you are able to receive. 5. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. 6. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong.The amplifier may cause self-oscillations and result in fewer signals received. Kindly Remind: 1.If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. 2.it is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. 3.Do not forget to do a channel scan every time you move your antenna. Package List: 1 x HDTV Antenna Signal Amplifier 1 x Converter Plug PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 09-mai-19 à 10:04:39 Paris, le vendeur a ajouté les informations suivantes:

Amplificateur signal aérien numérique HDTV Câble TV appoint Antenna HD BM Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable: 1.5C-2V / Black L=0.6M 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Features: 1. This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. 2. The number of channels you can receive is determined by what's being broadcast in your area. 3. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. 4. Check out what channels are available in your area first and how many you are able to receive. 5. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. 6. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong.The amplifier may cause self-oscillations and result in fewer signals received. Kindly Remind: 1.If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. 2.it is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. 3.Do not forget to do a channel scan every time you move your antenna. Package List: 1 x HDTV Antenna Signal Amplifier 1 x Converter Plug Moyen de Paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Politique de Retour Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable: 1.5C-2V / Black L=0.6M 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Features: 1. This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. 2. The number of channels you can receive is determined by what's being broadcast in your area. 3. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. 4. Check out what channels are available in your area first and how many you are able to receive. 5. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. 6. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong.The amplifier may cause self-oscillations and result in fewer signals received. Kindly Remind: 1.If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. 2.it is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. 3.Do not forget to do a channel scan every time you move your antenna. Package List: 1 x HDTV Antenna Signal Amplifier 1 x Converter Plug PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 09-déc.-19 à 18:06:18 Paris, le vendeur a ajouté les informations suivantes:

Amplificateur signal aérien numérique HDTV Câble TV appoint HD Channel Antenna Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable: 1.5C-2V / Black L=0.6M 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Features: 1. This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. 2. The number of channels you can receive is determined by what's being broadcast in your area. 3. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. 4. Check out what channels are available in your area first and how many you are able to receive. 5. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. 6. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong.The amplifier may cause self-oscillations and result in fewer signals received. Kindly Remind: 1.If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. 2.it is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. 3.Do not forget to do a channel scan every time you move your antenna. Package List: 1 x HDTV Antenna Signal Amplifier 1 x Converter Plug Moyen de paiement Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Livraison Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Conditions de vente Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Sur nous Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 50 miles 6. Cable: 1.5C-2V / Black L=0.6M 7. Connectors: F Male 8. Polarization：Linear 9. Voltage: 5V 10. Power Supply Connector: USB 11. Current Consumption: 20mA 12. Operation Temperature: -45 ~ 85℃ 13. Storage Temperature: -45 ~ 85℃ 14. Compatible with 720p, 1080i, 1080p/ ATSC Features: 1. This amplifier can make your TV antenna get more channels, improve the clarity of the frequency, expand the receiving range. 2. The number of channels you can receive is determined by what's being broadcast in your area. 3. Channel reception is dependent upon distance from broadcast towers, terrain, surroundings, and weather. 4. Check out what channels are available in your area first and how many you are able to receive. 5. If your TV picture is not crystal clear, or you cannot receive the weak signals from far away towers, use this amplifier to boost the weakened signals. 6. We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong.The amplifier may cause self-oscillations and result in fewer signals received. Kindly Remind: 1.If clients use the amplifier but handiest to locate the signal isn't sturdy, please try transferring your antenna to a distinct place. 2.it is best to vicinity the antenna in line of sight with the tv tower(s) and keep away from obstructions. 3.Do not forget to do a channel scan every time you move your antenna. Package List: 1 x HDTV Antenna Signal Amplifier 1 x Converter Plug PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 10-janv.-20 à 13:36:14 Paris, le vendeur a ajouté les informations suivantes:

Note:Please confirm whether there is a local signal before buying Features: Sortware Features Fully DVB Compliant and H.264/MPEG-2/MPEG-4/AVS Support Full / Blind Search on Single / Multiple Satellites Support Auto / Manual Search on Terrestrial Network Support DiSEqC 1.0 / 1.1 / 1.2 / USALS / Unicable Powerful Service Control by Favorites, Lock, Skip, Move, Rename & Delete Support 7-day EPG, Event Recording by EPG Support Multi-Language (OSD & Menu) Maximum 4000 Service Programmable TV System: Auto / PAL / NTSC Aspect Mode: Auto / 4:3LetterBox / 4:3PanScan / 16:9 Video Output Resolution: 480i/576i/480p/576p/720p/1080i/1080P Support Audio Description (Thailand Standard) Support Teletext, Subtitle Support Find / Zoom Support Parental Lock Support Software Upgrade by OTA/USB USB 2.0 Host Support (Time Shift, PVR, MP3 Player & Picture Viewer & Media Player) Video Decoder  MPEG2 MP#ML for SD  MPEG2 MP#HL for HD  H.264/AVC MP#L3.0 for SD  H.264/AVC HP#L4.1 for HD  AVS Jizhun profile #L6.0  MPEG4 Simple profile # all levels  MPEG4 Advanced Simple Profile# L5 without GMC, data partitioning and Reversible VLC.  MPEG4 Xvid1.3.2 without GMC  MPEG4 DivX without GMC  MPEG4 H263 baseline profile Audio Decoder  MPEG-1 LayerI & Layer II Musicam  MPEG-2 AAC-LC  MPEG4 HE-AAC  AAC 5.1 Powerful Multimedia Features Media Codec mpeg2, m2ts, ts, avi, mkv, asf, 3g2, 3gp, mp4, mov, flv, f4v, vob, dvix Audio Codec wav, mp3 Photo Codec jpeg, gif, bmp, png   Specification: Hardware: CPU: Montage VT6000 Memory: 32X16Mbit DDR2 f #400MHz, Flash: 4M bytes Demodulator Type: M88DM6000 S2 TUNER: M88TS2022 T2 TUNER: MaxLinear MXL 608 Front Panel: USB 2.0 Embedded One Host, 4-digit LED display on front panel Red LED Standby,green LED Lock Panel KEY, POWER, CH+,CH- Rear Panel: S2 LNB IN input connector IEC60169-2 T2 ANT input connector IEC-162-2(IEC Female) HDMI V1.3, RCA CVBS AL AR Connector x1 Ypbpr RCAx1, Coaxial x1, Power AC100~240V 50Hz/60Hz DVB-T2 Demodulation: Terrisal Receiver StandardDVB-T2/T(EN_302755 V1.3.1/EN 300744) Input RF Frequency 48~866MHZ, Bandwidth6MHz,7MHz,8MHz Constellation QPSK 16-QAM 64-QAM and 256-QAM FEC 1/2, 3/5,2/3, 3/4,4/5,5/6 Guard Interval1/128 1/32 1/16 19/256 1/8 19/128 1/4 FFT Mode 2K/ 8K/32K, Support Single and multiple PLPS Input level -83~ -5dBm DVB-S2 Channel Decoder: Frequency Range 950MHz-2150MHz, Sensitivity Level - 10~ - 81dBm Mode IFFT 2k,8k, FEC Mode 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Guard intervals 1/4,1/8,1/16,1/32, Constellation QPSK.8PSK.16APSK. Support bisskey,Not support Dobly(AC-3) "Neighboring channels immunity and Protection" According to ETSI TR 101 190 V1.2.1 Active Ant Power 13/18V DC # 500mA MAX,Overload Protection note: 1.S2 Signals,T2 Signals,two mold need to switch.          2.this product does not support Dobly or AC-3,if you want to watch the channels of this format,it will be no sound.              When you purchase this product before,pls consider carefully.thanks package: 1*Gift Box 1*AV Cable Optional 1*IR Remote Control 1*User Manual   Note:Please confirm whether there is a local signal before buying Features: Sortware Features Fully DVB Compliant and H.264/MPEG-2/MPEG-4/AVS Support Full / Blind Search on Single / Multiple Satellites Support Auto / Manual Search on Terrestrial Network Support DiSEqC 1.0 / 1.1 / 1.2 / USALS / Unicable Powerful Service Control by Favorites, Lock, Skip, Move, Rename & Delete Support 7-day EPG, Event Recording by EPG Support Multi-Language (OSD & Menu) Maximum 4000 Service Programmable TV System: Auto / PAL / NTSC Aspect Mode: Auto / 4:3LetterBox / 4:3PanScan / 16:9 Video Output Resolution: 480i/576i/480p/576p/720p/1080i/1080P Support Audio Description (Thailand Standard) Support Teletext, Subtitle Support Find / Zoom Support Parental Lock Support Software Upgrade by OTA/USB USB 2.0 Host Support (Time Shift, PVR, MP3 Player & Picture Viewer & Media Player) Video Decoder  MPEG2 MP#ML for SD  MPEG2 MP#HL for HD  H.264/AVC MP#L3.0 for SD  H.264/AVC HP#L4.1 for HD  AVS Jizhun profile #L6.0  MPEG4 Simple profile # all levels  MPEG4 Advanced Simple Profile# L5 without GMC, data partitioning and Reversible VLC.  MPEG4 Xvid1.3.2 without GMC  MPEG4 DivX without GMC  MPEG4 H263 baseline profile Audio Decoder  MPEG-1 LayerI & Layer II Musicam  MPEG-2 AAC-LC  MPEG4 HE-AAC  AAC 5.1 Powerful Multimedia Features Media Codec mpeg2, m2ts, ts, avi, mkv, asf, 3g2, 3gp, mp4, mov, flv, f4v, vob, dvix Audio Codec wav, mp3 Photo Codec jpeg, gif, bmp, png   Specification: Hardware: CPU: Montage VT6000 Memory: 32X16Mbit DDR2 f #400MHz, Flash: 4M bytes Demodulator Type: M88DM6000 S2 TUNER: M88TS2022 T2 TUNER: MaxLinear MXL 608 Front Panel: USB 2.0 Embedded One Host, 4-digit LED display on front panel Red LED Standby,green LED Lock Panel KEY, POWER, CH+,CH- Rear Panel: S2 LNB IN input connector IEC60169-2 T2 ANT input connector IEC-162-2(IEC Female) HDMI V1.3, RCA CVBS AL AR Connector x1 Ypbpr RCAx1, Coaxial x1, Power AC100~240V 50Hz/60Hz DVB-T2 Demodulation: Terrisal Receiver StandardDVB-T2/T(EN_302755 V1.3.1/EN 300744) Input RF Frequency 48~866MHZ, Bandwidth6MHz,7MHz,8MHz Constellation QPSK 16-QAM 64-QAM and 256-QAM FEC 1/2, 3/5,2/3, 3/4,4/5,5/6 Guard Interval1/128 1/32 1/16 19/256 1/8 19/128 1/4 FFT Mode 2K/ 8K/32K, Support Single and multiple PLPS Input level -83~ -5dBm DVB-S2 Channel Decoder: Frequency Range 950MHz-2150MHz, Sensitivity Level - 10~ - 81dBm Mode IFFT 2k,8k, FEC Mode 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Guard intervals 1/4,1/8,1/16,1/32, Constellation QPSK.8PSK.16APSK. Support bisskey,Not support Dobly(AC-3) "Neighboring channels immunity and Protection" According to ETSI TR 101 190 V1.2.1 Active Ant Power 13/18V DC # 500mA MAX,Overload Protection note: 1.S2 Signals,T2 Signals,two mold need to switch.          2.this product does not support Dobly or AC-3,if you want to watch the channels of this format,it will be no sound.              When you purchase this product before,pls consider carefully.thanks package: 1*Gift Box 1*AV Cable Optional 1*IR Remote Control 1*User Manual Le 18-déc.-18 à 01:47:08 Paris, le vendeur a ajouté les informations suivantes:

Note:Please confirm whether there is a local signal before buying Features: Sortware Features Fully DVB Compliant and H.264/MPEG-2/MPEG-4/AVS Support Full / Blind Search on Single / Multiple Satellites Support Auto / Manual Search on Terrestrial Network Support DiSEqC 1.0 / 1.1 / 1.2 / USALS / Unicable Powerful Service Control by Favorites, Lock, Skip, Move, Rename & Delete Support 7-day EPG, Event Recording by EPG Support Multi-Language (OSD & Menu) Maximum 4000 Service Programmable TV System: Auto / PAL / NTSC Aspect Mode: Auto / 4:3LetterBox / 4:3PanScan / 16:9 Video Output Resolution: 480i/576i/480p/576p/720p/1080i/1080P Support Audio Description (Thailand Standard) Support Teletext, Subtitle Support Find / Zoom Support Parental Lock Support Software Upgrade by OTA/USB USB 2.0 Host Support (Time Shift, PVR, MP3 Player & Picture Viewer & Media Player) Video Decoder  MPEG2 MP#ML for SD  MPEG2 MP#HL for HD  H.264/AVC MP#L3.0 for SD  H.264/AVC HP#L4.1 for HD  AVS Jizhun profile #L6.0  MPEG4 Simple profile # all levels  MPEG4 Advanced Simple Profile# L5 without GMC, data partitioning and Reversible VLC.  MPEG4 Xvid1.3.2 without GMC  MPEG4 DivX without GMC  MPEG4 H263 baseline profile Audio Decoder  MPEG-1 LayerI & Layer II Musicam  MPEG-2 AAC-LC  MPEG4 HE-AAC  AAC 5.1 Powerful Multimedia Features Media Codec mpeg2, m2ts, ts, avi, mkv, asf, 3g2, 3gp, mp4, mov, flv, f4v, vob, dvix Audio Codec wav, mp3 Photo Codec jpeg, gif, bmp, png   Specification: Hardware: CPU: Montage VT6000 Memory: 32X16Mbit DDR2 f #400MHz, Flash: 4M bytes Demodulator Type: M88DM6000 S2 TUNER: M88TS2022 T2 TUNER: MaxLinear MXL 608 Front Panel: USB 2.0 Embedded One Host, 4-digit LED display on front panel Red LED Standby,green LED Lock Panel KEY, POWER, CH+,CH- Rear Panel: S2 LNB IN input connector IEC60169-2 T2 ANT input connector IEC-162-2(IEC Female) HDMI V1.3, RCA CVBS AL AR Connector x1 Ypbpr RCAx1, Coaxial x1, Power AC100~240V 50Hz/60Hz DVB-T2 Demodulation: Terrisal Receiver StandardDVB-T2/T(EN_302755 V1.3.1/EN 300744) Input RF Frequency 48~866MHZ, Bandwidth6MHz,7MHz,8MHz Constellation QPSK 16-QAM 64-QAM and 256-QAM FEC 1/2, 3/5,2/3, 3/4,4/5,5/6 Guard Interval1/128 1/32 1/16 19/256 1/8 19/128 1/4 FFT Mode 2K/ 8K/32K, Support Single and multiple PLPS Input level -83~ -5dBm DVB-S2 Channel Decoder: Frequency Range 950MHz-2150MHz, Sensitivity Level - 10~ - 81dBm Mode IFFT 2k,8k, FEC Mode 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Guard intervals 1/4,1/8,1/16,1/32, Constellation QPSK.8PSK.16APSK. Support bisskey,Not support Dobly(AC-3) "Neighboring channels immunity and Protection" According to ETSI TR 101 190 V1.2.1 Active Ant Power 13/18V DC # 500mA MAX,Overload Protection note: 1.S2 Signals,T2 Signals,two mold need to switch.          2.this product does not support Dobly or AC-3,if you want to watch the channels of this format,it will be no sound.              When you purchase this product before,pls consider carefully.thanks package: 1*Gift Box 1*AV Cable Optional 1*IR Remote Control 1*User Manual   Note:Please confirm whether there is a local signal before buying Features: Sortware Features Fully DVB Compliant and H.264/MPEG-2/MPEG-4/AVS Support Full / Blind Search on Single / Multiple Satellites Support Auto / Manual Search on Terrestrial Network Support DiSEqC 1.0 / 1.1 / 1.2 / USALS / Unicable Powerful Service Control by Favorites, Lock, Skip, Move, Rename & Delete Support 7-day EPG, Event Recording by EPG Support Multi-Language (OSD & Menu) Maximum 4000 Service Programmable TV System: Auto / PAL / NTSC Aspect Mode: Auto / 4:3LetterBox / 4:3PanScan / 16:9 Video Output Resolution: 480i/576i/480p/576p/720p/1080i/1080P Support Audio Description (Thailand Standard) Support Teletext, Subtitle Support Find / Zoom Support Parental Lock Support Software Upgrade by OTA/USB USB 2.0 Host Support (Time Shift, PVR, MP3 Player & Picture Viewer & Media Player) Video Decoder  MPEG2 MP#ML for SD  MPEG2 MP#HL for HD  H.264/AVC MP#L3.0 for SD  H.264/AVC HP#L4.1 for HD  AVS Jizhun profile #L6.0  MPEG4 Simple profile # all levels  MPEG4 Advanced Simple Profile# L5 without GMC, data partitioning and Reversible VLC.  MPEG4 Xvid1.3.2 without GMC  MPEG4 DivX without GMC  MPEG4 H263 baseline profile Audio Decoder  MPEG-1 LayerI & Layer II Musicam  MPEG-2 AAC-LC  MPEG4 HE-AAC  AAC 5.1 Powerful Multimedia Features Media Codec mpeg2, m2ts, ts, avi, mkv, asf, 3g2, 3gp, mp4, mov, flv, f4v, vob, dvix Audio Codec wav, mp3 Photo Codec jpeg, gif, bmp, png   Specification: Hardware: CPU: Montage VT6000 Memory: 32X16Mbit DDR2 f #400MHz, Flash: 4M bytes Demodulator Type: M88DM6000 S2 TUNER: M88TS2022 T2 TUNER: MaxLinear MXL 608 Front Panel: USB 2.0 Embedded One Host, 4-digit LED display on front panel Red LED Standby,green LED Lock Panel KEY, POWER, CH+,CH- Rear Panel: S2 LNB IN input connector IEC60169-2 T2 ANT input connector IEC-162-2(IEC Female) HDMI V1.3, RCA CVBS AL AR Connector x1 Ypbpr RCAx1, Coaxial x1, Power AC100~240V 50Hz/60Hz DVB-T2 Demodulation: Terrisal Receiver StandardDVB-T2/T(EN_302755 V1.3.1/EN 300744) Input RF Frequency 48~866MHZ, Bandwidth6MHz,7MHz,8MHz Constellation QPSK 16-QAM 64-QAM and 256-QAM FEC 1/2, 3/5,2/3, 3/4,4/5,5/6 Guard Interval1/128 1/32 1/16 19/256 1/8 19/128 1/4 FFT Mode 2K/ 8K/32K, Support Single and multiple PLPS Input level -83~ -5dBm DVB-S2 Channel Decoder: Frequency Range 950MHz-2150MHz, Sensitivity Level - 10~ - 81dBm Mode IFFT 2k,8k, FEC Mode 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Guard intervals 1/4,1/8,1/16,1/32, Constellation QPSK.8PSK.16APSK. Support bisskey,Not support Dobly(AC-3) "Neighboring channels immunity and Protection" According to ETSI TR 101 190 V1.2.1 Active Ant Power 13/18V DC # 500mA MAX,Overload Protection note: 1.S2 Signals,T2 Signals,two mold need to switch.          2.this product does not support Dobly or AC-3,if you want to watch the channels of this format,it will be no sound.              When you purchase this product before,pls consider carefully.thanks package: 1*Gift Box 1*AV Cable Optional 1*IR Remote Control 1*User Manual Le 15-avr.-19 à 10:38:40 Paris, le vendeur a ajouté les informations suivantes:

Note:Please confirm whether there is a local signal before buying Features: Sortware Features Fully DVB Compliant and H.264/MPEG-2/MPEG-4/AVS Support Full / Blind Search on Single / Multiple Satellites Support Auto / Manual Search on Terrestrial Network Support DiSEqC 1.0 / 1.1 / 1.2 / USALS / Unicable Powerful Service Control by Favorites, Lock, Skip, Move, Rename & Delete Support 7-day EPG, Event Recording by EPG Support Multi-Language (OSD & Menu) Maximum 4000 Service Programmable TV System: Auto / PAL / NTSC Aspect Mode: Auto / 4:3LetterBox / 4:3PanScan / 16:9 Video Output Resolution: 480i/576i/480p/576p/720p/1080i/1080P Support Audio Description (Thailand Standard) Support Teletext, Subtitle Support Find / Zoom Support Parental Lock Support Software Upgrade by OTA/USB USB 2.0 Host Support (Time Shift, PVR, MP3 Player & Picture Viewer & Media Player) Video Decoder  MPEG2 MP#ML for SD  MPEG2 MP#HL for HD  H.264/AVC MP#L3.0 for SD  H.264/AVC HP#L4.1 for HD  AVS Jizhun profile #L6.0  MPEG4 Simple profile # all levels  MPEG4 Advanced Simple Profile# L5 without GMC, data partitioning and Reversible VLC.  MPEG4 Xvid1.3.2 without GMC  MPEG4 DivX without GMC  MPEG4 H263 baseline profile Audio Decoder  MPEG-1 LayerI & Layer II Musicam  MPEG-2 AAC-LC  MPEG4 HE-AAC  AAC 5.1 Powerful Multimedia Features Media Codec mpeg2, m2ts, ts, avi, mkv, asf, 3g2, 3gp, mp4, mov, flv, f4v, vob, dvix Audio Codec wav, mp3 Photo Codec jpeg, gif, bmp, png   Specification: Hardware: CPU: Montage VT6000 Memory: 32X16Mbit DDR2 f #400MHz, Flash: 4M bytes Demodulator Type: M88DM6000 S2 TUNER: M88TS2022 T2 TUNER: MaxLinear MXL 608 Front Panel: USB 2.0 Embedded One Host, 4-digit LED display on front panel Red LED Standby,green LED Lock Panel KEY, POWER, CH+,CH- Rear Panel: S2 LNB IN input connector IEC60169-2 T2 ANT input connector IEC-162-2(IEC Female) HDMI V1.3, RCA CVBS AL AR Connector x1 Ypbpr RCAx1, Coaxial x1, Power AC100~240V 50Hz/60Hz DVB-T2 Demodulation: Terrisal Receiver StandardDVB-T2/T(EN_302755 V1.3.1/EN 300744) Input RF Frequency 48~866MHZ, Bandwidth6MHz,7MHz,8MHz Constellation QPSK 16-QAM 64-QAM and 256-QAM FEC 1/2, 3/5,2/3, 3/4,4/5,5/6 Guard Interval1/128 1/32 1/16 19/256 1/8 19/128 1/4 FFT Mode 2K/ 8K/32K, Support Single and multiple PLPS Input level -83~ -5dBm DVB-S2 Channel Decoder: Frequency Range 950MHz-2150MHz, Sensitivity Level - 10~ - 81dBm Mode IFFT 2k,8k, FEC Mode 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Guard intervals 1/4,1/8,1/16,1/32, Constellation QPSK.8PSK.16APSK. Support bisskey,Not support Dobly(AC-3) "Neighboring channels immunity and Protection" According to ETSI TR 101 190 V1.2.1 Active Ant Power 13/18V DC # 500mA MAX,Overload Protection note: 1.S2 Signals,T2 Signals,two mold need to switch.          2.this product does not support Dobly or AC-3,if you want to watch the channels of this format,it will be no sound.              When you purchase this product before,pls consider carefully.thanks package: 1*Gift Box 1*AV Cable Optional 1*IR Remote Control 1*User Manual   Note:Please confirm whether there is a local signal before buying Features: Sortware Features Fully DVB Compliant and H.264/MPEG-2/MPEG-4/AVS Support Full / Blind Search on Single / Multiple Satellites Support Auto / Manual Search on Terrestrial Network Support DiSEqC 1.0 / 1.1 / 1.2 / USALS / Unicable Powerful Service Control by Favorites, Lock, Skip, Move, Rename & Delete Support 7-day EPG, Event Recording by EPG Support Multi-Language (OSD & Menu) Maximum 4000 Service Programmable TV System: Auto / PAL / NTSC Aspect Mode: Auto / 4:3LetterBox / 4:3PanScan / 16:9 Video Output Resolution: 480i/576i/480p/576p/720p/1080i/1080P Support Audio Description (Thailand Standard) Support Teletext, Subtitle Support Find / Zoom Support Parental Lock Support Software Upgrade by OTA/USB USB 2.0 Host Support (Time Shift, PVR, MP3 Player & Picture Viewer & Media Player) Video Decoder  MPEG2 MP#ML for SD  MPEG2 MP#HL for HD  H.264/AVC MP#L3.0 for SD  H.264/AVC HP#L4.1 for HD  AVS Jizhun profile #L6.0  MPEG4 Simple profile # all levels  MPEG4 Advanced Simple Profile# L5 without GMC, data partitioning and Reversible VLC.  MPEG4 Xvid1.3.2 without GMC  MPEG4 DivX without GMC  MPEG4 H263 baseline profile Audio Decoder  MPEG-1 LayerI & Layer II Musicam  MPEG-2 AAC-LC  MPEG4 HE-AAC  AAC 5.1 Powerful Multimedia Features Media Codec mpeg2, m2ts, ts, avi, mkv, asf, 3g2, 3gp, mp4, mov, flv, f4v, vob, dvix Audio Codec wav, mp3 Photo Codec jpeg, gif, bmp, png   Specification: Hardware: CPU: Montage VT6000 Memory: 32X16Mbit DDR2 f #400MHz, Flash: 4M bytes Demodulator Type: M88DM6000 S2 TUNER: M88TS2022 T2 TUNER: MaxLinear MXL 608 Front Panel: USB 2.0 Embedded One Host, 4-digit LED display on front panel Red LED Standby,green LED Lock Panel KEY, POWER, CH+,CH- Rear Panel: S2 LNB IN input connector IEC60169-2 T2 ANT input connector IEC-162-2(IEC Female) HDMI V1.3, RCA CVBS AL AR Connector x1 Ypbpr RCAx1, Coaxial x1, Power AC100~240V 50Hz/60Hz DVB-T2 Demodulation: Terrisal Receiver StandardDVB-T2/T(EN_302755 V1.3.1/EN 300744) Input RF Frequency 48~866MHZ, Bandwidth6MHz,7MHz,8MHz Constellation QPSK 16-QAM 64-QAM and 256-QAM FEC 1/2, 3/5,2/3, 3/4,4/5,5/6 Guard Interval1/128 1/32 1/16 19/256 1/8 19/128 1/4 FFT Mode 2K/ 8K/32K, Support Single and multiple PLPS Input level -83~ -5dBm DVB-S2 Channel Decoder: Frequency Range 950MHz-2150MHz, Sensitivity Level - 10~ - 81dBm Mode IFFT 2k,8k, FEC Mode 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Guard intervals 1/4,1/8,1/16,1/32, Constellation QPSK.8PSK.16APSK. Support bisskey,Not support Dobly(AC-3) "Neighboring channels immunity and Protection" According to ETSI TR 101 190 V1.2.1 Active Ant Power 13/18V DC # 500mA MAX,Overload Protection note: 1.S2 Signals,T2 Signals,two mold need to switch.          2.this product does not support Dobly or AC-3,if you want to watch the channels of this format,it will be no sound.              When you purchase this product before,pls consider carefully.thanks package: 1*Gift Box 1*AV Cable Optional 1*IR Remote Control 1*User Manual Le 04-juil.-19 à 16:25:08 Paris, le vendeur a ajouté les informations suivantes:

Note:Please confirm whether there is a local signal before buying Features: Sortware Features Fully DVB Compliant and H.264/MPEG-2/MPEG-4/AVS Support Full / Blind Search on Single / Multiple Satellites Support Auto / Manual Search on Terrestrial Network Support DiSEqC 1.0 / 1.1 / 1.2 / USALS / Unicable Powerful Service Control by Favorites, Lock, Skip, Move, Rename & Delete Support 7-day EPG, Event Recording by EPG Support Multi-Language (OSD & Menu) Maximum 4000 Service Programmable TV System: Auto / PAL / NTSC Aspect Mode: Auto / 4:3LetterBox / 4:3PanScan / 16:9 Video Output Resolution: 480i/576i/480p/576p/720p/1080i/1080P Support Audio Description (Thailand Standard) Support Teletext, Subtitle Support Find / Zoom Support Parental Lock Support Software Upgrade by OTA/USB USB 2.0 Host Support (Time Shift, PVR, MP3 Player & Picture Viewer & Media Player) Video Decoder  MPEG2 MP#ML for SD  MPEG2 MP#HL for HD  H.264/AVC MP#L3.0 for SD  H.264/AVC HP#L4.1 for HD  AVS Jizhun profile #L6.0  MPEG4 Simple profile # all levels  MPEG4 Advanced Simple Profile# L5 without GMC, data partitioning and Reversible VLC.  MPEG4 Xvid1.3.2 without GMC  MPEG4 DivX without GMC  MPEG4 H263 baseline profile Audio Decoder  MPEG-1 LayerI & Layer II Musicam  MPEG-2 AAC-LC  MPEG4 HE-AAC  AAC 5.1 Powerful Multimedia Features Media Codec mpeg2, m2ts, ts, avi, mkv, asf, 3g2, 3gp, mp4, mov, flv, f4v, vob, dvix Audio Codec wav, mp3 Photo Codec jpeg, gif, bmp, png   Specification: Hardware: CPU: Montage VT6000 Memory: 32X16Mbit DDR2 f #400MHz, Flash: 4M bytes Demodulator Type: M88DM6000 S2 TUNER: M88TS2022 T2 TUNER: MaxLinear MXL 608 Front Panel: USB 2.0 Embedded One Host, 4-digit LED display on front panel Red LED Standby,green LED Lock Panel KEY, POWER, CH+,CH- Rear Panel: S2 LNB IN input connector IEC60169-2 T2 ANT input connector IEC-162-2(IEC Female) HDMI V1.3, RCA CVBS AL AR Connector x1 Ypbpr RCAx1, Coaxial x1, Power AC100~240V 50Hz/60Hz DVB-T2 Demodulation: Terrisal Receiver StandardDVB-T2/T(EN_302755 V1.3.1/EN 300744) Input RF Frequency 48~866MHZ, Bandwidth6MHz,7MHz,8MHz Constellation QPSK 16-QAM 64-QAM and 256-QAM FEC 1/2, 3/5,2/3, 3/4,4/5,5/6 Guard Interval1/128 1/32 1/16 19/256 1/8 19/128 1/4 FFT Mode 2K/ 8K/32K, Support Single and multiple PLPS Input level -83~ -5dBm DVB-S2 Channel Decoder: Frequency Range 950MHz-2150MHz, Sensitivity Level - 10~ - 81dBm Mode IFFT 2k,8k, FEC Mode 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Guard intervals 1/4,1/8,1/16,1/32, Constellation QPSK.8PSK.16APSK. Support bisskey,Not support Dobly(AC-3) "Neighboring channels immunity and Protection" According to ETSI TR 101 190 V1.2.1 Active Ant Power 13/18V DC # 500mA MAX,Overload Protection note: 1.S2 Signals,T2 Signals,two mold need to switch.          2.this product does not support Dobly or AC-3,if you want to watch the channels of this format,it will be no sound.              When you purchase this product before,pls consider carefully.thanks package: 1*Gift Box 1*AV Cable Optional 1*IR Remote Control 1*User Manual   Note:Please confirm whether there is a local signal before buying Features: Sortware Features Fully DVB Compliant and H.264/MPEG-2/MPEG-4/AVS Support Full / Blind Search on Single / Multiple Satellites Support Auto / Manual Search on Terrestrial Network Support DiSEqC 1.0 / 1.1 / 1.2 / USALS / Unicable Powerful Service Control by Favorites, Lock, Skip, Move, Rename & Delete Support 7-day EPG, Event Recording by EPG Support Multi-Language (OSD & Menu) Maximum 4000 Service Programmable TV System: Auto / PAL / NTSC Aspect Mode: Auto / 4:3LetterBox / 4:3PanScan / 16:9 Video Output Resolution: 480i/576i/480p/576p/720p/1080i/1080P Support Audio Description (Thailand Standard) Support Teletext, Subtitle Support Find / Zoom Support Parental Lock Support Software Upgrade by OTA/USB USB 2.0 Host Support (Time Shift, PVR, MP3 Player & Picture Viewer & Media Player) Video Decoder  MPEG2 MP#ML for SD  MPEG2 MP#HL for HD  H.264/AVC MP#L3.0 for SD  H.264/AVC HP#L4.1 for HD  AVS Jizhun profile #L6.0  MPEG4 Simple profile # all levels  MPEG4 Advanced Simple Profile# L5 without GMC, data partitioning and Reversible VLC.  MPEG4 Xvid1.3.2 without GMC  MPEG4 DivX without GMC  MPEG4 H263 baseline profile Audio Decoder  MPEG-1 LayerI & Layer II Musicam  MPEG-2 AAC-LC  MPEG4 HE-AAC  AAC 5.1 Powerful Multimedia Features Media Codec mpeg2, m2ts, ts, avi, mkv, asf, 3g2, 3gp, mp4, mov, flv, f4v, vob, dvix Audio Codec wav, mp3 Photo Codec jpeg, gif, bmp, png   Specification: Hardware: CPU: Montage VT6000 Memory: 32X16Mbit DDR2 f #400MHz, Flash: 4M bytes Demodulator Type: M88DM6000 S2 TUNER: M88TS2022 T2 TUNER: MaxLinear MXL 608 Front Panel: USB 2.0 Embedded One Host, 4-digit LED display on front panel Red LED Standby,green LED Lock Panel KEY, POWER, CH+,CH- Rear Panel: S2 LNB IN input connector IEC60169-2 T2 ANT input connector IEC-162-2(IEC Female) HDMI V1.3, RCA CVBS AL AR Connector x1 Ypbpr RCAx1, Coaxial x1, Power AC100~240V 50Hz/60Hz DVB-T2 Demodulation: Terrisal Receiver StandardDVB-T2/T(EN_302755 V1.3.1/EN 300744) Input RF Frequency 48~866MHZ, Bandwidth6MHz,7MHz,8MHz Constellation QPSK 16-QAM 64-QAM and 256-QAM FEC 1/2, 3/5,2/3, 3/4,4/5,5/6 Guard Interval1/128 1/32 1/16 19/256 1/8 19/128 1/4 FFT Mode 2K/ 8K/32K, Support Single and multiple PLPS Input level -83~ -5dBm DVB-S2 Channel Decoder: Frequency Range 950MHz-2150MHz, Sensitivity Level - 10~ - 81dBm Mode IFFT 2k,8k, FEC Mode 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Guard intervals 1/4,1/8,1/16,1/32, Constellation QPSK.8PSK.16APSK. Support bisskey,Not support Dobly(AC-3) "Neighboring channels immunity and Protection" According to ETSI TR 101 190 V1.2.1 Active Ant Power 13/18V DC # 500mA MAX,Overload Protection note: 1.S2 Signals,T2 Signals,two mold need to switch.          2.this product does not support Dobly or AC-3,if you want to watch the channels of this format,it will be no sound.              When you purchase this product before,pls consider carefully.thanks package: 1*Gift Box 1*AV Cable Optional 1*IR Remote Control 1*User Manual Le 04-sept.-19 à 18:38:33 Paris, le vendeur a ajouté les informations suivantes:

Enceintes Accessoires mobiles Code EAN: 6925490154917 En-tête / Fabricant: KeWalker Type de Produit: Enceintes Titre: Hifi Portable Bluetooth haut-parleur FM Radio Move KTV 3D unité de son sans fil Surround TV barre de son caisson de basses 15W haut-parleur extérieur + micro

Features: Universal connector, suitable for all countries. Innovative flat, razor-thin antenna design. It has high gain and low error rate digital tv signal reception,and a significant signal enhancement in actual use. Increase the reception of tv programs, and eliminate the pause the mosaic images. Multi-directional design pulls in signals from all directions. Fast and easy to set up -Unwrap,plug it in and Scan channels. You can put it on the wall, on the table or on the window (strongly recommended) and it will make you enjoy watching crystal clear digital &HD shows with many opportunities. Set up guide: Step1: Connect the end of attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box,Plug the USV plug into the USB port of the TV or Digital Converber Box. Step 2: Hand held the antenna, near the window, place it horizontally or vertically Step 3: In the TV’ s or STB ’ s setup menu, set the tuner mode to  “ Antenna ”  or  “ Air ” For more detailed instructions, please refer to your TV manual. Step 4: In the TV’ s  or  STB ’ s  setup menu, set TV to  “ scan ” for channels. This can sometimes be listed as auto-program,auto-scan,channel search or channel scan. Consult the TV manual or detailed instructions. Step 5: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal postition is found. Adjustment of antenna directions Connect the antenna to TV properly. Set TV to Antenna mode. When the signal quality is low, adjust the location of the antenna or rotate it towards television station. you an watch the clear tv program until the signal quality gets improved. Note: for the best reception, please check the following tips. This digital hdtv antenna is intended for indoor use only. Placing the antenna higher or close to/in a window may result in better reception. You must rescan whenever you move the antenna. Keep the antenna away from any sources of interference: keep the antenna away from those big power consumption devices, such as air conditioner elevator, hairdryer and microwave oven…etc. If you use a flat HDTV, please go through your tv manual to make sure your TV comes With built-in tuner for free view. Make sure you are using a HD receiver; otherwise no HD channels can be picked up. Please read receiver manual. you need to retune your free view TVs and digital receiver form time to time to ensure your are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. TV reception capacity depends on the distance among your hone, transmitting tower and Surrounding environments. For maintenance of the antenna, please use soft cloth with diluent mild detergent to clean its shell. Package List: 1 x Indoor Digital TV Antenna 1 x Universal Connector   Le 15-avr.-19 à 08:00:19 Paris, le vendeur a ajouté les informations suivantes:

  Features: Universal connector, suitable for all countries. Innovative flat, razor-thin antenna design. It has high gain and low error rate digital tv signal reception,and a significant signal enhancement in actual use. Increase the reception of tv programs, and eliminate the pause the mosaic images. Multi-directional design pulls in signals from all directions. Fast and easy to set up -Unwrap,plug it in and Scan channels. You can put it on the wall, on the table or on the window (strongly recommended) and it will make you enjoy watching crystal clear digital &HD shows with many opportunities. Set up guide: Step1: Connect the end of attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box,Plug the USV plug into the USB port of the TV or Digital Converber Box. Step 2: Hand held the antenna, near the window, place it horizontally or vertically Step 3: In the TV’ s or STB ’ s setup menu, set the tuner mode to  “ Antenna ”  or  “ Air ” For more detailed instructions, please refer to your TV manual. Step 4: In the TV’ s  or  STB ’ s  setup menu, set TV to  “ scan ” for channels. This can sometimes be listed as auto-program,auto-scan,channel search or channel scan. Consult the TV manual or detailed instructions. Step 5: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal postition is found. Adjustment of antenna directions Connect the antenna to TV properly. Set TV to Antenna mode. When the signal quality is low, adjust the location of the antenna or rotate it towards television station. you an watch the clear tv program until the signal quality gets improved. Note: for the best reception, please check the following tips. This digital hdtv antenna is intended for indoor use only. Placing the antenna higher or close to/in a window may result in better reception. You must rescan whenever you move the antenna. Keep the antenna away from any sources of interference: keep the antenna away from those big power consumption devices, such as air conditioner elevator, hairdryer and microwave oven…etc. If you use a flat HDTV, please go through your tv manual to make sure your TV comes With built-in tuner for free view. Make sure you are using a HD receiver; otherwise no HD channels can be picked up. Please read receiver manual. you need to retune your free view TVs and digital receiver form time to time to ensure your are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. TV reception capacity depends on the distance among your hone, transmitting tower and Surrounding environments. For maintenance of the antenna, please use soft cloth with diluent mild detergent to clean its shell. Package List: 1 x Indoor Digital TV Antenna 1 x Universal Connector     Le 16-mai-19 à 14:25:16 Paris, le vendeur a ajouté les informations suivantes:

Features: Universal connector, suitable for all countries. Innovative flat, razor-thin antenna design. It has high gain and low error rate digital tv signal reception,and a significant signal enhancement in actual use. Increase the reception of tv programs, and eliminate the pause the mosaic images. Multi-directional design pulls in signals from all directions. Fast and easy to set up -Unwrap,plug it in and Scan channels. You can put it on the wall, on the table or on the window (strongly recommended) and it will make you enjoy watching crystal clear digital &HD shows with many opportunities. Set up guide: Step1: Connect the end of attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box,Plug the USV plug into the USB port of the TV or Digital Converber Box. Step 2: Hand held the antenna, near the window, place it horizontally or vertically Step 3: In the TV’ s or STB ’ s setup menu, set the tuner mode to  “ Antenna ”  or  “ Air ” For more detailed instructions, please refer to your TV manual. Step 4: In the TV’ s  or  STB ’ s  setup menu, set TV to  “ scan ” for channels. This can sometimes be listed as auto-program,auto-scan,channel search or channel scan. Consult the TV manual or detailed instructions. Step 5: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal postition is found. Adjustment of antenna directions Connect the antenna to TV properly. Set TV to Antenna mode. When the signal quality is low, adjust the location of the antenna or rotate it towards television station. you an watch the clear tv program until the signal quality gets improved. Note: for the best reception, please check the following tips. This digital hdtv antenna is intended for indoor use only. Placing the antenna higher or close to/in a window may result in better reception. You must rescan whenever you move the antenna. Keep the antenna away from any sources of interference: keep the antenna away from those big power consumption devices, such as air conditioner elevator, hairdryer and microwave oven…etc. If you use a flat HDTV, please go through your tv manual to make sure your TV comes With built-in tuner for free view. Make sure you are using a HD receiver; otherwise no HD channels can be picked up. Please read receiver manual. you need to retune your free view TVs and digital receiver form time to time to ensure your are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. TV reception capacity depends on the distance among your hone, transmitting tower and Surrounding environments. For maintenance of the antenna, please use soft cloth with diluent mild detergent to clean its shell. Package List: 1 x Indoor Digital TV Antenna 1 x Universal Connector   Le 16-mai-19 à 11:39:31 Paris, le vendeur a ajouté les informations suivantes:

Indoor Digital TV Antenna HDTV Radius Antenna Amplifier 50 Mile DVB-T UHF VHF 6H Features: Universal connector, suitable for all countries. Innovative flat, razor-thin antenna design. It has high gain and low error rate digital tv signal reception,and a significant signal enhancement in actual use. Increase the reception of tv programs, and eliminate the pause the mosaic images. Multi-directional design pulls in signals from all directions. Fast and easy to set up -Unwrap,plug it in and Scan channels. You can put it on the wall, on the table or on the window (strongly recommended) and it will make you enjoy watching crystal clear digital &HD shows with many opportunities. Set up guide: Step1: Connect the end of attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box,Plug the USV plug into the USB port of the TV or Digital Converber Box. Step 2: Hand held the antenna, near the window, place it horizontally or vertically Step 3: In the TV’ s or STB ’ s setup menu, set the tuner mode to  “ Antenna ”  or  “ Air ” For more detailed instructions, please refer to your TV manual. Step 4: In the TV’ s  or  STB ’ s  setup menu, set TV to  “ scan ” for channels. This can sometimes be listed as auto-program,auto-scan,channel search or channel scan. Consult the TV manual or detailed instructions. Step 5: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal postition is found. Adjustment of antenna directions Connect the antenna to TV properly. Set TV to Antenna mode. When the signal quality is low, adjust the location of the antenna or rotate it towards television station. you an watch the clear tv program until the signal quality gets improved. Note: for the best reception, please check the following tips. This digital hdtv antenna is intended for indoor use only. Placing the antenna higher or close to/in a window may result in better reception. You must rescan whenever you move the antenna. Keep the antenna away from any sources of interference: keep the antenna away from those big power consumption devices, such as air conditioner elevator, hairdryer and microwave oven…etc. If you use a flat HDTV, please go through your tv manual to make sure your TV comes With built-in tuner for free view. Make sure you are using a HD receiver; otherwise no HD channels can be picked up. Please read receiver manual. you need to retune your free view TVs and digital receiver form time to time to ensure your are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. TV reception capacity depends on the distance among your hone, transmitting tower and Surrounding environments. For maintenance of the antenna, please use soft cloth with diluent mild detergent to clean its shell. Package List: 1 x Indoor Digital TV Antenna 1 x Universal Connector Le 15-mai-19 à 10:27:03 Paris, le vendeur a ajouté les informations suivantes:

Features: Universal connector, suitable for all countries. Innovative flat, razor-thin antenna design. It has high gain and low error rate digital tv signal reception,and a significant signal enhancement in actual use. Increase the reception of tv programs, and eliminate the pause the mosaic images. Multi-directional design pulls in signals from all directions. Fast and easy to set up -Unwrap,plug it in and Scan channels. You can put it on the wall, on the table or on the window (strongly recommended) and it will make you enjoy watching crystal clear digital &HD shows with many opportunities. Set up guide: Step1: Connect the end of attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box,Plug the USV plug into the USB port of the TV or Digital Converber Box. Step 2: Hand held the antenna, near the window, place it horizontally or vertically Step 3: In the TV’ s or STB ’ s setup menu, set the tuner mode to  “ Antenna ”  or  “ Air ” For more detailed instructions, please refer to your TV manual. Step 4: In the TV’ s  or  STB ’ s  setup menu, set TV to  “ scan ” for channels. This can sometimes be listed as auto-program,auto-scan,channel search or channel scan. Consult the TV manual or detailed instructions. Step 5: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal postition is found. Adjustment of antenna directions Connect the antenna to TV properly. Set TV to Antenna mode. When the signal quality is low, adjust the location of the antenna or rotate it towards television station. you an watch the clear tv program until the signal quality gets improved. Note: for the best reception, please check the following tips. This digital hdtv antenna is intended for indoor use only. Placing the antenna higher or close to/in a window may result in better reception. You must rescan whenever you move the antenna. Keep the antenna away from any sources of interference: keep the antenna away from those big power consumption devices, such as air conditioner elevator, hairdryer and microwave oven…etc. If you use a flat HDTV, please go through your tv manual to make sure your TV comes With built-in tuner for free view. Make sure you are using a HD receiver; otherwise no HD channels can be picked up. Please read receiver manual. you need to retune your free view TVs and digital receiver form time to time to ensure your are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. TV reception capacity depends on the distance among your hone, transmitting tower and Surrounding environments. For maintenance of the antenna, please use soft cloth with diluent mild detergent to clean its shell. Package List: 1 x Indoor Digital TV Antenna 1 x Universal Connector Le 06-juil.-19 à 10:15:12 Paris, le vendeur a ajouté les informations suivantes:

Amplificateur antenne signal HDTV numéric 4K Booster TV RADIUS Antena 480 miles Specification: 1. Working Frequency: VHF(172-240Mhz) / UHF(470-860Mhz) 2. VSWR: ≤1.5 3. Impedence: 75 Ω 4. LNA Gain: 25dB 5. Reception Range: 180 miles（Max） 6. Size:335*235*0.6mm，175g 7. Cable: 1.5C-2V / Black L=4M 8. Connectors: F Male 9. Polarization：Linear 10. Voltage: 5V 11. Power Supply Connector: USB 12. Current Consumption: 20mA 13. Operation Temperature: -45 ~ 85℃ 14. Storage Temperature: -45 ~ 85℃ 15. Compatible with 720p, 1080i, 1080p/ ATSC Set Up Guide Step1: Connect the end of attached coaxial cable to the ANT/IN connector on the back of the TV or Digital Converter Box,Plug the USV plug into the USB port of the TV or Digital Converber Box. Step 2: Hand held the antenna, near the window, place it horizontally or vertically. Step 3: In the TV’ s or STB ’ s setup menu, set the tuner mode to “ Antenna ” or “ Air ” For more detailed instructions, please refer to your TV manual. Step 4: In the TV’ s or STB ’ s setup menu, set TV to “ scan ” for channels. This can sometimes be listed as auto-program,auto-scan,channel search or channel scan. Consult the TV manual or detailed instructions. Step 5: If reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal postition is found. Step 6: Fix the antenna at the optimal position you found. Adjustment of antenna directions Connect the antenna to TV properly. Set TV to Antenna mode. When the signal quality is low, adjust the location of the antenna or rotate it towards television station. You can watch the clear tv program until the signal quality gets improved. Note:for the best reception,please check the following tips This digital hdtv antenna is intended for indoor use only. Placing the antenna higher or close to/in a window may result in better reception. You must rescan whenever you move the antenna. Keep the antenna away from any sources of interference: keep the antenna away from those big power consumption devices, such as air conditioner elevator, hairdryer and microwave oven…etc. If you use a flat HDTV, please go through your tv manual to make sure your TV comes w ith built-in tuner for free view. Make sure you are using a HD receiver; otherwise no HD channels can be picked up. Please read receiver manual. You need to retune your free view TVs and digital receiver form time to time to ensure your are receiving all available services. Retuning takes only a few minutes and can be done with your remote control. TV reception capacity depends on the distance among your hone, transmitting tower and Surrounding environments. For maintenance of the antenna, please use soft cloth with diluent mild detergent to clean its shell. Package Content 1 * Antenna 1 * Amplifier 1 * Converter Plug Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale About US Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Le 14-févr.-19 à 11:03:36 Paris, le vendeur a ajouté les informations suivantes:

Features: As light as a feather, it allows you to place it anywhere without any force. 2. Match your home decor, easily behind pictures, bookshelves or a TV. 3. Quick and easy to open, connect it with the digital chain. You can put it on a wall, desk or window (highly recommended) and it will make you enjoy watching digital crystal hd. There are many possibilities. Configuration guide: Step 1: connect the coaxial cable to the ant/cable to the TV or dvb-ttuner. Step 2: in the TV/configuration menu, set the tuning mode to "antenna" or "air". For more details, see your TVmanual. Atep 3: in the TV/configuration menu, on the "scan" TV of the channel. It can sometimes be categorized as self-programming, self-scanning, search channels, or channel scanning. Please refer to the TV guide for detailed instructions. Step 4: if the reception is sporadic, try moving the antenna to another location and new TV analysis to the best location. Step 5: fix the antenna in the best position you can find. Note: 1. Placing the antenna or near/in the window may result in better reception. Every time you move the antenna, you keep breathing. If you are using an HDTV, please use your TV manual to ensure that your TV is supplied by TNT advanced tuner. 3. Make sure you use recerive HD; Otherwise, you cannot collect hd channels. Read the manual receiver. 4. You'll need to adjust your TNT TV and digital time receiver to make sure you re-tune all available services. The reallocation takes only a few minutes and can be done with your remote control. TV reception depends on the distance between your house, the transmission tower, and your surroundings. Le 04-juil.-19 à 15:07:39 Paris, le vendeur a ajouté les informations suivantes:

Features: As light as a feather, it allows you to place it anywhere without any force. 2. Match your home decor, easily behind pictures, bookshelves or a TV. 3. Quick and easy to open, connect it with the digital chain. You can put it on a wall, desk or window (highly recommended) and it will make you enjoy watching digital crystal hd. There are many possibilities. Configuration guide: Step 1: connect the coaxial cable to the ant/cable to the TV or dvb-ttuner. Step 2: in the TV/configuration menu, set the tuning mode to "antenna" or "air". For more details, see your TVmanual. Atep 3: in the TV/configuration menu, on the "scan" TV of the channel. It can sometimes be categorized as self-programming, self-scanning, search channels, or channel scanning. Please refer to the TV guide for detailed instructions. Step 4: if the reception is sporadic, try moving the antenna to another location and new TV analysis to the best location. Step 5: fix the antenna in the best position you can find. Note: 1. Placing the antenna or near/in the window may result in better reception. Every time you move the antenna, you keep breathing. If you are using an HDTV, please use your TV manual to ensure that your TV is supplied by TNT advanced tuner. 3. Make sure you use recerive HD; Otherwise, you cannot collect hd channels. Read the manual receiver. 4. You'll need to adjust your TNT TV and digital time receiver to make sure you re-tune all available services. The reallocation takes only a few minutes and can be done with your remote control. TV reception depends on the distance between your house, the transmission tower, and your surroundings. Le 03-juil.-19 à 23:22:07 Paris, le vendeur a ajouté les informations suivantes:

Features: As light as a feather, it allows you to place it anywhere without any force. 2. Match your home decor, easily behind pictures, bookshelves or a TV. 3. Quick and easy to open, connect it with the digital chain. You can put it on a wall, desk or window (highly recommended) and it will make you enjoy watching digital crystal hd. There are many possibilities. Configuration guide: Step 1: connect the coaxial cable to the ant/cable to the TV or dvb-ttuner. Step 2: in the TV/configuration menu, set the tuning mode to "antenna" or "air". For more details, see your TVmanual. Atep 3: in the TV/configuration menu, on the "scan" TV of the channel. It can sometimes be categorized as self-programming, self-scanning, search channels, or channel scanning. Please refer to the TV guide for detailed instructions. Step 4: if the reception is sporadic, try moving the antenna to another location and new TV analysis to the best location. Step 5: fix the antenna in the best position you can find. Note: 1. Placing the antenna or near/in the window may result in better reception. Every time you move the antenna, you keep breathing. If you are using an HDTV, please use your TV manual to ensure that your TV is supplied by TNT advanced tuner. 3. Make sure you use recerive HD; Otherwise, you cannot collect hd channels. Read the manual receiver. 4. You'll need to adjust your TNT TV and digital time receiver to make sure you re-tune all available services. The reallocation takes only a few minutes and can be done with your remote control. TV reception depends on the distance between your house, the transmission tower, and your surroundings. Le 03-juil.-19 à 09:47:29 Paris, le vendeur a ajouté les informations suivantes:

Features: As light as a feather, it allows you to place it anywhere without any force. 2. Match your home decor, easily behind pictures, bookshelves or a TV. 3. Quick and easy to open, connect it with the digital chain. You can put it on a wall, desk or window (highly recommended) and it will make you enjoy watching digital crystal hd. There are many possibilities. Configuration guide: Step 1: connect the coaxial cable to the ant/cable to the TV or dvb-ttuner. Step 2: in the TV/configuration menu, set the tuning mode to "antenna" or "air". For more details, see your TVmanual. Atep 3: in the TV/configuration menu, on the "scan" TV of the channel. It can sometimes be categorized as self-programming, self-scanning, search channels, or channel scanning. Please refer to the TV guide for detailed instructions. Step 4: if the reception is sporadic, try moving the antenna to another location and new TV analysis to the best location. Step 5: fix the antenna in the best position you can find. Note: 1. Placing the antenna or near/in the window may result in better reception. Every time you move the antenna, you keep breathing. If you are using an HDTV, please use your TV manual to ensure that your TV is supplied by TNT advanced tuner. 3. Make sure you use recerive HD; Otherwise, you cannot collect hd channels. Read the manual receiver. 4. You'll need to adjust your TNT TV and digital time receiver to make sure you re-tune all available services. The reallocation takes only a few minutes and can be done with your remote control. TV reception depends on the distance between your house, the transmission tower, and your surroundings. Le 13-juil.-19 à 17:55:10 Paris, le vendeur a ajouté les informations suivantes:

Features: As light as a feather, it allows you to place it anywhere without any force. 2. Match your home decor, easily behind pictures, bookshelves or a TV. 3. Quick and easy to open, connect it with the digital chain. You can put it on a wall, desk or window (highly recommended) and it will make you enjoy watching digital crystal hd. There are many possibilities. Configuration guide: Step 1: connect the coaxial cable to the ant/cable to the TV or dvb-ttuner. Step 2: in the TV/configuration menu, set the tuning mode to "antenna" or "air". For more details, see your TVmanual. Atep 3: in the TV/configuration menu, on the "scan" TV of the channel. It can sometimes be categorized as self-programming, self-scanning, search channels, or channel scanning. Please refer to the TV guide for detailed instructions. Step 4: if the reception is sporadic, try moving the antenna to another location and new TV analysis to the best location. Step 5: fix the antenna in the best position you can find. Note: 1. Placing the antenna or near/in the window may result in better reception. Every time you move the antenna, you keep breathing. If you are using an HDTV, please use your TV manual to ensure that your TV is supplied by TNT advanced tuner. 3. Make sure you use recerive HD; Otherwise, you cannot collect hd channels. Read the manual receiver. 4. You'll need to adjust your TNT TV and digital time receiver to make sure you re-tune all available services. The reallocation takes only a few minutes and can be done with your remote control. TV reception depends on the distance between your house, the transmission tower, and your surroundings. Le 09-juil.-19 à 13:45:17 Paris, le vendeur a ajouté les informations suivantes:

Features: As light as a feather, it allows you to place it anywhere without any force. 2. Match your home decor, easily behind pictures, bookshelves or a TV. 3. Quick and easy to open, connect it with the digital chain. You can put it on a wall, desk or window (highly recommended) and it will make you enjoy watching digital crystal hd. There are many possibilities. Configuration guide: Step 1: connect the coaxial cable to the ant/cable to the TV or dvb-ttuner. Step 2: in the TV/configuration menu, set the tuning mode to "antenna" or "air". For more details, see your TVmanual. Atep 3: in the TV/configuration menu, on the "scan" TV of the channel. It can sometimes be categorized as self-programming, self-scanning, search channels, or channel scanning. Please refer to the TV guide for detailed instructions. Step 4: if the reception is sporadic, try moving the antenna to another location and new TV analysis to the best location. Step 5: fix the antenna in the best position you can find. Note: 1. Placing the antenna or near/in the window may result in better reception. Every time you move the antenna, you keep breathing. If you are using an HDTV, please use your TV manual to ensure that your TV is supplied by TNT advanced tuner. 3. Make sure you use recerive HD; Otherwise, you cannot collect hd channels. Read the manual receiver. 4. You'll need to adjust your TNT TV and digital time receiver to make sure you re-tune all available services. The reallocation takes only a few minutes and can be done with your remote control. TV reception depends on the distance between your house, the transmission tower, and your surroundings. Le 08-juil.-19 à 13:48:27 Paris, le vendeur a ajouté les informations suivantes:

Features: As light as a feather, it allows you to place it anywhere without any force. 2. Match your home decor, easily behind pictures, bookshelves or a TV. 3. Quick and easy to open, connect it with the digital chain. You can put it on a wall, desk or window (highly recommended) and it will make you enjoy watching digital crystal hd. There are many possibilities. Configuration guide: Step 1: connect the coaxial cable to the ant/cable to the TV or dvb-ttuner. Step 2: in the TV/configuration menu, set the tuning mode to "antenna" or "air". For more details, see your TVmanual. Atep 3: in the TV/configuration menu, on the "scan" TV of the channel. It can sometimes be categorized as self-programming, self-scanning, search channels, or channel scanning. Please refer to the TV guide for detailed instructions. Step 4: if the reception is sporadic, try moving the antenna to another location and new TV analysis to the best location. Step 5: fix the antenna in the best position you can find. Note: 1. Placing the antenna or near/in the window may result in better reception. Every time you move the antenna, you keep breathing. If you are using an HDTV, please use your TV manual to ensure that your TV is supplied by TNT advanced tuner. 3. Make sure you use recerive HD; Otherwise, you cannot collect hd channels. Read the manual receiver. 4. You'll need to adjust your TNT TV and digital time receiver to make sure you re-tune all available services. The reallocation takes only a few minutes and can be done with your remote control. TV reception depends on the distance between your house, the transmission tower, and your surroundings. Le 07-juil.-19 à 13:12:14 Paris, le vendeur a ajouté les informations suivantes:

  Features: As light as a feather, it allows you to place it anywhere without any force. 2. Match your home decor, easily behind pictures, bookshelves or a TV. 3. Quick and easy to open, connect it with the digital chain. You can put it on a wall, desk or window (highly recommended) and it will make you enjoy watching digital crystal hd. There are many possibilities. Configuration guide: Step 1: connect the coaxial cable to the ant/cable to the TV or dvb-ttuner. Step 2: in the TV/configuration menu, set the tuning mode to "antenna" or "air". For more details, see your TVmanual. Atep 3: in the TV/configuration menu, on the "scan" TV of the channel. It can sometimes be categorized as self-programming, self-scanning, search channels, or channel scanning. Please refer to the TV guide for detailed instructions. Step 4: if the reception is sporadic, try moving the antenna to another location and new TV analysis to the best location. Step 5: fix the antenna in the best position you can find. Note: 1. Placing the antenna or near/in the window may result in better reception. Every time you move the antenna, you keep breathing. If you are using an HDTV, please use your TV manual to ensure that your TV is supplied by TNT advanced tuner. 3. Make sure you use recerive HD; Otherwise, you cannot collect hd channels. Read the manual receiver. 4. You'll need to adjust your TNT TV and digital time receiver to make sure you re-tune all available services. The reallocation takes only a few minutes and can be done with your remote control. TV reception depends on the distance between your house, the transmission tower, and your surroundings.     Le 06-juil.-19 à 17:07:22 Paris, le vendeur a ajouté les informations suivantes:

Features: As light as a feather, it allows you to place it anywhere without any force. 2. Match your home decor, easily behind pictures, bookshelves or a TV. 3. Quick and easy to open, connect it with the digital chain. You can put it on a wall, desk or window (highly recommended) and it will make you enjoy watching digital crystal hd. There are many possibilities. Configuration guide: Step 1: connect the coaxial cable to the ant/cable to the TV or dvb-ttuner. Step 2: in the TV/configuration menu, set the tuning mode to "antenna" or "air". For more details, see your TVmanual. Atep 3: in the TV/configuration menu, on the "scan" TV of the channel. It can sometimes be categorized as self-programming, self-scanning, search channels, or channel scanning. Please refer to the TV guide for detailed instructions. Step 4: if the reception is sporadic, try moving the antenna to another location and new TV analysis to the best location. Step 5: fix the antenna in the best position you can find. Note: 1. Placing the antenna or near/in the window may result in better reception. Every time you move the antenna, you keep breathing. If you are using an HDTV, please use your TV manual to ensure that your TV is supplied by TNT advanced tuner. 3. Make sure you use recerive HD; Otherwise, you cannot collect hd channels. Read the manual receiver. 4. You'll need to adjust your TNT TV and digital time receiver to make sure you re-tune all available services. The reallocation takes only a few minutes and can be done with your remote control. TV reception depends on the distance between your house, the transmission tower, and your surroundings. Le 06-juil.-19 à 16:40:16 Paris, le vendeur a ajouté les informations suivantes:

  Features: As light as a feather, it allows you to place it anywhere without any force. 2. Match your home decor, easily behind pictures, bookshelves or a TV. 3. Quick and easy to open, connect it with the digital chain. You can put it on a wall, desk or window (highly recommended) and it will make you enjoy watching digital crystal hd. There are many possibilities. Configuration guide: Step 1: connect the coaxial cable to the ant/cable to the TV or dvb-ttuner. Step 2: in the TV/configuration menu, set the tuning mode to "antenna" or "air". For more details, see your TVmanual. Atep 3: in the TV/configuration menu, on the "scan" TV of the channel. It can sometimes be categorized as self-programming, self-scanning, search channels, or channel scanning. Please refer to the TV guide for detailed instructions. Step 4: if the reception is sporadic, try moving the antenna to another location and new TV analysis to the best location. Step 5: fix the antenna in the best position you can find. Note: 1. Placing the antenna or near/in the window may result in better reception. Every time you move the antenna, you keep breathing. If you are using an HDTV, please use your TV manual to ensure that your TV is supplied by TNT advanced tuner. 3. Make sure you use recerive HD; Otherwise, you cannot collect hd channels. Read the manual receiver. 4. You'll need to adjust your TNT TV and digital time receiver to make sure you re-tune all available services. The reallocation takes only a few minutes and can be done with your remote control. TV reception depends on the distance between your house, the transmission tower, and your surroundings.     Le 26-juil.-19 à 11:45:31 Paris, le vendeur a ajouté les informations suivantes:

Product Description:  This magnetic base HDTV antenna helps you get stronger- HDTV signal to watch more HD TV programs and videos. The high gain 25dBi antenna gives you a stronger- signal with high sensitivity to receive programs of better quality. And built-in high frequency ensures the stability and smoothness of signal, thus providing you with a more brilliant watching TV enjoyment.   Product Features:  Adopting high gain 25dBi antenna to boost signals for HDTV. Made of high quality metal, signal transmission is faster and more stable. 360 degree no dead angle receiving signal, more convenient to use. High frequency of VHF(172-240Mhz)/ UHF(470-860Mhz) with high sensitivity plus high gain 25dBi ensure the stability and smoothness of signal transmission. Give you a great watching TV enjoyment. This antenna receives multiple kinds of signals, including ATSC, DVB-T, DVB-T2, ISDB. It is compatible with 720P, 1080i, 1080P/ ATSC. Enabling you to enjoy HD videos. This high gain antenna widens the signal receiving/ transmitting range to 200 miles, which allows you to get more signals, thus more HD TV programs. This magnetic base TV signal amplifier antenna supports plug and play. No need for drive or software.   How to Use:  Step 1: connect the end(f-male) of attached coaxial cable to the ANT/IN connector on the back of the TV or DVB-T tuner. Step 2: In the TV's setup menu, set the tuner mode to "Antenna" or "Air". for more detailed instructions, please refer to your TV manual. Step 3: In the Tv's setup menu, set TV to "scan" for channels. this can sometimes be listed as auto-program, auto-scan, channel search or channel scan. consult the TV manual for detailed instructions. Step 4: if reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal position is found. Step 5: fix the antenna at the optimal position you found.   Note:  1. Placing the antenna higher or close to/in a window may result in better reception. you must rescan whenever you move the antenna. 2. If you use a flat HDTV, please go through your TV manual to make sure your TV comes with built-in tuner for freeview. 3. You need to retune your freeview TVs and digital receiver from time to ensure you are reserving all available services. retuning takes only a few minutes and can be done with your remote control. 4.TV reception capacity depends on the distance among your home, transmitting tower and surrounding environments.   Product Specification:  Type DVB-T2 Antenna Material Metal Working frequency VHF(172-240Mhz)/ UHF(470-860Mhz) Impedance 75Ω LNA-high gain 25dBi Signal range 200 miles Receiving signal ATSC, DVB-T, DVB-T2, ISDB Compatibility 720P, 1080i, 1080P/ ATSC Cable length approx. 4.5 meters/ 14.77ft Connector F male Voltage 5V Power consumption 20mA Working temperature -45-85℃ Storage temperature -45-85℃ Dimension 2.44x5.12inch(62x130mm) Net Weight 7.6oz(216g)   Package Includes:  1 x 200-mile Antenna