Peak design shell medium

Protégez votre appareil photo de l'eau, la neige, la poussière et l'abrasion, que ce soit dans vos mains, sur le trépied, votre sac à dos ou dans votre sacoche. Tissu extensible avec une membrane imperméable à l'eau pour garder votre appareil en toute sécurité sans ajouter de volume ou entraver votre flux de travail. Small Shell: Mirrorless *. Ex: Sony NEX, Sony série a7 et a7ii, tous Micro 4/3 caméras, etc. DSLR APSC-capteur avec kit ou petites lentilles de choix et pas de prise de la batterie. Ex: Canon Rebel, Nikon D3xxx-5xxx Objectif Ex: 18-55mm objectif DX, 35mm, 50mm objectifs DX, etc. * Presque tous les objectifs de taille. Si vous utilisez un a7ii Sony avec l'objectif Sony 70-200 FE, vous aurez besoin d'un medium Shell. Medium Shell: DSLR APSC-capteur avec tous les objectifs de taille * et / ou poignée de batterie. Ex: Canon Rebel, Nikon D3xxx-5xxx, etc. Objectif Ex: Les DX lentilles de format DSLR plein format avec des objectifs aussi longtemps qu'un f2.8 24-70 et aucune prise de batterie. Ex: Canon 7D, 5D, Nikon D7xxxx, Nikon D6xx-8xx, etc. Objectif ex: Tout premier objectif, objectif grand-angle, Nikon / Canon 24-70 f2.8, ou tout téléobjectif / zoom qui est plus courte que 5 po (127 mm) en position fermée sans le pare-soleil sur. * Toutes lentilles taille de DX. Si vous utilisez un f2.8 pro Nikon 70-200 sur un corps de D5300 Nikon, vous aurez besoin d'un Large Shell. Large Shell: DSLR plein format avec tous les objectifs de taille * et / ou poignée de batterie. Ex: Canon 7D, 5D, Nikon D7xxxx, Nikon D6xx-8xx, etc. Objectif ex: Nikon / Canon 70-200 f2.8, tout téléobjectif / zoom 300mm + Pro DSLR avec tous les objectifs de taille *. Ex: Canon 1D, Nikon D4 * Presque tous les objectifs de taille. Si vous utilisez 600mm + lentilles, Shell va adapter autour de votre corps de la caméra, mais ne couvre pas la totalité de votre objectif.

Protégez votre appareil photo de l'eau, la neige, la poussière et l'abrasion, que ce soit dans vos mains, sur le trépied, votre sac à dos ou dans votre sac oche. T issu extensible avec une membrane imperméable à l'eau pour garder votre appareil en toute sécurité sans ajouter de volume ou entraver votre flux de travail. Small Shell: Mirrorless  *. Ex: Sony NEX, Sony série a7 et a7ii, tous Micro 4/3 caméras, etc. DSLR APSC-capteur avec kit ou petites lentilles de choix et pas de prise de la batterie. Ex: Canon Rebel, Nikon D3xxx-5xxx Objectif Ex: 18-55mm objectif DX, 35mm, 50mm objectifs DX, etc. * Presque tous les objectifs de taille. Si vous utilisez un a7ii Sony avec l'objectif Sony 70-200 FE, vous aurez besoin d'un medium Shell. Medium Shell: DSLR APSC-capteur  avec tous les objectifs de taille * et / ou poignée de batterie. Ex: Canon Rebel, Nikon D3xxx-5xxx, etc. Objectif Ex: Les DX lentilles de format DSLR plein format avec des objectifs aussi longtemps qu'un f2.8 24-70 et aucune prise de batterie. Ex: Canon 7D, 5D, Nikon D7xxxx, Nikon D6xx-8xx, etc. Objectif ex: Tout premier objectif, objectif grand-angle, Nikon / Canon 24-70 f2.8, ou tout téléobjectif / zoom qui est plus courte que 5 po (127 mm) en position fermée sans le pare-soleil sur. * Toutes lentilles taille de DX. Si vous utilisez un f2.8 pro Nikon 70-200 sur un corps de D5300 Nikon, vous aurez besoin d'un Large Shell. Large Shell: DSLR plein format  avec tous les objectifs de taille * et / ou poignée de batterie. Ex: Canon 7D, 5D, Nikon D7xxxx, Nikon D6xx-8xx, etc. Objectif ex: Nikon / Canon 70-200 f2.8, tout téléobjectif / zoom 300mm + Pro DSLR avec tous les objectifs de taille *. Ex: Canon 1D, Nikon D4 * Presque tous les objectifs de taille. Si vous utilisez 600mm + lentilles, Shell va adapter autour de votre corps de la caméra, mais ne couvre pas la totalité de votre objectif. store powered by Shopping-Feed.com)

produit Protégez votre appareil de l'eau, la neige, la poussière et à l'abrasion, que ce soit dans vos mains, sur le trépied ou sur votre sac à dos. Générales EAN 0855110003492 Marque PEAK DESIGN Caractéristiques du produit Modèle compatible NC Marque compatible NC Nombre de pièces 1 Type d'accessoire Housse de protection Dimensions et poids Poids (en g) 1.0

En très bon état, juste marquage sur le couvercle intérieur, voir les photos Revente car changement de matériel Merci ! =)

Change your language: Change your language: Change your language: Change your language: Change your language: Global-Audio-Store STUDIO - HOME STUDIO INSTRUMENT INFORMATIQUE MUSICALE LOGICIEL MAO ESPACE DJ ESPACE GUITARE ESPACE FLIGHT-CASE TRAITEMENT ACOUSTIQUE SONORISATION CÂBLES AUDIO ACCESSOIRES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES JBL - AM5215/95 Référence: AM5215/95 1 890,00 € Disponibilité:  Disponible sur commande Livraison:  Nous contacter pour vérifier la disponibilité et de délai Garantie: 4 ans pièces & main-d'oeuvre En Savoir Plus JBL - AM5215/95 - Enceinte 2 voies Les enceintes de la série AE (Application Engineered) sont conçues pour répondre à une large variété d’applications dans le domaine de l’installation fixe: conservatoires, théâtres, auditoriums, lieux de culte, discothèques, parcs à thèmes, etc... Certains modèles peuvent être utilisés sans complément de basses dans des applications classiques de renforcement sonore et de rappel acoustique. Certains autres, plus petits, sont parfaits pour la sonorisation de hall de type bibliothèque ou amphithéâtre, ainsi que tout rappel acoustique de système de sonorisation de grande taille. DIVERSITE DE SYSTEMES Les modèles de la série AE comportent une grande diversité de taille et de type d’enceintes pour proposer une solution totalement adaptée à vos installations. La série 7000 regroupe les modèles les plus puissants, puis la série 5000 et enfin la série 2000 pour les puissances moins importantes. GUIDE D’ONDE Les enceintes de la gamme AE sont optimisées pour un contrôle parfait de la directivité grâce à leur guide d’onde utilisant la technologie Progressive Transition. Dans la plupart des modèles, les guides d’onde peuvent être tournés de 90°, afin d’offrir une directivité inversée ou permettre l’utilisation de l’enceinte dans une position différente. FILTRAGE SOPHISTIQUE Les modèles de la série AE utilisent des filtres sophistiqués pour un meilleur respect de la qualité audio. Ces filtres du 4éme ordre (24dB/octave) permettent notamment de contribuer à mieux restituer le signal audio tout en diminuant les effets de bord sur les fréquences adjacentes. La plupart des enceintes AE comportent également des modes de filtrages commutables: tri-amp/bi-amp ou bi-amp/passif UNE GRANDE POLYVALENCE Toutes les enceintes de série AE sont disponibles en différentes versions pour s’adapter aux décors d’intérieur et d’extérieur. Tous les modèles existent en finition noire ou blanche (référence se terminant par WH) ou en version brute, prêts à peindre (référence se terminant par UF). Par ailleurs, pour la plupart des environnements extérieurs, l’option de base de résistance à l’humidité est indiquée en fin de référence par WRC. Pour les cas extrêmes, la finition WRX pourra être proposée. Caractéristiques Techniques: * Type: 2 voies Moyenne puissance * Réponse en fréquence: * 41 Hz - 18 kHz (± 3 dB) * Dispersion: 90° x 50° * Puissance (AES/Programme/Crête): * BF: 350W/700W/1400W * HF: 35W/75W/150W * SPL Max: * BF: 125 dB * HF: 129 dB * MODE PASSIF: 124 dB * Sensibilité (1W/1M): 96 dB (passif) * Modes de crossover: Bi-amp/Passif * Suspension: 15 points * Dimensions (h x l x p): 781 x 420 x 503 * Poids: 25 kg JBL - AM5215/95 Reference: AM5215/95 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer More info JBL - AM5215/95 - 2-Way Loudspeaker System The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB): 35 Hz - 20 kHz * Frequency Response (±3 dB): 41 Hz – 18 kHz * Coverage Pattern: 90° x 50° * Directivity Factor (Q): 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes: Bi-amp/Passive switchable * Passive Crossover Frequency: 2 kHz * Transducer Power Rating (AES): * LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL: Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m): Passive mode: 98 dB SPL * Low Frequency: Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m, within operational band): 99 dB SPL * High Frequency Driver: JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m): 115 dB SPL * Waveguide: PT-H66HF-1 * Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish: Black DuraFlex™ finish. White available upon request. * Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in vertical cabinet orientation): 783 x 422 x 504 mm (30.8 x 16.6 x 19.85 in) * Net Weight: 25.0 kg (55 lb) * Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 JBL - AM5215/95 Referencia: AM5215/95 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Más JBL - AM5215/95 - 2-Way Loudspeaker System The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB): 35 Hz - 20 kHz * Frequency Response (±3 dB): 41 Hz – 18 kHz * Coverage Pattern: 90° x 50° * Directivity Factor (Q): 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes: Bi-amp/Passive switchable * Passive Crossover Frequency: 2 kHz * Transducer Power Rating (AES): * LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL: Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m): Passive mode: 98 dB SPL * Low Frequency: Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m, within operational band): 99 dB SPL * High Frequency Driver: JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m): 115 dB SPL * Waveguide: PT-H66HF-1 * Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish: Black DuraFlex™ finish. White available upon request. * Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in vertical cabinet orientation): 783 x 422 x 504 mm (30.8 x 16.6 x 19.85 in) * Net Weight: 25.0 kg (55 lb) * Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 JBL - AM5215/95 Artikel-Nr: AM5215/95 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Produktinfos JBL - AM5215/95 - 2-Way Loudspeaker System The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB): 35 Hz - 20 kHz * Frequency Response (±3 dB): 41 Hz – 18 kHz * Coverage Pattern: 90° x 50° * Directivity Factor (Q): 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes: Bi-amp/Passive switchable * Passive Crossover Frequency: 2 kHz * Transducer Power Rating (AES): * LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL: Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m): Passive mode: 98 dB SPL * Low Frequency: Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m, within operational band): 99 dB SPL * High Frequency Driver: JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m): 115 dB SPL * Waveguide: PT-H66HF-1 * Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish: Black DuraFlex™ finish. White available upon request. * Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in vertical cabinet orientation): 783 x 422 x 504 mm (30.8 x 16.6 x 19.85 in) * Net Weight: 25.0 kg (55 lb) * Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 JBL - AM5215/95 Riferimento: AM5215/95 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Dettagli JBL - AM5215/95 - 2-Way Loudspeaker System The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB): 35 Hz - 20 kHz * Frequency Response (±3 dB): 41 Hz – 18 kHz * Coverage Pattern: 90° x 50° * Directivity Factor (Q): 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes: Bi-amp/Passive switchable * Passive Crossover Frequency: 2 kHz * Transducer Power Rating (AES): * LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL: Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m): Passive mode: 98 dB SPL * Low Frequency: Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m, within operational band): 99 dB SPL * High Frequency Driver: JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m): 115 dB SPL * Waveguide: PT-H66HF-1 * Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish: Black DuraFlex™ finish. White available upon request. * Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in vertical cabinet orientation): 783 x 422 x 504 mm (30.8 x 16.6 x 19.85 in) * Net Weight: 25.0 kg (55 lb) * Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 Global Audio Store, Revendeur JBL agréé Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer

Change your language: Change your language: Change your language: Change your language: Change your language: Global-Audio-Store STUDIO - HOME STUDIO INSTRUMENT INFORMATIQUE MUSICALE LOGICIEL MAO ESPACE DJ ESPACE GUITARE ESPACE FLIGHT-CASE TRAITEMENT ACOUSTIQUE SONORISATION CÂBLES AUDIO ACCESSOIRES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES JBL - AM5212/66 Référence: AM5212/66 1 790,00 € Disponibilité:  Disponible sur commande Livraison:  Nous contacter pour vérifier la disponibilité et de délai Garantie: 4 ans pièces & main-d'oeuvre En Savoir Plus JBL - AM5212/66 - Enceinte 2 voies Les enceintes de la série AE (Application Engineered) sont conçues pour répondre à une large variété d’applications dans le domaine de l’installation fixe: conservatoires, théâtres, auditoriums, lieux de culte, discothèques, parcs à thèmes, etc... Certains modèles peuvent être utilisés sans complément de basses dans des applications classiques de renforcement sonore et de rappel acoustique. Certains autres, plus petits, sont parfaits pour la sonorisation de hall de type bibliothèque ou amphithéâtre, ainsi que tout rappel acoustique de système de sonorisation de grande taille. DIVERSITE DE SYSTEMES Les modèles de la série AE comportent une grande diversité de taille et de type d’enceintes pour proposer une solution totalement adaptée à vos installations. La série 7000 regroupe les modèles les plus puissants, puis la série 5000 et enfin la série 2000 pour les puissances moins importantes. GUIDE D’ONDE Les enceintes de la gamme AE sont optimisées pour un contrôle parfait de la directivité grâce à leur guide d’onde utilisant la technologie Progressive Transition. Dans la plupart des modèles, les guides d’onde peuvent être tournés de 90°, afin d’offrir une directivité inversée ou permettre l’utilisation de l’enceinte dans une position différente. FILTRAGE SOPHISTIQUE Les modèles de la série AE utilisent des filtres sophistiqués pour un meilleur respect de la qualité audio. Ces filtres du 4éme ordre (24dB/octave) permettent notamment de contribuer à mieux restituer le signal audio tout en diminuant les effets de bord sur les fréquences adjacentes. La plupart des enceintes AE comportent également des modes de filtrages commutables: tri-amp/bi-amp ou bi-amp/passif UNE GRANDE POLYVALENCE Toutes les enceintes de série AE sont disponibles en différentes versions pour s’adapter aux décors d’intérieur et d’extérieur. Tous les modèles existent en finition noire ou blanche (référence se terminant par WH) ou en version brute, prêts à peindre (référence se terminant par UF). Par ailleurs, pour la plupart des environnements extérieurs, l’option de base de résistance à l’humidité est indiquée en fin de référence par WRC. Pour les cas extrêmes, la finition WRX pourra être proposée. Caractéristiques Techniques: * Type: 2 voies Moyenne puissance * Réponse en fréquence: 43 Hz - 18 kHz (± 3 dB) * Dispersion: 60° x 60° * Puissance (AES/Programme/Crête): * BF: 300W/600W/1200W * HF: 35W/75W/150W * SPL Max: * BF: 122 dB * HF: 129 dB * MODE PASSIF: 121 dB * Sensibilité (1W/1M): 96 dB (passif) * Modes de crossover: Bi-amp/Passif * Suspension: 15 points * Dimensions (h x l x p): 711 x 369 x 458 mm * Poids: 20,2 kg JBL - AM5212/66 Reference: AM5212/66 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer More info JBL - AM5212/66 - 2-way, full-range loudspeaker The AM5212/66 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern: 60° x 60° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 122 dB * HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D in vertical cabinet orientation) 713 x 371 x 458 mm (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 JBL - AM5212/66 Referencia: AM5212/66 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Más JBL - AM5212/66 - 2-way, full-range loudspeaker The AM5212/66 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern: 60° x 60° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 122 dB * HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D in vertical cabinet orientation) 713 x 371 x 458 mm (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 JBL - AM5212/66 Artikel-Nr: AM5212/66 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Produktinfos JBL - AM5212/66 - 2-way, full-range loudspeaker The AM5212/66 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern: 60° x 60° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 122 dB * HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D in vertical cabinet orientation) 713 x 371 x 458 mm (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 JBL - AM5212/66 Riferimento: AM5212/66 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Dettagli JBL - AM5212/66 - 2-way, full-range loudspeaker The AM5212/66 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern: 60° x 60° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 122 dB * HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D in vertical cabinet orientation) 713 x 371 x 458 mm (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 Global Audio Store, Revendeur JBL agréé Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer

Change your language: Change your language: Change your language: Change your language: Change your language: Global-Audio-Store STUDIO - HOME STUDIO INSTRUMENT INFORMATIQUE MUSICALE LOGICIEL MAO ESPACE DJ ESPACE GUITARE ESPACE FLIGHT-CASE TRAITEMENT ACOUSTIQUE SONORISATION CÂBLES AUDIO ACCESSOIRES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES JBL - AM5215/26 Référence: AM5215/26 1 890,00 € Disponibilité:  Disponible sur commande Livraison:  Nous contacter pour vérifier la disponibilité et de délai Garantie: 4 ans pièces & main-d'oeuvre En Savoir Plus JBL - AM5215/26 - Enceinte 2 voies Les enceintes de la série AE (Application Engineered) sont conçues pour répondre à une large variété d’applications dans le domaine de l’installation fixe: conservatoires, théâtres, auditoriums, lieux de culte, discothèques, parcs à thèmes, etc... Certains modèles peuvent être utilisés sans complément de basses dans des applications classiques de renforcement sonore et de rappel acoustique. Certains autres, plus petits, sont parfaits pour la sonorisation de hall de type bibliothèque ou amphithéâtre, ainsi que tout rappel acoustique de système de sonorisation de grande taille. DIVERSITE DE SYSTEMES Les modèles de la série AE comportent une grande diversité de taille et de type d’enceintes pour proposer une solution totalement adaptée à vos installations. La série 7000 regroupe les modèles les plus puissants, puis la série 5000 et enfin la série 2000 pour les puissances moins importantes. GUIDE D’ONDE Les enceintes de la gamme AE sont optimisées pour un contrôle parfait de la directivité grâce à leur guide d’onde utilisant la technologie Progressive Transition. Dans la plupart des modèles, les guides d’onde peuvent être tournés de 90°, afin d’offrir une directivité inversée ou permettre l’utilisation de l’enceinte dans une position différente. FILTRAGE SOPHISTIQUE Les modèles de la série AE utilisent des filtres sophistiqués pour un meilleur respect de la qualité audio. Ces filtres du 4éme ordre (24dB/octave) permettent notamment de contribuer à mieux restituer le signal audio tout en diminuant les effets de bord sur les fréquences adjacentes. La plupart des enceintes AE comportent également des modes de filtrages commutables: tri-amp/bi-amp ou bi-amp/passif UNE GRANDE POLYVALENCE Toutes les enceintes de série AE sont disponibles en différentes versions pour s’adapter aux décors d’intérieur et d’extérieur. Tous les modèles existent en finition noire ou blanche (référence se terminant par WH) ou en version brute, prêts à peindre (référence se terminant par UF). Par ailleurs, pour la plupart des environnements extérieurs, l’option de base de résistance à l’humidité est indiquée en fin de référence par WRC. Pour les cas extrêmes, la finition WRX pourra être proposée. Caractéristiques Techniques: * Type: 2 voies Moyenne puissance * Réponse en fréquence: * 41 Hz - 18 kHz (± 3 dB) * Dispersion: 120° x 60° * Puissance (AES/Programme/Crête): * BF: 350W/700W/1400W * HF: 35W/75W/150W * SPL Max: * BF: 125 dB * HF: 129 dB * MODE PASSIF: 124 dB * Sensibilité (1W/1M): 96 dB (passif) * Modes de crossover: Bi-amp/Passif * Suspension: 15 points * Dimensions (h x l x p): 781 x 420 x 503 * Poids: 25 kg JBL - AM5215/26 Reference: AM5215/26 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer More info JBL - AM5215/26 - 2-Way Loudspeaker System The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB): 35 Hz - 20 kHz * Frequency Response (±3 dB): 41 Hz – 18 kHz * Coverage Pattern: 26: 120° x 60° * Directivity Factor (Q): 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes: Bi-amp/Passive switchable * Passive Crossover Frequency: 2 kHz * Transducer Power Rating (AES): * LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL: Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m): Passive mode: 98 dB SPL * Low Frequency: Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m, within operational band): 99 dB SPL * High Frequency Driver: JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m): 115 dB SPL * Waveguide: PT-H66HF-1 * Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish: Black DuraFlex™ finish. White available upon request. * Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in vertical cabinet orientation): 783 x 422 x 504 mm (30.8 x 16.6 x 19.85 in) * Net Weight: 25.0 kg (55 lb) * Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 JBL - AM5215/26 Referencia: AM5215/26 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Más JBL - AM5215/26 - 2-Way Loudspeaker System The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB): 35 Hz - 20 kHz * Frequency Response (±3 dB): 41 Hz – 18 kHz * Coverage Pattern: 26: 120° x 60° * Directivity Factor (Q): 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes: Bi-amp/Passive switchable * Passive Crossover Frequency: 2 kHz * Transducer Power Rating (AES): * LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL: Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m): Passive mode: 98 dB SPL * Low Frequency: Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m, within operational band): 99 dB SPL * High Frequency Driver: JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m): 115 dB SPL * Waveguide: PT-H66HF-1 * Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish: Black DuraFlex™ finish. White available upon request. * Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in vertical cabinet orientation): 783 x 422 x 504 mm (30.8 x 16.6 x 19.85 in) * Net Weight: 25.0 kg (55 lb) * Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 JBL - AM5215/26 Artikel-Nr: AM5215/26 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Produktinfos JBL - AM5215/26 - 2-Way Loudspeaker System The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB): 35 Hz - 20 kHz * Frequency Response (±3 dB): 41 Hz – 18 kHz * Coverage Pattern: 26: 120° x 60° * Directivity Factor (Q): 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes: Bi-amp/Passive switchable * Passive Crossover Frequency: 2 kHz * Transducer Power Rating (AES): * LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL: Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m): Passive mode: 98 dB SPL * Low Frequency: Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m, within operational band): 99 dB SPL * High Frequency Driver: JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m): 115 dB SPL * Waveguide: PT-H66HF-1 * Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish: Black DuraFlex™ finish. White available upon request. * Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in vertical cabinet orientation): 783 x 422 x 504 mm (30.8 x 16.6 x 19.85 in) * Net Weight: 25.0 kg (55 lb) * Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 JBL - AM5215/26 Riferimento: AM5215/26 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Dettagli JBL - AM5215/26 - 2-Way Loudspeaker System The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB): 35 Hz - 20 kHz * Frequency Response (±3 dB): 41 Hz – 18 kHz * Coverage Pattern: 26: 120° x 60° * Directivity Factor (Q): 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes: Bi-amp/Passive switchable * Passive Crossover Frequency: 2 kHz * Transducer Power Rating (AES): * LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL: Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m): Passive mode: 98 dB SPL * Low Frequency: Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m, within operational band): 99 dB SPL * High Frequency Driver: JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance: 8 ohms * Sensitivity (1W @ 1m): 115 dB SPL * Waveguide: PT-H66HF-1 * Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish: Black DuraFlex™ finish. White available upon request. * Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in vertical cabinet orientation): 783 x 422 x 504 mm (30.8 x 16.6 x 19.85 in) * Net Weight: 25.0 kg (55 lb) * Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 Global Audio Store, Revendeur JBL agréé Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer

Change your language: Change your language: Change your language: Change your language: Change your language: Global-Audio-Store STUDIO - HOME STUDIO INSTRUMENT INFORMATIQUE MUSICALE LOGICIEL MAO ESPACE DJ ESPACE GUITARE ESPACE FLIGHT-CASE TRAITEMENT ACOUSTIQUE SONORISATION CÂBLES AUDIO ACCESSOIRES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES JBL - AM5212/26 Référence: AM5212/26 1 790,00 € Disponibilité:  Disponible sur commande Livraison:  Nous contacter pour vérifier la disponibilité et de délai Garantie: 4 ans pièces & main-d'oeuvre En Savoir Plus JBL - AM5212/26 - Enceinte 2 voies Les enceintes de la série AE (Application Engineered) sont conçues pour répondre à une large variété d’applications dans le domaine de l’installation fixe: conservatoires, théâtres, auditoriums, lieux de culte, discothèques, parcs à thèmes, etc... Certains modèles peuvent être utilisés sans complément de basses dans des applications classiques de renforcement sonore et de rappel acoustique. Certains autres, plus petits, sont parfaits pour la sonorisation de hall de type bibliothèque ou amphithéâtre, ainsi que tout rappel acoustique de système de sonorisation de grande taille. DIVERSITE DE SYSTEMES Les modèles de la série AE comportent une grande diversité de taille et de type d’enceintes pour proposer une solution totalement adaptée à vos installations. La série 7000 regroupe les modèles les plus puissants, puis la série 5000 et enfin la série 2000 pour les puissances moins importantes. GUIDE D’ONDE Les enceintes de la gamme AE sont optimisées pour un contrôle parfait de la directivité grâce à leur guide d’onde utilisant la technologie Progressive Transition. Dans la plupart des modèles, les guides d’onde peuvent être tournés de 90°, afin d’offrir une directivité inversée ou permettre l’utilisation de l’enceinte dans une position différente. FILTRAGE SOPHISTIQUE Les modèles de la série AE utilisent des filtres sophistiqués pour un meilleur respect de la qualité audio. Ces filtres du 4éme ordre (24dB/octave) permettent notamment de contribuer à mieux restituer le signal audio tout en diminuant les effets de bord sur les fréquences adjacentes. La plupart des enceintes AE comportent également des modes de filtrages commutables: tri-amp/bi-amp ou bi-amp/passif UNE GRANDE POLYVALENCE Toutes les enceintes de série AE sont disponibles en différentes versions pour s’adapter aux décors d’intérieur et d’extérieur. Tous les modèles existent en finition noire ou blanche (référence se terminant par WH) ou en version brute, prêts à peindre (référence se terminant par UF). Par ailleurs, pour la plupart des environnements extérieurs, l’option de base de résistance à l’humidité est indiquée en fin de référence par WRC. Pour les cas extrêmes, la finition WRX pourra être proposée. Caractéristiques Techniques: * Type: 2 voies Moyenne puissance * Réponse en fréquence: 43 Hz - 18 kHz (± 3 dB) * Dispersion: 120° x 60° * Puissance (AES/Programme/Crête): * BF: 300W/600W/1200W * HF: 35W/75W/150W * SPL Max: * BF: 122 dB * HF: 129 dB * MODE PASSIF: 121 dB * Sensibilité (1W/1M): 96 dB (passif) * Modes de crossover: Bi-amp/Passif * Suspension: 15 points * Dimensions (h x l x p): 711 x 369 x 458 mm * Poids: 20,2 kg JBL - AM5212/26 Reference: AM5212/26 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer More info JBL - AM5212/26 - 2-way, full-range loudspeaker system The AM5212/26 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern: 120° x 60° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) * LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 122 dB * HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D invertical cabinet orientation) 713 x 371 x 458 mm (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 JBL - AM5212/26 Referencia: AM5212/26 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Más JBL - AM5212/26 - 2-way, full-range loudspeaker system The AM5212/26 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern: 120° x 60° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) * LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 122 dB * HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D invertical cabinet orientation) 713 x 371 x 458 mm (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 JBL - AM5212/26 Artikel-Nr: AM5212/26 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Produktinfos JBL - AM5212/26 - 2-way, full-range loudspeaker system The AM5212/26 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern: 120° x 60° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) * LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 122 dB * HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D invertical cabinet orientation) 713 x 371 x 458 mm (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 JBL - AM5212/26 Riferimento: AM5212/26 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Dettagli JBL - AM5212/26 - 2-way, full-range loudspeaker system The AM5212/26 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern: 120° x 60° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) * LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 122 dB * HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D invertical cabinet orientation) 713 x 371 x 458 mm (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 Global Audio Store, Revendeur JBL agréé Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer

Change your language: Change your language: Change your language: Change your language: Change your language: Global-Audio-Store STUDIO - HOME STUDIO INSTRUMENT INFORMATIQUE MUSICALE LOGICIEL MAO ESPACE DJ ESPACE GUITARE ESPACE FLIGHT-CASE TRAITEMENT ACOUSTIQUE SONORISATION CÂBLES AUDIO ACCESSOIRES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES JBL - AM5212/64 Référence: AM5212/64 1 790,00 € Disponibilité:  Disponible sur commande Livraison:  Nous contacter pour vérifier la disponibilité et de délai Garantie: 4 ans pièces & main-d'oeuvre En Savoir Plus JBL - AM5212/64 - Enceinte 2 voies Les enceintes de la série AE (Application Engineered) sont conçues pour répondre à une large variété d’applications dans le domaine de l’installation fixe: conservatoires, théâtres, auditoriums, lieux de culte, discothèques, parcs à thèmes, etc... Certains modèles peuvent être utilisés sans complément de basses dans des applications classiques de renforcement sonore et de rappel acoustique. Certains autres, plus petits, sont parfaits pour la sonorisation de hall de type bibliothèque ou amphithéâtre, ainsi que tout rappel acoustique de système de sonorisation de grande taille. DIVERSITE DE SYSTEMES Les modèles de la série AE comportent une grande diversité de taille et de type d’enceintes pour proposer une solution totalement adaptée à vos installations. La série 7000 regroupe les modèles les plus puissants, puis la série 5000 et enfin la série 2000 pour les puissances moins importantes. GUIDE D’ONDE Les enceintes de la gamme AE sont optimisées pour un contrôle parfait de la directivité grâce à leur guide d’onde utilisant la technologie Progressive Transition. Dans la plupart des modèles, les guides d’onde peuvent être tournés de 90°, afin d’offrir une directivité inversée ou permettre l’utilisation de l’enceinte dans une position différente. FILTRAGE SOPHISTIQUE Les modèles de la série AE utilisent des filtres sophistiqués pour un meilleur respect de la qualité audio. Ces filtres du 4éme ordre (24dB/octave) permettent notamment de contribuer à mieux restituer le signal audio tout en diminuant les effets de bord sur les fréquences adjacentes. La plupart des enceintes AE comportent également des modes de filtrages commutables: tri-amp/bi-amp ou bi-amp/passif UNE GRANDE POLYVALENCE Toutes les enceintes de série AE sont disponibles en différentes versions pour s’adapter aux décors d’intérieur et d’extérieur. Tous les modèles existent en finition noire ou blanche (référence se terminant par WH) ou en version brute, prêts à peindre (référence se terminant par UF). Par ailleurs, pour la plupart des environnements extérieurs, l’option de base de résistance à l’humidité est indiquée en fin de référence par WRC. Pour les cas extrêmes, la finition WRX pourra être proposée. Caractéristiques Techniques: * Type: 2 voies Moyenne puissance * Réponse en fréquence: 43 Hz - 18 kHz (± 3 dB) * Dispersion: 60° x 40° * Puissance (AES/Programme/Crête): * BF: 300W/600W/1200W * HF: 35W/75W/150W * SPL Max: * BF: 122 dB * HF: 129 dB * MODE PASSIF: 121 dB * Sensibilité (1W/1M): 96 dB (passif) * Modes de crossover: Bi-amp/Passif * Suspension: 15 points * Dimensions (h x l x p): 711 x 369 x 458 mm * Poids: 20,2 kg JBL - AM5212/64 Reference: AM5212/64 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer More info JBL - AM5212/64 - 2-way, full-range loudspeaker The AM5212/64 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern 64: 60° x 40° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) * LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL * Bi-amp mode: LF: 122 dB HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D in vertical cabinet orientation) * 713 x 371 x 458 mm * (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 JBL - AM5212/64 Referencia: AM5212/64 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Más JBL - AM5212/64 - 2-way, full-range loudspeaker The AM5212/64 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern 64: 60° x 40° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) * LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL * Bi-amp mode: LF: 122 dB HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D in vertical cabinet orientation) * 713 x 371 x 458 mm * (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 JBL - AM5212/64 Artikel-Nr: AM5212/64 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Produktinfos JBL - AM5212/64 - 2-way, full-range loudspeaker The AM5212/64 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern 64: 60° x 40° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) * LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL * Bi-amp mode: LF: 122 dB HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D in vertical cabinet orientation) * 713 x 371 x 458 mm * (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 JBL - AM5212/64 Riferimento: AM5212/64 1 790,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Dettagli JBL - AM5212/64 - 2-way, full-range loudspeaker The AM5212/64 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 262H-1 300 mm (12 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent 60° x 40° coverage. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 60° x 40° Coverage * 262H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 37 Hz – 20 kHz * Frequency Response (±3 dB) 43 Hz – 18 kHz * Coverage Pattern 64: 60° x 40° * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 1.5 kHz * Transducer Power Rating (AES) * LF: 400 W (1600 W peak), 2 hrs * 300 W (1200 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 300 W (1200 W peak), 100 hrs * Maximum SPL * Bi-amp mode: LF: 122 dB HF: 131 dB * System Sensitivity (1W @ 1m) Passive mode: 115 dB SPL * Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 97 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 113 dB SPL * Waveguide PT-H126HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529 * Dimensions (H x W x D in vertical cabinet orientation) * 713 x 371 x 458 mm * (28.06 x 14.6 x 18.1 in) * Net Weight 20.2 kg (45 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3 Global Audio Store, Revendeur JBL agréé Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer

Change your language: Change your language: Change your language: Change your language: Change your language: Global-Audio-Store STUDIO - HOME STUDIO INSTRUMENT INFORMATIQUE MUSICALE LOGICIEL MAO ESPACE DJ ESPACE GUITARE ESPACE FLIGHT-CASE TRAITEMENT ACOUSTIQUE SONORISATION CÂBLES AUDIO ACCESSOIRES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES JBL - AM5215/66 Référence: AM5215/66 1 890,00 € Disponibilité:  Disponible sur commande Livraison:  Nous contacter pour vérifier la disponibilité et de délai Garantie: 4 ans pièces & main-d'oeuvre En Savoir Plus JBL - AM5215/66 - Enceinte 2 voies Les enceintes de la série AE (Application Engineered) sont conçues pour répondre à une large variété d’applications dans le domaine de l’installation fixe: conservatoires, théâtres, auditoriums, lieux de culte, discothèques, parcs à thèmes, etc... Certains modèles peuvent être utilisés sans complément de basses dans des applications classiques de renforcement sonore et de rappel acoustique. Certains autres, plus petits, sont parfaits pour la sonorisation de hall de type bibliothèque ou amphithéâtre, ainsi que tout rappel acoustique de système de sonorisation de grande taille. DIVERSITE DE SYSTEMES Les modèles de la série AE comportent une grande diversité de taille et de type d’enceintes pour proposer une solution totalement adaptée à vos installations. La série 7000 regroupe les modèles les plus puissants, puis la série 5000 et enfin la série 2000 pour les puissances moins importantes. GUIDE D’ONDE Les enceintes de la gamme AE sont optimisées pour un contrôle parfait de la directivité grâce à leur guide d’onde utilisant la technologie Progressive Transition. Dans la plupart des modèles, les guides d’onde peuvent être tournés de 90°, afin d’offrir une directivité inversée ou permettre l’utilisation de l’enceinte dans une position différente. FILTRAGE SOPHISTIQUE Les modèles de la série AE utilisent des filtres sophistiqués pour un meilleur respect de la qualité audio. Ces filtres du 4éme ordre (24dB/octave) permettent notamment de contribuer à mieux restituer le signal audio tout en diminuant les effets de bord sur les fréquences adjacentes. La plupart des enceintes AE comportent également des modes de filtrages commutables: tri-amp/bi-amp ou bi-amp/passif UNE GRANDE POLYVALENCE Toutes les enceintes de série AE sont disponibles en différentes versions pour s’adapter aux décors d’intérieur et d’extérieur. Tous les modèles existent en finition noire ou blanche (référence se terminant par WH) ou en version brute, prêts à peindre (référence se terminant par UF). Par ailleurs, pour la plupart des environnements extérieurs, l’option de base de résistance à l’humidité est indiquée en fin de référence par WRC. Pour les cas extrêmes, la finition WRX pourra être proposée. Caractéristiques Techniques: * Type: 2 voies Moyenne puissance * Réponse en fréquence: * 41 Hz - 18 kHz (± 3 dB) * Dispersion: 60° x 60° * Puissance (AES/Programme/Crête): * BF: 350W/700W/1400W * HF: 35W/75W/150W * SPL Max: * BF: 125 dB * HF: 129 dB * MODE PASSIF: 124 dB * Sensibilité (1W/1M): 96 dB (passif) * Modes de crossover: Bi-amp/Passif * Suspension: 15 points * Dimensions (h x l x p): 781 x 420 x 503 * Poids: 25 kg JBL - AM5215/66 Reference: AM5215/66 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer More info JBL - AM5215/66 The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 35 Hz - 20 kHz * Frequency Response (±3 dB) 41 Hz – 18 kHz * Coverage Pattern: 60° x 60° * Directivity Factor (Q) 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 2 kHz * Transducer Power Rating (AES) LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m) Passive mode: 98 dB SPL * Low Frequency Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 99 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 115 dB SPL * Waveguide PT-H66HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in * vertical cabinet orientation) 783 x 422 x 504 mm * (30.8 x 16.6 x 19.85 in) * Net Weight 25.0 kg (55 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 JBL - AM5215/66 Referencia: AM5215/66 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Más JBL - AM5215/66 The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 35 Hz - 20 kHz * Frequency Response (±3 dB) 41 Hz – 18 kHz * Coverage Pattern: 60° x 60° * Directivity Factor (Q) 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 2 kHz * Transducer Power Rating (AES) LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m) Passive mode: 98 dB SPL * Low Frequency Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 99 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 115 dB SPL * Waveguide PT-H66HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in * vertical cabinet orientation) 783 x 422 x 504 mm * (30.8 x 16.6 x 19.85 in) * Net Weight 25.0 kg (55 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 JBL - AM5215/66 Artikel-Nr: AM5215/66 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Produktinfos JBL - AM5215/66 The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 35 Hz - 20 kHz * Frequency Response (±3 dB) 41 Hz – 18 kHz * Coverage Pattern: 60° x 60° * Directivity Factor (Q) 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 2 kHz * Transducer Power Rating (AES) LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m) Passive mode: 98 dB SPL * Low Frequency Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 99 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 115 dB SPL * Waveguide PT-H66HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in * vertical cabinet orientation) 783 x 422 x 504 mm * (30.8 x 16.6 x 19.85 in) * Net Weight 25.0 kg (55 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 JBL - AM5215/66 Riferimento: AM5215/66 1 890,00 € Availability:  Available on request Processing time:  Contact us to check the product availability and delivery times Guaranty: 4 years by manufacturer Dettagli JBL - AM5215/66 The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive® dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PT™ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability. Features: * 265H-1 Differential Drive® Low-Frequency Driver * 2408H-1 High-Frequency Compression Driver * Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion * Rotatable waveguide for vertical or horizontal orientation * Bi-Amp/Passive Switchable * Available in Black, White and WRC/WRX weather resistant finishes Applications: * Performing Arts Facilities * Theatrical Sound Design * Auditoriums * Worship Facilities * Live Clubs * Dance Clubs * Sports Facilities * Themed Entertainment Venues Specifications: * Frequency Range (-10 dB) 35 Hz - 20 kHz * Frequency Response (±3 dB) 41 Hz – 18 kHz * Coverage Pattern: 60° x 60° * Directivity Factor (Q) 14.5 * Directivity Index (DI): 11.6 dB * Crossover Modes Bi-amp/Passive switchable * Passive Crossover Frequency 2 kHz * Transducer Power Rating (AES) LF: 500 W (2000 W peak), 2 hrs * 350 W (1400 W peak), 100 hrs * HF: 40 W (160 W peak), 2 hrs * Long-Term System Power Rating (IEC) Passive mode: 350 W (1400 W peak), 100 hrs * Maximum SPL Bi-amp mode: * LF: 125 dB-SPL cont avg * HF: 131 dB-SPL cont avg. * System Sensitivity (1W @ 1m) Passive mode: 98 dB SPL * Low Frequency Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m, within operational band) 99 dB SPL * High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil * Nominal Impedance 8 ohms * Sensitivity (1W @ 1m) 115 dB SPL * Waveguide PT-H66HF-1 * Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood * Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware * Finish Black DuraFlex™ finish. White available upon request. * Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. * Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. * Environmental Specifications Mil-Std 810; IP-x3 per IEC529. * Dimensions (H x W x D in * vertical cabinet orientation) 783 x 422 x 504 mm * (30.8 x 16.6 x 19.85 in) * Net Weight 25.0 kg (55 lb) * Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 Global Audio Store, Revendeur JBL agréé Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer Global Audio Store, Authorized JBL Dealer

Change your language: Change your language: Change your language: Change your language: Change your language: Global-Audio-Store STUDIO - HOME STUDIO INSTRUMENT INFORMATIQUE MUSICALE LOGICIEL MAO ESPACE DJ ESPACE GUITARE ESPACE FLIGHT-CASE TRAITEMENT ACOUSTIQUE SONORISATION CÂBLES AUDIO ACCESSOIRES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES STUDIO - HOME STUDIO INSTRUMENT COMPUTER MUSIC SOFTWARE DJ SPACE GUITAR SPACE FLIGHT-CASE SPACE ACOUSTIC TREATMENT LIVE SOUND AUDIO CABLES ACCESSORIES FOCAL - CMS 40 Référence: CMS 40 389,00 € Disponibilité:  Article en stock Livraison:  Sous 24/48 heures Garantie: 2 ans pièces & main-d'oeuvre En Savoir Plus FOCAL - CMS 40 - Enceinte de Monitoring UNE INTÉGRATION ACOUSTIQUE OPTIMALE La CMS 40 est l’enceinte de monitoring la plus compacte et la plus abordable de la gamme Focal Professional. Son rapport taille/étendue de la réponse en fréquence dans le grave assure une excellente polyvalence. Elle garantit un voicing ultra réaliste, tout en offrant une intégration acoustique optimale dans une petite pièce. Son design permet une écoute dès 40 cm, même dans les configurations les plus défavorables. La CMS 40 est l’outil idéal pour les home studios et la post-production. Elle trouvera également sa place dans les plus gros studios comme second système de monitoring. UNE PRÉCISION ET UNE NEUTRALITÉ INÉGALÉES de la CMS 40 traduit le savoir-faire Focal en matière de développement et de fabrication de haut-parleurs et d’enceintes acoustiques. La scène sonore est large, profonde et précise pour un contrôle total du travail effectué. La dynamique d’ensemble offre un total contrôle de la compression du signal. L’intelligibilité des transitoires assure la retranscription de la totalité des micro-informations. Enfin, la neutralité et l’équilibre tonal garantissent une qualité de transfert remarquable. DES TECHNOLOGIES FOCAL GAGES DE QUALITÉ La CMS 40 est un concentré de technologies Focal 100% Made in France, à l’image du tweeter à dôme inversé en aluminium/ magnésium et du woofer à membrane Polyglass, toutes deux gages de neutralité, dynamique, détail, largeur et précision de scène sonore. La R&D Focal a également opté pour une bi-amplification, 2 x 25W rms classe AB, alliant faible distorsion et dynamique. Enfin, la CMS 40 propose de nombreux réglages pour répondre aux contraintes acoustiques des salles de contrôle de petite taille. Spécifications: * Réponse en fréquence (+/-3 dB): 60 Hz - 28 kHz * Niveau SPL Maximum: 97 dB SPL (pic @ 1 m) Section Electronique: * Type/Impédance: Symétrique 10 kOhms / asymétrique 47 kOhms * Connecteurs: XLR/RCA * Amplificateur hautes fréquences: 25 W rms, classe AB * Amplificateur médium et basses: 25 W rms, classe AB Alimentation électrique: * Tensions: 220-230 V (fusible 0,5 A) * 120 V (fusible 0,8 A) * 100 V (fusible 1 A) * Connexion: Fiche IEC et cordon d’alimentation amovible Réglages: * Sensibilité: Ajustable, +4dBu / 0 / -10 dBV * Volume: Ajustable, -66 dB / 0 dB * Niveau médium/grave (0 - 450 Hz): Ajustable, 0 /-2 / +2 dB * Niveau d’aigu (4,5 kHz - 20 kHz): Ajustable, 0 /-2 / +2 dB * Commutateur marche/arrêt Visualisation et contrôles: * DEL de mise sous et hors tension * DEL de clip audio * Woofer: Focal 10 cm, membrane Polyglass * Tweeter: Focal à dôme inversé en aluminium/magnésium * Blindage: Intégral par construction magnétique * Construction: Aluminium renforcé et amorti Finition: * Peinture poudrée noire * Dimensions avec plots: 238 x 156 x 155 mm * Dimensions avec semelle: 243,2 x 156 x 155 mm * Poids: 5,5 kg Accessoires fournis: * 1 x tapis de découplage acoustique * 2 x pointes réglables en hauteur * 4 x plots caoutchouc * 1 x pièce d'optimisation de phase FOCAL - CMS 40 Reference: CMS 40 389,00 € Availability:  Available in stock Processing time:  Under 24/48 hours Guaranty: 2 years by manufacturer More info FOCAL - CMS 40 - Studio Monitor The Focal CMS 40 (Single) is the most compact monitor of the Focal Professional range. Its size/extended bass frequency ratio ensures excellent versatility. This monitor guarantees ultra-realistic voicing, whilst offering optimum acoustic integration in a small room. Its design permits a listening position from 16" (40cm), even in the least advantageous locations (ex. proximity to reverberating surfaces). The Focal CMS 40 is the perfect tool for post-production and home studios. And even in the biggest and best studios, it proves to be an excellent second monitoring system, allowing one to quickly check how the mix translates onto smaller speakers. The Focal CMS 40 Features: * Frequency response (+/-3dB): 60Hz - 28kHz * Maximum SPL: 97dB SPL (peak @ 1m) * Input Type/Impedance: Balanced 10 kOhms/Unbalanced 47 kOhms * Connectors: XLR/RCA * HF amplifier stage: 25W RMS (Class AB) * LF amplifier stage: 25W RMS (Class AB) Electric supply: * Mains voltage: 220-230V (0.5A fuse) * 120V (0.8A fuse) * 100V (1A fuse) * Connection: IEC inlet and detachable power cord Adjustment: * Sensitivity: Adjustable, +4dBu / 0 / -10dBV * Volume: Adjustable, -66dB / 0dB * LF shelving (0-450Hz): Adjustable, 0 / -2 / +2dB * HF shelving (4.5kHz - 20kHz): Adjustable, 0 / -2 / +2dB * Power ON/OFF switch * Indicators: Power ON/OFF LED - Audio clip LED * Woofer: 4" Focal drive unit, Poly-glass cone * Tweeter: Aluminium/Magnesium inverted dome Focal tweeter * Shielding: Integral by compensation magnet * Construction: Reinforced and damped die cast Aluminium cabinet * Finish: Black powdered paint * Dimensions with spikes: 9-3/8 x 6-1/8 x 6-1/8" (238 x 156 x 155mm) * Dimensions with table stand: 9-9/16 x 6-1/8 x 6-1/8" (243.2 x 156 x 155mm) * Net weight: 11lb (5.5kg) FOCAL - CMS 40 Referencia: CMS 40 389,00 € Availability:  Available in stock Processing time:  Under 24/48 hours Guaranty: 2 years by manufacturer Más FOCAL - CMS 40 - Studio Monitor The Focal CMS 40 (Single) is the most compact monitor of the Focal Professional range. Its size/extended bass frequency ratio ensures excellent versatility. This monitor guarantees ultra-realistic voicing, whilst offering optimum acoustic integration in a small room. Its design permits a listening position from 16" (40cm), even in the least advantageous locations (ex. proximity to reverberating surfaces). The Focal CMS 40 is the perfect tool for post-production and home studios. And even in the biggest and best studios, it proves to be an excellent second monitoring system, allowing one to quickly check how the mix translates onto smaller speakers. The Focal CMS 40 Features: * Frequency response (+/-3dB): 60Hz - 28kHz * Maximum SPL: 97dB SPL (peak @ 1m) * Input Type/Impedance: Balanced 10 kOhms/Unbalanced 47 kOhms * Connectors: XLR/RCA * HF amplifier stage: 25W RMS (Class AB) * LF amplifier stage: 25W RMS (Class AB) Electric supply: * Mains voltage: 220-230V (0.5A fuse) * 120V (0.8A fuse) * 100V (1A fuse) * Connection: IEC inlet and detachable power cord Adjustment: * Sensitivity: Adjustable, +4dBu / 0 / -10dBV * Volume: Adjustable, -66dB / 0dB * LF shelving (0-450Hz): Adjustable, 0 / -2 / +2dB * HF shelving (4.5kHz - 20kHz): Adjustable, 0 / -2 / +2dB * Power ON/OFF switch * Indicators: Power ON/OFF LED - Audio clip LED * Woofer: 4" Focal drive unit, Poly-glass cone * Tweeter: Aluminium/Magnesium inverted dome Focal tweeter * Shielding: Integral by compensation magnet * Construction: Reinforced and damped die cast Aluminium cabinet * Finish: Black powdered paint * Dimensions with spikes: 9-3/8 x 6-1/8 x 6-1/8" (238 x 156 x 155mm) * Dimensions with table stand: 9-9/16 x 6-1/8 x 6-1/8" (243.2 x 156 x 155mm) * Net weight: 11lb (5.5kg) FOCAL - CMS 40 Artikel-Nr: CMS 40 389,00 € Availability:  Available in stock Processing time:  Under 24/48 hours Guaranty: 2 years by manufacturer Produktinfos FOCAL - CMS 40 - Studio Monitor The Focal CMS 40 (Single) is the most compact monitor of the Focal Professional range. Its size/extended bass frequency ratio ensures excellent versatility. This monitor guarantees ultra-realistic voicing, whilst offering optimum acoustic integration in a small room. Its design permits a listening position from 16" (40cm), even in the least advantageous locations (ex. proximity to reverberating surfaces). The Focal CMS 40 is the perfect tool for post-production and home studios. And even in the biggest and best studios, it proves to be an excellent second monitoring system, allowing one to quickly check how the mix translates onto smaller speakers. The Focal CMS 40 Features: * Frequency response (+/-3dB): 60Hz - 28kHz * Maximum SPL: 97dB SPL (peak @ 1m) * Input Type/Impedance: Balanced 10 kOhms/Unbalanced 47 kOhms * Connectors: XLR/RCA * HF amplifier stage: 25W RMS (Class AB) * LF amplifier stage: 25W RMS (Class AB) Electric supply: * Mains voltage: 220-230V (0.5A fuse) * 120V (0.8A fuse) * 100V (1A fuse) * Connection: IEC inlet and detachable power cord Adjustment: * Sensitivity: Adjustable, +4dBu / 0 / -10dBV * Volume: Adjustable, -66dB / 0dB * LF shelving (0-450Hz): Adjustable, 0 / -2 / +2dB * HF shelving (4.5kHz - 20kHz): Adjustable, 0 / -2 / +2dB * Power ON/OFF switch * Indicators: Power ON/OFF LED - Audio clip LED * Woofer: 4" Focal drive unit, Poly-glass cone * Tweeter: Aluminium/Magnesium inverted dome Focal tweeter * Shielding: Integral by compensation magnet * Construction: Reinforced and damped die cast Aluminium cabinet * Finish: Black powdered paint * Dimensions with spikes: 9-3/8 x 6-1/8 x 6-1/8" (238 x 156 x 155mm) * Dimensions with table stand: 9-9/16 x 6-1/8 x 6-1/8" (243.2 x 156 x 155mm) * Net weight: 11lb (5.5kg) FOCAL - CMS 40 Riferimento: CMS 40 389,00 € Availability:  Available in stock Processing time:  Under 24/48 hours Guaranty: 2 years by manufacturer Dettagli FOCAL - CMS 40 - Studio Monitor The Focal CMS 40 (Single) is the most compact monitor of the Focal Professional range. Its size/extended bass frequency ratio ensures excellent versatility. This monitor guarantees ultra-realistic voicing, whilst offering optimum acoustic integration in a small room. Its design permits a listening position from 16" (40cm), even in the least advantageous locations (ex. proximity to reverberating surfaces). The Focal CMS 40 is the perfect tool for post-production and home studios. And even in the biggest and best studios, it proves to be an excellent second monitoring system, allowing one to quickly check how the mix translates onto smaller speakers. The Focal CMS 40 Features: * Frequency response (+/-3dB): 60Hz - 28kHz * Maximum SPL: 97dB SPL (peak @ 1m) * Input Type/Impedance: Balanced 10 kOhms/Unbalanced 47 kOhms * Connectors: XLR/RCA * HF amplifier stage: 25W RMS (Class AB) * LF amplifier stage: 25W RMS (Class AB) Electric supply: * Mains voltage: 220-230V (0.5A fuse) * 120V (0.8A fuse) * 100V (1A fuse) * Connection: IEC inlet and detachable power cord Adjustment: * Sensitivity: Adjustable, +4dBu / 0 / -10dBV * Volume: Adjustable, -66dB / 0dB * LF shelving (0-450Hz): Adjustable, 0 / -2 / +2dB * HF shelving (4.5kHz - 20kHz): Adjustable, 0 / -2 / +2dB * Power ON/OFF switch * Indicators: Power ON/OFF LED - Audio clip LED * Woofer: 4" Focal drive unit, Poly-glass cone * Tweeter: Aluminium/Magnesium inverted dome Focal tweeter * Shielding: Integral by compensation magnet * Construction: Reinforced and damped die cast Aluminium cabinet * Finish: Black powdered paint * Dimensions with spikes: 9-3/8 x 6-1/8 x 6-1/8" (238 x 156 x 155mm) * Dimensions with table stand: 9-9/16 x 6-1/8 x 6-1/8" (243.2 x 156 x 155mm) * Net weight: 11lb (5.5kg) Global Audio Store, Revendeur Focal agréé Global Audio Store, Authorized Focal Dealer Global Audio Store, Authorized Focal Dealer Global Audio Store, Authorized Focal Dealer Global Audio Store, Authorized Focal Dealer

Casque jeu filaire casque micro pr PS4 PC téléphone portable dans oreille SH Product features: Metal removable microphone and earphone shell, food-grade silicone earplugs, removable microphone, 10mm dynamic driver, etc. However, it has anti-deformation, damage and destruction, non-toxic, odorless, no discoloration, high-temperature resistance, and other properties. Due to its soft material, it will not hurt your ears after long-term use, the movable microphone is fast and easy to use, and the 10 mm dynamic driver eliminates high, medium and low bass distances, and provides clear, transparent sound and strong sound. Provides rich bass effects. 2. [Dual microphone design]: In addition to the microphone connected to the headphone cable, there is an independent 360° bendable microphone. The microphone has a noise reduction function that allows you to bend it to the best position to suit your needs and maintain good online communication. This microphone can be disassembled, when you are not playing, you can take it off and use it as a normal headset, answer the phone, listen to music, etc. 3. Anti-winding wire design: the use of high-quality TPE wire, with high toughness and strong elasticity, greatly improving the tensile strength of the headset, to prevent damage to the headset due to winding. The removable plug-in microphone is convenient and fast, and the speed of enjoying music and games is fast enough. 4 [Excellent compatibility] Although this headset is designed for PC gaming, it also has the function of supporting ordinary headsets, such as listening to music and making phone calls. 4 kinds of games (COD, Monahan, etc.), smartphone games (field action, PUBG, etc.), and dual microphone design can easily adapt to various situations and needs. It can be used for tablet PC, PC, PS4, iPhone, Samsung, Sony, Xperia, Huawei smartphone, Nintendo Switch, 3DS, Xbox One, Wii U, etc. Note: If you want to use an old Xbox, you need to purchase a special adapter (this product is not included). Product Specifications: Microphone size: Medium 4.0*1.5mm Microphone sensitivity: -42 ± 3dB Directivity: Omnidirectional microphone Microphone impedance: 2.2KQ2 Speaker size: medium 10mm Speaker impedance: 1602 Frequency response range: 20-20000Hz Input power: 3mW Connection cable: about 1.25 meters Pin type: 3.5 4pin Package Contents:  headphone body x1 earplugs x2 removable microphone x1 Y-type headphone conversion adapter cable x1 storage bag x1   Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Product features: Metal removable microphone and earphone shell, food-grade silicone earplugs, removable microphone, 10mm dynamic driver, etc. However, it has anti-deformation, damage and destruction, non-toxic, odorless, no discoloration, high-temperature resistance, and other properties. Due to its soft material, it will not hurt your ears after long-term use, the movable microphone is fast and easy to use, and the 10 mm dynamic driver eliminates high, medium and low bass distances, and provides clear, transparent sound and strong sound. Provides rich bass effects. 2. [Dual microphone design]: In addition to the microphone connected to the headphone cable, there is an independent 360° bendable microphone. The microphone has a noise reduction function that allows you to bend it to the best position to suit your needs and maintain good online communication. This microphone can be disassembled, when you are not playing, you can take it off and use it as a normal headset, answer the phone, listen to music, etc. 3. Anti-winding wire design: the use of high-quality TPE wire, with high toughness and strong elasticity, greatly improving the tensile strength of the headset, to prevent damage to the headset due to winding. The removable plug-in microphone is convenient and fast, and the speed of enjoying music and games is fast enough. 4 [Excellent compatibility] Although this headset is designed for PC gaming, it also has the function of supporting ordinary headsets, such as listening to music and making phone calls. 4 kinds of games (COD, Monahan, etc.), smartphone games (field action, PUBG, etc.), and dual microphone design can easily adapt to various situations and needs. It can be used for tablet PC, PC, PS4, iPhone, Samsung, Sony, Xperia, Huawei smartphone, Nintendo Switch, 3DS, Xbox One, Wii U, etc. Note: If you want to use an old Xbox, you need to purchase a special adapter (this product is not included). Product Specifications: Microphone size: Medium 4.0*1.5mm Microphone sensitivity: -42 ± 3dB Directivity: Omnidirectional microphone Microphone impedance: 2.2KQ2 Speaker size: medium 10mm Speaker impedance: 1602 Frequency response range: 20-20000Hz Input power: 3mW Connection cable: about 1.25 meters Pin type: 3.5 4pin Package Contents:  headphone body x1 earplugs x2 removable microphone x1 Y-type headphone conversion adapter cable x1 storage bag x1 PAYMENT Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. SHIPPING Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. ABOUT US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 08-déc.-20 à 08:16:23 Paris, le vendeur a ajouté les informations suivantes:

Casque jeu filaire casque micro pr PS4 PC téléphone portable dans oreille DE Product features: Metal removable microphone and earphone shell, food-grade silicone earplugs, removable microphone, 10mm dynamic driver, etc. However, it has anti-deformation, damage and destruction, non-toxic, odorless, no discoloration, high-temperature resistance, and other properties. Due to its soft material, it will not hurt your ears after long-term use, the movable microphone is fast and easy to use, and the 10 mm dynamic driver eliminates high, medium and low bass distances, and provides clear, transparent sound and strong sound. Provides rich bass effects. 2. [Dual microphone design]: In addition to the microphone connected to the headphone cable, there is an independent 360° bendable microphone. The microphone has a noise reduction function that allows you to bend it to the best position to suit your needs and maintain good online communication. This microphone can be disassembled, when you are not playing, you can take it off and use it as a normal headset, answer the phone, listen to music, etc. 3. Anti-winding wire design: the use of high-quality TPE wire, with high toughness and strong elasticity, greatly improving the tensile strength of the headset, to prevent damage to the headset due to winding. The removable plug-in microphone is convenient and fast, and the speed of enjoying music and games is fast enough. 4 [Excellent compatibility] Although this headset is designed for PC gaming, it also has the function of supporting ordinary headsets, such as listening to music and making phone calls. 4 kinds of games (COD, Monahan, etc.), smartphone games (field action, PUBG, etc.), and dual microphone design can easily adapt to various situations and needs. It can be used for tablet PC, PC, PS4, iPhone, Samsung, Sony, Xperia, Huawei smartphone, Nintendo Switch, 3DS, Xbox One, Wii U, etc. Note: If you want to use an old Xbox, you need to purchase a special adapter (this product is not included). Product Specifications: Microphone size: Medium 4.0*1.5mm Microphone sensitivity: -42 ± 3dB Directivity: Omnidirectional microphone Microphone impedance: 2.2KQ2 Speaker size: medium 10mm Speaker impedance: 1602 Frequency response range: 20-20000Hz Input power: 3mW Connection cable: about 1.25 meters Pin type: 3.5 4pin Package Contents:  headphone body x1 earplugs x2 removable microphone x1 Y-type headphone conversion adapter cable x1 storage bag x1 Payment Nous n'acceptons que Paypal comme moyen de paiement. L'article sera envoyé dans 24 heures suivant le paiement reçu du lundi au vendredi, et les commandes reçues le samedi et le dimanche seront affichées le lundi suivant. Shipping Nous fournissons des choix multiples pour les méthodes d'expédition et la date d'arrivée estimée, mais veuillez comprendre que nous ne pouvons pas contrôler la condition d'expédition actuelle et la date d'arrivée. Terms of Sale Si vous n'êtes pas satisfait de votre achat, contactez-nous sans hésiter. Les articles peuvent être retournés dans 30 jours en état inutilisé, nous effectuerons un échange et un remboursement une fois que nous aurons reçu l'objet. Gardez les étiquettes entières et les éléments propres sans saveur, si non nous n'accepterons pas le retour. About US Si vous avez des questions, contactez-nous par l'intermédiaire de l'onglet «Demandez-nous un vendeur» au bas de la page d'inscription. Répondre à votre satisfaction est la chose la plus imotante pour nous, nous souhaitons résoudre chaque problème pour vous. Et laissez-nous une note de  5 étoiles  si vous vous sentez heureux de notre produit et service. Le 01-déc.-20 à 10:02:38 Paris, le vendeur a ajouté les informations suivantes: