Product management capacity

APC USV WEB/SNMP MANAGEMENT NETWORK CARD LAN CARD UPS AP9606 FOR SmartSLOT 77   Attention, If you have a password at startup this product will be to program by yourself and will be to make a factory restoration     PRODUCTS SOLD BY RESELLER WITH BILL PRODUIT VENDU PAR VENDEUR PROFESSIONNEL AVEC FACTURE Condition: Used / Tested Occasion testé Physical Condition: Good / état ok Warranty Provided: 90 Days / garantie de 3 mois

Inclus - 1 x HP Proliant DL180 G6 _ 4 Core 2.40GHz 16TB Specification - Processor: 1 x Intel Xeon Quad Core - Memory: 24GB (6 x 4GB DDR3 2Rx4 PC3-10600R Ram Sticks) - Storage: 16TB (8x 2TB) Product Description Capacity 2000GB / 2TB Speed 7200 RPM Cache 64 MB Interface SATA 6.0Gbps Form Factor 3.5b'"' Drive Type Hard Drive HDD Notes Ultrastar 7K3000 - PSU: 2 x 460W -... En savoir plus Collaboration commerciale.

Product InformationThe SecureStack B2 switch family delivers advanced Layer 2+ switching in a single stack with up to 360-gigabit ports or 384 10/100 ports with 32 gigabit uplinks. Reliability and availability is assured with support for Closed Loop Stacking, redundant uplink connections, redundant power options and redundant stack management. An optional policy license will be made available approximately six months after initial shipments that will allow SecureStack B2 switches to participate in Secure Networks at the network edge.SecureStack B2 switches incorporate integrated stacking ports that support up to 20 Gbps of bi-directional bandwidth between any two adjacent switches for a total of 160 Gbps of stacking bandwidth. No additional stack module is required to stack the switches. Each switch has a 160 Gbps switch fabric with 40 Gbps per switch dedicated to stacking. In an eight-switch stack, 320 Gbps of switching bandwidth is dedicated to stacking. A single stack can be comprised of any combination of SecureStack B2 switches allowing a mixture of high-density 10/100, 10/100/1000 and/or Power-over-Ethernet ports to be linked to the network core via copper, multimode fiber and/or single-mode fiber Gigabit. Closed Loop Stacking can be implemented, which assures that a single switch or cable connection failure in the stack will not impact the overall stack operation. Stack switch units can be added to or removed from the stack with minimal packet interruption. Up to eight SecureStack B2 switches can be supported in a stack with a single IP address for complete stack management. Redundant stack management is supported by assigning a primary and secondary stack manager. Product IdentifiersBrandExtreme NetworksMPNB2H12448UPC0647030014173ModelB2H124-48 Product ID (ePID)74156187 Additional Product FeaturesPower over Ethernet (PoE)YesInterfaces48 X Network-Ethernet 10base-T/100base-Texas-R&J Enterprises-45Networking TypeSwitchPorts Quantity48Connectivity TechnologyWiredRouting ProtocolIgmp, Igmpv2Remote Management ProtocolTelnet, Rmon 9, Snmp 2, Snmp 3, Tftp, Snmp, Ssh-2, Ssh, Snmp 1, Rmon 2, Rmon 3, Rmon 1Form FactorExternalMAC Address Table Size8k EntriesTypeSwitch ManagedSwitching ProtocolEthernetEthernet TechnologyEthernet, Fast Ethernet (100-Mbit/S)CompatibilityPCOTHER FeaturesVlan SupportEnclosure TypeExternal

Product SKUsMBD-C7Z370-CG-L - C7Z370-CG-L  Physical StatsForm Factor - ATX Dimensions - 12" x 9.6" (30.48cm x 24.38cm)  Processor/CacheCPU - 8th Generation Intel® Core™ i3 Processors, 8th Generation Intel® Core™ i5 Processors, 8th Generation Intel® Core™ i7 Processors. - Single Socket H4 (LGA 1151) supported, CPU TDP support Up to 120W TDP - 8th Gen Intel® Core™ desktop processors are supported with Intel® 300 Series chipset motherboards only  System MemoryMemory Capacity - Up to 64GB Unbuffered non-ECC UDIMM, DDR4-3000MHz (OC), in 4 DIMM slots Memory Type - 2666MHz/2400MHz DDR4 288-pin Non-ECC UDIMM DIMM Sizes - 4GB, 8GB, 16GB Memory Voltage - 1.2V  On-Board DevicesChipset - Intel® Z370 Express SATA - Intel® Z370 Express controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 Network Controllers - Single LAN with Intel® single Ethernet PHY i219V Audio - ALC 1220 HD Audio Graphics - DP up to 1.2; HDMI up to 1.4b  Input / OutputLAN - 1 RJ45 Gigabit Ethernet LAN ports USB - 6 USB 2.0 ports (2 rear + 4 headers), - 6 USB 3.0 ports (4 rear + 2 headers), - 2 USB 3.1 ports (+ 1 Type A + 1 Type C) Video Output - 1 DP (DisplayPort) port, 1 HDMI port, 1 DVI - D port, - DP up to 1.2; HDMI up to 1.4b Serial Port / Header - 1 COM Port (1 header) TPM - 1 TPM Header Expansion SlotsPCI-E - 2 PCI-E 3.0 x16 slots (16/NA or 8/8), - 1 PCI-E 3.0 x4, - 3 PCI-E 3.0 x1 M.2 - M.2 Interface: 1 PCI-E 3.0 x4 and 1 PCI-E 3.0 x4 - Form Factor: 2260/2280/22110, 2260/2280/22110 - Key: M-Key, M-Key (RAID 0,1 support)  System BIOSBIOS Type - 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features - ACPI 6.0 - SMBIOS 3.0 or later - UEFI 2.4 - USB Keyboard support  ManagementSoftware - SuperDoctor® 5, Watchdog Power Configurations - ACPI Power Management - Power-on mode for AC power recovery - CPU thermal trip support for processor protection  PC Health MonitoringVoltage - +1.1V, +12V, +3.3V, +5V, 1.05 (PCH), 3.3V standby, 5+2 Phase-switching voltage regulator, VBAT FAN - 5x 4-pin fan headers (up to 5 fans), 5 fans with tachometer status monitoring, Fan speed control Temperature - CPU thermal trip support, PECI LED - Standby alert LED Other Features - Chassis intrusion detection, Chassis intrusion header, Voltage and Frequency Overclocking

Product feature:   2.4 GHz wireless connection (including USB receiver and rechargeable mouse USB cable). The capacity of the built-in rechargeable battery can reach 600mA. Ergonomic design, can prevent and prevent carpal tunnel syndrome. Precision controlled optical laser technology. User convenience, wow pen signature, comfortable backrest. L / R mouse button, 2 thumb buttons and a click wheel, feed, retreat, dpi. You choose the most suitable for your hand. Plug and play, compatible with Mac and PC. 7 colors of breathing light to give users cool gaming experience.       Product specifications:   Type of project: ergonomic optical mouse. 2400 dpi resolution. Maximum working range: 10 m. Charging cable length: 50 cm. Color: black, white and gray  Material: ABS. Battery capacity: 600mAh. Button click life: 10 million times. Rated voltage / current: DC 3.7V / 18mA. System requirements: Windows 98 / Me / 2000 / XP / Vista / Win 7 / Win8 / 10 / Vista Mac OS or latest. Product weight: 103g. Item size: 76 * 135 * 42mm.       Charge step:   Plug one end of the Android charging line into the mouse charging connector and the other end into the charging port with the usb port. When charging, the power is disconnected at the on speed to charge normally. The mouse is plugged into the usb receiver, the blue light is bright when charging, indicating the blue lamp flashes when the charge is almost full. The blue lamp went out after the electricity was full. Charging time is 6-8 hours, do not use when turn off the mouse switch!     Package Included:   1 x Mouse. 1 x USB power adapter. 1 x USB charging cable. 1 x user manual.  

Product Information Product IdentifiersBrandExtreme NetworksMPNB2H12448UPC0647030014173ModelB2H124-48 Product ID (ePID)74156187 Additional Product FeaturesPower over Ethernet (PoE)YesInterfaces48 X Network-Ethernet 10base-T/100base-Texas-R&J Enterprises-45Networking TypeSwitchPorts Quantity48Connectivity TechnologyWiredRouting ProtocolIgmp, Igmpv2Remote Management ProtocolTelnet, Rmon 9, Snmp 2, Snmp 3, Tftp, Snmp, Ssh-2, Ssh, Snmp 1, Rmon 2, Rmon 3, Rmon 1Form FactorExternalMAC Address Table Size8k EntriesTypeSwitch ManagedSwitching ProtocolEthernetEthernet TechnologyEthernet, Fast Ethernet (100-Mbit/S)CompatibilityPCOTHER FeaturesVlan SupportEnclosure TypeExternal

Product Identifiers - BRAND Micron - MPN MT4HTF3264HY667B3 - Product ID (ePID) 1200257169 Product Key Features - Capacity per Module 256 MB - Type DDR2 SDRAM - Number of Modules 1 - Number of Pins 200 - Bus Speed PC2-5300 (DDR2-667) - Form Factor SO-DIMM

Product 1x G.SKILL 8 GB DDR3 1333MHz CL9 RAM stick. The RAM has been tested under memtest and is fully working. This product is shipped in an antistatic bag. Specifications Memory Type DDR3 Capacity 8GB (8GBx1) Multi-Channel Kit Single Channel Kit Tested Speed 1333MHz Tested Latency 9-9-9-24-2N Tested Voltage 1.50V Registered/Unbuffered Unbuffered Error Checking Non-ECC

Product Description Salicru SNMP CARD GX5S CS141MINI This is why installation of an Ethernet Network card in the UPS is necessary, so that it can autonomously manage the different functions required by our computer network. Salicru has a complete range of Ethernet / SNMP network cards with different functions, to meet our clients' requirements. Technical Specification Salicru SNMP CARD GX5S CS141MINI General Device Type Remote management adapter Form Factor Plug-in module Networking Connectivity Technology Wired Data Link Protocol Ethernet, RS-232 Remote Management Protocol SNMP 2, SNMP 3 Compatible products: SPS ADV T, SPS ADV R, SPS ADV RT2, SLC TWIN RT2, SLC TWIN PRO2

Product Technical Specification SKU HFS128G39TNF-N2A0A Brand SK-hynix SSD Capacity 128GB Bundle Type Stand Alone Drive Read Speed Up To 540MB/s Write Speed Up To 530MB/s Dimensions 100mm x 70mm x 7mm NAND 3D TLC NAND Operating Temperature 0°C to 70°C Weight 100g Product Type/Family SSD

Product Description IBM 3580-S5E 1.5/3.0TB Ultrium LTO-5 External SAS Tape Drive TS2250 3580-H5S Key Features - 1.5TB Native / 3.0TB Compressed Capacity - 6Gbps Serial Attached SCSI Interface - Half Height Form Factor

Product DescriptionSophos AP10 - wireless access pointDevice TypeWireless access pointForm FactorExternal Data Link ProtocolIEEE 802.11b, IEEE 802.11g, IEEE 802.11nFrequency Band2.4 GHzPerformanceThroughput: 150 MbpsCapacityMaximum number of users: 10PowerAC 120/230 V (50/60 Hz)Dimensions (WxDxH)4.9 in x 3.8 in x 1 in Connectivity TechnologyWirelessData Link ProtocolIEEE 802.11b, IEEE 802.11g, IEEE 802.11nFrequency Band2.4 GHzPerformanceThroughput: 150 MbpsCapacityMaximum number of users: 10Status IndicatorsPower, WLAN, LANFeaturesFirmware upgradable, wall mountable, RADIUS supportEncryption AlgorithmWPA, WPA2, WEPAuthentication MethodRADIUSCompliant StandardsIEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n Interfaces1 x 100Base-TX - RJ-45 Compliant StandardsVCCI, MIC, FCC, EN 60950-1, FCC CFR47 Part 15 C, ANSI C63.4-2003, EN 300 328, EN 301 489-1, EN 301 489-17 Power Consumption Operational8 Watt Voltage RequiredAC 120/230 V (50/60 Hz) Antenna AntennaExternal detachableAntenna Qty1Gain Level2 dBi - Plug and Play deployment Set up multiple wireless access points within minutes. Sophos access points require no local configuration. Deploying Sophos access points is easy. Simply plug in the Sophos access point anywhere on your LAN. The access point will find the controller, retrieve its IP address via DHCP, and import the configuration. The device automatically appears in the Sophos UTM user interface. - Strong encryption Sophos UTM wireless protection supports the strongest encryption and authentication standards available. Wireless connections are completely secure. To prevent unauthorized wireless access, Sophos UTM wireless protection supports the most advanced encryption and authentication standards available today. It features WPA2-Enterprise in combination with IEEE 802.1X. This proven block-based encryption standard provides the highest level of assurance that data is protected. Also, monitoring capabilities in Sophos UTM allow administrators to easily detect failed authentication attempts. - Integrated security Sophos access points seamlessly integrate into the Sophos UTM appliance for complete UTM security. Sophos access points forward wireless traffic to the Sophos UTM appliance, where all security applications run. The wireless clients obtain the same level of UTM security as if they were physically connected to the LAN. Sophos UTM wireless protection simplifies the operation of reliable and secure wireless networks. The Sophos UTM appliance works as a wireless controller to centralize wireless network management and security. Sophos access points are automatically set up and configured by the UTM appliance.

HP Smart Array P822/2GB. Product features Feature Description Storage interface(SAS/SATA) - PCI-e 3.0 (8 GT/s) - Eight lane mechanical connector - Electrically supports one, four, and eight lanes Host interface (PCI-e) P822 includes a PMC-Sierra SRCv 8x6G SAS RAID-on-chip featuring: - Eight SAS/SATA physical links, each supporting 6, 3, and 1.5 Gb/s for SAS protocol and 6 and 3 Gb/s for SATA protocol - Eight PCI-e 3.0 lanes each supporting 5 Gb/s - DDR3-1333 memory controller - High performance MIPS-based multi-processor subsystem - Hardware XOR and Reed-Solomon Engines for RAID 5 and RAID 6 acceleration RAID Processor and expander The P822 2GB array accelerator features a flash-backed write cache Number of drives supported 227 drives RAID Levels RAID 0, 1, 1+0, 5, 6, 50, and 60 Interface speeds P822 supports the latest interface speed: Interface Maximum Bandwidth Notes PCI-e 8 GB/s (in each direction) PCI-e 3.0 (8 lanes at 1 GT/s) SAS/SATA 14.4 GB/s (in each direction) SAS-2 (24 physical links at 6 Gb/s) RAID cache 2 GB/s DDR3-1600 MHz SDRAM (64-bit data and 8-bit ECC) Online management features - Online capacity expansion (increase array size feature) - Advanced capacity expansion (shrink array and move array features) - Online RAID Level migration (change the fault tolerance level of a configured logical drive) - Online stripe size migration (change the stripe size of a configured logical drive) - User selectable stripe size - User selectable read and write cache sizes - Logical drive extension (increase logical drive size without disturbing data) Availability Provides increased server uptime by providing advanced storage functionality: - Online RAID Level migration (between any RAID level) - Online capacity expansion - Logical drive capacity extension - Global online spare - Pre-Failure warranty Fault recovery Minimizes downtime, reconstructs data, and facilitates a quick recovery from drive failure Dual domain support HP drives are specifically designed and tested for flawless operation in HP equipment. The integration of solid state drives in HP systems means that associated components are right for the ProLiant server. Ease of use Consistency and Upgradeability make the Smart Array family unique in the industry: - GUI based configuration, management and diagnostic software tools - Common data format between generations of products - Data migration between servers and external Modular Smart Array enclosures Software overview Feature Description Operating systems - Microsoft Windows Server - Microsoft Windows Server Hyper-V - Red Hat Enterprise Linux (RHEL) - SUSE Linux Enterprise Server (SLES) - VMware Software suite - HPE Systems Insight Manager (SIM) - HPE Array Configuration Utility (ACU) - CPQONLIN - HPE Option ROM Configuration for Arrays (ORCA) - HPE Array Diagnostic Utility (ADU) - HPE Smart Array SAS/SATA Event Notification Service (CISSESRV)

Lot 2 cartes mère x10sdv-4c-tln2f ver1.02 - 4 cores,8 threads Intel® Xeon® processor D-1520 occasion - fonctionnelles - retour sous 7 jours accepté Key Features Intel® Xeon® processor D-1520, Single socket FCBGA 1667; 4-Core, 8 Threads, 45W System on Chip Up to 128GB ECC RDIMM DDR4 2133MHz or 64GB ECC/non-ECC UDIMM in 4 sockets 1 PCI-E 3.0 x16, M.2 PCI-E 3.0 x4 (SATA support), M Key 2242/2280 2 10GbE LAN ports 6 SATA3 (6Gbps) ports via SoC 2 USB 3.0 ports (rear) 4 USB 2.0 ports (via headers) 1 SuperDOM, 1 COM, TPM header, GPIO and SMbus headers 12V DC Input and ATX Power Source Product SKUs MBD-X10SDV-4C-TLN2F X10SDV-4C-TLN2F Physical Stats Form Factor Mini-ITX Dimensions 6.7" x 6.7" (17.02cm x 17.02cm) Processor/Cache CPU Intel® Xeon® Processor D-1520. Single Socket FCBGA1667 supported, CPU TDP support 45W Cores / Cache 4 cores, 8 threads / 6MB cache System Memory Memory Capacity Up to 128GB Registered ECC RDIMM, DDR4-2133MHz Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots Memory Type 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM DIMM Sizes 4GB, 8GB, 16GB, 32GB Memory Voltage 1.2V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices Chipset System on Chip SATA SoC controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 RSTe IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Network Controllers Dual LAN with 10Gbase-T Dual LAN with SoC Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) Graphics Aspeed AST2400 BMC Input / Output SATA 6 SATA3 (6Gbps) port LAN 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port USB 4 USB 2.0 ports (4 headers, Type A)) 2 USB 3.0 ports (2 rear) Video Output 1 port Serial Port / Header 1 COM Port (1 header) TPM TPM Header Expansion Slots PCI-E 1 PCI-E 3.0 x16 M.2 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280 System BIOS BIOS Type 128Mb SPI Flash with AMI BIOS BIOS Features PCI 3.0 ACPI 5.0 USB Keyboard support Hardware BIOS Virus protection RTC (Real Time Clock) Wakeup SMBIOS 2.8 UEFI 2.4 Management Software Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog Power Configurations ACPI Power Management CPU Fan auto-off in sleep mode Power-on mode for AC power recovery PC Health Monitoring Voltage +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, HT, Memory, Memory Voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature FAN 4x 4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, System level control, Thermal control tachometer fan connectors Temperature Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI LED CPU / System Overheat LED Other Features 12V DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL Operating Environment Operating Temperature Range 0°C ~ 60°C (32°F ~ 140°F)

RAD passif - vendue sans accessoires Key Features 1. Intel® Xeon® processor D-1521, Single socket FCBGA 1667; 4-Core, 8 Threads, 45W 2. System on Chip 3. Up to 128GB ECC RDIMM DDR4 2133MHz or 64GB ECC/non-ECC UDIMM in 4 sockets 4. 1 PCI-E 3.0 x16, M.2 PCI-E 3.0 x4 (SATA support), M Key 2242/2280 5. 2 10GbE LAN ports 6. 6 SATA3 (6Gbps) ports via SoC 7. 2 USB 3.0 ports (rear) 4 USB 2.0 ports (via headers) 8. 1 SuperDOM, 1 COM, TPM header, GPIO and SMbus headers 9. 12V DC Input and ATX Power Source Product SKUs MBD-X10SDV-4C-TLN2F - X10SDV-4C-TLN2F Physical Stats Form Factor - Mini-ITX Dimensions - 6.7b'"' x 6.7b'"' (17.02cm x 17.02cm) Processor/Cache CPU - Intel® Xeon® Processor D-1521. - Single Socket FCBGA1667 supported, CPU TDP support 45W Cores / Cache - 4 cores, 8 threads / 6MB cache System Memory Memory Capacity - Up to 128GB Registered ECC RDIMM, DDR4-2133MHz - Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots Memory Type - 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM DIMM Sizes - 4GB, 8GB, 16GB, 32GB Memory Voltage - 1.2V Error Detection - Corrects single-bit errors - Detects double-bit errors (using ECC memory) On-Board Devices Chipset - System on Chip SATA - SoC controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 - RSTe IPMI - Support for Intelligent Platform Management Interface v.2.0 - IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Network Controllers - Dual LAN with 10Gbase-T Dual LAN with SoC Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) Graphics - Aspeed AST2400 BMC Input / Output SATA - 6 SATA3 (6Gbps) port LAN - 2 RJ45 10GBase-T ports - 1 RJ45 Dedicated IPMI LAN port USB - 4 USB 2.0 ports (4 headers, Type A)) - 2 USB 3.0 ports (2 rear) Video Output - 1 port Serial Port / Header - 1 COM Port (1 header) TPM - TPM Header Expansion Slots PCI-E - 1 PCI-E 3.0 x16 M.2 - 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280 System BIOS BIOS Type - 128Mb SPI Flash with AMI BIOS BIOS Features - PCI 3.0 - ACPI 5.0 - USB Keyboard support - Hardware BIOS Virus protection - RTC (Real Time Clock) Wakeup - SMBIOS 2.8 - UEFI 2.4 Management Software - Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog Power Configurations - ACPI Power Management - CPU Fan auto-off in sleep mode - Power-on mode for AC power recovery PC Health Monitoring Voltage - +1.8V, +12V, +3.3V, +5V, Chassis intrusion header, HT, Memory, Memory Voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature FAN - 4x 4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, System level control, Thermal control tachometer fan connectors Temperature - Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI LED - CPU / System Overheat LED Other Features - 12V DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL Operating Environment Operating Temperature Range - 0°C ~ 60°C (32°F ~ 140°F) En savoir plus Collaboration commerciale.