Only lcd

ONLY LCD dalle screen SURFACE PRO 5 1796 1798 M1004998-032 Original, Garantie 6 mois Grade B, Like New, comme neuf Prestalia e-commerce solutions.

Accessoire Périphériques Code EAN: 8111700645520 Rubrique principale Périphériques: Accessoire En-tête / Fabricant: Nipseyteko Origine_import: hightech_minimaliste Titre: Only LCD Écran LCD LED de remplacement, 12.3 pouces, 1280x480, avec M.NT68676, HDMI + DVI + VGA, original Divers / Type de produit: Pièces détachées

Accessoire Périphériques Code EAN: 8111700645551 Rubrique principale Périphériques: Accessoire En-tête / Fabricant: Nipseyteko Origine_import: hightech_minimaliste Titre: Only LCD Moniteur Original de carte de contrôle de LTA149B780F M.NT68676 HDMI + DVI + VGA avec le remplacement de écran LED d'affichage à cristaux liquides de 14.9 pouces 1280*390 Divers / Type de produit: Pièces détachées

LCD dalle écran screen only Ipad Pro 2017 A1701 A1709 10.5inch digitizer not included Original, Garantie 12 mois Prestalia e-commerce solutions.

LCD dalle screen LENOVO MIIX 320 10ICR KD101N56-40NI-B3 80xf (LCD only) Original, Garantie 6 mois Grade B, Like New, comme neuf Prestalia e-commerce solutions.

LCD dalle écran screen LENOVO MIIX 320 10ICR KD101N56-40NI-B3 80xf (LCD only) Original, Garantie 6 mois Grade B, Like New, comme neuf Prestalia e-commerce solutions.

Spy, the monitor image is not visible, only a white screen. To see the image you need to wear glasses with polarizing lenses. The polarizing film is attached. Diagonal 23 inches, resolution 1920x1080 (Full HD)The DVI cord and power cord included. Glasses are not included. Just the tape.

Spy, the monitor image is not visible, only a white screen. To see the image you need to wear glasses with polarizing lenses. The polarizing film is attached. Diagonal 23 inches, resolution 1920x1080 (Full HD) Glasses are not included. Just the tape. Pickup is available metro Monceau

La tablette fonctionne, mais le lcd est tombé en panne voir photo, tout le reste fonctionne mais vu que le lcd est HS je le vend pour pièce, aucun retour possible. vendu sans chargeur, il vous sera envoyé avec la coque arrière décolé. Working, only lcd doesnt work see on photo. sold for parts, no return accepted, sold without charger, will be delivered with back cover already opened unsticked.

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 02-avr.-19 à 09:52:29 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 05-sept.-19 à 22:14:30 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 04-sept.-19 à 18:24:09 Paris, le vendeur a ajouté les informations suivantes:

Store category Sign Up Now ! You may also like EYOYO 15 inch IPS LCD HD Monitor 1920x1080 HDMI/VGA/BNC Video For CCTV DVR Bank Product Description Product Description     The EYOYO 15.6" IPS display with 1920x1080 high resolution,500cd/m2 brightness,800:1 contrast ratio,shows every detail clearly and vivid without color difference from any viewing angle. It also supports VGA,BNC,USB,AV & HD inputs so you can easily power and extend the enjoyment from your video devices on Full HD display. Clear Image & Colorful Display: 15.6-inch 1920x1080 high resolution TFT LCD monitor. 178°Wide viewing Angle: It provides for people viewing from different angles with the Same clarity visual experience. High Brightness: 500 CD/m2 high bright LED screen and 16:9 aspect ratio. Ports: HD,AV,VGA,BNC,USB help you stay connected. Multi Application: Use as a monitor for CCTV system, rear view camera, PC monitor or indoor security. 15.6 inch HD LCD monitor Brand: Eyoyo Panel Type: LCD IPS Monitor Color: Black Screen Size: 15.6 inch Screen Resolution: 1920 * 1080 Contrast: 800:1 Screen Ratio: 16:9 Brightness: 500 CD/m2 Visual Angle: The Angle of view Display Area: 343 * 192 mm Refresh Rate: 60-75 hz Signal Input: HD/AV/VGA/BNC/USB Language: Chinese English German, French, Russian optional languages such as Italian, Spanish, Arabic, farsi Power Supply: DC,12V Format: PAL NTSC Package: 1 x 15.6 Inch Monitor 1 x Charge Cable 1 x Remote Controller 1 x HD Cable 1 x BNC Cable 1 x VGA Cable 1 x Power Adapter 1 x Wall Hanging Bracket 1 x Manual       Payment Delivery details Return About us Contact us Payment ● We accept Payment via PayPal only. ● If you do not have a PayPal Account you can still pay with your Credit / Debit Card, but this will be through PayPal ONLY. VAT and TAX is not included, please not. Delivery details ● Will ship order within 1 working days after get your payment. We do NOT accept any Email/Message note before or after you place orders. ● If item price is over $15, we'll ship with tracking number. Or it depends(except US). ● Shipping to US,AU,UK and CA takes about 7-15 working days for delivery normally. Standard shipping to other countries is about 7-25 working days. If remote countries, like Peru, Chile,Brazil and so on, it takes about 25-45 working days for delivery normally.Economy shipping takes about 10 working days more than standard shipping. ● shipping is out of control. Sometime shipping may take longer time. Hope you can wait some more days. If item did not arrive before Estimated date, pls contact us. We can refund or resend first, don't worry. Don't leave a negative feedback before contact us. Thank you very much. Return ● We understand that not every purchase is a good one for every custome Please note that we only accept returns within 30 days after delivery. ● If the item is defective/DOA (Dead on Arrival) we must be notified within 2 days of arrival, and a refund in full will be granted after item is sent back. ● Returns after 30 days will not be accepted. ● Please allow up to 3 business days for your item to be inspected and your return to be be processed. About us ● We will make every effort to make your shopping the most pleasant and wonderful! Any question feel free to contact us! ● Please do not leave negative and neutral rating, if you have any questions, please contact us. We will do best to solve it. Contact us ● We'll reply your message within 24 hours on working day because of jet lag. If Weekends or holidays, we'll reply within 48 hours. Will do best to solve problem. Please trust us.   Payment Delivery details Terms of sales About us Contact us Payment We accept payment via Paypal only. Payment must be made within 8 days, Non-payment may result in an UPI (Unpaid Item) Delivery details (1).Item are posted from China local by regular mail in 1 working day normally, (2).Items are posted to the buyer's Paypal address, so please check details before making payment. (3).Delivery usually takes about 10-20business days. However, please keep in mind that times there may be an unusual delay in delivery by your local post office or customs strict inspection, which are out of control 4).Please contact us if you are not receiving the item after the expected schedule and we will investigate it. 5). We are not responsible for any customs duty or import tax Terms of sales (1). 12mouths MANUFACTURER's Warranty for the defective items.(excluding items damaged and/or misused after receipt) (2).Please contact our customer services with message before the item return. About us (1).We really hope buyer contact us by choosing message topic “I have a question about using my item or I want to send the seller a message” before leaving neutral or negative feedback, opening case or request,asking problem about shipping etc Contact us (2).We feel well to hear message from you, do no hesitate to contact us and we will answer you within 24 hours (weekend excluded). Office Hour: Mon- Fri 9:30AM-6:00PM(GMT+8), Le 18-oct.-18 à 18:05:47 Paris, le vendeur a ajouté les informations suivantes:

Ecran dalle LCD LED LTN156AT05 Pour ordinateur Portable 15,6"  PENSER A BIEN VÉRIFIER LA TAILLE DU CONNECTEUR (voir Photo 7) Bon état Général,  Grade A Quelques légères traces superficielles  (2 & 3) AUTRES REFERENCES COMPATIBLES: - LTN156AT03 - LTN156AT02 - LTN156AT05 - LTN156AT15-B - LTN156AT17 - LTN156AT09-B - LTN156AT23 - LTN156AT24 - LP156WH2-TLA1 - LP156WH2-TLB1 - LP156WH2-TLE1 - LP156WH2-TLQ1 - LP156WH2-TLQB - LP156WH2-TLR1 - LP156WH4-TLC1 - LP156WH4-TLA1 - LP156WH4 - B156XW02 V.0 - B156XW02 V.6 - B156XW02 V.2 - B156XW02 V.3 - B156XTN02.1 - B156XTN02.2 - CLAA156WA11A - CLAA156WB11A - CLAA156WA11S - BT156GW02 V.0 - BT156GW01 V.3 - BT156GW01 V.6 - BT156GW01 V.2 - BT156GW01 V.4 - N156B6-L0B - N156B6-L0A - N156B6-L06 - N156B6-L04 - N156B6-L0D - N156BGE-L21 - HB156WX1-100 ACER: Extensa 5235, Extensa 5635, eMachines E430, eMachines E525, eMachines E528, eMachines E728, eMachines E729Z, eMachines E730 ASUS: G53, G73, K50, K51, K52, K53, K54, N51, P50IJ, P52, P55VA, X5, X52, X53, X54, X55 HP: 610, 615, 620, 625, ProBook 4115S, ProBook 4515S, Probook 4510S, Probook 4520S, Probook 4525S, Probook 4545S LENOVO: Thinkpad Edge E520 MSI: Megabook CR640 (MS-16Y1), X-slim X600 SAMSUNG: NP-R525, NP-R530, NP-R540, NP-RV510, NP-RV511, NP-RV610, NP300E5C SONY: VPC-EB1E1E Aspire: Aspire 5235, Aspire 5335, Aspire 5336, Aspire 5349 5749, Aspire 5532, Aspire 5536, Aspire 5542, Aspire 5551, Aspire 5552, Aspire 5560, Aspire 5735, Aspire 5736Z, Aspire 5738, Aspire 5739, Aspire 5740, Aspire 5741, Aspire 5742, Aspire 5942G, Aspire E1-571, Aspire E5-531, aspire 5253 Dalles LCD: Ecran 15,6" 40 pin Easynote: EasyNote TJ65 (MS2273), EasyNote TJ75, EasyNote TM94, EasyNote TS11HR, EasyNote TS11SB, Easynote TE11BZ, Easynote TE11HC, Easynote TH36, Easynote TJ62 (MS2274), Easynote TJ66, Easynote TJ71, Easynote TJ72, Easynote TJ73, Easynote TK36, Easynote TK81 (PEW96), Easynote TK85 (PEW91), Easynote TK87 (PEW91), Easynote TM81, Easynote TM83, Easynote TM85, Easynote TM86, Easynote TM98, Easynote TR81, Easynote TR85, Easynote TR87, Easynote TS13HR, Easynote TS13SB, Easynote TS44HR, Easynote TS44SB(P5WS0) Envy: Envy 15-1XXX Essential Series: Lenovo B560, Lenovo G505, Lenovo G550 (2958), Lenovo G580 Inspiron: Inspiron 1545, Inspiron 15R (N5010), Inspiron M5010, Inspiron M5040, Inspiron N5030, Inspiron N5040, Inspiron N5050 Lifebook: Lifebook AH531 Pavilion: Pavilion DV6-1XXX, Pavilion DV6-2XXX, Pavilion DV6-3XXX, Pavilion DV6-6XXX, Pavilion G6, Pavilion G62 Presario: Presario CQ56, Presario CQ57, Presario CQ58, Presario CQ61, Presario CQ62 Satellite: Satellite C50D-A, Satellite C50D-B, Satellite C55-A, Satellite C55D-A, Satellite C650, Satellite C660 / C660D, Satellite C850, Satellite C855, Satellite L505, Satellite L650, Satellite L655, Satellite P750 Studio: Studio 1555, Studio XPS 1647 Thinkpad: Thinkpad L530, Thinkpad W530 Travelmate: Travelmate 5735, Travelmate 5742, Travelmate 5744, Travelmate 5760 Vostro: Vostro 1015 ????  INFORMATIONS  ???? • Les pièces Vendues sont testées avant d'être mises en vente. Nous testons chaque pièce minutieusement afin de vérifier l’état précis du composant et nous ne vendons que des Composants Originaux. • Si vous rencontrez des problèmes avec un Composant vendu, veuillez  nous contacter pour obtenir une aide Rapide. • Si un Composant vendu présente des défauts, Tout sera décrit dans la description de l’annonce. ????  PAIEMENT  ???? Vous Trouvez meilleur prix?  (FRANCE uniquement) – Contactez Nous Pour Obtenir une Meilleure Offre ! Paiement via Paypal Uniquement, Paypal permet aux clients de payer en toutes sécurité et avec  des Garanties Solides. ????   ENVOI   ???? Vos commandes sont expédiées Rapidement Sous 24 à 48H (jours ouvrables) Expedition à l’international Sauf mention contraire. L'expédition international peut ajouter du temps de transit…  Nous vous remercions d'avance pour votre patience.    RETOURS  Merci de Nous contacter avant d’ouvrir une procédure de retour, il y a toujours une solution rapide et équitable…  ENGLISH DESCRIPTION...   LCD SCREEN 15,6" For Laptop LTN156AT05 REMEMBER TO CHECK THE SIZE OF THE CONNECTOR (see Picture 7) Good Condition, Some slight surface traces (See Pictures 2 & 3) ❓  INFORMATIONS  ❓ •  Sold parts are tested before being put on sale. We test each piece carefully    to check the exact state of the component and we only sell Original Components • If you have problems with a Component, please contact us for quick help • If a sold component has Faulty or defects, everything will be described in the description of the ad. ????  PAYMENT  ???? You Find a best price ? (FRANCE only) - Contact Us To Get A Better Offer! Payment via Paypal Only, Paypal allows customers to pay in all security and with  Solid Warranties…  ????   SHIPPING   ???? Your orders are shipped quickly Within 24 to 48 hours (business days) • International Expedition Unless otherwise specified. • International shipping can add transit time... we thank you in advance for your patience.  RETURNS  Please contact us before opening a return procedure, there is always a quick and equitable solution...                                                                                Thank you For Reading

Ecran dalle LCD LED LTN156AT05 Pour ordinateur Portable 15,6"  PENSER A BIEN VÉRIFIER LA TAILLE DU CONNECTEUR (voir Photo 7) Bon état Général,  Grade A Quelques légères traces superficielles (2 & 3) AUTRES REFERENCES COMPATIBLES: - LTN156AT03 - LTN156AT02 - LTN156AT05 - LTN156AT15-B - LTN156AT17 - LTN156AT09-B - LTN156AT23 - LTN156AT24 - LP156WH2-TLA1 - LP156WH2-TLB1 - LP156WH2-TLE1 - LP156WH2-TLQ1 - LP156WH2-TLQB - LP156WH2-TLR1 - LP156WH4-TLC1 - LP156WH4-TLA1 - LP156WH4 - B156XW02 V.0 - B156XW02 V.6 - B156XW02 V.2 - B156XW02 V.3 - B156XTN02.1 - B156XTN02.2 - CLAA156WA11A - CLAA156WB11A - CLAA156WA11S - BT156GW02 V.0 - BT156GW01 V.3 - BT156GW01 V.6 - BT156GW01 V.2 - BT156GW01 V.4 - N156B6-L0B - N156B6-L0A - N156B6-L06 - N156B6-L04 - N156B6-L0D - N156BGE-L21 - HB156WX1-100 ACER: Extensa 5235, Extensa 5635, eMachines E430, eMachines E525, eMachines E528, eMachines E728, eMachines E729Z, eMachines E730 ASUS: G53, G73, K50, K51, K52, K53, K54, N51, P50IJ, P52, P55VA, X5, X52, X53, X54, X55 HP: 610, 615, 620, 625, ProBook 4115S, ProBook 4515S, Probook 4510S, Probook 4520S, Probook 4525S, Probook 4545S LENOVO: Thinkpad Edge E520 MSI: Megabook CR640 (MS-16Y1), X-slim X600 SAMSUNG: NP-R525, NP-R530, NP-R540, NP-RV510, NP-RV511, NP-RV610, NP300E5C SONY: VPC-EB1E1E Aspire: Aspire 5235, Aspire 5335, Aspire 5336, Aspire 5349 5749, Aspire 5532, Aspire 5536, Aspire 5542, Aspire 5551, Aspire 5552, Aspire 5560, Aspire 5735, Aspire 5736Z, Aspire 5738, Aspire 5739, Aspire 5740, Aspire 5741, Aspire 5742, Aspire 5942G, Aspire E1-571, Aspire E5-531, aspire 5253 Dalles LCD: Ecran 15,6" 40 pin Easynote: EasyNote TJ65 (MS2273), EasyNote TJ75, EasyNote TM94, EasyNote TS11HR, EasyNote TS11SB, Easynote TE11BZ, Easynote TE11HC, Easynote TH36, Easynote TJ62 (MS2274), Easynote TJ66, Easynote TJ71, Easynote TJ72, Easynote TJ73, Easynote TK36, Easynote TK81 (PEW96), Easynote TK85 (PEW91), Easynote TK87 (PEW91), Easynote TM81, Easynote TM83, Easynote TM85, Easynote TM86, Easynote TM98, Easynote TR81, Easynote TR85, Easynote TR87, Easynote TS13HR, Easynote TS13SB, Easynote TS44HR, Easynote TS44SB(P5WS0) Envy: Envy 15-1XXX Essential Series: Lenovo B560, Lenovo G505, Lenovo G550 (2958), Lenovo G580 Inspiron: Inspiron 1545, Inspiron 15R (N5010), Inspiron M5010, Inspiron M5040, Inspiron N5030, Inspiron N5040, Inspiron N5050 Lifebook: Lifebook AH531 Pavilion: Pavilion DV6-1XXX, Pavilion DV6-2XXX, Pavilion DV6-3XXX, Pavilion DV6-6XXX, Pavilion G6, Pavilion G62 Presario: Presario CQ56, Presario CQ57, Presario CQ58, Presario CQ61, Presario CQ62 Satellite: Satellite C50D-A, Satellite C50D-B, Satellite C55-A, Satellite C55D-A, Satellite C650, Satellite C660 / C660D, Satellite C850, Satellite C855, Satellite L505, Satellite L650, Satellite L655, Satellite P750 Studio: Studio 1555, Studio XPS 1647 Thinkpad: Thinkpad L530, Thinkpad W530 Travelmate: Travelmate 5735, Travelmate 5742, Travelmate 5744, Travelmate 5760 Vostro: Vostro 1015  INFORMATIONS  • Les pièces Vendues sont testées avant d'être mises en vente. Nous testons chaque pièce minutieusement afin de vérifier l’état précis du composant et nous ne vendons que des Composants Originaux. • Si vous rencontrez des problèmes avec un Composant vendu, veuillez  nous contacter pour obtenir une aide Rapide. • Si un Composant vendu présente des défauts, Tout sera décrit dans la description de l’annonce.  PAIEMENT  - Vous Trouvez meilleur prix?  (FRANCE uniquement) – Contactez Nous Pour Obtenir une Meilleure Offre ! - Paiement via Paypal Uniquement, Paypal permet aux clients de payer en toutes sécurité et avec des Garanties Solides.   ENVOI   - Vos commandes sont expédiées Rapidement Sous 24 à 48H (jours ouvrables) - Expedition à l’international Sauf mention contraire. - L'expédition international peut ajouter du temps de transit… Nous vous remercions d'avance pour votre patience.   - Merci de Nous contacter avant d’ouvrir une procédure de retour, il y a toujours une solution rapide et équitable…  ENGLISH DESCRIPTION...   LCD SCREEN 15,6" For Laptop LTN156AT05 REMEMBER TO CHECK THE SIZE OF THE CONNECTOR (see Picture 7) Good Condition, Some slight surface traces (See Pictures 2 & 3) ❓ INFORMATIONS ❓ • Sold parts are tested before being put on sale. We test each piece carefully    to check the exact state of the component and we only sell Original Components • If you have problems with a Component, please contact us for quick help • If a sold component has Faulty or defects, everything will be described in the description of the ad.  PAYMENT  - You Find a best price ? (FRANCE only) - Contact Us To Get A Better Offer! - Payment via Paypal Only, Paypal allows customers to pay in all security and with Solid Warranties…    SHIPPING   - Your orders are shipped quickly Within 24 to 48 hours (business days) - • International Expedition Unless otherwise specified. - • International shipping can add transit time... - we thank you in advance for your patience. - Please contact us before opening a return procedure, - there is always a quick and equitable solution...                                                                               Thank you For Reading

540mm LED Backlight Strip Kit For 24" inch Update CCFL LCD Screen To MonitWFFR Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 22-août-19 à 10:39:35 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Le 24-déc.-18 à 13:37:18 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 02-avr.-19 à 12:08:11 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 01-avr.-19 à 13:08:56 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 09-mai-19 à 05:43:10 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-mai-19 à 09:56:09 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-mai-19 à 07:54:08 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 06-juin-19 à 13:31:05 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 08-juil.-19 à 08:14:13 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Le 20-juil.-19 à 16:13:15 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 17-juil.-19 à 09:19:16 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable     Le 13-juil.-19 à 04:59:04 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 19-août-19 à 13:43:11 Paris, le vendeur a ajouté les informations suivantes:

  Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable -Nous acceptons seulement le paiement Paypal. - acheteurs   internationaux - veuillez   noter: a) les taxes et frais d'importation ne sont pas inclus dans le prix de l'article ou les frais d'expédition.  Ces   charges   sont   la   responsabilité   de   l' acheteur. b) Veuillez vérifier auprès du Bureau de douane de votre pays pour déterminer ce que ces coûts supplémentaires seront avant d'enchérir/acheter. * Nous ne pouvons pas expédier aux cases postales ou aux adresses d'APO/FPO Merci!     Le 23-août-19 à 18:22:31 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 03-sept.-19 à 19:13:32 Paris, le vendeur a ajouté les informations suivantes: