Outputs line outputs

Je vends ce préampli convertisseur Vintage studer. Excellent état. Sort de révision, lampes neuves appairées et réglées a la perfection. Un son incomparable. The  MicVALVE  is a two-channel preamplifier for microphone and line level signals with analog and digital outputs. The main signal path is designed in semiconductor technology and allows top quality “direct-to-digital” recordings. A Valve Dignifier stage equipped with  2 × ECC 81  valves per channel can be switched into the signal path, providing a number of front panel controls for individual valve sound treatment. -         Maintained by professional technician in France with invoice  -         new valves -         Smoke free environment.

High quality amp and preamp set in very good condition. Powerful and warm sound, typical of oldschool Luxman. Sold with the original remote control. 1000-P Preamp Frequency Range: 10 Hz - 100 kHz (-3 dB) Total Distortion: 0.01% (1 kHz, 0 dB) Signal-to-Noise Ratio: 100 dB (A-weighted, 1 kHz) Inputs: Multiple inputs, including line and phono inputs Outputs: Line outputs (fixed and variable), tape output Phono Input: MM and MC Controls: Volume, balance, tone controls, and adjustment knobs for phono settings Dimensions: W 44.5 x H 12.2 x D 38.2 cm Weight: Approx. 7 kg 1000-M Amp Power: 100 W per channel (8 ohms), 200 W per channel (4 ohms) Total distortion: 0.01% (1 kHz, 100 W) Signal-to-noise ratio: 120 dB Inputs: Line-in Outputs: Speaker outputs (bi-wiring possible) Dimensions: L 44.5 x H 16 x D 39.5 cm Weight: approx. 13 kg En savoir plus Collaboration commerciale.

Egaliseur Hitachi HGE-G2 2 x 10 fréquences de 31.5Hz à une fréquence à choisir parmi 12kHz, 16kHz ou 20kHz.  Entrées et sorties Line et Tape. Plage de réglage -10dB à +10dB. Très bon fonctionnement. Indicateur à LED sur chaque curseur. Fourni avec son mode d'emploi. Equalizer Hitachi HGE-G2 2 x 10 frequencies from  31.5Hz to a frequency to be selected among 12kHz, 16kHz or 20kHz. Inputs and outputs Line and Tape. Level range from -10dB to +10dB. Works very well. LED light on each slider. Supplied with its user manual.

VP-5040 Specifications System: Video recording system: Rotary two-head helical scan system Luminance: FM recording Colour Signal: Converted subcarrier direct recording Video signal system: CCIR standards PAL or SECAM colour system EIA standard NTSC 4.43 Video: Output: BNC type: 1.0Vp-p +- 0,2V, 75 ohms, unbalanced sync negative TV output: 8-pin x1 Horizontal resolution: 250 lines Signal-to-noise ratio: Better than 45dB Audio: Outputs: LINE: Phonojack CH1/2 -5dBm (47k ohm load), unbalanced TV: 8-pin x1 Signal-to-noise ratio: Better than 48 (at 3% distortion level) Distortion: Less than 2% Frequency response: 50Hz to 15kHz Special Functions: Pause A still picture is obtained, with automatic long pause function Search Approximately 5 times of normal speed in forward and reverse directions Remote Control: Possible with optional wired remote control. RF Output: Possible with optional RFK-660UB adaptor Tape transport: Tape speed: 9,53 cm/sec Playback time: 60 min (with Sony KSP-60 U-matic videocassettes) Fast forward time: Less than 4 min (with Sorry KSP-60 U-matic videocassettes) Rewind time: Less than 4 min (with Sorry KSP-60 U-matic videocassettes) Useable tapes: BRS,XBR,KSP type tape. General: Power requirements: AC 220 / 24OV, +- 10%, 50/60Hz +- 10% Power consumption: 53W Operating temperature: 5C to 40C (41F to 104F) Dimensions: Approx. 424(W) x 193(H) x 489(D) mm Weight: Approx. 16 kg (35 lb 4 Oz) Supplied accessories: AC cord, Operation manual

Tascam Portastudio 414 in very good esthetic condition and fully functional. A few minor marks and scratches on the cassette deck case.  Faders, knobs, tapehead and cassette deck cleaned and demagnetized with professional equipment. Sold with its original power supply and manual. - 8 inputs: 4 mono + 2 stéréo + 2 SUB IN - Outputs:  LINE OUT, MONITOR OUT, SYNC OUT - 2  AUX SEND FX OUT + section EQ (LOW + HIGH) - Pitch control +-12% — #tascam #portastudio #multi-track #recorder #cassette tapes #table mixage, #analog #fostex x-18 #fostex x-28 #tascam 414 #tascam 464 #portastudio #yamaha MT4X #yamaha MT8X

Lector CD Sony CDP-M19. Un gran lector, con una calidad excelente. Se incluye manual de instrucciones original. Medidas: 35,5x30x9 cms. Peso: 2,8 kgs. Especificaciones: Frequency response 2 Hz-20 kHz +1dB,-1.2dB Signal to noise ratio More than 93 dB Dynamic range More than 90 dB Harmonic distortion Less than 0.05% Channel separation More than 90 dB Outputs Line Out (phono jacks) Output level 2 V (at 50 k) Load impedance over 10 k Headphones (stereo phone jack) Output level max. 10 mW Load impedance 32.

Focusrite Saffire Pro 14, Interface audionumérique FireWire - jamais utilisé.  CD d'installation fournie. 1 x câble Firewire -> Firewire fourni. Fiche technique   Fabricant:Focusrite Modèle:Saffire Pro 14 Série:Saffire Catégorie:Interfaces audionumériques FireWire Fiche créée le:11/08/2010 Microphone Inputs 1-2 Frequency Response: 20Hz - 20kHz +/- 0.2 dB Gain Range: +13dB to +60dB Maximum Headroom +8dBu THD+N: 0.001% (measured at 1kHz with a 20Hz/22kHz bandpass filter) Noise EIN: 124dB analogue to digital (measured at 60dB of gain with 150 Ohm termination (20Hz/22kHz bandpass filter) Input Impedance: 2k Ohm Line Inputs (Inputs 1-2) Frequency Response: 20Hz - 20kHz +/- 0.2dB Gain Range: -10dB to +36dB THD+N: 0.001% (measured with 0dBFS input and 22Hz/22kHz bandpass filter) Noise: -90dBu (22Hz/22kHz bandpass filter) Input Impedance: >10k Ohm Line Inputs 3-4 Frequency Response: 20Hz - 20kHz +/- 0.2 dB Gain Range: Switch-able between +16dBu or -10dBV for 0dBFS (balanced inputs) THD+N: 0.003% (measured at 1kHz with a 20Hz/22kHz bandpass filter) Noise: -100dBu (22Hz/22kHz bandpass filter) Input Impedance: >10k Ohm Instrument Inputs (Inputs 1 and 2) Frequency Response: 20Hz - 20kHz +/- 0.1dB Gain Range: +13dB to +60dB THD+N: 0.004% (measured with 0dBu input and 20Hz/22kHz bandpass filter) Noise: -87dBu (20Hz/22kHz bandpass filter) Analogue Audio Outputs (Outputs 1-4) 4 Electronically Balanced Outputs Maximum Output Level (0dBFS): +10dBu THD+N: 0.001% (0dBFS input, 20Hz/22kHz bandpass filter) Crosstalk (Channel Isolation) Any input to input: > 100dB Any output to output: > 100dB Any input to output: > 100dB DIGITAL PERFORMANCE A/D Dynamic Range > 109dB (A-weighted), all analogue inputs D/A Dynamic Range > 106dB (A-weighted), all analogue outputs Clock Sources: - Internal Clock - Sync to Word Clock on SPDIF Input (RCA) JetPLLTM PLL technology providing superb jitter reduction for class leading converter performance Clock jitter < 250 picoseconds Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz 8 input channels to computer: Analogue (4), SPDIF (2) and Loop-back (2) 6 physical output channels from computer: Analogue (4), SPDIF (2) 12 DAW output streams Assignable 18 input by 6 output mixer Weight and Dimensions 1.5kg / 3.3lbs 215mm (W) x 45mm (H) x 220mm (D) (8.5 x 1.8 x 8.7 inches) Connectivity Analogue Channel Inputs (Inputs 1-2) 2 Mic XLR Combo (channels 1-2) on front panel 2 Line 1⁄4” TRS (channels 3-4) on rear panel Automatic switching between Mic / Line (channels 1-2) Switching between Line / Instrument Inputs (channels 1-2) via Saffire MixControl Application Switching between +16dBu (low) and -10dBV (high) gain on inputs 3-4 via Saffire MixControl Application Digital Channel Inputs (Inputs 5-6) 44.1 - 96kHz Stereo S/PDIF input on RCA Analogue Audio Outputs (Outputs 1-4) 4 1⁄4” TRS Jacks Output Level control (analogue) for outputs 1 and 2 Stereo Headphones Mix 1 on 1⁄4” TRS (also routed to Outputs 3 & 4) with independent volume control Digital Channel Outputs (Outputs 5-6) 44.1 - 96kHz Stereo S/PDIF Output on RCA Other I/O 1 6-pin FireWire S400 socket 2 Standard 5-pin DIN MIDI connectors: In and Out DC Power Input Connector (for use with supplied universal input power supply) Front Panel Indicators 2 2 segment input meters, Sig (-18) and O/L (0dBFS) “LKD” Locked Indicator “FW” Host Connected Indicator “Power” Indicator Instrument input source selection LED for channels 1 and 2 Phantom Power (48V) switch and LED for inputs 1 and 2

Amplifier Av Surround Receiver 7.1 MARANTZ ZR6001 (very good condition). Très rare ampli home cinéma haut de gamme Très bon état de fonctionnement ! Très bon état esthétique ! Télécommande fournie ! 14kg de technologie ! Produit très haut de gamme ! Etage de puissance et pré-amplification Puissance de sortie: 7 x 95 W RMS Impédance nominale: 8 ohms Décodeurs intégrés Dolby Digital EX, DTS ES (Matrix et Discrete), DTS Neo:6 (Cinema et Music), DTS 96/24, DPLI, DPL II (Game Movie et Music), DPLIIx, HDCD Autres effets Surround CS 6.1 (CS II Cinema, Music Mono), stéréo multicanale, Movie, Hall, Matrix, Stadium, Virtual Conversion Numérique / Analogique (N/A) et A/N Crystal: 24 Bits 192 kHz via CS42428 Traitement numérique (DSP) et type: 32 Bits via CS49400 Réponse en fréquence numérique (96kHz PCM): 8 Hz - 100 kHz (large bande) Réponse en fréquence analogique (/- 3dB): 8 Hz - 100 kHz (large bande) Rapport signal bruit: 105 dB Distorsion Harmonique Totale: 0,08% Connectique Entrées / Sorties Audio / Vidéo Entrées audio analogiques: 7 (TV, VCR1, VCR2, CD, CD-R/MD, cassette, Aux.) Entrées audio numériques: 4 (2 optiques 2 coaxiales) Entrées audio vidéo: 4 (toutes doublées S-Vidéo) Entrées composantes: 2 x YUV Entrées en façade: 1 x A/V doublée S-Vidéo Entrées analogiques: 1 x 7.1 canaux Entrée D-Bus multiroom, multi RC (flasher) Sorties audio analogiques: 4 (VCR1/ VCR2 CD-R/MD, cassette) 1 sortie auxiliaire PLC Sorties audio numériques: 2 (1 optique 1 coaxiale) Sorties audio vidéo: 2 (toutes doublées S-vidéo) Sorties Moniteur: 3 (1 x CVBS 1 x S-vidéo 1 x Y, Cb/Pb, Cr/Pr) Sorties Pré-out 7.1 Sorties D-Bus multi. alimentation commutée, multroom radio commandé Sorties Ir emitters x4 Bornes HP / possibilité fiches banane: 7 paires à vis section standard RS232C bi-directionnelle, mémoire ligne interne Fonctions de confort Télécommande RC 5500 SR (préprogrammée) Tuner RDS AM / FM (PS, PTY, RT): 50 Présélections Menu d'installation: OSD avec réglage retard enceintes UpConversion vidéo CVBS composite vers S-Vidéo et YUV composantes Composants audiophiles haute qualité Fonction Lip Sync Réglage de la synchronisation du retard acoustique avec circuits vidéo internes (200 msec/ch.) Fréquence de coupure basse réglable: 40 Hz, 60, 80, 100, 120 Hz Technologie CPL (Control Power Line) Dimensions (L x H x P): 440 x 162 x 463 mm - Poids 14 kg. Very rare high-end home cinema amplifier Very good working condition! Very good aesthetic condition! Remote control included! 14kg of technology! Power stage and pre-amplification Output power: 7 x 95 W RMS Nominal Impedance: 8 ohms Integrated decoders Dolby Digital EX, DTS ES (Matrix and Discrete), DTS Neo: 6 (Cinema and Music), DTS 96/24, DPLI, DPL II (Game Movie and Music), DPLIIx, HDCD Other surround effects CS 6.1 (CS II Cinema, Music Mono), multichannel stereo, Movie, Hall, Matrix, Stadium, Virtual Digital / Analogue (D / A) and A / D Crystal Conversion: 24 Bits 192 kHz via CS42428 Digital processing (DSP) and type: 32 Bits via CS49400 Digital frequency response (96kHz PCM): 8Hz - 100kHz (wideband) Analog frequency response (/ - 3dB): 8 Hz - 100 kHz (wideband) Signal-to-noise ratio: 105 dB Total Harmonic Distortion: 0.08% Connectivity Audio / Video Inputs / Outputs Analog audio inputs: 7 (TV, VCR1, VCR2, CD, CD-R / MD, cassette, Aux.) Digital audio inputs: 4 (2 optical 2 coaxial) Audio video inputs: 4 (all dubbed S-Video) Component inputs: 2 x YUV Front inputs: 1 x A / V doubled S-Video Analog inputs: 1 x 7.1 channels Multiroom D-Bus input, multi RC (flasher) Analog audio outputs: 4 (VCR1 / VCR2 CD-R / MD, cassette) 1 PLC auxiliary output Digital audio outputs: 2 (1 optical 1 coaxial) Audio video outputs: 2 (all S-video dubbed) Monitor outputs: 3 (1 x CVBS 1 x S-video 1 x Y, Cb / Pb, Cr / Pr) Pre-out 7.1 Multi D-Bus outputs. switched power, radio controlled multroom Ir emitters outputs x4 Loudspeaker terminals / possibility of banana plugs: 7 pairs of screws, standard section Bi-directional RS232C, internal line memory Comfort functions RC 5500 SR remote control (pre-programmed) RDS AM / FM tuner (PS, PTY, RT): 50 Presets Setup menu: OSD with speaker delay adjustment UpConversion of composite CVBS video to S-Video and component YUV High quality audiophile components Lip Sync function Adjustment of the synchronization of the acoustic delay with internal video circuits (200 msec / ch.) Adjustable low cutoff frequency: 40 Hz, 60, 80, 100, 120 Hz Powerline technology (Control Power Line) Dimensions (W x H x D): 440 x 162 x 463 mm - Weight 14 kg

Arturia Audiofuse Studio (neuf) USB 2.0 Audio Interface - 24-Bit / 192 kHz - 18 Inputs and 20 outputs - 4 Mic / line inputs: XLR / TRS combo socket - 4 Line inputs: 6.3 mm TRS - Phono input: Cinch - Inputs: 1 - 4 switchable for instruments - Inserts for inputs: 1 - 4: 6.3 mm TRS - 4 Line outputs: 6.3 mm TRS - 2 Aux outputs: 6.3 mm TRS for line signals and reamping - S/PDIF coaxial input and output: Cinch - Switchable to word clock - 2 Headphone outputs: 6.3 mm TRS and 3.5 mm TRS - 2 ADAT In / Out for maximum 8 channels @ 96 kHz Sampling Rate - Integrated Bluetooth audio receiver - Compatible with AAC and aptX - Integrated monitor controller with dim / mute / mono function - Monitor and source selection - Integrated 3-fold USB hub for external devices - USB-C socket - Supports USB 2.0 - Compatible with Windows and Mac OS X - Solid metal housing - Dimensions: 265 x 160 x 72 mm - Includes AudioFuse Creative Suite

For sale a receiver Cambridge Audio 651R It is perfectly working and in very good condition as you can see on the pictures. Not to say you may find blemishes if you want to go looking for them as not brand new, but nothing really serious. Comes with the original box, remote control, and power cord. very safe packaging, shipping to European Union accepted. Power output:     175W RMS per channel, into 6 ohms (two channels driven)     140W RMS per channel, into 8 ohms (two channels driven)     100W RMS per channel, into 8 ohms (all 7 channels driven) HDMI: HDMI 1.4a, EIA/CEA - 861D, HDCP 1.1, ARC and 3D-TV/deep color pass through supported Architecture:     Cirrus Logic CS43122 24-bit 192kHz capable DAC for Front Left & Right     Cirrus Logic CS52526 24-bit 192kHz capable CODEC for surround channels + 24-bit 2 channel A/D Conversion:     Two TI Aureus DA788 32-bit DSPs     Anchor Bay ABT2010 scaler Audio Inputs:     8x Line Level Analog     Tuner (FM/AM)     7.1 multi-channel analog     5x digital co-axial     5x digital optical Video Inputs:     4x HDMI     3x Component Video     4x Composite     4x S-Video Main Audio Outputs:     7x Amplified Speaker Outputs     7.2 Preamp outputs Main Video Output: 2 x HDMI (1.4a), ARC through HDMI A Zone 2 Outputs:     Surround back channels     2.1 preamp audio outputs     Component     S-Video     Composite video Recording Audio Outputs:     2x Line Level Analog     2x Digital Co-Axial     2x Digital Optical Other connections:     1x 1/4" / 6.35mm Headphone Output (32 To 600 ohms recommended)     3x IR emitter outputs, 1 IR Receiver Input (un-modulated)     1x IR Emitter Input (modulated)     1x zone 2 IR emitter input     1x control bus input/output     2x 12V trigger outputs     1x RS232C     1x IEC type mains inlet Power Consumption:     Max: 1400W     Standby:

Préamplificateur haut de gamme APT HOLMAN made in USA- RARE -BONNE ÉTAT. État : "Occasion" Service de livraison : Colissimo Recommandé préamplificateur haut de gamme APT HOLMAN. Apt Holman Preamplifier (1977-1983) Nombreuses entrées, double entrée vynile ajustables. Sortie external processor etc..la liste complète des caractéristiques techniques est en Anglais. bonne état de Fonctionnement Inputs Phono 2 Phono inputs. The first has selectable resistance and capacitance, while the second is fixed at 47kΩ and 50 pF. 100 mV maximum at 1 kHz, inverse RIAA, warp-proof. The right channel of each of the two phono inputs is internally adjustable ±2 dB for Line All line inputs are 50 kΩ in parallel with 330 pF. Unselected inputs are terminated with 2.2 kΩ. Maximum input level: 10 V RMS (+20 dBV or +22 dBm). 3 line-level inputs. 2 tape monitor loops. 1 external processor loop, for a total of six line-level and two phono inputs! Gain, Polarity and Volume Control 18 dB maximum gain from line inputs. Phono preamp gain: 36.5 dB at 1 kHz: 5 mV for 2 V output, 1.25 mV for 0.5 V output. All outputs are non-inverting. Volume control rated to track left-right to within 1 dB over the entire range. I'm impressed: this is a very important parameter, and this is the only preamp I've ever seen which bothers to specify it. The multiwiper 10 kΩ volume control has 32 clicks, or 31 intervals, at 10o per click, or room for 36 clicks in 360.o The volume control uses individually trimmed thick-film resistors to ensure precise channel-to-channel tracking. Outputs Two MAIN outputs, fed in parallel. Provisions on the circuit board to allow your technician to insert a fixed resistive pad in the path of the MAIN 2 output if this optimizes the gain structure for your power amplifier. 330 Ω source impedance, 5 kΩ/3,000 pF maximum load. Two tape outputs: 100 Ω source impedance, 10 kΩ/1,000 pF maximum load. One external processor output. One 1⁄4" headphone output from a separate amplifier. Frequency Response 20 - 20,000 Hz ±0.5 dB, with ultrasonic and ultrasonic filters active. RIAA EQ ±0.5 dB 30 - 15,000 Hz. Selectable 15 Hz Infrasonic filter (rear panel switch) Within 0.5 dB at 20 Hz, -3 dB at 15 Hz and > -30 dB at 5 Hz. Group delay 4 mS at 50 Hz. If the filter isn't selected, the -3 dB point is 8 Hz. Ultrasonic Filter (automatically engaged when Tone Controls active) Within 0.5 dB at 20 kHz, -3 dB at 40 kHz, and -18 dB at 100 kHz. Group delay 7 μS. Interchannel delay: < 0.5 μS. (the limit of audibility is 10 μS.) When the tone controls are defeated, the -3 dB point is 150 kHz. High Filter (only active with Tone Controls selected) -3 dB at 8 kHz. Distortion Less than 0.01% THD at rated output (2V) and lower. Less than 0.01 % SMPTE intermodulation distortion (60/7k Hz 4s1) at rated output (2V) and lower.

8 legendary Class A mic preamps in the same class as the Focusrite ISA and RED ranges. They don't make them like this anymore... This unit is in very good condition - see pictures: front face is pristine with no scratches, only a few usage scratches around the rack ears from installation (marks will be hidden again after mounted onto a rack). It never left the studio. The Octopre provides eight pristine discrete channels of Focusrite Class A mic preamp and compression, OctoPre PLATINUM routes directly to any digital audio workstation via eight standard analogue outputs. Each channel features a revolutionary compressor/limiter circuit, providing a warm-sounding compressor, which morphs into a brick wall limiter to avoid those critical overs, ensuring total control over all eight channels. The mic preamps featured in OctoPre PLATINUM are similar to those featured in the award winning Focusrite Top-Of-The-Range. They are a transistor-based Class A design utilising the same full-bandwidth philosophy as the legendary RED and ISA mic preamps, ensuring detail and clarity without colouration. The first two 'super channels' also feature phase reverse, as well as TRS jack inputs on the front fascia for quick and easy, DI-free instrument plug-in. Eight line level balanced (+4 dBu) analogue inputs and outputs are provided as standard via 25-pin D-type connectors. These D-type connectors may be routed to 8 XLR/TRS by means of an (optional) 8-way 25-pin D-type to 8 XLR/TRS breakout cable, available separately. In addition to the analogue outputs, the OctoPre can be fitted with digital output (OPTIONAL CARD). Detailed description from the focusrite website: The OctoPre is an eight channel Class A microphone preamplifier, featuring a classic Focusrite mic pre and a revolutionary compressor/limiter circuit on each channel. The mic pres featured in the OctoPre are similar to those featured elsewhere in the award winning Focusrite Platinum range. They are a transistor-based Class A design utilising the same full bandwidth philosophy as the legendary Focusrite Red and ISA mic pres, ensuring detail and organic clarity without obvious colouration. The revolutionary compressor/limiter circuit provides each channel with warmsounding compression, which morphs into brick wall limiting to avoid critical ‘overs’ when recording digitally. The first two channels also feature phase reverse, as well as unbalanced 1/4” jack inputs on the front fascia for quick and easy, DI-free plug-in of guitars and basses. With Class A Focusrite analogue signal processing and comprehensive A/D interface options, OctoPre is the perfect partner for a Pro Tools™ system or any other digital audio workstation, making high quality, multi-channel recording easy. Equally, it could be utilised as part of a compact multi-channel location recording solution (with a laptop or ADAT™, for example), or as an additional set of professional-quality mic pres for any analogue or digital console or hard disk recorder. The original OctoPre is a typical Class A Platinum design, (based around a 737 Rhom transistor) and it is solid state, it has extended bandwidth (up to at least 180kHz at the top end) and sounds transparent. The original OctoPre has an edge in being more forgiving if you want to slam the pre's hard (but more 2nd order harmonic distortion as a result). -The Octopre has a dynamics (compressor/limiter) control on each channel -The Octopre has 48V phantom power switches on each channel -The Octopre has line in and out connections on 25 pin D-sub connectors and 8 XLR inputs for mics Performance specifications: THD:0.001% @ 20dBu input, mic and line at 0dB gain Noise:-96 dB at unity gain through the unit Mic EIN:-128 dBu @ 6dB of gain with 150Ω termination impedance Frequency response:-1 dB at 10 Hz to 200 kHz Carefully packed with powercord. Shipping France: 27,80 € Shipping Europe: 36,30 €

OVERVIEW: The Alesis iO|26 uses state of the art FireWire technology to deliver professional-level features such as Alesis High Definition Microphone Preamps, Cirrus audiophile converters and jitter elimination technology, with high-quality 24-bit/192k audio input. The iO|26 is designed for easy use with PC or Mac, and has 2 headphone outputs, line-level inserts on the mic preamps, 48V phantom power, 5-segment signal/clip meters, and full MIDI and S/PDIF I/O in a convenient, portable tabletop design. The iO|26 gives you forward-thinking expansion potential, with ADAT lightpipe inputs for additional connectivity, no matter what your recording sessions may demand. Flexible, routable Hardware Direct Monitoring allows you to send a customized, latency-free mix to each output pair. An AC adapter is also included, for those using a FireWire interface that doesn't supply power. Whether you find yourself on the road or in your own studio, the iO|26 gives you the Alesis performance that professionals have depended on for decades.   FEATURES: - 24Bit/192kHz Recording for high-quality, pristine recordings - Superior Clock stability with DICE II JET Jitter Elimination Technology - Audiophile Cirrus converters to provide maximum dynamic range on inputs and outputs - Flexible, routable Hardware Direct Monitoring - Cubase LE software included (Windows and Mac compatible) - Bus or adapter powered - Mac OS X (10.4.11 - 10.8), Windows 7, Vista, and XP compatible - 8 Alesis High Definition Mic/Line Preamplifiers built in (2 switchable high-impedance inputs for direct guitar and bass recording) - Switchable Phantom Power for each channel pair - Inserts on every analog channel - 16 channels of ADAT input - 16 Channels of MIDI I/O - Stereo S/PDIF digital input - Stereo turntable input - 8 line-level outputs - 2 discrete stereo headphone outputs - Stereo S/PDIF digital output   SPECS: - Analog I/O (number and type): 8 combo XLR-1/4" and phono inputs/8 line out/2 headphone out - Digital I/O (number and type): 16 ADAT optical in, S/PDIF I/O - Platform Version (Win, Mac, Linux, etc.): Win, Mac - Bus Type: FireWire - Plug In Formats Supported (RTAS, MAS, VST, etc.): N/A - Sampling Rate (kHz): Up to 192 kHz - A/D/A Converter Bit Rate: 24-bit - Digital Recorder Resolutions (bits): N/A - Sync Types (ADAT, word clock, SMPTE, MTC, etc.): ADAT, S/PDIF - MIDI Control (yes/no): No - Number of Tracks/Virtual Tracks (ex. 32/64): 26 total inputs - Number of Locate Points: N/A - Effects/Dynamic Processing (ex. Y/N): N/N

    iFi Audio Micro iDSD DAC and Headphone Amp - with Pre amp Variable out. There is nothing like the micro iDSD. It is literally, out of this world. It is the only DAC in the world (at any price) to play True Native Octa-DSD512/PCM768/Double DXD. Its Perfect-Match means it can be fine-tuned to any headgear from IEMs all the way through to large headphones. Its 8v/4000mW output makes it one of the most powerful headamps to drive even the most hungry of headphones with ease. iFi has forged an enviable reputation for being at the forefront of computer audio technology. The micro iDSD has just made another leap, an Octa-Leap to be precise. With its special Dual-Core Burr-Brown native DSD/PCM chipset at the heart, the micro iDSD is capable of True Native PCM768, Octa-Speed DSD512 and 2x DXD; it is simply out of this world. The micro iDSD has 3 different power modes Eco, Normal and Turbo. Capable of 4000mW, 1000mW or 250mW, the micro iDSD is able to drive the full gamut of headphone and amplifiers alike. With iEMatch there to dial to suit any IEM, the micro iDSD has redefined the headphone amplifier class. Used along with the analogue volume control, the diminutive size of the micro iDSD belies its uncanny ability to drive virtually anything and everything! SmartPower® is the micro iDSD’s onboard recharging feature for Smartdevices. Its 4800mAH battery is able to fully recharge an iPhone two-times. Compatible with Apple and Android, phones and tablets, it is another example of iFi’s commitment to customer needs – enjoy high-end audio on the go without worrying about the phone going flat. iFi’s iCAN and iTube have already achieved widespread acclaim, so much so that their core features including 3D Holographic and XBass have become renowned in their own right and imitated by others. In the micro iDSD, for the first time in an iFi product, it features XBass and 3D Holographic for Headphones and Speakers. All these features are still executed in the analogue, not digital domain to preserve the original music format. And so much more….with the amazing Crowd-Design program, we are over the moon that you, the customer was central to the development of the micro iDSD. The micro iDSD is literally bursting with features – such as Direct/Pre-Amp, 3.5mm input, SPDIF Input/Output and much, much more. You will have to see it to believe it.   Specifications:     Item Description Remarks Inputs/Outputs     Inputs (rear) USB 2.0 type A “OTG” Socket (with iPurifier® technology built-in) Compatible with computers (Apple/Win/Linux), iPhone, iPod Touch, iPad and Android Devices, camera kit or USB-OTG cable required. (Full USB3.0 port compatible)   Intelligent SPDIF® Coaxial 3 Way combo SPDIF port (Coaxial In/Out; Optical In); Up to 192kHz PCM   SPDIF Optical         Outputs (rear) Audio RCA L+R     Intelligent SPDIF® Coaxial Up to 192kHz PCM       Output (right side) SmartPower® Socket Fast charge all portable devices. Compliant with USB Battery Charging Standard 1.2 – 5V @ 1.5A             Controls     Controls (front)     - HP Output Audio 6.3mm Headphone Jack   - Volume with Power On/Off switch Precision analogue volume control - 3.5mm Input   Auto disable the digital section when this is in use - X-Bass® On/Off   - 3D Holographic Sound® On/Off Auto-switching for Speakers® and Headphones® (two separate and distinct circuits)       Controls (left side)     - Power Mode Turbo, Normal, Eco Computer controlled power and gain scaling - Polarity Normal/Inverted   - Filter 3 positions, 6 filters (see filter section below)       Controls (bottom)     - Line Direct/Preamplifier Preamplifier function Enable/Disable, 0/9dB gain selectable Fixed 2V or variable with up to 5V available - iEMatch® Perfect-matching circuit for IEMs (eliminate hiss) Off / High Sensitivity Headphone / Ultra Sensitivity Headphone             DAC section     DAC Dual-core DSD, DXD, PCM DAC by Burr Brown 2-DAC Chip; 4-Channel; 8-Signals, custom interleaving for maximum SNR   Bit-Perfect DSD processing, Bit-Perfect PCM processing         Clock Ultra low jitter GMT computer controlled Femto Clock RMS jitter 12kHz – 1MHz       Audio Formats DSD 512/256/128/64 24.6/22.6/12.4/11.2/6.2/5.6/3.1/2.8 All native decoding, no internal hardware conversion   DXD 2x/1x 768/705.6/384/352.8kHz All native decoding, no internal hardware conversion   PCM 768/705.6/384/352.8/192/176.4/96/88.2/ 48/44.1kHz All native decoding, no internal hardware conversion       Filters     - PCM Bit-Perfect Processing/Minimum Phase/Standard Digital filters selectable - DSD Extreme/Extended/Standard Range Analogue filters selectable - DXD Bit-Perfect Processing Fixed analogue filter             Specifications (DAC Section)     Dynamic Range (Line) >117db(A)   THD & N (0dBFS Line)   Output Voltage (Line) >2V   Output Impedance (Zout)   Jitter (correlated) Below AP2 test set limit               Headphone Power Output     HP Amp Output Power (max) Power (continuous.) - Turbo mode 10.0V/4,000 mW @ 16 Ohm >1560 mW @ 64 Ohm - Normal mode 5.5V/1,900 mW @ 16 Ohm >950 mW @ 32 Ohm - Eco mode 2.0V/500 mW @ 8 Ohm >250 mW @ 16 Ohm             Specifications (Headamp Section)     Dynamic Range (HP) >115dB(A) (Eco Mode, 2V Out)   THD &N (HP 500mW/16R)   Output Voltage (HP) >8V (Turbo Mode)   Output Impedance (Zout)   Maximum Output Power 4,000mW @ 16 Ohm Load when using sinewave testing the iDSD micro may engage protection circuits Continuous Output Power 1,000mW @ 64 Ohm Load  

The Cara preamplifier is prefect for audiophiles looking for a quiet, fast pre-amplifier with multiple inputs and 4 channel outputs. This allows a biamped system or a speaker/sub combination to be control by the Cara Pre-amplifier. With a balance input and balanced output line drivers, the noise rejection on the inputs and outputs are very high and perfect for low noise systems. Built in a steel chassis for EMI/RFI protection, the Cara pre-amplifier will bring music details out, to deliver a greater musical experience. Pre-amplification is sometimes necessary when there is more than one source and when more than 1 output is necessary. Analog volume controls are much nicer than digital attenuation, with analog giving more details and longer decay. High attenuation capability allows the handling of high output devices like DAC and low output devices phono pre-amplifiers with moving coil cartridge. A low noise floor helps provide great music insight and better presentation. The Cara Pre-amplifier has dual outputs with independent relative volume setting, 4 inputs to select from, an analog volume control that goes from -99db to +15db in 0.5 db steps with a 10V operating headroom with a very low noise floor. This makes Cara an exceptional pre-amplifier with wide operational capability. Play your music with any source component and still get the best out of your whole stereo system. Features of the Cara preamplifier: - 2 pairs of outputs (4 channels) - Each output channel can be set to independent relative volume levels - Remote Control with mute, on/off for remote trigger (12V, 20mA), - Cardas XLR inputs, gold-plated chassis with rhodium plate metal body, teflon insulation and silver pins - External power supply with double fused inlet - Large LED display with -99 to +15db control in 0.5 db steps - Optional Isoacoustics GAIA III footers - Optional Synergistic fuses (2 required) Specifications of the Cara preamplifier - Input Voltage: +/- 10V - Output Voltage: +/- 12V - Frequency Response: 8Hz to 200kHz 0.1dB - S/N: 110dB - THD: 0.002% - Inputs: 4 inputs with individual gain presets - Outputs: 2 outputs with individual level presets - Volume range: -99db to + 15dB (0 to +115) - Input Preset Range: +/- 12dB - Output Preset Range: 0 to 115dB - Preset Max volume level: 0 to 115dB - Preset Min Volume level: 0 to 115 dB - Display Brightness settings: 1 to 9, and off - Display delay dim time range: 5 sec to 25 sec - Permanently saved settings - External Power Supply with 110V/240V - Remote Control - Display Size: 1.25" high x 6" wide, blue LED dot matrix - Remote Trigger: 12V

Emotiva Xmc 1 Gen 2 Hdmi 2.0b. État: Occasion Service de livraison: Colissimo Recommandé etat comme neuf pas de rayure complet telecommande notice cable secteur fonctionne eu et uk micro pieds antenne carte 4k hdmi2.0 b installe carte hdmi 1.4 conserve possibilite upgrade xmc dolby atmos dtsx Préampli home-cinéma 7.2 Ecran OLED bleu Menu OSD en couleurs Autocalibration Dirac Live HDMI 2.0 4K 60ips et HDCP 2.2 Mode DAC USB Filtrage de chaque canal indépendant Double sortie caisson stéréo Format audio supportés via HDMI Dolby TrueHD Dolby Digital Plus Dolby Digital 5.1 DTS-HD Master Audio DTS-HD High Resolution Audio DTS 5.1 DTS ES Discrete 6.1 PCM-Multi 5.1 PCM-Multi 7.1 DSD multicanal Modes surround post-processing Dolby Prologic IIx (PLIIx) DTS ES Matrix Reference Stereo Direct Mode Stereo Mode All Stereo Mode Connectique 8x entrées HDMI 2.0 3x entrées audio numériques optiques 3x entrées audio numériques coaxiales RCA 1x entrée audio numérique AES/EBU 2x entrée USB type A (mise à jour firmware) 1x entrée USB type B (mode USB DAC 24/192) 1x Ethernet RJ-45 (connexion avec logiciel Dirac Live 1x jeu de sorties 7.2 RCA 1x jeu de sorties 7.2 XLR 1x sortie ligne stéréo 1x sortie ligne stéréo zone 2 1x sortie casque (ampli TI TPA-6130) 2x sorties HDMI 2.0 CEC et ARC 1x sortie audio numérique optique et 1x coaxiale RCA Généralités Consommation: 35 W (0,5 W en veille) Dimensions (lxhxp): 43 x 38 x 13 cm Poids: 10 kg like new no complete stripe remote control manual power cable works eu and uk micro feet antenna 4k hdmi2.0 b card installs hdmi 1.4 card keeps possibility upgrade xmc dolby atmos dtsx Home cinema preamp 7.2 Blue OLED screen Color OSD menu Dirocal Live Autocalibration HDMI 2.0 4K 60ips and HDCP 2.2 USB DAC mode Filtering of each independent channel Double stereo box output Audio format supported via HDMI Dolby TrueHD Dolby Digital Plus Dolby Digital 5.1 DTS-HD Master Audio DTS-HD High Resolution Audio SDR 5.1 DTS ES Discrete 6.1 PCM-Multi 5.1 PCM-Multi 7.1 Multichannel DSD Post-processing surround modes Dolby Prologic IIx (PLIIx) DTS ES Matrix Reference Stereo Direct Mode Stereo Mode All Stereo Mode Connectivity 8x HDMI 2.0 inputs 3x optical digital audio inputs 3x coaxial RCA digital audio inputs 1x AES / EBU digital audio input 2x USB type A input (firmware update) 1x USB type B input (USB DAC 24/192 mode) 1x Ethernet RJ-45 (connection with Dirac Live software 1x set of 7.2 RCA outputs 1x set of outputs 7.2 XLR 1x stereo line output 1x stereo line output zone 2 1x headphone output (TI TPA-6130 amplifier) 2x HDMI 2.0 CEC and ARC outputs 1x optical digital audio output and 1x RCA coaxial General Consumption: 35 W (0.5 W standby) Dimensions (wxhxd): 43 x 38 x 13 cm Weight: 10 kg

Emotiva Xmc 1 Gen 2 Hdmi 2.0b. État: Occasion Service de livraison: Colissimo Recommandé etat comme neuf pas de rayure complet telecommande notice cable secteur fonctionne eu et uk micro pieds antenne carte 4k hdmi2.0 b installe carte hdmi 1.4 Préampli home-cinéma 7.2 Ecran OLED bleu Menu OSD en couleurs Autocalibration Dirac Live HDMI 2.0 4K 60ips et HDCP 2.2 Mode DAC USB Filtrage de chaque canal indépendant Double sortie caisson stéréo Format audio supportés via HDMI Dolby TrueHD Dolby Digital Plus Dolby Digital 5.1 DTS-HD Master Audio DTS-HD High Resolution Audio DTS 5.1 DTS ES Discrete 6.1 PCM-Multi 5.1 PCM-Multi 7.1 DSD multicanal Modes surround post-processing Dolby Prologic IIx (PLIIx) DTS ES Matrix Reference Stereo Direct Mode Stereo Mode All Stereo Mode Connectique 8x entrées HDMI 2.0 3x entrées audio numériques optiques 3x entrées audio numériques coaxiales RCA 1x entrée audio numérique AES/EBU 2x entrée USB type A (mise à jour firmware) 1x entrée USB type B (mode USB DAC 24/192) 1x Ethernet RJ-45 (connexion avec logiciel Dirac Live 1x jeu de sorties 7.2 RCA 1x jeu de sorties 7.2 XLR 1x sortie ligne stéréo 1x sortie ligne stéréo zone 2 1x sortie casque (ampli TI TPA-6130) 2x sorties HDMI 2.0 CEC et ARC 1x sortie audio numérique optique et 1x coaxiale RCA Généralités Consommation: 35 W (0,5 W en veille) Dimensions (lxhxp): 43 x 38 x 13 cm Poids: 10 kg like new no complete stripe remote control manual power cable works eu and uk micro feet antenna 4k hdmi2.0 b card installs hdmi 1.4 conservated Home cinema preamp 7.2 Blue OLED screen Color OSD menu Dirocal Live Autocalibration HDMI 2.0 4K 60ips and HDCP 2.2 USB DAC mode Filtering of each independent channel Double stereo box output Audio format supported via HDMI Dolby TrueHD Dolby Digital Plus Dolby Digital 5.1 DTS-HD Master Audio DTS-HD High Resolution Audio SDR 5.1 DTS ES Discrete 6.1 PCM-Multi 5.1 PCM-Multi 7.1 Multichannel DSD Post-processing surround modes Dolby Prologic IIx (PLIIx) DTS ES Matrix Reference Stereo Direct Mode Stereo Mode All Stereo Mode Connectivity 8x HDMI 2.0 inputs 3x optical digital audio inputs 3x coaxial RCA digital audio inputs 1x AES / EBU digital audio input 2x USB type A input (firmware update) 1x USB type B input (USB DAC 24/192 mode) 1x Ethernet RJ-45 (connection with Dirac Live software 1x set of 7.2 RCA outputs 1x set of outputs 7.2 XLR 1x stereo line output 1x stereo line output zone 2 1x headphone output (TI TPA-6130 amplifier) 2x HDMI 2.0 CEC and ARC outputs 1x optical digital audio output and 1x RCA coaxial General Consumption: 35 W (0.5 W standby) Dimensions (wxhxd): 43 x 38 x 13 cm Weight: 10 kg

ROTEL RA-1592. État: Occasion en parfaite condition, aucunes trace d’usure, le rodage vient tout juste d être terminer avec 100h d écoutes. Vendu avec la télécommande et sans la boîte d origine. The RA-1592 Integrated Amplifier leverages the strengths of our award winning RC-1590 preamplifier and RB-1582 MkII power amplifier in a sleek single chassis design. DIMENSIONS (W × H × D) 431 × 144 × 425mm 17" × 5.7" × 16" FRONT PANEL HEIGHT 3U / 132.6mm (5.25") POWER REQUIREMENTS 230V, 50Hz POWER CONSUMPTION 500W STANDBY POWER CONSUMPTION NET WEIGHT 16.8kg (37lbs.) BTU RATING 1239 BTU/h CONTINUOUS POWER OUTPUT 200W/Ch (All channels driven, 8Ω) TOTAL HARMONIC DISTORTION (THD) (20Hz–20kHz) FREQUENCY RESPONSE Line Level Inputs: 10Hz - 100kHz ±0.5dB Digital Inputs: 10Hz - 90kHz ±2dB Phono Input: 20Hz - 20kHz ±0.5dB S/N RATIO (IHF "A" Weighted) Line Level Inputs: 103dB Digital Inputs: 102dB Phono Input: 80dB There has never been a better time to be a music lover. Today’s source options provide limitless audiophile quality music. CD-or-better quality streaming, high resolution download sites, inexpensive mass storage devices, the still resilient CD and the resurgence of classic vinyl are all providing a wealth of content at impressively high fidelity. To hear all this music as the artist intended requires an extraordinarily flexible, sonically capable component. The RA-1592 Integrated Amplifier is exactly that component. It leverages the strengths of our award winning RC-1590 preamplifier and RB-1582 MkII power amplifier in a sleek single chassis design. With a powerful 200 watt per channel Class AB amplifier using performance audio grade components, the RA-1592 can effortlessly drive large speaker systems. The impressive Rotel manufactured toroidal transformer is a key element in the power supply design which also includes custom slit-foil storage capacitors and a dual-monoblock topology. All of this helps to ensure the amplifier performance stands up to even the most complex music and real world playback conditions. To complement the amplifier section, the RA-1592’s preamplifier incorporates the superb 32-bit/768kHz AKM digital-to-analogue converter (DAC) and analogue stages of the highest quality. The DAC and surrounding circuitry supports a vast array of source inputs including DSD capable PC-USB (24-bit/192kHz), 3 coaxial, 3 optical, integrated aptX® Bluetooth and front mounted USB iPod input. In recognition of the faithful analogue music lovers, there is a phono stage input (MM), XLR balanced input and 3 analogue RCA source inputs. User selectable A-B speaker outputs with 5-way binding posts, RCA pre-output and dual subwoofer outputs provide the ultimate flexibility in installation. The amplifier protection circuits monitor DC offset, overcurrent, short circuit and temperature to protect both the electronics and attached speakers. Custom integration features include RS232 and Ethernet IP control, 2 trigger outputs, remote IR input and automated digital signal sense power control for easy integration with streaming sources and control systems. The RA-1592 is the finest integrated amplifier yet in Rotel’s 55 year history of producing performance audio components.

Mint Condition 6 x 22 Thunderbolt 3 Audio Interface - Compatible with Thunderbolt 2 with optional Thunderbolt 2 to 3 adapter (not included) - Support of surround formats up to 7.1, with speaker calibration and downmix - Dual crystal clocking for low-jitter environment and clean, artifact-free recordings and stable stereo imaging - 6-Core SHARC DSP for internal UAD real-time processing - 2 Unison microphone preamplifiers - 2 Microphone inputs: XLR - 2 Hi-Z inputs: 6.3 mm jack - 6 Line inputs: 6.3 mm jack - 2 Monitor outputs: 6.3 mm jack - 6 Line outputs: 6.3 mm jack - S/PDIF coaxial input and output - 2 ADAT inputs and outputs - BNC Word clock input and output - 2 Stereo headphone ports: 6.3 mm jack - 2 Thunderbolt 3 ports - +48 V Phantom power - Pad - Low-cut - Phase reverse - Switch for monitor switchover - Function key can be assigned to Dim or Mono - LED Meter - Integrated talkback microphone - Support of surround formats up to 7.1, with speaker calibration and downmix - Dual crystal clocking for low-jitter environment and clean, artifact-free recordings and stable stereo imaging - For Mac/Windows - Up to 4 Apollos with Thunderbolt cascading connection - Design: 19" / 1U

État de la marchandise: Excellent état Première main: 2ème Prix neuf: 4500€ Emballage d'origine conservé: oui Documentations conservées: oui Description générale: MYRYAD MXD6000 Type Multichannel processor/pre-amp Processing modes Dolby Digital EX/Pro-Logic II, DTS-ES/Neo:6, Myryad Cinema EQ Digital audio inputs 2 optical, 4 coax Digital audio outputs 1 optical Line audio inputs 7.1-channel, 9 stereo Line audio outputs 7.1-channel, 3 stereo Video inputs 6 composite, 6 S-Video Video outputs 3 composite, 3 S-Video Zone 2 output Yes, composite video plus stereo audio Other connections RS232, 12V trigger x3, MY-Link remote system Accessories supplied Learning remote handset theatermaster remote SL-9000 Dimensions (sVxHxD) 43 6x9 5x34.3cm

Show Tech RONDSON MA-4120 Amplificateur mélangeur 4 x 40W RMS, 100V Ces amplificateurs-mélangeurs offrent 5 entrées routables sur 4 zones de sortie contrôlables séparément. MA-4075 Il est équipé de: • 4 amplificateurs de puissance soit 4 X 120 WATTS RMS • 3 entrées universelles combo XLR & JACK 6,35 mm, MICRO/LIGNE et alimentation fantôme paramétrable • 2 entrées AUX RCA • 1 entrée TEL avec fonction priorité routable par zone • Talk-over prioritaire sur Entrée MIC 1 • 4 sorties zones chacune avec vumètre du niveau de sortie et réglage de volume • 1 sortie Haut-Parleur de contrôle • 1 sortie casque avec réglage de volume • Sorties HP sur bornier BI 4 O et 8 O, HI 25 V, 70 V, ou 100 Volts • Sortie line Out sur bornier pour chaque zone • Ventilateur de refroidissement Show Tech RONDSON MA-4120 Mixer amplifier 4 x 40W RMS, 100V   These mixer amplifiers offer 5 routable inputs on 4 separately controllable output zones.   MA-4075 It is equipped with: • 4 power amplifiers or 4 X 120 WATTS RMS • 3 universal XLR & JACK 6.3mm combo inputs, MICRO / LINE and configurable phantom power • 2 AUX RCA inputs • 1 TEL input with routable priority function per zone • Priority talk-over on MIC 1 input • 4 zone outputs each with output level meter and volume control • 1 speaker control output • 1 headphone output with volume control • HP outputs on BI 4 O and 8 O, HI 25 V, 70 V, or 100 Volts terminal block • Line Out output on terminal block for each zone • Cooling fan

Mélangeur ECLER SAM 312 Excellent état Excellente réponse en fréquence rack 19 pouces 1 unité. Idéal bar, restaurant etc… Panneau avant : Mélangeur de canaux d'entrée par bouton Input 1, 2,3. A noter qu’un micro peut être branché aussi en face avant uniquement sur la voie 1 - Contrôle de tonalité Triple (accessible uniquement avec un tournevis en face avant) - 3 LED mètre du niveau de sortie Réglage de sortie OUTPUT Réglage du Monitor surveillance générale MIX (Casque) Prise casque jack 6,35mm Bouton de mise en marche (Vert)   Rack à montage latéral oreilles avec 2 positions possibles pour un alignement parfait de la face avant avec d'autres appareils dans le même rack   -Panneau arrière : Signal de bouton sélecteur d'entrée (MIC / LINE) *3 entrées MICRO   en jack 6,35mm ou *3 entrées ligne stéréo (2X RCA) adaptées aux sources comme : MP3 (iPod®, etc.) et les ordinateurs portables. *Entrée MIX Direct permet la connexion d'autres mélangeurs. *2 sorties REC stéréo supplémentaires (REC1, REC2) *2 sorties stéréo (XLR   et 2 RCA) *Mode Mono bouton-poussoir Connexion pour une extension MUTE   par shunt du connecteur.(vert). (EUROBLOCK) permet la connexion avec les systèmes de détection d'incendie Prise protégée par fusible et Câble d’alimentation fourni   Dimensions: 440 × 44 × 170 (L x H x P) Poids: 2600 grammes Prix neuf généralement constaté: 399€ Prix ferme non négociable: 80 €   A retirer sur place à Juvignac. Ou expédition possible à vos frais: Colissimo : Rajoutez 14,10 € soit   94,10€ livré. Mondial Relay : Rajoutez 6,50 € soit   86,50 € livré. Pour tout renseigneme nt:   Thierry POUGET       ECLER SAM 312 Mixer Excellent condition Excellent in frequency response 19 inch rack 1 unit.   Front panel: Input channel mixer by Input 1, 2,3 button. Note that a microphone can also be connected to the front panel only on channel 1 - Triple tone control (accessible only with a screwdriver on the front panel) - 3 LED output level meter OUTPUT control Monitor control general monitoring MIX (Headphones) 6.35mm headphone jack Power button (Green)   Side-mounted rack with 2 possible positions for perfect front panel alignment with other devices in the same rack   -Rear panel: Signal input selector switch (MIC / LINE) *3 MICRO inputs in 6.35mm jack or *3 stereo line inputs (2X RCA) suitable for sources such as: MP3 (iPod®, etc.) and laptop computers. *MIX Direct input allows connection of other mixers. *2 additional stereo REC outputs (REC1, REC2) *2 stereo outputs (XLR and 2 RCA) *Mono push button mode Connection for MUTE extension by shunting the connector (green). (EUROBLOCK) allows connection to fire detection systems Fuse protected socket and power cable supplied   Dimensions: 440 × 44 × 170 (W x H x D) Weight: 2600 grams New price generally observed: 399€. Price: 80 €.   For any information:   Thierry POUGET

Imagine Communications Harris X85HD-AV-2PS TBC / Frame Synchronizer / scaler /optical fiber vendu avec son Flightcase General Description Offering unparalleled flexibility,the X85-3G/X85HD/X75SD product line provides up to nine video inputs and ten video output formats,depending upon the following available options: • Two HDTV optical fiber serial component digital video inputs and outputs (X85) or one HDTV optical fiber serial component digital video input and output (X75) • Two HDTV coaxial inputs and outputs on independent paths (X85) or two HDTV coaxial inputs and outputs using the same path (X75) • Two SD-SDI serial component digital video inputs and outputs • One 128 x 96 thumbnail streaming source and one 352 x 240 pixel (525) or 352 x 288 pixel (625) streaming-over-IP video/audio output • Component analog video (Betacam®) input and output • S-video (S-VHS/Hi8) input and output • NTSC/PAL-M/PAL-B/SECAM composite video input and output •RGB-S output • DVI-D output Inputs Inputs are capable of auto-detection, with user-selectable SMART alarms. Two input modes (both ofwhich allow for either automatic detection or user-selection of inputs) are available for processingcritical program paths for ingest, and bridging between routers/tape transports/servers, mobile broadcast, and edit suites. Video Processing Processing for video includes level/color control, aspect ratio conversion, 3D-adaptive color de coding, noise reduction, frame synchronization and time base correction for non-synchronous signals, analog-to-digital and digital-to-analog video conversion. Other capabilities include the following: • Up and down conversion • Aspect ratio control • High-definition cross-conversion Audio Processing Processing for audio includes level control, analog-to-digital and digital-to-analog conversion, and SD-SDI and HD-SDI serial digital signal embedding and de-embedding. Other capabilities include the following: • Sample rate conversions, synchron ization, and timing-to-video for correction of lip sync errors • Embedding/de-embedding of signals such as Dolby E™ and AC-3™ • Processing of multiple channel program signalsfor surround-sound applications before or after compression • Audio-follow-video routing • Converting, adjusting, timing,demultiplexing, and multiplexing Signal Control and Monitoring You can control and monitor signals using a variety of methods: • Local X85-3G/X85HD/X75SD control panels • Remote X75-RCP control panels • Web server software • Local DPS-575 control panels • Remote RC-575 control panels • CCS™-enabled hardware controls • CCS software applications and QuickTime Player • SNMP control systems Operating Modes The X85 and X75 have four main operational modes: • Auto Detect (default mode) • M-Path (multiple path) • Simulcast • All Output Select X75 and X85 General Functionality • Upgradability from SDTV to HDTV, and HDTV to 3 Gb/s • Frame syncs for analog, SDTV and HDTV • Upconversion, downconversion, crossconversion, and aspect ratio conversion • Analog-to-digital conversion • Digital-to-analog conversion • Proc amps for analog, SDTV and HDTV • Video test generation • Optional video noise reduction and enhancement • Optional HD and SD color correction • 8, 16, or 32 channels of internal audio processing (gain, invert,swap, sync/delay,sum) • Embedding and de-embedding for SD-SDI, HD-SDI, and 3 Gb/s • Compressed audio capability (Dolby E®and AC-3®) • Video and audio timing correction • Streaming video capability • SD memory card parameter settings storage • Audio (and embedded) test generation • Audio limiting capability • Built-in Web server with thumbnail monitoring capability • Available redundant power supply • Active Format Description (AFD), audio metadata, closedcaptioning, and DVB Teletext captioning capabilities • Optional program delay for video and embedded audio Input/Outputs • Auto-detected inputs • Two SD-SDI and

- Attention: la source d'alimentation ne fonctionne qu'avec 120V. Behringer Xenyx QX1202USB Features: - Compact, low-noise, high-headroom analog mixer - Four Xenyx mic preamps comparable to stand-alone preamps - 48V phantom power for use with condenser microphones - Compressors feature super-easy "one-knob" functionality and control - Built-in stereo USB/Audio Interface to connect directly to your computer - Neo-classic "British" 3-band EQs for warm and musical sound - Per-channel FX send for internal FX processor and/or external send - 24-bit Klark Teknik FX processor with 100 presets, including: - Reverb, chorus, flanger, delay, pitch shifter and various multi-effects - FX to control room/main gives you flexible effects monitoring options - Main mix outputs plus separate control room, phones and 2-Track outputs - 2-track/USB inputs assignable to main mix or control room/phones output - Free software, downloadable at behringer.com: - Audio recording, editing, and podcasting software - 150 instrument/effect plug-ins - High-quality components and rugged construction ensure long life Tech Specs - Type: Analog - Channels: 12 - Computer Connectivity: USB (2 x 2) - Faders: 1 x 60mm Throw - Inputs - Mic Preamps: 4 x XLR - Phantom Power: 4 - Inputs - Line: 12 x TRS - Inputs - Other: 2 x RCA - Outputs - Main: 4 x TRS - Outputs - Other: 2 x RCA - Aux Sends: 1 x Post - Send/Return I/O: 1 x TRS (Send), 1 x TRS (Return) - Busses/Groups: 2 Bus - Headphones: 1 x 1/4" - USB: 1 x Type B - EQ Bands: 3-band - Effects: Yes - Height: 2" - Width: 9.8" - Depth: 9.8" - Weight: 3.3 lbs. - Manufacturer Part Number: 000-ALR02-00010

Platine minidisc refait à neuf. Elle fonctionne parfaitement. Specifications Type: Mini disc player / recorder Track system: 2-channel stereo Optical pickup: KMS-210A/J-N Sampling frequency: 44.1kHz Frequency response: 5Hz to 20kHz Signal to noise ratio: 105dB Analogue inputs: 125mV (line) Analogue outputs: 2.0V (line) Digital Inputs: coaxial, optical Digital outputs: optical Dimensions: 430 x 125 x 375 mm Weight: 14.3 kg SONY MDS-JA50ES MD Minidisk recorder. État: Reconditionné par le vendeur

SONY MB-806A TUNER BASE UNIT Wireless Microphone Frame Tuner Base. BON ETAT GENERAL GOOD GENERAL CONDITION SHIPPING POSSIBLE TO FRANCE, BELGIUM, UK, SPAIN, PORTUGAL, ITALY, LUXEMBOURG, NETHERLANDS, AUSTRIA. OTHER COUNTRIES ASK FOR SHIPPING COSTS. Features The Sony MB-806AUHF Tuner Base Unit features a modular design that conveniently accommodates up to six WRU-806A tuner modules. Up to six transmitters may be used simultaneously with six WRU-806A tuner modules installed. The rear panel provides six XLR (mic/line selectable) outputs and a stereo mix output. The MB-806A features a single 19" rack space design. Holds up to 6 "WRU" diversity tuner modules in 1 rack space. Compact modular design allows user configurability of one to six diversity tuners in a single rack space *WRU-806A tuner modules are sold seperately Built-In Active Antenna Divider Allows one pair of AN-820A or K1314 antennas to operate all six channels Supplies 9v DC antenna power to antenna jacks Output Level Switch Selects mic or line operating level for all outputs. Antenna Gain Switch Allows user to adjust antenna sensitivity to prevent overload of antenna section of receiver

Nice Pioneer A-109 Stereo amplifier Direct Energy MOS Phono, Tuner, cd, line/aux Inputs and tape inputs/outputs Bel état, tout fonctionne comme il faut. Quelques légères marques et traces d'usages sur le capot, voir photos Pas de prix de réserve, regardez mes autres annonces;) Envoi 35 € en Europe seulement Demandez moi pour d'autres contrées Bonne chance ! ^^^^^^^ ^^^^^^^ ^^^^^^^ Nice Pioneer A-109 Stereo amplifier Direct Energy MOS Phono, Tuner, cd, line/aux Inputs and tape inputs/outputs Nice condition, everything's working as it should. Some light marks and traces of use on the cover, see photos. No reserve price, look at my other ads;) Shipping 35 € in Europe only; Ask me for other countries Good luck!

M-Audio Projet Mix I/O - Sensitve Motorized Faders Audio Interface Firewire Fully working state. Coming in its original box. => Offered: 1x CD-ROM PROTOOLS M-POWERED 7 + 1 Dinkey Dongle => Original packaging contains:  - 1x Mac Firewire cable - 1x PC Firewire cable - 1x power supply - 1 x driver CD-ROM - User Guides OVERVIEW: M-Audio ProjectMix I/O is a control surface combined with a FireWire 18x14 audio interface that turns your computer into a complete digital production station. Features include 9 touch-sensitive motorized moving faders and 8 assignable endless rotary encoder knobs for channel or plug-in functions. I/Os include: 8 switchable phantom-powered analog mic/line inputs (XLR and 1/4" TRS balanced) with switchable phantom power and signal/peak LEDs; 8x8 ADAT Lightpipe; MIDI with activity LEDs; 2x2 S/PDIF coaxial optical/digital; 4 analog outputs (1/4" TRS balanced); 2 stereo headphone outputs (1/4" TRS) with independent level controls; and one front-panel instrument input (1/4" TS) switchable for input one. Each channel on this M-Audio Controller features mic/line, record enable, select, solo, and mute buttons. Channels and banks are selected via ± keys. A zoom key is included, with 4 directional keys, as well as dedicated keys for in/out points, locate, region nudge, and more.  Illuminated transport controls and a jog/shuttle wheel with a mode switch allow effortless navigation. The M-Audio ProjectMix control surface includes dedicated keys for in/out points, locate, region nudge, loop, and more. LED displays clearly display each channel's status. Word clock I/O (BNC) is supported. Compatible with Mackie Control, Logic Control, and HUI protocols plus support for most other popular applications.  SPECIFICATIONS: Connection FireWire Faders 8 x Touch-sensitive motorized channel faders 1 x Touch-sensitive motorized master fader Transport Controls Yes (illuminated) Jog/Shuttle Yes Rotary Controls 8 x Assignable rotary encoders Numeric Keypad No Display LCD for channel or plug-in functions Function LED display for each channel Softwares Supported but not provided: - Pro Tools M-Powered 7 or greater - Ableton Live 5 (version 5.02 or greater) - Logic (version 7.1.1 or greater) - Cubase (version 3.1 or greater) - Digital Performer (version 4.6 or greater) - SONAR (version 4.02 or greater)  System Requirements Mac (but not provided): G3 800MHz or G4 733MHz higher (may be higher for laptops)- G3/G4 accelerator cards not supported OS X 10.3.9 / 10.4.2 512MB RAM Available FireWire port or FireWire expansion card PC (but not provided): Pentium III 800MHz or higher (may be higher for laptops) Windows XP (SP2) DirectX 9.0c or higher 512 MB RAM Available FireWire port or FireWire expansion card Dimensions (WxDxH) 46 x 51 x 10 cm Weight approx. 12.5 kg Specialties Built-in 18 x 14 FireWire audio interface - no additional hardware required Will be sent well packed. Shipping to France: 28,55€ € Shipping to Europe and UK: 61,50 € Shipping to International: Please ask before bidding Accepted payment: Please only, PayPal

Roland MC-909: Sampling Groovebox • Excellent état général extérieur et intérieur. • La Groovebox a été entièrement révisée et nettoyée. • Les 16 pads sont neufs (changés il y a trois mois). • Tout fonctionne parfaitement. • La dernière version du système a été installée. • Livrée avec une carte SmartMedia de 64 Mo. • Manuels en PDF (français / anglais / manuel de service). -> L'expédition se fera dans un colis bien protégé, en Colissimo avec numéro de suivi. Caractéristiques techniques: - Echantillonneur de 16 Mo interne extensible à 256 Mo - Fonctions "CHOP", "Time Stretch", "Normalize", "Emphasis" - Fonction "Resample" - 2 Multi-effets (2x56 types) avec contrôleurs temps réel - Outils de Mastering intégrés - Emulation: permet de contrôler le pitch et le tempo de n'importe quel échantillon audio ou de l'ensemble du séquenceur - Lecteur de carte Smart Média - Double "DBEAM" - Connexion USB pour le transfert des échantillons - 6 sorties analogiques séparées - Entrées ligne stéréo - Entrée/ sortie S/PDIF optique et coax - Véritable synthétiseur - Architecture sonore dérivée des séries XV - 693 formes d'ondes, dont les sons de la carte SRX "Dance" - Extension par carte SRX (1 slot) - Large écran LCD rétro éclairé - 8 faders de contrôle - 16 parties simultanées - 64 voix de polyphonie - Temps d’échantillonnage: Standard 16 Mo: mono. 180sec (stéréo 90 sec). Jusqu'à 272 Mo (standard 16 Mo + DIMM 256 Mo): mono. 51 min (stéréo 26 min). compatible avec les formats WAV/AIFF, format de sauvegarde audio: WAV/AIFF - Effets de mastering: compresseur et égaliseur graphique 3 bandes - Séquenceur 16 pistes + piste tempo/Mute Control - Tempo: 5 – 300 BPM - 128 styles preset - 128 user - Nombre de notes maxi: 1300000 - Fichier exécutable: Standard MIDI Files (Format 0/1) - 6 sorties séparées - 2 entrées ligne - Prise casque - MIDI: IN, OUT - S/PDIF In, out - Dimensions: 49,1 x 38,6 x 12,3 cm - Poids: 6 kg Roland MC-909: Sampling Groovebox • Excellent general condition outside and inside. • The Groovebox has been completely overhauled and cleaned. • The 16 pads are new (changed three months ago). • Everything works perfectly. • The latest version of the system has been installed. • Delivered with a 64 MB SmartMedia card. • Manuals in PDF (French / English / service manual). -> Shipping will be done in a well protected parcel, in Colissimo (French Post) with tracking number. Technical specifications: - Sampler of 16 Mo internal expandable to 256 Mo - Functions "CHOP", "Time Stretch", "Normalize", "Emphasis" - Resample function - 2 Multi-effects (2x56 types) with real-time controllers - Integrated Mastering Tools - Emulation: allows you to control the pitch and tempo of any audio sample or the entire sequencer - Smart Media Card Reader - Double "DBEAM" - USB connection for sample transfer - 6 separate analogue outputs - Stereo line inputs - Optical and coaxial S/PDIF input/output - True synthesizer - Sound architecture derived from the XV series - 693 waveforms, including sounds from the SRX "Dance" card. - Expansion by SRX card (1 slot) - Large backlit LCD screen - 8 control faders - 16 simultaneous games - 64 polyphonic voices - Sampling time: Standard 16 MB: mono. 180sec (stereo 90 sec). Up to 272 MB (Standard 16 MB + DIMM 256 MB): mono. 51 min (stereo 26 min). compatible with WAV/AIFF formats, audio backup format: WAV/AIFF - Mastering effects: compressor and 3-band graphic equalizer - 16-track sequencer + Tempo/Mute Control track - Tempo: 5 - 300 BPM - 128 preset styles - 128 wear - Maximum number of notes: 1 300 000 - Executable File: Standard MIDI Files (Format 0/1) - 6 separate outputs - 2 line inputs - Headphone socket - MIDI: In, Out - S/PDIF: In, out - Dimensions: 49.1 x 38.6 x 12.3 cm - Weight: 6 kg