Power strip

EATON PROTECTION STRIP 6 FR POWER STRIP SOCKET 10A Consulter nos évaluations EATON PROTECTION STRIP 6 FR POWER STRIP SOCKET 10A Disponibilité: en stock Référence: PS6F PROTECTION STRIP 6 FR POWER STRIP SOCKET 10A

Dispositif de pointage Périphériques Code EAN: 5401213481368 Rubrique principale Périphériques: Dispositif de pointage En-tête / Fabricant: Cube Origine_import: All-in-one Titre: Powercube Power Strip Socket UE Plug Power Strip USB multi Smart Plug Socket - USB prise directe

Dispositif de pointage Périphériques Code EAN: 5401213481337 Rubrique principale Périphériques: Dispositif de pointage En-tête / Fabricant: Cube Origine_import: All-in-one Titre: Powercube Power Strip Socket UE Plug Power Strip USB multi Smart Plug Socket - prise directe de base

Dispositif de pointage Périphériques Code EAN: 5401213481313 Rubrique principale Périphériques: Dispositif de pointage En-tête / Fabricant: Cube Origine_import: All-in-one Titre: Powercube Power Strip Socket UE Plug Power Strip USB multi Smart Plug Socket - prise directe de base

Adaptateur d'entrée Adaptateurs d'entrée Code EAN: 6132902568112 En-tête / Fabricant: Autre Origine_import: All-in-one Titre: Powercube Power Strip Socket UE Plug Power Strip USB multi Smart Plug Socket + gris + Basic direct plug

Adaptateur d'entrée Adaptateurs d'entrée Code EAN: 6182802933633 En-tête / Fabricant: Autre Origine_import: All-in-one Titre: Powercube Power Strip Socket UE Plug Power Strip USB multi Smart Plug Socket + rouge + USB direct plug

Adaptateur d'entrée Adaptateurs d'entrée Code EAN: 6182802933619 En-tête / Fabricant: Autre Origine_import: All-in-one Titre: Powercube Power Strip Socket UE Plug Power Strip USB multi Smart Plug Socket + bleu + Basic direct plug

Adaptateur, Connectivité entrée-sortie Périphériques Code EAN: 0704843596149 Rubrique principale Périphériques: Adaptateur, Connectivité entrée-sortie En-tête / Fabricant: Générique Origine_import: hightech_minimaliste Titre: Smart Power Strip WiFi Alexa, Echo, Accueil Google, IFTTT, pour points de vente multimarques @sdongt4716

Adaptateur, Connectivité entrée-sortie Périphériques Code EAN: 0750626469971 Rubrique principale Périphériques: Adaptateur, Connectivité entrée-sortie En-tête / Fabricant: Générique Origine_import: hightech_minimaliste Titre: 2019 8 Port USB Accueil Voyage chargeur AC Power Strip Avec la charge prise UE sans fil aloha8163

Adaptateur, Connectivité entrée-sortie Périphériques Code EAN: 0750626572862 Rubrique principale Périphériques: Adaptateur, Connectivité entrée-sortie En-tête / Fabricant: Générique Origine_import: hightech_minimaliste Titre: 2020 8 Port USB Accueil Voyage chargeur AC Power Strip Avec la charge prise UE sans fil poi8163

Adaptateur, Connectivité entrée-sortie Périphériques Code EAN: 0750626469964 Rubrique principale Périphériques: Adaptateur, Connectivité entrée-sortie En-tête / Fabricant: Générique Origine_import: hightech_minimaliste Titre: 2019 8 Port USB Accueil Voyage Chargeur AC Power Strip With10W charge sans fil aloha8162

Adaptateur, Connectivité entrée-sortie Périphériques Code EAN: 0750626572855 Rubrique principale Périphériques: Adaptateur, Connectivité entrée-sortie En-tête / Fabricant: Générique Origine_import: hightech_minimaliste Titre: 2020 8 Port USB Accueil Voyage Chargeur AC Power Strip With10W charge sans fil poi8162

Accessoire réseau Périphériques réseau Code EAN: 0680664420231 En-tête / Fabricant: Générique Rubrique principale Réseau: Accessoire réseau Origine_import: hightech_minimaliste Titre: 8 Port USB Accueil Voyage chargeur AC Power Strip de charge sans fil With10W prise américaine@hpp10328

Accessoire réseau Périphériques réseau Code EAN: 0680664379454 En-tête / Fabricant: Générique Rubrique principale Réseau: Accessoire réseau Origine_import: hightech_minimaliste Titre: Smart Power Strip WiFi Alexa, Echo, Accueil Google, IFTTT, pour points de vente multimarques@hpp5614

Hama 6-Way Power Strip with Switch and Child Protection - Coupe-circuit - 230 V - connecteurs de sortie: 6 - 5 m - blanc pas cher Hama Barre multiprise 6 prises avec interrupteur et... - Meilleur service clients Rakuten en 2018 récompensé par le prix OMOTENASHI. Vendeur Rakuten depuis plus de 10 ans avec plus de 100 000 ventes. Envoi gratuit, rapide et soigné dans emballage...

Accessoires pour ordinateurs Accessoires pour ordinateurs Code EAN: 0791409644994 En-tête / Fabricant: Xiaomi Origine_import: All-in-one Titre: Xiaomi Mijia Power Strip Converter Adaptateur de prise de courant 6 prises ¿¿ prise portable avec 3 ports USB Quick Switch Port de sortie de commutateur 250V

Barre d'utilitaire Accessoires pour ordinateurs Code EAN: 0791702727660 En-tête / Fabricant: Homyl Tranche de poids: 500 g à 3 kg Titre: 2PCS ABS Cable Manegement Box Couvercle En Bois Power Strip Cord Organizer Antipoussière Divers / Type de produit: Barre d'utilitaire

Alimentation Onduleurs et périphériques d'alimentation Code EAN: 5704174259695 Général / Type de produit: Alimentation En-tête / Fabricant: MicroConnect Origine_import: hightech_minimaliste Tranche de poids: 0 à 100 g Titre: MicroConnect - 5-way Danish Power Strip 5m - Barres d'alimentation

Welcome to xglk_43 This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. PAYMENT SHIPPING Terms of Sale ABOUT US Le 15-nov.-18 à 19:16:31 Paris, le vendeur a ajouté les informations suivantes:

Welcome to xglk_43 This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. PAYMENT SHIPPING Terms of Sale ABOUT US Le 01-déc.-18 à 15:12:05 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 15-mai-19 à 07:47:26 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 04-déc.-19 à 13:40:15 Paris, le vendeur a ajouté les informations suivantes:

490mm LED Backlight Strip Kit Update 22 Inch CCFL LCD Screen To LED Monitor ZH This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Le 06-févr.-20 à 21:47:10 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 02-avr.-19 à 09:52:29 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 05-sept.-19 à 22:14:30 Paris, le vendeur a ajouté les informations suivantes:

Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable   Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 04-sept.-19 à 18:24:09 Paris, le vendeur a ajouté les informations suivantes:

EATON PROTECTION STRIP 6TEL FR POWER STRIPS 10A Consulter nos évaluations EATON PROTECTION STRIP 6TEL FR POWER STRIPS 10A Disponibilité: en stock Référence: PS6TF PROTECTION STRIP 6TEL FR POWER STRIPS 10A

540mm LED Backlight Strip Kit For 24" inch Update CCFL LCD Screen To MonitWFFR Specification: LED Strip Size: 540mm x 4mm Driver board size:7x2cm Input:DC 10-30V OutPut:7.5V-9.6V Features: * The product of the original display-specific lights, high brightness, can not look directly * LED particles close, high-density arrangement bright LED SMD imports * Long life, is a display design, the life of 100,000 hours * Easy to install, use double-sided tape can be attached to the original LCD display tank, or posted elsewhere * Energy saving, power only 8W. Original four LCD power is generally 24W. Brief installation instructions: If your monitor is a high pressure plate, this pressure plate into a direct replacement driver board like if your monitor is one of the high-voltage power supply board, then: one version of the high-pressure electricity, find 12V (capacitance), then pull swap power supply with a multimeter to find and 12V (capacitance) is connected to the negative originals off, boost board then three lines 12V, ON, GND, 12V 12V positive electrode plate with high pressure booster is integrally connected to the board, GND with negative connected, oN even oN / OFF. it is simply the original high-voltage power supply is disconnected to replace the booster plate at the front end of the original pressure to take power. The following are the installation instructions for reference (for reference only): Easy modification steps: 1, open the metal frame: 2, cut the inner plastic protective frame angle: 3, out of the liquid crystal lamp: 4, insert the LED light bar Note, this modification method is simple, easy to light leakage. But it will destroy the border. Normal method: 1, open to protect the metal frame with a simple conversion step. 2. Remove the LCD glass panel (panel carefully on soft cable, such as careless easy to qualify and broadband) 3. Remove the plastic inner frame and lighthouse (Be careful not to get dirty fouling within the backlight assembly) 4. Remove the inner lamp lighthouse 5, LED light bar affixed inside the lighthouse 6, then restore the original removal steps carefully 7. Replace the glass panels and metal frame test 8, installed lights. Package Includes: 2x LED strips 1x Driver board 1x cable Le 22-août-19 à 10:39:35 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 02-nov.-18 à 18:56:23 Paris, le vendeur a ajouté les informations suivantes:

This backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving LED particles closely, high-density arrangement,import highlight LED strips Long service life, with lifetime of 100000 hours Easy to install use double-sided adhesive can be attached to the display original LCD groove, or elsewhere Installation: If your monitor is using a inverter, then this kit replace the inveter to plug into the driver board  If your monitor is a high-voltage integrated power supply board, then: the board energized, find 12V (capacitance), and then unplug the power supply, use a multimeter to find and 12V (capacitance) Disconnect original connecting the negative terminal, the board received three line: 12V, ON, GND, the 12v of the inverter connect with 12v positive electrode of hign-voltage intergrated power supply board,GND is connected with the negative electrode, ON connect with the ON / OFF In simple terms, tThe original high voltage power supply is disconnected,instead of the inverter, In the original high-pressure front to take power VIN: voltage ENA: on/off DIM: ADJ adjust brightness GND: connecting Ground Package: 2 x LED strip 1 x Driver board 1 x cable Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.   Le 19-déc.-18 à 12:41:21 Paris, le vendeur a ajouté les informations suivantes: