Position rx cart

Caractéristiques: Fréquence couvertes: 28.145-28.575 MHZ (25.615 à 28.305 MHZ). Puissance de sortie antenne: 15 Watts Classe d'émission: AM (A3E), FM (F3E) HP impédance: 8 ohms, 2 Watts Antenne impédance: 50 Ohms Micro impédance: pastille dynamique Alimentation: 13,8 Volts DC négatif à la masse Dimensions: Longueur 260 x Largeur 60 x Profondeur 200mm Commandes et fonctions: Prise micro 4 broches Afficheur canaux bleu Sélecteur de canaux par rotacteur Bouton RF-GAIN / MIC –GAIN Volume / Squelch Bouton ECHO/TALKBACK: Permet d’ajuster l'écho et le volume désiré du talback. Talback: monitoring d’écoute pour réglage de l’écho Bouton TIME: Permet d’ajuster l’intervalle de l’écho. Décalage + 10 Khz Voyant RX / TX filtres NB / ANL Sélecteur de bandes Voyant ANT: Indicateur d’alarme qui indique un défaut dans votre circuit d’antenne. Power H/M/L: Permet de sélectionner la puissance de sortie RF.10W (HI), 4W (MED), 1W (LOW). Ecran TFT LCD:écran en façade permettant à l'utilisateur de contrôler la force du signal reçu, la puissance de sortie RF, le niveau SWR, d'afficher des photos. Display: Permet de sélectionner les différents types d’affichages qui peuvent être utilisés à l’écran: 12 possibles RX-TX Dimmer: Permet de modifier le niveau de lumière sur l’écran. Bouton Play/Stop: Permet d’allumer ou éteindre le lecteur MP3 Bouton Reverse/retour: Permet de choisir la piste audio ou l’image précédente. Bouton Next/avancer: Permet d’avancer à la piste audio ou l’image suivante. Port SD: Permet de connecter une SD Card pour de la music ou des photos (2 GB de capacité maximum) Port USB:Permet de connecter une clé USB pour de la Music ou des photos. (1 GB de capacité maximum) (clé USB fournie) Ampli supplémentaire audio stéréo 2 x 10 Watts Bouton METER/AUTO/PHOTO: permet de sélectionner la position meter (écran indiquant la modulation, le tos, la puissance RF, la force du signal reçu), la position auto (permet un défilement automatique des photos) et la position photo (permet de voir les photos à l'écran) Bouton MP3/TB/RADIO: Permet de sélectionner le lecteur MP3 / la fonction Talback ou la radio. Sortie AUX: sortie jack stéréo 3.5 mm / 200 Ohms/2 V pour une sortie audio amplifié Prise PA Prises sortie stéréo SP: Right (droite) et Left (gauche) prise acceptant un haut-parleur externe de 4 à 8 ohms, de 5 watts minimum. (ex: option: une paire de HP SS ONE: HP avec ligne de diodes électroluminescentes) Radiateur à l'arrière

  * * * * I send in all Europe and all over the world.   *** Envié toda Europa y en todo el mundo.   ***   Ho mandato in tutta Europa e nel mondo. ***  Enviei toda a Europa e em todo o mundo.     For the purchase of several items  the discount is provided excluding postage: * 2 items = - 5% of the total * 3-5 items = - 10% of the total * 6 items and more = - 15% of the total Feel free to ask me questions in French or English   *  *  *  *  *   * NORMES CE * * * * * * Vends BELLE     CB   CRT   modèle  ULYSSE complète avec accessoires  Cette CB a une  puissance  de 4 ou 8 W en AM/FM (suivant position bouton "Hi-Low") et 40 canaux -  Fréquence de 26,065 à 27,405 MHz (  This CB has a power of 4 or 8 W in AM / FM (according to position "Hi-Low" button) and 40 channels -  Frequency of 26.065 to 27.405 MHz )  ******** Au niveau aspect, elle est encore dans un bon état  (juste une remarque: l'inscription "Squelch" est effacée sur la façade mais la fonction Squelch marche parfaitement, voir photo 2, deuxième bouton en bas et en partant de la gauche),   elle est aussi en bon état de fonctionnement, émission comme réception -     -  At the aspect level, it is still in a good state (just a note: the inscription "Squelch" is erased on the facade but the Squelch function works perfectly, see photo 2,  second button at the bottom and starting from the left) it is also in good working condition, both in transmission and reception -   ****** La CB est livrée avec un micro CRT   en bon état de fonctionnement  (The CB comes with a CRT microphone 4-pin in good working order) + 2 pattes de fixation avec molettes de serrage, +  1 cordon d'alimentation 3 broches avec fusible  +  1 notice d'utilisation standard d'un poste de CB en Français  (  +  2 fixing lugs with locking knobs + 1 3-pin power cord with fuse  + 1 standard operating instructions for a CB machine in French  ) *  *  *  *  * CARACTERISTIQUES  TECHNIQUES :   Bouton Off - Volume   Bouton Squelch   Bouton Micro gain   Bouton Rf gain - pull PA (Public Adress)   Bouton SWR Call   Bouton Sélecteur de Band (Low - Mid - Hi) ou (A - B - C - D - E - F) (sur la version Ulysse Turbo)   Bouton Sélecteur de canaux   Commutateur S/Rf - Swr - Cal (Tos-mètre incorporé)   Commutateur Filtre Nb/Anl - Anl - Off   Commutateur PWR (Low - Hi)   Commutateur Roger Beep ou +10Khz (sur la version Ulysse Turbo)   Commutateur Mode AM/FM   Affichage TX / RX (LED)   Affichage digital du canal   Vu-mètre à aiguille   Prise micro en façade 4 broches   Micro  Nombre de canaux: 40 cx (Version Export Ulysse: 120 cx   Puissance: 4 watts (Version Export Ulysse: 8 watt s)   Prise SO259 pour branchement de l'antenne   Prise jack pour branchement haut parleur extérieur   Prise jack pour branchement PA (Public Adress)   Prise alimentation 3 broches * * * * * PROFITEZ des Frais de l ivraison réduits en ce moment avec MONDIAL RELAY Pour la BELGIQUE et le LUXEMBOURG, les frais d'expédition sont de   7,80 euros avec Assurance par  Mondial Relay avec  retrait du colis dans un point relais prés de chez vous. For BELGIUM and LUXEMBOURG, shipping costs are 7,80 euro with insurance with Mondial Relay with removal of packages in a pick-up point near you. Pour l ?ESPAGNE,  l'ITALIE,  l'ALLEMAGNE,  L'AUTRICHE, Le ROYAUME UNI,  le PORTUGAL, les frais d'expédition sont de 12, 9 0 euros avec assurance par Mondial Relay avec retrait du colis dans un point relais prés de chez vous. For  SPAIN,   ITALY,  t he UNITED KINGDOM,   GERMANY, AUSTRIA   and  PORTUGAL, shipping costs are 12, 9 0 euro with insurance and with Mondial Relay with removal of packages in a pick-up point near you * * * * * (d'autres photos sont disponibles sur simple demande,   envoi rapide en 48h00 maxi aprés réception de votre paiement et   PAYEZ directement avec PAYPAL en utilisant votre compte ou avec une carte bancaire habituelle, site entièrement SECURISE)   NOTA: Les frais demandés sont forfaitaires et comprennent les frais postaux, les frais d'emballage et les divers frais se rapportant à la vente de cet objet. $  $  $  $  $ VOUS TROUVEREZ PEUT ETRE CET ARTICLE UN PEU MOINS CHER AILLEURS, MAIS REGARDEZ BIEN SI ON VOUS PROPOSE LES MEME  GARANTIES SUR  L'ARTICLE ET  LE MEME SERIEUX DE L'EXPEDITION, SUR MON SITE VOUS POUVEZ ACHETEZ EN TOUTE CONFIANCE et si vous achetez 2 articles ou plus je vous offre les frais d'envois du 2ème article et des suivants ? (offre valable en France métropolitaine uniquement) (Offer valid in France only by cons of shipping to EUROPE will be reduced if you buy  multiple items) VOUS POUVEZ VOIR MES NOTATIONS FAITES PAR LES EBAYEURS, ELLES PROUVENT LE SERIEUX ET LA QUALITE DE MES VENTES.   N'hésitez pas à consulter mes autres objets en vente ! ********   (Photos réelles de l'article, pas de surprise vous achetez ce que vous voyez... ) (Photos of actual item, no surprise you buy what you see...)   * * * * *  

  * * * * I send in all Europe and all over the world.   *** Envié toda Europa y en todo el mundo.   ***   Ho mandato in tutta Europa e nel mondo. ***  Enviei toda a Europa e em todo o mundo.     For the purchase of several items  the discount is provided excluding postage: * 2 items = - 5% of the total * 3-5 items = - 10% of the total * 6 items and more = - 15% of the total Feel free to ask me questions in French or English   *  *  *  *  *   * NORMES CE * * * * * * Vends BELLE     CB   CRT   modèle  ULYSSE complète avec accessoires  Cette CB a une  puissance  de 4 ou 8 W en AM/FM (suivant position bouton "Hi-Low") et 40 canaux -  Fréquence de 26,065 à 27,405 MHz (  This CB has a power of 4 or 8 W in AM / FM (according to position "Hi-Low" button) and 40 channels -  Frequency of 26.065 to 27.405 MHz )  ******** Au niveau aspect, elle est encore dans un bon état  (juste une remarque: l'inscription "Squelch" est effacée sur la façade mais la fonction Squelch marche parfaitement, voir photo 2, deuxième bouton en bas et en partant de la gauche),   elle est aussi en bon état de fonctionnement, émission comme réception -     -  At the aspect level, it is still in a good state (just a note: the inscription "Squelch" is erased on the facade but the Squelch function works perfectly, see photo 2,  second button at the bottom and starting from the left) it is also in good working condition, both in transmission and reception -   ****** La CB est livrée avec un micro CRT   en bon état de fonctionnement  (The CB comes with a CRT microphone 4-pin in good working order) + 2 pattes de fixation avec molettes de serrage, +  1 cordon d'alimentation 3 broches avec fusible  +  1 notice d'utilisation standard d'un poste de CB en Français  (  +  2 fixing lugs with locking knobs + 1 3-pin power cord with fuse  + 1 standard operating instructions for a CB machine in French  ) *  *  *  *  * CARACTERISTIQUES  TECHNIQUES :   Bouton Off - Volume   Bouton Squelch   Bouton Micro gain   Bouton Rf gain - pull PA (Public Adress)   Bouton SWR Call   Bouton Sélecteur de Band (Low - Mid - Hi) ou (A - B - C - D - E - F) (sur la version Ulysse Turbo)   Bouton Sélecteur de canaux   Commutateur S/Rf - Swr - Cal (Tos-mètre incorporé)   Commutateur Filtre Nb/Anl - Anl - Off   Commutateur PWR (Low - Hi)   Commutateur Roger Beep ou +10Khz (sur la version Ulysse Turbo)   Commutateur Mode AM/FM   Affichage TX / RX (LED)   Affichage digital du canal   Vu-mètre à aiguille   Prise micro en façade 4 broches   Micro  Nombre de canaux: 40 cx (Version Export Ulysse: 120 cx   Puissance: 4 watts (Version Export Ulysse: 8 watt s)   Prise SO259 pour branchement de l'antenne   Prise jack pour branchement haut parleur extérieur   Prise jack pour branchement PA (Public Adress)   Prise alimentation 3 broches * * * * * PROFITEZ des Frais de l ivraison réduits en ce moment avec MONDIAL RELAY Pour la BELGIQUE et le LUXEMBOURG, les frais d'expédition sont de   7,80 euros avec Assurance par  Mondial Relay avec  retrait du colis dans un point relais prés de chez vous. For BELGIUM and LUXEMBOURG, shipping costs are 7,80 euro with insurance with Mondial Relay with removal of packages in a pick-up point near you. Pour l ?ESPAGNE,  l'ITALIE,  l'ALLEMAGNE,  L'AUTRICHE, Le ROYAUME UNI,  le PORTUGAL, les frais d'expédition sont de 12, 9 0 euros avec assurance par Mondial Relay avec retrait du colis dans un point relais prés de chez vous. For  SPAIN,   ITALY,  t he UNITED KINGDOM,   GERMANY, AUSTRIA   and  PORTUGAL, shipping costs are 12, 9 0 euro with insurance and with Mondial Relay with removal of packages in a pick-up point near you * * * * * (d'autres photos sont disponibles sur simple demande,   envoi rapide en 48h00 maxi aprés réception de votre paiement et   PAYEZ directement avec PAYPAL en utilisant votre compte ou avec une carte bancaire habituelle, site entièrement SECURISE)   NOTA: Les frais demandés sont forfaitaires et comprennent les frais postaux, les frais d'emballage et les divers frais se rapportant à la vente de cet objet. $  $  $  $  $ VOUS TROUVEREZ PEUT ETRE CET ARTICLE UN PEU MOINS CHER AILLEURS, MAIS REGARDEZ BIEN SI ON VOUS PROPOSE LES MEME  GARANTIES SUR  L'ARTICLE ET  LE MEME SERIEUX DE L'EXPEDITION, SUR MON SITE VOUS POUVEZ ACHETEZ EN TOUTE CONFIANCE et si vous achetez 2 articles ou plus je vous offre les frais d'envois du 2ème article et des suivants ? (offre valable en France métropolitaine uniquement) (Offer valid in France only by cons of shipping to EUROPE will be reduced if you buy  multiple items) VOUS POUVEZ VOIR MES NOTATIONS FAITES PAR LES EBAYEURS, ELLES PROUVENT LE SERIEUX ET LA QUALITE DE MES VENTES.   N'hésitez pas à consulter mes autres objets en vente ! ********   (Photos réelles de l'article, pas de surprise vous achetez ce que vous voyez... ) (Photos of actual item, no surprise you buy what you see...)   * * * * *   Le 11-avr.-19 à 14:40:35 Paris, le vendeur a ajouté les informations suivantes: NOTA: je serais absent de mon domicile du lundi 15 avril au mercredi 17 avril, par conséquent tout article acheté pendant  cette période sera traité et expédié après mon retour, en vous remerciant de votre compréhension. * * * * * NOTE: I will be away from my home from Monday, April 15 to Wednesday, April 17, therefore any item purchased during this period   will be processed and shipped after my return, thanking you for your understanding. * * * * *

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 10-juil.-19 à 05:53:17 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 09-juil.-19 à 17:37:11 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 08-juil.-19 à 15:14:31 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 10-août-19 à 10:14:47 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point Le 30-août-19 à 13:44:50 Paris, le vendeur a ajouté les informations suivantes:

1. Introduction   This FM stereo digital radio circuit board module has built-in DSP digital noise processing. When there is no signal, it will automatically mute and get rid of the noise of the traditional FM radio.   2.   Parameter   NO. Parameter Value 1 Output power 500mW (drive earphone), 3Wx2 (drive horn) 2 Frequency range 50Hz-18KHz  3 Receiving frequency range 87.0MHz-108.0MHz 4 Equivalent noise Greater than 30dB 5 Power supply voltage 3.0V-5.0V 6 Power supply current 1000mA at maximum volume, 60mA at minimum volume (for reference only) 7 Sound track Stereo       3. Using attention:   1>. The power supply voltage is strictly prohibited to exceed the power supply voltage range of this module. 2>. Do not touch the back part of the module when working, so as not to affect the normal work of this module or cause the short-circuit burn module.   4. Feature   1>. Advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation (PLL) make the sound quality more realistic, more stable performance, and long working frequency without deviation. 2>. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference. 3>. 30 digital volume adjustment, with buttons, easy to operate. 4>. Automatically storage data before power off. 5>. Automatic switch of speaker/headphone output. 6>. Quartz crystal steady frequency, temperature change reception frequency, no longer drift. 7>. It uses professional audio DSP to analyze and process the audio signal, and automatically mute when there is no signal or weak signal. 8>. It uses incremental digital rotary encoder to adjust the volume and frequency, using the feel is good, positioning accuracy, stable and durable, 360 ° rotating without blind Angle. 9> Support serial communication control, available computer or MCU and other devices with serial ports to control all functions of the module.   5. Instruction   1>. Power supply Module corresponding port (marked on PCB board). “-” and “+” are the anode and cathode of the power (battery). The power supply is recommended for battery or other stabilized power supply.You cannot use a power supply without filter (such as mobile phone charger, mobile power supply, and other switching power supply), otherwise the interference caused by power supply will affect the normal work of this module. The normal working voltage of this module is 3.0-5.0V, not exceeding this range. At the maximum volume of the module, the maximum power supply current is around 1A, which requires the battery to output enough current. 2>. Antenna The FM_ANT port is used to connect the FM antenna. To better receive the FM signal, it is recommended to extend the antenna with a length of 75cm. 3>. Headset/speaker output This module is with 3WX2 channel audio amplifier. If the horn is needed, access the speaker port. It is recommended to use 4 Ω / 3 w speakers.If the headset is inserted, the audio will automatically switch to the headphone channel, and the speaker channel will be closed automatically. 4>. Volume Turn the VOL encoder to adjust the volume, while the LCD screen displays the volume series. 5>. Frequency regulation Turn the FRE encoder to adjust the reception frequency, while the LCD screen displays the current frequency, and press the encoder handle to the mute/non-mute switch. 6>. Mute Press the VOL knob to switch the mute/non-mute button down. 7>. AMCAP switch Long press the FRE knob to switch on or off the AMCAP, the LCD display subtitle ON means to turn on the AMCAP, and OFF means to turn off the AMCAP. 8>. AMCAP threshold adjustment(when the AMCAP switch on) Short press the FRE knob to AMCAP threshold adjustment interface, you can adjust the movement threshold of the AMCAP according to the specific usage situation. The adjustment range is 0-20. The higher the value is, the higher the threshold is, the easier the weak signal is to be silent. Vice versa. 9>. Serial port (without serial port control) The module reserved TTL level serial port control interface. TTL serial port and this module communication need to connect the module's UART_RX, UART_TX and GND (the corresponding position of PCB is marked). You can use the external MCU or the computer serial port to send the command control module related functions. Note: because the computer serial port is not TTL level, connect the computer communication, it is necessary to connect the RS323 level to TTL power leveling device or the USB TTL level serial port module to communicate with this module. This operation requires professionals. 10>. User Settings This module can set the backlight state according to the user's specific usage. When the power is off, press the FRE button to turn on, and the B0 indicates that the backlight is always bright. B0 indicates that the backlight is closed for 20 seconds, and the setting is effective after the restart. Change the Settings state to repeat this step to switch. The backlight has no operation for 20 seconds. 11>. Stereo /mono switch terminal. Stereo/mono terminals are used to set the FM receiving mode of the module. This terminal is suspended for Stereo reception mode, and it is a single channel receiving mode.   6. FM with squelch receiver module AT instruction: Baud rate: 38400 TTL level   No. Name Example Instruction Range Return position 1 Set current frequency point AT+FRE=875 current frequency point is 87.5MHz  870-1080 MHz Current frequency point/ERR 2 Frequency point-0.1MHZ AT+FRED     Current frequency point   Le 30-août-19 à 11:05:14 Paris, le vendeur a ajouté les informations suivantes:

Caractéristiques   Built-in 2 bobines pour assurer une plus grande position de charge haute efficacité.   Affichage intelligent: les voyants LED multicolores indiquent l'état de charge.   Intégré intelligent sur la charge, court-circuit, protection contre la surchauffe.   Conception ergonomique: Conception de support de support intégrée, que vous pouvez continuer à lire ou à lire sur votre téléphone pendant le chargement.   Déposez votre téléphone sur le socle de chargement, puis chargez-le rapidement sans devoir le brancher sur un chargeur mural ou un port Lightning.   Remarque: Si vos appareils n'ont pas de fonction de recharge sans fil, vous devez acheter un récepteur de recharge sans fil.   Spécification: Norme de charge sans fil: Qi   Entrée: DC 5V / 2.0A, 9.0V / 1.8A   Sortie RX: DC5V / 1.5A Max DC9V / 1.3A Max   Fréquence: 110-205KHz   Efficacité de charge:>73% Distance de transmission: 4-10mm   REMARQUER: 1.Veuillez utiliser un adaptateur de charge rapide 9V-1.6A ou 5V / 2A et un câble de haute qualité pour assurer l'effet de charge.   2. S'il Vous Plaît ne pas connecter au dispositif à basse tension. Comme le port USB du PC qui charge le téléphone avec une vitesse lente.   Contenu de l'emballage: 1 x support de chargeur sans fil rapide, 1 x câble de chargement USB, 1 x manuel de l'utilisateur   Poids du produit: 0,111 kg   Poids du colis: 0,180 kg   Taille du produit (L xlxh): 8,00 x 6,50 x 10,00 cm   Taille de l'emballage (L xlxh): 9,50 x 7,50 x 12,00 cm